This page provides an overview of Subpart FF reporting through e-GGRT. More detailed information regarding Subpart FF reporting can be found in the Subpart FF Webinar
Once you have added Subpart FF to the list of subparts you will report and have clicked on the "Open" link next to Subpart FF, you will see the following screen:
Click image to expand
Subpart FF Reporting Form
Please see Reporting Form Instructions on downloading the blank reporting form and uploading the completed reporting form.
- Introduction
- Degas Collection
- Well and Shaft
- Ventilation Quarterly
- Degas Quarterly
- Degas Weekly
- Destruction or Offsite
- Destruction or Offsite Quarterly
- Destruction or Offsite Weekly
- Emission Summary
- Inputs Whose Reporting Deadline Was Deferred Until 2013
Some Subpart FF reporters may be required to report under Subpart C (General Stationary Fuel Combustion Sources) and/or Subpart W (Petroleum and Natural Gas Systems). You may use EPA’s Applicability Tool to determine the subparts that apply to your facility.
Completed Subpart FF Reporting Form
After you have successfully uploaded your completed Subpart FF reporting form, the page will be updated to reflect the file you have uploaded. During the upload, e-GGRT will generate a validation report which will list potential deficiencies or issues with your reporting form.
Click image to expand
If you attempt to upload a file but your file is not accepted by e-GGRT, it is generally because your file has a fatal flaw or is missing essential data. The reason why the file was not acceptable is displayed as a screen error on the upload page. For an example of a screen error message, see below.
Click image to expand
Click on the Subpart FF: View Validation link to review your validation report. An explanation of the validation report and the process for correcting validation issues prior to submission is presented in Reporting Form Validation.
Once you have addressed the validation issues to the extent you believe necessary, and once you have completed any other applicable subparts, you must generate, review, certify, and submit your annual report as described in How to Submit an Annual Report. Please be sure that you complete your submission by certifying your submission using you password and confirmation question.
Additional Resources:
- Subpart FF Rule Guidance
- Subpart FF Rule Language (eCFR)
- Part 98 Terms and Definitions
- Frequently Asked Questions (FAQs)
- Webinar Slides