Is the product entering the facility or leaving the facility?

For refineries, select "In" if the product is entering the refinery or "Out" if the product is leaving the refinery. For importer/exporter facilities, select "Import" if the product is being imported or "Export" if the product is being exported.

Product Name Code

Select the Product Name Code corresponding to products listed on Table MM-1 and Table MM-2. (Refer to tab "6. Tables MM-1 and MM-2", a link to this tab is provided above the column header).

Measured Quantity Units

Select unit of measure for the Product Annual Quantity: barrels (BBL) or metric tons (MT)

Product Annual Quantity

Enter the quantity of the product in the units specified. This quantity should include any quantities reported in "4. Table 2 - Components of Blended Products on the "Blended Products" tab that have the same product name reported in this worksheettab.

Percent Petroleum Based

Enter the percent of the product that is petroleum based. For example, enter '0' for biomass feedstock and enter '100' for products that were not produced by blending a petroleum-based product with a biomass feedstock.

Annual CO₂ Quantity, (MT)

Enter annual CO2 CO₂ emissions in metric tons (MT) that would result from complete combustion or oxidation of the product. This quantity should NOT include CO2 CO₂ emissions resulting from individual components reported in on the "4. Blended Products" tab."

Is Calculation Method 2 Used for this Product?

Select 'Yes' if Calculation Method 2 is used to determine the emission factor for this product; Select 'No' if Calculation Method 2 is not used.

Number of Samples

Enter If Calculation Method 2 is used, enter number of samples collected according to 98.394(c) for use in Calculation Method 2, if used.

Sampling Standard Method Used

Enter sampling standard method used for If Calculation Method 2 , if is used, enter sampling standard method used.

Carbon Share (mass %)

Enter If Calculation Method 2 is used, enter the carbon share test results (mass %) for Calculation Method 2, if used.

Standard Method Used to Test Carbon Share

Enter If Calculation Method 2 is used, enter standard method used to test carbon share for Calculation Method 2, if used.

Calculated CO2 Quantity Emission Factor

Enter calculated CO2 emission factor for If Calculation Method 2 , if usedis used, enter calculated CO₂ emission factor.

Calculated CO2 Quantity Emission Factor Units

Select If Calculation Method 2 is used, select unit of measure for the emission factor for Calculation Method 2, if used: metric tons CO2 CO₂ per barrel, or metric tons CO2 CO₂ per metric ton of product.

Density Test Results (metric tons/ barrel)

Enter If Calculation Method 2 is used, enter density test results in units of metric tons per barrel for Calculation Method 2, if used.

Standard Method Used to Test Density

Enter If Calculation Method 2 is used, enter standard method used to test density for Calculation Method 2, if used.