This page provides an overview of the "2. Aggregate Products" tab on the Subpart MM reporting form.
Please see Reporting Form Instructions for instructions on downloading the blank reporting form and uploading the completed reporting form. The Aggregate Products tab is applicable to refineries, importers, and exporters.
This worksheet replaces OTAQ Form GHG0201.
Complete one row for each product entering or leaving the facility:
The following table provides instructions for reporting each data element in the Aggregate Products tab:
Data Element |
Instructions |
|---|---|
Is the product entering the facility or leaving the facility? |
For refineries, select "In" if the product is entering the refinery or "Out" if the product is leaving the refinery. For importer/exporter facilities, select "Import" if the product is being imported or "Export" if the product is being exported. |
Product Name Code |
Select the Product Name Code corresponding to products listed on Table MM-1 and Table MM-2. (Refer to tab "6. Tables MM-1 and MM-2", a link to this tab is provided above the column header). |
Measured Quantity Units |
Select unit of measure for the Product Annual Quantity: barrels (BBL) or metric tons (MT) |
Product Annual Quantity |
Enter the quantity of the product in the units specified. This quantity should include any quantities reported in "4. Blended Products" that have the same product name reported in this worksheet. |
Percent Petroleum Based |
Enter the percent of the product that is petroleum based. For example, enter '0' for biomass feedstock and enter '100' for products that were not produced by blending a petroleum-based product with a biomass feedstock. |
Annual CO2 Quantity, (MT) |
Enter annual CO2 emissions in metric tons (MT) that would result from complete combustion or oxidation of the product. This should NOT include CO2 emissions resulting from individual components reported in "4. Blended Products." |
Is Calculation Method 2 Used for this Product? |
Select 'Yes' if Calculation Method 2 is used to determine the emission factor for this product; Select 'No' if Calculation Method 2 is not used. |
Number of Samples |
Enter number of samples collected according to 98.394(c) for use in Calculation Method 2, if used. |
Sampling Standard Method Used |
Enter sampling standard method used for Calculation Method 2, if used. |
Carbon Share (mass %) |
Enter the carbon share test results (mass %) for Calculation Method 2, if used. |
Standard Method Used to Test Carbon Share |
Enter standard method used to test carbon share for Calculation Method 2, if used. |
Calculated CO2 Quantity Emission Factor |
Enter calculated CO2 emission factor for Calculation Method 2, if used. |
Calculated CO2 Quantity Emission Factor Units |
Select unit of measure for the emission factor for Calculation Method 2, if used: metric tons CO2 per barrel, or metric tons CO2 per metric ton of product. |
Density Test Results (metric tons/ barrel) |
Enter density test results in units of metric tons per barrel for Calculation Method 2, if used. |
Standard Method Used to Test Density |
Enter standard method used to test density for Calculation Method 2, if used. |