...

Step A1: Flow Meter Information

Wiki Markup{

{cloak}

none

To add a flow meter, click the link labeled “ADD a Flow Meter” located below the FLOW METERS table.

{toggle-cloak:id=PNG2}

{cloak}

none

The following information is required for each individual flow meter on this screen:

...

When finished, click SAVE. You will be returned to the OVERVIEW screen, which will display the flow meter information you just saved.

Wiki Markup{

{cloak}

none

Repeat this step until you have added all flow meters. Once all flow meters used at your facility have been added to the table, click OPEN to enter measurement data for each flow meter.

...

Step A2.1: Equation PP-1 (mass-based measurements)

Wiki Markup{

none
Wiki Markup
{cloak}

This page will be blank until you enter more data in subsequent screens. Use the radio buttons to select whether you would like to report results calculated by e-GGRT or enter your own results. If you choose to enter your own results, enter the value in the text box that is displayed below the radio buttons.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

{cloak}

none

Use the text boxes Use the text boxes to enter the mass of the CO₂ stream (in metric tons) for this flow meter in each quarter of the reporting year.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

{cloak}

none

Use the text boxes to enter the concentration of the CO₂ stream (in weight percent CO₂) for this flow meter in each quarter of the reporting year and the name of the standard used to measure CO₂ concentration. Express the concentration as a decimal fraction (e.g., enter 0.9 for a concentration of 90 percent). If you used more than one standard during the reporting year, enter them all.

When finished, click SUMMARY.

{toggle-cloak:id=PNG7}

{cloak}

none

To view the validation page for Equation PP-1, click the link labeled “View Validation.”

...

Step A2.2: Equation PP-2 (volume-based measurements)

Wiki Markup{

{cloak}

none

Use the radio buttons to select whether you would like to report results calculated by e-GGRT or enter your own results. If you choose to enter your own results, enter the value in the text box that is displayed below the radio buttons.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

none
Wiki Markup
{cloak}

Use the text boxes to enter the volume of the CO₂ stream (in standard cubic meters) for this flow meter in each quarter of the reporting year.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

{cloak}

none

This screen is for This screen is for the density (metric tons per standard cubic meter) for this flow meter in each quarter of the reporting year.

...

When finished, click NEXT.unmigrated-inline-wiki-markup

{

{cloak}

none

Use the text boxes to enter the concentration of the CO₂ stream (in weight percent CO₂ or volume percent CO₂ depending on the flow meter measurement type selected on the Add/Edit Flow Meter page) for this flow meter in each quarter of the reporting year and the name of the standard used to measure CO₂ concentration. Express the concentration as a decimal fraction (e.g., enter 0.9 for a concentration of 90 percent). If you used more than one standard during the reporting year, enter them all.

When finished, click NEXT.

{toggle-cloak:id=PNG12}

{cloak}

none

To view the validation page for Equation PP-2, click the link labeled “View Validation.”

...

Step A3.1: Equation PP-3a (aggregation for flow meters with no segregation)

Wiki Markup{

{cloak}

none

To view the results of Equation 3a, on the Subpart Overview page click VIEW SUMMARY.

Wiki Markup{

none
Wiki Markup
{cloak}

To return to the Subpart Overview page once you have reviewed the facility-level data, click BACK.

Step A3.2: Equation PP-3b (aggregation for flow meters with segregation)

...

{

Toggle Cloak

:

id

=

PNG15

}Click image Click this link to expand

{cloak:id=PNG15|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG15	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

To view the results To view the results of Equation 3b, on the Subpart Overview page click VIEW SUMMARY.unmigrated-inline-wiki-markup

{

Toggle Cloak

:

id

=

PNG16

}Click image Click this link to expand

{cloak:id=PNG16|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG16	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

To return to the Subpart Overview page once you have reviewed the facility-level data, click BACK.

...

Step B1: Flow Meter Information

{toggle-cloak:id=PNG17}

{cloak}

none

To add a flow meter, click the link labeled “ADD a Flow Meter” located below the FLOW METERS table on the Subpart Overview page.

Wiki Markup{

{cloak}

none

The following information is required for each individual flow meter on this screen:

...

When finished, click SAVE. You will be returned to the OVERVIEW screen, which will display the flow meter information you just saved.unmigrated-inline-wiki-markup

{

none
Wiki Markup
{cloak}

Repeat this step until you have added all flow meters. Once all flow meters used at your facility have been added to the table, click OPEN to enter measurement data for each flow meter.

...

Step B2.1: Equation PP-1 (mass-based measurements)

...

{

Toggle Cloak

:

id

=

PNG20

}Click image Click this link to expand

{cloak:id=PNG20|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG20	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

This page will be This page will be blank until you enter more data in subsequent screens. Use the radio buttons to select whether you would like to report results calculated by e-GGRT or enter your own results. If you choose to enter your own results, enter the value in the text box that is displayed below the radio buttons.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

Toggle Cloak

:

id

=

PNG21

}Click image Click this link to expand

{cloak:id=PNG21|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG21	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

Use the text boxes to enter the mass of the CO₂ stream (in metric tons) for this flow meter in each quarter of the reporting year.

When finished, click NEXT.

Toggle Cloak
id PNG22

Click this link

Wiki Markup
{toggle-cloak:id=PNG22}

Click image to expand

{cloak:id=PNG22|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG22	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

Use the text boxes to enter the concentration of the CO₂ stream (in weight percent CO₂) for this flow meter in each quarter of the reporting year and the name of the standard used to measure CO₂ concentration. Express the concentration as a decimal fraction (e.g., enter 0.9 for a concentration of 90 percent). If you used more than one standard during the reporting year, enter them all.

When finished, click SUMMARY.

Wiki Markup{

Toggle Cloak

:

id

=

PNG23

}Click image Click this link to expand

{cloak:id=PNG23|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG23	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

To view the validation page for Equation PP-1, click the link labeled “View Validation.”

...

Step B2.2: Equation PP-2 (volume-based measurements)

Wiki Markup{

none
Wiki Markup
{cloak}

Use the radio buttons to select whether you would like to report results calculated by e-GGRT or enter your own results. If you choose to enter your own results, enter the value in the text box that is displayed below the radio buttons.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

{cloak}

none

Use the text boxes Use the text boxes to enter the volume of the CO₂ stream (in standard cubic meters) for this flow meter in each quarter of the reporting year.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

{cloak}

none

This screen is for the density (metric tons per standard cubic meter) for this flow meter in each quarter of the reporting year.

...

When finished, click NEXT.

{toggle-cloak:id=PNG27}

{cloak}

none

Use the text boxes to enter the concentration of the CO₂ stream (in weight percent CO₂ or volume percent CO₂ depending on the flow meter measurement type selected on the Add/Edit Flow Meter page) for this flow meter in each quarter of the reporting year and the name of the standard used to measure CO₂ concentration. Express the concentration as a decimal fraction (e.g., enter 0.9 for a concentration of 90 percent). If you used more than one standard during the reporting year, enter them all.

When finished, click NEXT.

Wiki Markup{

{cloak}

none

To view the validation page for Equation PP-2, click the link labeled “View Validation.”

...

Step B3.1: Annual CO₂ Extracted

...

{

Toggle Cloak

:

id

=

PNG29

}Click image Click this link to expand

{cloak:id=PNG29|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG29	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

To enter aggregated GHG information, find the AGGREGATED GHG INFORMATION table and click OPEN.

Wiki Markup{

Toggle Cloak

:

id

=

PNG30

}Click image Click this link to expand

{cloak:id=PNG30|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG30	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

Use the text box to enter the total annual mass of CO₂ extracted (in metric tons) at your facility. Ensure that the value you enter here is equal to the sum of CO₂ through all flow meters you use, as listed on the Subpart Overview page.

...

Step B3.2: Annual CO₂ Imported and Exported

...

{

Toggle Cloak

:

id

=

PNG31

}Click image Click this link to expand

{cloak:id=PNG31|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG31	cloak.toggle.type

Panel
Image Removed

none
Wiki Markup
{cloak}

To enter aggregated GHG information, find the AGGREGATED GHG INFORMATION table and click OPEN.

Wiki Markup{

Toggle Cloak

:

id

=

PNG32

}Click image to expand
Image Removed Click this link to expand
Image Added

{cloak:id=PNG32|cloak.toggle.type=none|zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG32	cloak.toggle.

Panel
Image Removed

Wiki Markup
{cloak}

type none

Use the text boxes to enter the total annual mass of CO₂ imported and exported (in metric tons) at the corporate level. Enter a value of “0” for the total annual mass of CO₂ imported if you exported only, and vice versa. Ensure that the value you enter here as imported is equal to the sum of CO₂ through all import flow meters you use, as listed on the Subpart Overview page. Ensure the same for the exported value.

...

Step C1: CO₂ Stream Information

Wiki Markup{

type none
Wiki Markup
{cloak}

To add a CO₂ stream supplied in containers, click the link labeled “ADD a CO₂ Stream” located below the CO₂ STREAMS table.

Wiki Markup{

none
Wiki Markup
{cloak}

The following information is required for each CO₂ stream supplied in containers on this screen:

...

When finished, click SAVE. You will be returned to the OVERVIEW screen, which will display the flow meter information you just saved.unmigrated-inline-wiki-markup

{

{cloak}

none

Repeat this step until you have added all CO₂ streams. Once all CO₂ streams at your facility have been added to the table, click OPEN to enter measurement data for each CO₂ stream.

...

Step C2.1: Equation PP-1 (mass-based measurements)

Wiki Markup{

{cloak}

none

This page will be blank until you enter more data in subsequent screen. Use the radio buttons to select whether you would like to report results calculated by e-GGRT or enter your own results. If you choose to enter your own results, enter the value in the text box that is displayed below the radio buttons.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

PNG37 cloak.toggle.type none
Wiki Markup
{cloak}

Use the text boxes to enter the mass of the CO₂ stream (in metric tons) in each quarter of the reporting year.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

zone true id PNG38 cloak.toggle.type none
Wiki Markup
{cloak}

Use the text boxes to enter the concentration of the CO₂ stream (in weight percent CO₂) in each quarter of the reporting year and the name of the standard used to measure CO₂ concentration. Express the concentration as a decimal fraction (e.g., enter 0.9 for a concentration of 90 percent). If you used more than one standard during the reporting year, enter them all.

When finished, click SUMMARY.unmigrated-inline-wiki-markup

{

{cloak}

none

To view the validation page for Equation PP-1, click the link labeled “View Validation.”

...

Step C2.2: Equation PP-2 (volume-based measurements)

Wiki Markup{

{cloak}

none

Use the radio buttons to select whether you would like to report results calculated by e-GGRT or enter your own results. If you choose to enter your own results, enter the value in the text box that is displayed below the radio buttons.

When finished, click NEXT.

Wiki Markup{

Image Removed

Image Added

PNG41 cloak.toggle.type none
Wiki Markup
{cloak}

Use the text boxes to enter the volume of the CO₂ stream (in standard cubic meters) in each quarter of the reporting year.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

PNG142 cloak.toggle.type none
Wiki Markup
{cloak}

This screen is for the density (metric tons per standard cubic meter) for this CO₂ stream supplied in containers in each quarter of the reporting year.

...

If you selected the flow meter measurement type as “concentration in volume percentage” on the Add/Edit CO₂ stream page, populated text boxes will be displayed with the density of CO₂ that is required in the rule (0.001868 metric tons per standard cubic meter). A text box for the standard used to measure CO₂ density will not be displayed.
When finished, click NEXT.unmigrated-inline-wiki-markup

{

none
Wiki Markup
{cloak}

Use the text boxes to enter the concentration of the CO₂ stream (in weight percent CO₂ or volume percent CO₂ depending on the CO₂ stream measurement type selected on the Add/Edit CO₂ Stream page) in each quarter of the reporting year and the name of the standard used to measure CO₂ concentration. Express the concentration as a decimal fraction (e.g., enter 0.9 for a concentration of 90 percent). If you used more than one standard during the reporting year, enter them all.

When finished, click NEXT.unmigrated-inline-wiki-markup

{

{cloak}

none

To view the validation page for Equation PP-2, click the link labeled “View Validation.”

...

Step C3: Equation PP-3a (aggregation of CO₂ streams)

Wiki Markup{

{cloak}

none

To view the results of Equation 3a, on the Subpart Overview page click VIEW SUMMARY.unmigrated-inline-wiki-markup

{

Image Removed

Image Added

PNG46 cloak.toggle.type none
Wiki Markup
{cloak}

To return to the Subpart Overview page once you have reviewed the facility-level data, click BACK.

Supplier Type D:  Importers and Exporters That Use Containers

Wiki Markup{

zone true id PNG47 cloak.toggle.type none
Wiki Markup
{cloak}

Subpart PP requires importers and exporters that supply CO₂ in containers to report the following information at the corporate level:

...

To enter CO₂ import and export data, click OPEN in the ALL CONTAINERS table on the Subpart Overview page.unmigrated-inline-wiki-markup

{

{cloak}

none

Use the text boxes to enter the total annual mass of CO₂ imported and exported (in metric tons) at the corporate level. Enter a value of “0” for the total annual mass of CO₂ imported if you exported only, and vice versa.

When finished, click SAVE.

#Back Back to Top

See Also

Screen Errors
Using e-GGRT to Prepare Your Subpart PP Report
Subpart PP Summary Information for this Supplier
Subpart PP Product and Equipment Information
Subpart Validation Report