Subpart E Unit Information for an Administrator-Approved Alternative Method
Skip to end of metadata
Go to start of metadata

This page provides a step-by-step description of how to add unit information for a subpart E adipic acid production facility for which an Administrator-approved alternative method is used to estimate emissions.

Step 1. Add an Adipic Acid Production Unit

From the Subpart E Overview page, click on the Add a Unit link beneath the UNIT SUMMARY table.

Click this link to expand

This action takes you to the Add/Edit Unit page shown below.

Click this link to expand

Step 2. Enter Unit Information

Enter the following information on the Add/Edit Unit page:

Click on SAVE to return to the Subpart E Overview page.


Repeat Steps 1 and 2 for each adipic acid production unit at your facility.


Back to Top

See Also

Screen Errors
Using e-GGRT to Prepare Your Subpart E Report
Subpart E Estimation Methodology
Subpart E Unit Information for the Site-Specific Emission Factor and Production Data Method
Subpart E Unit Information for an Administrator-Approved Alternative Method
Subpart E Summary Information for the Site-Specific Emission Factor and Production Data Method
Subpart E Summary Information for an Administrator-Approved Alternative Method
Subpart Validation Report

This web site is maintained by a contractor to the U.S. Environmental Protection Agency (RY2021.R.02)