Subpart E Summary Information for an Administrator-Approved Alternative Method
Skip to end of metadata
Go to start of metadata

This page provides a step-by-step description of how to add summary information, including emissions, for a subpart E adipic acid production facility for which an Administrator-approved alternative method is used to estimate emissions. 

From the Subpart E Overview page, click open in the SUBPART E SUMMARY INFORMATION FOR THIS FACILITY table.

Click this link to expand

 

This action will take you to the Subpart E Summary Information page shown below. 

Click this link to expand

 

Enter the following information on the Subpart E Summary Information page:

  • In the ANNUAL EMISSIONS section:
    • Annual N2O emissions from adipic acid production (metric tons)
    • Annual N2O emissions from adipic acid production that is sold or transferred off site (metric tons) 
  •  In the ABATEMENT TECHNOLOGIES section:
    • Number of distinct abatement technologies 
    • Non-selective catalytic reduction (NSCR) was used as an abatement technology (select "Yes" or "No") 
    • "Other" abatement technologies were used  (select "Yes" or "No")
    • Description of "other" abatement technologies that were used, if applicable   
  •  In the OTHER PRODUCTION DATA section:
    • Number of months missing data procedures were used to measure adipic acid production (select 0 to 12 from the dropdown box)
    • Select the method used to produce adipic acid from the following options:
      • Only cyclohexane is oxidized to produce adipic acid
      • Materials other than cyclohexane are oxidized to produce adipic acid
    • Annual quantity of cyclohexane used to produce adipic acid (tons), if only cyclohexane is oxidized to produce adipic acid
    • Annual quantity of cyclohexanone and cyclohexanol mixture used to produce adipic acid (tons) if materials other than cyclohexane are oxidized to produce adipic acid
    • Annual percent emission reduction for all production units combined  (percent)  

When you have finished entering this information, click SAVE to return to the Subpart E Overview page.


Back to Top

See Also

Screen Errors
Using e-GGRT to Prepare Your Subpart E Report
Subpart E Estimation Methodology
Subpart E Unit Information for the Site-Specific Emission Factor and Production Data Method
Subpart E Unit Information for an Administrator-Approved Alternative Method
Subpart E Summary Information for the Site-Specific Emission Factor and Production Data Method
Subpart E Summary Information for an Administrator-Approved Alternative Method
Subpart Validation Report

This web site is maintained by a contractor to the U.S. Environmental Protection Agency (RY2021.R.02)