Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| VALANG_ID | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| CEMSML-1 | Z | Data Completeness | Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). |
| CEMSML-2 | Z | Data Completeness | CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. |
| CML-001 | Z | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-002 | Z | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-007 | Z | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-007X | Z | Screen Error | Total carbon dioxide (CO2) emissions measured by the CEMS (or applicable Part 75 methodology). This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-012 | Z | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. |
| CML-013 | Z | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-014 | Z | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-016 | Z | Screen Error | Carbon dioxide emissions in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-018 | Z | Screen Error | Carbon dioxide emissions in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-020 | Z | Screen Error | Carbon dioxide emissions in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-022 | Z | Screen Error | Carbon dioxide emissions in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-027a | Z | Data Completeness | Fraction of nitrous oxide emissions from CML. This data element is required. |
| CML-034 | Z | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-035 | Z | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-036 | Z | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-037 | Z | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-038 | Z | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-039 | Z | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-040 | Z | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-041 | Z | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-043 | Z | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. |
| CML-046 | Z | Data Completeness | CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. |
| CML-047a | Z | Data Completeness | Fraction of methane emissions from CML. This data element is required. |
| CML-051 | Z | Data Completeness | Total Non-biogenic carbon dioxide emissions. This data element is required. |
| CML-052 | Z | Data Completeness | Total Biogenic carbon dioxide emissions. This data element is required. |
| CML-053 | Z | Data Completeness | Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-054 | Z | Data Completeness | Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-055 | Z | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-056 | Z | Screen Error | Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-057 | Z | Data Completeness | Total number of source operating hours in the reporting year. This data element is required. |
| CML-058 | Z | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. |
| CML-059 | Z | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is less than the End Date. |
| CML-060 | Z | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-061 | Z | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-062 | Z | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-063 | Z | Data Completeness | Carbon dioxide emissions measured in Quarter 1. This data element is required. |
| CML-064 | Z | Screen Error | Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-065 | Z | Data Completeness | Carbon dioxide emissions measured in Quarter 2. This data element is required. |
| CML-066 | Z | Screen Error | Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-067 | Z | Data Completeness | Carbon dioxide emissions measured in Quarter 3. This data element is required. |
| CML-068 | Z | Screen Error | Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-069 | Z | Data Completeness | Carbon dioxide emissions measured in Quarter 4. This data element is required. |
| CML-070 | Z | Screen Error | Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-071 | Z | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-072 | Z | Data Completeness | Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-073 | Z | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-074 | Z | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-075 | Z | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-076 | Z | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-077 | Z | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-078 | Z | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-082 | Z | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-083 | Z | Screen Error | Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. |
| CML-086 | Z | Screen Error | The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-087 | Z | Screen Error | The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-088 | Z | Screen Error | The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| CML-089 | Z | Screen Error | The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| IVT-Z001 | Z | Data Completeness | You have not yet added any equation inputs data for this origin of rock. Please use the Inputs Verifier Tool to enter equation inputs for each origin of rock and calculate a result for this wet-process phosphoric acid process line. |
| IVT-Z002 | Z | Screen Error | Inorganic carbon content of a grab sample batch of phosphate rock by origin obtained during {1}, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing.. |
| IVT-Z004 | Z | Screen Error | Mass of phosphate rock by origin consumed in {1} by wet-process phosphoric acid process line. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Z005 | Z | Screen Error | Mass of phosphate rock by origin consumed in {1} by wet-process phosphoric acid process line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Z006 | Z | Screen Error | Carbon dioxide content of a grab sample batch of phosphate rock by origin obtained during {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Z007 | Z | Screen Error | Mass of phosphate rock by origin consumed in {1} by wet-process phosphoric acid process line. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Z008 | Z | Screen Error | Carbon dioxide content of a grab sample batch of phosphate rock by origin obtained during {1}. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing.. |
| IVT-Z011 | Z | Screen Error | Inorganic carbon content of a grab sample batch of phosphate rock by origin obtained during {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Z012 | Z | Screen Error | Carbon dioxide content of a grab sample batch of phosphate rock by origin obtained during {1}. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing.. |
| Z001 | Z | Data Completeness | Facility total annual phosphoric acid permitted production capacity. This data element is required. |
| Z003 | Z | Screen Error | Facility total annual phosphoric acid permitted production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z0031 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[]. This data element is required for each month of the Reporting Year. |
| Z004 | Z | Data Completeness | Facility total annual phosphoric acid production capacity. This data element is required. |
| Z0043 | Z | Data Completeness | Is the mass consumed value a substitute data value?[]. This data element is required for each month of the Reporting Year. |
| Z005 | Z | Screen Error | Facility total annual phosphoric acid production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z0055 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z0067 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[]. This data element is required for each month of the Reporting Year. |
| Z007 | Z | Data Completeness | You have added Subpart Z, but have not yet added a line. |
| Z0079 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z008 | Z | Screen Error | Is this unit\'s emissions monitored using a CEMS? This data element is required. Please enter the required data or click CANCEL. |
| Z009 | Z | Data Completeness | Annual phosphoric acid production capacity. This data element is required. |
| Z010 | Z | Screen Error | Annual phosphoric acid production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z012 | Z | Screen Error | Calculation Method. This data element is required. Please enter the required data or click CANCEL. |
| Z013 | Z | Data Completeness | You have added a wet-process phosphoric acid line, but have not yet added an origin. |
| Z014 | Z | Screen Error | Origin of Phosphate Rock. This data element is required. Please enter the required data or click CANCEL. |
| Z015 | Z | Data Completeness | Origin of Phosphate Rock, Other. This data element is required when Origin of Phosphate is specified as "Other". |
| Z016 | Z | Data Completeness | Annual amount of phosphoric acid produced. This data element is required. |
| Z017 | Z | Screen Error | Annual amount of phosphoric acid produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z019 | Z | Data Completeness | Annual arithmetic average percent inorganic carbon, or the annual arithmetic average percent carbon dioxide (derived from monthly sampling records) (percent by weight, expressed as a decimal fraction). This data element is required. |
| Z020 | Z | Screen Error | Annual arithmetic average percent inorganic carbon, or the annual arithmetic average percent carbon dioxide (derived from monthly sampling records) (percent by weight, expressed as a decimal fraction). You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| Z022 | Z | Data Completeness | Annual amount of rock consumed. This data element is required. |
| Z023 | Z | Screen Error | Annual amount of rock consumed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z025 | Z | Data Completeness | Annual CO2 mass emissions for the wet-process phosphoric acid process line (Equation Z-1a). This data element is required. |
| Z026 | Z | Screen Error | Annual CO2 mass emissions for the wet-process phosphoric acid process line (Equation Z-1a). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z028 | Z | Data Completeness | Annual CO2 mass emissions for the wet-process phosphoric acid process line (Equation Z-1b). This data element is required. |
| Z029 | Z | Screen Error | Annual CO2 mass emissions for the wet-process phosphoric acid process line (Equation Z-1b). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z031 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[January]. This data element is required for each month of the Reporting Year. |
| Z032 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[February]. This data element is required for each month of the Reporting Year. |
| Z033 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[March]. This data element is required for each month of the Reporting Year. |
| Z034 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[April]. This data element is required for each month of the Reporting Year. |
| Z035 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[May]. This data element is required for each month of the Reporting Year. |
| Z036 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[June]. This data element is required for each month of the Reporting Year. |
| Z037 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[July]. This data element is required for each month of the Reporting Year. |
| Z038 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[August]. This data element is required for each month of the Reporting Year. |
| Z039 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[September]. This data element is required for each month of the Reporting Year. |
| Z040 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[October]. This data element is required for each month of the Reporting Year. |
| Z041 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[November]. This data element is required for each month of the Reporting Year. |
| Z042 | Z | Data Completeness | Is the inorganic carbon content value a substitute value?[December]. This data element is required for each month of the Reporting Year. |
| Z043 | Z | Data Completeness | Is the mass consumed value a substitute data value?[January]. This data element is required for each month of the Reporting Year. |
| Z044 | Z | Data Completeness | Is the mass consumed value a substitute data value?[February]. This data element is required for each month of the Reporting Year. |
| Z045 | Z | Data Completeness | Is the mass consumed value a substitute data value?[March]. This data element is required for each month of the Reporting Year. |
| Z046 | Z | Data Completeness | Is the mass consumed value a substitute data value?[April]. This data element is required for each month of the Reporting Year. |
| Z047 | Z | Data Completeness | Is the mass consumed value a substitute data value?[May]. This data element is required for each month of the Reporting Year. |
| Z048 | Z | Data Completeness | Is the mass consumed value a substitute data value?[June]. This data element is required for each month of the Reporting Year. |
| Z049 | Z | Data Completeness | Is the mass consumed value a substitute data value?[July]. This data element is required for each month of the Reporting Year. |
| Z050 | Z | Data Completeness | Is the mass consumed value a substitute data value?[August]. This data element is required for each month of the Reporting Year. |
| Z051 | Z | Data Completeness | Is the mass consumed value a substitute data value?[September]. This data element is required for each month of the Reporting Year. |
| Z052 | Z | Data Completeness | Is the mass consumed value a substitute data value?[October]. This data element is required for each month of the Reporting Year. |
| Z053 | Z | Data Completeness | Is the mass consumed value a substitute data value?[November]. This data element is required for each month of the Reporting Year. |
| Z054 | Z | Data Completeness | Is the mass consumed value a substitute data value?[December]. This data element is required for each month of the Reporting Year. |
| Z055 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[January]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z056 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[February]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z057 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[March]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z058 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[April]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z059 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[May]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z060 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[June]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z061 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[July]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z062 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[August]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z063 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[September]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z064 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[October]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z065 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[November]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z066 | Z | Data Completeness | Method used to estimate any missing values of inorganic carbon content[December]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z067 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[January]. This data element is required for each month of the Reporting Year. |
| Z068 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[February]. This data element is required for each month of the Reporting Year. |
| Z069 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[March]. This data element is required for each month of the Reporting Year. |
| Z070 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[April]. This data element is required for each month of the Reporting Year. |
| Z071 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[May]. This data element is required for each month of the Reporting Year. |
| Z072 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[June]. This data element is required for each month of the Reporting Year. |
| Z073 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[July]. This data element is required for each month of the Reporting Year. |
| Z074 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[August]. This data element is required for each month of the Reporting Year. |
| Z075 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[September]. This data element is required for each month of the Reporting Year. |
| Z076 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[October]. This data element is required for each month of the Reporting Year. |
| Z077 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[November]. This data element is required for each month of the Reporting Year. |
| Z078 | Z | Data Completeness | Is the carbon dioxide content of a grab sample batch a substitute data value?[December]. This data element is required for each month of the Reporting Year. |
| Z079 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[January]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z080 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[February]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z081 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[March]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z082 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[April]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z083 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[May]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z084 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[June]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z085 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[July]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z086 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[August]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z087 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[September]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z088 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[October]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z089 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[November]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z090 | Z | Data Completeness | Method used to determine each carbon dioxide content of a grab sample batch substitute data value[December]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". |
| Z091 | Z | Screen Error | Enter Own result for Annual CO2 mass emissions resulting for the wet process from Phosphoric acid process line. This data element is required if you select Enter/Report Alternate Result |
| Z092 | Z | Screen Error | Enter Own result for Annual CO2 mass emissions resulting for the wet process from Phosphoric acid process line. This data element is required if you select Enter/Report Alternate Result |
| Z093 | Z | Data Completeness | Facility total annual phosphoric acid permitted production capacity. This data element is required. |
| Z095 | Z | Screen Error | Facility total annual phosphoric acid permitted production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z096 | Z | Data Completeness | Facility total annual phosphoric acid production capacity. This data element is required. |
| Z097 | Z | Screen Error | Facility total annual phosphoric acid production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z099 | Z | Data Completeness | You have added Subpart Z, but have not yet added a wet-process phosphoric acid line. |
| Z100 | Z | Data Completeness | You have added a wet-process phosphoric acid line, but have not yet added an origin of rock. |
| Z101 | Z | Screen Error | Origin of Phosphate Rock. This data element is required. Please enter the required data or click CANCEL. |
| Z102 | Z | Screen Error | Origin of Phosphate Rock, Other. This data element is required when Origin of Phosphate is specified as "Other". |
| Z103 | Z | Data Completeness | Annual amount of phosphoric acid produced. This data element is required. |
| Z104 | Z | Screen Error | Annual amount of phosphoric acid produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z106 | Z | Data Completeness | Annual arithmetic average percent inorganic carbon, or the annual arithmetic average percent carbon dioxide (derived from monthly sampling records) (percent by weight, expressed as a decimal fraction). This data element is required. |
| Z107 | Z | Screen Error | Annual arithmetic average percent inorganic carbon, or the annual arithmetic average percent carbon dioxide (derived from monthly sampling records) (percent by weight, expressed as a decimal fraction). You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| Z109 | Z | Data Completeness | Annual amount of rock consumed. This data element is required. |
| Z110 | Z | Screen Error | Annual amount of rock consumed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Z112 | Z | Screen Error | Origin of Phosphate Rock, Other. The value you have entered for this data element already exists for this unit. You must correct the current value before continuing. |
Overview
Content Tools
ThemeBuilder
Tasks