XML Upload Critical Errors

Certain validation checks which are considered to represent critical errors must be corrected before you can successfully upload your XML-based submission. These checks are reported to the XML reporter immediately upon attempted upload and signified with a stop sign in your validation report.   The table below (or via download) provides a list of critical errors along with additional information that will help you diagnose and correct your XML package.  If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, please submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.


SubpartError CodeValidation Message Provided by e-GGRTXpathData Element NameAdditional Instructions for Resolving
AA001Do reported emissions include emissions from a cogeneration unit. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ CogenerationUnitEmissionsIndicatorcogenUnitEmissionsBe sure to include the required <CogenerationUnitEmissionsIndicator>value (allowed values are only Y, N, NA) 
AA002NAICS code. This data element is required. naicsCode 
AA003NAICS code. This data element must have 6 digits. naicsCode 
AA005Parent company name. This data element is required. corporateFacilityName 
AA006Percentage of ownership interest. This data element is required. ownerPercentage 
AA007Street address. This data element is required. streetAddressLine1 
AA008City. This data element is required. city 
AA009State. This data element is required. state 
AA010ZIP code. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetail /ParentCompanyDetails/ParentCompany/ZipzipBe sure to include the missing zip code for the <Zip> element
AA011Percentage of ownership interest. The value entered must be between 0 and 100. ownerPercentage 
AA012ZIP code. The zip code must be in the format xxxxx, xxxxx-xxxx, or xxxxxxxxx. zip 
AA013The selected GHG report start date is after the selected GHG report end date. ghgReportStartDate 
AA014Explanation of any calculation methodology changes during the reporting year must be 4,000 characters or less. calcMethodChangeDesc 
AA016Percentage of ownership interest. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. ownerPercentage 
AA017Street address. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. streetAddressLine1 
AA018City. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. city 
AA019State. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. state 
AA020ZIP code. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. zip 
AA023Code\'s relevance to revenue producing activity. This data element is required. type 
AA067Use of Subpart L BAMM (Best Available Monitoring Methods) was permitted ONLY in Reporting Year 2012. Please remove these data elements before submitting your report.FacilitySiteInformation/SubpartBAMMDetails/ SubpartNamesubpartNameWithin the <SubpartBAMMDetails> node do not include a set of data introduced by <SubpartName>L</SubpartName>
AA080Parent Company Name. This data element cannot have periods. corporateFacilityName 
AA081Parent Company Name. You must use "&" instead of "and". corporateFacilityName 
AA082Parent Company Name. You must use "NORTH AMERICA" instead of "NA". corporateFacilityName 
AA083Parent Company Name. You must use "CORP" instead of "Corporation". corporateFacilityName 
AA084Parent Company Name. You must use "ASSOC" instead of "Association". corporateFacilityName 
AA085Parent Company Name. You must use "CO" instead of "Company". corporateFacilityName 
AA086Parent Company Name. You must use "DIV" instead of "Division". corporateFacilityName 
AA087Parent Company Name. You must use "INC" instead of "Incorp". corporateFacilityName 
AA088Parent Company Name. You must use "INC" instead of "Incorporated". corporateFacilityName 
AA089Parent Company Name. You must use "LP" instead of "Limited Partnership". corporateFacilityName 
AA090Parent Company Name. You must use "LTD" instead of "Limited". corporateFacilityName 
AA091Parent Company Name. You must use "LLC" instead of "Limited Liability Company". corporateFacilityName 
AA092Parent Company Name. You must use "PTNR" instead of "Partnership". corporateFacilityName 
AA093Parent Company Name. You must use "USA" instead of "United States of America". corporateFacilityName 
AA094Parent Company Name. You must use "US" instead of "United States". corporateFacilityName 
AA095Please provide only one facility in your uploaded XML file. faccount 
AA096The FacilitySiteIdentifier node was empty. Please change your XML file, add a FacilitySiteIdentifier (Facility Id), and upload your file again. facid 
AA097The GHGRP ID %gid_str within the uploaded XML file does not match the GHGRP ID of the facility you currently have selected. facid 
AA098The Reporting Year %ry_str within the uploaded XML file does not match the Reporting Year of the facility you currently have selected. ryid 
AA100Subpart OO cannot contain any Carbon Dioxide emission values. subparts 
AA101The "CalculationMethodologyChangesDescription" element should be less than 4000 characters. calcDesc 
AA107The GHG reporting start date entered for your annual report is invalid (does not fall within the calendar year of your annual report). Please double check your report and revise, if necessary. If you believe it to be correct, please submit the report as is. transientData['startYear'] 
AA108The date entered for the end of the reporting period is invalid because it does not fall within the calendar year of your annual report. Please correct the date. transientData['endYear'] 
AA111Total supplier CO2e emissions greater than zero were reported but the report does not contain any of the supplier subparts LL through QQ. Please address this critical error. Then you can return here to perform another final review and submit your report. data[supplierAnnualCO2E] 
AA112Total facility biogenic CO2 emissions have not been reported but the report contains at least one subpart from Subpart C through II, SS, or TT. Based on the information available to us, it appears that this data element is required per 98.3(c)(4)(ii). Please address this critical error. Then you can return here to perform another final review and submit your report. data[facilityAnnualBiogenicCO2] 
AA113Total facility CO2e emissions greater than zero were reported, but the report contains no direct emitter subparts C-II, RR-UU (i.e., non-supplier subparts). Please address this critical error. Then you can return here to perform another final review and submit your report. data[facilityAnnualCO2E] 
AA114Total facility CO2e emissions have not been reported, but the report contains at least one subpart from Subpart C through II, SS, or TT. Based on the information available to us, it appears that this data element is required per 98.3(c)(4)(i). Please address this critical error. Then you can return here to perform another final review and submit your report. data[facilityAnnualCO2E] 
AA116The reported value for the CO2 equivalent emissions from facility subparts C-II, SS, and TT ({1} metric tons) is larger than expected. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[facilityAnnualCO2E] 
AA117The reported value for the biogenic CO2 emissions from facility subparts C-II, SS, and TT ({1} metric tons) is larger than expected. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[facilityAnnualBiogenicCO2] 
AA118The reported value for the CO2 equivalent emissions from supplier subparts LL-QQ ({1} metric tons) is either larger than expected or smaller than expected. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[supplierAnnualCO2E] 
AA120You have attached a file named ({1}) for subparts ({2}). All files attached for submission should have unique names. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[filesWithSameName] 
AA121You have attached a file named ({1}) for subpart ({2}). All files attached for submission should have unique names. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[duplicateFileName] 
AA500NAICS code: Please enter a primary NAICS code for the facility. This data element is required.GHG/FacilitySiteInformation/ FacilitySiteDetails/ PrimaryNAICSCodenaicsCodeBe sure to include <PrimaryNAICSCode> value
AA501aNAICS code was not found in the list of 2017 NAICS codes. naicsCode 
AA501bNAICS code was not found in the list of 2022 NAICS codes. naicsCode 
AA502The NAICS code entered has already been selected for this facility. naicsCode 
AA503You have already entered a code for the primary NAICS code. Only one code can be designated as the "Primary" NAICS code. Please select either "Second Primary" NAICS code or "Additional" NAICS code. naicsCode 
AA504You have already entered a code for the second primary NAICS code. Only one code can be designated as the "Second Primary" NAICS code. Please select either "Primary" NAICS code or "Additional" NAICS code. naicsCode 
AA505Please select a primary NAICS code before selecting a second primary NAICS code. naicsCode 
AA506Please select a primary NAICS code before selecting an additional NAICS code. naicsCode 
AA510Parent Company Name(s). Please enter the name(s) of the highest-level United States parent company/companies or other entity (e.g., partnership, city government) that owned this facility or supplier on December 31 of the current reporting year. If the facility or supplier is federally owned, enter "US GOVERNMENT."/GHG/FacilitySiteInformation/ FacilitySiteDetails/ParentCompanyDetailsnoneBe sure to include the omitted <ParentCompanyDetails> element  value 
AA511You have not yet selected any subparts for reporting. Return to the Facility or Supplier Overview page and use the ADD or REMOVE Subparts link to select the applicable subpart(s) for your facility or supplier.GHG/FacilitySiteInformation/ FacilitySiteDetails/ SubPartInformationnoneYou must the include the node associated with listed Xpath and at least one subpart node withing this parent
AA511aYou have not selected any subparts for reporting. none 
AALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
AALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
AAAA001Annual steam purchases. This data element is required. You may enter zero if your mill does not purchase steam. annualSteamPurchases 
AAAA002Annual steam purchases. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualSteamPurchases 
AAAA004Annual production of unbleached virgin chemical pulp. This data element is required. You may enter zero only if no virgin chemical pulp was produced and you are reporting zero emissions under subpart AA. annualPulpProd 
AAAA005Annual production of pulp products. You must enter a value for the annual production of pulp products that is greater than or equal to zero. You may enter zero only if no virgin chemical pulp was produced and you are reporting zero emissions under subpart AA. annualPulpProd 
AAAA010Please make a selection or click CANCEL. hasCEMS 
AAAA020Basis for annual mass of spent liquor solids. This data element is required. basis 
AAAA030Basis for annual mass of spent liquor solids. This data element is required. basis 
AAAA034You have selected Subpart AA for reporting, but you have not yet added a unit or furnace. groupUnit 
AAAA035You have selected Subpart AA for reporting, but you have not yet added makeup chemical use. You may enter zero for makeup chemical use if your mill does not use calcium carbonate or sodium carbonate as makeup chemicals. unitTypeName 
AAAA036You have not added a fuel for this Chemical Recovery Furnace. fuelAssociationId 
AAAA037You have not added a fuel for this Chemical Recovery Combustion Unit. fuelAssociationId 
AAAA038You have not added a fuel for this Pulp Mill Lime Kiln. fuelAssociationId 
AAAA040Please select a calculation methodology (i.e., tier) or click CANCEL. calculationMethodology 
AAAA041You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate 
AAAA042Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate 
AAAA043Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate 
AAAA044Please select a fuel or click CANCEL. fuelName 
AAAA060Frequency of higher heating value determinations. This data element is required. frequencyHHVDeterminations 
AAAA061Frequency of higher heating value determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of higher heating value determinations in the text box provided. This data element is required. otherFrequencyHHVDeterminations 
AAAA062Total number of valid carbon content determinations. This data element is required. numberOfCCs 
AAAA063Total number of valid carbon content determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfCCs 
AAAA065Total number of carbon content substitute data values. This data element is required. numberOfSubstituteCCs 
AAAA066Total number of carbon content substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteCCs 
AAAA068Frequency of carbon content determinations. This data element is required. frequencyCCDeterminations 
AAAA069Frequency of carbon content determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of carbon content determinations in the text box provided. This data element is required. otherFrequencyCCDeterminations 
AAAA070Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This data element is required. operatingHoursMissingFuelUsage 
AAAA071Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. operatingHoursMissingFuelUsage 
AAAA073Total number of valid carbon content determinations. This data element is required. numberOfCCs 
AAAA074Total number of valid carbon content determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfCCs 
AAAA076Total number of carbon content substitute data values. This data element is required. numberOfSubstituteCCs 
AAAA077Total number of carbon content substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteCCs 
AAAA079Frequency of carbon content determinations. This data element is required. frequencyCCDeterminations 
AAAA080Frequency of carbon content determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of carbon content determinations in the text box provided. This data element is required. otherFrequencyCCDeterminations 
AAAA081Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This data element is required. operatingHoursMissingFuelUsage 
AAAA082Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. operatingHoursMissingFuelUsage 
AAAA084Total number of valid molecular weight determinations. This data element is required. numberOfValidMWDeterminations 
AAAA085Total number of valid molecular weight determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfValidMWDeterminations 
AAAA087Total number of molecular weight substitute data values. This data element is required. numberOfSubstituteMWs 
AAAA088Total number of molecular weight substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteMWs 
AAAA090Frequency of molecular weight determinations. This data element is required. frequencyMWDeterminations 
AAAA091Frequency of molecular weight determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of molecular weight determinations in the text box provided. This data element is required. otherFrequencyMWDeterminations 
AAAA161Fuel name. You must enter a fuel name to proceed further. fuelName 
AAAA162Fuel type. You must make a selection for a fuel type to proceed further. fuelType 
AAAA163Molar Volume Constant (MVC) used. This data element is required. mvc 
AAAA500Emissions associated with spent pulping liquor combustion were reported but the annual quantity of pulp products reported was zero. It appears that a positive quantity of annual pulp products should have been reported. Please address this critical error. Then you can return here to perform another final review and submit your report. data[annualPulpProductsProduced] 
AAAA501The annual quantity of calcium oxide produced in the lime kiln [{1}] was reported as zero but emissions were reported for the kiln indicating that it produced calcium oxide during the reporting year. Please address this critical error. Then you can return here to perform another final review and submit your report. data[caOQuantityProduced] 
AAAA519The annual N2O emissions of {1} (metric tons) Subpart AA does not equal the sum of the annual N2O emissions of {2} (metric tons) from all units at the facility. Please address this critical error. Then you can return here to perform another final review and submit your report. data[subpartAAAnnualN2O] 
AACEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
AACEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
AACEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
AAIVT-C854You have reported all zeros or a combination of non-zero and zero values for equation inputs for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted or enter non-zero values for all equation inputs. You must correct this before continuing or click Cancel. monthApplicable 
AAIVT-C855You have reported a zero for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted. You must correct this before continuing or click Cancel. monthApplicable 
AAUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
AAUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
BBBB008You have not uploaded a reporting form file. jctSubPartFacility 
BBBB009Annual production of silicon carbide. This data element is required. annualProductionofSiliconCarbide 
BBBB010Annual production of silicon carbide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. annualProductionofSiliconCarbide 
BBBB013Annual production capacity of silicon carbide. This data element is required. annualProductionCapacityofSiliconCarbide 
BBBB014Annual production capacity of silicon carbide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. annualProductionCapacityofSiliconCarbide 
BBBB017Annual consumption of petroleum coke. This data element is required. annualConsumptionofPetroleumCoke 
BBBB018Annual consumption of petroleum coke. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. annualConsumptionofPetroleumCoke 
BBBB019Indicator of whether the carbon content of petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method. This data element is required. basisforCarbonContentofPetCoke 
BBBB020Measured carbon content of petroleum coke as determined for QA/QC of supplier data. This data is required. measuredQAQCCarbonContentofPetCoke 
BBBB021Measured carbon content of petroleum coke as determined for QA/QC of supplier data. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing or click CANCEL. measuredQAQCCarbonContentofPetCoke 
BBBB023Number of months that missing data procedures were followed to determine the carbon content of petroleum coke. This data element is required. numberofMonthsofCarbonContent 
BBBB024Number of months that missing data procedures were followed to determine the carbon content of petroleum coke. You must enter a value that is greater than or equal to zero and less than or equal to 12. You must correct the current value before continuing or click CANCEL. numberofMonthsofCarbonContent 
BBBB025Number of months that missing data procedures were followed to determine the monthly petroleum coke consumption. This data element is required. numberofMonthsofPetCokeConsumption 
BBBB026Number of months that missing data procedures were followed to determine the monthly petroleum coke consumption. You must enter a value that is greater than or equal to zero and less than or equal to 12. You must correct the current value before continuing or click CANCEL. numberofMonthsofPetCokeConsumption 
BBBB027Annual nitrous oxide mass emissions. This data element is required. officialUnroundedN2o 
BBBB028Annual nitrous oxide mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. officialUnroundedN2o 
BBBB029Annual methane mass emissions. This data element is required. officialUnroundedCh4 
BBBB030Annual methane mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. officialUnroundedCh4 
BBBB100You have not selected the Subpart BB calculation methodology for your facility. isCems 
BBCEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
BBCEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
BBCEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
BBCML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
BBCML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
BBCML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
BBCML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
BBCML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
BBCML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
BBCML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
BBCML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
BBCML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
BBCML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
BBCML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
BBCML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
BBCML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
BBCML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
BBCML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
BBCML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
BBCML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
BBCML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
BBCML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
BBCML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
BBCML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
BBCML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
BBCML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
BBCML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
BBCML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
BBCML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
BBCML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
BBCML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
BBCML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
BBCML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
BBCML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
BBCML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
BBCML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
BBCML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
BBCML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
BBCML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
BBCML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
BBCML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
CALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
CALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
CC-EF-1You have not yet added a fuel for this configuration./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/ TierFuelDetails/FuelType>nofuelsEach unit must include at least one <FuelType>
CC-EU-1You have selected Subpart C for reporting, but you have not yet added a configuration./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/UnitIdentification/UnitNamenounitsSubpart C must include at least one <UnitsCDetails> node with a <UnitName>
CC002The maximum rated heat input capacity of an individual unit, or the highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. This data element is required. ratedHeatInputCapacity 
CC003The maximum rated heat input capacity of an individual unit, or the highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedHeatInputCapacity 
CC0066Carbon dioxide emissions measured by the CEMS (or applicable Part 75 methodology). This data element can not be smaller than the biogenic carbon dioxide mass emissions. officialUnroundedCEMSorPart75Co2 
CC0076Carbon dioxide emissions measured by the CEMS (or applicable Part 75 methodology). This data element can not be smaller than the biogenic carbon dioxide mass emissions. officialUnroundedCEMSorPart75Co2 
CC0083Total annual carbon dioxide mass emissions at the monitored location. This data element can not be smaller than the biogenic carbon dioxide mass emissions. officialUnroundedCEMSorPart75Co2 
CC009The combined maximum rated heat input capacity of the units sharing the common stack. This data element is required. ratedHeatInputCapacity 
CC010The combined maximum rated heat input capacity of the units sharing the common stack. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedHeatInputCapacity 
CC011Number of units sharing common stack or duct. This data element is required. numberOfUnits 
CC012Number of units sharing common stack or duct. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfUnits 
CC013-1You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate 
CC013-2You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate 
CC014-1Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate 
CC014-2Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate 
CC015-1Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate 
CC015-2Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate 
CC016Part 75 methodology. This data element is required. part75Methodology 
CC017Part 75 heat input method. This data element is required. part75HeatInputMethod 
CC018You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate 
CC019Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate 
CC020Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate 
CC021The maximum rated heat input capacity of an individual unit, or the highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. This data element is required. ratedHeatInputCapacity 
CC022The maximum rated heat input capacity of an individual unit, or the highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedHeatInputCapacity 
CC023Group name/ID. This data element is required. groupUnitName 
CC024This type of reporting configuration (common duct/stack) must have a group name/ID that begins with the prefix "CS-". groupUnitName 
CC025Unit name/ID. This data element is required. groupUnitName 
CC026Unit type. This data element is required. groupUnitType 
CC027Group name/ID. This data element is required. groupUnitName 
CC028This type of reporting configuration (aggregation of small units) must have a group name/ID that begins with the prefix "GP-". groupUnitName 
CC029This type of reporting configuration (common supply pipe) must have a name/ID that begins with the prefix "CP-". groupUnitName 
CC030Total number of source operating hours in the reporting year. This data element is required. sourceOpHours 
CC031Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. sourceOpHours 
CC033The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide concentration. This data element is required. operatingHoursCo2Concentration 
CC034The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursCo2Concentration 
CC036The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. operatingHoursGasFlowRate 
CC037The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursGasFlowRate 
CC039The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content (if moisture correction is required and a continuous moisture monitor is used). This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursMoisture 
CC041Cumulative carbon dioxide emissions, Quarter 1. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/Tier4QuarterFuelDetails[1]/ CumulativeCO2MassEmissionsemissionsMap['Quarter 1']Within the <Tier4QuarterFuelDetails> node with a property of  <QuarterName>First Quarter</QuarterName>must be included with a <CumulativeCO2MassEmissions> node with a non-null<CalculatedValue>
CC042Cumulative carbon dioxide emissions, Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emissionsMap['Quarter 1'] 
CC043Cumulative carbon dioxide emissions, Quarter 2. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/Tier4QuarterFuelDetails[3]/ CumulativeCO2MassEmissions/CalculatedValueemissionsMap['Quarter 2']Within the <Tier4QuarterFuelDetails> node with a property of  <QuarterName>Second Quarter</QuarterName> must be included with a <CumulativeCO2MassEmissions> node with a non-null<CalculatedValue>
CC044Cumulative carbon dioxide emissions, Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emissionsMap['Quarter 2'] 
CC045Cumulative carbon dioxide emissions, Quarter 3. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/Tier4QuarterFuelDetails[3]/ CumulativeCO2MassEmissions/CalculatedValueemissionsMap['Quarter 3']Within the <Tier4QuarterFuelDetails> node with a property of  <QuarterName>Third Quarter</QuarterName> must be included with a <CumulativeCO2MassEmissions> node with a non-null<CalculatedValue>
CC046Cumulative carbon dioxide emissions, Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emissionsMap['Quarter 3'] 
CC047Cumulative carbon dioxide emissions, Quarter 4. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/Tier4QuarterFuelDetails[4]/ CumulativeCO2MassEmissions/CalculatedValueemissionsMap['Quarter 4']Within the <Tier4QuarterFuelDetails> node with a property of  <QuarterName>Fourth Quarter</QuarterName> must be included with a <CumulativeCO2MassEmissions> node with a non-null<CalculatedValue>
CC048Cumulative carbon dioxide emissions, Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emissionsMap['Quarter 4'] 
CC049Annual volume of carbon dioxide emitted from the combustion of all fuels, Vtotal. Because you have indicated that biogenic carbon dioxide emissions were estimated using the methodology described by Equations C-12, C-13, and C-14, this data element is required. vtotal 
CC050Annual volume of carbon dioxide emitted from the combustion of all fuels, Vtotal. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. vtotal 
CC051Annual volume of carbon dioxide emitted from the combustion of all fossil fuels, Vff. Because you have indicated that biogenic carbon dioxide emissions were estimated using the methodology described by Equations C-12, C-13, and C-14, this data element is required. vff 
CC052Annual volume of carbon dioxide emitted from the combustion of all fossil fuels, Vff. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. vff 
CC053Annual volume of carbon dioxide emitted from the combustion of all biomass fuels, Vbio. Because you have indicated that biogenic carbon dioxide emissions were estimated using the methodology described by Equations C-12, C-13, and C-14, this data element is required. vbio 
CC054Annual volume of carbon dioxide emitted from the combustion of all biomass fuels, Vbio. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. vbio 
CC057Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table.GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation /SubPartC/UnitsCDetails/Tier4Details/CO2EmissionsNonBiogenicofficialUnroundedBiogenicCo2Within the <Tier4Details> node the <CumulativeCO2MassEmissions> node must be included with a non-null<CalculatedValue>
CC058Biogenic carbon dioxide mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedBiogenicCo2 
CC060Total annual non-biogenic CO2 emissions (includes fossil fuel, sorbent, and process carbon dioxide emissions). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/CO2EmissionsNonBiogenicofficialUnroundedNonBiogenicCo2Must enter value of CO2EmissionsNonBiogenic
CC061Non-biogenic carbon dioxide emissions (includes fossil fuel, sorbent, and process carbon dioxide emissions). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedNonBiogenicCo2 
CC063Total mass CO2 mass emissions measured by the CEMS (include both biogenic and non-biogenic emissions, and, if applicable, emissions for a slipstream that bypassed the CEMS). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/AnnualCO2EmissionsMeasuredByCEMSofficialUnroundedCEMSorPart75Co2Must enter value of Annual CO2EmissionsMeasuredByCEMS
CC064Carbon dioxide emissions measured by the CEMS (or applicable Part 75 methodology). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCEMSorPart75Co2 
CC067Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table./GHG/FacilitySiteInformation/FacilitySiteDetails /SubPartInformation/SubPartC/UnitsCDetails/ Tier4Details/CO2EmissionsBiogenic/CalculatedValueofficialUnroundedBiogenicCo2Within Common Stack or Duct (CEMS), must enter the value of Total annual non-biogenic CO2 mass emissions
CC068Biogenic carbon dioxide mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedBiogenicCo2 
CC070Total annual non-biogenic CO2 emissions (includes fossil fuel, sorbent, and process carbon dioxide emissions). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table.GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/ Tier4Details/CO2EmissionsBiogenic/CalculatedValueofficialUnroundedNonBiogenicCo2Within Common Stack or Duct (CEMS), must enter the value of Total annual biogenic CO2 mass emissions
CC071Non-biogenic carbon dioxide emissions (includes fossil fuel, sorbent, and process carbon dioxide emissions). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedNonBiogenicCo2 
CC073Total mass CO2 mass emissions measured by the CEMS (include both biogenic and non-biogenic emissions, and, if applicable, emissions for a slipstream that bypassed the CEMS). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/ Tier4Details/AnnualCO2EmissionsMeasuredByCEMSofficialUnroundedCEMSorPart75Co2Within the < Tier4Details >  node for the applicable unit the  < AnnualCO2EmissionsMeasuredByCEMS > node must be included with a non-null<CalculatedValue>
CC074Carbon dioxide emissions measured by the CEMS (or applicable Part 75 methodology). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCEMSorPart75Co2 
CC077Total biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails /CO2EmissionsAllBiomassFuelsCombinedofficialUnroundedAllBiomassFuelsCombinedCo2Within the </UnitsCDetails >  node for the applicable unit the  <CO2EmissionsAllBiomassFuelsCombined > node must be included with a non-null<CalculatedValue>
CC078Carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil and biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 
CC080Total annual CO2 mass emissions at the monitored location (include both biogenic and non-biogenic emissions). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table.GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/Part75Details/AnnualCO2EmissionsMeasuredByPart75MethodofficialUnroundedCEMSorPart75Co2Within the <Part75Details> node the <AnnualCO2EmissionsMeasuredByPart75Method> node must be included with a non-null<CalculatedValue>
CC081Total annual carbon dioxide mass emissions at the monitored location. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCEMSorPart75Co2 
CC084Total number of source operating hours in the reporting year that fuel flow rate was missing. This data element is required. operatingHoursFuelFlowRateMissing 
CC085Total number of source operating hours in the reporting year that fuel flow rate was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursFuelFlowRateMissing 
CC086Total number of source operating hours in the reporting year that higher heating value was missing. This data element is required. operatingHoursHHVMissing 
CC087Total number of source operating hours in the reporting year that higher heating value was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursHHVMissing 
CC094Total number of source operating hours in the reporting year that carbon dioxide concentration was missing. This data element is required. operatingHoursCo2Missing 
CC095Total number of source operating hours in the reporting year that carbon dioxide concentration was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursCo2Missing 
CC096Total number of source operating hours in the reporting year that stack gas flow rate was missing. This data element is required. operatingHoursStackGasFlowMissing 
CC097Total number of source operating hours in the reporting year that stack gas flow rate was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursStackGasFlowMissing 
CC100bAnnual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 
CC100cAnnual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 
CC101bAnnual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
CC103bAnnual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o 
CC103cAnnual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o 
CC104bAnnual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o 
CC106bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 
CC107bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 
CC109bCO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 
CC110bCO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o 
CC112bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 
CC112cAnnual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 
CC113bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 
CC115bCO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o 
CC115cAnnual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o 
CC116bCO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o 
CC118Please select a fuel or click CANCEL. fuelName 
CC119Please provide a fuel name or click CANCEL. fuelName 
CC120Fuel type. This is a required field. Please make a selection or click CANCEL. fuelType 
CC121Please select a calculation methodology (i.e., tier) or click CANCEL. calculationMethodology 
CC122You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate 
CC123Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate 
CC124Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate 
CC125Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table.GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation /SubPartC/ UnitsCDetails/CO2EmissionsAllBiomassFuelsCombinedofficialUnroundedAllBiomassFuelsCombinedCo2Single Units must include the <CO2EmissionsAllBiomassFuelsCombined> node and include a non-null <CalculatedValue> inside that node.
CC126Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 
CC128Annual carbon dioxide emissions from sorbent. If no sorbent was used in the configuration, enter zero for this field. This data element is required. officialUnroundedSorbentBasedCo2 
CC129Annual carbon dioxide emissions from sorbent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedSorbentBasedCo2 
CC131Annual carbon dioxide emissions from sorbent. If no sorbent was used in this configuration, enter zero for this field. This data element is required. officialUnroundedSorbentBasedCo2 
CC132Annual carbon dioxide emissions from sorbent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedSorbentBasedCo2 
CC134Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table.GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation /SubPartC/ UnitsCDetails/CO2EmissionsAllBiomassFuelsCombinedofficialUnroundedAllBiomassFuelsCombinedCo2Aggregation of Units must include the <CO2EmissionsAllBiomassFuelsCombined> node and include a non-null <CalculatedValue> inside that node.
CC135Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 
CC137Annual carbon dioxide emissions from combustion of all fossil fuels combined (if any of the units burn fossil AND biomass). This data element is required. officialUnroundedAllFossilFuelsCombinedCo2 
CC138Annual carbon dioxide emissions from combustion of all fossil fuels combined (if any of the units burn fossil AND biomass). You must correct the current value before continuing. officialUnroundedAllFossilFuelsCombinedCo2 
CC140Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table.GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation /SubPartC/ UnitsCDetails/CO2EmissionsAllBiomassFuelsCombinedofficialUnroundedAllBiomassFuelsCombinedCo2Common pipe units must include the <CO2EmissionsAllBiomassFuelsCombined> node and include a non-null <CalculatedValue> inside that node.
CC141Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 
CC143Annual carbon dioxide emissions from combustion of all fossil fuels combined (if any of the units burn fossil AND biomass). This data element is required. officialUnroundedAllFossilFuelsCombinedCo2 
CC144Annual carbon dioxide emissions from combustion of all fossil fuels combined (if any of the units burn fossil AND biomass). You must correct the current value before continuing. officialUnroundedAllFossilFuelsCombinedCo2 
CC149bAnnual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 
CC149cAnnual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 
CC150bAnnual methane emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
CC152bAnnual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o 
CC152cAnnual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o 
CC153bAnnual nitrous oxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o 
CC155bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 
CC156bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 
CC158bCO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o 
CC159bCarbon dioxide equivalent value for the annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o 
CC164Frequency of higher heating value determinations. This data element is required. frequencyHHVDeterminations 
CC165Frequency of higher heating value determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of higher heating value determinations in the text box provided. This data element is required. otherFrequencyHHVDeterminations 
CC166Total number of valid carbon content determinations. This data element is required. numberOfCCs 
CC167Total number of valid carbon content determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfCCs 
CC169Total number of carbon content substitute data values. This data element is required. numberOfSubstituteCCs 
CC170Total number of carbon content substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteCCs 
CC172Frequency of carbon content determinations. This data element is required. frequencyCCDeterminations 
CC173Frequency of carbon content determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of carbon content determinations in the text box provided. This data element is required. otherFrequencyCCDeterminations 
CC174Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This data element is required. operatingHoursMissingFuelUsage 
CC175Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursMissingFuelUsage 
CC177Total number of valid carbon content determinations. This data element is required. numberOfCCs 
CC178Total number of valid carbon content determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfCCs 
CC180Total number of carbon content substitute data values. This data element is required. numberOfSubstituteCCs 
CC181Total number of carbon content substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteCCs 
CC183Frequency of carbon content determinations. This data element is required. frequencyCCDeterminations 
CC184Frequency of carbon content determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of carbon content determinations in the text box provided. This data element is required. otherFrequencyCCDeterminations 
CC185Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This data element is required. operatingHoursMissingFuelUsage 
CC186Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursMissingFuelUsage 
CC188Total number of valid molecular weight determinations. This data element is required. numberOfValidMWDeterminations 
CC189Total number of valid molecular weight determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfValidMWDeterminations 
CC191Total number of molecular weight substitute data values. This data element is required. numberOfSubstituteMWs 
CC192Total number of molecular weight substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteMWs 
CC194Frequency of molecular weight determinations. This data element is required. frequencyMWDeterminations 
CC195Frequency of molecular weight determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of molecular weight determinations in the text box provided. This data element is required. otherFrequencyMWDeterminations 
CC199Please make a selection or click CANCEL. configurationType 
CC200Unit Name. This data element is required. Please enter the required data or click CANCEL. groupUnitName 
CC201Unit type. This data element is required. Please enter the required data or click CANCEL. groupUnitType 
CC221Annual CO2 emissions from combustion of the specified fuel (include both biogenic and non-biogenic emissions). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/TierFuelDetails/Tier1FuelDetails/EmissionsDetailsNode/TotalCO2CombustionEmissionsofficialUnroundedCo2For RY10-RY12 for other fuels, within the <Tier1FuelDetails> for the applicable unit  in the < EmissionsDetailsNode > node the <TotalCO2CombustionEmissions>  must be included with a non-null <CalculatedValue>
CC222Annual carbon dioxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 
CC225bAnnual methane emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
CC228bAnnual nitrous oxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o 
CC231bCarbon dioxide equivalent value for the annual methane emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 
CC234bCarbon dioxide equivalent value for the annual nitrous oxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o 
CC236bAnnual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o 
CC236cAnnual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o 
CC237bAnnual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o 
CC239bAnnual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 
CC239cAnnual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 
CC240bAnnual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
CC245bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 
CC246bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 
CC248bCO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o 
CC249bCO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o 
CC251bAnnual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o 
CC251cAnnual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o 
CC252bN2O Emission. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o 
CC254bAnnual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 
CC254cAnnual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 
CC255bCH4 emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
CC260bCO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 
CC261bCO2 equivalent emissions from CH4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 
CC263bCO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o 
CC264bCO2 equivalent emissions from N2O. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o 
CC266Enter Own Result for Annual CH4 emissions from combustion of the specified fuel. This data element is required if you select Enter/Report Alternate Result. officialUnroundedCh4 
CC267Enter Own Result for Annual N2O emissions from combustion of the specified fuel. This data element is required if you select Enter/Report Alternate Result. officialUnroundedN2o 
CC272Other Name is a required field when "OCS (Other combustion source)" is selected as the Unit Type. otherName 
CC273Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. hasCEMS 
CC274Please specify the feedstock type for this unit or click CANCEL feedStockType 
CC275Molar Volume Constant (MVC) used. This data element is required. mvc 
CC276bAnnual heat input for the specified fuel combusted by this unit. This data element is required. If the specified fuel was not combusted in this unit during the reporting year, delete it from your report. annualHeatInput 
CC276cAnnual heat input for the specified fuel combusted by this unit (for Table C-2 components of the blend). This data element is required. If the specified fuel was not combusted in this unit during the reporting year, delete it from your report. annualHeatInput 
CC277bAnnual heat input for the specified fuel combusted by this unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualHeatInput 
CC281-1The Calculation Methodology End Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology End Date is within the current reporting year, and is after the Start Date. calculationMethodologyEndDate 
CC283-1The Calculation Methodology Start Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology Start Date is within the current reporting year, and is prior to the End Date. calculationMethodologyStartDate 
CC284-1The Calculation Methodology End Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology End Date is within the current reporting year, and is after the Start Date. calculationMethodologyEndDate 
CC285-1The Calculation Methodology Start Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology Start Date is within the current reporting year, and is prior to the End Date. calculationMethodologyStartDate 
CC286-1The Calculation Methodology End Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology End Date is within the current reporting year, and is after the Start Date. calculationMethodologyEndDate 
CC287-1Total amount of sorbent used during the reporting year. This data element is required. totalSorbentUsed 
CC287-2Total amount of sorbent used during the reporting year. This data element is required. totalSorbentUsed 
CC288-1Are CO2 emissions that are not monitored by a CEMS generated from sorbent injection? Please select "Yes" if you used Equation C-11 to calculate sorbent emissions, or, select "No" if you did not or if you are resubmitting a previous annual report for any other reason. You are not required to resubmit a Reporting Year 2010 or Reporting Year 2011 annual report for the sole purpose of replying "No" to this question. isSorbentUsedCEMS 
CC288-2Are CO2 emissions that are not monitored by a CEMS generated from sorbent injection? Please select "Yes" if you used Equation C-11 to calculate sorbent emissions, or, select "No" if you did not or if you are resubmitting a previous annual report for any other reason. You are not required to resubmit a Reporting Year 2010 or Reporting Year 2011 annual report for the sole purpose of replying "No" to this question. isSorbentUsedCEMS 
CC289-1Total amount of sorbent used during the reporting year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalSorbentUsed 
CC289-2Total amount of sorbent used during the reporting year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalSorbentUsed 
CC291-1Molecular weight of the sorbent. This data element is required. mwSorbent 
CC291-2Molecular weight of the sorbent. This data element is required. mwSorbent 
CC292-1Molecular weight of the sorbent. You must enter a value that is greater than zero. You must correct the current value before continuing. mwSorbent 
CC292-2Molecular weight of the sorbent. You must enter a value that is greater than zero. You must correct the current value before continuing. mwSorbent 
CC294-1The ratio ("R") used in Equation C-11. This data element is required. ratioR 
CC294-2The ratio ("R") used in Equation C-11. This data element is required. ratioR 
CC295-1The ratio ("R") used in Equation C-11. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratioR 
CC295-2The ratio ("R") used in Equation C-11. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratioR 
CC297-1Report which CO2 result? This data element is required. isUserOverriddenSorbentBasedCo2 
CC297-2Report which CO2 result? This data element is required. isUserOverriddenSorbentBasedCo2 
CC309Sample Analysis Results for first quarter. This data element is required. q1SampleAnalysisResult 
CC310Sample Analysis Results for first quarter. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. q1SampleAnalysisResult 
CC312Sample Analysis Results for second quarter. This data element is required. q2SampleAnalysisResult 
CC313Sample Analysis Results for second quarter. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. q2SampleAnalysisResult 
CC315Sample Analysis Results for third quarter. This data element is required. q3SampleAnalysisResult 
CC316Sample Analysis Results for third quarter. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. q3SampleAnalysisResult 
CC318Sample Analysis Results for fourth quarter. This data element is required. q4SampleAnalysisResult 
CC319Sample Analysis Results for fourth quarter. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. q4SampleAnalysisResult 
CC341Maximum rated heat input capacity of the unit. You must enter a value that is greater than or equal to zero and less than or equal to 250 (mmBtu/hr). You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/ IndividualUnitDetails or /CommonPipeDetail/ratedHeatInputCapacityMaxRatedheatInputCapacity or HighestMaxRatedheatInputCapacity  should be between 0 and 259.
CC350Annual CO2 emissions. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ GHGasInfoDetails>GHGasNametotalnonbiogenicco2emissionThe summary for Subpart C must include the <GHGasInfoDetails> node with a <GHGASName> of "Carbon Dioxide" and a <GHGasQuanitity> with a non-null <CalculatedValue>
CC351Annual CH4 emissions. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ GHGasInfoDetails>GHGasNametotalch4emissionThe summary for Subpart C must include the <GHGasInfoDetails> node with a <GHGASName> of "Methane" and a <GHGasQuanitity> with a non-null <CalculatedValue>
CC352Annual N2O emissions. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ GHGasInfoDetails>GHGasNametotaln20emissionThe summary for Subpart C must include the <GHGasInfoDetails> node with a <GHGASName> of "Nitrous Oxide" and a <GHGasQuanitity> with a non-null <CalculatedValue>
CC353Annual biogenic CO2 emissions. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ GHGasInfoDetails>GHGasNametotalbiogenicco2emissionThe summary for Subpart C must include the <GHGasInfoDetails> node with a <GHGASName> of "Biogenic Carbon Dioxide" and a <GHGasQuanitity> with a non-null <CalculatedValue>
CC359-1The combination of fuel type and tier methodology reported for unit [{1}] is invalid. You may not use the Tier 2 methodology with a fuel that is not included in Table C-1 of subpart C. You must select a different methodology for the [{2}] fuel type before continuing. calculationMethodology 
CC454Measured high heat value of the solid fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. Please enter the required data. highHeatValue 
CC455Measured high heat value of the solid fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. highHeatValue 
CC458Carbon content of the solid fuel, for month(s) [{1}]. Please enter the required data. carbonContent 
CC459Carbon content of the solid fuel, for month(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing. carbonContent 
CC461Mass of the solid fuel combusted during month(s) [{1}] from company records is required. Please enter the required data. fuelCombusted 
CC462Mass of the solid fuel combusted during month(s) [{1}], from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelCombusted 
CC464Measured high heat value of the liquid fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. Please enter the required data. highHeatValue 
CC465Measured high heat value of the liquid fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. highHeatValue 
CC468Carbon content of the liquid fuel, for month(s) [{1}]. Please enter the required data. carbonContent 
CC469Carbon content of the liquid fuel, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContent 
CC472Volume of the liquid fuel combusted during month(s) [{1}] from company records is required. Please enter the required data. fuelCombusted 
CC473Volume of the liquid fuel combusted during month(s) [{1}], from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelCombusted 
CC475Measured high heat value of the gaseous fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. Please enter the required data. highHeatValue 
CC476Measured high heat value of the gaseous fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. highHeatValue 
CC479Carbon content of the gaseous fuel, for month(s) [{1}]. Please enter the required data. carbonContent 
CC480Carbon content of the gaseous fuel, for month(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing. carbonContent 
CC481Molecular weight of the gaseous fuel, for month(s) [{1}]. Please enter the required data. molecularWt 
CC482Molecular weight of the gaseous fuel, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. molecularWt 
CC484Volume of the gaseous fuel combusted during month(s) [{1}] from company records is required. Please enter the required data. fuelCombusted 
CC485Volume of the gaseous fuel combusted during month(s) [{1}], from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelCombusted 
CC506bAnnual heat input for the specified fuel combusted by this unit. This data element is required. If the specified fuel was not combusted in this unit during the reporting year, delete it from your report. annualHeatInput 
CC507bAnnual CH4 emissions from combustion of the specified fuel. This data element is required. officialUnroundedCh4 
CC508bAnnual CH4 emissions from combustion of the specified fuel. This data element is required. officialUnroundedCh4 
CC529The cumulative maximum rated heat input capacity for all units within the configuration that have a maximum rated heat input capacity greater than or equal to 10 mmBtu/hr. This data element is required. cumulativeRatedHeatInputCapacity 
CC530The cumulative maximum rated heat input capacity for all units within the configuration that have a maximum rated heat input capacity greater than or equal to 10 mmBtu/hr. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. cumulativeRatedHeatInputCapacity 
CC532Moisture content of the fuel used (percent). This data element is required. equationInput 
CC532-1Moisture content of the fuel used (percent). You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. equationInput 
CC536The annual CH4 as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual CH4 emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier1AnnualCH4CO2E] 
CC537The annual CH4 as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual CH4 emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier2AnnualCH4CO2E] 
CC538The annual CH4 as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual CH4 emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier3AnnualCH4CO2E] 
CC542The annual N2O as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual N2O emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier1AnnualN2OCO2E] 
CC543The annual N2O as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual N2O emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier2AnnualN2OCO2E] 
CC544The annual N2O as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual N2O emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier3AnnualN2OCO2E] 
CC546The annual CH4 as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual CH4 emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier4AnnualCH4CO2E] 
CC548The annual N2O as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual N2O emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier4AnnualN2OCO2E] 
CC558The annual biogenic CO2 emissions of {1} metric tons reported at the configuration level for the unit {2} is greater than the sum of all CO2 emissions reported at the fuel level of {3} metric tons for all fuels at the unit. Please address this critical error. Then you can return here to perform another final review and submit your report. data[subpartCAnnualUnitBiogenicCO2] 
CC561The Equation C-2a calculation method for the unit {1} is not appropriate for Municipal Solid Waste. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] 
CC562The Equation C-2c calculation method is only valid for solid fuels, so the fuel {1} for unit {2} is not appropriate. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] 
CC563The Equation C-3 calculation method is only appropriate for solid fuels, so the fuel {1} for unit {2} is not appropriate. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] 
CC564The Equation C-4 calculation method is only appropriate for liquid fuels, so the fuel {1} for unit {2} is not appropriate. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] 
CC565The Equation C-5 calculation method is only appropriate for gaseous fuels, so the fuel {1} for unit {2} is not appropriate. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] 
CC572GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID 
CC573Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod 
CC574Row {1} of this Tier 2 equation inputs form contains a unit/fuel combination on row {1} that does not exist within e-GGRT for this facility and reporting year. The unit name, fuel name, equation used to calculate CO2 emissions, and whether or not you have elected to use IVT for the unit must match an existing unit/fuel combination within e-GGRT. unitName 
CC575The system encountered an unexpected value in row {1}, Column B7 (Fuel-Specific CH4 Emission Factor). Acceptable values are "0.011 (default)" and "0.001 (alternate)." This file cannot be uploaded. Please correct this issue. ch4EmissionFactor 
CC576The system encountered an unexpected value in row {1}, Column B8 (HHV Calculation Methodology). Acceptable values are "Annual average" and "Weighted average (Equation C-2b)." This file cannot be uploaded. Please correct this issue. highHeatMethod 
CC577The system encountered one or more unexpected values in row {1}, Columns B34-B45 (Identify each month for which the monthly HHV value is calculated using one or more substitute data values). Acceptable values are Yes and No. This file cannot be uploaded. Please correct this issue. isHHVSubstituted 
CC578The system encountered one or more unexpected values in row {1} Column B46 (Frequency of HHV Determinations). Acceptable values are Hourly, Daily, Weekly, Monthly, Semiannually, Quarterly, Once per fuel lot, Upon addition of oil to the storage tank, and Other (specify). This file cannot be uploaded. frequencyHHVDeterminations 
CC579In row {1} you have indicated that the unit was non-operational for one or more months in the monthly HHV portion of the inputs form but not in the monthly quantity portion of the inputs form, or vice versa. This file cannot be uploaded. Please correct this issue. monthlyHighHeatValue 
CC579-1The system encountered an unexpected value in row {1}, column B60 (Ratio of the Boiler&#39; Maximum Rated Heat Input Capacity to its Design Rated Steam Output Capacity). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. boilerHeat 
CC579-2The system encountered one or more unexpected values in row {1}, columns B48-B59 (Total Mass of Steam Generated by MSW or Solid Fuel Combustion During the Month). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyMassOfSteam 
CC579-3The system encountered one or more unexpected values in row {1}, columns B10-B21 (Measured HHV of the Fuel, for Month, or, if Applicable, an Appropriate Substitute Data Value). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyHighHeatValue 
CC579-4The system encountered one or more unexpected values in row {1}, columns B22-B33 (Quantity of the Fuel Combusted, for Month). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyFuelQuantity 
CC579-5The system encountered an unexpected value in row {1}, column B6 (Mass or Volume of Fuel Combusted). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. quantityOfFuel 
CC579-6The system encountered an unexpected value in row {1}, column B9 (Annual Average HHV). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualAverageHHV 
CC579-7The system encountered an unexpected value in row {1}, column B47 (Frequency of HHV Determinations - Specify "Other" Selection). You must enter the frequency at which HHV determinations were made because you selected "Other (specify)" in column B46. This file cannot be uploaded. Please correct this issue. frequencyHHVDeterminationsOther 
CC580GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID 
CC581Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod 
CC582Row {1} of this Tier 3 equation inputs form contains a unit/fuel combination on row {1} that does not exist within e-GGRT for this facility and reporting year. The unit name, fuel name, equation used to calculate CO2 emissions, and whether or not you have elected to use IVT for the unit must match an existing unit/fuel combination within e-GGRT. unitName 
CC583The system encountered an unexpected value in row {1}, Column B8 (Fuel-Specific CH4 Emission Factor). Acceptable values are "0.011 (default)" and "0.001 (alternate)." This file cannot be uploaded. Please correct this issue. ch4EmissionFactor 
CC583-1The system encountered an unexpected value in row {1}, column B7 (Mass or Volume of Fuel Combusted). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualMassorVolOfFuel 
CC583-2The system encountered an unexpected value in row {1}, column B52 (Total Number of Valid Carbon Content Determinations). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. totalValidCC 
CC583-3The system encountered an unexpected value in row {1}, column B53 (Total Number of Carbon Content Substitute Data Values). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. totalCCSubstituteValue 
CC583-4The system encountered an unexpected value in row {1}, column B56 (Total Number of Operating Hours in the Reporting Year for Which Missing Data Substitution was Used for Fuel Usage). You must enter a value that is greater than or equal to zero and less than or equal to 8784. This file cannot be uploaded. Please correct this issue. totalOperatingHour 
CC583-5The system encountered an unexpected value in row {1}, column B57 (Total Number of Valid Molecular Weight Determinations). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. totalValidMW 
CC583-6The system encountered an unexpected value in row {1}, column B58 (Total Number of Molecular Weight Substitute Data Values). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. totalMWSubstituteValue 
CC584The system encountered an unexpected value in row {1}, Column B9 (Carbon Content Methodology). Acceptable values are "Annual average" and "Weighted average (Equation C-2b)." This file cannot be uploaded. Please correct this issue. ccCalcMethod 
CC584-1The system encountered an unexpected value in row {1}, column B10 (Annual Average Carbon Content). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualAverageCCFuel 
CC585The system encountered an unexpected value in row {1}, Column B11 (Molecular Weight Calculation Methodology for Gaseous Fuel). Acceptable values are "Annual average" and "Weighted average (Equation C-2b)." This file cannot be uploaded. Please correct this issue. mwCalcMethod 
CC585-1The system encountered an unexpected value in row {1}, column B12 (Annual Average Molecular Weight). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualAvgMWFuel 
CC586The system encountered an unexpected value in row {1}, Column B13 (Molar Volume Constant Used). Acceptable values are "836.6 (Scf/kg-mole)" and "849.5 (Scf/kg-mole)" This file cannot be uploaded. Please correct this issue. molarVolumeConstant 
CC587The system encountered an unexpected value in row {1}, Column B14 (HHV Calculation Methodology). Acceptable values are "Annual average" and "Default." This file cannot be uploaded. Please correct this issue. hhvCalcMethod 
CC587-1The system encountered an unexpected value in row {1}, column B15 (Annual Average HHV). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualAvgHHV 
CC588The system encountered an unexpected value in row {1} Column B54 (Frequency of Carbon Content Determinations). Acceptable values are Hourly, Daily, Weekly, Monthly, Semiannually, Quarterly, Once per fuel lot, Upon addition of oil to the storage tank, Other (specify). This file cannot be uploaded. Please correct this issue. frequencyCCDeterminations 
CC588-1You did not provide a value in row {1}, column B55 (Frequency of Carbon Content - Specify "Other" Selection). You must enter the frequency at which Frequency of Carbon Content determinations were made because you selected "Other (specify)" in column B54. This file cannot be uploaded. Please correct this issue. frequencyCCDeterminationsOther 
CC589The system encountered an unexpected value in row {1} Column B59 (Frequency of Molecular Weight Determinations). Acceptable values are Hourly, Daily, Weekly, Monthly, Semiannually, Quarterly, Once per fuel lot, Upon addition of oil to the storage tank, Other (specify). This file cannot be uploaded. Please correct this issue. frequencyMWDDeterminations 
CC589-1You did not provide a value in row {1}, column B60 (Frequency of Molecular Weight - Specify "Other" Selection). You must enter the frequency at which Frequency of Molecular Weight determinations were made because you selected "Other (specify)" in column B59. This file cannot be uploaded. Please correct this issue. frequencyMWDDeterminationsOther 
CC590In row {1} you have not consistently indicated that the unit was non-operational for one or more months. If the unit was non-operational for a certain month, please be sure you have reported "NA" for the monthly carbon content and monthly fuel quantity fields. This file cannot be uploaded. Please correct this issue. monthlyCarbonContent 
CC591In row {1} you have not consistently indicated that the unit was non-operational for one or more months. If the unit was non-operational for a certain month, please be sure you have reported "NA" for the monthly carbon content, monthly molecular weight (only for gaseous fuels), and monthly fuel quantity fields. This file cannot be uploaded. Please correct this issue. monthlyMolecularWeight 
CC591-1The system encountered one or more unexpected values in row {1}, columns B28-B39 (Quantity of the Fuel Combusted, for Month). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyFuelQuantity 
CC591-2The system encountered one or more unexpected values in row {1}, columns B16-B27 (Monthly Carbon Content). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyCarbonContent 
CC591-3The system encountered one or more unexpected values in row {1}, columns B40-B51 (Monthly Molecular Weight of the Gaseous Fuel). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyMolecularWeight 
CC602The highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. This data element cannot be greater than the cumulative maximum rated heat input capacity. cumulativeRatedHeatInputCapacity 
CC854You have reported all zeros or a combination of non-zero and zero values for equation inputs for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted or enter non-zero values for all equation inputs. You must correct this before continuing or click Cancel. monthApplicable 
CC855You have reported a zero for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted. You must correct this before continuing or click Cancel. monthApplicable 
CCFuel-1The "Other Fuel or Blend" that you are attempting to add is already included in the Table C-1 pick list shown on the previous page. Please click CANCEL to return to the previous page and choose a fuel from standard fuel types listed. If you truly have a non-standard fuel type not listed in Table C-1, enter the unique name here./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/UnitIdentification/UnitNamecustomFuelExistsSubpart C must include at least one <UnitsCDetails> node with a <UnitName>
CFM-1This fuel is already being used in this Unit for this facility. Please select a different fuel. fuel 
CIVT-C854You have reported all zeros or a combination of non-zero and zero values for equation inputs for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted or enter non-zero values for all equation inputs. You must correct this before continuing or click Cancel. monthApplicable 
CIVT-C855You have reported a zero for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted. You must correct this before continuing or click Cancel. monthApplicable 
C (Abbr)FM-1This fuel is already being used in this Unit for this facility. Please select a different fuel. fuel 
CCCC009Is this manufacturing line\'s emissions monitored using a CEMS?. This data element is required. Please enter the required data or click CANCEL. hasCEMS 
CCCC011Calculation method used to estimate CO2 process emissions. This data element is required. co2EmissionCalculationMethod 
CCCC013Annual production of soda ash. This data element is required. annualProductionOfSodaAsh 
CCCC014Annual production of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionOfSodaAsh 
CCCC016Annual production capacity of soda ash. This data element is required. annualProductionCapacityOfSodaAsh 
CCCC017Annual production capacity of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionCapacityOfSodaAsh 
CCCC019Annual CO2 process emissions for the manufacturing line. This data element is required. co2EmissionsEqCC5 
CCCC020Annual CO2 emissions for the manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2EmissionsEqCC5 
CCCC021The number of months that missing data procedures were followed to determine the process vent flow rate from mine water stripper/evaporator. This data element is required. numberOfMonthsMissingDataProcessVentFlow 
CCCC022Total number of soda ash manufacturing lines not monitored by CEMS. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSodaAshNoCemsProcessLines 
CCCC032The number of months that missing data procedures were followed to determine the monthly mass of soda ash. This data element is required. monthlySodaAshMass 
CCCC035The number of weeks that missing data procedures were followed to determine the inorganic carbon content of soda ash. This data element is required. monthlySodaAshCarbonContent 
CCCC036The number of weeks that missing data procedures were followed to determine the inorganic carbon content of soda ash. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing. monthlySodaAshCarbonContent 
CCCC040The number of months that missing data procedures were followed to determine the monthly mass of trona. This data element is required. monthlyTronaMass 
CCCC043The number of weeks that missing data procedures were followed to determine the inorganic carbon content of trona. This data element is required. monthlyTronaCarbonContent 
CCCC044The number of weeks that missing data procedures were followed to determine the inorganic carbon content of trona. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing. monthlyTronaCarbonContent 
CCCC047Annual consumption of trona for each manufacturing line. This data element is required. annualConsumptionOfTrona 
CCCC048Annual consumption of trona for each manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualConsumptionOfTrona 
CCCC050Annual consumption of liquid alkaline for each manufacturing line. This data element is required. annualConsumptionOfLiquidAlkaline 
CCCC051Annual consumption of liquid alkaline for each manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualConsumptionOfLiquidAlkaline 
CCCC053Annual production of soda ash. This data element is required. annualProductionOfSodaAsh 
CCCC054Annual production of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionOfSodaAsh 
CCCC056Annual production capacity of soda ash. This data element is required. annualProductionCapacityOfSodaAsh 
CCCC057Annual production capacity of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionCapacityOfSodaAsh 
CCCC123You have added Subpart CC, but have not yet added a manufacturing line. sodaAshUnitNoCemsDTOMap[1] 
CCCEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
CCCEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
CCCEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
CCCML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
CCCML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
CCCML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
CCCML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
CCCML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
CCCML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
CCCML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
CCCML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
CCCML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
CCCML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
CCCML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
CCCML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
CCCML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
CCCML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
CCCML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
CCCML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
CCCML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
CCCML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
CCCML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
CCCML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
CCCML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
CCCML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
CCCML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
CCCML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
CCCML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
CCCML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
CCCML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
CCCML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
CCCML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
CCCML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
CCCML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
CCCML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
CCCML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
CCCML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
CCCML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
CCCML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
CCCML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
CCCML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
CCUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
CCUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
DALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
DALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
DD-EF-1You have not added a fuel for this unit, pipe, or stack./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/TierFuelDetails/FuelType>nofuelsEach unit must include at least one <FuelType>
DD-EU-1You have selected Subpart D for reporting, but you have not yet added a unit, pipe, or stack./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenounitsSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
DD001Part 75 methodology. This data element is required. part75Methodology 
DD002You did not indicate if this unit or group of units reports under Part 75 (Acid Rain Program). This data element is required. hasAcidRainProgram 
DD003You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate 
DD004Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate 
DD005Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate 
DD006Please select a fuel or click CANCEL. fuelName 
DD007Please provide a fuel name or click CANCEL. fuelName 
DD008Fuel type. This is a required field. Please make a selection or click CANCEL. fuelType 
DD009bCarbon dioxide equivalent value for the annual methane emissions from combustion of the specified fuel. This data element is required. officialUnroundedCo2EquivalentCh4 
DD009cCarbon dioxide equivalent value for the annual methane emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 
DD010Carbon dioxide equivalent value for the annual methane emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 
DD012bCarbon dioxide equivalent value for the annual nitrous oxide emissions from combustion of the specified fuel. This data element is required. officialUnroundedCo2EquivalentN2o 
DD012cCarbon dioxide equivalent value for the annual nitrous oxide emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o 
DD013Carbon dioxide equivalent value for the annual nitrous oxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o 
DD015Annual carbon dioxide emissions (metric tons) from combustion of the specified fuel. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartD/UnitDDetail/AnnualCO2EmissionsMonitoredLocationMetricTonssofficialUnroundedCo2Within the <UnitDDetails> for the applicable unit  in the < AnnualCO2EmissionsMonitoredLocationMetricTons > node must be included with a non-null <CalculatedValue>
DD015XAnnual carbon dioxide emissions (metric tons) from combustion of the specified fuel. This data element can not be smaller than the biogenic carbon dioxide mass emissions. officialUnroundedCo2 
DD016Annual carbon dioxide emissions (metric tons) from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 
DD018Annual carbon dioxide emissions (short tons) from combustion of the specified fuel. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartD/UnitDDetails/AnnualCO2EmissionsMonitoredLocationShortTonsofficialUnroundedCo2ShorttonWithin the <UnitDDetails> for the applicable unit  in the < AnnualCO2EmissionsMonitoredLocationShortTons > node must be included with a non-null <CalculatedValue>
DD019Annual carbon dioxide emissions (short tons) from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2Shortton 
DD021Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartD/UnitDDetails/ AnnualCO2EmissionsAllBiomassFuelsCombinedofficialUnroundedAllBiomassFuelsCombinedCo2Within the <UnitDDetails> for the applicable unit  in the < AnnualCO2EmissionsAllBiomassFuelsCombined > node must be included with a non-null <CalculatedValue>
DD022Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 
DD024Total number of source operating hours in the reporting year that carbon dioxide concentration was missing. This data element is required. operatingHoursCo2Missing 
DD025Total number of source operating hours in the reporting year that carbon dioxide concentration was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursCo2Missing 
DD027Total number of source operating hours in the reporting year that stack gas flow rate was missing. This data element is required. operatingHoursStackGasFlowMissing 
DD028Total number of source operating hours in the reporting year that stack gas flow rate was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursStackGasFlowMissing 
DD032Total number of source operating hours in the reporting year that fuel carbon content was missing. This data element is required. operatingHoursCCMissing 
DD033Total number of source operating hours in the reporting year that fuel carbon content was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursCCMissing 
DD035Total number of source operating hours in the reporting year that fuel flow rate was missing. This data element is required. operatingHoursFuelFlowRateMissing 
DD036Total number of source operating hours in the reporting year that fuel flow rate was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursFuelFlowRateMissing 
DD038Total number of source operating hours in the reporting year that higher heating value was missing. This data element is required. operatingHoursHHVMissing 
DD039Total number of source operating hours in the reporting year that higher heating value was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursHHVMissing 
DD050bAnnual heat input. This data element is required. annualHeatInput 
DD050cAnnual heat input. Annual heat input for the specified fuel combusted by this unit (for Table C-2 components of the blend). This data element is required. If the specified fuel was not combusted in this unit during the reporting year, delete it from your report. annualHeatInput 
DD051Annual heat input. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualHeatInput 
DD053bAnnual CH4 emissions from combustion of the specified fuel. This data element is required. officialUnroundedCh4 
DD054Annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
DD056bAnnual N2O emissions from combustion of the specified fuel. This data element is required. officialUnroundedN2o 
DD057Annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o 
DD059bReport which CH4 result. This data element is required. isUserOverriddenCh4 
DD059cUse which CH4 result? This data element is required. isUserOverriddenCh4 
DD060bReport which N2O result?. This data element is required. isUserOverriddenN2o 
DD060cUse which N2O result? This data element is required. isUserOverriddenN2o 
DD064cPlant code(s) associated with any combustion unit(s) included in this configuration. This data element is required. plantCodeList 
DD070The annual CH4 emissions for Subpart D have not been reported. This data element is required. transientData['subpartDAnnualCh4'] 
DD071The annual N2O emissions for Subpart D have not been reported. This data element is required. transientData['subpartDAnnualN2o'] 
DD072The annual CO2 emissions for Subpart D have not been reported. This data element is required. transientData['subpartDAnnualCo2'] 
DD073The value for the unit of measure for the reported data element "Annual CO2 Emissions Including Biomass (short tons)" for the unit(s) {1} was reported as something other than "Short Tons" in your XML submission. This unit of measure should be reported as "Short Tons". Please review the XML "AnnualCO2EmissionsMonitoredLocationShortTons" data element for this unit(s). Please address this critical error. Then you can return here to perform another final review and submit your report. data['failedShortTonsValidation'] 
DD074The value for the unit of measure for the reported data element "Annual CO2 Emissions Including Biomass (metric tons)" for the unit(s) {1} was reported as something other than "Metric Tons" in your XML submission. This unit of measure should be reported as "Metric Tons". Please review the XML "AnnualCO2EmissionsMonitoredLocationMetricTons" data element for this unit(s). Please address this critical error. Then you can return here to perform another final review and submit your report. data['failedMetricTonsValidation'] 
DD101The same unit, stack or pipe ID already exists for this facility. Please enter a unique unit, stack or pipe ID. If the calculation methodology changed during the reporting year, use the base name or identifier for the methodology used at the end of the reporting year (e.g. "CT3"), and append an indicator to the base unit, stack, or pipe ID (e.g. "CT3-CEMS" or "CT3-G4") for methodologies used earlier in the reporting year. groupUnitName 
DD102Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. groupUnitName 
DD103Unit type. This data element is required. Please enter the required data or click CANCEL. groupUnitType 
DUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
DUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
DDALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
DDALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
DDDD0001GHGRP ID. This data element is required and must be the same as the GHGRP ID for the facility. ghgrpid 
DDDD0002Reporting Period. This data element is required and must be the same as the calendar year for which data is reported. reportingPeriod 
DDDD0003Length of transmission lines carrying voltages above 35 kilovolt. This data element is required. transLinesAbove35Length 
DDDD0005Were missing data used for the length of transmission lines carrying voltages above 35 kilovolt. This data element is required. transLinesAbove35Missing 
DDDD0006If missing data procedures were used for the length of transmission lines carrying voltage above 35 kilovolts, you must provide a reason the data were missing. transLinesAbove35Reason 
DDDD0007If missing data procedures were used for the length of transmission lines carrying voltage above 35 kilovolts, you must report the method used for estimating missing data. transLinesAbove35Method 
DDDD0008Length of distribution lines carrying voltages at or below 35 kilovolt. This data element is required. distLinesAtBelow35Length 
DDDD0010Were missing data used for the length of distribution lines carrying voltages at or below 35 kilovolt? This data element is required. distLinesAtBelow35Missing 
DDDD0011If missing data procedures were used for the length of distributions lines carrying voltage at or below 35 kilovolt, please report the reason the data were missing. This data element is required. distLinesAtBelow35Reason 
DDDD0012If missing data procedures were used for the length of distributions lines carrying voltage at or below 35 kilovolt, please report the method used for estimating missing data. This data element is required. distLinesAtBelow35Method 
DDDD0374Beginning Nameplate Capacity, excluding hermetically sealed-pressure switchgear. This data element is required. beginningNameplateCapacity 
DDDD0376Beginning Nameplate Capacity, excluding hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. beginningNameplateCapacity 
DDDD0383Were missing data used for the quantity of the GHG stored in containers, but not in energized equipment, at the beginning of the year? This data element is required. contNotEnergizedBegMissing 
DDDD0384Containers Not Energized At Beginning of Year. If missing data were used for the quantity of GHG stored in containers but not in energized equipment at the beginning of the year, you must provide a reason the data were missing. contNotEnergizedBegReason 
DDDD0385Containers Not Energized At Beginning of Year. If missing data were used for the quantity of GHG stored in containers but not in energized equipment at the beginning of the year, you must report the method used for estimating missing data. contNotEnergizedBegMethod 
DDDD0386Were missing data used for the quantity of the GHG stored in containers, but not in energized equipment, at the end of the year? This data element is required. contNotEnergizedEndMissing 
DDDD0387Containers Not Energized At End of Year. If missing data were used for the quantity of GHG stored in containers but not in energized equipment at the end of the year, you must provide a reason the data were missing. contNotEnergizedEndReason 
DDDD0388Containers Not Energized At End of Year. If missing data were used for the quantity of GHG stored in containers but not in energized equipment at the end of the year, you must report the method used for estimating missing data. contNotEnergizedEndMethod 
DDDD0389Were missing data used for the quantity of the GHG purchased in bulk from chemical producers or distributors? This data element is required. bulkChemProducersMissing 
DDDD0390Purchased GHG From Bulk Chemical Producers. If missing data were used for the quantity of GHG purchased in bulk from chemical producers or distributers, you must provide a reason the data were missing. bulkChemProducersReason 
DDDD0391Purchased From Bulk Chemical Producers. If missing data were used for the quantity of GHG purchased in bulk from chemical producers or distributers, you must report the method used for estimating missing data. bulkChemProducersMethod 
DDDD0392Were missing data used for the quantity of the GHG purchased from equipment manufacturers or distributors with or inside equipment, including hermetically sealed-pressure switchgear? This data element is required. insideEqMissing 
DDDD0393Inside Equipment. If missing data procedures were used for the quantity of GHG purchased from equipment manufacturers or distributors with or inside equipment (including hermetically sealed pressure switchgear), you must provide a reason the data were missing. insideEqReason 
DDDD0394Inside Equipment. If missing data procedures were used for the quantity of GHG purchased from equipment manufacturers or distributors with or inside equipment (including hermetically sealed pressure switchgear), you must report the method used for estimating missing data. insideEqMethod 
DDDD0395Were missing data used for the quantity of the GHG returned to facility after off-site recycling? This data element is required. returnedAfterRecycleMissing 
DDDD0396Returned After Off-site Recycling. If missing data were used for the quantity of GHG returned to the facility after off-site recycling, you must provide a reason the data were missing. returnedAfterRecycleReason 
DDDD0397Returned After Off-site Recycling. If missing data were used for the quantity of GHG returned to the facility after off-site recycling, you must report the method used for estimating missing data. returnedAfterRecycleMethod 
DDDD0398Were missing data used for the quantity of the GHG in bulk and contained in equipment sold to other entities? This data element is required. eqSoldMissing 
DDDD0399Equipment Sold. If missing data procedures were used for the quantity of GHG in bulk and contained in equipment sold to other entities, you must provide a reason the data were missing. eqSoldReason 
DDDD0400Equipment Sold. If missing data procedures were used for the quantity of GHG in bulk and contained in equipment sold to other entities, you must report the method used for estimating missing data. eqSoldMethod 
DDDD0401Were missing data used for the quantity of the GHG returned to suppliers? This data element is required. returnToSuppliersMissing 
DDDD0402Returned to Suppliers. If missing data procedures were used for the quantity of GHG returned to suppliers, you must provide a reason the data were missing. returnToSuppliersReason 
DDDD0403Returned to Suppliers. If missing data procedures were used for the quantity of GHG returned to suppliers, you must report the method used for estimating missing data. returnToSuppliersMethod 
DDDD0404Were missing data used for the quantity of the GHG sent off-site for recycling? This data element is required. sentOffRecycleMissing 
DDDD0405Sent Off Recycle. If missing data procedures were used for the quantity of GHG sent off site for recycling, you must provide a reason the data were missing. sentOffRecycleReason 
DDDD0406Sent Off Recycle. If missing data procedures were used for the quantity of GHG sent off site for recycling, you must report the method used for estimating missing data. sentOffRecycleMethod 
DDDD0407Were missing data used for the quantity of the GHG sent off-site for destruction? This data element is required. destructionMissing 
DDDD0408Destruction. If missing data procedures were used for the quantity of GHG sent off site for destruction, you must provide a reason the data were missing. destructionReason 
DDDD0409Destruction. If missing data procedures were used for the quantity of GHG sent off site for destruction, you must report the method used for estimating missing data. destructionMethod 
DDDD0415SF6 or PFC: Pounds of SF6 or PFC stored in containers, but not in energized equipment, at the beginning of the year. This data element is required. notEnergizedBegLbs 
DDDD0417SF6 or PFC: Pounds of SF6 or PFC stored in containers, but not in energized equipment, at the end of the year. This data element is required. notEnergizedEndLbs 
DDDD0419SF6 or PFC: Pounds of SF6 or PFC purchased from chemical producers or distributors in bulk. This data element is required. purchasedFromChemLbs 
DDDD0421SF6 or PFC: Pounds of SF6 or PFC purchased from equipment manufacturers or distributors with or inside equipment, including hermetically sealed-pressure switchgear. This data element is required. purchasedFromEqManufLbs 
DDDD0423SF6 or PFC: Pounds of SF6 or PFC returned to facility after off-site recycling. This data element is required. offSiteRecycleReturnLbs 
DDDD0425SF6 or PFC: Pounds of SF6 or PFC in bulk and contained in equipment that is sold to other entities. This data element is required. eqSoldLbs 
DDDD0427SF6 or PFC: Pounds of SF6 or PFC returned to suppliers. This data element is required. returnedToSuppliersLbs 
DDDD0429SF6 or PFC: Pounds of SF6 or PFC sent off site for recycling. This data element is required. sentOffRecycleLbs 
DDDD0431SF6 or PFC: Pounds of SF6 or PFC sent off-site for destruction. This data element is required. sentOffDestructionLbs 
DDDD0432Total facility GHG emissions according to Equation DD-1. This data element is required. userEmissionLbs 
DDDD0433Total facility GHG emissions according to Equation DD-1. You must enter values that result in an emission value that is greater than or equal to 0. You must correct the current value before continuing. userEmissionLbs 
DDDD0434Were missing data methods used for nameplate capacity of new equipment other than hermetically sealed-pressure switchgear during the year? This data element is required. wereMissingHermeticallySealed 
DDDD0435New equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. reasonHermeticallySealed 
DDDD0436New equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, report the method used for estimating the missing data. This data element is required. methodHermeticallySealed 
DDDD0437Were missing data methods used for nameplate capacity of retired equipment other than hermetically sealed-pressure switchgear during the year? This data element is required. wereMissingUsedCapacityRetired 
DDDD0438Retired equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. capacityRetiredEqReason 
DDDD0439Retired equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, report the method used for estimating the missing data. This data element is required. capacityRetiredEqMethod 
DDDD0440Were missing data methods used for the number of new hermetically sealed-pressure switchgear? This data element is required. wereMissingUsedNewHerm 
DDDD0441New hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. newHermReason 
DDDD0442New hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, report the method used for estimating the missing data. This data element is required. newHermMethod 
DDDD0443Were missing data methods used for the number of new equipment other than hermetically sealed-pressure switchgear? This data element is required. wereMissingUsedEquipOther 
DDDD0444New equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. equipOtherReason 
DDDD0445New equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, report the method used for estimating the missing data. This data element is required. equipOtherMethod 
DDDD0446Were missing data methods used for the number of retired hermetically sealed-pressure switchgear? This data element is required. wereMissingUsedRetiredHerm 
DDDD0447Retired hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. retiredHermReason 
DDDD0448Retired hermetically sealed-pressure switchgear. If you used the missing data procedures for this data element, you must report the method used for estimating missing data. This data element is required. retiredHermMethod 
DDDD0449Were missing data methods used for the number of retired equipment other than hermetically sealed-pressure switchgear? This data element is required. wereMissingUsedRetiredEqOther 
DDDD0450Retired equipment other than hermetically sealed-pressure switchgear. If you used the missing data procedures for this data element, you must provide a reason the data were missing. retiredEqOtherReason 
DDDD0451Retired equipment other than hermetically sealed-pressure switchgear. If you used the missing data procedures for this data element, you must report the method used for estimating missing data. This data element is required. retiredEqOtherMethod 
DDDD0453SF6 or PFC: Nameplate Capacity of new equipment other than hermetically sealed-pressure switchgear. This data element is required. nameplateCapacityNewEquip 
DDDD0455SF6 or PFC: Nameplate Capacity of retired equipment other than hermetically sealed-pressure switchgear. This data element is required. nameplateCapacityRetiringEquip 
DDDD0456New hermetically sealed-pressure switchgear. This data element is required. newHermeticallySealed 
DDDD0457New hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to 0. You must correct the current value before continuing. newHermeticallySealed 
DDDD0458New equipment other than hermetically sealed-pressure switchgear. This data element is required. newEquipment 
DDDD0459New equipment other than hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to 0. You must correct the current value before continuing. newEquipment 
DDDD0460Retired hermetically sealed-pressure switchgear. This data element is required. retired 
DDDD0461Retired hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to 0. You must correct the current value before continuing. retired 
DDDD0462Retired equipment other than hermetically sealed-pressure switchgear. This data element is required. retiredEquipment 
DDDD0463Retired equipment other than hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to 0. You must correct the current value before continuing. retiredEquipment 
DDDD0464State(s) or territory in which the facility lies. This data element is required. tableData1 
DDDD0465Were missing data used for nameplate capacity of new hermetically-sealed pressure switchgear during the year? This data element is required. newEqMissing 
DDDD0466New hermetically sealed-pressure switchgear. If missing data procedures were used for the nameplate capacity of new hermetically-sealed pressure switchgear, you must report the method used for estimating missing data. newEqReason 
DDDD0467New hermetically sealed-pressure switchgear. If missing data procedures were used for the nameplate capacity of new equipment (including hermetically-sealed pressure switchgear), you must report the method used for estimating missing data. newEqMethod 
DDDD0468Were missing data used for the nameplate capacity of retired hermetically-sealed pressure switchgear during the year? This data element is required. retiredEqMissing 
DDDD0469Retired hermetically-sealed pressure switchgear. If missing data procedures were used for the nameplate capacity of retired hermetically-sealed pressure switchgear, you must provide a reason the data were missing. retiredEqReason 
DDDD0470Retired hermetically-sealed pressure switchgear. If you used the missing data procedures for this data element, you must report the method used for estimating missing data. This data element is required. retiredEqMethod 
DDDD0480SF6 or PFC: Nameplate Capacity of new hermetically sealed-pressure switchgear (pounds). This data element is required. nameplateCapacityNewLbs 
DDDD0482SF6 or PFC: Nameplate Capacity of retired hermetically sealed-pressure switchgear (pounds). This data element is required. nameplateCapacityRetiringLbs 
DDDD0483The result of beginning nameplate capacity plus net increase in total nameplate capacity is not greater than zero. Please check the values you entered and correct before continuing. nameplateCapacityNewLbs 
DDDD0497GHGs are estimated for this facility. This data element is required. isGasReported 
DDDD1000You have selected Subpart DD for reporting, but you have not yet uploaded a reporting form file. jctSubPartFacility 
EE001Annual nitrous oxide emissions from adipic acid production. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameofficialUnroundedN2oSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE004You have not selected the methodology used to estimate emissions from this facility. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamesubtypeSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE005Annual nitrous oxide emissions from adipic acid production that is sold or transferred off site. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualN2OTransferredSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE006Annual nitrous oxide emissions from adipic acid production that is sold or transferred off site. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualN2OTransferredSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE009The number of distinct abatement technologies. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfAbatementSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE010The number of distinct abatement technologies. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfAbatementSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE012Nonselective catalytic reduction (NSCR) was used as an abatement technology (Yes/No). This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameisNSCRUsedSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE013Number of months a missing data procedure was used to measure adipic acid production. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfMonthsMissingSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE024You have selected Subpart E for reporting, but you have not yet added a unit./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamegroupUnitSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE025You have not selected the methodology used to estimate emissions from this facility. This data element is required. Please make a selection, or click CANCEL./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamesubtypeSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE026Name of administrator-approved alternative method. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenameOfAltMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE027Administrator-approved alternative method request date. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamealtMethodReqDateSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE028Administrator-approved alternative method request date. You can not have an approval date before a request date/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamealtMethodReqDateSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE029Administrator-approved alternative method approval date. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamealtMethodaprDateSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE031Method used for the performance test. This data element is required/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemethodForTestSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE032Number of times that a performance test had to be repeated. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfTestRunsRepeatedSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE033Number of times that a performance test had to be repeated. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfTestRunsRepeatedSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE053"Other" abatement technologies were used. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameisOtherAbatementUsedSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE201Date of installation of abatement technology. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedtOfInstallationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EE202Is this a previously approved alternative method? This data element is required. Please make a selection, or click CANCEL./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameisPrevApprMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
EUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
EECEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
EECEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
EECEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
EECML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
EECML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
EECML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
EECML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
EECML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
EECML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
EECML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
EECML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
EECML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
EECML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
EECML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
EECML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
EECML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
EECML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
EECML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
EECML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
EECML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
EECML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
EECML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
EECML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
EECML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
EECML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
EECML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
EECML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
EECML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
EECML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
EECML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
EECML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
EECML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
EECML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
EECML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
EECML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
EECML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
EECML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
EECML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
EECML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
EECML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
EECML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
EEEE-EU-1You have selected Subpart EE for reporting, but you have not yet added a unit./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenounitsSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE008Annual consumption of Petroleum Coke. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualConsumptionOfPetroleumCokeSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE009Annual consumption of Petroleum Coke. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualConsumptionOfPetroleumCokeSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE010Annual production of Titanium Dioxide. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionOfTitaniumDioxideSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE011Annual production of Titanium Dioxide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing../GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionOfTitaniumDioxideSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE012Annual production capacity of Titanium Dioxide. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionCapacityOfTitaniumDioxideSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE013Annual production capacity of Titanium Dioxide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionCapacityOfTitaniumDioxideSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE014Annual production of carbon-containing waste. This data element is required. Enter 0 if your facility does not produce carbon-containing waste./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionOfCarbonContainingWasteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE015Annual production of carbon-containing waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionOfCarbonContainingWasteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE016Total number of chloride process lines not monitored by CEMS. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfNonCemsProcessLinesSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE021Unique Name Identifier. This data element is required. Please enter a name or identifier or click CANCEL./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameunitNameIdentifierSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE022Annual production of Carbon-Containing Waste. This data element is required. Enter 0 if your facility does not produce carbon-containing waste./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionOfCarbonContainingWasteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE023Carbon content of Carbon-Containing Waste. This data element is required. Enter 0 if your facility does not produce carbon-containing waste./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamecarbonContentOfCarbonContainingWasteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE024Number of months missing data procedures were used to determine monthly generation of Carbon-Containing Waste. This data element is required. Enter 0 if your facility does not produce carbon-containing waste./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfMonthsMissingDataSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE025Annual consumption of Petroleum Coke. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualConsumptionOfPetroleumCokeSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE026Annual production capacity of Titanium Dioxide. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionCapacityOfTitaniumDioxideSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE028Titanium Dioxide production for January. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production1.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE029Test method used in January to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production1.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE030Titanium Dioxide production for February. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production2.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE031Test method used in February to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production2.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE032Titanium Dioxide production for March. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production3.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE033Test method used in March to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production3.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE034Titanium Dioxide production for April. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production4.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE035Test method used in April to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production4.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE036Titanium Dioxide production for May. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production5.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE037Test method used in May to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production5.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE038Titanium Dioxide production for June. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production6.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE039Test method used in June to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production6.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE040Titanium Dioxide production for July. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production7.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE041Test method used in July to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production7.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE042Titanium Dioxide production for August. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production8.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE043Test method used in August to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production8.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE044Titanium Dioxide production for September. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production9.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE045Test method used in September to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production9.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE046Titanium Dioxide production for October. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production10.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE047Test method used in October to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production10.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE048Annual total Titanium Dioxide production. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualTitaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE049Sampling analysis result of Carbon Content of Petroleum Coke as determined for QA/QC of supplier data under 98.314(d). This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamesamplingAnalysisResultSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE050Annual production of Carbon-Containing Waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionOfCarbonContainingWasteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE051Carbon content of Carbon-Containing Waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamecarbonContentOfCarbonContainingWasteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE052Carbon content of Carbon-Containing Waste. You must enter a value that is between 0 and 1. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamecarbonContentOfCarbonContainingWasteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE053Number of months missing data procedures were used to determine monthly generation of Carbon-Containing Waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfMonthsMissingDataSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE054Number of months missing data procedures were used to determine monthly generation of Carbon-Containing Waste. You must enter a value that is between 0 and 12. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenumberOfMonthsMissingDataSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE055Annual consumption of Petroleum Coke. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualConsumptionOfPetroleumCokeSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE056Annual production capacity of Titanium Dioxide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualProductionCapacityOfTitaniumDioxideSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE058Titanium Dioxide production for January. You must enter a value that is greater than zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production1.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE059Titanium Dioxide production for February. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production2.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE060Titanium Dioxide production for March. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production3.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE061Titanium Dioxide production for April. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production4.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE062Titanium Dioxide production for May. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production5.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE063Titanium Dioxide production for June. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production6.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE064Titanium Dioxide production for July. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production7.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE065Titanium Dioxide production for August. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production8.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE066Titanium Dioxide production for September. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production9.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE067Titanium Dioxide production for October. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production10.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE068Titanium Dioxide production for November. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production11.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE069Titanium Dioxide production for December. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production12.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE070Annual total Titanium Dioxide production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualTitaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE071Unique Name Identifier. This data element is required. Please enter a name or identifier or click CANCEL./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameunitNameIdentifierSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE072Sampling analysis result of Carbon Content of Petroleum Coke as determined for QA/QC of supplier data under 98.314(d). This data element value must be between 0 and 1, expressed as a decimal fraction only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamesamplingAnalysisResultSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE101Total Number of Process Lines. You must add at least one process line./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNametransientData['totalNumberOfProcessLines']Subpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE106Titanium Dioxide production for November. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production11.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE107Test method used in November to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production11.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE108Titanium Dioxide production for December. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production12.titaniumDioxideProductionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
EEEE109Test method used in December to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemonthlyTiO2Production12.testMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF701You have added Subpart F, but have not specified the type of smelter technology used./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamesmelterTechSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF714Method used to measure the frequency and duration of anode effects (or overvoltage). This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemethodUsedSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF715Number of months in the reporting year that missing data procedures were followed to measure the anode effect overvoltage emission factor (i.e., potline overvoltage and/or current efficiencies). Enter 0 (zero) if missing data procedures were not used. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameovervoltageMMSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF716Number of months in the reporting year that missing data procedures were followed to measure the anode effect overvoltage emission factor (i.e., potline overvoltage and/or current efficiencies). This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameovervoltageMMSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF717Number of months in the reporting year that missing data procedures were followed to measure the anode effect minutes per cell day (i.e., anode effect frequency and/or anode effect duration). Enter 0 (zero) if missing data procedures were not used. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameminutesCellDayMMSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF718Number of months in the reporting year that missing data procedures were followed to measure the anode effect minutes per cell day (i.e., anode effect frequency and/or anode effect duration). This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameminutesCellDayMMSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF719Number of months in the reporting year that missing data procedures were followed to measure the anode consumption. Enter 0 (zero) if missing data procedures were not used. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameanodeConsumptionMMSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF720Number of months in the reporting year that missing data procedures were followed to measure the anode consumption. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameanodeConsumptionMMSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF721Number of months in the reporting year that missing data procedures were followed to measure the anode paste consumption. Enter 0 (zero) if missing data procedures were not used. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameanodePasteMMSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF722Number of months in the reporting year that missing data procedures were followed to measure the anode paste consumption. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameanodePasteMMSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF723You have selected Subpart F for reporting, but you have not yet added a smelter or potline./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamegroupUnitSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF726Annual Anode effect minutes per cell-day. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameaeMinutesSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF727Annual Anode effect minutes per cell-day. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameaeMinutesSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF729Annual anode effect frequency. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameaeFrequencySubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF732Enter Own Result for Annual CF4 (perfluoromethane) mass emissions. This data element is required if you select Enter/Report Alternate Result./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameofficialUnroundedCf4Subpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF733Enter Own Result for Annual C2F6 (perfluoroethane) mass emissions. This data element is required if you select Enter/Report Alternate Result./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameofficialUnroundedC2f6Subpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF735Annual anode effect overvoltage. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameaeOvervoltageFactorSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF736Annual anode effect overvoltage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameaeOvervoltageFactorSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF737Annual potline overvoltage. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameavgPotlineOvervoltageSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF738Annual potline overvoltage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameavgPotlineOvervoltageSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF739Current efficiency. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameavgCurrentEfficiencySubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF740Current efficiency. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameavgCurrentEfficiencySubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF741Smelter-specific slope coefficient (or overvoltage emission factor). This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamesmelterSlopeCoefficientSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF742Smelter-specific slope coefficient (or overvoltage emission factor). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamesmelterSlopeCoefficientSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF744Annual anode effect frequency. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameaeFrequencySubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF746Annual anode effect duration. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameaeDurationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF747Annual anode effect duration. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameaeDurationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF750Smelter technology. You must select a value from the listed options before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamesmelterTechSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF751Method used for estimating PFC emissions. You must select a value from the listed options before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemethodUsedForPFCSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF780The last date when the smelter-specific slope coefficients were measured. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamelasteDateMeasuredSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF783Annual Anode Consumption. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualAnodeConsumptionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF784Annual Anode Consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualAnodeConsumptionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF785Annual paste consumption. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualAnodePasteConsumptionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FF786Annual paste consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualAnodePasteConsumptionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
FUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
FFALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
FFALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
FFFF0001GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. This data element is located on tab 1, in column A2, and in row 30./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameghgrpIdSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0001AYou have not uploaded a reporting form file./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamejctSubPartFacilitySubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0001BFilename %file_name included in the Subpart FF reporting form, 4. Ventilation Quarterly tab has not been uploaded. File names cited in the reporting form should include file extension type (e.g., .xls, .xlsx, .doc, .docx, .png, .txt, .csv, .accdb, .mdb). Please return to the Subpart FF overview page to upload the cited MSHA report file or correct the file name listed on tab 4 in column A33./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamenoneSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0002Reporting Period. This data element is required and must be equal to the expected reporting year. This data element is located on tab 1, in column A2, and in row 31./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamereportingPeriodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0006Quarter(s) [{1}]: Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. This data element is located on tab 1 in column B3, and in row 37./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNametransientData['qrtCO2']Subpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0023Degasification Gas Collection System Unit ID or Name. This data element is required only if a degasification system is used. Leave this field blank if the facility does not have a degasification system. This data element is located on tab 2 in column A1./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedegasCollectionSystemUnitIDSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0028The same name or Gas Collection System Unit ID already exists. Please enter a unique name or identifier. This data element is located on tab 2 in column A1./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedegasCollectionSystemUnitIDSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0036Identify if this is a well or a shaft. This data element is required. This data element is located on tab 3 in column A2./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameisThisWellorShaftSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0039Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point. This data element is required. This data element is located on tab 3 in column A9./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamewellShaftMonitoredStatusSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0040Identify the Centralized Monitoring Point. This data element is required. This data element is located on tab 3 in column A10./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamecentralizedMonitoringPointIDSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0041Degasification Gas Collection System Unit ID or Name. This data element is required. This data element is located on tab 3 in column A3./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamegasSystemUnitIDSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0050Method used for flow rate. This data element is required. This data element is located on tab 4 in column A5./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemethodforFlowRateSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0086Quarterly CH4 concentration. This data element is required. This data element is located on tab 4 in column A14. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamequarterlyCH4ConcentrationUsedInEquationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0087Temperature used in Eq. FF-1. This data element is required. If a flow meter that automatically corrects to 520 degrees Rankine was used, enter 520. This data element is located on Tab 4 in column A22./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNametemperatureUsedInEquationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0088Pressure used in Eq. FF-1. This data element is required. If a flow meter that automatically corrects to 1 atm was used or if you used MSHA-provided data of actual methane flow, please enter 1. This data element is located on tab 4 in column A24./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamepressureUsedInEquationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0090Quarterly volumetric flow rate used in Eq. FF-1. This data element is required. This data element is located on tab 4 in column A6. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamequarterlyVolumetricFlowRateUsedInEquationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0091Gaseous organic concentration correction factor used in Eq. FF-9. This data element is required if you indicated that Eq. FF-9 is required to calculate CH4 concentration. This data element is located on tab 4 in column A16./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamegaseousOrganicConcentrationCorrectionFactorSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0098Degasification Gas Collection System Monitoring Point. This data element is required only if a degasification system is used. Leave this field blank if the facility does not have a degasification system. This data element is located on tab 5 in column A1./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedeGasPointIdSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0106Method used for concentration. This data element is required if a degasification system is used. Leave this field blank if the facility does not have a degasification system. This data element is located on tab 5 in column A5./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemethodforDeGasConcSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0107Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems. This data element is required if the method used for concentration is Monitored using 98.324(c)(1). This data element is located on Tab 5 in column A6. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamequarterlyCH4ConcSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0120Gaseous organic concentration correction factor used in Eq. FF-9. This data element is required if Eq. FF-9 is required to calculate CH4 concentration. If Eq. FF-9 was not required, please change column A12 to \'No\' and leave this cell blank. This data element is located on tab 5 in column A13./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamegaseousOrganicConcentrationCorrectionFactorSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0121Temperature used in Eq. FF-3. This data element is required. If a flow meter that automatically corrects to 520 degrees Rankine was used, enter 520. This data element is located on Tab 5 in column A14./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNametemperatureUsedInEquationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0122Pressure used in Eq. FF-3. This data element is required. If a flow meter that automatically corrects to 1 atm was used, enter 1. This data element is located on tab 5 in column A16./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamepressureUsedInEqSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0124Was Eq. FF-9 required to calculate CH4 concentration?. This data element requires a yes or no response. This data element is located on tab 5 in column A12./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameequationRequiredToCalculateCH4ConcentrationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0134Degasification Gas Collection System Monitoring Point. This data element is required if a degasification system is in use. This data element is located on tab 6 in column A1./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedeGasWeeklyPointIdSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0137Method used for flow rate. This data element is required if a Degasification Gas Collection System Monitoring Point is listed. This data element is located on tab 6 in column A4./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedeGasWeeklyFlowrateMethodSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0140Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3. This data element is required if a Degasification Gas Collection System Monitoring Point is listed. This data element is located on tab 6 in column A5. Error Location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameweeklyVolumetricFlowRateSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0147Weekly CH4 liberated from the monitoring point (output of Eq. FF-3). This data element is required. This data element is located on tab 6 in column A10. Error Location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameweeklyCH4LiberatedFromAtTheMonitoringPointSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0148Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name. This data element is required. This data element is located on tab 7 in column A1./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedestructionDeviceIDSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0149Reporting destruction in a destruction device or offsite transport. This data element is required. This data element is located in the reporting form on Tab 7 in Column A2./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamereportingDestructionOnSiteorOffsiteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0150Description of the Device. This data element is required. This data element is located on tab 7 in column A3./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedeviceDescriptionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0151Additional Information for Description. This data element is required. Data element located on tab 7 in column A4./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameadditionalDescriptionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0152Indicate if a back-up destruction device (or devices) is present at the mine. This data element is required. This data element is located on tab 7 in column A5./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamebackupDestructionDevicePresenceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0153Annual operating hours of the primary destruction device, hours. This data element is required. This data element is located on tab 7 in column A6./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualOperatingHoursDestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0154Annual operating hours of the primary destruction device, hours. This data element is required. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A6./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualOperatingHoursDestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0155Annual operating hours of back-up destruction device Number 1. This data element is required. This data element is located on tab 7 in column A8./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualOperatingHoursBackup1DestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0156Annual operating hours of back-up destruction device Number 1. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A8./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameannualOperatingHoursBackup1DestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0158If gas is transported offsite, is the gas destroyed offsite? This data element is required. This data element is located on tab 7 in column A12./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamegasDestroyedOffsiteIndSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0159Destruction efficiency assumed for primary destruction device and used in Eq. FF-5. This data element is required. This data element is located on tab 7 in column A7./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedestructionEfficiencyAssumedForPrimaryDestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0160Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10). This data element is required. This data element is located on tab 7 in column A13./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameindividualWellShaftAssociatedWithOffsiteTransport1Subpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0161Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5. This data element is required if you indicated a back-up destruction device is present at the mine. This data element is located on tab 7 in column A9./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedestructionEfficiencyAssumedForBackUp1DestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0166Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5. This value should be within the range of 0 to 100. The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A11./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedestructionEfficiencyAssumedForBackUp2DestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0167Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5. This value should be within the range of 0 to 100. The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A9./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedestructionEfficiencyAssumedForBackUp1DestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0168Destruction efficiency assumed for primary destruction device and used in Eq. FF-5. This value should be within the range of 0 to 100. The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A7./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedestructionEfficiencyAssumedForPrimaryDestructionDeviceSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0178Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name. If no ventilation and degasification system destruction device or point of offsite transport exist, please leave column this table blank. This data element is located on Tab 8 in column A1. Error Location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamequarterlyDestructionDeviceIDSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0179Quarterly CH4 destroyed onsite. This data element is required if you indicated in the destruction or offsite tab that gas is destroyed at the mine. This data element is located on tab 8 in column A3. Error Location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamequarterlyCH4DestroyedOnsiteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0180Quarterly CH4 transported offsite. This data element is required if you indicated in the destruction or offsite tab that gas is transported offsite. This data element is located on tab 8 in column A4. Error Location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamequarterlyCH4TransportedOffsiteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0183Weekly volumetric flow rate used to calculate CH4 destruction. This data element is required if you are destroying gas at the mine or transporting it offsite. This data element is located on tab 9 in column A4. Error Location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameweeklyVolumetricFlowRateUsedToCalculateCH4DestructionSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0184Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name. This data element is required. This data element is located on Tab 9 in column A1. Error Location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameweeklyDestructionDeviceIDSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0193Weekly CH4 concentration used to calculate CH4 flow. This data element is required if you are destroying gas at the mine or transporting it offsite. This data element is located on tab 9 in column A7. Error Location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameweeklyCH4ConcentrationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0198Quarter(s) [{1}] : Facility total quarterly CH4 destroyed at the mine and transported offsite (CH4DestroyedTotal). This data element is required. This data element is on tab 10 in column C4./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNametotalQuarterlyCH4DestroyedAndTransportedOffsiteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0199Quarter(s) [{1}] : Facility total quarterly CH4 liberated from all degasification monitoring points (CH4DTotal). This data element is required. This data element is on tab 10 in column B4./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNametotalQuarterlyCH4LiberatedFromDegasificationMonitoringPointsSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0200Quarter(s) [{1}] : Facility total quarterly CH4 liberated from ventilation systems (CH4VTotal). This data element is required. This data element is on tab 10 in column A4./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNametotalQuarterlyCH4LiberatedFromVentilationSystemsSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0201Quarter(s) [{1}] : What result do you want to report to EPA? This data element is required. This data element is located on tab 10 in column A3./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameresultReportedToEPAVentilationSystemsSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0202Quarter(s) [{1}] : What result do you want to report to EPA? This data element is required. This data element is located on tab 10 in column B3./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameresultReportedToEPADegasificationMonitoringPointsSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0203Quarter(s) [{1}] : What result do you want to report to EPA? This data element is required. This data element is located on tab 10 in column C3./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameresultReportedToEPATransportedOffsiteSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0206Quarter(s) [{1}] : Facility total quarterly CH4 liberated from ventilation systems (CH4VTotal). This data element is required. This data element is on tab 10 in column A5./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameventilationSystemsReportedValueSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0207Quarter(s) [{1}] : Facility total quarterly CH4 liberated from all degasification monitoring points (CH4DTotal). This data element is required. This data element is on tab 10 in column B5./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedegasificationMonitoringPointsReportedValueSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0208Quarter(s) [{1}] : Facility total quarterly CH4 destroyed at the mine and transported offsite (CH4DDestroyedTotal). This data element is required. This data element is on tab 10 in column C5./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNametransportedOffsiteReportedValueSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0216Quarter(s) [{1}] : Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7(MT CH4, rounded). The quantity destroyed cannot exceed the quantity liberated. Please double check this value and revise this result. This data element is on tab 10 in column D5./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamefacilityTotalQuarterlyNetCH4EmissionsSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0219Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device. Each destruction device may have up to 10 discrete wells/shafts associated with it, but they must all be different. This data element is on tab 7 in columns A13 through A22/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameindividualWellShaftAssociatedWithOffsiteTransport1Subpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0221Start date of well or shaft. This data element is required. This data element is located on tab 3 in column A6. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamewellShaftStartDateSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0222End date of well or shaft. This data element is required. This data element is located on tab 3 in column A7. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamewellShaftEndDateSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0223Number of days the well or shaft was in operation during the reporting year. This data element is required. This data element is located on tab 3 in column A8. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamewellShaftDaysInOperationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0224Was a flow meter used? This data element is required. This data element is located on tab 4 in column A27. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamewasFlowMeterUsedSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0225File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate. This data element is required. This data element is located on tab 4 in column A33. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamefileNameMSHAReportUsedSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0226Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? This data element is required. This data element is located on Tab 5 in column A18. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamewereQuarterlyVentilationFlowRateMeasuredSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0227Was a flow meter used? This data element is required. This data element is located on Tab 5 in column A19. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamewasFlowMeterUsedSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0230Moisture content used in Eq. FF-1. This data element is required when volumetric flow and CH4 concentration are measured on a different basis and and a flow meter is used but does not automatically correct for moisture content. This data element is located on tab 4 in column A28. If reported, the expected range for moisture content is between 0.0 and 0.1. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemoistureContentUsedInEquationSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0231Quarterly CH4 liberated (CH4V - output of Eq. FF-1). This data element is required. This data element is located on tab 4 in column A32. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamequarterlyCH4LiberatedFromVentilationMonitoringPointSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0233Required CH4 concentration from sampling. This data element is required if Method used for concentration selected is Monitored using 98.324(c)(2). This data element is located on Tab 5 in column A10. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamequarterlyCH4ConcentrationWeeklySubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0234Moisture content used in Eq. FF-3. This data element is required when the weekly volumetric flow rate and the quarterly CH4 concentration are measured on a different basis and when a flow meter does not automatically correct for moisture content. This data element is located on tab 5 in column A20. The expected range for moisture content is between 0.0 and 0.1. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemoistureContentUsedInEqSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0235Moisture correction factor used in Eq. FF-1. This data element is required. If you used MSHA-provided data of actual methane flow, if the flow rate and concentration are measured on the same wet/wet or dry/dry basis, or if a flow meter was used and automatically corrected for moisture content enter 1 for moisture correction factor. This data element is located on tab 4 in column A30. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemoistureCorrectionFactorSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0236Moisture correction factor used in Eq. FF-3. This data element is required. If the flow rate and concentration are measured on the same wet/wet or dry/dry basis or if a flow meter was used and automatically corrected for moisture content enter 1 for moisture correction factor. This data element is located in the reporting form on tab 5 in column A22. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamemoistureCorrectionFactorSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0239Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? This data element is required. This data element is located on tab 4 in column A26. Error location(s) [{1}]/GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamewereQuarterlyVentilationFlowRateMeasuredSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0240Start and stop dates where degasification of mining operations is taking place. These are required data elements. The data elements can be found on Tab 5 columns A3 and A4./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNamedeGasPointIdSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
FFFF0244Start and/or stop dates for CH4 liberated by ventilation monitoring points were not reported. Start and stop dates for ventilation monitoring points are required data elements. The data elements can be found on Tab 4 columns A3 and A4./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitNameactiveVentilationStartDateSubpart D must include at least one <UnitsCDetails> node with a <UnitName>
GALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
GALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
GCEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
GCEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
GCEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
GCML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
GCML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
GCML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
GCML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
GCML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
GCML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
GCML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
GCML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
GCML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
GCML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
GCML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
GCML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
GCML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
GCML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
GCML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
GCML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
GCML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
GCML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
GCML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
GCML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
GCML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
GCML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
GCML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
GCML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
GCML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
GCML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
GCML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
GCML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
GCML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
GCML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
GCML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
GCML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
GCML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
GCML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
GCML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
GCML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
GCML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
GCML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
GG-EU-1You have selected Subpart G for reporting, but you have not yet added a unit. nounits 
GG001Annual urea production. This data element is required. annualUreaProduction 
GG002Annual urea production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualUreaProduction 
GG004Method used to determine urea production. This data element is required. ureaCalculationMethod 
GG005Method used to determine urea production. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ureaCalculationMethodDesc 
GG006Quantity of CO2 used to produce urea from the steam reforming of a hydrocarbon or the gasification of solid and liquid raw material. This data element is required. You may enter zero if your facility does not produce urea. co2ConsumedForUrea 
GG007Quantity of CO2 used to produce urea from the steam reforming of a hydrocarbon or the gasification of solid and liquid raw material. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2ConsumedForUrea 
GG009Method used to determine the quantity of CO2 used to produce urea. This data element is required. co2CalculationForUreaMethod 
GG010Method used to determine the quantity of CO2 used to produce urea. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. co2CalculationForUreaMethodDesc 
GG011Please make a selection or click CANCEL. hasCEMS 
GG012Type of feedstock used by this unit. This data element is required. Please make a selection or click CANCEL. feedStockType 
GG015Method used to determine feedstock mass for January. This data element is required. quantityMap['January'].feedStockQuantityMethod 
GG016Method used to determine feedstock mass for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['January'].otherFeedStockMethodDesc 
GG017Method used to determine feedstock mass for February. This data element is required. quantityMap['February'].feedStockQuantityMethod 
GG018Method used to determine feedstock mass for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['February'].otherFeedStockMethodDesc 
GG019Method used to determine feedstock mass for March. This data element is required. quantityMap['March'].feedStockQuantityMethod 
GG020Method used to determine feedstock mass for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['March'].otherFeedStockMethodDesc 
GG021Method used to determine feedstock mass for April. This data element is required. quantityMap['April'].feedStockQuantityMethod 
GG022Method used to determine feedstock mass for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['April'].otherFeedStockMethodDesc 
GG023Method used to determine feedstock mass for May. This data element is required. quantityMap['May'].feedStockQuantityMethod 
GG024Method used to determine feedstock mass for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['May'].otherFeedStockMethodDesc 
GG025Method used to determine feedstock mass for June. This data element is required. quantityMap['June'].feedStockQuantityMethod 
GG026Method used to determine feedstock mass for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['June'].otherFeedStockMethodDesc 
GG027Method used to determine feedstock mass for July. This data element is required. quantityMap['July'].feedStockQuantityMethod 
GG028Method used to determine feedstock mass for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['July'].otherFeedStockMethodDesc 
GG029Method used to determine feedstock mass for August. This data element is required. quantityMap['August'].feedStockQuantityMethod 
GG030Method used to determine feedstock mass for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['August'].otherFeedStockMethodDesc 
GG031Method used to determine feedstock mass for September. This data element is required. quantityMap['September'].feedStockQuantityMethod 
GG032Method used to determine feedstock mass for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['September'].otherFeedStockMethodDesc 
GG033Method used to determine feedstock mass for October. This data element is required. quantityMap['October'].feedStockQuantityMethod 
GG034Method used to determine feedstock mass for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['October'].otherFeedStockMethodDesc 
GG035Method used to determine feedstock mass for November. This data element is required. quantityMap['November'].feedStockQuantityMethod 
GG036Method used to determine feedstock mass for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['November'].otherFeedStockMethodDesc 
GG037Method used to determine feedstock mass for December. This data element is required. quantityMap['December'].feedStockQuantityMethod 
GG038Method used to determine feedstock mass for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['December'].otherFeedStockMethodDesc 
GG039Basis for the solid feedstock carbon content for January. This data element is required. ccMap['January'].carbonContentBasis 
GG040Basis for the solid feedstock carbon content for February. This data element is required. ccMap['February'].carbonContentBasis 
GG041Basis for the solid feedstock carbon content for March. This data element is required. ccMap['March'].carbonContentBasis 
GG042Basis for the solid feedstock carbon content for April. This data element is required. ccMap['April'].carbonContentBasis 
GG043Basis for the solid feedstock carbon content for May. This data element is required. ccMap['May'].carbonContentBasis 
GG044Basis for the solid feedstock carbon content for June. This data element is required. ccMap['June'].carbonContentBasis 
GG045Basis for the solid feedstock carbon content for July. This data element is required. ccMap['July'].carbonContentBasis 
GG046Basis for the solid feedstock carbon content for August. This data element is required. ccMap['August'].carbonContentBasis 
GG047Basis for the solid feedstock carbon content for September. This data element is required. ccMap['September'].carbonContentBasis 
GG048Basis for the solid feedstock carbon content for October. This data element is required. ccMap['October'].carbonContentBasis 
GG049Basis for the solid feedstock carbon content for November. This data element is required. ccMap['November'].carbonContentBasis 
GG050Basis for the solid feedstock carbon content for December. This data element is required. ccMap['December'].carbonContentBasis 
GG051Method used to determine feedstock volume for January. This data element is required. quantityMap['January'].feedStockQuantityMethod 
GG052Method used to determine feedstock volume for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['January'].otherFeedStockMethodDesc 
GG053Method used to determine feedstock volume for February. This data element is required. quantityMap['February'].feedStockQuantityMethod 
GG054Method used to determine feedstock volume for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['February'].otherFeedStockMethodDesc 
GG055Method used to determine feedstock volume for March. This data element is required. quantityMap['March'].feedStockQuantityMethod 
GG056Method used to determine feedstock volume for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['March'].otherFeedStockMethodDesc 
GG057Method used to determine feedstock volume for April. This data element is required. quantityMap['April'].feedStockQuantityMethod 
GG058Method used to determine feedstock volume for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['April'].otherFeedStockMethodDesc 
GG059Method used to determine feedstock volume for May. This data element is required. quantityMap['May'].feedStockQuantityMethod 
GG060Method used to determine feedstock volume for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['May'].otherFeedStockMethodDesc 
GG061Method used to determine feedstock volume for June. This data element is required. quantityMap['June'].feedStockQuantityMethod 
GG062Method used to determine feedstock volume for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['June'].otherFeedStockMethodDesc 
GG063Method used to determine feedstock volume for July. This data element is required. quantityMap['July'].feedStockQuantityMethod 
GG064Method used to determine feedstock volume for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['July'].otherFeedStockMethodDesc 
GG065Method used to determine feedstock volume for August. This data element is required. quantityMap['August'].feedStockQuantityMethod 
GG066Method used to determine feedstock volume for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['August'].otherFeedStockMethodDesc 
GG067Method used to determine feedstock volume for September. This data element is required. quantityMap['September'].feedStockQuantityMethod 
GG068Method used to determine feedstock volume for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['September'].otherFeedStockMethodDesc 
GG069Method used to determine feedstock volume for October. This data element is required. quantityMap['October'].feedStockQuantityMethod 
GG070Method used to determine feedstock volume for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['October'].otherFeedStockMethodDesc 
GG071Method used to determine feedstock volume for November. This data element is required. quantityMap['November'].feedStockQuantityMethod 
GG072Method used to determine feedstock volume for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['November'].otherFeedStockMethodDesc 
GG073Method used to determine feedstock volume for December. This data element is required. quantityMap['December'].feedStockQuantityMethod 
GG074Method used to determine feedstock volume for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['December'].otherFeedStockMethodDesc 
GG075Basis for the liquid feedstock carbon content for January. This data element is required. ccMap['January'].carbonContentBasis 
GG076Basis for the liquid feedstock carbon content for February. This data element is required. ccMap['February'].carbonContentBasis 
GG077Basis for the liquid feedstock carbon content for March. This data element is required. ccMap['March'].carbonContentBasis 
GG078Basis for the liquid feedstock carbon content for April. This data element is required. ccMap['April'].carbonContentBasis 
GG079Basis for the liquid feedstock carbon content for May. This data element is required. ccMap['May'].carbonContentBasis 
GG080Basis for the liquid feedstock carbon content for June. This data element is required. ccMap['June'].carbonContentBasis 
GG081Basis for the liquid feedstock carbon content for July. This data element is required. ccMap['July'].carbonContentBasis 
GG082Basis for the liquid feedstock carbon content for August. This data element is required. ccMap['August'].carbonContentBasis 
GG083Basis for the liquid feedstock carbon content for September. This data element is required. ccMap['September'].carbonContentBasis 
GG084Basis for the liquid feedstock carbon content for October. This data element is required. ccMap['October'].carbonContentBasis 
GG085Basis for the liquid feedstock carbon content for November. This data element is required. ccMap['November'].carbonContentBasis 
GG086Basis for the liquid feedstock carbon content for December. This data element is required. ccMap['December'].carbonContentBasis 
GG087Method used to determine feedstock volume for January. This data element is required. quantityMap['January'].feedStockQuantityMethod 
GG088Method used to determine feedstock volume for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['January'].otherFeedStockMethodDesc 
GG089Method used to determine feedstock volume for February. This data element is required. quantityMap['February'].feedStockQuantityMethod 
GG090Method used to determine feedstock volume for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['February'].otherFeedStockMethodDesc 
GG091Method used to determine feedstock volume for March. This data element is required. quantityMap['March'].feedStockQuantityMethod 
GG092Method used to determine feedstock volume for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['March'].otherFeedStockMethodDesc 
GG093Method used to determine feedstock volume for April. This data element is required. quantityMap['April'].feedStockQuantityMethod 
GG094Method used to determine feedstock volume for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['April'].otherFeedStockMethodDesc 
GG095Method used to determine feedstock volume for May. This data element is required. quantityMap['May'].feedStockQuantityMethod 
GG096Method used to determine feedstock volume for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['May'].otherFeedStockMethodDesc 
GG097Method used to determine feedstock volume for June. This data element is required. quantityMap['June'].feedStockQuantityMethod 
GG098Method used to determine feedstock volume for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['June'].otherFeedStockMethodDesc 
GG099Method used to determine feedstock volume for July. This data element is required. quantityMap['July'].feedStockQuantityMethod 
GG100Method used to determine feedstock volume for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['July'].otherFeedStockMethodDesc 
GG101Method used to determine feedstock volume for August. This data element is required. quantityMap['August'].feedStockQuantityMethod 
GG102Method used to determine feedstock volume for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['August'].otherFeedStockMethodDesc 
GG103Method used to determine feedstock volume for September. This data element is required. quantityMap['September'].feedStockQuantityMethod 
GG104Method used to determine feedstock volume for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['September'].otherFeedStockMethodDesc 
GG105Method used to determine feedstock volume for October. This data element is required. quantityMap['October'].feedStockQuantityMethod 
GG106Method used to determine feedstock volume for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['October'].otherFeedStockMethodDesc 
GG107Method used to determine feedstock volume for November. This data element is required. quantityMap['November'].feedStockQuantityMethod 
GG108Method used to determine feedstock volume for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['November'].otherFeedStockMethodDesc 
GG109Method used to determine feedstock volume for December. This data element is required. quantityMap['December'].feedStockQuantityMethod 
GG110Method used to determine feedstock volume for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['December'].otherFeedStockMethodDesc 
GG111Basis for the gaseous feedstock carbon content for January. This data element is required. ccMap['January'].carbonContentBasis 
GG112Basis for the gaseous feedstock carbon content for February. This data element is required. ccMap['February'].carbonContentBasis 
GG113Basis for the gaseous feedstock carbon content for March. This data element is required. ccMap['March'].carbonContentBasis 
GG114Basis for the gaseous feedstock carbon content for April. This data element is required. ccMap['April'].carbonContentBasis 
GG115Basis for the gaseous feedstock carbon content for May. This data element is required. ccMap['May'].carbonContentBasis 
GG116Basis for the gaseous feedstock carbon content for June. This data element is required. ccMap['June'].carbonContentBasis 
GG117Basis for the gaseous feedstock carbon content for July. This data element is required. ccMap['July'].carbonContentBasis 
GG118Basis for the gaseous feedstock carbon content for August. This data element is required. ccMap['August'].carbonContentBasis 
GG119Basis for the gaseous feedstock carbon content for September. This data element is required. ccMap['September'].carbonContentBasis 
GG120Basis for the gaseous feedstock carbon content for October. This data element is required. ccMap['October'].carbonContentBasis 
GG121Basis for the gaseous feedstock carbon content for November. This data element is required. ccMap['November'].carbonContentBasis 
GG122Basis for the gaseous feedstock carbon content for December. This data element is required. ccMap['December'].carbonContentBasis 
GG123Measured carbon content from sample analysis for solid feedstock. This data element is required. carbonContentMeasured 
GG124Measured carbon content from sample analysis for solid feedstock. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContentMeasured 
GG125Measured carbon content from sample analysis for solid feedstock. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (kg C per kg of feedstock). The value you provided is outside that range. You must correct the current value before continuing. carbonContentMeasured 
GG127Measured carbon content from sample analysis for liquid feedstock. This data element is required. carbonContentMeasured 
GG128Measured carbon content from sample analysis for liquid feedstock. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (kg C per kg of feedstock). The value you provided is outside that range. You must correct the current value before continuing. carbonContentMeasured 
GG129Measured carbon content from sample analysis for liquid feedstock. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContentMeasured 
GG130Measured carbon content from sample analysis for gaseous feedstock. This data element is required. carbonContentMeasured 
GG131Measured carbon content from sample analysis for gaseous feedstock. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContentMeasured 
GG132Measured carbon content from sample analysis for gaseous feedstock. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (kg C per kg of feedstock). The value you provided is outside that range. You must correct the current value before continuing. carbonContentMeasured 
GG137Method used to determine the gaseous feedstock quantity. This data element is required. gaseousFeedStockQuantityMethod 
GG138Method used to determine the liquid feedstock quantity. This data element is required. liquidFeedStockQuantityMethod 
GG139Method used to determine the solid feedstock quantity. This data element is required. solidFeedStockQuantityMethod 
GG140Gaseous feedstock quantity. This data element is required. gaseousFeedStockQuantity 
GG141Liquid feedstock quantity. This data element is required. liquidFeedStockQuantity 
GG142Solid feedstock quantity. This data element is required. solidFeedStockQuantity 
GG143Method used to determine the gaseous feedstock quantity. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherGaseousFeedStockQuantityMethod 
GG144Method used to determine the liquid feedstock quantity. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherLiquidFeedStockQuantityMethod 
GG145Method used to determine the solid feedstock quantity. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherSolidFeedStockQuantityMethod 
GUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
GUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
GGCEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
GGCEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
GGCEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
GGCML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
GGCML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
GGCML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
GGCML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
GGCML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
GGCML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
GGCML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
GGCML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
GGCML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
GGCML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
GGCML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
GGCML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
GGCML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
GGCML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
GGCML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
GGCML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
GGCML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
GGCML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
GGCML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
GGCML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
GGCML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
GGCML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
GGCML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
GGCML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
GGCML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
GGCML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
GGCML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
GGCML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
GGCML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
GGCML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
GGCML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
GGCML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
GGCML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
GGCML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
GGCML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
GGCML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
GGCML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
GGCML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
GGGG-EU-1You have added Subpart GG, but have not yet added a kiln or furnace. nounits 
GGGG006Annual zinc production capacity. This data is required. annualZincProductionCapacity 
GGGG007Annual zinc production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualZincProductionCapacity 
GGGG009Number of waelz kilns. This data element is required. numberOfWaelzKilns 
GGGG010Number of eletrothermic furnaces. This data element is required. numberOfElectrothermicFurnaces 
GGGG011Zinc Product. This data element for row(s) [{1}] is required when its row is checked. transientData['zincProductName'] 
GGGG012Annual Production of the Product. You must enter a value that is greater than or equal to zero for row(s) [{1}]. You must correct the current value before continuing. transientData['annualProductionQuantity'] 
GGGG030-1Unit Name (Unique Name Identifier). This data element is required. Please enter the required data or click CANCEL. unitNameIdentifier 
GGGG030-2Unit Name (Unique Name Identifier). This data element is required. Please enter the required data or click CANCEL. unitNameIdentifier 
GGGG031-1Unit Type. This data element is required and must be either \'Waelz Kiln\' or \'Electrothermic Furnace \'. Please enter the required data or click CANCEL. unitType 
GGGG031-2Unit Type. This data element is required and must be either \'Waelz Kiln\' or \'Electrothermic Furnace \'. Please enter the required data or click CANCEL. unitType 
GGGG032You have added a kiln or furnace, but have not yet added an Input Material. subpartGGCarbonContainingInputMaterialMap 
GGGG043Enter Own result for Annual CO2 process emissions from Waelz Kiln or Electrothermic furnace. This data element is required if you select Enter/Report Alternate Result. annualCo2ProcessEmissions 
GGGG050Input Material. This data element is required and must be either \'Zinc-bearing material\', \'Flux material\', or \'Carbonaceous materials\'. inputMaterialNameType 
GGGG051Input Material. This data element is required and must be either \'Zinc-bearing material\', \'Flux material\', \'Carbon electrode\' or \'Carbonaceous materials\'. inputMaterialNameType 
GGGG052Number of months missing data procedures were followed to determine the monthly mass of the material. You must enter a value that is greater than or equal to zero and less than or equal to twelve. You must correct the current value before continuing. numberOfMonthsMonthlyMassMaterial 
GGGG053Number of months missing data procedures were followed to repeat the test to determine the carbon content. You must enter a value that is greater than or equal to zero and less than or equal to twelve. You must correct the current value before continuing. numberOfMonthsTestCarbonContent 
GGGG054Procedure used to develop substitute data for the monthly mass of the carbon containing input material. This data element is required. procedureMonthlyMassOfCarbonInputMaterial 
GGGG055Test method used for the carbon content analysis. This data element is required. testMethodForCarbonContentAnalysis 
GGGG056Number of months missing data procedures were followed to determine the monthly mass of the material. This data element is required. numberOfMonthsMonthlyMassMaterial 
GGGG057Number of months missing data procedures were followed to repeat the test to determine the carbon content. This data element is required. numberOfMonthsTestCarbonContent 
GGGG100Zinc products produced. At least one row must be checked. zincProductsProduced 
GGGG101Annual Production of the Product. This data element for row(s) [{1}] is required when its row is checked. transientData['annualProductionQuantity'] 
GGGG301You need to save a Unit before you can add an Carbon-Containing Input Material. subpartGroupUnitId 
GGGG302You have added a process (kiln / furnace) line, but have not yet added an Input Material. Please use the Add an Input Material link to add at least one input for this process line, or click CANCEL. subpartGGCarbonContainingInputMaterialMap[1] 
HCEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
HCEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
HCEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
HCML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
HCML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
HCML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
HCML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
HCML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
HCML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
HCML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
HCML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
HCML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
HCML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
HCML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
HCML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
HCML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
HCML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
HCML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
HCML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
HCML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
HCML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
HCML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
HCML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
HCML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
HCML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
HCML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
HCML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
HCML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
HCML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
HCML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
HCML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
HCML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
HCML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
HCML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
HCML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
HCML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
HCML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
HCML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
HCML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
HCML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
HCML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
HH004Please make a selection or click CANCEL. hasCEMS 
HH005Please make a selection or click CANCEL. isCo2EmissionsBasedonRMconsumption 
HH006Annual cement production for the facility. This data element is required. annualCementProdcution 
HH007Annual cement production for the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualCementProdcution 
HH009Raw material name or description. This data element is required. Please enter the required data or click CANCEL. rmNameOrDescription 
HH010Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. This data element is required. numOfMonthsMDP_quantity 
HH011Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. The value must be a number between 0 through 12 months. The value you provided is outside that range. You must correct the current value before continuing. numOfMonthsMDP_quantity 
HH012Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This data element is required. numOfTimesMDP_carbonContent 
HH013Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfTimesMDP_carbonContent 
HH013aNumber of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This value must be either zero or 1. The value you provided is outside that range. You must correct the current value before continuing. numOfTimesMDP_carbonContent 
HH014Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. This data element is required. numOfMonthsMDP_quantity 
HH015Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. The value must be a number between 0 through 12 months. The value you provided is outside that range. You must correct the current value before continuing. numOfMonthsMDP_quantity 
HH016Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This data element is required. numOfTimesMDP_carbonContent 
HH017Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfTimesMDP_carbonContent 
HH017aNumber of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This value must be either zero or 1. The value you provided is outside that range. You must correct the current value before continuing. numOfTimesMDP_carbonContent 
HH018Because you have elected to estimate carbon dioxide emissions from raw material consumption based on consumption of individual materials, you must identify each raw material consumed in the kiln. You have not identified any raw materials consumed in this kiln. rawMaterialsList 
HH035Method used to determine clinker production for January. This data element is required. clinkerDataMap['January'].method_clinkerProduction 
HH036Method used to determine clinker production for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['January'].method_clinkerProduction_Other 
HH037Method used to determine the fraction of non-calcined CaO in clinker for January. This data element is required. clinkerDataMap['January'].method_frNonCalinedCao 
HH038Method used to determine the fraction of non-calcined MgO in clinker for January. This data element is required. clinkerDataMap['January'].method_frNonCalinedMgo 
HH039Method used to determine clinker production for February. This data element is required. clinkerDataMap['February'].method_clinkerProduction 
HH040Method used to determine clinker production for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['February'].method_clinkerProduction_Other 
HH041Method used to determine the fraction of non-calcined CaO in clinker for February. This data element is required. clinkerDataMap['February'].method_frNonCalinedCao 
HH042Method used to determine the fraction of non-calcined MgO in clinker for February. This data element is required. clinkerDataMap['February'].method_frNonCalinedMgo 
HH043Method used to determine clinker production for March. This data element is required. clinkerDataMap['March'].method_clinkerProduction 
HH044Method used to determine clinker production for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['March'].method_clinkerProduction_Other 
HH045Method used to determine the fraction of non-calcined CaO in clinker for March. This data element is required. clinkerDataMap['March'].method_frNonCalinedCao 
HH046Method used to determine the fraction of non-calcined MgO in clinker for March. This data element is required. clinkerDataMap['March'].method_frNonCalinedMgo 
HH047Method used to determine clinker production for April. This data element is required. clinkerDataMap['April'].method_clinkerProduction 
HH048Method used to determine clinker production for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['April'].method_clinkerProduction_Other 
HH049Method used to determine the fraction of non-calcined CaO in clinker for April. This data element is required. clinkerDataMap['April'].method_frNonCalinedCao 
HH050Method used to determine the fraction of non-calcined MgO in clinker for April. This data element is required. clinkerDataMap['April'].method_frNonCalinedMgo 
HH051Method used to determine clinker production for May. This data element is required. clinkerDataMap['May'].method_clinkerProduction 
HH052Method used to determine clinker production for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['May'].method_clinkerProduction_Other 
HH053Method used to determine the fraction of non-calcined CaO in clinker for May. This data element is required. clinkerDataMap['May'].method_frNonCalinedCao 
HH054Method used to determine the fraction of non-calcined MgO in clinker for May. This data element is required. clinkerDataMap['May'].method_frNonCalinedMgo 
HH055Method used to determine clinker production for June. This data element is required. clinkerDataMap['June'].method_clinkerProduction 
HH056Method used to determine clinker production for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['June'].method_clinkerProduction_Other 
HH057Method used to determine the fraction of non-calcined CaO in clinker for June. This data element is required. clinkerDataMap['June'].method_frNonCalinedCao 
HH058Method used to determine the fraction of non-calcined MgO in clinker for June. This data element is required. clinkerDataMap['June'].method_frNonCalinedMgo 
HH059Method used to determine clinker production for July. This data element is required. clinkerDataMap['July'].method_clinkerProduction 
HH060Method used to determine clinker production for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['July'].method_clinkerProduction_Other 
HH061Method used to determine the fraction of non-calcined CaO in clinker for July. This data element is required. clinkerDataMap['July'].method_frNonCalinedCao 
HH062Method used to determine the fraction of non-calcined MgO in clinker for July. This data element is required. clinkerDataMap['July'].method_frNonCalinedMgo 
HH063Method used to determine clinker production for August. This data element is required. clinkerDataMap['August'].method_clinkerProduction 
HH064Method used to determine clinker production for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['August'].method_clinkerProduction_Other 
HH065Method used to determine the fraction of non-calcined CaO in clinker for August. This data element is required. clinkerDataMap['August'].method_frNonCalinedCao 
HH066Method used to determine the fraction of non-calcined MgO in clinker for August. This data element is required. clinkerDataMap['August'].method_frNonCalinedMgo 
HH067Method used to determine clinker production for September. This data element is required. clinkerDataMap['September'].method_clinkerProduction 
HH068Method used to determine clinker production for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['September'].method_clinkerProduction_Other 
HH069Method used to determine the fraction of non-calcined CaO in clinker for September. This data element is required. clinkerDataMap['September'].method_frNonCalinedCao 
HH070Method used to determine the fraction of non-calcined MgO in clinker for September. This data element is required. clinkerDataMap['September'].method_frNonCalinedMgo 
HH071Method used to determine clinker production for October. This data element is required. clinkerDataMap['October'].method_clinkerProduction 
HH072Method used to determine clinker production for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['October'].method_clinkerProduction_Other 
HH073Method used to determine the fraction of non-calcined CaO in clinker for October. This data element is required. clinkerDataMap['October'].method_frNonCalinedCao 
HH074Method used to determine the fraction of non-calcined MgO in clinker for October. This data element is required. clinkerDataMap['October'].method_frNonCalinedMgo 
HH075Method used to determine clinker production for November. This data element is required. clinkerDataMap['November'].method_clinkerProduction 
HH076Method used to determine clinker production for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['November'].method_clinkerProduction_Other 
HH077Method used to determine the fraction of non-calcined CaO in clinker for November. This data element is required. clinkerDataMap['November'].method_frNonCalinedCao 
HH078Method used to determine the fraction of non-calcined MgO in clinker for November. This data element is required. clinkerDataMap['November'].method_frNonCalinedMgo 
HH079Method used to determine clinker production for December. This data element is required. clinkerDataMap['December'].method_clinkerProduction 
HH080Method used to determine clinker production for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['December'].method_clinkerProduction_Other 
HH081Method used to determine the fraction of non-calcined CaO in clinker for December. This data element is required. clinkerDataMap['December'].method_frNonCalinedCao 
HH082Method used to determine the fraction of non-calcined MgO in clinker for December. This data element is required. clinkerDataMap['December'].method_frNonCalinedMgo 
HH083Number of kilns. This data element is required. numberOfKilns 
HH084Number of kilns. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfKilns 
HH086Number of operating kilns. This data element is required. numberOfOperatingKilns 
HH087Number of operating kilns. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfOperatingKilns 
HH088aNumber of operating kilns. The number of operating kilns should be equal to or less than the total number of kilns. Please double check this value and revise. numberOfOperatingKilns 
HH089Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in [{1}]. This data element is required. method_frOfNonCalcinedCao 
HH090Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in [{1}]. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. method_frOfNonCalcinedCao_Other 
HH091Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in [{1}]. This data element is required. method_frOfNonCalcinedMgo 
HH092Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in [{1}]. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. method_frOfNonCalcinedMgo_Other 
HH200Clinker Production used for January. This data element is required. monthlyCemsDataMap['January'].clinkerProduction 
HH202Clinker Production used for February. This data element is required. monthlyCemsDataMap['February'].clinkerProduction 
HH204Clinker Production used for March. This data element is required. monthlyCemsDataMap['March'].clinkerProduction 
HH206Clinker Production used for April. This data element is required. monthlyCemsDataMap['April'].clinkerProduction 
HH208Clinker Production used for May. This data element is required. monthlyCemsDataMap['May'].clinkerProduction 
HH210Clinker Production used for June. This data element is required. monthlyCemsDataMap['June'].clinkerProduction 
HH212Clinker Production used for July. This data element is required. monthlyCemsDataMap['July'].clinkerProduction 
HH214Clinker Production used for August. This data element is required. monthlyCemsDataMap['August'].clinkerProduction 
HH216Clinker Production used for September. This data element is required. monthlyCemsDataMap['September'].clinkerProduction 
HH218Clinker Production used for October. This data element is required. monthlyCemsDataMap['October'].clinkerProduction 
HH220Clinker Production used for November. This data element is required. monthlyCemsDataMap['November'].clinkerProduction 
HH222Clinker Production used for December. This data element is required. monthlyCemsDataMap['December'].clinkerProduction 
HH250You have selected Subpart H for reporting, but you have not yet added a kiln. groupUnit 
HH260Because you have indicated "Kiln specific feed-to-clinker ratio" as the method used to determine one or more month\'s clinker production, you should indicate that monthly kiln-specific clinker factors were used to determine monthly clinker product by selecting the check box at the top of Monthly Information page. clinkerDataMap['January'].method_clinkerProduction 
HH261Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for January. clinkerDataMap['January'].method_clinkerProduction 
HH262Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for February. clinkerDataMap['February'].method_clinkerProduction 
HH263Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for March. clinkerDataMap['March'].method_clinkerProduction 
HH264Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for April. clinkerDataMap['April'].method_clinkerProduction 
HH265Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for May. clinkerDataMap['May'].method_clinkerProduction 
HH266Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for June. clinkerDataMap['June'].method_clinkerProduction 
HH267Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for July. clinkerDataMap['July'].method_clinkerProduction 
HH268Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for August. clinkerDataMap['August'].method_clinkerProduction 
HH269Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for September. clinkerDataMap['September'].method_clinkerProduction 
HH270Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for October. clinkerDataMap['October'].method_clinkerProduction 
HH271Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for November. clinkerDataMap['November'].method_clinkerProduction 
HH272Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for December. clinkerDataMap['December'].method_clinkerProduction 
HRM-1The raw material name or description must be unique. Please enter a different name.  rawMaterial 
HUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
HUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
HHALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
HHALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
HHHH001Please indicate if the landfill is open or closed. isOpen 
HHHH002An indication that the landfill is open in the current reporting year has been made, but the estimated year of landfill closure has not been reported. Please enter the estimated year of landfill closure. esimatedClosureYear 
HHHH003The estimated year of landfill closure has not been reported or is invalid. You must enter a valid year that is greater than zero before continuing. esimatedClosureYear 
HHHH007An indication that the landfill was closed in the current reporting year has been made. However, the year in which the landfill stopped accepting waste for disposal has not been reported or is invalid. This is required per section 98.346(a). You must enter a valid year that is greater than 1960 before continuing. acceptWasteStoppedYear 
HHHH010Please indicate if scales were used to determine the annual waste quantity prior to the first year of emissions reporting. This data element is required. wereScalesUsed 
HHHH012An indication that one of the other methods (Method 1, 2, 3, or None) used to determine the historical annual waste disposal quantities has not been provided. This data element is required. wasteQunatityEstimationMethodUsed 
HHHH013Please enter the first (start) year scales were used to determine annual waste quantities prior to [currentReportingYear]. scalesUsedPeriodStartYear 
HHHH014The first (start) year scales were used to determine annual waste quantities prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. scalesUsedPeriodStartYear 
HHHH015Please enter the last (end) year scales were used to determine annual waste quantities prior to the first year of emissions reporting. scalesUsedPeriodEndYear 
HHHH016The last (end) year scales were used to determine annual waste quantities prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the value before continuing. scalesUsedPeriodEndYear 
HHHH017The last (end) year scales were used to determine annual waste quantities that you provided is before the first (start) year. Please correct the start and/or end year. scalesUsedPeriodStartYear 
HHHH018Method #1, #2, or #3 was indicated to have been used for one or more years prior to the first emissions reporting year, but the historical waste estimation method start year has not been provided. Please correct the end year or click CANCEL. estimationPeriodStartYear 
HHHH019The first (start) year the method selected was used to estimate historical annual waste quantities. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. estimationPeriodStartYear 
HHHH020Method #1, #2, or #3 was indicated to have been used for one or more years prior to the first emissions reporting year, but the historical waste estimation method end year has not been provided. Please correct the end year or click CANCEL. estimationPeriodEndYear 
HHHH021The last (end) year the method selected was used to estimate historical annual waste quantities. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. estimationPeriodEndYear 
HHHH022Method #1, #2, or #3 was indicated to have been used for one or more years prior to the first emissions reporting year, but the historical waste estimation method end year you provided is before the start year. Please correct the start and/or end year or click CANCEL. estimationPeriodEndYear 
HHHH023Reason for using the estimation method selected. This data element is required. reasonForEstimationMethod 
HHHH024Landfill capacity. This data element is required. landfillCapacity 
HHHH025Landfill capacity. You must enter a value that is greater than zero. You must correct the current value before continuing. landfillCapacity 
HHHH027An indication of whether passive vents and/or passive flares (vents or flares that are not considered part of the gas collection system) are present at the landfill has not been made. This data element is required per sections 98.346(h) and 98.346(i)(7). If this is indeed a substantive error, please correct the value and submit your report. If you believe it to be correct, please submit the value as is. hasPassiveVentsOrFlares 
HHHH032Please indicate if the landfill has a landfill gas collection system before continuing. hasLFGCollectionSystem 
HHHH034Capacity of the landfill gas collection system. An indication was made that your landfill has a landfill gas collection system, but the capacity of the landfill gas collection system has not been reported. This data element is required. gasCollectionSystem.systemCapacity 
HHHH0345An indication that a gas collection system is at your facility has been made, but a unique name or identifier for the landfill gas measurement location has not been provided. This data element is required. Please provide a name, or click CANCEL. name 
HHHH0349Annual operating hours for the landfill gas measurement location. The annual operating hours must be a number between zero and 8760 (or between zero and 8784 in a leap year). Please enter a valid number of operating hours, or click CANCEL. annualOperatingHours 
HHHH035Capacity of the landfill gas collection system. You must enter a value that is greater than zero. You must correct the current value before continuing. gasCollectionSystem.systemCapacity 
HHHH0350An indication that a gas collection system is at your facility has been made, but the operating hours for the landfill gas measurement location has not been provided. This data element is required. annualOperatingHours 
HHHH0358You have added a measurement location, but have not yet added a destruction device. If a destruction device is associated with this measurement location, but is located off-site, select the ADD a Destruction Device link and enter the total annual hours for the reporting year (8760 or 8784 if it is a leap year) and enter a value of 1 for destruction efficiency (DE). destructionDevices 
HHHH036An indication was made that your landfill has a landfill gas collection system, but the number of wells has not been reported. This data element is required. gasCollectionSystem.numberOfwells 
HHHH037Number of wells. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. gasCollectionSystem.numberOfwells 
HHHH0374Information regarding the Waste Type Details (percent by weight, DOC, and/or decay rate) for the years {1} have not been reported. Please address this critical error. Then you can return here to perform another final review and submit your report. data['dataMissingYears'] 
HHHH0375The tipping receipts start year of {1} is on or after the reporting year 2010. Please address this critical error. Then you can return here to perform another final review and submit your report. data['tippingReceiptsStartYear'] 
HHHH038The frequency of leachate circulation. This data element is required. leachateCirculationFrequency 
HHHH039The surface area of the landfill containing waste is blank. This data element is required per 98.346(f). totalSurfaceAreaContainingWaste 
HHHH040The surface area of the landfill containing waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalSurfaceAreaContainingWaste 
HHHH042Please indicate if active aeration of waste in the landfill was conducted during the current reporting year, or click CANCEL isActiveAerationPerformed 
HHHH043Aeration blower capacity. This data element is required. blowerCapacity 
HHHH044Aeration blower capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. blowerCapacity 
HHHH046Fraction of the landfill containing waste affected by the aeration. This data element is required. fractionOfLandFillAffected 
HHHH047The fraction of the landfill containing waste affected by the aeration. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. fractionOfLandFillAffected 
HHHH049Total hours during the reporting year the aeration blower was operated. This data element is required. totlaBlowerOperatedHours 
HHHH050Total number of hours in the reporting year that the aeration blower was operated. The annual operating hours must be a number between zero and 8760 (or between zero and 8784 in a leap year). The value you provided is outside that range. You must correct the current value before continuing. totlaBlowerOperatedHours 
HHHH053Number of days substitute data was used to determine the waste quantity. This data element is required. numberOfDaysSubstituteUsed 
HHHH054Number of days substitute data was used to determine the waste quantity. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. numberOfDaysSubstituteUsed 
HHHH059A waste type group has been selected, but a waste type under each group that comprises the annual waste quantity has not been selected. This is a required field. Please go back and select a waste type under the waste group selected. wasteQuantityGroup 
HHHH060Methane generation, adjusted for oxidation, from the landfill in the reporting year. This data element is required. officialUnroundedModeledCh4Generation 
HHHH061Methane generation, adjusted for oxidation, from the landfill in the reporting year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation 
HHHH063-1The value reported for Equation HH-5 (methane generation, adjusted for oxidation) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation 
HHHH063-2The value reported for Equation HH-5 (methane generation, adjusted for oxidation) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation 
HHHH064-1The value for Equation HH-5 (methane generation, adjusted for oxidation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation 
HHHH064-2The value for Equation HH-5 (methane generation, adjusted for oxidation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation 
HHHH070The annual volume of landfill gas collected for destruction has not been reported. This data element is required. gasCollectionSystemDetails.annualVolume 
HHHH071The annual volume of landfill gas collected for destruction must be a value that is greater than or equal to zero. You must correct the current value before continuing. gasCollectionSystemDetails.annualVolume 
HHHH073Number of days substitute data procedure was used to determine the volume of landfill gas collected for destruction. This data element is required. gasCollectionSystemDetails.numberOfDaysSubDataUsedAnnualVolume 
HHHH074Number of days substitute data procedure was used to determine the volume of landfill gas collected for destruction. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. gasCollectionSystemDetails.numberOfDaysSubDataUsedAnnualVolume 
HHHH076The annual average methane concentration of landfill gas collected for destruction has not been reported. This data element is required. gasCollectionSystemDetails.annualAverageCh4Concentration 
HHHH077The annual average methane concentration of landfill gas collected for destruction must be reported as a percentage, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. gasCollectionSystemDetails.annualAverageCh4Concentration 
HHHH080If methane is monitored daily, the number of days substitute data was used to determine the annual average CH4 concentration of landfill gas collected for destruction. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. gasCollectionSystemDetails.numberOfDaysSubDataUsedAvgCh4Con 
HHHH083Was temperature incorporated into internal calculations run by the collection system\' monitoring equipment? This data element is required. gasCollectionSystemDetails.isTempIncorporated 
HHHH084Average monthly temperature at which flow is measured, for month(s) [{1}]. Because you have indicated that temperature is not incorporated into internal calculations run by the collection systems\' monitoring equipment this data element is required. averageTemperature 
HHHH096Was pressure incorporated into internal calculations run by the collection system\' monitoring equipment? This data element is required. gasCollectionSystemDetails.isPressureIncorporated 
HHHH097Average monthly pressure at which flow is measured, for month(s) [{1}]. Because you have indicated that pressure is not incorporated into internal calculations run by the collection systems\' monitoring equipment this data element is required. averagePressure 
HHHH109Was landfill gas flow measured on a wet or dry basis?. This data element is required. Please make a selection or click CANCEL. gasCollectionSystemDetails.isGasFlowWetBasis 
HHHH110Was CH4 concentration measured on a wet or dry basis?. This data element is required. Please make a selection or click CANCEL. gasCollectionSystemDetails.isCh4ConcentrationWetBasis 
HHHH111Average monthly moisture, for month(s) [{1}]. Because you have indicated that moisture is not incorporated into internal calculations run by the collection systems\' monitoring equipment this data element is required. averageMoistureContent 
HHHH111aAverage monthly moisture, for month(s) [{1}]. The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. averageMoistureContent 
HHHH123Depth of area with no waste in-place (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithNoWasteA1 
HHHH125The depth of area without active gas collection, regardless of cover type (A2) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithOutActiveGasCollectionA2 
HHHH126Depth of area without active gas collection, regardless of cover type (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithOutActiveGasCollectionA2 
HHHH128The depth of area with daily soil cover and active gas collection (A3) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithDailySoilCoverAndActiveGasA3 
HHHH129Depth of area with daily soil cover and active gas collection (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithDailySoilCoverAndActiveGasA3 
HHHH131The depth of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (area type A4 in Table HH-3) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithSoilCoverNotMeetingCriteriaA4 
HHHH132Depth of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithSoilCoverNotMeetingCriteriaA4 
HHHH134The depth of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (area type A5 in Table HH-3) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithSoilCover3FeetOrGeoCoverA5 
HHHH135Depth of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithSoilCover3FeetOrGeoCoverA5 
HHHH137A waste type group (Bulk Waste, Modified Bulk Waste, or Waste Composition) from Table HH-1 has not been selected. This is a required field. A waste type group must first be selected in order to select the waste type(s) disposed of at the landfill during the year. wasteQuantityGroup 
HHHH139Please indicate if tipping receipts or company records were used to determine waste disposal quantities prior to the first year of emissions reporting, or click CANCEL. wereTippingReceiptsUsed 
HHHH140An indication that tipping receipts were used to determine the annual waste quantities for years prior to the first emissions reporting year, but a start year for using tipping receipts has not been provided. This data element is required. tippingReceiptsStartYear 
HHHH141An indication that tipping receipts were used to determine the annual waste quantities for years prior to the first emissions reporting year, but the tipping receipts end year has not been reported. This data element is required. tippingReceiptsEndYear 
HHHH142An indication that tipping receipts were used to determine the annual waste quantities for years prior to the first emissions reporting year, but the tipping receipts end year provided is before the start year. Please correct the start and/or end year or click CANCEL. tippingReceiptsEndYear 
HHHH156Any additional description of the aeration system. This data element is required. additionalDescription 
HHHH157You have selected Subpart HH for reporting, but you have not yet completed the Landfill Details - Reporting Years page. isOpen 
HHHH165A type of cover material (organic, clay, sand, and/or other soil mixture) has not been reported for the landfill. This is required per section 98.346(f). organicCoverMaterialType 
HHHH181The surface area for A1 (area with no waste-in-place) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithNoWasteA1 
HHHH182The surface area of area with no waste in-place (A1) must be reported. You must enter a value that is greater than or equal to zero before continuing. If no waste is in place for this area type, enter a 0. surfaceAreaWithNoWasteA1 
HHHH184The surface area for A2 (area without active gas collection, regardless of cover type) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithOutActiveGasCollectionA2 
HHHH185The surface area of area without active gas collection, regardless of cover type (A2) has not been reported. You must enter a value that is greater than or equal to zero before continuing. If no waste is in place for this area type, enter a 0. surfaceAreaWithOutActiveGasCollectionA2 
HHHH187The surface area for A3 (area with daily soil cover and active gas collection) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithDailySoilCoverAndActiveGasA3 
HHHH188The surface area of area with daily soil cover and active gas collection (area type A3 in Table HH-3) must be reported. You must enter a value that is greater than or equal to zero before continuing. If no waste is in place for this area type, enter a 0. surfaceAreaWithDailySoilCoverAndActiveGasA3 
HHHH190The surface area of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (area type A4 in Table HH-3) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithSoilCoverNotMeetingCriteriaA4 
HHHH191The surface area of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (area type A4 in Table HH-3). You must enter a value that is greater than or equal to zero before continuing. surfaceAreaWithSoilCoverNotMeetingCriteriaA4 
HHHH193The surface area of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (area type A5 in Table HH-3) has not been reported. This data element is required even if the value to report is 0 square meters. Please double check and revise this value before submitting the report. surfaceAreaWithSoilCover3FeetOrGeoCoverA5 
HHHH194The surface area of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (area type A5 in Table HH-3) has not been reported. This data element is required even if the value to report is 0 square meters. Please double check and revise this value before submitting the report. surfaceAreaWithSoilCover3FeetOrGeoCoverA5 
HHHH196The percent by weight for the waste type selected has not been reported. This is a required field and must be expressed as a decimal fraction. Please go back and enter this value. percentByWeight 
HHHH197Percent by weight for waste type, expressed as a decimal fraction. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click Cancel. percentByWeight 
HHHH199The value for the degradable organic carbon (DOC), expressed as a decimal fraction, has not been reported. This is a required field. doc 
HHHH200The value reported for the degradable organic carbon (DOC), expressed as a decimal fraction, must be a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click Cancel. doc 
HHHH202A value for the decay rate (k) has not been reported. This is a required field. decayRate 
HHHH203The value reported for the decay rate (k) must be a value that is greater than or equal to zero. You must correct the current value before continuing, or click Cancel. decayRate 
HHHH211Please indicate if working capacities were used to determine the annual waste quantity prior to [currentReportingYear]. This data element is required. wasWorkingCapacityMethodUsed 
HHHH212An indication that working capacity was used to determine the annual total waste disposal quantity for one or more years, but the working capacities period start year has not been provided. Please correct the start year or click CANCEL. workingCapacityStartYear 
HHHH213An indication was made that working capacity was used to determine the annual total waste disposal quantity for one or more years, but the working capacities period end year has not been provided. Please correct the end year or click CANCEL. workingCapacityEndYear 
HHHH214An indication was made that working capacity was used to determine the annual total waste disposal quantity for one or more years, but the working capacities period end year you provided is before the start year. Please correct the start and/or end year or click CANCEL. workingCapacityEndYear 
HHHH215An indication that the landfill was closed in the current reporting year has been made. However, the year in which the landfill stopped accepting waste for disposal that you have reported is after the current reporting year. Please enter a valid year in which the landfill stopped accepting waste for disposal, or change the landfill open/closed indication. acceptWasteStartYear 
HHHH216First year the landfill accepted waste. You must enter a valid year for the first year the landfill accepted waste that is greater than zero. You must correct the current value before continuing. acceptWasteStartYear 
HHHH218You have indicated that scales were used to determine the annual waste quantity in the year, but you have not provided the quantity (metric tons). This data element is required. methodsUsedAndQuantity 
HHHH219You have indicated that working capacities were used to determine the annual waste quantity in the year, but you have not provided the quantity (metric tons). This data element is required. methodsUsedAndQuantity 
HHHH220You have indicated that methods other than scales or working capacities were used to determine the annual waste quantity in the year, but you have not provided the quantity (metric tons). This data element is required. methodsUsedAndQuantity 
HHHH221An indication was made that scales were used to determine the annual waste disposal quantities for one or more of the years prior to the first emissions reporting year, but the waste quantities themselves have not been reported. This data element is required. methodsUsedAndQuantity 
HHHH222An indication that the method of working capacity was used for one or more years to determine the total annual waste disposal quantity in metric tons for one or more years prior to the first emissions reporting year. However, the total total annual waste disposal quantity has not been reported for one or more years. This data element is required. Please go back and review the range of years provided and the waste quantities reported under the Working Capacity Quantity column on the Landfill Details-Historical Years page. methodsUsedAndQuantity 
HHHH223Method #1, #2, or #3 was selected, but the waste quantity determined using the historical waste quantity method(s) has not been reported. MRR Reference: 98.346(b). methodsUsedAndQuantity 
HHHH266The first (start) year working capacities were used to determine waste disposal prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. workingCapacityStartYear 
HHHH267The last (end) year working capacities were used to determine waste disposal prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the value before continuing. workingCapacityEndYear 
HHHH268The first (start) year tipping receipts or company records were used to determine waste disposal prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. tippingReceiptsStartYear 
HHHH269The last (end) year tipping receipts or company records were used to determine waste disposal prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the value before continuing. tippingReceiptsEndYear 
HHHH300You have elected to enter your own result, but have not entered a value for the gas collection system collection efficiency (CE). You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEstimatedGasCollectionSysEfficiency 
HHHH301Collection efficiency estimated at the landfill. Please enter the collection efficiency as a decimal fraction between zero and one. You must correct this before continuing. officialUnroundedEstimatedGasCollectionSysEfficiency 
HHHH305-1You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-5. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedModeledCh4Generation 
HHHH305-2You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-5. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedModeledCh4Generation 
HHHH307You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-6. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEqHH6Ch4 
HHHH308For Equation HH-6, was the value for CH4 generation modeled (using Equation HH-1) or measured (using Equation HH-4)? This data element is required. Please be sure that you have entered results for both Equation HH-1 and Equation HH-4. officialRoundedEqHH6Ch4 
HHHH309You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-7. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedAnnualCh4GenerationEqHH7 
HHHH310Back-calculated methane generation (Equation HH-7). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAnnualCh4GenerationEqHH7 
HHHH311You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-8. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEqHH8Ch4 
HHHH312Methane emissions (Equation HH-8). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedEqHH8Ch4 
HHHH316You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-1. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedTotalAnnualModeledCh4Generation 
HHHH317The value for the modeled methane generation calculated using Equation HH-1. You must enter a value that is greater than zero. You must correct this before continuing. officialUnroundedTotalAnnualModeledCh4Generation 
HHHH318You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-1. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedTotalAnnualModeledCh4Generation 
HHHH319The value for the modeled methane generation calculated using Equation HH-1. You must enter a value that is greater than zero. You must correct this before continuing. officialUnroundedTotalAnnualModeledCh4Generation 
HHHH320The value for Equation HH-8 (methane emissions) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. This data element is required.GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneGenerationEquationHH8\CalculatedValueofficialUnroundedEqHH8Ch4For Landfills with gas collection systems include  a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH8
HHHH321The value for Equation HH-7 (back-calculated methane generation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. This data element is required.GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneGenerationEquationHH7\CalculatedValueofficialUnroundedAnnualCh4GenerationEqHH7For Landfills with gas collection systems include  a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH7
HHHH322The value reported for Equation HH-6 (methane emissions) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedEqHH6Ch4 
HHHH323The value for Equation HH-6 (methane emissions) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing.GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\ GasCollectionSystemDetails\ MethaneGenerationEquationHH6\CalculatedValueofficialUnroundedEqHH6Ch4For Landfills with gas collection systems include  a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH6
HHHH324The estimated gas collection system efficiency has not been reported. Please go back and revise this value before submitting your report. This data is required. officialUnroundedEstimatedGasCollectionSysEfficiency 
HHHH326The value for Equation HH-1 (modeled methane generation) from the landfill in the reporting year has not been reported. This data element is required.GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\ GasCollectionSystemDetails\AnnualModeledCH4Generation\CalculatedValueofficialUnroundedTotalAnnualModeledCh4GenerationFor Landfills with gas collection systems include  a non-null numeric value for the data element with the specified xpath.
HHHH328The value for Equation HH-1 (modeled methane generation) from the landfill in the reporting year has not been reported. This data element is required.GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\ NoGasCollectionSystemDetails\officialUnroundedTotalAnnualModeledCh4GenerationFor Landfills without gas collection systems include  a non-null numeric value for the data element with the specified xpath.
HHHH329The value for the oxidation factor (OX) used in Equation HH-5 has not been provided. This is a required data element. oxHH5 
HHHH330The value for the oxidation factor (OX) used in Equation HH-6 has not been provided. This is a required data element.GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\MethaneOxidationFractionHH6oxHH6For Landfills with gas collection systems include the this data element with value between 0 and 1
HHHH331The value for the oxidation factor (OX) used in Equation HH-7 has not been provided. This is a required data element.GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\MethaneOxidationFractionHH7oxHH7For Landfills with gas collection systems include the this data element with value between 0 and 1
HHHH332The value for the oxidation factor (OX) used in Equation HH-8 has not been provided. This is a required data element.GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\ MethaneOxidationFractionHH8oxHH8For Landfills with gas collection systems include the this data element with value between 0 and 1
HHHH333An indication was made that this facility has a gas collection system, but an indication as to whether landfill gas destruction occurs at the facility, off-site, or both has not been made. This data element is required. gasCollectionSystemDetails.destructionOccurredAt 
HHHH342Method #2 was selected for a range of years, but the estimated population was not provided for one or more of the years within that range. estimatedPopulationServedByTheLandfill 
HHHH343Method #3 was used for one or more years to determine the total annual waste quantity disposed, but the value for landfill capacity (LFC) used in Equation HH-3 was not provided. This is a required data element. For closed landfills, the value should equal the total waste-in-place at closure. For open landfills, the value should equal the capacity of the landfill used (or total waste-in-place). landfillCapacityThatUsesMethod3 
HHHH344You have not selected the method(s) used to determine the total annual waste disposal quantity for one or more years since the first year of emissions reporting. Please review the \'Waste Quantities/Methods Since First Year of Reporting\' table on the Landfill Details - Reporting Years page and use the check boxes provided to select the appropriate methods used for each year of the table and report the associated quantities (metric tons). If your facility was open each year since the first year of emissions reporting, but did not dispose of any waste in a given year, please select the method that would have been used had waste been disposed, and report a quantity of zero. transientData['wasteQuantities'] 
HHHH346-3Your report indicates the landfill does not have a gas collection system, however the total annual subpart methane emissions of [{1} metric tons] for the landfill does not equal [{2} metric tons], which is the value calculated by Equation HH-5. Please address this critical error. Then you can return here to perform another final review and submit your report. data['isAnnualMethaneEmissionsWithinRange'] 
HHHH372The number of annual operating hours for the measurement location cannot be lower than the number of annual operating hours for the destruction device. Please enter a valid number of operating hours, or click CANCEL. destructionDevices 
HHHH373The number of annual operating hours for the destruction device cannot be higher than the number of annual operating hours for the measurement location. Please enter a valid number of operating hours, or click CANCEL. annualOperatingHours 
HHHH374The number of annual operating hours ({1}) for the destruction device {2} cannot be higher than the number of annual operating hours ({3}) for the measurement location {4}. You must enter number of annual operating hours for either the destruction device or the measurement location. destructionDevices 
HHHH378You reported 0 for the Annual operating hours for the landfill gas measurement location ({1}). However, for the same measurement location you have reported an Annual quantity of recovered CH4 ({2} (metric tons)) greater than 0, implying the measurement location was operational for a period of time during the reporting year. You must report Annual operating hours for the measurement location greater than zero, if Annual quantity of recovered CH4 is greater than zero. Please check the values you entered and correct before continuing. recoveredCh4Quantity 
IGHG-ADD-2The greenhouse gas you are attempting to add is invalid because it already exists on the selection list provided. Please enter a unique greenhouse gas, or click CANCEL. ghgExisting 
II0442-1You did not select a gas/process type where DRE was claimed for your abatement system [{1}] in the fab [{2}]. Please address this critical error. Then you can return here to perform another final review and submit your report. data['isProcessSubTypeChecked'] 
II0444You cannot add this greenhouse gas because the CAS Registry Number you have provided for this &#39;other&#39; gas matches with an existing entry in e-GGRT&#39;s extended 40 CFR Part 98 Table A-1 gas list. It is possible it is included in the selection list provided, but with a different chemical name than the one you are using. The gas with the matching CAS Registry Number is identified within e-GGRT as follows: CAS Registry Number: {1}; Gas Name: {2}; Chemical Formula: {3}. If you would like to select this gas, click CANCEL and locate the gas in the selection list. If you are unable to locate this gas on the selection list provided, please <a href=http://www.ccdsupport.com/confluence/display/help/Contact+the+Help+Desk+-+Issues+Related+to+the+Identification+of+Specific+f-GHGs target=_blank>contact the GHGRP Help Desk</a>. transientData['isNewGasTableA1'] 
II0627"Used default factors" was selected as the method for estimating emissions for a gas/process type combination [{1}, CAS No. {2} / {3}] that does not have a default emission factor for the associated wafer size [{4}] for Semiconductor manufacturing, as specified for fab [{5}]. Please address this critical error. Then you can return here to perform another final review and submit your report. data['isSemiCombinationValid'] 
II0629Substrate Type. This data element is required. Please make a selection or click CANCEL. substrateType 
II0630Other Substrate Type (specify) is a required field when "other" is selected as the substrate type. Please enter a value or click CANCEL. otherSubstrateType 
II0631Annual Production of this Substrate in Terms of Surface Area (square meters). This data element is required. Please enter a value or click CANCEL. annualProductionofSubstrate 
II0632Annual Production of this Substrate in Terms of Surface Area (square meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionofSubstrate 
II0635Substrate Type. You have not yet added at least one substrate type for this fab. substrateTypes 
II0648Substrate Type. You may only enter a Substrate Type to a fab once, with the exception of the "other" type. Please select a different Substrate Type or click the CANCEL button to return to the Fab Information screen. transientData['substrateTypeAlreadySelected'] 
IIII0501You have selected Subpart II for reporting, but you have not yet added an anaerobic process. none 
IIII0502Name or ID. This data element is required. Please enter the required data or click CANCEL. anaerobicProcessIdentifier 
IIII0503Anaerobic Process. This data element is required. Please enter the required data or click CANCEL. anaerobicProcessType 
IIII0504Is biogas generated in the process recovered? This data element is required. Please enter the required data or click CANCEL. isBiogasRecovered 
IIII0505Number of weeks the anaerobic process system was operational. This data element is required. Please enter the required data or click CANCEL. numberOfWeeksSystemOperational 
IIII0506Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required. Please enter the required data or click CANCEL. doesFacilityMeasureCodOrBodConcentration 
IIII0507How does the facility monitor the CH4 concentration in the biogas collected for destruction? This data element is required. Please enter the required data or click CANCEL. methaneConcentrationMonitoringMethod 
IIII0508Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL. isBiogasTemperatureIncorporated 
IIII0509Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL. isBiogasPressureIncorporated 
IIII0510Is the biogas moisture content incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL. isBiogasMoistureContentIncorporated 
IIII0511Does CH4 destruction occur at the facility, off-site, or both? This data element is required. Please enter the required data or click CANCEL. methaneDestructionLocation 
IIII0512Was biogas flow measured on a wet or dry basis? This data element is required. Please enter the required data or click CANCEL. isBiogasFlowWetDryBasis 
IIII0513Was biogas CH4 concentration measured on a wet or dry basis? This data element is required. Please enter the required data or click CANCEL. isBiogasMethaneWetDryBasis 
IIII0514Flow for week(s) [{1}]. This data element is required. weeklyVolumeOfWastewater 
IIII0515COD for week(s) [{1}]. This data element is required. weeklyAverageCodBodConcentration 
IIII0516B0 for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported. methaneProductionPotential 
IIII0517MCF for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported. methaneConversionFactor 
IIII0518Report this value for CH4Gn. This data element is required. officialUnroundedCh4Generated 
IIII0519Report this value for CH4Gn. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4Generated 
IIII0520Report which CH4Gn result? This data element is required. isUserOverriddenCh4Generated 
IIII0521Flow for week(s) [{1}]. This data element is required. weeklyVolumeOfWastewater 
IIII0522BOD for week(s) [{1}]. This data element is required. weeklyAverageCodBodConcentration 
IIII0523B0 for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported. methaneProductionPotential 
IIII0524MCF for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported. methaneConversionFactor 
IIII0525Report this value for CH4Gn. This data element is required. officialUnroundedCh4Generated 
IIII0526Report this value for CH4Gn. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4Generated 
IIII0527Report which CH4Gn result? This data element is required. isUserOverriddenCh4Generated 
IIII0528Report this value for CH4En. This data element is required. officialUnroundedCh4 
IIII0529Report this value for CH4En. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
IIII0530Report which CH4En result? This data element is required. isUserOverriddenCh4 
IIII0531Volumetric Biogas Flow for week(s) [{1}]. This data element is required. weeklyVolumetricBiogasFlow 
IIII0532Biogas CH4 Concentration for week(s) [{1}]. This data element is required. weeklyBiogasMethaneConcentration 
IIII0533Biogas Temperature for week(s) [{1}]. This data element is required. weeklyBiogasTemperature 
IIII0534Biogas Pressure for week(s) [{1}]. This data element is required. weeklyBiogasPressure 
IIII0535Biogas Moisture for week(s) [{1}]. This data element is required. weeklyBiogasMoistureContent 
IIII0536Annual quantity of CH4 recovered from the process. This data element is required. officialUnroundedCh4Recovered 
IIII0537Annual quantity of CH4 recovered from the process. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4Recovered 
IIII0538Annual operating hours for the primary destruction device. This data element is required. annualOperatingHoursOfPrimaryDestructionDevice 
IIII0539Annual operating hours for the primary destruction device. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualOperatingHoursOfPrimaryDestructionDevice 
IIII0540Destruction efficiency for the primary destruction device. This data element is required. methanePrimaryDeviceDestructionEfficiency 
IIII0541Destruction efficiency for the primary destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing. methanePrimaryDeviceDestructionEfficiency 
IIII0542Is a back-up destruction device present at the facility? This data element is required. isBackUpDestructionDevicePresentAtFacility 
IIII0543Annual operating hours for the back-up destruction device. This data element is required if you indicate that a back-up destruction device is present. annualOperatingHoursOfBackUpDestructionDevice 
IIII0544Annual operating hours for the back-up destruction device. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualOperatingHoursOfBackUpDestructionDevice 
IIII0545Destruction efficiency for the back-up destruction device. This data element is required if you indicate that a back-up destruction device is present. methaneBackUpDeviceDestructionEfficiency 
IIII0546Destruction efficiency for the back-up destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing. methaneBackUpDeviceDestructionEfficiency 
IIII0547Report this value for CH4En. This data element is required. officialUnroundedCh4 
IIII0548Report this value for CH4En. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
IIII0549Report which CH4En result? This data element is required. isUserOverriddenCh4 
IIII0550Average depth of the lagoon. This data element is required. averageLagoonDepth 
IIII0551Document or diagram that pertains to this process. This data element is required. uploadedDiagramOrDocumentName 
IIII0552Number of weeks the anaerobic process system was operational. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing. numberOfWeeksSystemOperational 
IIII0562Annual operating hours for the primary destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. annualOperatingHoursOfPrimaryDestructionDevice 
IIII0563Annual operating hours for the back-up destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. annualOperatingHoursOfBackUpDestructionDevice 
IIII0571CH4 collection efficiency (based on cover type). This data element is required. methaneCollectionEfficiency 
IIII0575Report which annual quantity of CH4 recovered result? This data element is required. isUserOverriddenCh4Generated 
IIII0576Biogas CH4 Concentration for week(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. weeklyBiogasMethaneConcentration 
IIII0577Biogas Moisture for week(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing. weeklyBiogasMoistureContent 
IIII0600You have selected Subpart II for reporting, but you have not yet uploaded a file containing a narrative description and/or diagram of a wastewater treatment system. none 
IIII0602Number of hours the biogas collection system was operational. This data element is required if biogas generated in the process recovered. Please enter the required data or click CANCEL. numberOfHoursTheBiogasSystemOperational 
IIII0603Number of hours the biogas collection system was operational. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. numberOfHoursTheBiogasSystemOperational 
IIII0604The number of annual operating hours for the primary destruction device cannot be higher than the number of hours the biogas collection system was operational. Please enter a valid number of operating hours, or click CANCEL. annualOperatingHoursOfPrimaryDestructionDevice 
IIII0605The number of annual operating hours for the back-up destruction device cannot be higher than the number of hours the biogas collection system was operational. Please enter a valid number of operating hours, or click CANCEL. annualOperatingHoursOfBackUpDestructionDevice 
IIII0606The number of annual operating hours for the primary destruction device cannot be higher than the number of hours the biogas collection system was operational. Please enter a valid number of operating hours, or click CANCEL. numberOfHoursTheBiogasSystemOperational 
IIII0607The number of annual operating hours for the back-up destruction device cannot be higher than the number of hours the biogas collection system was operational. Please enter a valid number of operating hours, or click CANCEL. numberOfHoursTheBiogasSystemOperational 
IIII5007Does the facility use a wet milling or dry milling process? This data element is required if the facility performs an ethanol production processing operation. Please make a selection or click CANCEL. If the facility does not perform an ethanol production processing operation, select the last option. ethanolProductionProcessingOperation 
IIII501For reporting year {1} you have reported negative CH4 emissions [{2} (metric tons)] for Subpart II. It is not expected for Subpart II facilities to report negative emissions from the reported processes. Please go back into your {1} report and verify that all of the facility\'s inputs are reported correctly. Please address this critical error. Then you can return here to perform another final review and submit your report. data[methaneCalcValue] 
IIII502The fraction of hours the primary destruction device was operating during the {1} reporting year is greater than 1 (100%) which is unexpected. Please address this critical error. Then you can return here to perform another final review and submit your report. data['deviceOperatingHours'] 
KCEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
KCEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
KCEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
KCML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
KCML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
KCML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
KCML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
KCML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
KCML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
KCML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
KCML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
KCML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
KCML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
KCML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
KCML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
KCML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
KCML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
KCML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
KCML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
KCML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
KCML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
KCML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
KCML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
KCML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
KCML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
KCML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
KCML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
KCML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
KCML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
KCML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
KCML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
KCML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
KCML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
KCML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
KCML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
KCML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
KCML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
KCML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
KCML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
KCML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
KCML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
KK001Annual facility ferroalloy product production capacity. This data element is required. annualFerroAlloyProductionCapacity 
KK002Annual facility ferroalloy product production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFerroAlloyProductionCapacity 
KK003Please make a selection or click CANCEL. hasCEMS 
KK004Name of input/output to the furnace. This data element is required. name 
KK005Type of input/output to the furnace. This data element is required. type 
KK006Method used to determine carbon content. This data element is required. methodForCarbonContent 
KK007Number of months that missing data procedures were followed to determine monthly mass of the input or output. This data element is required. numOfMonthsMissingProcedureUsed 
KK008Number of months that missing data procedures were followed to determine monthly mass of the input or output. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. numOfMonthsMissingProcedureUsed 
KK013Annual methane emissions from the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 
KK014You have not yet added an input for this furnace. inputList 
KK015You have not yet added an output for this furnace. outputList 
KK016You have selected Subpart K for reporting, but you have not yet added a furnace. none 
KK022The procedure used to develop substitute data for monthly mass. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherProcedureForSubstituteData 
KK030Annual production of Ferrochromium product (tons). You must enter a value that is greater than or equal to zero. ferroChromium 
KK031Annual production of Ferromanganese product (tons). You must enter a value that is greater than or equal to zero. ferromanganese 
KK032Annual production of Ferromolybdenum product (tons). You must enter a value that is greater than or equal to zero. ferromolybdenum 
KK033Annual production of Ferronickel product (tons). You must enter a value that is greater than or equal to zero. ferronickel 
KK034Annual production of Ferrosilicon product (tons). You must enter a value that is greater than or equal to zero. ferrosilicon 
KK035Annual production of Ferrotitanium product (tons). You must enter a value that is greater than or equal to zero. ferrotitanium 
KK036Annual production of Ferrotungsten product (tons). You must enter a value that is greater than or equal to zero. ferrotungsten 
KK037Annual production of Ferrovanadium product (tons). You must enter a value that is greater than or equal to zero. ferrovanadium 
KK038Annual production of Silicomanganese product (tons). You must enter a value that is greater than or equal to zero. silicomanganese 
KK039Annual production of Silicon Metal product (tons). You must enter a value that is greater than or equal to zero. siliconmetal 
KK040Annual production of Ferrochromium product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrochromiumCheck 
KK041Annual production of Ferromanganese product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferromanganeseCheck 
KK042Annual production of Ferromolybdenum product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferromolybdenumCheck 
KK043Annual production of Ferronickel product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferronickelCheck 
KK044Annual production of Ferrosilicon product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrosiliconCheck 
KK045Annual production of Ferrotitanium product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrotitaniumCheck 
KK046Annual production of Ferrotungsten product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrotungstenCheck 
KK047Annual production of Ferrovanadium product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrovanadiumCheck 
KK048Annual production of Silicomanganese product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. silicomanganeseCheck 
KK049Annual production of Silicon Metal product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. siliconmetalCheck 
KK050You have not provided the annual production quantity (tons) of at least one ferroalloy product produced by this electric arc furnace. ferrochromiumCheck 
KUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
KUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
LGHG-ADD-2The greenhouse gas you are attempting to add is invalid because it already exists on the selection list provided. Please enter a unique greenhouse gas, or click CANCEL. ghgExisting 
LIVT-L0064Batch or Continuous? The data element at row {1} must be either \'Batch\' or \'Continuous\' batchOrContinuous 
LIVT-L0068You have indicated that facility emissions include one or more major F-GHG constituents of a fluorinated gas product that is sold or transferred to another person (Introduction tab, cell L14), but you have not included any F-GHGs where the answer to \'Is the F-GHG a Major Constituent of a product that is sold or transferred to another person?\' is \'Yes\' (Production Transformation tab, Part 3). You must correct this discrepancy. transientData['isFGhgMajor'] 
LL0019You have not yet entered F-GHG facility summary information for this fluorinated gas production facility. transientData['reportingYear'] 
LL0020Did the facility produce only one fluorinated gas product, including fluorinated gas products that are intermediates? This data element is required. onlyOneProductProduced 
LL0021Did facility emissions include one or more major F-GHG constituents of a Fluorinated gas product that is sold or transferred to another person? This data element is required. majorFghgConstituents 
LL0023Did the facility destroy previously produced fluorinated GHGs in destruction processes that are not part of a fluorinated gas production process or fluorinated gas transformation process? This data element is required. otherDestructionProcesses 
LL0024Did the facility vent residual fluorinated GHGs from containers? This data element is required. ventFromContainers 
LL0026Unique Process Name/Identifier. This data element is required. processName 
LL0027Unique Process Name/Identifier. The same name or identifier already exists for this facility. processName 
LL0028Process Type. This data element is required. processType 
LL0051Were the annual emissions from process vents based on a missing data procedure? This data element is required. processVentEmissionsBasedOnMissingData 
LL0052Data element for which missing data procedures were used, and the reason for the missing data. This data element is required. processVentMissingDataReason 
LL0053Number of hours a missing data procedure was used to determine F-GHG emissions. This data element is required. processVentMissingDataHours 
LL0054Provide the method used to estimate the missing data. This data element is required. processVentMissingDataMethod 
LL0055If the data element is reportable under subpart L, provide estimates of missing data. This data element is required. If the data element is not reportable enter \'NA\' processVentMissingDataEstimates 
LL0057Were the annual emissions from equipment leaks based on a missing data procedure? This data element is required. equipmentLeakEmissionsBasedOnMissingData 
LL0058Data element for which missing data procedures were used, and the reason for the missing data. This data element is required. equipmentLeakMissingDataReason 
LL0059Number of hours a missing data procedure was used to determine F-GHG emissions. This data element is required. equipmentLeakMissingDataHours 
LL0060Provide the method used to estimate the missing data. This data element is required. equipmentLeakMissingDataMethod 
LL0061If the data element is reportable under subpart L, provide estimates of missing data. This data element is required. If the data element is not reportable enter \'NA\' equipmentLeakMissingDataEstimates 
LL0063Characterize the process. This data element is required. distillation 
LL0066You have not yet added any f-GHG groups for this process. processFghgGroupDataMap 
LL0074Number of hours a missing data procedure was used to determine F-GHG emissions. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. processVentMissingDataHours 
LL0076Number of hours a missing data procedure was used to determine F-GHG emissions. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. equipmentLeakMissingDataHours 
LL0081For this generically-identified process, report the methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks. You must select at least one check box. averageEfApproach 
LL0520Was the container information based on a missing data procedure? This data element is required. containerBasedOnMissingData 
LL0521Data element for which missing data procedures were used, and the reason for the missing data. This data element is required. containerMissingDataReason 
LL0522Number of hours a missing data procedure was used to determine F-GHG emissions from container. This data element is required. containerMissingDataHours 
LL0523Number of hours a missing data procedure was used to determine F-GHG emissions from container. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. containerMissingDataHours 
LL0524Provide the method used to estimate the missing data. This data element is required. containerMissingDataMethod 
LL0525If the data element is reportable under subpart L, provide estimates of missing data. This data element is required. If the data element is not reportable enter \'NA\' containerMissingDataEstimates 
LLLL001Annual mass of carbon dioxide. This data element is required. officialUnroundedCo2 
LLLL002Annual mass of carbon dioxide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 
LLLL005You have not uploaded a reporting form file. jctSubPartFacility 
MMALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
MMALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
MMMM0001GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID 
MMMM0002Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod 
MMMM0003Type of Facility. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/SubpartMMFacilityDataDetails/FacilityTypefacilityType 
MMMM0035For refineries, select "In" if the product is entering the refinery or "Out" if the product is leaving the refinery. For importers and exporters, select "Import" if the product is being imported or "Export" if the product is being exported. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/IsCalculationMethod2UsedisProductEnteringOrLeavingFacility 
MMMM0038Select the product name code. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/IsCalculationMethod2UsedproductNameCode 
MMMM0048Select the units for the measured quantity. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/NumberOfSamplesmeasuredQuantityUnits 
MMMM0050Enter the product annual quantity. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/SamplingStandardMethodUsedproductAnnualQuantityInclude the specified Xpath with the <ProductAnnualQuantity> provided with a non-null value.
MMMM0067A negative value for Product Annual Quantity was entered. A negative product annual quantity may not be entered in this field. Please correct this error and resubmit.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/CarbonShareproductAnnualQuantityInclude the specified Xpath with the <ProductAnnualQuantity> provided with a non-null value.
MMMM00680 was entered for the product annual quantity. This form must not be submitted for products where the annual product quantity is zero. If the annual product quantity for the above product(s) was not zero, then you must make the appropriate corrections and resubmit.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/CarbonShareTestMethodUsedproductAnnualQuantity 
MMMM0069Enter the percent of the product that is petroleum based. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/CalculatedCarbonDioxideQuantityEmissionFactorpercentPetroleumBased 
MMMM0071Enter the Annual CO2 Quantity in Metric Tons. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/CalculatedCarbonDioxideQuantityEmissionFactorUnitsannualCo2QuantityInclude the specified Xpath with the <AnnualCarbonDioxideQuantity> provided with a non-null value.
MMMM0076A negative value for Annual CO2 Quantity was entered. A negative annual CO2 quantity may not be entered in this field. Please correct this error and resubmit.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/DensityTestResultsannualCo2QuantityInclude the specified Xpath with the <AnnualCarbonDioxideQuantity> provided with a non-null value.
MMMM00770 was entered for the Annual CO2 Quantity. This form must not be submitted for products where the annual product quantity is zero. If the annual product quantity for the above product(s) was not zero, then you must make the appropriate corrections and resubmit.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/DensityTestMethodUsedannualCo2Quantity 
MMMM0078Select "Yes" or "No" for whether Calculation Method 2 was used for this product. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/CarbonDioxideQuantitySumisCalculationMethod2Used 
MMMM0079Select "Yes" or "No" for whether Calculation Method 2 was used for this product.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/CarbonDioxideQuantitySumisCalculationMethod2Used 
MMMM0080Enter the number of samples collected for use in Calculation Methodology 2. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/BulkNaturalGasLiquidsQuantitynumberOfSamples 
MMMM0082Enter sampling standard method used for Calculation Method 2. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/BulkNaturalGasLiquidsQuantityUnitssamplingStandardMethodUsed 
MMMM0084Enter the carbon share test results (mass %) for Calculation Method 2. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/CrudeOilInjectedcarbonShare 
MMMM0086Enter standard method used to test carbon share for Calculation Method 2. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/IsProductEnteringOrLeavingFacilitycarbonShareTestMethodUsed 
MMMM0088Enter CO2 emission factor for Calculation Method 2. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/BlendedProductNamecalculatedCo2QuantityEmissionFactor 
MMMM0091Enter unit of measure for the emission factor for Calculation Method 2: metric tons CO2 per barrel (MT CO2/BBL), or metric tons CO2 per metric ton (MT CO2/MT) of product. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductComponentsTableDetails/BlendedProductComponentsRowDetails/BlendedProductIdentifiercalculatedCo2QuantityEmissionFactorUnits 
MMMM0093Enter the density test results in units of metric tons per barrel for Calculation Method 2. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/AnnualCarbonDioxideQuantitydensityTestResults 
MMMM0095Enter the standard method used to test density for Calculation Method 2. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/TotalNumberOfBlendedComponentsdensityTestMethodUsed 
MMMM0098Enter a value for the Sum of CO2 Quantity for All Products - Refinery. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/BlendedProductIdentifierco2QuantitySumInclude the specified Xpath with the <CarbonDioxideQuantitySum> provided with a non-null value.
MMMM0099Enter a value for the Sum of CO2 Quantity for All Products - Importer. This data element is required if your are an importer/exporter. You should enter zero if you have not imported.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductComponentsTableDetails/BlendedProductComponentsRowDetails/BlendingComponentNumberco2QuantitySum 
MMMM0100Enter a value for the Sum of CO2 Quantity for All Products - Exporter. This data element is required if your are an importer/exporter. You should enter zero if you have not exported.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/TotalNumberOfBlendedComponentsco2QuantitySum 
MMMM0105Quantity of Bulk Natural Gas Liquids Received for Processing. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductComponentsTableDetails/BlendedProductComponentsRowDetails/BlendingComponentNameCodebulkNaturalGasLiquidsQuantity 
MMMM0107Enter the units for the Quantity of Bulk Natural Gas Liquids. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductComponentsTableDetails/BlendedProductComponentsRowDetails/BlendingComponentQuantityUnitsbulkNaturalGasLiquidsQuantityUnits 
MMMM0111Enter quantity of crude oil (in barrels) injected into a crude oil supply or reservoir. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/CrudeOilEnteringRefinerycrudeOilInjected 
MMMM0116Select whether the product is entering the facility or leaving the facility. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FractionOfGasSentisProductEnteringOrLeavingFacility 
MMMM0119Enter the Blended Product Name. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareCombustionEfficiencyblendedProductName 
MMMM0120Enter a unique identifier for the blended product(s). This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareFeedGasCH4MoleFractionblendedProductIdentifier 
MMMM0121Enter annual CO2 emissions in metric tons (MT) that would result from complete combustion or oxidation of the blended product(s). This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareFeedGasCO2MoleFractionannualCo2Quantity 
MMMM0127Enter the total number of blending components for product(s). This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/Ch4EmissionstotalNumberOfBlendedComponents 
MMMM0129A unique identifier was not provided for one or more components of blended products. Select a unique identifier for each component of each blended product. Each ID for a component of a blended product must match a blended product ID from the Blended Products table.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/Ch4EmissionsblendedProductIdentifier 
MMMM0132Enter a unique identifier for each blending component, numbered sequentially. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingQuartersblendingComponentNumber 
MMMM0133Total Number of Blending Components. The total number of blending components reported in Table 1 on the "Blended Products" tab for this Blended Product ID is not consistent with the total number of blended product components reported in Table 2 on the "Blended Products" tab for the same Blended Product ID. You must correct this before continuing.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingHourstotalNumberOfBlendedComponents 
MMMM0134The Blending Component Name Code is missing for one or more components in the Components of Blended Products Table. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/EorInjectionMissingDataProcUsedDetails/EorInjectionMissingDataProcUsedRowDetails/MissingQuartersblendingComponentNameCode 
MMMM0136Enter the blending component quantity units. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/EorInjectionMissingDataProcUsedDetails/EorInjectionMissingDataProcUsedRowDetails/MissingHoursblendingComponentQuantityUnits 
MMMM0138Enter the quantity of the blending component in units specified. This data element is required.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/UniqueInjectionPumpBlowdownsDetails/UniqueInjectionPumpBlowdownsRowDetails/PumpCapacityblendingComponentQuantity 
MMMM0165The FacilityDataDetails node is required. The submitted XML omits this node. facilityData 
MMMM0166The AggregateProductsDetails node is required. The submitted XML omits this node. aggregateProductsData 
MMMM0167The TotalCarbonDioxideQuantityDetails node is required. The submitted XML omits this node. totalCo2QuantityData 
MMMM0182You have indicated that you are reporting optional procedures for blended products however you have left the Blended Products table blank. If you are reporting optional procedures for blended products you must complete both the Blended Products table and the Blending Components table.GHG/FacilitySiteDetails/ SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/ BlendedProductsTableDetails/ BlendedProductsRowDetails/UniqueIdentifiertable1Data[1]if GHG/FacilitySiteDetails/ SubPartInformation/SubPartMM/SubPartMMReportingFormsDetail/ AggregateProductsDetails/ ReportingOptionalProceduresForBlendedProducts = "Yes" then the specified Xpath must be included with at least one instance of a non-null <UniqueIdentifier>
MMMM0183You have indicated that you are reporting optional procedures for blended products however you have left the Blending Components table blank. If you are reporting optional procedures for blended products you must complete both the Blended Products table and the Blending Components table.GHG/FacilitySiteDetails/ SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/ BlendedProductsTableDetails/ BlendedProductComponentsTableDetails/ BlendedProductComponentsRowDetails/UniqueIdentifier         table2Data[1]if GHG/FacilitySiteDetails/ SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/ AggregateionProductsDetails/ ReportingOptionalProceduresForBlendedProducts = "Yes" then the specified Xpath must be included with at least one instance of a non-null <UniqueIdentifier>
MMMM0191Percent Petroleum Based. It appears that the value you entered in the reporting form is not being processed as a percent. If you are using an Older MM reporting form (created before 10/19/2016), you will need to add a percent sign after the value entered for it to be interpreted as a percent. percentPetroleumBased 
MMMM0192Carbon Share (mass %). It appears that the value you entered in the reporting form is not being processed as a percent. If you are using an Older MM reporting form (created before 10/19/2016), you will need to add a percent sign after the value entered for it to be interpreted as a percent. carbonShare 
MMMM0193Number of Samples. The number of samples reported on the "Aggregate Products" tab must be greater than zero because you have indicated that Calculation Method 2 was used for this product. You must correct the current value before continuing. numberOfSamples 
MMMM1000You have selected Subpart MM for reporting, but you have not yet uploaded a reporting form file. none 
NCEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
NCEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
NCEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
NCML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
NCML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
NCML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
NCML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
NCML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
NCML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
NCML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
NCML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
NCML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
NCML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
NCML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
NCML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
NCML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
NCML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
NCML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
NCML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
NCML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
NCML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
NCML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
NCML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
NCML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
NCML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
NCML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
NCML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
NCML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
NCML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
NCML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
NCML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
NCML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
NCML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
NCML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
NCML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
NCML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
NCML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
NCML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
NCML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
NCML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
NCML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
NN001Annual quantity of limestone charged to all furnaces. This data element is required. If limestone was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfLimeStone 
NN002Annual quantity of limestone charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfLimeStone 
NN004Annual quantity of dolomite charged to all furnaces. This data element is required. If dolomite was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfDolomite 
NN005Annual quantity of dolomite charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfDolomite 
NN007Annual quantity of sodium carbonate charged to all furnaces. This data element is required. If sodium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfSodiumCarbonate 
NN008Annual quantity of sodium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfSodiumCarbonate 
NN010Annual quantity of barium carbonate charged to all furnaces. This data element is required. If barium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfBariumCarbonate 
NN011Annual quantity of barium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfBariumCarbonate 
NN012Annual quantity of potassium carbonate charged to all furnaces. This data element is required. If potassium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfPotassiumCarbonate 
NN013Annual quantity of potassium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfPotassiumCarbonate 
NN014Annual quantity of lithium carbonate charged to all furnaces. This data element is required. If lithium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfLithiumCarbonate 
NN015Annual quantity of lithium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfLithiumCarbonate 
NN016Annual quantity of strontium carbonate charged to all furnaces. This data element is required. If strontium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfStrontiumCarbonate 
NN017Annual quantity of strontium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfStrontiumCarbonate 
NN018Please make a selection or click CANCEL. hasCEMS 
NN019Annual quantity of glass produced by the furnace. This data element is required. annualQuantity 
NN020Annual quantity of glass produced by the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualQuantity 
NN022Selection of at least one raw material type is required for each furnace. Please select one or more raw material types or click CANCEL. selectedFuelIDs 
NN023Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of limestone. This data element is required. fuelDTOsMap['limestone'].m_monthsOfMissingdataProc 
NN024The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of limestone. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['limestone'].m_monthsOfMissingdataProc 
NN025Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of limestone. This data element is required. fuelDTOsMap['limestone'].mf_monthsOfMissingdataProc 
NN026The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of limestone. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['limestone'].mf_monthsOfMissingdataProc 
NN027Method used to determine the fraction of calcination for limestone. This data element is required. fuelDTOsMap['limestone'].f_method 
NN028Method used to determine the fraction of calcination for limestone. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['limestone'].f_methodOther 
NN029Mass fraction verification test data for limestone. These data elements are required. fuelDTOsMap['limestone'].mf_testDetails 
NN030Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of dolomite. This data element is required. fuelDTOsMap['dolomite'].m_monthsOfMissingdataProc 
NN031The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of dolomite. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['dolomite'].m_monthsOfMissingdataProc 
NN032Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of dolomite. This data element is required. fuelDTOsMap['dolomite'].mf_monthsOfMissingdataProc 
NN033The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of dolomite. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['dolomite'].mf_monthsOfMissingdataProc 
NN034Method used to determine the fraction of calcination for dolomite. This data element is required. fuelDTOsMap['dolomite'].f_method 
NN035Method used to determine the fraction of calcination for dolomite. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['dolomite'].f_methodOther 
NN036Mass fraction verification test data for dolomite. These data elements are required. fuelDTOsMap['dolomite'].mf_testDetails 
NN037Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of sodium carbonate. This data element is required. fuelDTOsMap['sodium_carbonate'].m_monthsOfMissingdataProc 
NN038The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of sodium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['sodium_carbonate'].m_monthsOfMissingdataProc 
NN039Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of sodium carbonate. This data element is required. fuelDTOsMap['sodium_carbonate'].mf_monthsOfMissingdataProc 
NN040The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of sodium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['sodium_carbonate'].mf_monthsOfMissingdataProc 
NN041Method used to determine the fraction of calcination for sodium carbonate. This data element is required. fuelDTOsMap['sodium_carbonate'].f_method 
NN042Method used to determine the fraction of calcination for sodium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['sodium_carbonate'].f_methodOther 
NN043Mass fraction verification test data for sodium carbonate. These data elements are required. fuelDTOsMap['sodium_carbonate'].mf_testDetails 
NN044Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of barium carbonate. This data element is required. fuelDTOsMap['barium_carbonate'].m_monthsOfMissingdataProc 
NN045The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of barium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['barium_carbonate'].m_monthsOfMissingdataProc 
NN046Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of barium carbonate. This data element is required. fuelDTOsMap['barium_carbonate'].mf_monthsOfMissingdataProc 
NN047The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of barium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['barium_carbonate'].mf_monthsOfMissingdataProc 
NN048Method used to determine the fraction of calcination for barium carbonate. This data element is required. fuelDTOsMap['barium_carbonate'].f_method 
NN049Method used to determine the fraction of calcination for barium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['barium_carbonate'].f_methodOther 
NN050Mass fraction verification test data for barium carbonate. These data elements are required. fuelDTOsMap['barium_carbonate'].mf_testDetails 
NN051Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of potassium carbonate. This data element is required. fuelDTOsMap['potassium_carbonate'].m_monthsOfMissingdataProc 
NN052The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of potassium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['potassium_carbonate'].m_monthsOfMissingdataProc 
NN053Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of potassium carbonate. This data element is required. fuelDTOsMap['potassium_carbonate'].mf_monthsOfMissingdataProc 
NN054The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of potassium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['potassium_carbonate'].mf_monthsOfMissingdataProc 
NN055Method used to determine the fraction of calcination for potassium carbonate. This data element is required. fuelDTOsMap['potassium_carbonate'].f_method 
NN056Method used to determine the fraction of calcination for potassium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['potassium_carbonate'].f_methodOther 
NN057Mass fraction verification test data for potassium carbonate. These data elements are required. fuelDTOsMap['potassium_carbonate'].mf_testDetails 
NN058Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of lithium carbonate. This data element is required. fuelDTOsMap['lithium_carbonate'].m_monthsOfMissingdataProc 
NN059The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of lithium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['lithium_carbonate'].m_monthsOfMissingdataProc 
NN060Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of lithium carbonate. This data element is required. fuelDTOsMap['lithium_carbonate'].mf_monthsOfMissingdataProc 
NN061The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of lithium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['lithium_carbonate'].mf_monthsOfMissingdataProc 
NN062Method used to determine the fraction of calcination for lithium carbonate. This data element is required. fuelDTOsMap['lithium_carbonate'].f_method 
NN063Method used to determine the fraction of calcination for lithium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['lithium_carbonate'].f_methodOther 
NN064Mass fraction verification test data for lithium carbonate. These data elements are required. fuelDTOsMap['lithium_carbonate'].mf_testDetails 
NN065Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of strontium carbonate. This data element is required. fuelDTOsMap['strontium_carbonate'].m_monthsOfMissingdataProc 
NN066The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of strontium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['strontium_carbonate'].m_monthsOfMissingdataProc 
NN067Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of strontium carbonate. This data element is required. fuelDTOsMap['strontium_carbonate'].mf_monthsOfMissingdataProc 
NN068The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of strontium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['strontium_carbonate'].mf_monthsOfMissingdataProc 
NN069Method used to determine the fraction of calcination for strontium carbonate. This data element is required. fuelDTOsMap['strontium_carbonate'].f_method 
NN070Method used to determine the fraction of calcination for strontium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['strontium_carbonate'].f_methodOther 
NN071Mass fraction verification test data for strontium carbonate. These data elements are required. fuelDTOsMap['strontium_carbonate'].mf_testDetails 
NN075Mass fraction verification test date. This data element is required. testDate 
NN077The mass fraction of the sample. This data element is required. samples[0] 
NN078The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[0] 
NN079The mass fraction of the sample. This data element is required. samples[1] 
NN080The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[1] 
NN081The mass fraction of the sample. This data element is required. samples[2] 
NN082The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[2] 
NN083The mass fraction of the sample. This data element is required. samples[3] 
NN084The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[3] 
NN085The mass fraction of the sample. This data element is required. samples[4] 
NN086The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[4] 
NN088The method (and any variations) used to determine the mass fraction for limestone. This data element is required. fuelDTOsMap['limestone'].a_method 
NN089The method (and any variations) used to determine the mass fraction for limestone. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['limestone'].a_methodTest 
NN090The method (and any variations) used to determine the mass fraction for dolomite. This data element is required. fuelDTOsMap['dolomite'].a_method 
NN091The method (and any variations) used to determine the mass fraction for dolomite. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['dolomite'].a_methodTest 
NN092The method (and any variations) used to determine the mass fraction for sodium carbonate. This data element is required. fuelDTOsMap['sodium_carbonate'].a_method 
NN093The method (and any variations) used to determine the mass fraction for sodium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['sodium_carbonate'].a_methodTest 
NN094The method (and any variations) used to determine the mass fraction for barium carbonate. This data element is required. fuelDTOsMap['barium_carbonate'].a_method 
NN095The method (and any variations) used to determine the mass fraction for barium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['barium_carbonate'].a_methodTest 
NN096The method (and any variations) used to determine the mass fraction for potassium carbonate. This data element is required. fuelDTOsMap['potassium_carbonate'].a_method 
NN097The method (and any variations) used to determine the mass fraction for potassium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['potassium_carbonate'].a_methodTest 
NN098The method (and any variations) used to determine the mass fraction for lithium carbonate. This data element is required. fuelDTOsMap['lithium_carbonate'].a_method 
NN099The method (and any variations) used to determine the mass fraction for lithium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['lithium_carbonate'].a_methodTest 
NN100The method (and any variations) used to determine the mass fraction for strontium carbonate. This data element is required. fuelDTOsMap['strontium_carbonate'].a_method 
NN101The method (and any variations) used to determine the mass fraction for strontium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['strontium_carbonate'].a_methodTest 
NN200Annual quantity of limestone charged to furnace (tons). This data element is required. cemsFuelDTOsMap['limestone'].annualQuantityCharged 
NN201Annual quantity of dolomite charged to furnace (tons). This data element is required. cemsFuelDTOsMap['dolomite'].annualQuantityCharged 
NN202Annual quantity of sodium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['sodium_carbonate'].annualQuantityCharged 
NN203Annual quantity of barium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['barium_carbonate'].annualQuantityCharged 
NN204Annual quantity of potassium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['potassium_carbonate'].annualQuantityCharged 
NN205Annual quantity of lithium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['lithium_carbonate'].annualQuantityCharged 
NN206Annual quantity of strontium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['strontium_carbonate'].annualQuantityCharged 
NN207You have selected Subpart N for reporting, but you have not yet added a furnace. groupUnit 
NN504You indicated that a unit [{1}] is monitored by CEMS, but you have not associated it with any CEMS Monitoring Locations (CMLs). From the Subpart N Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. Please address this critical error. Then you can return here to perform another final review and submit your report. data[monitored] 
NUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
NUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
NNALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
NNALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
NNNN001Supplier Type. This data element is required. supplierCategory 
NNNN002Natural gas delivered to Residential consumers. This data element is required. Please enter the required data. subPartNNEndUsesLDC.volumeResidentialConsumers 
NNNN003Residential consumers. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. subPartNNEndUsesLDC.volumeResidentialConsumers 
NNNN005Natural gas delivered to Commercial consumers. This data element is required. Please enter the required data. subPartNNEndUsesLDC.volumeCommercialConsumers 
NNNN006Commercial consumers. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. subPartNNEndUsesLDC.volumeCommercialConsumers 
NNNN008Natural gas delivered to Industrial consumers. This data element is required. Please enter the required data. subPartNNEndUsesLDC.volumeIndustrialConsumers 
NNNN009Industrial consumers. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. subPartNNEndUsesLDC.volumeIndustrialConsumers 
NNNN011Natural gas delivered to Electricity generating facilities. This data element is required. Please enter the required data. subPartNNEndUsesLDC.volumeGeneratingFacs 
NNNN012Electricity generating facilities. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. subPartNNEndUsesLDC.volumeGeneratingFacs 
NNNN014Annual Volume of Natural Gas received for processing. This data element is required. Please enter the required data. subPartNNMiscInfoNGL.naturalGasReceived 
NNNN015Annual Volume of Natural Gas received for processing. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. subPartNNMiscInfoNGL.naturalGasReceived 
NNNN019Annual quantity of Propane odorized at the facility and delivered to others. This data element is required. Please enter the required data. subPartNNMiscInfoNGL.propaneDelivered 
NNNN020Annual quantity of Propane odorized at the facility and delivered to others. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. subPartNNMiscInfoNGL.propaneDelivered 
NNNN022Supplier Type. This data element is required. supplierCategory 
NNNN023Total annual volume of natural gas received at the city gate(s). This data element is required. fuelVolumeNN1_NN2.fuelVolume 
NNNN024Total annual volume of natural gas received at the city gate(s). You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.fuelVolume 
NNNN026Days in reporting year for which substitute data procedures were used. This data element is required. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed 
NNNN027Number of days in the reporting year for which missing data procedures were used. This value should be within the range of 0 to 365 days (or 366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed 
NNNN029Industry standard used to measure the volume. This data element is required. fuelVolumeNN1_NN2.standardOfMeasure 
NNNN030Industry standard used to measure the volume. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelVolumeNN1_NN2.standardOfMeasureOtherDesc 
NNNN031Total annual volume of product supplied. This data element is required. fuelVolumeNN1_NN2.fuelVolume 
NNNN032Total annual volume of product supplied. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.fuelVolume 
NNNN038Days in reporting year for which substitute data procedures were used. This data element is required. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed 
NNNN039Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (or 366 days for a leap year). The value you provided is outside this range. You must correct the value before submitting your report. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed 
NNNN041Industry standard used to measure the volume. This data element is required. fuelVolumeNN1_NN2.standardOfMeasure 
NNNN042Industry standard used to measure the volume. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelVolumeNN1_NN2.standardOfMeasureOtherDesc 
NNNN043Higher heating value. This data element is required. Please enter the required data. hhv.hhvValue 
NNNN044Higher heating value. You must enter a value that is greater than or equal to zero. You must correct the value before submitting your report. hhv.hhvValue 
NNNN046Higher heating value. This data element is required. Please enter the required data or click CANCEL. hhv.hhvValue 
NNNN047Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. hhv.daysSubstituteDataProceduresUsed 
NNNN048Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. hhv.daysSubstituteDataProceduresUsed 
NNNN050Industry standard used to measure Higher Heating Value. This data element is required. hhv.standardOfDevelopment 
NNNN051Industry standard used to measure Higher Heating Value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. hhv.standardOfDevelopmentOtherDesc 
NNNN052CO2 Emissions Factor. This data element is required. Please enter the required data. ef1.efValue 
NNNN053CO2 Emissions Factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef1.efValue 
NNNN055CO2 emissions factor. This data element is required. Please enter the required data or click CANCEL. ef1.isReporterSpecific 
NNNN056Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef1.daysSubstituteDataProceduresUsed 
NNNN057Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. ef1.daysSubstituteDataProceduresUsed 
NNNN059Industry standard used to measure CO2 emissions factor. This data element is required. ef1.standardOfDevelopment 
NNNN060Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef1.standardOfDevelopmentOtherDesc 
NNNN061Higher heating value. This data element is required. Please enter the required data. hhv.hhvValue 
NNNN062Higher heating value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. hhv.hhvValue 
NNNN068Higher heating value. This data element is required. Please enter the required data or click CANCEL. hhv.hhvValue 
NNNN069Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. hhv.daysSubstituteDataProceduresUsed 
NNNN070Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. hhv.daysSubstituteDataProceduresUsed 
NNNN072Industry standard used to measure Higher Heating Value. This data element is required. hhv.standardOfDevelopment 
NNNN073Industry standard used to measure Higher Heating Value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. hhv.standardOfDevelopmentOtherDesc 
NNNN074CO2 Emissions Factor. This data element is required. Please enter the required data. ef1.efValue 
NNNN075CO2 Emissions Factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef1.efValue 
NNNN081CO2 emissions factor. This data element is required. Please enter the required data or click CANCEL. ef1.isReporterSpecific 
NNNN082Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef1.daysSubstituteDataProceduresUsed 
NNNN083Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. ef1.daysSubstituteDataProceduresUsed 
NNNN085Industry standard used to measure CO2 emissions factor. This data element is required. ef1.standardOfDevelopment 
NNNN086Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef1.standardOfDevelopmentOtherDesc 
NNNN087CO2 quantities associated with Natural Gas Received at the City Gate(s). This data element is required. co2iEmissions.officialUnroundedCo2 
NNNN088CO2 quantities associated with Natural Gas Received at the City Gate(s). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2iEmissions.officialUnroundedCo2 
NNNN089What result do you want to report to EPA? This data element is required. Please make a selection or click CANCEL. co2iEmissions.isUserOverriddenCo2 
NNNN090What result do you want to report to EPA?. This data element is required. Please make a selection or click CANCEL. co2iEmissions.isUserOverriddenCo2 
NNNN091You selected "Enter my own result" but did not enter a value. Either enter a value or select "Use the calculated result rounded". co2iEmissions.officialUnroundedCo2 
NNNN092Report this value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2iEmissions.officialUnroundedCo2 
NNNN093Total annual volume of product received at the city gate(s). This data element is required. fuelVolumeNN1_NN2.fuelVolume 
NNNN094Total annual volume of product received at the city gate(s). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolumeNN1_NN2.fuelVolume 
NNNN096Days in reporting year for which substitute data procedures were used. This data element is required. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed 
NNNN097Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed 
NNNN099Industry standard used to measure the volume. This data element is required. fuelVolumeNN1_NN2.standardOfMeasure 
NNNN100Industry standard used to measure the volume. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelVolumeNN1_NN2.standardOfMeasureOtherDesc 
NNNN101Total annual volume of product supplied. This data element is required. fuelVolumeNN1_NN2.fuelVolume 
NNNN102Total annual volume of product supplied. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolumeNN1_NN2.fuelVolume 
NNNN108Days in reporting year for which substitute data procedures were used. This data element is required. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed 
NNNN109Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed 
NNNN111Industry standard used to measure the volume. This data element is required. fuelVolumeNN1_NN2.standardOfMeasure 
NNNN112Industry standard used to measure the volume. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelVolumeNN1_NN2.standardOfMeasureOtherDesc 
NNNN113CO2 emissions factor. This data element is required. Please enter the required data. ef2.efValue 
NNNN114CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef2.efValue 
NNNN116Emission Factor. This data element is required. Please enter the required data. ef2.isReporterSpecific 
NNNN117Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef2.daysSubstituteDataProceduresUsed 
NNNN118Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. ef2.daysSubstituteDataProceduresUsed 
NNNN120Industry standard used to measure CO2 emissions factor. This data element is required. ef2.standardOfDevelopment 
NNNN121Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef2.standardOfDevelopmentOtherDesc 
NNNN122CO2 emissions factor. This data element is required. Please enter the required data. ef2.efValue 
NNNN123CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef2.efValue 
NNNN129Emission Factor. This data element is required. Please enter the required data or click CANCEL. ef2.isReporterSpecific 
NNNN130Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef2.daysSubstituteDataProceduresUsed 
NNNN131Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. ef2.daysSubstituteDataProceduresUsed 
NNNN133Industry standard used to measure CO2 emissions factor. This data element is required. ef2.standardOfDevelopment 
NNNN134Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef2.standardOfDevelopmentOtherDesc 
NNNN135What result do you want to report to EPA?. This data element is required. Please make a selection or click CANCEL. co2iEmissions.isUserOverriddenCo2 
NNNN136CO2 quantities associated with Natural Gas Received at the City Gate(s). This data element is required. co2iEmissions.officialUnroundedCo2 
NNNN137CO2 quantities associated with Natural Gas Received at the City Gate(s). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2iEmissions.officialUnroundedCo2 
NNNN138What result do you want to report to EPA?. This data element is required. Please make a selection or click CANCEL. co2iEmissions.isUserOverriddenCo2 
NNNN139You selected "Enter my own result" but did not enter a value. Either enter a value or select "Use the calculated result rounded". co2iEmissions.officialUnroundedCo2 
NNNN140Report this value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2iEmissions.officialUnroundedCo2 
NNNN141Total annual volume of natural gas delivered to downstream pipelines and other LDCs. This data element is required. Please enter the required data. fuelVolumeNN3.fuelVolume 
NNNN142Total annual volume of natural gas delivered to downstream pipelines and other LDCs. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolumeNN3.fuelVolume 
NNNN144Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. fuelVolumeNN3.daysSubstituteDataProceduresUsed 
NNNN145Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. fuelVolumeNN3.daysSubstituteDataProceduresUsed 
NNNN147CO2 emissions factor. This data element is required. Please enter the required data. ef3.efValue 
NNNN148CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef3.efValue 
NNNN150EF. This data element is required. Please enter the required data or click CANCEL. ef3.isReporterSpecific 
NNNN151Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef3.daysSubstituteDataProceduresUsed 
NNNN152Number of days in the reporting year for which substitute data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. ef3.daysSubstituteDataProceduresUsed 
NNNN154Industry standard used to measure CO2 emissions factor. This data element is required. ef3.standardOfDevelopment 
NNNN155Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef3.standardOfDevelopmentOtherDesc 
NNNN156What result do you want to report to EPA? This data element is required. Please make a selection or click CANCEL. co2jEmissions.isUserOverriddenCo2 
NNNN157CO2 quantities associated with Natural Gas delivered to Transmission Pipelines or Other LDCs. This data element is required. co2jEmissions.officialUnroundedCo2 
NNNN158CO2 quantities associated with Natural Gas delivered to Transmission Pipelines or Other LDCs. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2jEmissions.officialUnroundedCo2 
NNNN159CO2 emissions factor. This data element is required. Please enter the required data. ef4.efValue 
NNNN160CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef4.efValue 
NNNN162EF. This data element is required. Please enter the required data or click CANCEL. ef4.isReporterSpecific 
NNNN163Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef4.daysSubstituteDataProceduresUsed 
NNNN164Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. ef4.daysSubstituteDataProceduresUsed 
NNNN166Industry standard used to measure CO2 emissions factor. This data element is required. ef4.standardOfDevelopment 
NNNN167Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef4.standardOfDevelopmentOtherDesc 
NNNN168You selected "Enter my own result" but did not enter a value. Either enter a value or select "Use the calculated result rounded". co2kEmissions.officialUnroundedCo2 
NNNN169Report this value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2kEmissions.officialUnroundedCo2 
NNNN170What result do you want to report to EPA? This data element is required. Please make a selection or click CANCEL. co2kEmissions.isUserOverriddenCo2 
NNNN171Annual volume of natural gas delivered to a large end-user\'s facility or the amount delivered to a specific meter located at a large end-user\'s facility. This data element is required. Please enter the required data. fuelVolume.fuelVolume 
NNNN172Annual volume of natural gas delivered to a large end-user\'s facility or the amount delivered to a specific meter located at a large end-user\'s facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolume.fuelVolume 
NNNN213GHG Quantities Calculation Methodology. This data element is required. Please make a selection or click CANCEL. calculationMethodology 
NNNN214Total annual volume of NGL product received. This data element is required. Please enter the required data. fuelVolumeNN7.fuelVolume 
NNNN215Total annual volume of NGL product supplied. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolumeNN7.fuelVolume 
NNNN221Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. fuelVolumeNN7.daysSubstituteDataProceduresUsed 
NNNN222Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. fuelVolumeNN7.daysSubstituteDataProceduresUsed 
NNNN224CO2 emissions factor. This data element is required. Please enter the required data. ef7.efValue 
NNNN225CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef7.efValue 
NNNN231EF. This data element is required. Please enter the required data or click CANCEL. ef7.isReporterSpecific 
NNNN232Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef7.daysSubstituteDataProceduresUsed 
NNNN233Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. ef7.daysSubstituteDataProceduresUsed 
NNNN235Industry standard used to measure CO2 emissions factor. This data element is required. ef7.standardOfDevelopment 
NNNN236Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef7.standardOfDevelopmentOtherDesc 
NNNN237What result do you want to report to EPA?. This data element is required. Please make a selection or click CANCEL. co2mEmissions.isUserOverriddenCo2 
NNNN238You selected "Enter my own result" but did not enter a value. Either enter a value or select "Use the calculated result rounded". co2mEmissions.officialUnroundedCo2 
NNNN239Report this value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2mEmissions.officialUnroundedCo2 
NNNN240GHG Emissions Calculation Methodology. This data element is required. Please make a selection or click CANCEL. calculationMethodology 
NNNN280Large End-User Name. This data element is required. Please enter the required data or click CANCEL. customerName 
NNNN281Large End-User Address. This data element is required. Please enter the required data. customerAddress 
NNNN282Meter Number. This data element is required. Please enter the required data. meterNumber 
NNNN400The annual GHG quantity for Subpart NN has not been reported. This data element is required pursuant to 40 CFR 98.3(c)(5)(ii). transientData['subpartNNAnnualCO2'] 
NNNN401The annual GHG quantity for Subpart NN has not been reported. This data element is required pursuant to 40 CFR 98.3(c)(5)(ii). transientData['subpartNNAnnualCO2'] 
NNNN403No NGL product has been reported for Subpart NN. nglProductMap['Ethane'] 
NNNN404The name of a supplied NGL product has not been reported. This data element is required. suppliedFuelName 
NNNN405The name of a received NGL product has not been reported. This data element is required. receivedFuelName 
NNNN407The GHG {1} is not valid for Subpart NN. Please check the value you entered and correct before continuing. transientData['gasName'] 
NNNN410More than one NGL fuel details have been reported for ethane. Please correct before continuing. transientData['ethaneSuppliedCount'] 
NNNN411More than one NGL fuel details have been reported for butane. Please correct before continuing. transientData['butaneSuppliedCount'] 
NNNN412More than one NGL fuel details have been reported for isobutane. Please correct before continuing. transientData['isobutaneSuppliedCount'] 
NNNN413More than one NGL fuel details have been reported for propane. Please correct before continuing. transientData['propaneSuppliedCount'] 
NNNN414More than one NGL fuel details have been reported for pentanes plus. Please correct before continuing. transientData['pentanesPlusSuppliedCount'] 
NNNN415The CO2 units of measure of {1} for Subpart NN is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['co2UOM'] 
NNNN416The units of measure for the GHG quantity calculated using Equation NN-1 for the NGL product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn1UOM_NGL'] 
NNNN417The units of measure for the GHG quantity calculated using Equation NN-2 for the NGL product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn2UOM_NGL'] 
NNNN418The units of measure for the GHG quantity calculated using Equation NN-7 for the NGL product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn7UOM'] 
NNNN419The units of measure for the GHG quantity calculated using Equation NN-1 for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn1UOM_LDC'] 
NNNN420The units of measure for the GHG quantity calculated using Equation NN-2 for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn2UOM_LDC'] 
NNNN421The units of measure for the GHG quantity calculated using Equation NN-3 for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn3UOM'] 
NNNN422The units of measure for the GHG quantity calculated using Equation NN-4 for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn4UOM'] 
NNNN423The units of measure for the GHG quantity calculated using Equation NN-5a for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn5aUOM'] 
NNNN424The units of measure for the GHG quantity calculated using Equation NN-5b for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn5bUOM'] 
NNNN425The annual GHG quantity calculated using equation NN-5a for the LDC has not been reported. This data element is required. transientData['annualCo2FromEquationNN5a'] 
NNNN426The annual GHG quantity calculated using equation NN-5b for the LDC has not been reported. This data element is required. transientData['annualCo2FromEquationNN5b'] 
NNNN470US State or Territory covered in this report. This data element is required. Please enter the required data. transientData['stateTerritoryCovered'] 
NNNN600You have not indicated your supplier type (natural gas local distribution company or fractionator of natural gas liquids). supplierCategory 
OIVT-O100aYou have not added any equation inputs data for the annual mass of HCFC-22 produced. Please use the Inputs Verifier Tool to enter equation inputs for the annual mass of HCFC-22 produced for this process. systemCalculatedUnroundedAnnualMass 
OIVT-O101aYou have not added any equation inputs data for the annual HFC-23 emissions from the Process (calculated using equation O-4). Please use the Inputs Verifier Tool to enter equation inputs for annual HFC-23 emissions from the process calculated using equation O-4. systemCalculatedUnroundedHFC23EqO4 
OO-001You have selected Subpart O for reporting, but you have not yet initiated it. isSetupInitiated 
OO-002Please indicate if the facility produces HCFC-22. This data element is required. doesFacilityProduceHCFC22 
OO-003Please indicate if the facility sends any HFC-23 offsite for destruction. This data element is required. doesFacilityDestroyHFCOffsite 
OO-004Please indicate if the facility destroys HFC-23 onsite. This data element is required. doesFacilityDestroyHFCOnsite 
OO-008You have indicated that your facility sends HFC-23 offsite for destruction but haven\'t added any Off-Site HFC-23 Destruction Facility Information. doesFacilityDestroyHFCOffsite 
OO-010You have indicated that your facility destroys HFC-23 onsite but haven\'t added any On-Site HFC-23 Destruction Process Information. doesFacilityDestroyHFCOnsite 
OO-012The combined mass of all materials other than HCFC-22 and HFC-23. This data element is required. combinedMassOfMaterialsRemoved 
OO-013aIndicate whether the annual mass of combined mass of all materials other than HCFC-22 and HFC-23 for the process is based on a missing data procedure. This data element is required. isAnnualMassBasedOnMDP 
OO-014aIf the annual mass of combined mass of all materials other than HCFC-22 and HFC-23 for the process is based on a missing data procedure then enter Number of hours that a missing data procedure was used. This data element is required. nOHMissingDataProcedureWasUsed 
OO-015Method for tracking startups, shutdowns, and malfunctions and HFC-23 generation/emissions during these events. This data element is required. trackingMethod 
OO-017Add reactants that are fed into the process. This data element is required. reactants 
OO-019aAnnual mass of HFC-23 emitted from all equipment leaks from the process. This data element is required. annualMassOfHFC23EquLeaks 
OO-020aWas the annual mass of HFC-23 emitted from all equipment leaks from the process based on a missing data procedure. This data element is required. isAnnualMassOfHFC23BasedOnMDPEquLeaks 
OO-021Number of hours a missing data procedure was used to determine the annual mass of HFC-23 emitted from all equipment leaks. This data element is required. numberOfHoursMDPWereUsedEquLeaks 
OO-022aAnnual mass of HFC-23 emitted from all process vents for the process. This data element is required. annualMassOfHFC23ProcessVents 
OO-023aWas the annual mass of HFC-23 emitted from all process vents for the process based on a missing data procedure. This data element is required. isAnnualMassOfHFC23BasedOnMDPProcessVents 
OO-024Number of hours a missing data procedure was used to determine the annual mass of HFC-23 emitted from all process vents. This data element is required. numberOfHoursMDPWereUsedProcessVents 
OO-026Reactant fed into the process. This data element is required. nameOfReactant 
OO-027Identify other reactant fed into the process. This data element is required. otherNameOfreactant 
OO-028Annual mass of reactant fed into the process. This data element is required. annualMassFedIntoReactant 
OO-029Indicate whether the annual mass of the reactant fed into the process is based on a missing data procedure. This data element is required. isAnnualMassBasedOnMDP 
OO-030Number of hours that a missing data procedure was used to determine the annual mass of the reactant fed into the process. This data element is required. numberOfHoursMDPWasUsed 
OO-031Facility Name. Please provide a unique name. facilityName 
OO-032Facility Name. This data element is required. facilityName 
OO-033Street Address. This data element is required. streetAddress 
OO-034City. This data element is required. city 
OO-035City. Please enter a valid city name. city 
OO-036State. This data element is required. state 
OO-037Zip/Postal Code. This data element is required. zip 
OO-038Zip/Postal Code. US Zip needs to be 5 or 10 numbers. zip 
OO-039Quantity of HFC-23 sent to this facility. This data element is required. quantityofHFC23 
OO-040Is the quantity of HFC-23 sent to this facility based on a missing data procedure. This data element is required. isQuantityofHFC23BasedOnMDP 
OO-041Number of hours a missing data procedure was used to determine the quantity of HFC-23 sent to this facility. This data element is required. noOfHrsMDPUsedForQuantityofHFC23 
OO-042Unit Name. This data element is required. unitName 
OO-043Unit Description. This data element is required. unitDescription 
OO-044Is the annual mass of HFC-23 fed into the destruction device at the facility based on a missing data procedure. This data element is required. isAnnualMassOfHFCFedBasedOnMDP 
OO-045Number of hours a missing data procedure was used to determine the annual mass of HFC-23 fed into the destruction device. This data element is required. noOfHrsAnnualMassOfHFCFedBasedOnMDP 
OO-046Is the annual mass of HFC-23 emitted from the destruction device at the facility based on a missing data procedure. This data element is required. isAnnualMassOfHFCEmittedBasedOnMDP 
OO-047Number of hours a missing data procedure was used to determine the annual mass of HFC-23 emitted from the destruction device. This data element is required. noOfHrsAnnualMassOfHFCEmittedBasedOnMDP 
OO-048Concentration of HFC-23 measured at the outlet of the destruction device during the facility\'s annual HFC-23 concentration measurements at the outlet of the device. This data element is required. concentrationOfHFC23Measured 
OO-050Detection limit concentration. This data element is required. detectionLimitConcentration 
OO-051Detection limit concentration units. This data element is required. concentrationUnits 
OO-052Was the HFC-23 concentration measured pursuant to §98.154(l) greater than that measured during the performance test that was the basis for the destruction efficiency. This data element is required. isConGTPerformanceTest 
OO-058Methods used to determine destruction efficiency. This data element is required. methodsUsedToDetermineDE 
OO-059Methods used to record the mass of HFC-23 destroyed. This data element is required. methodsUsedToRecordMassOfHFC23Destroyed 
OO-060Name of other relevant federal or state regulations that may apply to the destruction process. This data element is required. nameOfOtherFederalOrStateReg 
OO-062Unit Name. Please provide a unique name. unitName 
OO-063For the "Indication if the facility produces HCFC-22," "Indication if the facility sends any HFC-23 offsite for destruction," and "Indication if the facility destroys HFC-23 onsite," all 3 cannot be selected as NO. doesFacilityProduceHCFC22 
OO-064Parameter for which missing data were used. This data element is required. parameterMissingDataUsed 
OO-065Other parameter. This data element is required. otherParameterMissingData 
OO-066Other parameter should be maximum 200 characters long. otherParameterMissingData 
OO-067Equipment Leaks, EL (part of Equation O-5): Parameter for which missing data were used. This data element is required. parameterEquLeaks 
OO-068Equipment Leaks, EL (part of Equation O-5): Other parameter. This data element is required. otherParameterEquLeaks 
OO-069Equipment Leaks, EL (part of Equation O-5): Other parameter should be maximum 200 characters long. otherParameterEquLeaks 
OO-070Process Vents, EPV (part of Equation O-5): Parameter for which missing data were used. This data element is required. parameterProcessVents 
OO-071Process Vents, EPV (part of Equation O-5): Other parameter. This data element is required. otherParameterProcessVents 
OO-072Process Vents, EPV (part of Equation O-5): Other parameter should be maximum 200 characters long. otherParameterProcessVents 
OO-073Parameter for which missing data were used. This data element is required. parameterMissingDataProcedure 
OO-074Other parameter. This data element is required. otherParameterMissingDataProcedure 
OO-075Other parameter should be maximum 200 characters long. otherParameterMissingDataProcedure 
OO-076HFC-23 Fed into the Destruction Device: Parameter for which missing data were used. This data element is required. parameterFedIntoDestructionDevice 
OO-077HFC-23 Fed into the Destruction Device: Other parameter. This data element is required. otherParameterFedIntoDestructionDevice 
OO-078HFC-23 Fed into the Destruction Device: Other parameter should be maximum 200 characters long. otherParameterFedIntoDestructionDevice 
OO-079HFC-23 emitted from the Destruction Device: Parameter for which missing data were used. This data element is required. parameterEmittedFromDestructionDevice 
OO-080HFC-23 emitted from the Destruction Device: Other parameter. This data element is required. otherParameterEmittedFromDestructionDevice 
OO-081HFC-23 emitted from the Destruction Device: Other parameter should be maximum 200 characters long. otherParameterEmittedFromDestructionDevice 
OO-082Indicate the method used to calculate the revised destruction efficiency, specifying whether §98.154(l)(1) or (2) was used. This data element is required. revisedDestructionEfficiencyCalculationMethod 
OO-083You have indicated that your facility produces HCFC-22 but have not added any HCFC-22 Production Process Information doesFacilityProduceHCFC22 
OO-084Unique Product Process Name/ID. This data element is required. productProcessNameOrId 
OO-085Please indicate how your HFC-23 emissions are estimated. This data element is required. areHFC23EmissionsBasedOnEquO4 
OO-086Unique Product Process Name/ID. Please provide a unique Name/ID. productProcessNameOrId 
OO-089Was the HFC-23 fed into the on-site destruction process originally generated by an on-site HCFC-22 production process? This data element is required. Please enter the required data or click CANCEL. eqO8HFCAddedToTotalEmissions 
OO-094You have indicated this production process uses a destruction device that is connected to the HCFC-22 production equipment, but haven\'t added a destruction device. transientData['foundDesDevice'] 
OOGHG-ADD-1The greenhouse gas you are attempting to add is invalid because it already exists on the selection list provided, or you are attempting to add "carbon dioxide" or "methane" which are not applicable to Subpart OO reporting. Please enter a unique greenhouse gas, or click CANCEL. ghgExists 
OOGHG-ADD-3The greenhouse gas you are attempting to add is invalid because it has a chemical formula of "CO2", "CH4", "N2O", "CF4", "C2F6" or "CHF3". Greenhouse gases with these chemical formulas cannot be added as an "other" gas. Please enter a unique greenhouse gas, or click CANCEL. ghgInvalidFormula 
OOOO-006You have not uploaded a reporting form file. jctSubPartFacility 
OOOO0251Chemical Formula: Chemical Formula must be reported if an Other F-GHG is listed in Column O. (Exports Tab, Column Q) chemicalFormula 
OOOO0252Chemical Formula: Chemical Formula must be reported if an Other GHG is listed in Column I. (Imports Tab, Column K) chemicalFormula 
OOOO0253Chemical Formula: Chemical Formula must be reported if an Other F-GHG is listed in Column L. (Import Destruction Tab, Column N) chemicalFormula 
OOOO0254Chemical Formula: Chemical Formula must be reported if an Other F-GHG is listed in Column J. (Import Transformation Tab, Column L) chemicalFormula 
OOOO0255Chemical Formula must be reported if an Other F-GHG is listed in Column F. (Offsite Destruction Tab, Part 5b, Column H) chemicalFormula 
OOOO0256Chemical Formula must be reported if an Other F-GHG is listed in Column F. (Offsite Destruction Tab, Part 4b, Column H) chemicalFormula 
OOOO0257Chemical Formula: Chemical Formula must be reported of an Other F-GHG is listed in Column E. (Onsite Destruction Tab, Column G) chemicalFormula 
OOOO0258Chemical Formula must be reported if an Other GHG is listed in Column F. (Onsite Transformation Tab, Column H) chemicalFormula 
OOOO0259Chemical Formula: Chemical Formula must be reported if an Other F-GHG is listed in Column F. (Products Tab, Column H) chemicalFormula 
OOOO0260Does the process transform a GHG produced at an off-site location. A Yes or No response is required for this data element. (Processes Tab, Column F) processTransformIndicator 
OOOO0261Was the mass determined using a missing data procedure? A Yes or No response is required for this data element. (Onsite Transformation Tab, Column L) massMissingProcedureInd 
OOOO0262Was any of the mass that was fed into the transformation process determined using a missing data procedure? A Yes or No response is required for this data element. (Onsite Transformation Tab, Column L) massFedMissingProcedureInd 
OOOO0263Was the F-GHG or F-HTF mass determined using a missing data procedure? A Yes or No response is required for this data element. (Onsite Destruction Tab, Column K) massMissingProcedureInd 
OOOO0264You have entered a blend name on the [Imports tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. importedN2OorFGHG 
OOOO0265You have entered a blend name on the [Imports tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. importedN2OorFGHGExtended 
OOOO0266You have entered a blend name on the [Import Destruction tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. destroyedFGHG 
OOOO0267You have entered a blend name on the [Import Destruction tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. destroyedFGHGExtended 
OOOO0268You have entered a blend name on the [Import Transformation tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. transferredFGHG 
OOOO0269You have entered a blend name on the [Import Transformation tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. transferredFGHGExtended 
OOOO0270You have entered a blend name on the [Exports tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. fghgDestroyedSoldTransferred 
OOOO0271You have entered a blend name on the [Exports tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. fghgDestroyedSoldTransExtended 
PALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
PALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
PCEMSML-1Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML 
PCEMSML-2CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit.  hasCEMSandNoCMLUnits 
PCEMSML-3The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml 
PCML-027aFraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions 
PCML-038Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs 
PCML-039The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt 
PCML-040The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow 
PCML-041The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture 
PCML-043The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow 
PCML-046CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits 
PCML-047aFraction of methane emissions from CML. This data element is required. fractionCh4Emissions 
PCML-051Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission 
PCML-052Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission 
PCML-053Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission 
PCML-054Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission 
PCML-055Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required./GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMStotalCo2ByCemsOrPart75If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue>
PCML-056Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 
PCML-057Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs 
PCML-058The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt 
PCML-059You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate 
PCML-060Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate 
PCML-061Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType 
PCML-062Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate 
PCML-063Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
PCML-064Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] 
PCML-065Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
PCML-066Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] 
PCML-067Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
PCML-068Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] 
PCML-069Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
PCML-070Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] 
PCML-071CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName 
PCML-072Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted 
PCML-076Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission 
PCML-077Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission 
PCML-078Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted 
PCML-083Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions 
PCML-086The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
PCML-087The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate 
PCML-088The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
PCML-089The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate 
PIVT-P101The annual quantity of {1} (metric tons) reported for the gaseous fuel or feedstock {2} does not match the sum of the monthly quantities entered into the Inputs Verifier Tool for this fuel or feedstock, which was calculated as {3} (metric tons). Please review the annual and monthly quantities, noting the units of measure and correct this critical error. transientData['annualFeedstockConsumed'] 
PIVT-P102The annual quantity of {1} (metric tons) reported for the liquid fuel or feedstock {2} does not match the sum of the monthly quantities entered into the Inputs Verifier Tool for this fuel or feedstock, which was calculated as {3} (metric tons). Please review the annual and monthly quantities, noting the units of measure and correct this critical error. transientData['annualFeedstockConsumed'] 
PIVT-P103The annual quantity of {1} (metric tons) reported for the solid fuel or feedstock {2} does not match the sum of the monthly quantities entered into the Inputs Verifier Tool for this fuel or feedstock, which was calculated as {3} (metric tons). Please review the annual and monthly quantities, noting the units of measure and correct this critical error. transientData['annualFeedstockConsumed'] 
PP001Please make a selection or click CANCEL. hasCEMS 
PP002Annual quantity of carbon other than CO2 collected and transferred off site in either gas, liquid, or solid forms, excluding methanol. This data element is required. annualOtherCarbonTransferred 
PP003Annual quantity of carbon other than CO2 collected and transferred off site in eiher gas, liquid, or solid forms, excluding methanol. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualOtherCarbonTransferred 
PP005Feedstock Name. This data element is required. Please enter the required data or click CANCEL. feedstockName 
PP006Feedstock Type. This data element is required. feedstockType 
PP011Hydrogen Produced. This data element is required. If no hydrogen was produced in the reporting year, please enter 0. hydrogenProduced 
PP012Hydrogen Produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. hydrogenProduced 
PP014Annual quantity of ammonia intentionally produced as a desired product, if applicable. This data element is required. If no ammonia was intentionally produced as a desired product in the reporting year, please enter 0. ammoniaProduced 
PP015Annual quantity of ammonia intentionally produced as a desired product, if applicable. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ammoniaProduced 
PP018You have not yet added a fuel or feedstock for this unit. feedstocks 
PP019Annual quantity of ammonia intentionally produced as a desired product, if applicable. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ammoniaProduced 
PP020Hydrogen Produced. This data element is required. If no hydrogen was produced in the reporting year, please enter 0. hydrogenProduced 
PP022Hydrogen Produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. hydrogenProduced 
PP023Annual quantity of ammonia intentionally produced as a desired product, if applicable. This data element is required. If no ammonia was produced in the reporting year, please enter 0. ammoniaProduced 
PP100The annual CO2 emissions for Subpart P [{1} (metric tons)] does not equal the sum of the CO2 emissions for all the units [{2} (metric tons)]. Please address this critical error. Then you can return here to perform another final review and submit your report. data[subpartPAnnualCO2] 
PP206You have selected Subpart P for reporting, but you have not yet added a unit. groupUnit 
PP211Other feedstock name. This data element is required. Please enter the required data, select a feedstock name from the list provided, or click CANCEL. otherFeedstockName 
PP212You have selected an unexpected feedstock type based on the feedstock name selected. For the feedstock name "Natural Gas" in unit {1}, you have selected {2} but the expected type for this feedstock is "gaseous feedstock". Please double check these values and revise, if necessary. If you determine the values are correct, please submit them as is. feedstockName 
PP213You have selected an unexpected feedstock type based on the feedstock name selected. For the feedstock name "Refinery Fuel Gas" in unit {1}, you have selected {2} but the expected type for this feedstock is "gaseous feedstock". Please double check these values and revise, if necessary. If you determine the values are correct, please submit them as is. feedstockName 
PP214You have selected an unexpected feedstock type based on the feedstock name selected. For the feedstock name "Brine" in unit {1}, you have selected {2} but the expected type for this feedstock is "liquid feedstock". Please double check these values and revise, if necessary. If you determine the values are correct, please submit them as is. feedstockName 
PUM-2Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitName 
PUM-3Unit type. This data element is required. Please enter the required data or click CANCEL.GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentNamegroupUnitType 
PPALL0001CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] 
PPALL0002Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] 
PPPP001Quarterly flow rate measurement, for quarter(s) [{1}]. This data element is required. flowRate 
PPPP002Quarterly flow rate measurement, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. flowRate 
PPPP013Eq. PP-1 official emissions value unrounded. This data element is required. co2Emissions.officialUnroundedCo2 
PPPP014Eq. PP-1 official emissions value unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2Emissions.officialUnroundedCo2 
PPPP016Eq. PP-1 override value indicator. This data element is required. Please make a selection or click CANCEL. co2Emissions.isUserOverriddenCo2 
PPPP017Eq. PP-2 official emissions value rounded. This data element is required. co2Emissions.officialUnroundedCo2 
PPPP018Eq. PP-2 official emissions value rounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2Emissions.officialUnroundedCo2 
PPPP020Eq. PP-2 override value indicator. This data element is required. Please make a selection or click CANCEL. co2Emissions.isUserOverriddenCo2 
PPPP021Unit type (flow meter or CO2 stream). This data element is required. unitType 
PPPP022Measurement type. This data element is required. measurementType 
PPPP023Total extracted CO2, unrounded. This data element is required. extractedUnroundedCo2 
PPPP024Total extracted CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. extractedUnroundedCo2 
PPPP026Total imported CO2, unrounded. This data element is required. importedUnroundedCo2 
PPPP027Total imported CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. importedUnroundedCo2 
PPPP029Total exported CO2, unrounded. This data element is required. exportedUnroundedCo2 
PPPP030Total exported CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. exportedUnroundedCo2 
PPPP032Quarterly flow rate measurement, for quarter(s) [{1}]. This data element is required. flowRate 
PPPP033Quarterly flow rate measurement, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. flowRate 
PPPP044Quarterly CO2 concentration measurement for quarter(s) [{1}]. This data element is required. concentration 
PPPP045Quarterly CO2 concentration measurement for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing. concentration 
PPPP056Quarterly CO2 or CO2 stream density measurement, for quarter(s) [{1}]. This data element is required. density 
PPPP057Quarterly CO2 or CO2 stream density measurement, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. density 
PPPP068Quarterly CO2 concentration measurement, for quarter(s) [{1}]. This data element is required. concentration 
PPPP069Quarterly CO2 concentration measurement, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing. concentration 
PPPP080Annual quantity of CO2 transferred to food and beverage. This data element is required. annualFoodAndBeverageCo2 
PPPP081Annual quantity of CO2 transferred to food and beverage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFoodAndBeverageCo2 
PPPP083Annual quantity of CO2 transferred to industrial and municipal water/wastewater treatment. This data element is required. annualWaterTreatmentCo2 
PPPP084Annual quantity of CO2 transferred to industrial and municipal water/wastewater treatment. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualWaterTreatmentCo2 
PPPP086Annual quantity of CO2 transferred to metal fabrication, including welding and cutting. This data element is required. annualMetalFabricationCo2 
PPPP087Annual quantity of CO2 transferred to metal fabrication, including welding and cutting. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualMetalFabricationCo2 
PPPP089Annual quantity of CO2 transferred to greenhouse uses for plant growth. This data element is required. annualPlantGrowthCo2 
PPPP090Annual quantity of CO2 transferred to greenhouse uses for plant growth. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualPlantGrowthCo2 
PPPP092Annual quantity of CO2 transferred to fumigants (e.g., grain storage) and herbicides. This data element is required. annualFumigantCo2 
PPPP093Annual quantity of CO2 transferred to fumigants (e.g., grain storage) and herbicides. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFumigantCo2 
PPPP095Annual quantity of CO2 transferred to pulp and paper. This data element is required. annualPulpAndPaperCo2 
PPPP096Annual quantity of CO2 transferred to pulp and paper. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualPulpAndPaperCo2 
PPPP098Annual quantity of CO2 transferred to cleaning and solvent use. This data element is required. annualCleaningAndSolventCo2 
PPPP099Annual quantity of CO2 transferred to cleaning and solvent use. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualCleaningAndSolventCo2 
PPPP101Annual quantity of CO2 transferred to fire fighting. This data element is required. annualFirefightingCo2 
PPPP102Annual quantity of CO2 transferred to fire fighting. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFirefightingCo2 
PPPP104Annual quantity of CO2 transferred to transportation and storage of explosives. This data element is required. annualExplosivesCo2 
PPPP105Annual quantity of CO2 transferred to transportation and storage of explosives. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExplosivesCo2 
PPPP113Annual quantity of CO2 transferred to research and development. This data element is required. annualResearchAndDevelopmentCo2 
PPPP114Annual quantity of CO2 transferred to research and development. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualResearchAndDevelopmentCo2 
PPPP119Number of days for which substitute data procedures were used to measure CO2 mass or volume. This data element is required. massVolumeSubstituteDays 
PPPP120Number of days for which substitute data procedures were used to measure CO2 mass or volume. You must enter a value that is greater than or equal to zero and less than or equal to 366. You must correct the current value before continuing. massVolumeSubstituteDays 
PPPP122Number of days for which substitute data procedures were used to measure CO2 concentration. This data element is required. concentrationSubstituteDays 
PPPP123Number of days for which substitute data procedures were used to measure CO2 concentration. You must enter a value that is greater than or equal to zero and less than or equal to 366. You must correct the current value before continuing. concentrationSubstituteDays 
PPPP125Number of days for which substitute data procedures were used to measure CO2 stream density. This data element is required. densitySubstituteDays 
PPPP126Number of days for which substitute data procedures were used to measure CO2 stream density. You must enter a value that is greater than or equal to zero and less than 366. You must correct the current value before continuing. densitySubstituteDays 
PPPP128Equipment type name. This data element is required. equipmentTypeName 
PPPP129Equipment type name. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. equipmentTypeOtherDesc 
PPPP130Unit type (flow meter or CO2 stream). This data element is required. unitType 
PPPP131Measurement type. This data element is required. measurementType 
PPPP132Flow meter location. This data element is required. flowMeterLocation 
PPPP133Was the CO2 metered by the flow meter imported or exported? This data element is required. co2ImportedOrExported 
PPPP134Percent of CO2 that is biomass-based. This data element is required. biomassBasedPercent 
PPPP136Percent of CO2 that is biomass-based. This value should be reported as a percentage, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. biomassBasedPercent 
PPPP137Is any dehydration equipment located downstream of the flow meter? This data element is required. isDehydrationEquipmentDownstream 
PPPP138Is any dehydration equipment located upstream of the flow meter? This data element is required. isDehydrationEquipmentUpstream 
PPPP139Is any compression equipment located downstream of the flow meter? This data element is required. isCompressionEquipmentDownstream 
PPPP140Is any compression equipment located upstream of the flow meter? This data element is required. isCompressionEquipmentUpstream 
PPPP141Is any other processing equipment located downstream of the flow meter? This data element is required. isOtherEquipmentDownstream 
PPPP142Is any other processing equipment located upstream of the flow meter? This data element is required. isOtherEquipmentUpstream 
PPPP143Subpart PP Calculation Methodology. This data element is required. calculationMethodology 
PPPP144Subpart PP Supplier Type. This data element is required. supplierCategory 
PPPP145Total imported CO2, unrounded. This data element is required. importedUnroundedCo2 
PPPP146Total imported CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. importedUnroundedCo2 
PPPP148Total exported CO2, unrounded. This data element is required. exportedUnroundedCo2 
PPPP149Total exported CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. exportedUnroundedCo2 
PPPP150Standard used to measure CO2 Density. This data