Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| CODE | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| ALL0001 | UU | Data Quality | CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. |
| ALL0002 | UU | Data Quality | Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. |
| UU0006 | UU | Data Completeness | Sources of CO2 Received. This data element is required. |
| UU0007 | UU | Screen Error | Type. This data element is required. |
| UU0008 | UU | Screen Error | Measurement Type. This data element is required. |
| UU0009 | UU | Screen Error | Flow Meter Name or Identifier. This data element is required. |
| UU001 | UU | Data Completeness | You have selected Subpart UU for reporting, but you have not yet added a flow meter or container. |
| UU0010 | UU | Data Completeness | Total net mass of CO2 received annually. This data element is required. |
| UU0014 | UU | Data Completeness | Volumetric flow through the receiving flow meter in Q1. This data element is required. |
| UU0015 | UU | Screen Error | Volumetric flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0017 | UU | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter in Q1. This data element is required. |
| UU0018 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0019 | UU | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. |
| UU0022 | UU | Data Completeness | Volumetric flow through the receiving flow meter in Q2. This data element is required. |
| UU0023 | UU | Screen Error | Volumetric flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0025 | UU | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter in Q2. This data element is required. |
| UU0026 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0027 | UU | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. |
| UU0030 | UU | Data Completeness | Volumetric flow through the receiving flow meter in Q3. This data element is required. |
| UU0031 | UU | Screen Error | Volumetric flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0033 | UU | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter in Q3. This data element is required. |
| UU0034 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0035 | UU | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. |
| UU0038 | UU | Data Completeness | Volumetric flow through the receiving flow meter in Q4. This data element is required. |
| UU0039 | UU | Screen Error | Volumetric flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0041 | UU | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter in Q4. This data element is required. |
| UU0042 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0043 | UU | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. |
| UU0045 | UU | Data Completeness | Mass flow through the receiving flow meter in Q1. This data element is required. |
| UU0046 | UU | Screen Error | Mass flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0048 | UU | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter in Q1. This data element is required. |
| UU0049 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0050 | UU | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required |
| UU0052 | UU | Data Completeness | Mass flow through the receiving flow meter in Q2. This data element is required. |
| UU0053 | UU | Screen Error | Mass flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0055 | UU | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter in Q2. This data element is required. |
| UU0056 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0057 | UU | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required |
| UU0059 | UU | Data Completeness | Mass flow through the receiving flow meter in Q3. This data element is required. |
| UU0060 | UU | Screen Error | Mass flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0062 | UU | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter in Q3. This data element is required. |
| UU0063 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0064 | UU | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required |
| UU0066 | UU | Data Completeness | Mass flow through the receiving flow meter in Q4. This data element is required. |
| UU0067 | UU | Screen Error | Mass flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0069 | UU | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter in Q4. This data element is required. |
| UU0070 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0071 | UU | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required |
| UU0073 | UU | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q1. This data element is required. |
| UU0074 | UU | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0076 | UU | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q1. This data element is required. |
| UU0077 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0078 | UU | Data Completeness | Were substitute data procedures used in Q1 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. |
| UU0079 | UU | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q2. This data element is required. |
| UU0080 | UU | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0082 | UU | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q2. This data element is required. |
| UU0083 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0084 | UU | Data Completeness | Were substitute data procedures used in Q2 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. |
| UU0085 | UU | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q3. This data element is required. |
| UU0086 | UU | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0088 | UU | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q3. This data element is required. |
| UU0089 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0090 | UU | Data Completeness | Were substitute data procedures used in Q3 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. |
| UU0091 | UU | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q4. This data element is required. |
| UU0092 | UU | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0094 | UU | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q4. This data element is required. |
| UU0095 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0096 | UU | Data Completeness | Were substitute data procedures used in Q4 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. |
| UU0097 | UU | Data Completeness | Mass of contents in the container in Q1. This data element is required. |
| UU0098 | UU | Screen Error | Mass of contents in the container in Q1. This data element is required. |
| UU0100 | UU | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q1. This data element is required. |
| UU0101 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0102 | UU | Data Completeness | Were substitute data procedures used in Q1 to calculate the mass of contents in the container. This data element is required. |
| UU0103 | UU | Data Completeness | Mass of contents in the container in Q2. This data element is required. |
| UU0104 | UU | Screen Error | Mass of contents in the container in Q2. This data element is required. |
| UU0106 | UU | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q2. This data element is required. |
| UU0107 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0108 | UU | Data Completeness | Were substitute data procedures used in Q2 to calculate the mass of contents in the container. This data element is required. |
| UU0109 | UU | Data Completeness | Mass of contents in the container in Q3. This data element is required. |
| UU0110 | UU | Screen Error | Mass of contents in the container in Q3. This data element is required. |
| UU0112 | UU | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q3. This data element is required. |
| UU0113 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0114 | UU | Data Completeness | Were substitute data procedures used in Q3 to calculate the mass of contents in the container. This data element is required. |
| UU0115 | UU | Data Completeness | Mass of contents in the container in Q4. This data element is required. |
| UU0116 | UU | Screen Error | Mass of contents in the container in Q4. This data element is required. |
| UU0118 | UU | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q4. This data element is required. |
| UU0119 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0120 | UU | Data Completeness | Were substitute data procedures used in Q4 to calculate the mass of contents in the container. This data element is required. |
| UU0121 | UU | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1 . This data element is required. |
| UU0122 | UU | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0124 | UU | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1 . This data element is required. |
| UU0125 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0126 | UU | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0128 | UU | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2 . This data element is required. |
| UU0129 | UU | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0131 | UU | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2 . This data element is required. |
| UU0132 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0133 | UU | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0135 | UU | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3 . This data element is required. |
| UU0136 | UU | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0138 | UU | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| UU0139 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0140 | UU | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0142 | UU | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| UU0143 | UU | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0145 | UU | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| UU0146 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0147 | UU | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0149 | UU | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| UU0150 | UU | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0152 | UU | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| UU0153 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0154 | UU | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0156 | UU | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| UU0157 | UU | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0159 | UU | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| UU0160 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0161 | UU | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0163 | UU | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| UU0164 | UU | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0166 | UU | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| UU0167 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0168 | UU | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0170 | UU | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| UU0171 | UU | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0173 | UU | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| UU0174 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0175 | UU | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0177 | UU | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| UU0178 | UU | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0180 | UU | Data Completeness | Were substitute data procedures used in Q1 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0181 | UU | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| UU0182 | UU | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0184 | UU | Data Completeness | Were substitute data procedures used in Q2 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0185 | UU | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| UU0186 | UU | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0188 | UU | Data Completeness | Were substitute data procedures used in Q3 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0189 | UU | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| UU0190 | UU | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0192 | UU | Data Completeness | Were substitute data procedures used in Q4 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0193 | UU | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| UU0194 | UU | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0196 | UU | Data Completeness | Were substitute data procedures used in Q1 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0197 | UU | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| UU0198 | UU | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0200 | UU | Data Completeness | Were substitute data procedures used in Q2 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0201 | UU | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| UU0202 | UU | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0204 | UU | Data Completeness | Were substitute data procedures used in Q3 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0205 | UU | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| UU0206 | UU | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| UU0208 | UU | Data Completeness | Were substitute data procedures used in Q4 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| UU0209 | UU | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| UU0210 | UU | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0212 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| UU0213 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0214 | UU | Data Completeness | Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0215 | UU | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| UU0216 | UU | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0218 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| UU0219 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0220 | UU | Data Completeness | Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0221 | UU | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| UU0222 | UU | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0224 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| UU0225 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0226 | UU | Data Completeness | Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0227 | UU | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| UU0228 | UU | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0230 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| UU0231 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0232 | UU | Data Completeness | Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0233 | UU | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| UU0234 | UU | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0236 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| UU0237 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0238 | UU | Data Completeness | Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0239 | UU | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| UU0240 | UU | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0242 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| UU0243 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0244 | UU | Data Completeness | Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0245 | UU | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| UU0246 | UU | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0248 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| UU0249 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0250 | UU | Data Completeness | Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0251 | UU | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| UU0252 | UU | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0254 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| UU0255 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0256 | UU | Data Completeness | Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0257 | UU | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| UU0258 | UU | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0260 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| UU0261 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0262 | UU | Data Completeness | Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0263 | UU | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| UU0264 | UU | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0266 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| UU0267 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0268 | UU | Data Completeness | Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0269 | UU | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| UU0270 | UU | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0272 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| UU0273 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0274 | UU | Data Completeness | Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0275 | UU | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| UU0276 | UU | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0278 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| UU0279 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0280 | UU | Data Completeness | Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0281 | UU | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| UU0282 | UU | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0284 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| UU0285 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0286 | UU | Data Completeness | Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0287 | UU | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| UU0288 | UU | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0290 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| UU0291 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0292 | UU | Data Completeness | Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0293 | UU | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| UU0294 | UU | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0296 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| UU0297 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0298 | UU | Data Completeness | Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0299 | UU | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| UU0300 | UU | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| UU0302 | UU | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| UU0303 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0304 | UU | Data Completeness | Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| UU0305 | UU | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| UU0306 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0307 | UU | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| UU0308 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0309 | UU | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| UU0310 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0311 | UU | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q4 . This data element is required. |
| UU0312 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0313 | UU | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| UU0314 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0315 | UU | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| UU0316 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0317 | UU | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| UU0318 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0319 | UU | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| UU0320 | UU | Data Completeness | Other Standard or Method. This data element is required. |
| UU0400 | UU | Screen Error | Total net mass of CO2 received annually. This data element is required. |
| UU0420 | UU | Data Completeness | You have not identified the purpose of CO2 Injection. This is a required data element (40 CFR 98.476(e)). You must choose one purpose from the following options: (1) Geologic Sequestration Research & Development Exemption from reporting under Subpart RR; (2) to enhance the recovery of oil; (3) to enhance the recovery of natural gas; (4) for acid gas disposal; or (5) for another purpose (if choosing other, report the purpose). |
| UU0421 | UU | Data Completeness | You have selected "The facility includes a well or group of wells where a CO2 stream was injected for a purpose other than those listed" as the purpose of CO2 injection, however you have not specified the purpose. This is a required data element (40 CFR 98.476(e)). |
Overview
Content Tools
ThemeBuilder
Tasks