Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| CODE | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| ALL0001 | Y | Data Quality | CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. |
| ALL0002 | Y | Data Quality | Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. |
| CEMSML-1 | Y | Data Completeness | Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). |
| CEMSML-2 | Y | Data Completeness | CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. |
| CML-001 | Y | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-002 | Y | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-007 | Y | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-007X | Y | Screen Error | Total carbon dioxide (CO2) emissions measured by the CEMS (or applicable Part 75 methodology). This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-012 | Y | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. |
| CML-013 | Y | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-014 | Y | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-016 | Y | Screen Error | Carbon dioxide emissions in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-018 | Y | Screen Error | Carbon dioxide emissions in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-020 | Y | Screen Error | Carbon dioxide emissions in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-022 | Y | Screen Error | Carbon dioxide emissions in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-027a | Y | Data Completeness | Fraction of nitrous oxide emissions from CML. This data element is required. |
| CML-029 | Y | Screen Error | Carbon dioxide emissions attributable to process. This data element is required. |
| CML-031 | Y | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required. |
| CML-034 | Y | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-035 | Y | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-036 | Y | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-037 | Y | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-038 | Y | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-039 | Y | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-040 | Y | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-041 | Y | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-043 | Y | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. |
| CML-046 | Y | Data Completeness | CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. |
| CML-047a | Y | Data Completeness | Fraction of methane emissions from CML. This data element is required. |
| CML-051 | Y | Data Completeness | Total Non-biogenic carbon dioxide emissions. This data element is required. |
| CML-052 | Y | Data Completeness | Total Biogenic carbon dioxide emissions. This data element is required. |
| CML-053 | Y | Data Completeness | Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-054 | Y | Data Completeness | Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-055 | Y | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-056 | Y | Screen Error | Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-057 | Y | Data Completeness | Total number of source operating hours in the reporting year. This data element is required. |
| CML-058 | Y | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. |
| CML-059 | Y | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is less than the End Date. |
| CML-060 | Y | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-061 | Y | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-062 | Y | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-063 | Y | Data Completeness | Carbon dioxide emissions measured in Quarter 1. This data element is required. |
| CML-064 | Y | Screen Error | Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-065 | Y | Data Completeness | Carbon dioxide emissions measured in Quarter 2. This data element is required. |
| CML-066 | Y | Screen Error | Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-067 | Y | Data Completeness | Carbon dioxide emissions measured in Quarter 3. This data element is required. |
| CML-068 | Y | Screen Error | Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-069 | Y | Data Completeness | Carbon dioxide emissions measured in Quarter 4. This data element is required. |
| CML-070 | Y | Screen Error | Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-071 | Y | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-072 | Y | Data Completeness | Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-073 | Y | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-074 | Y | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-075 | Y | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-076 | Y | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-077 | Y | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-078 | Y | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-082 | Y | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-083 | Y | Screen Error | Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. |
| CML-086 | Y | Screen Error | The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-087 | Y | Screen Error | The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-088 | Y | Screen Error | The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| CML-089 | Y | Screen Error | The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| IVT-Y0001 | Y | Screen Error | Unit "{1}" was found in the inputs data but not in the GHG report data. |
| IVT-Y0002 | Y | Screen Error | Unit "{1}" was found in the GHG report data but not in the inputs data. |
| IVT-Y03201 | Y | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y03202 | Y | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y03203 | Y | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y0800 | Y | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from this fluid catalytic cracking unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Y0802 | Y | Screen Error | Enter Own result for Annual CO2 emissions from fluid catalytic cracking unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y0803 | Y | Screen Error | Annual throughput of unit from company records. This data element is required. Please enter the required data. |
| IVT-Y0804 | Y | Screen Error | Annual throughput of unit from company records. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be between 0 and 73,000,000 , barrels/year). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y0806 | Y | Screen Error | Coke burn-off factor from engineering calculations. This data element is required. Please enter the required data. |
| IVT-Y0807 | Y | Screen Error | Coke burn-off factor from engineering calculations. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be between 4 and 13 , kg coke per barrel of feed). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y0809 | Y | Screen Error | Carbon content of coke based on measurement or engineering estimate. This data element is required. Please enter the required data. |
| IVT-Y0810 | Y | Screen Error | Carbon content of coke based on measurement or engineering estimate. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be between 0.85 and 1 , kg C per kg coke). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y0812 | Y | Data Quality | You have selected default emission factor as the carbon content of coke emission factor basis. The value entered for your carbon content of coke methane emission factor does not equal the expected default factor of 0.94 kg C per kg coke. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. |
| IVT-Y0900-1 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from this unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Y0900-2 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from this unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Y0902 | Y | Screen Error | Enter Own result for Annual CH4 emissions from fluid catalytic cracking unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y0902-1 | Y | Screen Error | Enter Own result for Annual CH4 emissions from coke calcining unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y0903-1 | Y | Screen Error | Value of unit-specific CH4 emission factor. This data element is required. Please enter the required data. |
| IVT-Y0903-2 | Y | Screen Error | Value of unit-specific CH4 emission factor. This data element is required. Please enter the required data. |
| IVT-Y0904-1 | Y | Screen Error | Annual activity data (e.g., input or product rate). This data element is required. Please enter the required data. |
| IVT-Y0904-2 | Y | Screen Error | Annual activity data (e.g., input or product rate). This data element is required. Please enter the required data. |
| IVT-Y0905-1 | Y | Screen Error | Value of unit-specific CH4 emission factor. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, {1}). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y0905-2 | Y | Screen Error | Value of unit-specific CH4 emission factor. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, {1}). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y0906-1 | Y | Screen Error | Annual activity data (e.g., input or product rate). The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, {1}). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y0906-2 | Y | Screen Error | Annual activity data (e.g., input or product rate). The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, {1}). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y0908-1 | Y | Screen Error | Unit of measure for the annual activity data (ensure units are consistent with the emission factor). This data element is required. Please enter the required data. |
| IVT-Y0908-2 | Y | Screen Error | Unit of measure for the annual activity data (ensure units are consistent with the emission factor). This data element is required. Please enter the required data. |
| IVT-Y0909-1 | Y | Data Quality | Annual activity data (e.g., input or product rate). When employing a unit-specific emission factor based on a source test for the unit to estimate both CH4 and N2O emissions, the annual activity data value used in both IVT calculations must be the same, but you have entered two different values. You must correct the current value before continuing. |
| IVT-Y0909-2 | Y | Data Quality | Annual activity data (e.g., input or product rate). When employing a unit-specific emission factor based on a source test for the unit to estimate both CH4 and N2O emissions, the annual activity data value used in both IVT calculations must be the same, but you have entered two different values. You must correct the current value before continuing. |
| IVT-Y1000-1 | Y | Data Completeness | You have not yet added any equation inputs data for the annual nitrous oxide emissions from this unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Y1000-2 | Y | Data Completeness | You have not yet added any equation inputs data for the annual nitrous oxide emissions from this unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Y1002 | Y | Screen Error | Enter Own result for Annual N2O emissions from fluid catalytic cracking unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y1002-1 | Y | Screen Error | Enter Own result for Annual N2O emissions from coke calcining unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y1003-1 | Y | Screen Error | Value of unit-specific N2O emission factor. This data element is required. Please enter the required data. |
| IVT-Y1003-2 | Y | Screen Error | Value of unit-specific N2O emission factor. This data element is required. Please enter the required data. |
| IVT-Y1004-1 | Y | Screen Error | Annual activity data (e.g., input or product rate). This data element is required. Please enter the required data. |
| IVT-Y1004-2 | Y | Screen Error | Annual activity data (e.g., input or product rate). This data element is required. Please enter the required data. |
| IVT-Y1005-1 | Y | Screen Error | Value of unit-specific N2O emission factor. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, {1}). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y1005-2 | Y | Screen Error | Value of unit-specific N2O emission factor. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, {1}). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y1006-1 | Y | Screen Error | Annual activity data (e.g., input or product rate). The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, {1}). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y1006-2 | Y | Screen Error | Annual activity data (e.g., input or product rate). The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, {1}). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y1008-1 | Y | Screen Error | Unit of measure for the annual activity data (ensure units are consistent with the emission factor). This data element is required. Please enter the required data. |
| IVT-Y1008-2 | Y | Screen Error | Unit of measure for the annual activity data (ensure units are consistent with the emission factor). This data element is required. Please enter the required data. |
| IVT-Y1009-1 | Y | Data Quality | Annual activity data (e.g., input or product rate). When employing a unit-specific emission factor based on a source test for the unit to estimate both CH4 and N2O emissions, the annual activity data value used in both IVT calculations must be the same, but you have entered two different values. You must correct the current value before continuing. |
| IVT-Y1009-2 | Y | Data Quality | Annual activity data (e.g., input or product rate). When employing a unit-specific emission factor based on a source test for the unit to estimate both CH4 and N2O emissions, the annual activity data value used in both IVT calculations must be the same, but you have entered two different values. You must correct the current value before continuing. |
| IVT-Y1100 | Y | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from this catalytic reforming unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Y11001 | Y | Screen Error | Coke burn-off quantity per regeneration cycle or measurement period(s) [{1}] from engineering estimates. This data element is required. Please enter the required data. |
| IVT-Y11002 | Y | Screen Error | Coke burn-off quantity per regeneration cycle or measurement period(s) [{1}] from engineering estimates. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y11004 | Y | Screen Error | Carbon content of coke based on measurement or engineering estimate per regeneration cycle or measurement period(s) [{1}]. This data element is required. Please enter the required data. |
| IVT-Y11005 | Y | Screen Error | Carbon content of coke based on measurement or engineering estimate per regeneration cycle or measurement period(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y1109 | Y | Screen Error | Enter Own result for Annual CO2 emissions from this catalytic reforming unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y12F00 | Y | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from this sour gas facility. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. |
| IVT-Y12F02 | Y | Screen Error | Enter own result for Annual CO2 emissions from this sour gas sent off-site. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y12F03 | Y | Screen Error | Molar volume conversion factor. This data element is required. Please enter the required data. |
| IVT-Y12F04 | Y | Screen Error | Mole fraction of carbon in the sour gas fed to the sulfur recovery plant. This data element is required. Please enter the required data. |
| IVT-Y12F05 | Y | Screen Error | Mole fraction of carbon in the sour gas fed to the sulfur recovery plant. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be between 0 and 1 , kg-mole C/kg-mole gas). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y12F06 | Y | Screen Error | Mole fraction of carbon in the sour gas fed to the sulfur recovery plant. The value you have provided is more than the largest value EPA expects to be reported for this data element (values expected to be between 0 and 1 , kg-mole C/kg-mole gas). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y12F07 | Y | Data Quality | The value entered for "Mole fraction of carbon in the sour gas fed to the sulfur recovery plant" does not equal the expected default factor 0.2 kg-mole C/kg-mole gas. Please double check this value and enter the default value, or use the pick list to indicate the method used to measure the annual average mole fraction of carbon in the sour gas that you have provided. |
| IVT-Y12F08 | Y | Screen Error | Volumetric flow rate of sour gas (including sour water stripper gas) fed to the sulfur recovery plant. This data element is required. Please enter the required data. |
| IVT-Y12F09 | Y | Screen Error | Volumetric flow rate of sour gas (including sour water stripper gas) fed to the sulfur recovery plant. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be between 0 and 20,000,000,000 , scf/year). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y12U00 | Y | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from this sulfur recovery plant. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Y12U02 | Y | Screen Error | Enter own result for Annual CO2 emissions from this sulfur recovery plant. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y12U03 | Y | Screen Error | Molar volume conversion factor. This data element is required. Please enter the required data. |
| IVT-Y12U04 | Y | Screen Error | Mole fraction of carbon in the sour gas fed to the sulfur recovery plant. This data element is required. Please enter the required data. |
| IVT-Y12U05 | Y | Screen Error | Mole fraction of carbon in the sour gas fed to the sulfur recovery plant. The value you have provided is more than the largest value EPA expects to be reported for this data element (values expected to be between 0 and 1 , kg-mole C/kg-mole gas). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y12U06 | Y | Data Quality | You have not made a selection for the "If measured, method used to measure the annual average mole fraction of carbon in the sour gas" pick list, indicating that you have used the default value. The value entered for "Mole fraction of carbon in the sour gas fed to the sulfur recovery plant" does not equal the expected default value of 0.20 kg-mole C/kg-mole gas. Please double check the mole fraction value and enter the default value, or use the pick list to indicate the method used to measure the annual average mole fraction of carbon in the sour gas that you have provided. |
| IVT-Y12U07 | Y | Screen Error | Volumetric flow rate of sour gas (including sour water stripper gas) fed to the sulfur recovery plant. This data element is required. Please enter the required data. |
| IVT-Y12U08 | Y | Screen Error | Volumetric flow rate of sour gas (including sour water stripper gas) fed to the sulfur recovery plant. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be between 0 and 20,000,000,000 , scf/year). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y12U10 | Y | Screen Error | Correction Factor: Mole fraction of carbon in the tail gas recycled to the front of the sulfur recovery plant. This data element is required. Please enter the required data. |
| IVT-Y12U11 | Y | Screen Error | Correction Factor: Mole fraction of carbon in the tail gas recycled to the front of the sulfur recovery plant. The value you have provided is more than the largest value EPA expects to be reported for this data element (values expected to be between 0 and 1, kg-mole C/kg-mole gas). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y12U12 | Y | Screen Error | Correction Factor: Volumetric flow rate of tail gas recycled to the front of the sulfur recovery plant. This data element is required. Please enter the required data. |
| IVT-Y12U13 | Y | Screen Error | Correction Factor: Volumetric flow rate of tail gas recycled to the front of the sulfur recovery plant. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be greater than or equal to 0, scf/year). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y12U14 | Y | Screen Error | Correction Factor: Mole fraction of carbon in the tail gas recycled to the front of the sulfur recovery plant. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be between 0 and 1, kg-mole C/kg-mole gas). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y12U15 | Y | Screen Error | Mole fraction of carbon in the sour gas fed to the sulfur recovery plant. The value you have provided is less than the smallest value EPA expects to be reported for this data element (values expected to be between 0 and 1 , kg-mole C/kg-mole gas). Please double check this value and the units of measure and revise, if necessary. |
| IVT-Y1301 | Y | Data Completeness | You have not yet added any equation inputs data for the annual carbon dioxide emissions from coke calcining unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Y1302 | Y | Data Quality | Annual carbon content emissions from this coke calcining unit. The calculated value is less than zero. |
| IVT-Y1303 | Y | Screen Error | Annual mass of green coke. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1304 | Y | Screen Error | Annual mass of marketable petroleum coke. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1305 | Y | Screen Error | Annual mass of petroleum coke dust. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1306 | Y | Screen Error | Average mass fraction carbon content of green coke. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1307 | Y | Screen Error | Average mass fraction carbon content of marketable petroleum coke. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1311 | Y | Screen Error | Average mass fraction carbon content of green coke. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y1312 | Y | Screen Error | Average mass fraction carbon content of marketable petroleum coke. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y1314 | Y | Screen Error | Enter Own Result for Annual CO2 emissions from coke calcining unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y15001 | Y | Screen Error | Quantity of asphalt blown. This data element is required. Please enter the required data. |
| IVT-Y15002 | Y | Screen Error | Emission factor for CO2 from uncontrolled asphalt blowing from facility-specific test data. This data element is required. Please enter the required data. |
| IVT-Y15006 | Y | Data Quality | You have selected "Used default emission factor" for basis for the CO2 emission factor. The value entered for emission factor for CO2 from uncontrolled asphalt blowing from facility-specific test data does not equal the expected default factor (1100 metric tons CO2/MMbbl asphalt blown). Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y15008 | Y | Data Completeness | You have not yet added any equation inputs data for the CO2 emissions from asphalt blowing systems. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. |
| IVT-Y15010 | Y | Screen Error | Emission factor for CH4 from uncontrolled asphalt blowing from facility-specific test data. This data element is required. Please enter the required data. |
| IVT-Y15012 | Y | Data Quality | You have selected "Used default emission factor" for basis for the CH4 emission factor. The value entered for emission factor for CH4 from uncontrolled asphalt blowing from facility-specific test data does not equal the expected default factor (580 metric tons CH4/MMbbl asphalt blown). Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y15015 | Y | Data Completeness | You have not yet added any equation inputs data for the CH4 emissions from asphalt blowing systems. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. |
| IVT-Y16A00 | Y | Data Completeness | You have not yet added any equation inputs data for the CO2 emissions from this asphalt blowing unit. Please use the Inputs Verifier Tool to enter inputs for Equation Y-16a and calculate a result for this asphalt blowing unit. |
| IVT-Y16A01 | Y | Screen Error | Quantity of asphalt blown. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y16A02 | Y | Screen Error | Carbon emission factor from asphalt blowing from facility-specific test data. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y16A05 | Y | Data Quality | You have selected the "Used default emission factor" option for the "Basis for the carbon emission factor" value. However, the value entered for "Carbon emission factor from asphalt blowing from facility-specific test data" does not equal the expected default factor (2,750 metric tons C/MMbbl asphalt blown). Please double check this entry and enter the default value, or change the selection from the previous screen to accurately reflect the basis of the emission factor. |
| IVT-Y16A07 | Y | Screen Error | Enter Own result for Annual CO2 emissions from controlled asphalt blowing. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y16B00 | Y | Data Completeness | You have not yet added any equation inputs data for the CO2 emissions from this asphalt blowing unit. Please use the Inputs Verifier Tool to enter inputs for Equation Y-16b and calculate a result for this asphalt blowing unit. |
| IVT-Y16B01 | Y | Screen Error | Quantity of asphalt blown. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y16B02 | Y | Screen Error | Quantity of asphalt blown. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y16B04 | Y | Screen Error | Emission factor for CO2 from uncontrolled asphalt blowing from facility-specific test data. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y16B05 | Y | Screen Error | Emission factor for CO2 from uncontrolled asphalt blowing from facility-specific test data. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y16B07 | Y | Data Quality | You have selected the "Used default emission factor" option for the "Basis for the CO2 emission factor" value. However, the value entered for "Emission factor for CO2 from uncontrolled asphalt blowing from facility-specific test data" does not equal the expected default factor (1,100 metric tons CO2/MMbbl asphalt blown). Please double check this entry and enter the default value, or change the selection from the previous screen to accurately reflect the basis of the emission factor. |
| IVT-Y16B08 | Y | Screen Error | Carbon emission factor from asphalt blowing from facility-specific test data. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y16B09 | Y | Screen Error | Carbon emission factor from asphalt blowing from facility-specific test data. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y16B11 | Y | Data Quality | You have selected the "Used default emission factor" option for the "Basis for the carbon emission factor" value. However, the value entered for "Carbon emission factor from asphalt blowing from facility-specific test data" does not equal the expected default factor (2,750 metric tons C/MMbbl asphalt blown). Please double check this entry and enter the default value, or change the selection from the previous screen to accurately reflect the basis of the emission factor. |
| IVT-Y16B13 | Y | Screen Error | Enter Own result for Annual CO2 emissions from this asphalt blowing unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y16B16 | Y | Data Quality | Annual CO2 emissions from this asphalt blowing unit. The calculated value is less than zero. |
| IVT-Y17000 | Y | Data Completeness | You have not yet added any equation inputs data for the CH4 emissions from this asphalt blowing unit. Please use the Inputs Verifier Tool to enter inputs for Equation Y-17 and calculate a result for this asphalt blowing unit. |
| IVT-Y17001 | Y | Screen Error | Emission factor for CH4 from uncontrolled asphalt blowing from facility-specific test data. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y17002 | Y | Screen Error | Emission factor for CH4 from uncontrolled asphalt blowing from facility-specific test data. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y17004 | Y | Data Quality | You have selected the "Used default emission factor" option for the "Basis for the CH4 emission factor" value. However, the value entered for "Emission factor for CH4 from uncontrolled asphalt blowing from facility-specific test data" does not equal the expected default factor (580 metric tons CH4/MMbbl asphalt blown). Please double check this entry and enter the default value, or change the selection from the previous screen to accurately reflect the basis of the emission factor. |
| IVT-Y17008 | Y | Screen Error | Enter Own result for Annual CH4 emissions from this asphalt blowing unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y1701 | Y | Screen Error | Emission factor for CH4 from uncontrolled asphalt blowing from facility-specific test data. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y17010 | Y | Screen Error | Enter Own result for Annual CH4 emissions from this asphalt blowing unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y17013 | Y | Data Completeness | You have not yet added any equation inputs data for the CH4 emissions from this asphalt blowing unit. Please use the Inputs Verifier Tool to enter inputs for Equation Y-17 and calculate a result for this asphalt blowing unit. |
| IVT-Y1702 | Y | Screen Error | Emission factor for CH4 from uncontrolled asphalt blowing from facility-specific test data. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y1706 | Y | Screen Error | Enter Own result for Annual CH4 emissions from this asphalt blowing unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y1800 | Y | Screen Error | Height if coking unit vessel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1803 | Y | Screen Error | Height if coking unit vessel. This data element is required. Please enter the required data or click CANCEL |
| IVT-Y1804 | Y | Screen Error | Gauge pressure of the coking vessel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1805 | Y | Screen Error | Volumetric void fraction of coking vessel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1806 | Y | Screen Error | Diameter of coking unit vessel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1807 | Y | Screen Error | Molar volume conversion factor. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1808 | Y | Screen Error | Molar fraction of methane in coking vessel gas. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1817 | Y | Screen Error | Volumetric void fraction of coking vessel. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y1818 | Y | Screen Error | Molar fraction of methane in coking vessel gas. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y1820 | Y | Data Quality | You have selected "Default Value" for Basis for the volumetric void fraction of the coke vessel prior to steaming for drumset {1}. The value entered for Volumetric void fraction of coking vessel prior to steaming does not equal the expected default factor (0.6 decimal fraction). Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y1821 | Y | Data Quality | You have selected "Default Value" for Basis for the mole fraction of methane in the coking vessel gas for drumset {1}. The value entered for Mole fraction of methane in coking vessel gas does not equal the expected default factor (0.01 decimal fraction). Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y1903 | Y | Screen Error | Average volumetric flow rate of process gas event number {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1904 | Y | Screen Error | Mole fraction of methane event number {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1905 | Y | Screen Error | Venting time for the event, event number {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1906 | Y | Screen Error | Molar volume conversion factor event number {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y1907 | Y | Screen Error | Mole fraction of methane event number {1}. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y1955 | Y | Screen Error | Venting time for the event, event number {1}. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. |
| IVT-Y1956 | Y | Screen Error | Venting time for the event, event number {1}. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. |
| IVT-Y1B000 | Y | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation Y-1b and calculate a result for this flare. |
| IVT-Y1B001 | Y | Screen Error | Molar Volume Conversion Factor. This data element is required. Please select either of the two values provided below. |
| IVT-Y1B002 | Y | Screen Error | Volume of flare gas combusted during {1}. This data element is required. Please enter the required value. |
| IVT-Y1B003 | Y | Screen Error | Volume of flare gas combusted during {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y1B005 | Y | Screen Error | Mole percent CO2 concentration in the flare gas stream during {1}. This data element is required. Please enter the required value. |
| IVT-Y1B006 | Y | Screen Error | Mole percent CO2 concentration in the flare gas stream during {1}. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-Y1B008 | Y | Screen Error | Mole percent concentration of compound {1} in the flare gas stream during the measurement period. This data element is required. Please enter the required value. |
| IVT-Y1B009 | Y | Screen Error | Mole percent concentration of compound {1} in the flare gas stream during the measurement period. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-Y1B010 | Y | Screen Error | Carbon mole number of compound {1} in the flare gas stream. This data element is required. Please enter the required value. |
| IVT-Y1B013 | Y | Data Completeness | You have not yet added any equation inputs data for compound number {1}. Please use the Inputs Verifier Tool to enter compound inputs for Equation Y-1B and calculate a result for this flare. |
| IVT-Y20000 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from uncontrolled blowdown systems. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. |
| IVT-Y20001 | Y | Screen Error | Quantity of crude oil plus the quantity of intermediate products received from off site that are processed at the facility. This data element is required. Please enter the required data. |
| IVT-Y20002 | Y | Screen Error | Quantity of crude oil plus the quantity of intermediate products received from off site that are processed at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y20003 | Y | Screen Error | Molar volume conversion factor. This data element is required. Please enter the required data. |
| IVT-Y20004 | Y | Screen Error | Methane emission factor for uncontrolled blowdown systems. This data element is required. Please select either of the two values provided below. |
| IVT-Y20005 | Y | Screen Error | Methane emission factor for uncontrolled blowdown systems. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y2008 | Y | Data Quality | You have selected default emission factor as the methane emission factor basis. The value entered for your methane emission factor does not equal the expected default factor of 137,000 scf CH4/MMbbl. Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y2010 | Y | Screen Error | Enter Own result for Annual CH4 emissions from uncontrolled blowdown systems. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y22000 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from storage of liquids other than unstabilized crude oil. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. |
| IVT-Y22001 | Y | Screen Error | Quantity of crude oil plus the quantity of intermediate products received from off site that are processed at the facility. This data element is required. Please enter the required data. |
| IVT-Y22002 | Y | Screen Error | Quantity of crude oil plus the quantity of intermediate products received from off site that are processed at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y2210 | Y | Screen Error | Enter Own result for Annual CH4 emission from stabilized crude oil storage. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y23000 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from storage of unstabilized crude oil. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. |
| IVT-Y23001 | Y | Screen Error | Quantity of unstabilized crude oil received at the facility. This data element is required. Please enter the required data. |
| IVT-Y23002 | Y | Screen Error | Quantity of unstabilized crude oil received at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y23003 | Y | Screen Error | Pressure differential from the previous storage pressure to atmospheric pressure. This data element is required. Please enter the required data. |
| IVT-Y23004 | Y | Screen Error | Pressure differential from the previous storage pressure to atmospheric pressure. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y23005 | Y | Screen Error | Average mole fraction of CH4 in vent gas from the unstabilized crude oil storage tanks from facility measurements. This data element is required. Please enter the required data. |
| IVT-Y23006 | Y | Screen Error | Average mole fraction of CH4 in vent gas from the unstabilized crude oil storage tanks from facility measurements. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y23007 | Y | Screen Error | Average mole fraction of CH4 in vent gas from the unstabilized crude oil storage tanks from facility measurements. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y23008 | Y | Screen Error | Molar volume conversion factor. This data element is required. Please enter the required data. |
| IVT-Y23011 | Y | Data Quality | You have selected Equation Y-23 default factor as the average mole fraction of CH4 in vent gas from the unstabilized crude oil storage tanks basis. The value entered for your average mole fraction of CH4 in vent gas from the unstabilized crude oil storage tanks from facility measurements does not equal the expected default factor of 0.27 kg-mole CH4/kg-mole gas. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. |
| IVT-Y2310 | Y | Screen Error | Enter Own result for Annual CH4 emission from unstabilized crude oil storage. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y3000 | Y | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation Y-3 and calculate a result for this flare. |
| IVT-Y3001 | Y | Screen Error | Annual volume of flare gas combusted during normal operations from company records. This data element is required. Please enter the required data. |
| IVT-Y3002 | Y | Screen Error | Annual volume of flare gas combusted during normal operations from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y3004 | Y | Screen Error | Higher Heating Value for fuel gas or flare gas from company records. This data element is required. Please enter the required data. |
| IVT-Y3005 | Y | Screen Error | Higher Heating Value for fuel gas or flare gas from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y3008 | Y | Screen Error | Molar volume Conversion Factor. This data element is required. Please select either of the two values provided below. |
| IVT-Y3009 | Y | Screen Error | Volume of flare gas combusted during indexed start-up, shutdown, or malfunction event number(s) [{1}] from engineering calculations. You must enter a value that is greater than or equal to zero. |
| IVT-Y3012 | Y | Screen Error | Average molecular weight of the flare gas, from the analysis results or engineering calculations for event number(s) [{1}]. This data element is required. Please enter the required value. |
| IVT-Y3013 | Y | Screen Error | Average molecular weight of the flare gas, from the analysis results or engineering calculations for event number(s) [{1}]. You must enter a value that is greater than or equal to zero. |
| IVT-Y3016 | Y | Screen Error | Average carbon content of the flare gas, from analysis results or engineering calculations for event number(s) [{1}]. This data element is required. Please enter the required value. |
| IVT-Y3017 | Y | Screen Error | Average carbon content of the flare gas, from analysis results or engineering calculations for event number(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y3020 | Y | Screen Error | Volume of flare gas combusted during indexed start-up, shutdown, or malfunction event number(s) [{1}] from engineering calculations. This data element is required. Please enter the required value. |
| IVT-Y3021 | Y | Screen Error | Volume of flare gas combusted during indexed start-up, shutdown, or malfunction event number(s) [{1}] from engineering calculations. You must enter a value that is greater than or equal to zero. |
| IVT-Y3022 | Y | Screen Error | Average molecular weight of the flare gas, from the analysis results or engineering calculations for event number(s) [{1}]. You must enter a value that is greater than or equal to zero. |
| IVT-Y3023 | Y | Screen Error | Average carbon content of the flare gas, from analysis results or engineering calculations for event number(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y3024 | Y | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y3026 | Y | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y3028 | Y | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y3031 | Y | Screen Error | Fuel Type. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y3032 | Y | Screen Error | CO2 emission factor. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y3033 | Y | Screen Error | CO2 emission factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y4000 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation Y-4 and calculate a result for this flare. |
| IVT-Y4001 | Y | Screen Error | Weight fraction of carbon in the flare gas prior to combustion that is contributed by methane from measurement values or engineering calculations. This data element is required. Please enter the required data. |
| IVT-Y4002 | Y | Screen Error | Weight fraction of carbon in the flare gas prior to combustion that is contributed by methane from measurement values or engineering calculations. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y4003 | Y | Data Quality | You have selected the "Default Value" option for the "Basis for the fraction of carbon in the flare gas contributed by methane" option. However, the value entered for "Weight fraction of carbon in the flare gas prior to combustion that is contributed by methane from measurement values or engineering calculations" does not equal the expected default factor (0.4 kg C in methane in flare gas/ kg C in flare gas). Please double check this entry and enter the default value, or change the selection from the previous screen to accurately reflect the basis of the emission factor. |
| IVT-Y4004 | Y | Data Quality | You have selected "Default Value" for Basis for the fraction of carbon in the flare gas contributed by methane. The value entered for weight fraction of carbon in the flare gas prior to combustion that is contributed by methane from measurement values or engineering calculations name of corresponding input field label does not equal the expected default factor ((0.4 kg C in methane in flare gas/ kg C in flare gas)). Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y4005 | Y | Screen Error | Enter Own result for Annual CH4 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y4006 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation Y-4 and calculate a result for this flare. |
| IVT-Y4007 | Y | Data Quality | You have selected "Default Value" for Basis for the fraction of carbon in the flare gas contributed by methane. The value entered for weight fraction of carbon in the flare gas prior to combustion that is contributed by methane from measurement values or engineering calculations name of corresponding input field label does not equal the expected default factor ((0.4 kg C in methane in flare gas/ kg C in flare gas)). Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y4009 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation Y-4 and calculate a result for this flare. |
| IVT-Y4010 | Y | Data Quality | You have selected "Default Value" for Basis for the fraction of carbon in the flare gas contributed by methane. The value entered for weight fraction of carbon in the flare gas prior to combustion that is contributed by methane from measurement values or engineering calculations name of corresponding input field label does not equal the expected default factor ((0.4 kg C in methane in flare gas/ kg C in flare gas)). Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y4011 | Y | Screen Error | Enter Own result for Annual CH4 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y4012 | Y | Data Completeness | You have not yet added any equation inputs data for the annual methane emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation Y-4 and calculate a result for this flare. |
| IVT-Y4013 | Y | Data Quality | You have selected "Default Value" for Basis for the fraction of carbon in the flare gas contributed by methane. The value entered for weight fraction of carbon in the flare gas prior to combustion that is contributed by methane from measurement values or engineering calculations name of corresponding input field label does not equal the expected default factor ((0.4 kg C in methane in flare gas/ kg C in flare gas)). Please double check this value and enter the default value, or change the selection to accurately reflect the basis of the emission factor. |
| IVT-Y4016 | Y | Screen Error | Enter Own result for Annual CH4 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y4030 | Y | Screen Error | Enter Own result for Annual CH4 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y420 | Y | Data Completeness | You have not yet added any equation inputs data for the CH4 emissions. Please use the Inputs Verifier Tool to enter equation inputs for each delayed coking drum set at the facility. |
| IVT-Y5001 | Y | Screen Error | Enter Own result for Annual N2O emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y5003 | Y | Screen Error | Enter Own result for Annual N2O emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y5005 | Y | Screen Error | Enter Own result for Annual N2O emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y5010 | Y | Screen Error | Emission factor for CH4 from uncontrolled asphalt blowing from facility-specific test data. This data element is required. Please enter the required data. |
| IVT-Y5018 | Y | Screen Error | Enter Own result for Annual CO2 emissions. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y5019 | Y | Screen Error | Enter Own result for Annual CH4 emissions. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y5030 | Y | Screen Error | Enter Own result for Annual N2O emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y5032 | Y | Screen Error | Internal height of delayed coking unit vessel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5035 | Y | Screen Error | Typical distance from the top of the delayed coking unit vessel to the top of the coke bed (i.e., coke drum outage) at the end of the coking cycle from company records or engineering estimates. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5038 | Y | Screen Error | Diameter of delayed coking unit vessel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5041 | Y | Screen Error | Typical distance from the bottom of the coking unit vessel to the top of the water level at the end of the cooling cycle just prior to atmospheric venting from company records or engineering estimates. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5042 | Y | Screen Error | Typical distance from the bottom of the coking unit vessel to the top of the water level at the end of the cooling cycle just prior to atmospheric venting from company records or engineering estimates. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5044 | Y | Screen Error | Diameter of delayed coking unit vessel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5047 | Y | Screen Error | Typical dry mass of coke in the delayed coking unit vessel at the end of the coking cycle as determined in paragraph (i)(1) of this section. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5048 | Y | Screen Error | Temperature of the delayed coking unit vessel overhead line measured as near the coking unit vessel as practical just prior to venting to the atmosphere. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5051 | Y | Screen Error | Temperature of the delayed coking unit vessel near the bottom of the coke bed. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5054 | Y | Screen Error | Pressure of the delayed coking unit vessel just prior to opening the atmospheric vent. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5055 | Y | Screen Error | Pressure of the delayed coking unit vessel just prior to opening the atmospheric vent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5057 | Y | Screen Error | Cumulative number of decoking cycles (or coke-cutting cycles) for all delayed coking unit vessels associated with the delayed coking unit during the year. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5058 | Y | Screen Error | Cumulative number of decoking cycles (or coke-cutting cycles) for all delayed coking unit vessels associated with the delayed coking unit during the year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5060 | Y | Screen Error | Methane emission factor for delayed coking unit from unit-specific measurement data. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y5063 | Y | Screen Error | Mass of water in the delayed coking unit vessel at the end of the cooling cycle just prior to atmospheric venting. This data element is required. |
| IVT-Y5064 | Y | Screen Error | Typical dry mass of coke in the delayed coking unit vessel at the end of the coking cycle as determined in paragraph (i)(1) of this section. This data element is required. |
| IVT-Y5065 | Y | Screen Error | Average temperature of the delayed coking unit vessel when the drum is first vented to the atmosphere as determined in paragraph (i)(3) of this section. This data element is required. |
| IVT-Y5067 | Y | Screen Error | Enter Own result for Annual CH4 emissions from delayed coking unit. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y5068 | Y | Data Quality | Annual CH4 emissions from this delayed coking unit. The calculated value is less than zero. |
| IVT-Y5069 | Y | Screen Error | Internal height of delayed coking unit vessel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5070 | Y | Screen Error | Typical distance from the top of the delayed coking unit vessel to the top of the coke bed (i.e., coke drum outage) at the end of the coking cycle from company records or engineering estimates. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5071 | Y | Screen Error | Diameter of delayed coking unit vessel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5072 | Y | Screen Error | Diameter of delayed coking unit vessel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5073 | Y | Screen Error | Typical dry mass of coke in the delayed coking unit vessel at the end of the coking cycle as determined in paragraph (i)(1) of this section. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5074 | Y | Screen Error | Temperature of the delayed coking unit vessel near the bottom of the coke bed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5075 | Y | Screen Error | Methane emission factor for delayed coking unit from unit-specific measurement data. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5076 | Y | Screen Error | Temperature of the delayed coking unit vessel overhead line measured as near the coking unit vessel as practical just prior to venting to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y5077 | Y | Data Completeness | You have not yet added any equation inputs data for the CH4 emissions from this delayed coking unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. |
| IVT-YLD000 | Y | Data Completeness | You have not yet added any equation inputs data for the material "{1}" in vessel "{2}" for loading operations. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. |
| IVT-YLD001 | Y | Screen Error | Is loading factor L calculated from AP-42 Section 5.2 Equation 1, or is a default value entered using Tables 5.2-2, 5.2-5, or 5.2-6 of AP-42? This data element is required. Please select either of the two values provided below. |
| IVT-YLD002 | Y | Screen Error | Saturation factor from Table 5.2-1. This data element is required. Please enter the required data. |
| IVT-YLD003 | Y | Screen Error | Saturation factor from Table 5.2-1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-YLD006 | Y | Screen Error | True vapor pressure of liquid loaded. This data element is required. Please enter the required data. |
| IVT-YLD007 | Y | Screen Error | True vapor pressure of liquid loaded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-YLD008 | Y | Screen Error | Molecular weight of vapors. This data element is required. Please enter the required data. |
| IVT-YLD009 | Y | Screen Error | Molecular weight of vapors. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-YLD010 | Y | Screen Error | Temperature of bulk liquid loaded. This data element is required. Please enter the required data. |
| IVT-YLD011 | Y | Screen Error | Temperature of bulk liquid loaded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-YLD012 | Y | Screen Error | Total loading loss (without efficiency correction). This data element is required. Please enter the required data. |
| IVT-YLD013 | Y | Screen Error | Total loading loss (without efficiency correction). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-YLD015 | Y | Screen Error | Overall emission control system reduction efficiency, including the vapor collection system efficiency and the vapor recovery or destruction efficiency (enter zero if no emission controls). This data element is required. Please enter the required data. |
| IVT-YLD016 | Y | Screen Error | Overall emission control system reduction efficiency, including the vapor collection system efficiency and the vapor recovery or destruction efficiency (enter zero if no emission controls). You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-YLD017 | Y | Screen Error | Vapor phase concentration of methane in liquid loaded. Please enter the required data. |
| IVT-YLD018 | Y | Screen Error | Vapor phase concentration of methane in liquid loaded. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-YLD019 | Y | Screen Error | Quantity of material loaded. This data element is required. Please enter the required data. |
| IVT-YLD020 | Y | Screen Error | Quantity of material loaded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y000 | Y | Data Completeness | You have selected Subpart Y for reporting, but you have not yet indicated if the facility sends a sour gas stream off-site for sulfur recovery. This data element is required. Please make a selection. |
| Y002 | Y | Screen Error | Control device used to reduce methane (and other organic) emissions from the unit. This data element is required. |
| Y003 | Y | Screen Error | Control device used to reduce methane (and other organic) emissions from the unit. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y005 | Y | Screen Error | Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y006 | Y | Data Completeness | Annual CO2 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. |
| Y007 | Y | Screen Error | Annual CO2 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y009 | Y | Data Completeness | Basis for the CO2 emissions factor. This data element is required. |
| Y010 | Y | Data Completeness | Basis for the CO2 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y011 | Y | Data Completeness | Annual CH4 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. |
| Y012 | Y | Screen Error | Annual CH4 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y014 | Y | Data Completeness | Basis for the CH4 emission factor. This data element is required. |
| Y015 | Y | Data Completeness | Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y016 | Y | Data Completeness | Annual CO2 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. |
| Y017 | Y | Screen Error | Annual CO2 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y019 | Y | Data Completeness | Basis for the carbon emission factor. This data element is required. |
| Y020 | Y | Data Completeness | Basis for the carbon emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y021 | Y | Data Completeness | Annual CH4 emissions rate from this asphalt blowing unit. This data element is required. Please enter the required data. |
| Y022 | Y | Screen Error | Annual CH4 emissions rate from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y024 | Y | Data Completeness | Basis for the CH4 emission factor. This data element is required. |
| Y025 | Y | Data Completeness | Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y026 | Y | Data Completeness | Annual CO2 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. |
| Y027 | Y | Screen Error | Annual CO2 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y029 | Y | Data Completeness | Basis for the CO2 emission factor. This data element is required. |
| Y030 | Y | Data Completeness | Basis for the CO2 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y031 | Y | Data Completeness | Basis for the carbon emission factor. This data element is required. |
| Y032 | Y | Data Completeness | Basis for the carbon emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y033 | Y | Data Completeness | Annual CH4 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. |
| Y034 | Y | Screen Error | Annual CH4 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y036 | Y | Data Completeness | Basis for the CH4 emission factor. This data element is required. |
| Y037 | Y | Data Completeness | Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y038 | Y | Data Completeness | You have selected Subpart Y for reporting, but you have not yet selected an Uncontrolled Blowdown Systems calculation method. This data element is required. Please make a selection. |
| Y039 | Y | Data Completeness | Annual CH4 emissions from uncontrolled blowdown systems. This data element is required. Please enter the required data. |
| Y040 | Y | Screen Error | Annual CH4 emissions from blowdown systems. The value you have provided is more than the largest value EPA expects to be reported for this data element (values expected to be between 0 and 1000, metric tons). Please double check this value and the units of measure and revise, if necessary. |
| Y042 | Y | Data Completeness | Basis for the methane emission factor value. This data element is required. |
| Y043 | Y | Data Completeness | Annual volumetric flow discharged to the atmosphere. This data element is required. Please enter the required data. |
| Y044 | Y | Screen Error | Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y046 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. This data element is required. |
| Y047 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y049 | Y | Screen Error | Number of cumulative venting events for all relevant vents, if vents are intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y051 | Y | Data Completeness | Cumulative venting time for all relevant vents. This data element is required. Please enter the required data. |
| Y052 | Y | Screen Error | Cumulative venting time for all relevant vents. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y055 | Y | Screen Error | Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. |
| Y057 | Y | Data Completeness | Maximum rated throughput of the coke calcining unit. This data element is required. Please enter the required data. |
| Y058 | Y | Screen Error | Maximum rated throughput of the coke calcining unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y060 | Y | Screen Error | Method used to calculate the CH4 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y061 | Y | Screen Error | Method used to calculate the N2O emissions. This data element is required. Please make a selection or click CANCEL. |
| Y062 | Y | Screen Error | Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. |
| Y063 | Y | Screen Error | Method used to calculate CH4 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y064 | Y | Screen Error | Method used to calculate N2O emissions. This data element is required. Please make a selection or click CANCEL. |
| Y065 | Y | Data Completeness | Annual CO2 emissions from this coke calcining unit. This data element is required. Please enter the required data. |
| Y066 | Y | Screen Error | Annual CO2 emissions from this coke calcining unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y068 | Y | Data Completeness | Method used to measure the annual carbon content of green coke fed to the unit. This data element is required. |
| Y069 | Y | Data Completeness | Method used to measure the annual carbon content of marketable coke produced. This data element is required. |
| Y070 | Y | Data Completeness | Description of coke dust recycling for the unit. This data element is required. |
| Y071 | Y | Data Completeness | Annual CH4 emissions from this coke calcining unit. This data element is required. Please enter the required data. |
| Y072 | Y | Screen Error | Annual CH4 emissions from this coke calcining unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y075 | Y | Data Completeness | Basis for the CH4 emission factor. This data element is required. |
| Y076 | Y | Data Completeness | Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y077 | Y | Data Completeness | Annual N2O emissions from this coke calcining unit. This data element is required. Please enter the required data. |
| Y078 | Y | Screen Error | Annual N2O emissions from this coke calcining unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y080 | Y | Data Completeness | Basis for the N2O emission factor. This data element is required. |
| Y081 | Y | Data Completeness | Basis for the N2O emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y084 | Y | Screen Error | Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. |
| Y086 | Y | Data Completeness | Maximum rated throughput of the unit. This data element is required. Please enter the required data. |
| Y087 | Y | Screen Error | Maximum rated throughput of the unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y089 | Y | Screen Error | Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y090 | Y | Screen Error | Method used to calculate the CH4 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y091 | Y | Screen Error | Method used to calculate the N2O emissions. This data element is required. Please make a selection or click CANCEL. |
| Y092 | Y | Screen Error | Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. |
| Y093 | Y | Screen Error | Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y094 | Y | Screen Error | Method used to calculate the CH4 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y095 | Y | Screen Error | Method used to calculate the N2O emissions. This data element is required. Please make a selection or click CANCEL. |
| Y096 | Y | Data Completeness | Annual CO2 emissions from this fluid catalytic cracking unit. This data element is required. Please enter the required data. |
| Y097 | Y | Screen Error | Annual CO2 emissions from this fluid catalytic cracking unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y099 | Y | Data Completeness | Total number of regeneration cycles or measurement periods. This data element is required. Please enter the required data. |
| Y100 | Y | Screen Error | Total number of regeneration cycles or measurement periods. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y102 | Y | Screen Error | Are the GHG emissions from the low heat value gas accounted for in Subpart C? This data element is required. Please make a selection or click CANCEL. |
| Y103 | Y | Data Completeness | Basis for the carbon content value. This data element is required. |
| Y104 | Y | Data Completeness | Basis for the carbon content value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y105 | Y | Data Completeness | Annual average volumetric flow rate of exhaust gas from this fluid catalytic cracking unit prior to the combustion of other fossil fuels. This data element is required. Please enter the required data. |
| Y106 | Y | Screen Error | Annual average volumetric flow rate of exhaust gas from this fluid catalytic cracking unit prior to the combustion of other fossil fuels. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y108 | Y | Data Completeness | Number of hours missing data procedures were used for annual average volumetric flow rate of exhaust gas. This data element is required. Please enter the required data. |
| Y109 | Y | Screen Error | Number of hours missing data procedures were used for annual average volumetric flow rate of exhaust gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y111 | Y | Data Completeness | Annual average percent CO2 in exhaust gas stream. This data element is required. Please enter the required data. |
| Y112 | Y | Screen Error | Annual average percent CO2 in exhaust gas stream. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. |
| Y114 | Y | Data Completeness | Number of hours missing data procedures were used for annual average percent CO2 in exhaust gas stream. This data element is required. Please enter the required data. |
| Y115 | Y | Screen Error | Number of hours missing data procedures were used for annual average percent CO2 in exhaust gas stream. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y117 | Y | Data Completeness | Annual average flow rate of inlet air. This data element is required. Please enter the required data. |
| Y118 | Y | Screen Error | Annual average flow rate of inlet air. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y120 | Y | Data Completeness | Annual average flow rate of oxygen enriched air. This data element is required. Please enter the required data. |
| Y12001 | Y | Data Quality | Value of Correction. The calculated value is less than zero. |
| Y121 | Y | Screen Error | Annual average flow rate of oxygen enriched air. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y123 | Y | Data Completeness | Annual average percent O2 in exhaust gas stream. This data element is required. Please enter the required data. |
| Y124 | Y | Screen Error | Annual average percent O2 in exhaust gas stream. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. |
| Y126 | Y | Data Completeness | Number of hours missing data procedures were used for annual average percent O2 in exhaust gas stream. This data element is required. Please enter the required data. |
| Y127 | Y | Screen Error | Number of hours missing data procedures were used for annual average percent O2 in exhaust gas stream. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y129 | Y | Data Completeness | Annual average percent N2 in exhaust gas stream. This data element is required. Please enter the required data. |
| Y130 | Y | Screen Error | Annual average percent N2 in exhaust gas stream. This value should be reported as a percentage, and should be within the range of 0 to 100 %. The value you provided is outside that range. You must correct the current value before continuing. |
| Y132 | Y | Data Completeness | Number of hours missing data procedures were used for annual average percent N2 in exhaust gas stream. This data element is required. Please enter the required data. |
| Y133 | Y | Screen Error | Number of hours missing data procedures were used for annual average percent N2 in exhaust gas stream. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y135 | Y | Data Completeness | Describe the method that was used to measure annual average percent N2 in exhaust gas stream. This data element is required. |
| Y136 | Y | Data Completeness | Annual average percent N2 in oxygen-enriched gas stream inlet. This data element is required. Please enter the required data. |
| Y136a | Y | Data Completeness | Annual average percent O2 in oxygen-enriched gas stream inlet. This data element is required. Please enter the required data. |
| Y136b | Y | Screen Error | Annual average percent O2 in oxygen-enriched gas stream inlet. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. |
| Y137 | Y | Screen Error | Annual average percent N2 in oxygen-enriched gas stream inlet. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. |
| Y139 | Y | Data Completeness | Describe the method that was used to measure annual average percent N2 in oxygen-enriched gas stream inlet. This data element is required. |
| Y140 | Y | Data Completeness | Number of hours missing data procedures were used for annual average percent N2 in oxygen-enriched gas stream inlet. This data element is required. Please enter the required data. |
| Y141 | Y | Screen Error | Number of hours missing data procedures were used for annual average percent N2 in oxygen-enriched gas stream inlet. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y143 | Y | Data Completeness | Annual average percent CO in exhaust gas stream. This data element is required. Please enter the required data. |
| Y144 | Y | Screen Error | Annual average percent CO in exhaust gas stream. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. |
| Y146 | Y | Data Completeness | Number of hours missing data procedures were used for annual average percent CO in exhaust gas stream. This data element is required. Please enter the required data. |
| Y147 | Y | Screen Error | Number of hours missing data procedures were used for annual average percent CO in exhaust gas stream. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y149 | Y | Data Completeness | Annual CH4 emissions from the cracking/coking/reforming unit. This data element is required. Please enter the required data. |
| Y150 | Y | Screen Error | Annual CH4 emissions from the cracking/coking/reforming unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y152 | Y | Data Completeness | Basis for the CH4 emission factor. This data element is required. |
| Y153 | Y | Data Completeness | Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y154 | Y | Data Completeness | Annual N2O emissions from the cracking/coking/reforming unit. This data element is required. Please enter the required data. |
| Y155 | Y | Screen Error | Annual N2O emissions from the cracking/coking/reforming unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y157 | Y | Data Completeness | Basis for the N2O emission factor. This data element is required. |
| Y158 | Y | Data Completeness | Basis for the N2O emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y159 | Y | Screen Error | Coking drum name or ID. This data element is required. Please enter the required data or click CANCEL. |
| Y160 | Y | Data Completeness | Typical drum outage for coking drum(s) or ID(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| Y161 | Y | Screen Error | Typical drum outage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y164 | Y | Screen Error | Method used to calculate the CH4 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y165 | Y | Screen Error | Method used for calculation. This data element is required. Please make a selection or click CANCEL. |
| Y166 | Y | Screen Error | Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y169 | Y | Data Completeness | You have selected Subpart Y for reporting, but you have not yet selected a method used to calculate the methane emissions from Equipment Leaks. This data element is required. Please make a selection. |
| Y170 | Y | Data Completeness | Annual CH4 emissions from equipment leaks. This data element is required. Please enter the required data. |
| Y171 | Y | Screen Error | Annual CH4 emissions from equipment leaks. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y171b | Y | Data Quality | You have reported a non-zero value for the annual quantity of CH4 emissions for equipment leaks, but the total number of pieces of equipment of all types is zero. Please enter the number of each equipment type. |
| Y173 | Y | Data Completeness | Cumulative CH4 emissions for all equipment leak sources. This data element is required. Please enter the required data. |
| Y174 | Y | Screen Error | Cumulative CH4 emissions for all equipment leak sources. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y174b | Y | Data Quality | You have reported a non-zero value for the annual quantity of CH4 emissions for equipment leaks, but the total number of pieces of equipment of all types is zero. Please enter the number of each equipment type. |
| Y176 | Y | Data Completeness | Cumulative number of catalytic cracking units, coking units, hydrocracking, and full-range distillation columns at the facility. This data element is required. Please enter the required data. |
| Y177 | Y | Screen Error | Cumulative number of catalytic cracking units, coking units, hydrocracking, and full-range distillation columns at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y179 | Y | Data Completeness | Cumulative number of hydrotreating/hydrorefining units, catalytic reforming units, and visbreaking units at the facility. This data element is required. Please enter the required data. |
| Y180 | Y | Screen Error | Cumulative number of hydrotreating/hydrorefining units, catalytic reforming units, and visbreaking units at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y182 | Y | Data Completeness | Total number of hydrogen plants at the facility. This data element is required. Please enter the required data. |
| Y183 | Y | Screen Error | Total number of hydrogen plants at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y185 | Y | Data Completeness | Total number of fuel gas systems at the facility. This data element is required. Please enter the required data. |
| Y186 | Y | Screen Error | Total number of fuel gas systems at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y188 | Y | Data Completeness | Number of atmospheric crude oil distillation columns at the facility. This data element is required. Please enter the required data. |
| Y189 | Y | Screen Error | Number of atmospheric crude oil distillation columns at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y192 | Y | Data Completeness | Type of flare. This data element is required. Please make a selection. |
| Y193 | Y | Data Completeness | Flare service type. This data element is required. Please make a selection. |
| Y194 | Y | Data Completeness | Flare service type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y195 | Y | Screen Error | Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y196 | Y | Screen Error | Equation Y-1a Inputs Method. This data element is required. Please make a selection or click CANCEL. |
| Y201 | Y | Data Completeness | Annual CO2 emissions from this flare. This data element is required. Please enter the required data. |
| Y202 | Y | Screen Error | Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y204 | Y | Data Completeness | Frequency of measurement data. This data element is required. Please make a selection. |
| Y205 | Y | Data Completeness | Annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y206 | Y | Screen Error | Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y208 | Y | Data Completeness | Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y209 | Y | Screen Error | Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y211 | Y | Data Completeness | Annual average molecular weight. This data element is required. Please enter the required data. |
| Y212 | Y | Screen Error | Annual average molecular weight. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y214 | Y | Data Completeness | Method(s) used to determine the molecular weight of the flare gas. This data element is required. |
| Y215 | Y | Data Completeness | Number of days missing data procedures were used for annual average molecular weight of the flare gas. This data element is required. Please enter the required data. |
| Y216 | Y | Screen Error | Number of days missing data procedures were used for annual average molecular weight of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y218 | Y | Data Completeness | Annual average carbon content of the flare gas. This data element is required. Please enter the required data. |
| Y219 | Y | Screen Error | Annual average carbon content of the flare gas. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y221 | Y | Data Completeness | Method(s) used to determine the carbon content of the flare gas. This data element is required. |
| Y222 | Y | Data Completeness | Number of days missing data procedures were used for average carbon content of the flare gas. This data element is required. Please enter the required data. |
| Y223 | Y | Screen Error | Number of days missing data procedures were used for average carbon content of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y225 | Y | Data Completeness | Annual CO2 emissions from this flare. This data element is required. Please enter the required data. |
| Y226 | Y | Screen Error | Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y228 | Y | Data Completeness | Frequency of measurement data. This data element is required. Please make a selection. |
| Y229 | Y | Data Completeness | Annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y230 | Y | Screen Error | Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y232 | Y | Data Completeness | Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y233 | Y | Screen Error | Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y235 | Y | Data Completeness | Annual average CO2 concentration. This data element is required. Please enter the required data. |
| Y236 | Y | Screen Error | Annual average CO2 concentration. This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. |
| Y238 | Y | Data Completeness | Method used to determine the annual average CO2 concentration. This data element is required. |
| Y239 | Y | Data Completeness | Number of days missing data procedures were used for annual average CO2 concentration. This data element is required. Please enter the required data. |
| Y240 | Y | Screen Error | Number of days missing data procedures were used for annual average CO2 concentration. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y242 | Y | Data Completeness | Annual CO2 emissions from this flare. This data element is required. Please enter the required data. |
| Y243 | Y | Screen Error | Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y245 | Y | Data Completeness | Frequency of measurement data. This data element is required. Please make a selection. |
| Y246 | Y | Data Completeness | Annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y247 | Y | Screen Error | Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y249 | Y | Data Completeness | Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y250 | Y | Screen Error | Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y252 | Y | Data Completeness | Conditions on which the annual volume of flare gas was determined. This data element is required. Please make a selection. |
| Y253 | Y | Data Completeness | Annual average higher heating value of the flare gas combusted. This data element is required. Please enter the required data. |
| Y254 | Y | Screen Error | Annual average higher heating value of the flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y256 | Y | Data Completeness | Method used to determine the annual average higher heating value. This data element is required. |
| Y257 | Y | Data Completeness | Number of days missing data procedures were used for annual average higher heating value. This data element is required. Please enter the required data. |
| Y258 | Y | Screen Error | Number of days missing data procedures were used for annual average higher heating value. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y260 | Y | Data Completeness | Conditions on which the annual average higher heating value was determined. This data element is required. Please make a selection. |
| Y261 | Y | Data Completeness | Annual CO2 emissions from this flare. This data element is required. Please enter the required data. |
| Y262 | Y | Screen Error | Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y264 | Y | Data Completeness | Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. This data element is required. Please enter the required data. |
| Y265 | Y | Screen Error | Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y267 | Y | Screen Error | Material type. This data element is required. Please make a selection or click CANCEL. |
| Y268 | Y | Screen Error | Material type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y269 | Y | Screen Error | Control device used to reduce emissions from the loading of the material. This data element is required. Please make a selection or click CANCEL. |
| Y270 | Y | Screen Error | Control device used to reduce emissions from the loading of the material. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y271 | Y | Screen Error | Vessel type. This data element is required. Please make a selection or click CANCEL. |
| Y271a | Y | Screen Error | Vessel type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y272 | Y | Data Completeness | Cumulative CH4 emissions for loading operations. This data element is required. Please enter the required data. Enter 0 if your facility has no loading operations or if the 0.5 volume % or greater requirement is not met. |
| Y273 | Y | Screen Error | Cumulative CH4 emissions for loading operations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. Enter 0 if your facility has no loading operations or if the 0.5 volume % or greater requirement is not met. |
| Y276 | Y | Data Completeness | Operation type associated with this process vent. This data element is required. |
| Y277 | Y | Data Completeness | Control device used to reduce methane (and other organic) emissions from the unit. This data element is required. Please make a selection. |
| Y278 | Y | Data Completeness | Control device used to reduce methane (and other organic) emissions from the unit. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y279 | Y | Screen Error | Please select the greenhouse gas(es) you will report for this process vent, or click CANCEL. |
| Y282 | Y | Data Completeness | Annual volumetric flow discharged to the atmosphere. This data element is required. |
| Y282-2 | Y | Data Completeness | Annual volumetric flow discharged to the atmosphere. This data element is required. |
| Y283 | Y | Screen Error | Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y283-2 | Y | Screen Error | Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y285 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. This data element is required. |
| Y285-2 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. This data element is required. |
| Y286 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y286-2 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y288 | Y | Screen Error | Number of venting events, if vent is intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y288-2 | Y | Screen Error | Number of venting events, if vent is intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y288-3 | Y | Data Completeness | Number of venting events, if vent is intermittent. This data element is required. |
| Y290 | Y | Data Completeness | Cumulative venting time. This data element is required. Please enter the required data. |
| Y290-2 | Y | Data Completeness | Cumulative venting time. This data element is required. Please enter the required data. |
| Y291 | Y | Screen Error | Cumulative venting time. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y291-2 | Y | Screen Error | Cumulative venting time. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y293 | Y | Data Completeness | Annual CO2 emissions from this process vent. This data element is required. Please enter the required data. |
| Y294 | Y | Screen Error | Annual CO2 emissions from this process vent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y296 | Y | Data Completeness | Annual average mole fraction of CO2. This data element is required. Please enter the required data. |
| Y297 | Y | Screen Error | Annual average mole fraction of CO2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y299 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CO2. This data element is required. |
| Y300 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CO2. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y301 | Y | Data Completeness | Annual CH4 emissions from this process vent. This data element is required. Please enter the required data. |
| Y302 | Y | Screen Error | Annual CH4 emissions from this process vent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y304 | Y | Data Completeness | Annual average mole fraction of CH4. This data element is required. Please enter the required data. |
| Y304-2 | Y | Data Completeness | Annual average mole fraction of CH4. This data element is required. Please enter the required data. |
| Y305 | Y | Screen Error | Annual average mole fraction of CH4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y305-2 | Y | Screen Error | Annual average mole fraction of CH4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y307 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CH4. This data element is required. |
| Y307-2 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CH4. This data element is required. |
| Y308 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CH4. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y308-2 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CH4. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y308-3 | Y | Data Completeness | Inputs for {1} drumset is required, select the GO button to enter the cumulative CH4 emissions from all delayed coking units at the facility for the {1} drumset. |
| Y309 | Y | Data Completeness | Annual N2O emissions from this process vent. This data element is required. Please enter the required data. |
| Y310 | Y | Screen Error | Annual N2O emissions from this process vent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y312 | Y | Data Completeness | Annual average mole fraction of N2O. This data element is required. Please enter the required data. |
| Y313 | Y | Screen Error | Annual average mole fraction of N2O. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y315 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of N2O. This data element is required. |
| Y316 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of N2O. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y317 | Y | Data Completeness | Annual CO2 emissions from sour gas sent off-site. This data element is required. Please enter the required data. |
| Y318 | Y | Screen Error | Annual CO2 emissions from sour gas sent off-site. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y321 | Y | Screen Error | If measured, number of hours missing data procedures were used for annual volume of sour gas fed. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y325 | Y | Screen Error | If measured, number of hours missing data procedures were used for annual average mole fraction of carbon in the sour gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y327 | Y | Screen Error | Sulfur Recovery Plant Name or ID. This data element is required. Please enter the required data or click CANCEL. |
| Y328 | Y | Screen Error | Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. |
| Y329 | Y | Screen Error | Sulfur Recovery Plant Name or ID. This data element is required. Please enter the required data or click CANCEL. |
| Y330 | Y | Data Completeness | Maximum rated throughput of the sulfur recovery plant. This data element is required. Please enter the required data. |
| Y331 | Y | Screen Error | Maximum rated throughput of the sulfur recovery plant. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y333 | Y | Data Completeness | Type of sulfur recovery plant. This data element is required. |
| Y334 | Y | Data Completeness | Type of sulfur recovery plant. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y335 | Y | Screen Error | Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y336 | Y | Screen Error | Is the recycled flow rate and carbon content of recycled tail gas included in the measured volumetric flow and carbon mole fraction data? This data element is required. Please make a selection or click CANCEL. |
| Y337 | Y | Screen Error | Is a correction for CO2 emissions in the tail gas used? This data element is required. Please make a selection or click CANCEL. |
| Y338 | Y | Screen Error | Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. |
| Y339 | Y | Screen Error | Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y340 | Y | Screen Error | Is the recycled flow rate and carbon content of recycled tail gas included in the measured volumetric flow and carbon mole fraction data? This data element is required. Please make a selection or click CANCEL. |
| Y341 | Y | Screen Error | Is a correction for CO2 emissions in the tail gas used? This data element is required. Please make a selection or click CANCEL. |
| Y342 | Y | Data Completeness | Annual CO2 emissions from this sulfur recovery plant. This data element is required. Please enter the required data. |
| Y343 | Y | Screen Error | Annual CO2 emissions from this sulfur recovery plant. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y346 | Y | Screen Error | If measured, number of hours missing data procedures were used for annual volume of sour gas fed. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y350 | Y | Screen Error | If measured, number of hours missing data procedures were used for annual average mole fraction of carbon in the sour gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y353 | Y | Screen Error | Annual volume of recycled tail gas. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y355 | Y | Data Completeness | If measured, method used to measure the annual volume of recycled tail gas. You have provided a value for annual volume of recycled tail gas but did not specify a measurement method. |
| Y356 | Y | Data Completeness | If measured, method used to measure the annual volume of recycled tail gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y357 | Y | Data Completeness | If measured, number of hours missing data procedures were used for annual volume of recycled tail gas. This data element is required. You have provided a value for annual volume of recycled tail gas but did not specify number of hours missing data procedures were used. |
| Y358 | Y | Screen Error | If measured, number of hours missing data procedures were used for annual volume of recycled tail gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y361 | Y | Screen Error | Annual average mole fraction of carbon in the tail gas. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y363 | Y | Data Completeness | If measured, method used to measure the annual average mole fraction of carbon in the tail gas. You have provided a value for annual average mole fraction of carbon in the tail gas but did not specify a measurement method. |
| Y364 | Y | Data Completeness | If measured, method used to measure the annual average mole fraction of carbon in the tail gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y365 | Y | Data Completeness | If measured, number of hours missing data procedures were used for annual average mole fraction of carbon in the sour gas. You have provided a value for annual average mole fraction of carbon in the tail gas but did not specify number of hours missing data procedures were used. |
| Y366 | Y | Screen Error | If measured, number of hours missing data procedures were used for annual average mole fraction of carbon in the sour gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y368 | Y | Data Completeness | Annual volumetric flow discharged to the atmosphere. This data element is required. Please enter the required data. |
| Y369 | Y | Screen Error | Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y371 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. This data element is required. |
| Y372 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y374 | Y | Screen Error | Number of cumulative venting events for all relevant vents, if vents are intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y379 | Y | Data Completeness | Cumulative venting time for all relevant vents. This data element is required. Please enter the required data. |
| Y380 | Y | Screen Error | Cumulative venting time for all relevant vents. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y382 | Y | Screen Error | Correction factor used to calculate CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y383 | Y | Data Completeness | Method used to determine correction factor used to calculate the CO2 emissions. This data element is required. |
| Y384 | Y | Data Completeness | Method used to determine correction factor used to calculate the CO2 emissions. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y385 | Y | Data Completeness | You have selected Subpart Y for reporting, but you have not yet indicated if the facility received stored liquids other than unstabilized crude during the reporting year. This data element is required. Please make a selection. |
| Y386 | Y | Data Completeness | You have selected Subpart Y for reporting, but you have not yet indicated if the facility received unstabilized crude oil during the reporting year. This data element is required. Please make a selection. |
| Y387 | Y | Data Completeness | You have indicated that the facility received liquids other than unstabilized crude oil, however you have not yet selected an emissions calculation method.. This data element is required. Please make a selection. |
| Y388 | Y | Data Completeness | You have indicated that the facility received unstabilized crude oil, however you have not yet selected an emissions calculation method. This data element is required. Please make a selection. |
| Y395 | Y | Data Completeness | Method used to measure tank-specific methane composition in the vapor. This data element is required. |
| Y396 | Y | Data Completeness | Method used to measure tank-specific methane composition in the vapor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y398 | Y | Screen Error | If measured, number of hours missing data procedures were used to measure tank-specific methane composition. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y400 | Y | Data Completeness | Method used to measure the gas generation rate. This data element is required. |
| Y400a | Y | Data Completeness | Specify procedures. This data element is required. Please enter the required data. |
| Y400b | Y | Data Completeness | Specify method. This data element is required. Please enter the required data. |
| Y402 | Y | Screen Error | If measured, number of hours missing data procedures were used to measure the gas generation rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y404 | Y | Data Completeness | Basis for the average mole fraction of CH4 in vent gas. This data element is required. |
| Y405 | Y | Data Completeness | Basis for the average mole fraction of CH4 in vent gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y406 | Y | Data Completeness | Annual CH4 emissions from unstabilized crude oil storage. This data element is required. Please enter the required data. |
| Y407 | Y | Screen Error | Annual CH4 emissions from unstabilized crude oil storage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y409 | Y | Data Completeness | Annual CH4 emissions from stored liquids other than unstabilized crude oil storage. This data element is required. Please enter the required data. |
| Y410 | Y | Screen Error | Annual CH4 emissions from stored liquids other than unstabilized crude oil. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y412 | Y | Screen Error | Coking drum set name or ID. This data element is required. Please enter the required data or click CANCEL. |
| Y413 | Y | Data Completeness | Number of coking drums in the set, {1}. This data element is required. Please enter the required data. |
| Y414 | Y | Screen Error | Number of coking drums in the set. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y416 | Y | Data Completeness | Basis for the mole fraction of methane in the coking gas in {1}. This data element is required. |
| Y417 | Y | Data Completeness | Basis for the mole fraction of methane in the coking gas in {1}. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y418 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate in {1}. This data element is required. |
| Y419 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate in {1}. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y420 | Y | Data Completeness | Cumulative CH4 emissions from delayed coking. This data element is required. Please enter the required data. |
| Y421 | Y | Screen Error | Cumulative CH4 emissions from delayed coking. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y423 | Y | Screen Error | Annual average concentration of each carbon-containing compound (other than CO2). This data element is required. Please enter the required data or click CANCEL. |
| Y424 | Y | Screen Error | Annual average concentration of each carbon-containing compound (other than CO2). This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. |
| Y426 | Y | Screen Error | Method(s) used to determine the annual average concentration of the carbon-containing compound(s). This data element is required. |
| Y426a | Y | Screen Error | Method(s) used to determine the annual average concentration of the carbon-containing compound(s). You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y427 | Y | Screen Error | Number of days missing data procedures were used for annual average concentration of carbon in the compound. This data element is required. Please enter the required data or click CANCEL. |
| Y428 | Y | Screen Error | Number of days missing data procedures were used for annual average concentration of carbon in the compound. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y430 | Y | Data Completeness | Annual CH4 emissions from this flare. This data element is required. Please enter the required data. |
| Y431 | Y | Screen Error | Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y436 | Y | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. |
| Y437 | Y | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y438 | Y | Data Completeness | Annual N2O emissions from this flare. This data element is required. Please enter the required data. |
| Y439 | Y | Screen Error | Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y442 | Y | Data Completeness | Carbon-containing compound (other than carbon dioxide) in flare gas stream. You must enter at least one carbon-containing compound other than carbon dioxide in flare gas stream. This is a required field. |
| Y445 | Y | Data Completeness | You have added a delayed coking unit, but have not entered any coke drums for this unit. |
| Y446 | Y | Data Completeness | You have selected Subpart Y for reporting, but you have not yet added a flare. |
| Y447 | Y | Data Completeness | Basis for the methane emission factor value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y448 | Y | Data Completeness | Method used to measure the annual carbon content of green coke fed to the unit. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y449 | Y | Data Completeness | Method used to measure the annual carbon content of marketable coke produced. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y450 | Y | Data Completeness | Describe the method that was used to measure annual average percent N2 in exhaust gas stream. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y451 | Y | Data Completeness | Describe the method that was used to measure annual average percent N2 in oxygen-enriched gas stream inlet. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y452 | Y | Data Completeness | Method(s) used to determine the molecular weight of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y453 | Y | Data Completeness | Method(s) used to determine the carbon content of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y454 | Y | Data Completeness | Method used to determine the annual average CO2 concentration. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y455 | Y | Data Completeness | Method used to determine the annual average higher heating value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y456 | Y | Data Completeness | You have reported cumulative CH4 emissions from all delayed coking units at the facility, but have not entered any coke drum sets. |
| Y457 | Y | Data Completeness | You have reported cumulative CH4 emissions from all delayed coking units at the facility, but have not entered any delayed coking units. |
| Y458 | Y | Data Completeness | You have reported cumulative CH4 emissions from loading operations, but have not entered a vessel type. |
| Y459 | Y | Data Completeness | You are using Equations Y-18 and Y-19 as the emission calculation method for a delayed coking unit, but have not entered any process vents with an operation type of \'delayed coking\'. |
| Y460 | Y | Data Completeness | Annual average mole fraction of CH4. This data element is required. Please enter the required data. |
| Y461 | Y | Screen Error | Annual average mole fraction of CH4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y463 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CH4. This data element is required. |
| Y464 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CH4. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y465 | Y | Data Completeness | Annual average mole fraction of CO2. This data element is required. Please enter the required data. |
| Y466 | Y | Screen Error | Annual average mole fraction of CO2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y468 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CO2. This data element is required. |
| Y469 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CO2. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y470 | Y | Data Completeness | Average coke burn-off quantity per cycle or measurement period. This data element is required. Please enter the required data. |
| Y471 | Y | Data Completeness | Annual volumetric flow discharged to the atmosphere. This data element is required. Please enter the required data. |
| Y472 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. This data element is required. |
| Y473 | Y | Data Completeness | Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y474 | Y | Screen Error | Number of cumulative venting events for all relevant vents, if vents are intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y476 | Y | Screen Error | Cumulative venting time for all relevant vents. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| Y481 | Y | Data Completeness | Annual average mole fraction of CO2. This data element is required. Please enter the required data. |
| Y482 | Y | Screen Error | Annual average mole fraction of CO2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y484 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CO2. This data element is required. |
| Y485 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CO2. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y486 | Y | Data Completeness | Annual average mole fraction of CH4. This data element is required. Please enter the required data. |
| Y487 | Y | Screen Error | Annual average mole fraction of CH4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y489 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CH4. This data element is required. |
| Y490 | Y | Data Completeness | Method used to measure or estimate the annual average mole fraction of CH4. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y491 | Y | Data Completeness | Flare type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y495 | Y | Data Completeness | Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. |
| Y496 | Y | Data Completeness | Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. |
| Y497 | Y | Data Completeness | Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. |
| Y498 | Y | Data Completeness | Describe the manufacturer/s recommended method that was used for annual average volumetric flow rate of exhaust gas. This data element is required. Please enter the required data. |
| Y499 | Y | Data Completeness | Describe the manufacturer/s recommended method that was used for annual average percent CO2 in exhaust gas stream. This data element is required. Please enter the required data. |
| Y500 | Y | Data Completeness | Describe the manufacturer/s recommended method that was used for annual average percent CO in exhaust gas stream. This data element is required. Please enter the required data. |
| Y501 | Y | Data Completeness | Describe the manufacturer/s recommended method that was used for annual average percent O2 in exhaust gas stream. This data element is required. Please enter the required data. |
| Y502 | Y | Data Completeness | If measured, method used to measure the annual average mole fraction of carbon in the sour gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y503 | Y | Data Completeness | If measured, method used to measure the annual average mole fraction of carbon in the sour gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y505 | Y | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y506 | Y | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y507 | Y | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y511 | Y | Data Completeness | Annual CH4 emissions from this flare. This data element is required. Please enter the required data. |
| Y512 | Y | Data Completeness | Annual CH4 emissions from this flare. This data element is required. Please enter the required data. |
| Y513 | Y | Data Completeness | Annual CH4 emissions from this flare. This data element is required. Please enter the required data. |
| Y514 | Y | Screen Error | Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y515 | Y | Screen Error | Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y516 | Y | Screen Error | Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y517 | Y | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. |
| Y518 | Y | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. |
| Y519 | Y | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. |
| Y520 | Y | Data Completeness | Annual N2O emissions from this flare. This data element is required. Please enter the required data. |
| Y521 | Y | Data Completeness | Annual N2O emissions from this flare. This data element is required. Please enter the required data. |
| Y522 | Y | Data Completeness | Annual N2O emissions from this flare. This data element is required. Please enter the required data . |
| Y526 | Y | Screen Error | Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y527 | Y | Screen Error | Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y528 | Y | Screen Error | Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y529 | Y | Screen Error | Indication of stored liquids other than unstabilized crude oil storage. This data element is required. Please make a selection or click CANCEL. |
| Y530 | Y | Screen Error | Indication of sour gas sent off-site. This data element is required. Please enter the required data or click CANCEL. |
| Y531 | Y | Screen Error | Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y532 | Y | Screen Error | Method used to calculate the CH4 emissions from equipment leaks. This data element is required. Please make a selection or click CANCEL. |
| Y533 | Y | Screen Error | Uncontrolled blowdown systems calculation method. This data element is required. Please make a selection or click CANCEL. |
| Y534 | Y | Data Completeness | Cumulative venting time for all relevant vents. This data element is required. Please enter the required data. |
| Y535 | Y | Screen Error | Stored liquids other than unstabilized Crude Oil - Emissions Calculation. This data element is required. Please make a selection or click CANCEL. |
| Y536 | Y | Screen Error | Indication of unstabilized crude oil storage. This data element is required. Please make a selection or click CANCEL. |
| Y537 | Y | Screen Error | Unstabilized Crude Oil Storage - Emissions Calculation. This data element is required. Please make a selection or click CANCEL. |
| Y538 | Y | Screen Error | Fuel Type. This data element is required. Please enter the required data or click CANCEL. |
| Y539 | Y | Screen Error | CO2 emission factor. This data element is required. Please enter the required data or click CANCEL. |
| Y540 | Y | Screen Error | CO2 emission factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y541 | Y | Screen Error | The mole fraction of methane in coking gas. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click CANCEL. |
| Y542 | Y | Data Completeness | The mole fraction of methane in coking gas in {1}. This data element is required. |
| Y544 | Y | Screen Error | Tank-specific methane composition data used to estimate the cumulative CH4 emissions for storage tanks used to process unstabilized crude oil. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click CANCEL. |
| Y545 | Y | Data Completeness | Tank-specific methane composition data used to estimate the cumulative CH4 emissions for storage tanks used to process unstabilized crude oil. This data element is required. |
| Y547 | Y | Screen Error | Gas generation rate used to estimate the cumulative CH4 emissions for storage tanks used to process unstabilized crude oil. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| Y548 | Y | Data Completeness | Gas generation rate used to estimate the cumulative CH4 emissions for storage tanks used to process unstabilized crude oil. This data element is required. |
| Y550 | Y | Data Quality | The mole fraction of methane in coking gas for delayed coking units should not be included in annual reports prior to Reporting Year 2014. This data element (MoleFractionOfMethaneInCokeGas) was deferred from reporting in prior years and is only required to be reported in Reporting Year 2014 and following years. |
| Y551 | Y | Data Quality | The number of atmospheric crude oil distillation columns; the cumulative number of catalytic cracking units, coking units (delayed or fluid), hydrocracking, and full-range distillation columns (including depropanizer and debutanizer distillation columns); the cumulative number of hydrotreating/hydrorefining units, catalytic reforming units, and visbreaking units; the total number of hydrogen plants; and/or the total number of fuel gas systems at the facility should not be included in annual reports prior to Reporting Year 2014 if you employed the 98.253(l)(2) method for estimating emissions. These data elements (NCD, NPU1, NPU2, NH2, and NFGS) were deferred from reporting in prior years if the 98.253(l)(2) method for estimating emissions was employed and so are only required to be reported in Reporting Year 2014 and following years. |
| Y552 | Y | Data Quality | The value of correction for sulfur plants employing Equation Y-12 and use of a unit-specific correction for tail gas should not be included in annual reports prior to Reporting Year 2014. This data element (ValueOfCorrection) was deferred from reporting in prior years and is only required to be reported in Reporting Year 2014 and following years. |
| Y553 | Y | Data Quality | The tank-specific methane composition data used to estimate the cumulative CH4 emissions for storage tanks used to process unstabilized crude oil should not be included in annual reports prior to Reporting Year 2014. This data element (CH4VaporCompositionData) was deferred from reporting in prior years and is only required to be reported in Reporting Year 2014 and following years. |
| Y554 | Y | Data Quality | The gas generation rate used to estimate the cumulative CH4 emissions for storage tanks used to process unstabilized crude oil should not be included in annual reports prior to Reporting Year 2014. This data element (GasGenerationRateData) was deferred from reporting in prior years and is only required to be reported in Reporting Year 2014 and following years. |
| Y555 | Y | Data Completeness | Is the flare serviced by a flare gas recovery system? This data element is required. Please make a selection. |
| Y590 | Y | Data Completeness | Annual mass of flare gas combusted. This data element is required. Please enter the required data. |
| Y591 | Y | Screen Error | Annual mass of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y593 | Y | Data Completeness | Method(s) used to determine the mass of flare gas. This data element is required. Please enter the required data. |
| Y594 | Y | Data Completeness | Number of days missing data procedures were used for annual mass of flare gas combusted. This data element is required. Please enter the required data. |
| Y595 | Y | Screen Error | Number of days missing data procedures were used for annual mass of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y600 | Y | Data Completeness | You have added vessel type {1}, but have not yet entered any materials. You must add at least one material for each vessel. |
| Y700 | Y | Screen Error | Indication of loading operations. This data element is required. Please enter the required data or click CANCEL. |
| Y701 | Y | Data Completeness | Indication of loading operations. This data element is required. Please enter the required data. |
| Y777 | Y | Screen Error | The coking drum set "Name or ID" you are attempting to add is invalid because it already exists for this facility. Please enter a unique name, or click CANCEL. |
| Y778 | Y | Screen Error | The emissions from this set of coke drums calculated using 98.253(i)(1) [Equations Y-18 and Y-19]. You must select this value before continuing or click CANCEL. |
| Y779 | Y | Data Completeness | You have selected Subpart Y for reporting, but for Loading Operations you have not yet indicated if you perform loading operations for crude oil, intermediate, or product, for which the vapor-phase concentration of methane is 0.5 volume percent or more. This data element is required. Please make a selection. |
| Y780 | Y | Data Completeness | You have indicated that you perform loading operations for crude oil, intermediate, or product, for which the vapor-phase concentration of methane is 0.5 volume percent or more, but you have not added any vessels for loading operations. You must add a vessel type with at least one material. |
| Y800 | Y | Screen Error | Indication of delayed coking operations. This data element is required. Please enter the required data or click CANCEL. |
| Y801 | Y | Data Completeness | You have selected Subpart Y for reporting, but for you have not yet indicated if the facility performs delayed coking operations for each set of coke drums or vessels of the same size. This data element is required. Please enter the required data. |
| Y802 | Y | Data Completeness | The number of delayed coking drums must be greater than or equal to 2 times the number of delayed coking units (current number of delayed coking drums: {1}; current number of delayed coking units: {2}). |
| Y880 | Y | Data Completeness | You have indicated that you perform delayed coking operations for each set of coke drums or vessels of the same size, but you have not added any coke drum sets, for delayed coking. You must add a coking drum set. |
| Y883 | Y | Screen Error | Maximum rated throughput. This data element is required. Please enter the required data. |
| Y884 | Y | Screen Error | Maximum rated throughput. You must enter a value that is greater than zero. You must correct the current value before continuing. |
| Y886 | Y | Screen Error | Total number of associated delayed coking vessels (or coke drums). This data element is required. Please enter the required data. |
| Y888 | Y | Screen Error | Basis for the typical dry mass of coke at the end of the coking cycle. This data element is required. Please make a selection or click CANCEL. |
| Y889 | Y | Screen Error | Method used to estimate the average temperature of the coke bed. This data element is required. Please make a selection or click CANCEL. |
| Y890 | Y | Screen Error | Type of emission factor was used in Equation Y-18f. This data element is required. Please make a selection or click CANCEL. |
| Y891 | Y | Data Completeness | Annual quantity of coke produced. This data element is required. Please enter the required data. |
| Y892 | Y | Screen Error | Annual quantity of coke produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
Overview
Content Tools
ThemeBuilder
Tasks