Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| CODE | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| CEMSML-1 | R | Data Completeness | Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). |
| CEMSML-2 | R | Data Completeness | CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. |
| CML-001 | R | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-002 | R | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-007 | R | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-007X | R | Screen Error | Total carbon dioxide (CO2) emissions measured by the CEMS (or applicable Part 75 methodology). This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-012 | R | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. |
| CML-013 | R | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-014 | R | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-016 | R | Screen Error | Carbon dioxide emissions in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-018 | R | Screen Error | Carbon dioxide emissions in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-020 | R | Screen Error | Carbon dioxide emissions in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-022 | R | Screen Error | Carbon dioxide emissions in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-027a | R | Data Completeness | Fraction of nitrous oxide emissions from CML. This data element is required. |
| CML-034 | R | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-035 | R | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-036 | R | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-037 | R | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-038 | R | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-039 | R | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-040 | R | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-041 | R | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-043 | R | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. |
| CML-046 | R | Data Completeness | CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. |
| CML-047a | R | Data Completeness | Fraction of methane emissions from CML. This data element is required. |
| CML-051 | R | Data Completeness | Total Non-biogenic carbon dioxide emissions. This data element is required. |
| CML-052 | R | Data Completeness | Total Biogenic carbon dioxide emissions. This data element is required. |
| CML-053 | R | Data Completeness | Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-054 | R | Data Completeness | Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-055 | R | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-056 | R | Screen Error | Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-057 | R | Data Completeness | Total number of source operating hours in the reporting year. This data element is required. |
| CML-058 | R | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. |
| CML-059 | R | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is less than the End Date. |
| CML-060 | R | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-061 | R | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-062 | R | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-063 | R | Data Completeness | Carbon dioxide emissions measured in Quarter 1. This data element is required. |
| CML-064 | R | Screen Error | Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-065 | R | Data Completeness | Carbon dioxide emissions measured in Quarter 2. This data element is required. |
| CML-066 | R | Screen Error | Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-067 | R | Data Completeness | Carbon dioxide emissions measured in Quarter 3. This data element is required. |
| CML-068 | R | Screen Error | Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-069 | R | Data Completeness | Carbon dioxide emissions measured in Quarter 4. This data element is required. |
| CML-070 | R | Screen Error | Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-071 | R | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-072 | R | Data Completeness | Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-073 | R | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-074 | R | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-075 | R | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-076 | R | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-077 | R | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-078 | R | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-082 | R | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-083 | R | Screen Error | Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. |
| CML-086 | R | Screen Error | The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-087 | R | Screen Error | The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-088 | R | Screen Error | The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| CML-089 | R | Screen Error | The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| IVT-R001 | R | Data Completeness | You have not yet uploaded an equation inputs form. Please upload an equation inputs form for this Lead Production facility. |
| IVT-R002 | R | Screen Error | GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. |
| IVT-R003 | R | Screen Error | Reporting Period. This data element is required and must be equal to the expected reporting year. |
| IVT-R004 | R | Screen Error | Smelting Furnace Associated with Feedstock. This data element is required. |
| IVT-R005 | R | Screen Error | Name of Each Carbon-Containing Material Fed, Charged, or Otherwise Introduced to a Smelting Furnace. This data element is required. |
| IVT-R006 | R | Screen Error | Feedstock Type. This data element is required. |
| IVT-R007 | R | Screen Error | Annual Mass of Feedstock Charged to the Smelting Furnace. This data element is required. |
| IVT-R008 | R | Screen Error | Annual Mass of Feedstock Charged to the Smelting Furnace. You must enter a value that is greater than or equal to zero. |
| IVT-R010 | R | Screen Error | Carbon Content of the Feedstock, from the Carbon Analysis. This data element is required. |
| IVT-R011 | R | Screen Error | Carbon Content of the Feedstock, from the Carbon Analysis. You must enter a value that is greater than or equal to zero and less than or equal to one. |
| IVT-R014 | R | Screen Error | Multiple rows were found for {1}, {2}, {3} in the inputs form. |
| IVT-R015 | R | Screen Error | No corresponding row was found in the reporting form for {1}, {2}, {3} in the inputs form. |
| IVT-R016 | R | Screen Error | No corresponding row was found in the inputs form for {1}, {2}, {3} in the reporting form. |
| R0006 | R | Screen Error | GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. |
| R0007 | R | Screen Error | Reporting Period. This data element is required and must be equal to the expected reporting year. |
| R0008 | R | Data Completeness | Is a CEMS used to measure CO2 emissions? This data element is required. |
| R0009 | R | Data Completeness | CEMS Only - Total number of smelting furnaces at the facility. This data element is required. |
| R0011 | R | Data Completeness | CEMS Only - Total annual lead production capacity for the facility (short tons). This data element is required. |
| R0013 | R | Data Completeness | No CEMS - Total number of smelting furnaces at the facility. This data element is required. |
| R0015 | R | Data Completeness | No CEMS - Total annual lead production capacity for the facility (short tons). This data element is required. |
| R0017 | R | Data Completeness | Lead Product Produced. This data element is required. |
| R0018 | R | Data Completeness | Product Description. This data element is required. |
| R0019 | R | Data Completeness | Annual Production of Lead Product Produced at the facility. This data element is required. |
| R0021 | R | Data Completeness | Furnace Name/ID. This data element is required. |
| R0022 | R | Data Completeness | Annual lead production capacity. This data element is required. |
| R0023 | R | Screen Error | Annual lead production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| R0024 | R | Data Completeness | Name of Each Carbon-Containing Material Fed, Charged, or Otherwise Introduced to a Furnace. This data element is required |
| R0025 | R | Data Completeness | Smelting Furnace Associated with Feedstock. This data element is required. |
| R0026 | R | Data Completeness | Feedstock Type. This data element is required |
| R0027 | R | Data Completeness | "Other" Feedstock Description. This data element is required. |
| R0028 | R | Data Completeness | Substitute Data Procedure for Monthly Mass of Material. This data element is required. |
| R0029 | R | Data Completeness | "Other" Substitute Data Procedure Description. This data element is required. |
| R0030 | R | Data Completeness | Number of Months that Missing Data Procedures Were Followed to Determine the Monthly Mass of Material. This data element is required. |
| R0031 | R | Data Completeness | Method Used to Determine the Carbon Content of the Carbon-Containing Material. This data element is required. |
| R0032 | R | Data Completeness | Number of Months that Missing Data Procedures Were Followed or Analysis was Repeated to Determine the Carbon Content of the Carbon-Containing Material(s) [{1}]. This data element is required. |
| R0034 | R | Data Completeness | Annual CO2 emissions for the furnace. This data element is required. |
| R0037 | R | Screen Error | Multiple rows were found for {1}, {2}, {3} in the reporting form. |
| R004 | R | Screen Error | File size is greater than the maximum of 2 MB. |
| R005 | R | Data Completeness | You have not uploaded a reporting form file. |
Overview
Content Tools
ThemeBuilder
Tasks