Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| CODE | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| CEMSML-1 | GG | Data Completeness | Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). |
| CEMSML-2 | GG | Data Completeness | CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. |
| CML-001 | GG | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-002 | GG | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-007 | GG | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-007X | GG | Screen Error | Total carbon dioxide (CO2) emissions measured by the CEMS (or applicable Part 75 methodology). This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-012 | GG | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. |
| CML-013 | GG | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-014 | GG | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-016 | GG | Screen Error | Carbon dioxide emissions in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-018 | GG | Screen Error | Carbon dioxide emissions in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-020 | GG | Screen Error | Carbon dioxide emissions in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-022 | GG | Screen Error | Carbon dioxide emissions in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-027a | GG | Data Completeness | Fraction of nitrous oxide emissions from CML. This data element is required. |
| CML-034 | GG | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-035 | GG | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-036 | GG | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-037 | GG | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-038 | GG | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-039 | GG | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-040 | GG | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-041 | GG | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-043 | GG | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. |
| CML-046 | GG | Data Completeness | CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. |
| CML-047a | GG | Data Completeness | Fraction of methane emissions from CML. This data element is required. |
| CML-051 | GG | Data Completeness | Total Non-biogenic carbon dioxide emissions. This data element is required. |
| CML-052 | GG | Data Completeness | Total Biogenic carbon dioxide emissions. This data element is required. |
| CML-053 | GG | Data Completeness | Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-054 | GG | Data Completeness | Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-055 | GG | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-056 | GG | Screen Error | Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-057 | GG | Data Completeness | Total number of source operating hours in the reporting year. This data element is required. |
| CML-058 | GG | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. |
| CML-059 | GG | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is less than the End Date. |
| CML-060 | GG | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-061 | GG | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-062 | GG | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-063 | GG | Data Completeness | Carbon dioxide emissions measured in Quarter 1. This data element is required. |
| CML-064 | GG | Screen Error | Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-065 | GG | Data Completeness | Carbon dioxide emissions measured in Quarter 2. This data element is required. |
| CML-066 | GG | Screen Error | Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-067 | GG | Data Completeness | Carbon dioxide emissions measured in Quarter 3. This data element is required. |
| CML-068 | GG | Screen Error | Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-069 | GG | Data Completeness | Carbon dioxide emissions measured in Quarter 4. This data element is required. |
| CML-070 | GG | Screen Error | Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-071 | GG | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-072 | GG | Data Completeness | Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-073 | GG | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-074 | GG | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-075 | GG | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-076 | GG | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-077 | GG | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-078 | GG | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-082 | GG | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-083 | GG | Screen Error | Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. |
| CML-086 | GG | Screen Error | The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-087 | GG | Screen Error | The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-088 | GG | Screen Error | The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| CML-089 | GG | Screen Error | The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| GG-EU-1 | GG | Data Completeness | You have added Subpart GG, but have not yet added a kiln or furnace. |
| GG006 | GG | Data Completeness | Annual zinc production capacity. This data is required. |
| GG006-1 | GG | Data Completeness | Annual zinc production capacity. This data is required. |
| GG006-2 | GG | Data Completeness | Annual zinc production capacity. This data is required. |
| GG007 | GG | Screen Error | Annual zinc production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| GG009 | GG | Data Completeness | Number of waelz kilns. This data element is required. |
| GG010 | GG | Data Completeness | Number of eletrothermic furnaces. This data element is required. |
| GG011 | GG | Data Completeness | Zinc Product. This data element for row(s) [{1}] is required when its row is checked. |
| GG012 | GG | Screen Error | Annual Production of the Product. You must enter a value that is greater than or equal to zero for row(s) [{1}]. You must correct the current value before continuing. |
| GG012GG012 | GG | Screen Error | Annual Production of the Product. You must enter a value that is greater than or equal to zero for row(s) [{1}]. You must correct the current value before continuing. |
| GG014 | GG | Data Completeness | Zinc Product. This data element is required when its row is checked. |
| GG015 | GG | Screen Error | Annual Production of the Product. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| GG017 | GG | Data Completeness | Zinc Product. This data element is required when its row is checked. |
| GG018 | GG | Screen Error | Annual Production of the Product. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| GG020 | GG | Data Completeness | Zinc Product. This data element is required when its row is checked. |
| GG021 | GG | Screen Error | Annual Production of the Product. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| GG023 | GG | Data Completeness | Zinc Product. This data element is required when its row is checked. |
| GG024 | GG | Screen Error | Annual Production of the Product. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| GG030-1 | GG | Screen Error | Unit Name (Unique Name Identifier). This data element is required. Please enter the required data or click CANCEL. |
| GG030-2 | GG | Screen Error | Unit Name (Unique Name Identifier). This data element is required. Please enter the required data or click CANCEL. |
| GG031-1 | GG | Screen Error | Unit Type. This data element is required and must be either \'Waelz Kiln\' or \'Electrothermic Furnace \'. Please enter the required data or click CANCEL. |
| GG031-2 | GG | Screen Error | Unit Type. This data element is required and must be either \'Waelz Kiln\' or \'Electrothermic Furnace \'. Please enter the required data or click CANCEL. |
| GG032 | GG | Data Completeness | You have added a kiln or furnace, but have not yet added an Input Material. |
| GG040 | GG | Data Completeness | Annual CO2 process emissions from Waelz Kiln or Electrothermic furnace. This data element is required. |
| GG041 | GG | Screen Error | Annual CO2 process emissions from Waelz Kiln or Electrothermic furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| GG043 | GG | Screen Error | Enter Own result for Annual CO2 process emissions from Waelz Kiln or Electrothermic furnace. This data element is required if you select Enter/Report Alternate Result. |
| GG050 | GG | Screen Error | Input Material. This data element is required and must be either \'Zinc-bearing material\', \'Flux material\', or \'Carbonaceous materials\'. |
| GG051 | GG | Screen Error | Input Material. This data element is required and must be either \'Zinc-bearing material\', \'Flux material\', \'Carbon electrode\' or \'Carbonaceous materials\'. |
| GG052 | GG | Screen Error | Number of months missing data procedures were followed to determine the monthly mass of the material. You must enter a value that is greater than or equal to zero and less than or equal to twelve. You must correct the current value before continuing. |
| GG053 | GG | Screen Error | Number of months missing data procedures were followed to repeat the test to determine the carbon content. You must enter a value that is greater than or equal to zero and less than or equal to twelve. You must correct the current value before continuing. |
| GG054 | GG | Data Completeness | Procedure used to develop substitute data for the monthly mass of the carbon containing input material. This data element is required. |
| GG055 | GG | Data Completeness | Test method used for the carbon content analysis. This data element is required. |
| GG056 | GG | Data Completeness | Number of months missing data procedures were followed to determine the monthly mass of the material. This data element is required. |
| GG057 | GG | Data Completeness | Number of months missing data procedures were followed to repeat the test to determine the carbon content. This data element is required. |
| GG100 | GG | Data Completeness | Zinc products produced. At least one row must be checked. |
| GG101 | GG | Data Completeness | Annual Production of the Product. This data element for row(s) [{1}] is required when its row is checked. |
| GG102 | GG | Data Completeness | Annual Production of the Product. This data element is required when its row is checked. |
| GG103 | GG | Data Completeness | Annual Production of the Product. This data element is required when its row is checked. |
| GG104 | GG | Data Completeness | Annual Production of the Product. This data element is required when its row is checked. |
| GG105 | GG | Data Completeness | Annual Production of the Product. This data element is required when its row is checked. |
| GG301 | GG | Screen Error | You need to save a Unit before you can add an Carbon-Containing Input Material. |
| GG302 | GG | Screen Error | You have added a process (kiln / furnace) line, but have not yet added an Input Material. Please use the Add an Input Material link to add at least one input for this process line, or click CANCEL. |
| IVT-GG001 | GG | Screen Error | Annual mass for zinc-bearing material is required. Please enter the required data or click CANCEL. |
| IVT-GG002 | GG | Screen Error | Carbon content for zinc-bearing material is required. Please enter the required data or click CANCEL. |
| IVT-GG003 | GG | Screen Error | Annual mass for zinc-bearing material. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-GG005 | GG | Screen Error | Carbon content for zinc-bearing material. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-GG006 | GG | Screen Error | Carbon content for zinc-bearing material. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-GG009 | GG | Screen Error | Annual mass for flux material is required. Please enter the required data or click CANCEL. |
| IVT-GG010 | GG | Screen Error | Carbon content for flux material is required. Please enter the required data or click CANCEL. |
| IVT-GG011 | GG | Screen Error | Annual mass for flux material. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-GG013 | GG | Screen Error | Carbon content for flux material. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-GG014 | GG | Screen Error | Carbon content for flux material. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-GG017 | GG | Screen Error | Annual mass for carbon electrode is required. Please enter the required data or click CANCEL. |
| IVT-GG018 | GG | Screen Error | Carbon content for carbon electrode is required. Please enter the required data or click CANCEL. |
| IVT-GG019 | GG | Screen Error | Annual mass for carbon electrode. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-GG021 | GG | Screen Error | Carbon content for carbon electrode. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-GG022 | GG | Screen Error | Carbon content for carbon electrode. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-GG025 | GG | Screen Error | Annual mass for carbonaceous materials is required. Please enter the required data or click CANCEL. |
| IVT-GG026 | GG | Screen Error | Carbon content for carbonaceous materials is required. Please enter the required data or click CANCEL. |
| IVT-GG027 | GG | Screen Error | Annual mass for carbonaceous materials. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-GG029 | GG | Screen Error | Carbon content for carbonaceous materials. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-GG030 | GG | Screen Error | Carbon content for carbonaceous materials. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-GG033 | GG | Data Completeness | You have not yet added any equation inputs data for zinc-bearing material. Please use the Inputs Verifier Tool to enter equation inputs for zinc-bearing material and calculate a result for this kiln or furnace. |
| IVT-GG034 | GG | Data Completeness | You have not yet added any equation inputs data for flux material. Please use the Inputs Verifier Tool to enter equation inputs for flux material and calculate a result for this kiln or furnace. |
| IVT-GG035 | GG | Data Completeness | You have not yet added any equation inputs data for carbon electrode. Please use the Inputs Verifier Tool to enter equation inputs for carbon electrode and calculate a result for this furnace. |
| IVT-GG036 | GG | Data Completeness | You have not yet added any equation inputs data for carbonaceous materials. Please use the Inputs Verifier Tool to enter equation inputs for carbonaceous materials and calculate a result for this kiln or furnace. |
| IVT-GG037 | GG | Screen Error | Enter Own result for Annual CO2 process emissions from Waelz Kiln or Electrothermic furnace. This data element is required if you select Enter/Report Alternate Result. |
Overview
Content Tools
ThemeBuilder
Tasks