Introduction
Please see Reporting Form Instructions on downloading the blank reporting form and uploading the completed reporting form.
The introductory block on the Subpart FF reporting form includes:
- Worksheet instructions as follows: It is intended for the user to complete all the sheets in this workbook, as applicable. If certain sheets are not applicable, for example if a facility has no degasification wells, then the user should not complete those sheets. Calculation support is provided for Equations FF-2, FF-4, FF-6, and FF-7 in this workbook on the emissions summary (Tab 10). Calculation support for other equations is not provided because not all equation inputs are collected.
- Reporting Form Version Number
- External links to help content and guidance on EPA's web page and at www.ccdsupport.com
- Workbook navigation links which allow you to quickly move to each page within the workbook.
The Table 1a, general information includes:
- Facility Name is an optional field
- GHGRP ID is required. (the GHGRP ID on the reporting form must match the facility ID in e-GGRT)
- Reporting Year is required. (while this defaults to a blank it must a reporting year must be selected. e-GGRT will check to ensure that the reporting year indicated is consistent with the year for which that form is submitted.) Note: Many date validations use the reporting year to establish allowable ranges, so the reporting year should be selected before you move to other tabs within the workbook.
- Comments (optional)
Table 1b includes:
- Quarter (column not editable)
- Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring) (these data are created and edited on Tab 10 and copied to this summary page)
- Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring)
Overview
Content Tools
ThemeBuilder
Tasks