...
Q588. Are flare emissions included in the 98.2(a)(3)(iii)
...
combined
...
emissions
...
from
...
all
...
stationary
...
fuel
...
combustion
...
sources
...
when
...
determining
...
applicability
...
for
...
Subpart W
...
per
...
§98.231(a)?
...
However, for the 2011 reporting year onwards, you must include flare stack emissions in the applicability determination, as flares are included under subpart W.A588. To determine facility applicability, you must determine if you meet the requirements of §98.2(a)(1), (a)(2) or (a)(3). Based on the information provided EPA assumes you meet the definition of the source category for subpart W and are only subject to reporting for subparts C and W.However, for the 2011 reporting year onwards, you must include flare stack emissions in the applicability determination, as flares are included under subpart W.
| Wiki Markup |
|---|
{show-to:group=confluence-Users}{center}{_}Footer / References Bar which is Visible to the public{_}{center}{show-to} |
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
Updated on
|
| Wiki Markup |
|---|
{show-to:group=confluence-Users}
{info}
Source: EPA, Frequently Asked Questions, Petroleum and Natural Gas Systems, July 2011, [http://www.epa.gov/climatechangeghgreporting/documents/emissionspdf/downloads112011/documents/Subpart-W-additional-faq.pdf]. Modified per M. Eaddy, 7/26/2012
Approval / Publishing History: Version 2
Expiration : none
Relevant Subpart: W, Flaring
{info}{center}{_}History Panel For Internal Use - Not Visible to the Public{_}{center}{show-to} |
Overview
Content Tools
ThemeBuilder
Tasks