longname |
---|
Q743. My site has a gas collection system that did not operate at all during the reporting year, but did operate in prior reporting years. Which equations should I use to calculate my methane generation and GHG emissions for the current reporting year?
|
A743. If the gas collection system was operational in prior reporting years and may be operational again in future reporting years, you should still indicate that your facility has a gas collection system and calculate and report the results of equations HH-1, HH-4, HH-5, and HH-6. Equation HH-4 should yield a value of 0 for R since the volume of recovered gas is 0. In equation HH-6, the value of GCH4 will equal the modeled methane generation rate in the reporting year calculated using equation HH-1; values of DE and fDEST should be reported as 0. Equation HH-6 will be equivalent to the value of equation HH-5. No values should be reported for equations HH-7 and HH-8 because it is not possible to calculate values for these equations if the gas collection system did not operate at all during the reporting year (i.e., R=0). Finally, the value of equation HH-6 must be reported as the total subpart HH emission amount for your facility.
Wiki Markup |
---|
{show-to:group=confluence-Users}{center}{_}Footer / References Bar which is Visible to the public{_}{center}{show-to} |
Panel |
---|
Updated on Page info |
---|
| modified-date |
---|
| modified-date |
---|
dateformat | dd/MM/YY HH:mm |
---|
|
|
Wiki Markup |
---|
{show-to:group=confluence-Users}
{info}
Source: R. Schmeltz, 2/11/2013
Approval / Publishing History: Version 1
Expiration: none
Relevant Subparts: Subpart HH
{info}{center}{_}History Panel For Internal Use - Not Visible to the Public{_}{center}{show-to} |