For each applicable subpart from the list below, users must report their facility’s GHG data using an Excel-based Reporting Form which may be downloaded as described below. The Reporting Forms are meant to provide reporters with a simple and straightforward means for reporting required data and information for the subparts listed below:

• Subpart E - Adipic Acid Production
• Subpart F - Aluminum Production
• Subpart I - Electronics Manufacturing
• Subpart O - HCFC-22 Production and HFC-23 Destruction
• Subpart R - Lead Production
• Subpart S - Lime Manufacturing (CEMS users only)
• Subpart U - Miscellaneous Uses of Carbonate
• Subpart V - Nitric Acid Production
• Subpart W - Petroleum and Natural Gas Systems
• Subpart Z - Phosphoric Acid Production
• Subpart BB - Silicon Carbide Production
• Subpart CC - Soda Ash Manufacturing
• Subpart DD - Use of Electric Transmission and Distribution Equipment
• Subpart EE - Titanium Dioxide Production
• Subpart FF - Underground Coal Mines
• Subpart GG - Zinc Production
• Subpart II - Industrial Wastewater Treatment
• Subpart LL - Supplies of Coal-based Liquid Fuels
• Subpart MM - Suppliers of Petroleum Products
• Subpart QQ - Importers and Exporters of Fluorinated Greenhouse Gases Contained in Pre-Charged Equipment or Closed-Cell Foams
• Subpart OO - Suppliers of Industrial Greenhouse Gases
• Subpart SS - Manufacture of Electric Transmission and Distribution Equipment

Step 1. Download a Reporting Form

To download the reporting form(s) for a subpart:

1. Find the subpart in the table below
2. Click the linked filename(s) in the second column
3. Save the file(s) to your computer in a location of your choosing
4. If your facility uses CEMS to calculate emissions under this subpart, you must also download a separate CEMS Reporting Form by clicking the CEMS Reporting Form.xls link at the bottom of the table
5. Repeat 1-4 for each applicable subpart (note that multiple Reporting Forms may be required for Subparts O and OO)

...

Important Information about Reporting Forms

...

Step 2. Enter data into the reporting form

Once all applicable Reporting Forms have been saved to your computer, open each file, and enter the required information according to the general guidance provided below and the instructions provided within each Reporting Form. Always remember to save each completed Reporting Form when finished.

...

• Do Not Skip Rows in reporting form tables.

...

•          Do not save files as .XLSM (macro enabled excel) files. Some users may be presented

...

• warnings that Visual Basic code may be deleted if the file is not saved as a .XLSM. Please ignore these warning and save

...

• with an .XLS or .XLSX extension. EPA does not include VBA or excel macros in its reporting forms.
•          Please use caution if you must Cut and Paste from other sources. EPA urges users who cut and paste to always use Paste Special / Values or as text when pasting. Failure to cut and paste as directed may damage your reporting form, forcing you to start again with an empty form. Use of the Paste Special / Values will ensure that formatting and cell protection is not altered. If you use cut and paste processes and later encounter problems with your reporting form please contact the GHGRP Help Desk
•          Use the correct version of the reporting form. In some cases, reporting forms change from year to year.  The table below shows the years that a particular form can be used.  If the table below does not include the subpart and/or year of interest, see the Prior Year Reporting Forms page. 

Download Reporting Forms

Anchor
Using Reporting Forms Using Reporting Forms

Step 1. Download a Reporting Form

To download the reporting form(s) for a subpart:

1. Find the subpart in the table below
2. Click the linked filename(s) in the second column
3. Save the file(s) to your computer in a location of your choosing
4. If your facility uses CEMS to calculate emissions under Subparts R, Z, BB, CC, EE, or GG, you must also download a separate CEMS Reporting Form by clicking the CEMS Reporting Form.xls link at the bottom of the table

Repeat 1-4 for each applicable subpart (note that multiple Reporting Forms may be required for Subparts W and OO)

Step 2. Enter data into the reporting form

Once all applicable Reporting Forms have been saved to your computer, open each file, and enter the required information according to the general guidance provided below and the instructions provided within each Reporting Form. Always remember to save each completed Reporting Form when finished.

Step 3. Submit Completed Reporting Forms to e-GGRT

...

Some e-GGRT reporting form upload pages also require you to enter GHG emissions data for a subpart. Please ensure that you provide all of the requested data for each applicable subpart.

...

...

{

:

id

=

PNG1

} Click image this link to expand Image Removed

Image Added

{cloak:id=PNG1|=none|cloak.toggle.zone=true}

Cloak
Wiki Markup
cloak.toggle.zone true id PNG1	cloak.toggle.type

Panel
Image Removed

Wiki Markup
{cloak}

none

Once finished uploading and entering data on the subpart summary page, click SAVE.

Validation Report

Excerpt Include
Subpart Validation Report Subpart Validation Report nopanel true

...

See Also

Screen Errors
Subpart Validation Report