Greenhouse Gas Reporting Help

Critical Validation Checks for Subpart II

Created by Sokha Chea on Feb 13, 2020

Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.

CODE	SUBPART	TYPE	MESSAGE_TEXT
II0001	II	Screen Error	GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility.
II0001A	II	Data Completeness	You have not uploaded a reporting form file.
II0001B	II	Data Completeness	You must upload a file containing a narrative description and/or diagram of each wastewater treatment system. The filename of each file uploaded must be reported on the Introduction sheet of the Subpart II Reporting Form.
II0002	II	Screen Error	Reporting Period. This data element is required and must be equal to the expected reporting year.
II0003	II	Data Completeness	Anaerobic Process. This data element is required.
II0004	II	Data Completeness	Unique Identifier. This data element is required.
II0005	II	Data Completeness	Indicate what diagram or document uploaded to e-GGRT (per number 2 above) pertains to this process. This data element is required.
II0006	II	Data Completeness	If you identified an anaerobic lagoon, what is the average depth of the lagoon (meters)? This data element is required.
II0009	II	Data Completeness	Is biogas that\'s generated in the process recovered? This data element is required.
II0010	II	Data Completeness	Does CH4 destruction occur at the facility, off-site, or both? This data element is required.
II0011	II	Data Completeness	Anaerobic Process. This data element is required and must be the same across all tabs.
II0012	II	Data Completeness	Unique Identifier. This data element is required and must be the same across all tabs.
II0016	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0020	II	Data Completeness	Anaerobic Process. This data element is required.
II0021	II	Data Completeness	Unique Identifier. This data element is required.
II0022	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0023	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0024	II	Data Completeness	Provide the number of weeks substitute data were used to determine the volumetric biogas flow for each week that biogas was collected for destruction. This data element is required.
II0026	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0027	II	Data Completeness	Provide the number of weeks substitute data were used to determine the weekly average CH4 concentration for each week that biogas was collected for destruction. This data element is required.
II0029	II	Data Completeness	Enter the annual CH4 emissions for this process. This data element is required.
II0031	II	Data Completeness	Anaerobic Process. This data element is required
II0032	II	Data Completeness	Unique Identifier. This data element is required
II0033	II	Data Completeness	Week. This data element is required
II0035	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0037	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0039	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0040	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0042	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0043	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0045	II	Data Completeness	Is the moisture content for the biogas incorporated into the monitoring equipment internal calculations? This data element is required.
II0046	II	Data Completeness	If the answer to item 7 is no, indicate whether the biogas flow is measured on a wet or dry basis. This data element is required.
II0047	II	Data Completeness	If the answer to item 7 is no, indicate whether the CH4 concentration in the biogas flow is measured on a wet or dry basis. This data element is required.
II0048	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0050	II	Data Completeness	Anaerobic Process. This data element is required.
II0051	II	Data Completeness	Unique Identifier. This data element is required.
II0052	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0053	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0054	II	Data Completeness	Is the moisture content for the biogas incorporated into the monitoring equipment internal calculations? This data element is required.
II0055	II	Data Completeness	If the answer to item 3 is no, indicate whether the biogas flow is measured on a wet or dry basis. This data element is required.
II0056	II	Data Completeness	If the answer to item 3 is no, indicate whether the CH4 concentration in the biogas flow is measured on a wet or dry basis. This data element is required.
II0057	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0060	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0062	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0064	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0066	II	Data Completeness	If CH4 destruction occurs on-site or both, indicate whether a back-up destruction device is present at the facility. This data element is required.
II0067	II	Data Completeness	If CH4 destruction occurs on-site or both, indicate the annual operating hours for the primary destruction device. This data element is required.
II0069	II	Data Completeness	If CH4 destruction occurs on-site or both, indicate the annual operating hours for the back-up destruction device. This data element is required.
II0071	II	Data Completeness	Primary destruction device CH4 destruction efficiency. This data element is required.
II0073	II	Data Completeness	Secondary destruction device CH4 destruction efficiency. This data element is required.
II0075	II	Data Completeness	Annual mass CH4 generated from the anaerobic wastewater treatment process. This data element is required.
II0079	II	Data Completeness	Annual quantity of CH4 recovered from the anaerobic reactor, sludge digester, or lagoon. This data element is required
II0081	II	Data Completeness	Annual quantity of CH4 recovered from the anaerobic reactor, sludge digester, or lagoon (metric tons CH4/yr). This data element is required.
II0084	II	Data Completeness	Anaerobic Process. This data element is required.
II0085	II	Data Completeness	Unique Identifier. This data element is required.
II0086	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0088	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0089	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0090	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0092	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0093	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0094	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0095	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0096	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0097	II	Data Completeness	Anaerobic Process. This data element is required.
II0098	II	Data Completeness	Unique Identifier. This data element is required.
II0101	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0104	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0105	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0106	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0107	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0108	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0109	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0111	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0112	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0113	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0114	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0115	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0116	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0117	II	Data Completeness	Anaerobic Process. This data element is required.
II0118	II	Data Completeness	Unique Identifier. This data element is required.
II0121	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0124	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0125	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0126	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0127	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0128	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0129	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0131	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0132	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0133	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0134	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0135	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0136	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0137	II	Data Completeness	Anaerobic Process. This data element is required.
II0138	II	Data Completeness	Unique Identifier. This data element is required.
II0141	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0144	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0145	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0146	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0147	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0148	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0149	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0151	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0152	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0153	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0154	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0155	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0156	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0157	II	Data Completeness	Anaerobic Process. This data element is required.
II0158	II	Data Completeness	Unique Identifier. This data element is required.
II0161	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0164	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0165	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0166	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0167	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0168	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0169	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0171	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0172	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0173	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0174	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0175	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0176	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0177	II	Data Completeness	Anaerobic Process. This data element is required.
II0178	II	Data Completeness	Unique Identifier. This data element is required.
II0181	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0184	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0185	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0186	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0187	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0188	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0189	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0191	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0192	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0193	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0194	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0195	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0196	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0197	II	Data Completeness	Anaerobic Process. This data element is required.
II0198	II	Data Completeness	Unique Identifier. This data element is required.
II0201	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0204	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0205	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0206	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0207	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0208	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0209	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0211	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0212	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0213	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0214	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0215	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0216	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0217	II	Data Completeness	Anaerobic Process. This data element is required.
II0218	II	Data Completeness	Unique Identifier. This data element is required.
II0221	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0224	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0225	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0226	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0227	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0228	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0229	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0231	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0232	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0233	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0234	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0235	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0236	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0237	II	Data Completeness	Anaerobic Process. This data element is required.
II0238	II	Data Completeness	Unique Identifier. This data element is required.
II0241	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0244	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0245	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0246	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0247	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0248	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0249	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0251	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0252	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0253	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0254	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0255	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0256	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0257	II	Data Completeness	Anaerobic Process. This data element is required.
II0258	II	Data Completeness	Unique Identifier. This data element is required.
II0261	II	Data Completeness	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required.
II0264	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average COD or BOD5 concentration. This data element is required.
II0265	II	Data Completeness	Weekly volume of wastewater entering the anaerobic treatment process for each week. This data element is required.
II0266	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly volume of wastewater. This data element is required.
II0267	II	Data Completeness	Confirm the CH4 production potential (Bo). This data element is required.
II0268	II	Data Completeness	What Bo value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0269	II	Data Completeness	CH4 production potential (Bo). This data element is required.
II0271	II	Data Completeness	Confirm the Methane Conversion Factor Value (MCF). This data element is required.
II0272	II	Data Completeness	What MCF value do you want to report to EPA? (Calculated result initially selected by default). This data element Is required.
II0273	II	Data Completeness	Methane Conversion Factor Value (MCF). This data element is required.
II0274	II	Data Completeness	Methane Conversion Factor Value (MCF). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is.
II0275	II	Data Completeness	If COD is measured, apply Equation II-1. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0276	II	Data Completeness	If BOD is measured, apply Equation II-2. CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0277	II	Data Completeness	CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0278	II	Data Completeness	What result do you want to report to EPA? (Calculated result initially selected by default). This data element is required.
II0279	II	Data Completeness	CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0280	II	Data Completeness	CH4Gn = Annual mass CH4 generated from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0284	II	Data Completeness	Unique Identifier. This data element is required.
II0285	II	Data Completeness	Anaerobic Process. This data element is required.
II0286	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0289	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0291	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0292	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0294	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0295	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0296	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0298	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0299	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0301	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0302	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0304	II	Data Completeness	Unique Identifier. This data element is required.
II0305	II	Data Completeness	Anaerobic Process. This data element is required.
II0306	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0309	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0311	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0312	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0314	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0315	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0316	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0318	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0319	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0321	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0322	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0324	II	Data Completeness	Unique Identifier. This data element is required.
II0325	II	Data Completeness	Anaerobic Process. This data element is required.
II0326	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0329	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0331	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0332	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0334	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0335	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0336	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0338	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0339	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0341	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0342	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0344	II	Data Completeness	Unique Identifier. This data element is required.
II0345	II	Data Completeness	Anaerobic Process. This data element is required.
II0346	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0349	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0351	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0352	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0354	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0355	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0356	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0358	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0359	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0361	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0362	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0364	II	Data Completeness	Unique Identifier. This data element is required.
II0365	II	Data Completeness	Anaerobic Process. This data element is required.
II0366	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0369	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0371	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0372	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0374	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0375	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0376	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0378	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0379	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0381	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0382	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0384	II	Data Completeness	Unique Identifier. This data element is required.
II0385	II	Data Completeness	Anaerobic Process. This data element is required.
II0386	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0389	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0391	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0392	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0394	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0395	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0396	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0398	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0399	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0401	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0402	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0404	II	Data Completeness	Unique Identifier. This data element is required.
II0405	II	Data Completeness	Anaerobic Process. This data element is required.
II0406	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0409	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0411	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0412	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0414	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0415	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0416	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0418	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0419	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0421	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0422	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0424	II	Data Completeness	Unique Identifier. This data element is required.
II0425	II	Data Completeness	Anaerobic Process. This data element is required.
II0426	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0429	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0431	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0432	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0434	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0435	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0436	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0438	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0439	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0441	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0442	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0444	II	Data Completeness	Unique Identifier. This data element is required.
II0445	II	Data Completeness	Anaerobic Process. This data element is required.
II0446	II	Data Completeness	Does the facility conduct weekly monitoring of the CH4 concentration in the biogas collected for destruction in the anaerobic process? This data element is required.
II0449	II	Data Completeness	For continuous monitoring, weekly volumetric biogas flow for each week that biogas is collected for destruction (acf). This data element is required
II0451	II	Data Completeness	Indicate if a missing data procedure was used to determine the volumetric biogas flow for a week that biogas was collected for destruction. This data element is required.
II0452	II	Data Completeness	For continuous monitoring, weekly average CH4 concentration for each week that biogas is collected for destruction (%). This data element is required.
II0454	II	Data Completeness	Indicate if a missing data procedure was used to determine the weekly average CH4 concentration for a week that biogas was collected for destruction. This data element is required.
II0455	II	Data Completeness	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required.
II0456	II	Data Completeness	If biogas temperature is not incorporated into the monitoring equipment, provide the weekly average biogas temperature for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0458	II	Data Completeness	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required.
II0459	II	Data Completeness	If biogas pressure is not incorporated into the monitoring equipment, provide the weekly average biogas pressure for each week at which flow is measured for biogas collected for destruction. This data element is required.
II0461	II	Data Completeness	Select "Yes" if both of the following statements are true: 1) The weekly average moisture content is not incorporated into the monitoring equipment internal calculations 2) The weekly average moisture content of the biogas flow and CH4 concentration are not measured on the same basis (i.e., one is measured wet, the other dry). Select "No" if either of the statements are false. This data element is required.
II0462	II	Data Completeness	If moisture content for the biogas is not incorporated into the monitoring equipment and is not consistently measured on a wet or dry basis for both biogas flow and CH4 concentration, provide the weekly average moisture content of the biogas flow for each week at which flow is measured for biogas collected for destruction (cubic feet water per cubic feet biogas). This data element is required.
II0464	II	Data Completeness	What result do you want to report to EPA? (Calculated result initially selected by default). This data element is required.
II0465	II	Data Completeness	Annual quantity of CH4 recovered from the anaerobic reactor, sludge digester, or lagoon (metric tons CH4/yr). This data element is required.
II0467	II	Data Completeness	CH4En = Annual mass CH4 emissions from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0468	II	Data Completeness	What result do you want to report to EPA? (Calculated result initially selected by default). This data element is required.
II0469	II	Data Completeness	CH4En = Annual mass CH4 emissions from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0471	II	Data Completeness	CH4En = Annual mass CH4 emissions from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0473	II	Data Completeness	Unique Identifier. This data element is required.
II0474	II	Data Completeness	Anaerobic Process. This data element is required.
II0475	II	Data Completeness	Annual quantity of CH4 recovered from the anaerobic reactor, sludge digester, or lagoon. This data element is required
II0476	II	Data Completeness	CE = CH4 collection efficiency of anaerobic process, as specified in Table II-2 (decimal). This data element is required.
II0477	II	Data Completeness	CH4Ln = Leakage at the anaerobic process (metric tons CH4). This data element is required.
II0478	II	Data Completeness	fDEST_1 = Fraction of hours the primary destruction device was operating (device operating hours/annual operating hours of the biogas recovery system). If biogas is transported off-site for destruction, use fDEST_1 = 1. This data element is required.
II0480	II	Data Completeness	fDEST_2 = Fraction of hours the primary destruction device was operating (device operating hours/annual operating hours of the biogas recovery system). If biogas is transported off-site for destruction, use fDEST_2 = 1. This data element is required.
II0482	II	Data Completeness	CH4En = Annual mass CH4 emissions from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0483	II	Data Completeness	What result do you want to report to EPA? (Calculated result initially selected by default). This data element is required.
II0484	II	Data Completeness	CH4En = Annual mass CH4 emissions from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0486	II	Data Completeness	CH4En = Annual mass CH4 emissions from the anaerobic wastewater treatment process (metric tons CH4). This data element is required.
II0488	II	Data Completeness	Facility Name. This data element is required.
II0489	II	Data Completeness	CH4ET = Annual mass CH4 emitted from all anaerobic processes at the facility (metric tons). This data element is required.
II0501	II	Data Completeness	You have selected Subpart II for reporting, but you have not yet added an anaerobic process.
II0502	II	Screen Error	Name or ID. This data element is required. Please enter the required data or click CANCEL.
II0503	II	Screen Error	Anaerobic Process. This data element is required. Please enter the required data or click CANCEL.
II0504	II	Screen Error	Is biogas generated in the process recovered? This data element is required. Please enter the required data or click CANCEL.
II0505	II	Screen Error	Number of weeks that the system was operational. This data element is required. Please enter the required data or click CANCEL.
II0506	II	Screen Error	Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required. Please enter the required data or click CANCEL.
II0507	II	Screen Error	How does the facility monitor the CH4 concentration in the biogas collected for destruction? This data element is required. Please enter the required data or click CANCEL.
II0508	II	Screen Error	Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL.
II0509	II	Screen Error	Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL.
II0510	II	Screen Error	Is the biogas moisture content incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL.
II0511	II	Screen Error	Does CH4 destruction occur at the facility, off-site, or both? This data element is required. Please enter the required data or click CANCEL.
II0512	II	Screen Error	Was biogas flow measured on a wet or dry basis? This data element is required. Please enter the required data or click CANCEL.
II0513	II	Screen Error	Was biogas CH4 concentration measured on a wet or dry basis? This data element is required. Please enter the required data or click CANCEL.
II0514	II	Equation Completeness	Flow for week(s) [{1}]. This data element is required.
II0515	II	Equation Completeness	COD for week(s) [{1}]. This data element is required.
II0516	II	Equation Completeness	B0 for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported.
II0517	II	Equation Completeness	MCF for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported.
II0518	II	Screen Error	Report this value for CH4Gn. This data element is required.
II0519	II	Screen Error	Report this value for CH4Gn. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing.
II0520	II	Screen Error	Report which CH4Gn result? This data element is required.
II0521	II	Equation Completeness	Flow for week(s) [{1}]. This data element is required.
II0522	II	Equation Completeness	BOD for week(s) [{1}]. This data element is required.
II0523	II	Equation Completeness	B0 for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported.
II0524	II	Equation Completeness	MCF for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported.
II0525	II	Screen Error	Report this value for CH4Gn. This data element is required.
II0526	II	Screen Error	Report this value for CH4Gn. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing.
II0527	II	Screen Error	Report which CH4Gn result? This data element is required.
II0528	II	Screen Error	Report this value for CH4En. This data element is required.
II0529	II	Screen Error	Report this value for CH4En. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing.
II0530	II	Screen Error	Report which CH4En result? This data element is required.
II0531	II	Data Completeness	Volumetric Biogas Flow for week(s) [{1}]. This data element is required.
II0532	II	Data Completeness	Biogas CH4 Concentration for week(s) [{1}]. This data element is required.
II0533	II	Data Completeness	Biogas Temperature for week(s) [{1}]. This data element is required.
II0534	II	Data Completeness	Biogas Pressure for week(s) [{1}]. This data element is required.
II0535	II	Data Completeness	Biogas Moisture for week(s) [{1}]. This data element is required.
II0536	II	Screen Error	Annual quantity of CH4 recovered from the process. This data element is required.
II0537	II	Screen Error	Annual quantity of CH4 recovered from the process. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing.
II0538	II	Equation Completeness	Annual operating hours for the primary destruction device. This data element is required.
II0539	II	Screen Error	Annual operating hours for the primary destruction device. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing.
II0540	II	Equation Completeness	Destruction efficiency for the primary destruction device. This data element is required.
II0541	II	Screen Error	Destruction efficiency for the primary destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing.
II0542	II	Equation Completeness	Is a back-up destruction device present at the facility? This data element is required.
II0543	II	Equation Completeness	Annual operating hours for the back-up destruction device. This data element is required if you indicate that a back-up destruction device is present.
II0544	II	Screen Error	Annual operating hours for the back-up destruction device. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing.
II0545	II	Equation Completeness	Destruction efficiency for the back-up destruction device. This data element is required if you indicate that a back-up destruction device is present.
II0546	II	Screen Error	Destruction efficiency for the back-up destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing.
II0547	II	Screen Error	Report this value for CH4En. This data element is required.
II0548	II	Screen Error	Report this value for CH4En. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing.
II0549	II	Screen Error	Report which CH4En result? This data element is required.
II0550	II	Data Completeness	Average depth of the lagoon. This data element is required.
II0551	II	Data Completeness	Document or diagram that pertains to this process. This data element is required.
II0552	II	Screen Error	Number of weeks that the system was operational. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing.
II0562	II	Screen Error	Annual operating hours for the primary destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing.
II0563	II	Screen Error	Annual operating hours for the back-up destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing.
II0571	II	Equation Completeness	CH4 collection efficiency (based on cover type). This data element is required.
II0575	II	Screen Error	Report which annual quantity of CH4 recovered result? This data element is required.
II0576	II	Screen Error	Biogas CH4 Concentration for week(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing.
II0577	II	Screen Error	Biogas Moisture for week(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing.
II0600	II	Data Completeness	You have selected Subpart II for reporting, but you have not yet uploaded a file containing a narrative description and/or diagram of a wastewater treatment system.
II5007	II	Screen Error	Does the facility use a wet milling or dry milling process? This data element is required if the facility performs an ethanol production processing operation. Please make a selection or click CANCEL. If the facility does not perform an ethanol production processing operation, select the last option.

Back