Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| CODE | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| CEMSML-1 | H | Data Completeness | Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). |
| CEMSML-2 | H | Data Completeness | CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. |
| CML-001 | H | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-002 | H | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-007 | H | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-007X | H | Screen Error | Total carbon dioxide (CO2) emissions measured by the CEMS (or applicable Part 75 methodology). This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-012 | H | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. |
| CML-013 | H | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-014 | H | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-016 | H | Screen Error | Carbon dioxide emissions in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-018 | H | Screen Error | Carbon dioxide emissions in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-020 | H | Screen Error | Carbon dioxide emissions in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-022 | H | Screen Error | Carbon dioxide emissions in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-027a | H | Data Completeness | Fraction of nitrous oxide emissions from CML. This data element is required. |
| CML-034 | H | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-035 | H | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-036 | H | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-037 | H | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-038 | H | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-039 | H | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-040 | H | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-041 | H | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-043 | H | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. |
| CML-046 | H | Data Completeness | CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. |
| CML-047a | H | Data Completeness | Fraction of methane emissions from CML. This data element is required. |
| CML-051 | H | Data Completeness | Total Non-biogenic carbon dioxide emissions. This data element is required. |
| CML-052 | H | Data Completeness | Total Biogenic carbon dioxide emissions. This data element is required. |
| CML-053 | H | Data Completeness | Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-054 | H | Data Completeness | Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-055 | H | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-056 | H | Screen Error | Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-057 | H | Data Completeness | Total number of source operating hours in the reporting year. This data element is required. |
| CML-058 | H | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. |
| CML-059 | H | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is less than the End Date. |
| CML-060 | H | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-061 | H | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-062 | H | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-063 | H | Data Completeness | Carbon dioxide emissions measured in Quarter 1. This data element is required. |
| CML-064 | H | Screen Error | Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-065 | H | Data Completeness | Carbon dioxide emissions measured in Quarter 2. This data element is required. |
| CML-066 | H | Screen Error | Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-067 | H | Data Completeness | Carbon dioxide emissions measured in Quarter 3. This data element is required. |
| CML-068 | H | Screen Error | Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-069 | H | Data Completeness | Carbon dioxide emissions measured in Quarter 4. This data element is required. |
| CML-070 | H | Screen Error | Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-071 | H | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-072 | H | Data Completeness | Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-073 | H | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-074 | H | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-075 | H | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-076 | H | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-077 | H | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-078 | H | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-082 | H | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-083 | H | Screen Error | Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. |
| CML-086 | H | Screen Error | The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-087 | H | Screen Error | The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-088 | H | Screen Error | The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| CML-089 | H | Screen Error | The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| H001 | H | Data Completeness | Annual carbon dioxide process emissions from cement production. This data element is required. If your facility only has kilns monitored by CEMS, please enter zero. |
| H002 | H | Screen Error | Annual carbon dioxide process emissions from cement production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| H004 | H | Screen Error | Please make a selection or click CANCEL. |
| H005 | H | Screen Error | Please make a selection or click CANCEL. |
| H006 | H | Data Completeness | Annual cement production for the facility. This data element is required. |
| H007 | H | Screen Error | Annual cement production for the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| H009 | H | Screen Error | Raw material name or description. This data element is required. Please enter the required data or click CANCEL. |
| H010 | H | Data Completeness | Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. This data element is required. |
| H011 | H | Screen Error | Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. The value must be a number between 0 through 12 months. The value you provided is outside that range. You must correct the current value before continuing. |
| H012 | H | Data Completeness | Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This data element is required. |
| H013 | H | Screen Error | Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| H013a | H | Screen Error | Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This value must be either zero or 1. The value you provided is outside that range. You must correct the current value before continuing. |
| H014 | H | Data Completeness | Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. This data element is required. |
| H015 | H | Screen Error | Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. The value must be a number between 0 through 12 months. The value you provided is outside that range. You must correct the current value before continuing. |
| H016 | H | Data Completeness | Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This data element is required. |
| H017 | H | Screen Error | Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| H017a | H | Screen Error | Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This value must be either zero or 1. The value you provided is outside that range. You must correct the current value before continuing. |
| H018 | H | Data Completeness | Because you have elected to estimate carbon dioxide emissions from raw material consumption based on consumption of individual materials, you must identify each raw material consumed in the kiln. You have not identified any raw materials consumed in this kiln. |
| H019 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in the first quarter. This data element is required. |
| H020 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in the first quarter. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H021 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in the second quarter. This data element is required. |
| H022 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in the second quarter. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H023 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in the third quarter. This data element is required. |
| H024 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in the third quarter. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H025 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in the fourth quarter. This data element is required. |
| H026 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in the fourth quarter. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H027 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in the first quarter. This data element is required. |
| H028 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in the first quarter. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H029 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in the second quarter. This data element is required. |
| H030 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in the second quarter. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H031 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in the third quarter. This data element is required. |
| H032 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in the third quarter. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H033 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in the fourth quarter. This data element is required. |
| H034 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in the fourth quarter. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H035 | H | Data Completeness | Method used to determine clinker production for January. This data element is required. |
| H036 | H | Data Completeness | Method used to determine clinker production for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H037 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for January. This data element is required. |
| H038 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for January. This data element is required. |
| H039 | H | Data Completeness | Method used to determine clinker production for February. This data element is required. |
| H040 | H | Data Completeness | Method used to determine clinker production for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H041 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for February. This data element is required. |
| H042 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for February. This data element is required. |
| H043 | H | Data Completeness | Method used to determine clinker production for March. This data element is required. |
| H044 | H | Data Completeness | Method used to determine clinker production for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H045 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for March. This data element is required. |
| H046 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for March. This data element is required. |
| H047 | H | Data Completeness | Method used to determine clinker production for April. This data element is required. |
| H048 | H | Data Completeness | Method used to determine clinker production for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H049 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for April. This data element is required. |
| H050 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for April. This data element is required. |
| H051 | H | Data Completeness | Method used to determine clinker production for May. This data element is required. |
| H052 | H | Data Completeness | Method used to determine clinker production for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H053 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for May. This data element is required. |
| H054 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for May. This data element is required. |
| H055 | H | Data Completeness | Method used to determine clinker production for June. This data element is required. |
| H056 | H | Data Completeness | Method used to determine clinker production for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H057 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for June. This data element is required. |
| H058 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for June. This data element is required. |
| H059 | H | Data Completeness | Method used to determine clinker production for July. This data element is required. |
| H060 | H | Data Completeness | Method used to determine clinker production for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H061 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for July. This data element is required. |
| H062 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for July. This data element is required. |
| H063 | H | Data Completeness | Method used to determine clinker production for August. This data element is required. |
| H064 | H | Data Completeness | Method used to determine clinker production for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H065 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for August. This data element is required. |
| H066 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for August. This data element is required. |
| H067 | H | Data Completeness | Method used to determine clinker production for September. This data element is required. |
| H068 | H | Data Completeness | Method used to determine clinker production for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H069 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for September. This data element is required. |
| H070 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for September. This data element is required. |
| H071 | H | Data Completeness | Method used to determine clinker production for October. This data element is required. |
| H072 | H | Data Completeness | Method used to determine clinker production for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H073 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for October. This data element is required. |
| H074 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for October. This data element is required. |
| H075 | H | Data Completeness | Method used to determine clinker production for November. This data element is required. |
| H076 | H | Data Completeness | Method used to determine clinker production for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H077 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for November. This data element is required. |
| H078 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for November. This data element is required. |
| H079 | H | Data Completeness | Method used to determine clinker production for December. This data element is required. |
| H080 | H | Data Completeness | Method used to determine clinker production for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H081 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in clinker for December. This data element is required. |
| H082 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in clinker for December. This data element is required. |
| H083 | H | Data Completeness | Number of kilns. This data element is required. |
| H084 | H | Screen Error | Number of kilns. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| H086 | H | Data Completeness | Number of operating kilns. This data element is required. |
| H087 | H | Screen Error | Number of operating kilns. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| H088a | H | Data Quality | Number of operating kilns. The number of operating kilns should be equal to or less than the total number of kilns. Please double check this value and revise. |
| H089 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in [{1}]. This data element is required. |
| H090 | H | Data Completeness | Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in [{1}]. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H091 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in [{1}]. This data element is required. |
| H092 | H | Data Completeness | Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in [{1}]. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| H200 | H | Data Completeness | Clinker Production used for January. This data element is required. |
| H202 | H | Data Completeness | Clinker Production used for February. This data element is required. |
| H204 | H | Data Completeness | Clinker Production used for March. This data element is required. |
| H206 | H | Data Completeness | Clinker Production used for April. This data element is required. |
| H208 | H | Data Completeness | Clinker Production used for May. This data element is required. |
| H210 | H | Data Completeness | Clinker Production used for June. This data element is required. |
| H212 | H | Data Completeness | Clinker Production used for July. This data element is required. |
| H214 | H | Data Completeness | Clinker Production used for August. This data element is required. |
| H216 | H | Data Completeness | Clinker Production used for September. This data element is required. |
| H218 | H | Data Completeness | Clinker Production used for October. This data element is required. |
| H220 | H | Data Completeness | Clinker Production used for November. This data element is required. |
| H222 | H | Data Completeness | Clinker Production used for December. This data element is required. |
| H250 | H | Data Completeness | You have selected Subpart H for reporting, but you have not yet added a kiln. |
| H260 | H | Data Completeness | Because you have indicated "Kiln specific feed-to-clinker ratio" as the method used to determine one or more month\'s clinker production, you should indicate that monthly kiln-specific clinker factors were used to determine monthly clinker product by selecting the check box at the top of Monthly Information page. |
| H261 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for January. |
| H262 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for February. |
| H263 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for March. |
| H264 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for April. |
| H265 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for May. |
| H266 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for June. |
| H267 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for July. |
| H268 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for August. |
| H269 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for September. |
| H270 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for October. |
| H271 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for November. |
| H272 | H | Data Completeness | Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for December. |
| H273 | H | Screen Error | Amount of annual clinker production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| H274 | H | Data Completeness | Amount of annual clinker production. This data element is required. |
| H276 | H | Screen Error | Annual average clinker CO2 emission factor for the facility, averaged across all kilns. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| H277 | H | Data Completeness | Annual average clinker CO2 emission factor for the facility, averaged across all kilns. This data element is required. |
| H279 | H | Screen Error | Annual average cement kiln dust (CKD) CO2 emissions factor for the facility, averaged across all kilns. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| H280 | H | Data Completeness | Annual average cement kiln dust (CKD) CO2 emissions factor for the facility, averaged across all kilns. This data element is required. |
| H282 | H | Screen Error | Kiln-specific CKD CO2 emission factor for Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| H283 | H | Screen Error | Kiln-specific CKD CO2 emission factor for Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| H284 | H | Screen Error | Kiln-specific CKD CO2 emission factor for Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| H285 | H | Screen Error | Kiln-specific CKD CO2 emission factor for Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| H286 | H | Screen Error | Enter Own Result for Kiln-specific CKD CO2 emission factor for Quarter 1. This data element is required if you select Enter/Report Alternate Result. |
| H287 | H | Screen Error | Enter Own Result for Kiln-specific CKD CO2 emission factor for Quarter 2. This data element is required if you select Enter/Report Alternate Result. |
| H288 | H | Screen Error | Enter Own Result for Kiln-specific CKD CO2 emission factor for Quarter 3. This data element is required if you select Enter/Report Alternate Result. |
| H289 | H | Screen Error | Enter Own Result for Kiln-specific CKD CO2 emission factor for Quarter 4. This data element is required if you select Enter/Report Alternate Result. |
| H294 | H | Screen Error | Enter Own Result for Annual CO2 process emissions from cement manufacturing. This data element is required if you select Enter/Report Alternate Result. |
| H295 | H | Screen Error | Enter Own Result for Kiln-specific CKD CO2 emission factor for [{1}]. This data element is required if you select Enter/Report Alternate Result. |
| IVT-H001 | H | Data Completeness | You have not yet added any monthly equation inputs data for the Total annual emissions of CO2 from clinker production from kiln. Please use the Inputs Verifier Tool to enter equation inputs for this kiln and calculate a result for this Cement Production facility. |
| IVT-H002 | H | Screen Error | Monthly total CaO content of clinker for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H003 | H | Screen Error | Monthly total CaO content of clinker for {1}. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H006 | H | Screen Error | Monthly non-calcined CaO content of clinker for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H007 | H | Screen Error | Monthly non-calcined CaO content of clinker for {1}. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H010 | H | Screen Error | Monthly total MgO content of clinker for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H011 | H | Screen Error | Monthly total MgO content of clinker for {1}. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H013 | H | Screen Error | Monthly non-calcined MgO content of clinker for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H014 | H | Screen Error | Monthly non-calcined MgO content of clinker for {1}. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H016 | H | Screen Error | Identify if clinker is measured directly, or is calculated from raw feed for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H017 | H | Screen Error | Quantity of raw kiln feed in {1} from kiln. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H018 | H | Screen Error | Quantity of raw kiln feed in {1} from kiln. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-H019 | H | Screen Error | Kiln-specific factor for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H020 | H | Screen Error | Kiln-specific factor for {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-H021 | H | Screen Error | Quantity of clinker produced in {1} from kiln. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H022 | H | Screen Error | Quantity of clinker produced in {1} from kiln. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-H027 | H | Data Completeness | You have not yet added any quarterly equation inputs data for the Total annual emissions of CO2 from clinker production from kiln. Please use the Inputs Verifier Tool to enter equation inputs for this kiln and calculate a result for this Cement Production facility. |
| IVT-H028 | H | Screen Error | Quarterly total CaO content of CKD not recycled to the kiln, for quarter(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H029 | H | Screen Error | Quarterly total CaO content of CKD not recycled to the kiln, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H032 | H | Screen Error | Quarterly non-calcined CaO content of CKD not recycled to the kiln, for quarter(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H033 | H | Screen Error | Quarterly non-calcined CaO content of CKD not recycled to the kiln, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H036 | H | Screen Error | Quarterly total MgO content of CKD not recycled to the kiln, for quarter(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H037 | H | Screen Error | Quarterly total MgO content of CKD not recycled to the kiln, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H039 | H | Screen Error | Quarterly non-calcined MgO content of CKD not recycled to the kiln, for quarter(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H040 | H | Screen Error | Quarterly non-calcined MgO content of CKD not recycled to the kiln, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H042 | H | Screen Error | Cement kiln dust (CKD) not recycled to the kiln, in quarter(s) [{1}] from kiln. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H043 | H | Screen Error | Cement kiln dust (CKD) not recycled to the kiln, in quarter(s) [{1}] from kiln. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-H046 | H | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from raw materials. Please use the Inputs Verifier Tool to enter equation inputs for this kiln and calculate a result for this Cement Production facility. |
| IVT-H047 | H | Screen Error | The amount of raw material consumed annually. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H048 | H | Screen Error | The amount of raw material consumed annually. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-H049 | H | Screen Error | Organic carbon content of combined raw kiln feed, as determined in §98.84(c). This data element is required. Please enter the required data or click CANCEL. |
| IVT-H050 | H | Screen Error | Organic carbon content of combined raw kiln feed, as determined in §98.84(c). You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H051 | H | Screen Error | The amount of raw material consumed annually. This data element is required. Please enter the required data or click CANCEL. |
| IVT-H052 | H | Screen Error | The amount of raw material consumed annually. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-H053 | H | Screen Error | Organic carbon content of raw material, as determined in §98.84(c). This data element is required. Please enter the required data or click CANCEL. |
| IVT-H054 | H | Screen Error | Organic carbon content of raw material, as determined in §98.84(c). You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-H060 | H | Screen Error | Monthly total CaO content of clinker is less than monthly non-calcined CaO content of clinker for {1}. |
| IVT-H061 | H | Screen Error | Monthly total MgO content of clinker is less than monthly non-calcined MgO content of clinker for {1}. |
| IVT-H062 | H | Screen Error | Quarterly total CaO content of CKD not recycled to the kiln is less than quarterly non-calcined CaO content of CKD not recycled to the kiln, for quarter(s) [{1}]. |
| IVT-H063 | H | Screen Error | Quarterly total MgO content of CKD not recycled to the kiln is less than quarterly non-calcined MgO content of CKD not recycled to the kiln, for quarter(s) [{1}]. |
Overview
Content Tools
ThemeBuilder
Tasks