Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| CODE | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| CC006 | CC | Data Completeness | Total number of soda ash process lines not monitored by CEMS. This data element is required. |
| CC007 | CC | Screen Error | Total number of soda ash process lines not monitored by CEMS. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC008 | CC | Data Completeness | You have added Subpart CC, but have not yet added a line. |
| CC009 | CC | Screen Error | Is this manufacturing line\'s emissions monitored using a CEMS?. This data element is required. Please enter the required data or click CANCEL. |
| CC011 | CC | Screen Error | Calculation method used to estimate CO2 process emissions. This data element is required. |
| CC013 | CC | Data Completeness | Annual production of soda ash. This data element is required. |
| CC014 | CC | Screen Error | Annual production of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC016 | CC | Data Completeness | Annual production capacity of soda ash. This data element is required. |
| CC017 | CC | Screen Error | Annual production capacity of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC019 | CC | Data Completeness | Annual CO2 process emissions for the manufacturing line. This data element is required. |
| CC020 | CC | Screen Error | Annual CO2 emissions for the manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC021 | CC | Data Completeness | The number of months that missing data procedures were followed to determine the process vent flow rate from mine water stripper/evaporator. This data element is required. |
| CC022 | CC | Screen Error | Total number of soda ash manufacturing lines not monitored by CEMS. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC025 | CC | Screen Error | The number of times that missing data procedures were followed to repeat test to determine the stack gas volumetric flow during the performance test. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC027 | CC | Screen Error | The number of times that missing data procedures were followed to repeat test to determine the hourly CO2 concentration. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC029 | CC | Screen Error | The number of times that missing data procedures were followed to repeat test to determine the average process vent flow rate during the performance test. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC030 | CC | Data Completeness | Annual CO2 process emissions for the manufacturing line. This data element is required. |
| CC031 | CC | Screen Error | Annual CO2 emissions for the manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC032 | CC | Data Completeness | The number of months that missing data procedures were followed to determine the monthly mass of soda ash. This data element is required. |
| CC035 | CC | Data Completeness | The number of weeks that missing data procedures were followed to determine the inorganic carbon content of soda ash. This data element is required. |
| CC036 | CC | Screen Error | The number of weeks that missing data procedures were followed to determine the inorganic carbon content of soda ash. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing. |
| CC038 | CC | Data Completeness | Annual CO2 process emissions for the manufacturing line. This data element is required. |
| CC039 | CC | Screen Error | Annual CO2 emissions for the manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC040 | CC | Data Completeness | The number of months that missing data procedures were followed to determine the monthly mass of trona. This data element is required. |
| CC043 | CC | Data Completeness | The number of weeks that missing data procedures were followed to determine the inorganic carbon content of trona. This data element is required. |
| CC044 | CC | Screen Error | The number of weeks that missing data procedures were followed to determine the inorganic carbon content of trona. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing. |
| CC047 | CC | Data Completeness | Annual consumption of trona for each manufacturing line. This data element is required. |
| CC048 | CC | Screen Error | Annual consumption of trona for each manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC050 | CC | Data Completeness | Annual consumption of liquid alkaline for each manufacturing line. This data element is required. |
| CC051 | CC | Screen Error | Annual consumption of liquid alkaline for each manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC053 | CC | Data Completeness | Annual production of soda ash. This data element is required. |
| CC054 | CC | Screen Error | Annual production of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC056 | CC | Data Completeness | Annual production capacity of soda ash. This data element is required. |
| CC057 | CC | Screen Error | Annual production capacity of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC059 | CC | Data Completeness | The annual process vent flow rate from the mine water stripper/evaporator. This data element is required. |
| CC060 | CC | Screen Error | The annual process vent flow rate from the mine water stripper/evaporator. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC061 | CC | Data Completeness | The average process vent flow rate from the mine water stripper/evaporator. This data element is required. |
| CC062 | CC | Screen Error | The average process vent flow rate from the mine water stripper/evaporator. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC063 | CC | Data Completeness | The hourly CO2 concentration during the performance test. This data element is required. |
| CC064 | CC | Screen Error | The hourly CO2 concentration during the performance test. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| CC065 | CC | Data Completeness | The stack gas volumetric flow rate during the performance test. This data element is required. |
| CC066 | CC | Screen Error | The stack gas volumetric flow rate during the performance test. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC067 | CC | Data Completeness | The CO2 emission factor of process vent flow from mine water. This data element is required. |
| CC068 | CC | Screen Error | The CO2 emission factor of process vent flow from mine water. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC069 | CC | Data Completeness | The CO2 emission mass emission rate during the performance test. This data element is required. |
| CC070 | CC | Screen Error | The CO2 emission mass emission rate during the performance test. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CC123 | CC | Data Completeness | You have added Subpart CC, but have not yet added a manufacturing line. |
| CEMSML-1 | CC | Data Completeness | Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). |
| CEMSML-2 | CC | Data Completeness | CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. |
| CML-001 | CC | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-002 | CC | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-007 | CC | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-007X | CC | Screen Error | Total carbon dioxide (CO2) emissions measured by the CEMS (or applicable Part 75 methodology). This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-012 | CC | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. |
| CML-013 | CC | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-014 | CC | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-016 | CC | Screen Error | Carbon dioxide emissions in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-018 | CC | Screen Error | Carbon dioxide emissions in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-020 | CC | Screen Error | Carbon dioxide emissions in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-022 | CC | Screen Error | Carbon dioxide emissions in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-027a | CC | Data Completeness | Fraction of nitrous oxide emissions from CML. This data element is required. |
| CML-034 | CC | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-035 | CC | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-036 | CC | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-037 | CC | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-038 | CC | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-039 | CC | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-040 | CC | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-041 | CC | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-043 | CC | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. |
| CML-046 | CC | Data Completeness | CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. |
| CML-047a | CC | Data Completeness | Fraction of methane emissions from CML. This data element is required. |
| CML-051 | CC | Data Completeness | Total Non-biogenic carbon dioxide emissions. This data element is required. |
| CML-052 | CC | Data Completeness | Total Biogenic carbon dioxide emissions. This data element is required. |
| CML-053 | CC | Data Completeness | Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-054 | CC | Data Completeness | Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-055 | CC | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-056 | CC | Screen Error | Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-057 | CC | Data Completeness | Total number of source operating hours in the reporting year. This data element is required. |
| CML-058 | CC | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. |
| CML-059 | CC | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is less than the End Date. |
| CML-060 | CC | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-061 | CC | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-062 | CC | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-063 | CC | Data Completeness | Carbon dioxide emissions measured in Quarter 1. This data element is required. |
| CML-064 | CC | Screen Error | Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-065 | CC | Data Completeness | Carbon dioxide emissions measured in Quarter 2. This data element is required. |
| CML-066 | CC | Screen Error | Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-067 | CC | Data Completeness | Carbon dioxide emissions measured in Quarter 3. This data element is required. |
| CML-068 | CC | Screen Error | Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-069 | CC | Data Completeness | Carbon dioxide emissions measured in Quarter 4. This data element is required. |
| CML-070 | CC | Screen Error | Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-071 | CC | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-072 | CC | Data Completeness | Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-073 | CC | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-074 | CC | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-075 | CC | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-076 | CC | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-077 | CC | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-078 | CC | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-082 | CC | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-083 | CC | Screen Error | Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. |
| CML-086 | CC | Screen Error | The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-087 | CC | Screen Error | The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-088 | CC | Screen Error | The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| CML-089 | CC | Screen Error | The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| IVT-CC001 | CC | Screen Error | Inorganic carbon content in trona input, from the carbon analysis for month [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-CC002 | CC | Screen Error | Inorganic carbon content in trona input, from the carbon analysis for month [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-CC005 | CC | Screen Error | Mass of trona input in month [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-CC006 | CC | Screen Error | Mass of trona input in month [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-CC008 | CC | Screen Error | Inorganic carbon content in soda ash output, from the carbon analysis for month [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-CC009 | CC | Screen Error | Inorganic carbon content in soda ash output, from the carbon analysis for month [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-CC012 | CC | Screen Error | Mass of soda ash output in month [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-CC013 | CC | Screen Error | Mass of soda ash output in month [{1}]. You must enter a value that is greater than or equal to zero. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-CC015 | CC | Screen Error | Enter Own Result for Result (ECO2). This data element is required if you select Enter/Report Alternate Result. |
| IVT-CC016 | CC | Screen Error | Enter Own Result for Result (ECO2). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-CC018 | CC | Screen Error | Enter Own Result for Result (ECO2). This data element is required if you select Enter/Report Alternate Result. |
| IVT-CC019 | CC | Screen Error | Enter Own Result for Result (ECO2). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-CC100 | CC | Data Completeness | You have not yet added any equation inputs data for the annual CO2 process emissions for this manufacturing line. Please use the Inputs Verifier Tool to enter equation inputs for this manufacturing line and calculate a result for this manufacturing line. |
| IVT-CC101 | CC | Data Completeness | You have not yet added any equation inputs data for the annual CO2 process emissions for this manufacturing line. Please use the Inputs Verifier Tool to enter equation inputs for this manufacturing line and calculate a result for this manufacturing line. |
Overview
Content Tools
ThemeBuilder
Tasks