This page provides step-by-step instructions to enter Subpart S summary and emissions information about your facility.
Adding or Updating Summary Facility and Emissions Information
To add or update Subpart S summary information for your facility, locate the SUBPART S SUMMARY INFORMATION FOR THIS FACILITY table on the Subpart S Overview page, and click OPEN.
Click image to expand
Subpart S requires you to report the following data about your facility: For assistance in calculating CO2 process emissions from all kilns, msut download calculation spreadsheets for this subpart by clicking the link located below the red emissions data entry box titled "Use Subpart S equation spreadsheets to calculate," then following the provided instructions. When you have completed the spreadsheets, they must be saved and uploaded to Cal e-GGRT using the BROWSE and UPLOAD buttons. Subpart S also requires you to report the following:
When you have entered the required information, click SAVE
If you don't have all the data, you can enter some now, save it, and finish it later
After you save the data on this page, the next time you open the page, the calculator on the top of the page will display the CO2 process emissions for your facility, rounded to the nearest metric ton. The value displayed is for informational purposes only.
Click image to expand
See Also
Screen Errors
Using Cal e-GGRT to Prepare Your Subpart S Report
Subpart S Lime Product Information
Subpart S Calcined-lime Byproduct or Waste Information
Subpart Validation Report