Certain validation checks which are considered to represent critical errors must be corrected before you can successfully upload your XML-based submission. These checks are reported to the XML reporter immediately upon attempted upload and signified with a stop sign
in your validation report.  The table below provides a list of critical errors along with additional information that will help you diagnose and correct your XML package. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, please submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
Subpart Error Code Validation Message Provided by e-GGRT Xpath Data Element Name Additional Instructions for Resolving A A001 Do reported emissions include emissions from a cogeneration unit. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ CogenerationUnitEmissionsIndicator cogenUnitEmissions Be sure to include the required <CogenerationUnitEmissionsIndicator>value (allowed values are only Y, N, NA) A A002 NAICS code. This data element is required. naicsCode A A003 NAICS code. This data element must have 6 digits. naicsCode A A005 Parent company name. This data element is required. corporateFacilityName A A006 Percentage of ownership interest. This data element is required. ownerPercentage A A007 Street address. This data element is required. streetAddressLine1 A A008 City. This data element is required. city A A009 State. This data element is required. state A A010 ZIP code. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetail /ParentCompanyDetails/ParentCompany/Zip zip Be sure to include the missing zip code for the <Zip> element A A011 Percentage of ownership interest. The value entered must be between 0 and 100. ownerPercentage A A012 ZIP code. The zip code must be in the format xxxxx, xxxxx-xxxx, or xxxxxxxxx. zip A A013 The selected GHG report start date is after the selected GHG report end date. ghgReportStartDate A A014 Explanation of any calculation methodology changes during the reporting year must be 4,000 characters or less. calcMethodChangeDesc A A016 Percentage of ownership interest. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. ownerPercentage A A017 Street address. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. streetAddressLine1 A A018 City. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. city A A019 State. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. state A A020 ZIP code. This data element should not be reported if US GOVERNMENT is specified as the Parent company name. zip A A023 Code\'s relevance to revenue producing activity. This data element is required. type A A067 Use of Subpart L BAMM (Best Available Monitoring Methods) was permitted ONLY in Reporting Year 2012. Please remove these data elements before submitting your report. FacilitySiteInformation/SubpartBAMMDetails/ SubpartName subpartName Within the <SubpartBAMMDetails> node do not include a set of data introduced by <SubpartName>L</SubpartName> A A080 Parent Company Name. This data element cannot have periods. corporateFacilityName A A081 Parent Company Name. You must use "&" instead of "and". corporateFacilityName A A082 Parent Company Name. You must use "NORTH AMERICA" instead of "NA". corporateFacilityName A A083 Parent Company Name. You must use "CORP" instead of "Corporation". corporateFacilityName A A084 Parent Company Name. You must use "ASSOC" instead of "Association". corporateFacilityName A A085 Parent Company Name. You must use "CO" instead of "Company". corporateFacilityName A A086 Parent Company Name. You must use "DIV" instead of "Division". corporateFacilityName A A087 Parent Company Name. You must use "INC" instead of "Incorp". corporateFacilityName A A088 Parent Company Name. You must use "INC" instead of "Incorporated". corporateFacilityName A A089 Parent Company Name. You must use "LP" instead of "Limited Partnership". corporateFacilityName A A090 Parent Company Name. You must use "LTD" instead of "Limited". corporateFacilityName A A091 Parent Company Name. You must use "LLC" instead of "Limited Liability Company". corporateFacilityName A A092 Parent Company Name. You must use "PTNR" instead of "Partnership". corporateFacilityName A A093 Parent Company Name. You must use "USA" instead of "United States of America". corporateFacilityName A A094 Parent Company Name. You must use "US" instead of "United States". corporateFacilityName A A095 Please provide only one facility in your uploaded XML file. faccount A A096 The FacilitySiteIdentifier node was empty. Please change your XML file, add a FacilitySiteIdentifier (Facility Id), and upload your file again. facid A A097 The GHGRP ID %gid_str within the uploaded XML file does not match the GHGRP ID of the facility you currently have selected. facid A A098 The Reporting Year %ry_str within the uploaded XML file does not match the Reporting Year of the facility you currently have selected. ryid A A100 Subpart OO cannot contain any Carbon Dioxide emission values. subparts A A101 The "CalculationMethodologyChangesDescription" element should be less than 4000 characters. calcDesc A A107 The GHG reporting start date entered for your annual report is invalid (does not fall within the calendar year of your annual report). Please double check your report and revise, if necessary. If you believe it to be correct, please submit the report as is. transientData['startYear'] A A108 The date entered for the end of the reporting period is invalid because it does not fall within the calendar year of your annual report. Please correct the date. transientData['endYear'] A A111 Total supplier CO2e emissions greater than zero were reported but the report does not contain any of the supplier subparts LL through QQ. Please address this critical error. Then you can return here to perform another final review and submit your report. data[supplierAnnualCO2E] A A112 Total facility biogenic CO2 emissions have not been reported but the report contains at least one subpart from Subpart C through II, SS, or TT. Based on the information available to us, it appears that this data element is required per 98.3(c)(4)(ii). Please address this critical error. Then you can return here to perform another final review and submit your report. data[facilityAnnualBiogenicCO2] A A113 Total facility CO2e emissions greater than zero were reported, but the report contains no direct emitter subparts C-II, RR-UU (i.e., non-supplier subparts). Please address this critical error. Then you can return here to perform another final review and submit your report. data[facilityAnnualCO2E] A A114 Total facility CO2e emissions have not been reported, but the report contains at least one subpart from Subpart C through II, SS, or TT. Based on the information available to us, it appears that this data element is required per 98.3(c)(4)(i). Please address this critical error. Then you can return here to perform another final review and submit your report. data[facilityAnnualCO2E] A A116 The reported value for the CO2 equivalent emissions from facility subparts C-II, SS, and TT ({1} metric tons) is larger than expected. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[facilityAnnualCO2E] A A117 The reported value for the biogenic CO2 emissions from facility subparts C-II, SS, and TT ({1} metric tons) is larger than expected. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[facilityAnnualBiogenicCO2] A A118 The reported value for the CO2 equivalent emissions from supplier subparts LL-QQ ({1} metric tons) is either larger than expected or smaller than expected. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[supplierAnnualCO2E] A A120 You have attached a file named ({1}) for subparts ({2}). All files attached for submission should have unique names. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[filesWithSameName] A A121 You have attached a file named ({1}) for subpart ({2}). All files attached for submission should have unique names. Please address this critical error. Then you can return here to perform another final review and submit your report. If you believe you have received this message in error, please contact the GHGRP help desk at GHGreporting@epa.gov. data[duplicateFileName] A A500 NAICS code: Please enter a primary NAICS code for the facility. This data element is required. GHG/FacilitySiteInformation/ FacilitySiteDetails/ PrimaryNAICSCode naicsCode Be sure to include <PrimaryNAICSCode> value A A501a NAICS code was not found in the list of 2017 NAICS codes. naicsCode A A501b NAICS code was not found in the list of 2022 NAICS codes. naicsCode A A502 The NAICS code entered has already been selected for this facility. naicsCode A A503 You have already entered a code for the primary NAICS code. Only one code can be designated as the "Primary" NAICS code. Please select either "Second Primary" NAICS code or "Additional" NAICS code. naicsCode A A504 You have already entered a code for the second primary NAICS code. Only one code can be designated as the "Second Primary" NAICS code. Please select either "Primary" NAICS code or "Additional" NAICS code. naicsCode A A505 Please select a primary NAICS code before selecting a second primary NAICS code. naicsCode A A506 Please select a primary NAICS code before selecting an additional NAICS code. naicsCode A A510 Parent Company Name(s). Please enter the name(s) of the highest-level United States parent company/companies or other entity (e.g., partnership, city government) that owned this facility or supplier on December 31 of the current reporting year. If the facility or supplier is federally owned, enter "US GOVERNMENT." /GHG/FacilitySiteInformation/ FacilitySiteDetails/ParentCompanyDetails none Be sure to include the omitted <ParentCompanyDetails> element value A A511 You have not yet selected any subparts for reporting. Return to the Facility or Supplier Overview page and use the ADD or REMOVE Subparts link to select the applicable subpart(s) for your facility or supplier. GHG/FacilitySiteInformation/ FacilitySiteDetails/ SubPartInformation none You must the include the node associated with listed Xpath and at least one subpart node withing this parent A A511a You have not selected any subparts for reporting. none A ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] A ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] AA AA001 Annual steam purchases. This data element is required. You may enter zero if your mill does not purchase steam. annualSteamPurchases AA AA002 Annual steam purchases. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualSteamPurchases AA AA004 Annual production of unbleached virgin chemical pulp. This data element is required. You may enter zero only if no virgin chemical pulp was produced and you are reporting zero emissions under subpart AA. annualPulpProd AA AA005 Annual production of pulp products. You must enter a value for the annual production of pulp products that is greater than or equal to zero. You may enter zero only if no virgin chemical pulp was produced and you are reporting zero emissions under subpart AA. annualPulpProd AA AA010 Please make a selection or click CANCEL. hasCEMS AA AA020 Basis for annual mass of spent liquor solids. This data element is required. basis AA AA030 Basis for annual mass of spent liquor solids. This data element is required. basis AA AA034 You have selected Subpart AA for reporting, but you have not yet added a unit or furnace. groupUnit AA AA035 You have selected Subpart AA for reporting, but you have not yet added makeup chemical use. You may enter zero for makeup chemical use if your mill does not use calcium carbonate or sodium carbonate as makeup chemicals. unitTypeName AA AA036 You have not added a fuel for this Chemical Recovery Furnace. fuelAssociationId AA AA037 You have not added a fuel for this Chemical Recovery Combustion Unit. fuelAssociationId AA AA038 You have not added a fuel for this Pulp Mill Lime Kiln. fuelAssociationId AA AA040 Please select a calculation methodology (i.e., tier) or click CANCEL. calculationMethodology AA AA041 You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate AA AA042 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate AA AA043 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate AA AA044 Please select a fuel or click CANCEL. fuelName AA AA060 Frequency of higher heating value determinations. This data element is required. frequencyHHVDeterminations AA AA061 Frequency of higher heating value determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of higher heating value determinations in the text box provided. This data element is required. otherFrequencyHHVDeterminations AA AA062 Total number of valid carbon content determinations. This data element is required. numberOfCCs AA AA063 Total number of valid carbon content determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfCCs AA AA065 Total number of carbon content substitute data values. This data element is required. numberOfSubstituteCCs AA AA066 Total number of carbon content substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteCCs AA AA068 Frequency of carbon content determinations. This data element is required. frequencyCCDeterminations AA AA069 Frequency of carbon content determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of carbon content determinations in the text box provided. This data element is required. otherFrequencyCCDeterminations AA AA070 Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This data element is required. operatingHoursMissingFuelUsage AA AA071 Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. operatingHoursMissingFuelUsage AA AA073 Total number of valid carbon content determinations. This data element is required. numberOfCCs AA AA074 Total number of valid carbon content determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfCCs AA AA076 Total number of carbon content substitute data values. This data element is required. numberOfSubstituteCCs AA AA077 Total number of carbon content substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteCCs AA AA079 Frequency of carbon content determinations. This data element is required. frequencyCCDeterminations AA AA080 Frequency of carbon content determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of carbon content determinations in the text box provided. This data element is required. otherFrequencyCCDeterminations AA AA081 Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This data element is required. operatingHoursMissingFuelUsage AA AA082 Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. operatingHoursMissingFuelUsage AA AA084 Total number of valid molecular weight determinations. This data element is required. numberOfValidMWDeterminations AA AA085 Total number of valid molecular weight determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfValidMWDeterminations AA AA087 Total number of molecular weight substitute data values. This data element is required. numberOfSubstituteMWs AA AA088 Total number of molecular weight substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteMWs AA AA090 Frequency of molecular weight determinations. This data element is required. frequencyMWDeterminations AA AA091 Frequency of molecular weight determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of molecular weight determinations in the text box provided. This data element is required. otherFrequencyMWDeterminations AA AA161 Fuel name. You must enter a fuel name to proceed further. fuelName AA AA162 Fuel type. You must make a selection for a fuel type to proceed further. fuelType AA AA163 Molar Volume Constant (MVC) used. This data element is required. mvc AA AA500 Emissions associated with spent pulping liquor combustion were reported but the annual quantity of pulp products reported was zero. It appears that a positive quantity of annual pulp products should have been reported. Please address this critical error. Then you can return here to perform another final review and submit your report. data[annualPulpProductsProduced] AA AA501 The annual quantity of calcium oxide produced in the lime kiln [{1}] was reported as zero but emissions were reported for the kiln indicating that it produced calcium oxide during the reporting year. Please address this critical error. Then you can return here to perform another final review and submit your report. data[caOQuantityProduced] AA AA519 The annual N2O emissions of {1} (metric tons) Subpart AA does not equal the sum of the annual N2O emissions of {2} (metric tons) from all units at the facility. Please address this critical error. Then you can return here to perform another final review and submit your report. data[subpartAAAnnualN2O] AA CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML AA CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits AA CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml AA IVT-C854 You have reported all zeros or a combination of non-zero and zero values for equation inputs for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted or enter non-zero values for all equation inputs. You must correct this before continuing or click Cancel. monthApplicable AA IVT-C855 You have reported a zero for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted. You must correct this before continuing or click Cancel. monthApplicable AA UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName AA UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType BB BB008 You have not uploaded a reporting form file. jctSubPartFacility BB BB009 Annual production of silicon carbide. This data element is required. annualProductionofSiliconCarbide BB BB010 Annual production of silicon carbide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. annualProductionofSiliconCarbide BB BB013 Annual production capacity of silicon carbide. This data element is required. annualProductionCapacityofSiliconCarbide BB BB014 Annual production capacity of silicon carbide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. annualProductionCapacityofSiliconCarbide BB BB017 Annual consumption of petroleum coke. This data element is required. annualConsumptionofPetroleumCoke BB BB018 Annual consumption of petroleum coke. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. annualConsumptionofPetroleumCoke BB BB019 Indicator of whether the carbon content of petroleum coke is based on reports from the supplier or through self measurement using applicable ASTM standard method. This data element is required. basisforCarbonContentofPetCoke BB BB020 Measured carbon content of petroleum coke as determined for QA/QC of supplier data. This data is required. measuredQAQCCarbonContentofPetCoke BB BB021 Measured carbon content of petroleum coke as determined for QA/QC of supplier data. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing or click CANCEL. measuredQAQCCarbonContentofPetCoke BB BB023 Number of months that missing data procedures were followed to determine the carbon content of petroleum coke. This data element is required. numberofMonthsofCarbonContent BB BB024 Number of months that missing data procedures were followed to determine the carbon content of petroleum coke. You must enter a value that is greater than or equal to zero and less than or equal to 12. You must correct the current value before continuing or click CANCEL. numberofMonthsofCarbonContent BB BB025 Number of months that missing data procedures were followed to determine the monthly petroleum coke consumption. This data element is required. numberofMonthsofPetCokeConsumption BB BB026 Number of months that missing data procedures were followed to determine the monthly petroleum coke consumption. You must enter a value that is greater than or equal to zero and less than or equal to 12. You must correct the current value before continuing or click CANCEL. numberofMonthsofPetCokeConsumption BB BB027 Annual nitrous oxide mass emissions. This data element is required. officialUnroundedN2o BB BB028 Annual nitrous oxide mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. officialUnroundedN2o BB BB029 Annual methane mass emissions. This data element is required. officialUnroundedCh4 BB BB030 Annual methane mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing or click CANCEL. officialUnroundedCh4 BB BB100 You have not selected the Subpart BB calculation methodology for your facility. isCems BB CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML BB CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits BB CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml BB CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions BB CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs BB CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt BB CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow BB CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture BB CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow BB CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits BB CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions BB CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission BB CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission BB CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission BB CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission BB CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> BB CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 BB CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs BB CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt BB CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate BB CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate BB CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType BB CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate BB CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] BB CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] BB CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] BB CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] BB CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] BB CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] BB CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] BB CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] BB CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName BB CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted BB CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission BB CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission BB CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted BB CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions BB CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate BB CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate BB CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate BB CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate C ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] C ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] C C-EF-1 You have not yet added a fuel for this configuration. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/ TierFuelDetails/FuelType> nofuels Each unit must include at least one <FuelType> C C-EU-1 You have selected Subpart C for reporting, but you have not yet added a configuration. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/UnitIdentification/UnitName nounits Subpart C must include at least one <UnitsCDetails> node with a <UnitName> C C002 The maximum rated heat input capacity of an individual unit, or the highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. This data element is required. ratedHeatInputCapacity C C003 The maximum rated heat input capacity of an individual unit, or the highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedHeatInputCapacity C C0066 Carbon dioxide emissions measured by the CEMS (or applicable Part 75 methodology). This data element can not be smaller than the biogenic carbon dioxide mass emissions. officialUnroundedCEMSorPart75Co2 C C0076 Carbon dioxide emissions measured by the CEMS (or applicable Part 75 methodology). This data element can not be smaller than the biogenic carbon dioxide mass emissions. officialUnroundedCEMSorPart75Co2 C C0083 Total annual carbon dioxide mass emissions at the monitored location. This data element can not be smaller than the biogenic carbon dioxide mass emissions. officialUnroundedCEMSorPart75Co2 C C009 The combined maximum rated heat input capacity of the units sharing the common stack. This data element is required. ratedHeatInputCapacity C C010 The combined maximum rated heat input capacity of the units sharing the common stack. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedHeatInputCapacity C C011 Number of units sharing common stack or duct. This data element is required. numberOfUnits C C012 Number of units sharing common stack or duct. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfUnits C C013-1 You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate C C013-2 You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate C C014-1 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate C C014-2 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate C C015-1 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate C C015-2 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate C C016 Part 75 methodology. This data element is required. part75Methodology C C017 Part 75 heat input method. This data element is required. part75HeatInputMethod C C018 You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate C C019 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate C C020 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate C C021 The maximum rated heat input capacity of an individual unit, or the highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. This data element is required. ratedHeatInputCapacity C C022 The maximum rated heat input capacity of an individual unit, or the highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedHeatInputCapacity C C023 Group name/ID. This data element is required. groupUnitName C C024 This type of reporting configuration (common duct/stack) must have a group name/ID that begins with the prefix "CS-". groupUnitName C C025 Unit name/ID. This data element is required. groupUnitName C C026 Unit type. This data element is required. groupUnitType C C027 Group name/ID. This data element is required. groupUnitName C C028 This type of reporting configuration (aggregation of small units) must have a group name/ID that begins with the prefix "GP-". groupUnitName C C029 This type of reporting configuration (common supply pipe) must have a name/ID that begins with the prefix "CP-". groupUnitName C C030 Total number of source operating hours in the reporting year. This data element is required. sourceOpHours C C031 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. sourceOpHours C C033 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide concentration. This data element is required. operatingHoursCo2Concentration C C034 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursCo2Concentration C C036 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. operatingHoursGasFlowRate C C037 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursGasFlowRate C C039 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content (if moisture correction is required and a continuous moisture monitor is used). This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursMoisture C C041 Cumulative carbon dioxide emissions, Quarter 1. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/Tier4QuarterFuelDetails[1]/ CumulativeCO2MassEmissions emissionsMap['Quarter 1'] Within the <Tier4QuarterFuelDetails> node with a property of <QuarterName>First Quarter</QuarterName>must be included with a <CumulativeCO2MassEmissions> node with a non-null<CalculatedValue> C C042 Cumulative carbon dioxide emissions, Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emissionsMap['Quarter 1'] C C043 Cumulative carbon dioxide emissions, Quarter 2. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/Tier4QuarterFuelDetails[3]/ CumulativeCO2MassEmissions/CalculatedValue emissionsMap['Quarter 2'] Within the <Tier4QuarterFuelDetails> node with a property of <QuarterName>Second Quarter</QuarterName> must be included with a <CumulativeCO2MassEmissions> node with a non-null<CalculatedValue> C C044 Cumulative carbon dioxide emissions, Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emissionsMap['Quarter 2'] C C045 Cumulative carbon dioxide emissions, Quarter 3. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/Tier4QuarterFuelDetails[3]/ CumulativeCO2MassEmissions/CalculatedValue emissionsMap['Quarter 3'] Within the <Tier4QuarterFuelDetails> node with a property of <QuarterName>Third Quarter</QuarterName> must be included with a <CumulativeCO2MassEmissions> node with a non-null<CalculatedValue> C C046 Cumulative carbon dioxide emissions, Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emissionsMap['Quarter 3'] C C047 Cumulative carbon dioxide emissions, Quarter 4. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/Tier4QuarterFuelDetails[4]/ CumulativeCO2MassEmissions/CalculatedValue emissionsMap['Quarter 4'] Within the <Tier4QuarterFuelDetails> node with a property of <QuarterName>Fourth Quarter</QuarterName> must be included with a <CumulativeCO2MassEmissions> node with a non-null<CalculatedValue> C C048 Cumulative carbon dioxide emissions, Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emissionsMap['Quarter 4'] C C049 Annual volume of carbon dioxide emitted from the combustion of all fuels, Vtotal. Because you have indicated that biogenic carbon dioxide emissions were estimated using the methodology described by Equations C-12, C-13, and C-14, this data element is required. vtotal C C050 Annual volume of carbon dioxide emitted from the combustion of all fuels, Vtotal. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. vtotal C C051 Annual volume of carbon dioxide emitted from the combustion of all fossil fuels, Vff. Because you have indicated that biogenic carbon dioxide emissions were estimated using the methodology described by Equations C-12, C-13, and C-14, this data element is required. vff C C052 Annual volume of carbon dioxide emitted from the combustion of all fossil fuels, Vff. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. vff C C053 Annual volume of carbon dioxide emitted from the combustion of all biomass fuels, Vbio. Because you have indicated that biogenic carbon dioxide emissions were estimated using the methodology described by Equations C-12, C-13, and C-14, this data element is required. vbio C C054 Annual volume of carbon dioxide emitted from the combustion of all biomass fuels, Vbio. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. vbio C C057 Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation /SubPartC/UnitsCDetails/Tier4Details/CO2EmissionsNonBiogenic officialUnroundedBiogenicCo2 Within the <Tier4Details> node the <CumulativeCO2MassEmissions> node must be included with a non-null<CalculatedValue> C C058 Biogenic carbon dioxide mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedBiogenicCo2 C C060 Total annual non-biogenic CO2 emissions (includes fossil fuel, sorbent, and process carbon dioxide emissions). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/CO2EmissionsNonBiogenic officialUnroundedNonBiogenicCo2 Must enter value of CO2EmissionsNonBiogenic C C061 Non-biogenic carbon dioxide emissions (includes fossil fuel, sorbent, and process carbon dioxide emissions). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedNonBiogenicCo2 C C063 Total mass CO2 mass emissions measured by the CEMS (include both biogenic and non-biogenic emissions, and, if applicable, emissions for a slipstream that bypassed the CEMS). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails[2]/ Tier4Details/AnnualCO2EmissionsMeasuredByCEMS officialUnroundedCEMSorPart75Co2 Must enter value of Annual CO2EmissionsMeasuredByCEMS C C064 Carbon dioxide emissions measured by the CEMS (or applicable Part 75 methodology). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCEMSorPart75Co2 C C067 Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. /GHG/FacilitySiteInformation/FacilitySiteDetails /SubPartInformation/SubPartC/UnitsCDetails/ Tier4Details/CO2EmissionsBiogenic/CalculatedValue officialUnroundedBiogenicCo2 Within Common Stack or Duct (CEMS), must enter the value of Total annual non-biogenic CO2 mass emissions C C068 Biogenic carbon dioxide mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedBiogenicCo2 C C070 Total annual non-biogenic CO2 emissions (includes fossil fuel, sorbent, and process carbon dioxide emissions). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/ Tier4Details/CO2EmissionsBiogenic/CalculatedValue officialUnroundedNonBiogenicCo2 Within Common Stack or Duct (CEMS), must enter the value of Total annual biogenic CO2 mass emissions C C071 Non-biogenic carbon dioxide emissions (includes fossil fuel, sorbent, and process carbon dioxide emissions). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedNonBiogenicCo2 C C073 Total mass CO2 mass emissions measured by the CEMS (include both biogenic and non-biogenic emissions, and, if applicable, emissions for a slipstream that bypassed the CEMS). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/ Tier4Details/AnnualCO2EmissionsMeasuredByCEMS officialUnroundedCEMSorPart75Co2 Within the < Tier4Details > node for the applicable unit the < AnnualCO2EmissionsMeasuredByCEMS > node must be included with a non-null<CalculatedValue> C C074 Carbon dioxide emissions measured by the CEMS (or applicable Part 75 methodology). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCEMSorPart75Co2 C C077 Total biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails /CO2EmissionsAllBiomassFuelsCombined officialUnroundedAllBiomassFuelsCombinedCo2 Within the </UnitsCDetails > node for the applicable unit the <CO2EmissionsAllBiomassFuelsCombined > node must be included with a non-null<CalculatedValue> C C078 Carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil and biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 C C080 Total annual CO2 mass emissions at the monitored location (include both biogenic and non-biogenic emissions). This data element is required. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/Part75Details/AnnualCO2EmissionsMeasuredByPart75Method officialUnroundedCEMSorPart75Co2 Within the <Part75Details> node the <AnnualCO2EmissionsMeasuredByPart75Method> node must be included with a non-null<CalculatedValue> C C081 Total annual carbon dioxide mass emissions at the monitored location. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCEMSorPart75Co2 C C084 Total number of source operating hours in the reporting year that fuel flow rate was missing. This data element is required. operatingHoursFuelFlowRateMissing C C085 Total number of source operating hours in the reporting year that fuel flow rate was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursFuelFlowRateMissing C C086 Total number of source operating hours in the reporting year that higher heating value was missing. This data element is required. operatingHoursHHVMissing C C087 Total number of source operating hours in the reporting year that higher heating value was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursHHVMissing C C094 Total number of source operating hours in the reporting year that carbon dioxide concentration was missing. This data element is required. operatingHoursCo2Missing C C095 Total number of source operating hours in the reporting year that carbon dioxide concentration was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursCo2Missing C C096 Total number of source operating hours in the reporting year that stack gas flow rate was missing. This data element is required. operatingHoursStackGasFlowMissing C C097 Total number of source operating hours in the reporting year that stack gas flow rate was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursStackGasFlowMissing C C100b Annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 C C100c Annual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 C C101b Annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 C C103b Annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o C C103c Annual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o C C104b Annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o C C106b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 C C107b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 C C109b CO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 C C110b CO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o C C112b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 C C112c Annual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 C C113b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 C C115b CO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o C C115c Annual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o C C116b CO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o C C118 Please select a fuel or click CANCEL. fuelName C C119 Please provide a fuel name or click CANCEL. fuelName C C120 Fuel type. This is a required field. Please make a selection or click CANCEL. fuelType C C121 Please select a calculation methodology (i.e., tier) or click CANCEL. calculationMethodology C C122 You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate C C123 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate C C124 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate C C125 Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation /SubPartC/ UnitsCDetails/CO2EmissionsAllBiomassFuelsCombined officialUnroundedAllBiomassFuelsCombinedCo2 Single Units must include the <CO2EmissionsAllBiomassFuelsCombined> node and include a non-null <CalculatedValue> inside that node. C C126 Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 C C128 Annual carbon dioxide emissions from sorbent. If no sorbent was used in the configuration, enter zero for this field. This data element is required. officialUnroundedSorbentBasedCo2 C C129 Annual carbon dioxide emissions from sorbent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedSorbentBasedCo2 C C131 Annual carbon dioxide emissions from sorbent. If no sorbent was used in this configuration, enter zero for this field. This data element is required. officialUnroundedSorbentBasedCo2 C C132 Annual carbon dioxide emissions from sorbent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedSorbentBasedCo2 C C134 Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation /SubPartC/ UnitsCDetails/CO2EmissionsAllBiomassFuelsCombined officialUnroundedAllBiomassFuelsCombinedCo2 Aggregation of Units must include the <CO2EmissionsAllBiomassFuelsCombined> node and include a non-null <CalculatedValue> inside that node. C C135 Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 C C137 Annual carbon dioxide emissions from combustion of all fossil fuels combined (if any of the units burn fossil AND biomass). This data element is required. officialUnroundedAllFossilFuelsCombinedCo2 C C138 Annual carbon dioxide emissions from combustion of all fossil fuels combined (if any of the units burn fossil AND biomass). You must correct the current value before continuing. officialUnroundedAllFossilFuelsCombinedCo2 C C140 Total annual biogenic CO2 mass emissions from this unit. This data element is required. If you did not combust any biogenic or partly-biogenic fuels during the reporting year, enter a zero in this field. If you did not operate this unit during the reporting year, you may return to the Subpart C Overview page and remove the Operational check box within the CONFIGURATION SUMMARY table. GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation /SubPartC/ UnitsCDetails/CO2EmissionsAllBiomassFuelsCombined officialUnroundedAllBiomassFuelsCombinedCo2 Common pipe units must include the <CO2EmissionsAllBiomassFuelsCombined> node and include a non-null <CalculatedValue> inside that node. C C141 Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 C C143 Annual carbon dioxide emissions from combustion of all fossil fuels combined (if any of the units burn fossil AND biomass). This data element is required. officialUnroundedAllFossilFuelsCombinedCo2 C C144 Annual carbon dioxide emissions from combustion of all fossil fuels combined (if any of the units burn fossil AND biomass). You must correct the current value before continuing. officialUnroundedAllFossilFuelsCombinedCo2 C C149b Annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 C C149c Annual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 C C150b Annual methane emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 C C152b Annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o C C152c Annual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o C C153b Annual nitrous oxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o C C155b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 C C156b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 C C158b CO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o C C159b Carbon dioxide equivalent value for the annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o C C164 Frequency of higher heating value determinations. This data element is required. frequencyHHVDeterminations C C165 Frequency of higher heating value determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of higher heating value determinations in the text box provided. This data element is required. otherFrequencyHHVDeterminations C C166 Total number of valid carbon content determinations. This data element is required. numberOfCCs C C167 Total number of valid carbon content determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfCCs C C169 Total number of carbon content substitute data values. This data element is required. numberOfSubstituteCCs C C170 Total number of carbon content substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteCCs C C172 Frequency of carbon content determinations. This data element is required. frequencyCCDeterminations C C173 Frequency of carbon content determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of carbon content determinations in the text box provided. This data element is required. otherFrequencyCCDeterminations C C174 Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This data element is required. operatingHoursMissingFuelUsage C C175 Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursMissingFuelUsage C C177 Total number of valid carbon content determinations. This data element is required. numberOfCCs C C178 Total number of valid carbon content determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfCCs C C180 Total number of carbon content substitute data values. This data element is required. numberOfSubstituteCCs C C181 Total number of carbon content substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteCCs C C183 Frequency of carbon content determinations. This data element is required. frequencyCCDeterminations C C184 Frequency of carbon content determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of carbon content determinations in the text box provided. This data element is required. otherFrequencyCCDeterminations C C185 Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This data element is required. operatingHoursMissingFuelUsage C C186 Total number of operating hours in the reporting year for which missing data substitution was used for fuel usage. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursMissingFuelUsage C C188 Total number of valid molecular weight determinations. This data element is required. numberOfValidMWDeterminations C C189 Total number of valid molecular weight determinations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfValidMWDeterminations C C191 Total number of molecular weight substitute data values. This data element is required. numberOfSubstituteMWs C C192 Total number of molecular weight substitute data values. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSubstituteMWs C C194 Frequency of molecular weight determinations. This data element is required. frequencyMWDeterminations C C195 Frequency of molecular weight determinations. You selected "Other" from the pick list provided, but failed to specify the frequency of molecular weight determinations in the text box provided. This data element is required. otherFrequencyMWDeterminations C C199 Please make a selection or click CANCEL. configurationType C C200 Unit Name. This data element is required. Please enter the required data or click CANCEL. groupUnitName C C201 Unit type. This data element is required. Please enter the required data or click CANCEL. groupUnitType C C221 Annual CO2 emissions from combustion of the specified fuel (include both biogenic and non-biogenic emissions). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/TierFuelDetails/Tier1FuelDetails/EmissionsDetailsNode/TotalCO2CombustionEmissions officialUnroundedCo2 For RY10-RY12 for other fuels, within the <Tier1FuelDetails> for the applicable unit in the < EmissionsDetailsNode > node the <TotalCO2CombustionEmissions> must be included with a non-null <CalculatedValue> C C222 Annual carbon dioxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 C C225b Annual methane emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 C C228b Annual nitrous oxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o C C231b Carbon dioxide equivalent value for the annual methane emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 C C234b Carbon dioxide equivalent value for the annual nitrous oxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o C C236b Annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o C C236c Annual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o C C237b Annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o C C239b Annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 C C239c Annual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 C C240b Annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 C C245b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 C C246b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 C C248b CO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o C C249b CO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o C C251b Annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o C C251c Annual N2O emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedN2o C C252b N2O Emission. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o C C254b Annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 C C254c Annual CH4 emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCh4 C C255b CH4 emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 C C260b CO2 equivalent value for the annual CH4 emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 C C261b CO2 equivalent emissions from CH4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 C C263b CO2 equivalent value for the annual N2O emissions from combustion of the specified fuel. This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o C C264b CO2 equivalent emissions from N2O. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o C C266 Enter Own Result for Annual CH4 emissions from combustion of the specified fuel. This data element is required if you select Enter/Report Alternate Result. officialUnroundedCh4 C C267 Enter Own Result for Annual N2O emissions from combustion of the specified fuel. This data element is required if you select Enter/Report Alternate Result. officialUnroundedN2o C C272 Other Name is a required field when "OCS (Other combustion source)" is selected as the Unit Type. otherName C C273 Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. hasCEMS C C274 Please specify the feedstock type for this unit or click CANCEL feedStockType C C275 Molar Volume Constant (MVC) used. This data element is required. mvc C C276b Annual heat input for the specified fuel combusted by this unit. This data element is required. If the specified fuel was not combusted in this unit during the reporting year, delete it from your report. annualHeatInput C C276c Annual heat input for the specified fuel combusted by this unit (for Table C-2 components of the blend). This data element is required. If the specified fuel was not combusted in this unit during the reporting year, delete it from your report. annualHeatInput C C277b Annual heat input for the specified fuel combusted by this unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualHeatInput C C281-1 The Calculation Methodology End Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology End Date is within the current reporting year, and is after the Start Date. calculationMethodologyEndDate C C283-1 The Calculation Methodology Start Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology Start Date is within the current reporting year, and is prior to the End Date. calculationMethodologyStartDate C C284-1 The Calculation Methodology End Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology End Date is within the current reporting year, and is after the Start Date. calculationMethodologyEndDate C C285-1 The Calculation Methodology Start Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology Start Date is within the current reporting year, and is prior to the End Date. calculationMethodologyStartDate C C286-1 The Calculation Methodology End Date does not fall within the Reporting Year. Please revise and make sure the Calculation Methodology End Date is within the current reporting year, and is after the Start Date. calculationMethodologyEndDate C C287-1 Total amount of sorbent used during the reporting year. This data element is required. totalSorbentUsed C C287-2 Total amount of sorbent used during the reporting year. This data element is required. totalSorbentUsed C C288-1 Are CO2 emissions that are not monitored by a CEMS generated from sorbent injection? Please select "Yes" if you used Equation C-11 to calculate sorbent emissions, or, select "No" if you did not or if you are resubmitting a previous annual report for any other reason. You are not required to resubmit a Reporting Year 2010 or Reporting Year 2011 annual report for the sole purpose of replying "No" to this question. isSorbentUsedCEMS C C288-2 Are CO2 emissions that are not monitored by a CEMS generated from sorbent injection? Please select "Yes" if you used Equation C-11 to calculate sorbent emissions, or, select "No" if you did not or if you are resubmitting a previous annual report for any other reason. You are not required to resubmit a Reporting Year 2010 or Reporting Year 2011 annual report for the sole purpose of replying "No" to this question. isSorbentUsedCEMS C C289-1 Total amount of sorbent used during the reporting year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalSorbentUsed C C289-2 Total amount of sorbent used during the reporting year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalSorbentUsed C C291-1 Molecular weight of the sorbent. This data element is required. mwSorbent C C291-2 Molecular weight of the sorbent. This data element is required. mwSorbent C C292-1 Molecular weight of the sorbent. You must enter a value that is greater than zero. You must correct the current value before continuing. mwSorbent C C292-2 Molecular weight of the sorbent. You must enter a value that is greater than zero. You must correct the current value before continuing. mwSorbent C C294-1 The ratio ("R") used in Equation C-11. This data element is required. ratioR C C294-2 The ratio ("R") used in Equation C-11. This data element is required. ratioR C C295-1 The ratio ("R") used in Equation C-11. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratioR C C295-2 The ratio ("R") used in Equation C-11. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratioR C C297-1 Report which CO2 result? This data element is required. isUserOverriddenSorbentBasedCo2 C C297-2 Report which CO2 result? This data element is required. isUserOverriddenSorbentBasedCo2 C C309 Sample Analysis Results for first quarter. This data element is required. q1SampleAnalysisResult C C310 Sample Analysis Results for first quarter. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. q1SampleAnalysisResult C C312 Sample Analysis Results for second quarter. This data element is required. q2SampleAnalysisResult C C313 Sample Analysis Results for second quarter. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. q2SampleAnalysisResult C C315 Sample Analysis Results for third quarter. This data element is required. q3SampleAnalysisResult C C316 Sample Analysis Results for third quarter. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. q3SampleAnalysisResult C C318 Sample Analysis Results for fourth quarter. This data element is required. q4SampleAnalysisResult C C319 Sample Analysis Results for fourth quarter. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. q4SampleAnalysisResult C C341 Maximum rated heat input capacity of the unit. You must enter a value that is greater than or equal to zero and less than or equal to 250 (mmBtu/hr). You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/ IndividualUnitDetails or /CommonPipeDetail/ ratedHeatInputCapacity MaxRatedheatInputCapacity or HighestMaxRatedheatInputCapacity should be between 0 and 259. C C350 Annual CO2 emissions. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ GHGasInfoDetails>GHGasName totalnonbiogenicco2emission The summary for Subpart C must include the <GHGasInfoDetails> node with a <GHGASName> of "Carbon Dioxide" and a <GHGasQuanitity> with a non-null <CalculatedValue> C C351 Annual CH4 emissions. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ GHGasInfoDetails>GHGasName totalch4emission The summary for Subpart C must include the <GHGasInfoDetails> node with a <GHGASName> of "Methane" and a <GHGasQuanitity> with a non-null <CalculatedValue> C C352 Annual N2O emissions. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ GHGasInfoDetails>GHGasName totaln20emission The summary for Subpart C must include the <GHGasInfoDetails> node with a <GHGASName> of "Nitrous Oxide" and a <GHGasQuanitity> with a non-null <CalculatedValue> C C353 Annual biogenic CO2 emissions. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ GHGasInfoDetails>GHGasName totalbiogenicco2emission The summary for Subpart C must include the <GHGasInfoDetails> node with a <GHGASName> of "Biogenic Carbon Dioxide" and a <GHGasQuanitity> with a non-null <CalculatedValue> C C359-1 The combination of fuel type and tier methodology reported for unit [{1}] is invalid. You may not use the Tier 2 methodology with a fuel that is not included in Table C-1 of subpart C. You must select a different methodology for the [{2}] fuel type before continuing. calculationMethodology C C454 Measured high heat value of the solid fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. Please enter the required data. highHeatValue C C455 Measured high heat value of the solid fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. highHeatValue C C458 Carbon content of the solid fuel, for month(s) [{1}]. Please enter the required data. carbonContent C C459 Carbon content of the solid fuel, for month(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing. carbonContent C C461 Mass of the solid fuel combusted during month(s) [{1}] from company records is required. Please enter the required data. fuelCombusted C C462 Mass of the solid fuel combusted during month(s) [{1}], from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelCombusted C C464 Measured high heat value of the liquid fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. Please enter the required data. highHeatValue C C465 Measured high heat value of the liquid fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. highHeatValue C C468 Carbon content of the liquid fuel, for month(s) [{1}]. Please enter the required data. carbonContent C C469 Carbon content of the liquid fuel, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContent C C472 Volume of the liquid fuel combusted during month(s) [{1}] from company records is required. Please enter the required data. fuelCombusted C C473 Volume of the liquid fuel combusted during month(s) [{1}], from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelCombusted C C475 Measured high heat value of the gaseous fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. Please enter the required data. highHeatValue C C476 Measured high heat value of the gaseous fuel, for month(s) [{1}] (which may be the arithmetic average of multiple determinations), or, if applicable, an appropriate substitute data value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. highHeatValue C C479 Carbon content of the gaseous fuel, for month(s) [{1}]. Please enter the required data. carbonContent C C480 Carbon content of the gaseous fuel, for month(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing. carbonContent C C481 Molecular weight of the gaseous fuel, for month(s) [{1}]. Please enter the required data. molecularWt C C482 Molecular weight of the gaseous fuel, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. molecularWt C C484 Volume of the gaseous fuel combusted during month(s) [{1}] from company records is required. Please enter the required data. fuelCombusted C C485 Volume of the gaseous fuel combusted during month(s) [{1}], from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelCombusted C C506b Annual heat input for the specified fuel combusted by this unit. This data element is required. If the specified fuel was not combusted in this unit during the reporting year, delete it from your report. annualHeatInput C C507b Annual CH4 emissions from combustion of the specified fuel. This data element is required. officialUnroundedCh4 C C508b Annual CH4 emissions from combustion of the specified fuel. This data element is required. officialUnroundedCh4 C C529 The cumulative maximum rated heat input capacity for all units within the configuration that have a maximum rated heat input capacity greater than or equal to 10 mmBtu/hr. This data element is required. cumulativeRatedHeatInputCapacity C C530 The cumulative maximum rated heat input capacity for all units within the configuration that have a maximum rated heat input capacity greater than or equal to 10 mmBtu/hr. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. cumulativeRatedHeatInputCapacity C C532 Moisture content of the fuel used (percent). This data element is required. equationInput C C532-1 Moisture content of the fuel used (percent). You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. equationInput C C536 The annual CH4 as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual CH4 emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier1AnnualCH4CO2E] C C537 The annual CH4 as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual CH4 emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier2AnnualCH4CO2E] C C538 The annual CH4 as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual CH4 emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier3AnnualCH4CO2E] C C542 The annual N2O as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual N2O emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier1AnnualN2OCO2E] C C543 The annual N2O as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual N2O emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier2AnnualN2OCO2E] C C544 The annual N2O as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual N2O emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier3AnnualN2OCO2E] C C546 The annual CH4 as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual CH4 emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier4AnnualCH4CO2E] C C548 The annual N2O as CO2e emissions of {1} metric tons for the fuel {2} at the unit {3} does not equal its annual N2O emissions of {4} metric tons multiplied by its GWP. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tier4AnnualN2OCO2E] C C558 The annual biogenic CO2 emissions of {1} metric tons reported at the configuration level for the unit {2} is greater than the sum of all CO2 emissions reported at the fuel level of {3} metric tons for all fuels at the unit. Please address this critical error. Then you can return here to perform another final review and submit your report. data[subpartCAnnualUnitBiogenicCO2] C C561 The Equation C-2a calculation method for the unit {1} is not appropriate for Municipal Solid Waste. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] C C562 The Equation C-2c calculation method is only valid for solid fuels, so the fuel {1} for unit {2} is not appropriate. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] C C563 The Equation C-3 calculation method is only appropriate for solid fuels, so the fuel {1} for unit {2} is not appropriate. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] C C564 The Equation C-4 calculation method is only appropriate for liquid fuels, so the fuel {1} for unit {2} is not appropriate. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] C C565 The Equation C-5 calculation method is only appropriate for gaseous fuels, so the fuel {1} for unit {2} is not appropriate. Please address this critical error. Then you can return here to perform another final review and submit your report. data[tierName] C C572 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID C C573 Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod C C574 Row {1} of this Tier 2 equation inputs form contains a unit/fuel combination on row {1} that does not exist within e-GGRT for this facility and reporting year. The unit name, fuel name, equation used to calculate CO2 emissions, and whether or not you have elected to use IVT for the unit must match an existing unit/fuel combination within e-GGRT. unitName C C575 The system encountered an unexpected value in row {1}, Column B7 (Fuel-Specific CH4 Emission Factor). Acceptable values are "0.011 (default)" and "0.001 (alternate)." This file cannot be uploaded. Please correct this issue. ch4EmissionFactor C C576 The system encountered an unexpected value in row {1}, Column B8 (HHV Calculation Methodology). Acceptable values are "Annual average" and "Weighted average (Equation C-2b)." This file cannot be uploaded. Please correct this issue. highHeatMethod C C577 The system encountered one or more unexpected values in row {1}, Columns B34-B45 (Identify each month for which the monthly HHV value is calculated using one or more substitute data values). Acceptable values are Yes and No. This file cannot be uploaded. Please correct this issue. isHHVSubstituted C C578 The system encountered one or more unexpected values in row {1} Column B46 (Frequency of HHV Determinations). Acceptable values are Hourly, Daily, Weekly, Monthly, Semiannually, Quarterly, Once per fuel lot, Upon addition of oil to the storage tank, and Other (specify). This file cannot be uploaded. frequencyHHVDeterminations C C579 In row {1} you have indicated that the unit was non-operational for one or more months in the monthly HHV portion of the inputs form but not in the monthly quantity portion of the inputs form, or vice versa. This file cannot be uploaded. Please correct this issue. monthlyHighHeatValue C C579-1 The system encountered an unexpected value in row {1}, column B60 (Ratio of the Boiler' Maximum Rated Heat Input Capacity to its Design Rated Steam Output Capacity). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. boilerHeat C C579-2 The system encountered one or more unexpected values in row {1}, columns B48-B59 (Total Mass of Steam Generated by MSW or Solid Fuel Combustion During the Month). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyMassOfSteam C C579-3 The system encountered one or more unexpected values in row {1}, columns B10-B21 (Measured HHV of the Fuel, for Month, or, if Applicable, an Appropriate Substitute Data Value). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyHighHeatValue C C579-4 The system encountered one or more unexpected values in row {1}, columns B22-B33 (Quantity of the Fuel Combusted, for Month). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyFuelQuantity C C579-5 The system encountered an unexpected value in row {1}, column B6 (Mass or Volume of Fuel Combusted). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. quantityOfFuel C C579-6 The system encountered an unexpected value in row {1}, column B9 (Annual Average HHV). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualAverageHHV C C579-7 The system encountered an unexpected value in row {1}, column B47 (Frequency of HHV Determinations - Specify "Other" Selection). You must enter the frequency at which HHV determinations were made because you selected "Other (specify)" in column B46. This file cannot be uploaded. Please correct this issue. frequencyHHVDeterminationsOther C C580 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID C C581 Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod C C582 Row {1} of this Tier 3 equation inputs form contains a unit/fuel combination on row {1} that does not exist within e-GGRT for this facility and reporting year. The unit name, fuel name, equation used to calculate CO2 emissions, and whether or not you have elected to use IVT for the unit must match an existing unit/fuel combination within e-GGRT. unitName C C583 The system encountered an unexpected value in row {1}, Column B8 (Fuel-Specific CH4 Emission Factor). Acceptable values are "0.011 (default)" and "0.001 (alternate)." This file cannot be uploaded. Please correct this issue. ch4EmissionFactor C C583-1 The system encountered an unexpected value in row {1}, column B7 (Mass or Volume of Fuel Combusted). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualMassorVolOfFuel C C583-2 The system encountered an unexpected value in row {1}, column B52 (Total Number of Valid Carbon Content Determinations). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. totalValidCC C C583-3 The system encountered an unexpected value in row {1}, column B53 (Total Number of Carbon Content Substitute Data Values). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. totalCCSubstituteValue C C583-4 The system encountered an unexpected value in row {1}, column B56 (Total Number of Operating Hours in the Reporting Year for Which Missing Data Substitution was Used for Fuel Usage). You must enter a value that is greater than or equal to zero and less than or equal to 8784. This file cannot be uploaded. Please correct this issue. totalOperatingHour C C583-5 The system encountered an unexpected value in row {1}, column B57 (Total Number of Valid Molecular Weight Determinations). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. totalValidMW C C583-6 The system encountered an unexpected value in row {1}, column B58 (Total Number of Molecular Weight Substitute Data Values). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. totalMWSubstituteValue C C584 The system encountered an unexpected value in row {1}, Column B9 (Carbon Content Methodology). Acceptable values are "Annual average" and "Weighted average (Equation C-2b)." This file cannot be uploaded. Please correct this issue. ccCalcMethod C C584-1 The system encountered an unexpected value in row {1}, column B10 (Annual Average Carbon Content). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualAverageCCFuel C C585 The system encountered an unexpected value in row {1}, Column B11 (Molecular Weight Calculation Methodology for Gaseous Fuel). Acceptable values are "Annual average" and "Weighted average (Equation C-2b)." This file cannot be uploaded. Please correct this issue. mwCalcMethod C C585-1 The system encountered an unexpected value in row {1}, column B12 (Annual Average Molecular Weight). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualAvgMWFuel C C586 The system encountered an unexpected value in row {1}, Column B13 (Molar Volume Constant Used). Acceptable values are "836.6 (Scf/kg-mole)" and "849.5 (Scf/kg-mole)" This file cannot be uploaded. Please correct this issue. molarVolumeConstant C C587 The system encountered an unexpected value in row {1}, Column B14 (HHV Calculation Methodology). Acceptable values are "Annual average" and "Default." This file cannot be uploaded. Please correct this issue. hhvCalcMethod C C587-1 The system encountered an unexpected value in row {1}, column B15 (Annual Average HHV). You must enter a value that is greater than or equal to zero. This file cannot be uploaded. Please correct this issue. annualAvgHHV C C588 The system encountered an unexpected value in row {1} Column B54 (Frequency of Carbon Content Determinations). Acceptable values are Hourly, Daily, Weekly, Monthly, Semiannually, Quarterly, Once per fuel lot, Upon addition of oil to the storage tank, Other (specify). This file cannot be uploaded. Please correct this issue. frequencyCCDeterminations C C588-1 You did not provide a value in row {1}, column B55 (Frequency of Carbon Content - Specify "Other" Selection). You must enter the frequency at which Frequency of Carbon Content determinations were made because you selected "Other (specify)" in column B54. This file cannot be uploaded. Please correct this issue. frequencyCCDeterminationsOther C C589 The system encountered an unexpected value in row {1} Column B59 (Frequency of Molecular Weight Determinations). Acceptable values are Hourly, Daily, Weekly, Monthly, Semiannually, Quarterly, Once per fuel lot, Upon addition of oil to the storage tank, Other (specify). This file cannot be uploaded. Please correct this issue. frequencyMWDDeterminations C C589-1 You did not provide a value in row {1}, column B60 (Frequency of Molecular Weight - Specify "Other" Selection). You must enter the frequency at which Frequency of Molecular Weight determinations were made because you selected "Other (specify)" in column B59. This file cannot be uploaded. Please correct this issue. frequencyMWDDeterminationsOther C C590 In row {1} you have not consistently indicated that the unit was non-operational for one or more months. If the unit was non-operational for a certain month, please be sure you have reported "NA" for the monthly carbon content and monthly fuel quantity fields. This file cannot be uploaded. Please correct this issue. monthlyCarbonContent C C591 In row {1} you have not consistently indicated that the unit was non-operational for one or more months. If the unit was non-operational for a certain month, please be sure you have reported "NA" for the monthly carbon content, monthly molecular weight (only for gaseous fuels), and monthly fuel quantity fields. This file cannot be uploaded. Please correct this issue. monthlyMolecularWeight C C591-1 The system encountered one or more unexpected values in row {1}, columns B28-B39 (Quantity of the Fuel Combusted, for Month). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyFuelQuantity C C591-2 The system encountered one or more unexpected values in row {1}, columns B16-B27 (Monthly Carbon Content). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyCarbonContent C C591-3 The system encountered one or more unexpected values in row {1}, columns B40-B51 (Monthly Molecular Weight of the Gaseous Fuel). You must enter non-zero values, however if the unit was non-operational in a month you must enter "NA". This file cannot be uploaded. Please correct this issue. monthlyMolecularWeight C C602 The highest maximum rated heat input capacity of any unit in the group (aggregation), or the highest maximum rated heat input capacity of any unit served by the common pipe. This data element cannot be greater than the cumulative maximum rated heat input capacity. cumulativeRatedHeatInputCapacity C C854 You have reported all zeros or a combination of non-zero and zero values for equation inputs for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted or enter non-zero values for all equation inputs. You must correct this before continuing or click Cancel. monthApplicable C C855 You have reported a zero for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted. You must correct this before continuing or click Cancel. monthApplicable C CFuel-1 The "Other Fuel or Blend" that you are attempting to add is already included in the Table C-1 pick list shown on the previous page. Please click CANCEL to return to the previous page and choose a fuel from standard fuel types listed. If you truly have a non-standard fuel type not listed in Table C-1, enter the unique name here. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/UnitsCDetails/UnitIdentification/UnitName customFuelExists Subpart C must include at least one <UnitsCDetails> node with a <UnitName> C FM-1 This fuel is already being used in this Unit for this facility. Please select a different fuel. fuel C IVT-C854 You have reported all zeros or a combination of non-zero and zero values for equation inputs for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted or enter non-zero values for all equation inputs. You must correct this before continuing or click Cancel. monthApplicable C IVT-C855 You have reported a zero for the following months: [{1}]. Please uncheck the box next to any month during which this fuel was not combusted. You must correct this before continuing or click Cancel. monthApplicable C (Abbr) FM-1 This fuel is already being used in this Unit for this facility. Please select a different fuel. fuel CC CC009 Is this manufacturing line\'s emissions monitored using a CEMS?. This data element is required. Please enter the required data or click CANCEL. hasCEMS CC CC011 Calculation method used to estimate CO2 process emissions. This data element is required. co2EmissionCalculationMethod CC CC013 Annual production of soda ash. This data element is required. annualProductionOfSodaAsh CC CC014 Annual production of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionOfSodaAsh CC CC016 Annual production capacity of soda ash. This data element is required. annualProductionCapacityOfSodaAsh CC CC017 Annual production capacity of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionCapacityOfSodaAsh CC CC019 Annual CO2 process emissions for the manufacturing line. This data element is required. co2EmissionsEqCC5 CC CC020 Annual CO2 emissions for the manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2EmissionsEqCC5 CC CC021 The number of months that missing data procedures were followed to determine the process vent flow rate from mine water stripper/evaporator. This data element is required. numberOfMonthsMissingDataProcessVentFlow CC CC022 Total number of soda ash manufacturing lines not monitored by CEMS. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSodaAshNoCemsProcessLines CC CC032 The number of months that missing data procedures were followed to determine the monthly mass of soda ash. This data element is required. monthlySodaAshMass CC CC035 The number of weeks that missing data procedures were followed to determine the inorganic carbon content of soda ash. This data element is required. monthlySodaAshCarbonContent CC CC036 The number of weeks that missing data procedures were followed to determine the inorganic carbon content of soda ash. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing. monthlySodaAshCarbonContent CC CC040 The number of months that missing data procedures were followed to determine the monthly mass of trona. This data element is required. monthlyTronaMass CC CC043 The number of weeks that missing data procedures were followed to determine the inorganic carbon content of trona. This data element is required. monthlyTronaCarbonContent CC CC044 The number of weeks that missing data procedures were followed to determine the inorganic carbon content of trona. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing. monthlyTronaCarbonContent CC CC047 Annual consumption of trona for each manufacturing line. This data element is required. annualConsumptionOfTrona CC CC048 Annual consumption of trona for each manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualConsumptionOfTrona CC CC050 Annual consumption of liquid alkaline for each manufacturing line. This data element is required. annualConsumptionOfLiquidAlkaline CC CC051 Annual consumption of liquid alkaline for each manufacturing line. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualConsumptionOfLiquidAlkaline CC CC053 Annual production of soda ash. This data element is required. annualProductionOfSodaAsh CC CC054 Annual production of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionOfSodaAsh CC CC056 Annual production capacity of soda ash. This data element is required. annualProductionCapacityOfSodaAsh CC CC057 Annual production capacity of soda ash. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionCapacityOfSodaAsh CC CC123 You have added Subpart CC, but have not yet added a manufacturing line. sodaAshUnitNoCemsDTOMap[1] CC CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML CC CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits CC CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml CC CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions CC CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs CC CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt CC CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow CC CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture CC CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow CC CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits CC CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions CC CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission CC CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission CC CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission CC CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission CC CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> CC CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 CC CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs CC CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt CC CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate CC CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate CC CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType CC CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate CC CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] CC CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] CC CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] CC CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] CC CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] CC CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] CC CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] CC CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] CC CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName CC CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted CC CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission CC CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission CC CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted CC CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions CC CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate CC CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate CC CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate CC CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate CC UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName CC UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType D ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] D ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] D D-EF-1 You have not added a fuel for this unit, pipe, or stack. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/TierFuelDetails/FuelType> nofuels Each unit must include at least one <FuelType> D D-EU-1 You have selected Subpart D for reporting, but you have not yet added a unit, pipe, or stack. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName nounits Subpart D must include at least one <UnitsCDetails> node with a <UnitName> D D001 Part 75 methodology. This data element is required. part75Methodology D D002 You did not indicate if this unit or group of units reports under Part 75 (Acid Rain Program). This data element is required. hasAcidRainProgram D D003 You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. calculationMethodologyEndDate D D004 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyStartDate D D005 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. calculationMethodologyEndDate D D006 Please select a fuel or click CANCEL. fuelName D D007 Please provide a fuel name or click CANCEL. fuelName D D008 Fuel type. This is a required field. Please make a selection or click CANCEL. fuelType D D009b Carbon dioxide equivalent value for the annual methane emissions from combustion of the specified fuel. This data element is required. officialUnroundedCo2EquivalentCh4 D D009c Carbon dioxide equivalent value for the annual methane emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentCh4 D D010 Carbon dioxide equivalent value for the annual methane emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentCh4 D D012b Carbon dioxide equivalent value for the annual nitrous oxide emissions from combustion of the specified fuel. This data element is required. officialUnroundedCo2EquivalentN2o D D012c Carbon dioxide equivalent value for the annual nitrous oxide emissions from combustion of the specified fuel (for Table C-2 components of the blend). This data element is required. If you did not combust the specified fuel in this unit during the reporting year, delete it from your report. officialUnroundedCo2EquivalentN2o D D013 Carbon dioxide equivalent value for the annual nitrous oxide emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2EquivalentN2o D D015 Annual carbon dioxide emissions (metric tons) from combustion of the specified fuel. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartD/UnitDDetail/AnnualCO2EmissionsMonitoredLocationMetricTonss officialUnroundedCo2 Within the <UnitDDetails> for the applicable unit in the < AnnualCO2EmissionsMonitoredLocationMetricTons > node must be included with a non-null <CalculatedValue> D D015X Annual carbon dioxide emissions (metric tons) from combustion of the specified fuel. This data element can not be smaller than the biogenic carbon dioxide mass emissions. officialUnroundedCo2 D D016 Annual carbon dioxide emissions (metric tons) from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 D D018 Annual carbon dioxide emissions (short tons) from combustion of the specified fuel. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartD/UnitDDetails/AnnualCO2EmissionsMonitoredLocationShortTons officialUnroundedCo2Shortton Within the <UnitDDetails> for the applicable unit in the < AnnualCO2EmissionsMonitoredLocationShortTons > node must be included with a non-null <CalculatedValue> D D019 Annual carbon dioxide emissions (short tons) from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2Shortton D D021 Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartD/UnitDDetails/ AnnualCO2EmissionsAllBiomassFuelsCombined officialUnroundedAllBiomassFuelsCombinedCo2 Within the <UnitDDetails> for the applicable unit in the < AnnualCO2EmissionsAllBiomassFuelsCombined > node must be included with a non-null <CalculatedValue> D D022 Annual carbon dioxide emissions from combustion of all biomass fuels combined (if any of the units burn fossil AND biomass). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAllBiomassFuelsCombinedCo2 D D024 Total number of source operating hours in the reporting year that carbon dioxide concentration was missing. This data element is required. operatingHoursCo2Missing D D025 Total number of source operating hours in the reporting year that carbon dioxide concentration was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursCo2Missing D D027 Total number of source operating hours in the reporting year that stack gas flow rate was missing. This data element is required. operatingHoursStackGasFlowMissing D D028 Total number of source operating hours in the reporting year that stack gas flow rate was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursStackGasFlowMissing D D032 Total number of source operating hours in the reporting year that fuel carbon content was missing. This data element is required. operatingHoursCCMissing D D033 Total number of source operating hours in the reporting year that fuel carbon content was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursCCMissing D D035 Total number of source operating hours in the reporting year that fuel flow rate was missing. This data element is required. operatingHoursFuelFlowRateMissing D D036 Total number of source operating hours in the reporting year that fuel flow rate was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursFuelFlowRateMissing D D038 Total number of source operating hours in the reporting year that higher heating value was missing. This data element is required. operatingHoursHHVMissing D D039 Total number of source operating hours in the reporting year that higher heating value was missing. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to {1} (hours). The value you provided is outside that range. You must correct the current value before continuing. operatingHoursHHVMissing D D050b Annual heat input. This data element is required. annualHeatInput D D050c Annual heat input. Annual heat input for the specified fuel combusted by this unit (for Table C-2 components of the blend). This data element is required. If the specified fuel was not combusted in this unit during the reporting year, delete it from your report. annualHeatInput D D051 Annual heat input. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualHeatInput D D053b Annual CH4 emissions from combustion of the specified fuel. This data element is required. officialUnroundedCh4 D D054 Annual CH4 emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 D D056b Annual N2O emissions from combustion of the specified fuel. This data element is required. officialUnroundedN2o D D057 Annual N2O emissions from combustion of the specified fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o D D059b Report which CH4 result. This data element is required. isUserOverriddenCh4 D D059c Use which CH4 result? This data element is required. isUserOverriddenCh4 D D060b Report which N2O result?. This data element is required. isUserOverriddenN2o D D060c Use which N2O result? This data element is required. isUserOverriddenN2o D D064c Plant code(s) associated with any combustion unit(s) included in this configuration. This data element is required. plantCodeList D D070 The annual CH4 emissions for Subpart D have not been reported. This data element is required. transientData['subpartDAnnualCh4'] D D071 The annual N2O emissions for Subpart D have not been reported. This data element is required. transientData['subpartDAnnualN2o'] D D072 The annual CO2 emissions for Subpart D have not been reported. This data element is required. transientData['subpartDAnnualCo2'] D D073 The value for the unit of measure for the reported data element "Annual CO2 Emissions Including Biomass (short tons)" for the unit(s) {1} was reported as something other than "Short Tons" in your XML submission. This unit of measure should be reported as "Short Tons". Please review the XML "AnnualCO2EmissionsMonitoredLocationShortTons" data element for this unit(s). Please address this critical error. Then you can return here to perform another final review and submit your report. data['failedShortTonsValidation'] D D074 The value for the unit of measure for the reported data element "Annual CO2 Emissions Including Biomass (metric tons)" for the unit(s) {1} was reported as something other than "Metric Tons" in your XML submission. This unit of measure should be reported as "Metric Tons". Please review the XML "AnnualCO2EmissionsMonitoredLocationMetricTons" data element for this unit(s). Please address this critical error. Then you can return here to perform another final review and submit your report. data['failedMetricTonsValidation'] D D101 The same unit, stack or pipe ID already exists for this facility. Please enter a unique unit, stack or pipe ID. If the calculation methodology changed during the reporting year, use the base name or identifier for the methodology used at the end of the reporting year (e.g. "CT3"), and append an indicator to the base unit, stack, or pipe ID (e.g. "CT3-CEMS" or "CT3-G4") for methodologies used earlier in the reporting year. groupUnitName D D102 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. groupUnitName D D103 Unit type. This data element is required. Please enter the required data or click CANCEL. groupUnitType D UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName D UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType DD ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] DD ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] DD DD0001 GHGRP ID. This data element is required and must be the same as the GHGRP ID for the facility. ghgrpid DD DD0002 Reporting Period. This data element is required and must be the same as the calendar year for which data is reported. reportingPeriod DD DD0003 Length of transmission lines carrying voltages above 35 kilovolt. This data element is required. transLinesAbove35Length DD DD0005 Were missing data used for the length of transmission lines carrying voltages above 35 kilovolt. This data element is required. transLinesAbove35Missing DD DD0006 If missing data procedures were used for the length of transmission lines carrying voltage above 35 kilovolts, you must provide a reason the data were missing. transLinesAbove35Reason DD DD0007 If missing data procedures were used for the length of transmission lines carrying voltage above 35 kilovolts, you must report the method used for estimating missing data. transLinesAbove35Method DD DD0008 Length of distribution lines carrying voltages at or below 35 kilovolt. This data element is required. distLinesAtBelow35Length DD DD0010 Were missing data used for the length of distribution lines carrying voltages at or below 35 kilovolt? This data element is required. distLinesAtBelow35Missing DD DD0011 If missing data procedures were used for the length of distributions lines carrying voltage at or below 35 kilovolt, please report the reason the data were missing. This data element is required. distLinesAtBelow35Reason DD DD0012 If missing data procedures were used for the length of distributions lines carrying voltage at or below 35 kilovolt, please report the method used for estimating missing data. This data element is required. distLinesAtBelow35Method DD DD0374 Beginning Nameplate Capacity, excluding hermetically sealed-pressure switchgear. This data element is required. beginningNameplateCapacity DD DD0376 Beginning Nameplate Capacity, excluding hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. beginningNameplateCapacity DD DD0383 Were missing data used for the quantity of the GHG stored in containers, but not in energized equipment, at the beginning of the year? This data element is required. contNotEnergizedBegMissing DD DD0384 Containers Not Energized At Beginning of Year. If missing data were used for the quantity of GHG stored in containers but not in energized equipment at the beginning of the year, you must provide a reason the data were missing. contNotEnergizedBegReason DD DD0385 Containers Not Energized At Beginning of Year. If missing data were used for the quantity of GHG stored in containers but not in energized equipment at the beginning of the year, you must report the method used for estimating missing data. contNotEnergizedBegMethod DD DD0386 Were missing data used for the quantity of the GHG stored in containers, but not in energized equipment, at the end of the year? This data element is required. contNotEnergizedEndMissing DD DD0387 Containers Not Energized At End of Year. If missing data were used for the quantity of GHG stored in containers but not in energized equipment at the end of the year, you must provide a reason the data were missing. contNotEnergizedEndReason DD DD0388 Containers Not Energized At End of Year. If missing data were used for the quantity of GHG stored in containers but not in energized equipment at the end of the year, you must report the method used for estimating missing data. contNotEnergizedEndMethod DD DD0389 Were missing data used for the quantity of the GHG purchased in bulk from chemical producers or distributors? This data element is required. bulkChemProducersMissing DD DD0390 Purchased GHG From Bulk Chemical Producers. If missing data were used for the quantity of GHG purchased in bulk from chemical producers or distributers, you must provide a reason the data were missing. bulkChemProducersReason DD DD0391 Purchased From Bulk Chemical Producers. If missing data were used for the quantity of GHG purchased in bulk from chemical producers or distributers, you must report the method used for estimating missing data. bulkChemProducersMethod DD DD0392 Were missing data used for the quantity of the GHG purchased from equipment manufacturers or distributors with or inside equipment, including hermetically sealed-pressure switchgear? This data element is required. insideEqMissing DD DD0393 Inside Equipment. If missing data procedures were used for the quantity of GHG purchased from equipment manufacturers or distributors with or inside equipment (including hermetically sealed pressure switchgear), you must provide a reason the data were missing. insideEqReason DD DD0394 Inside Equipment. If missing data procedures were used for the quantity of GHG purchased from equipment manufacturers or distributors with or inside equipment (including hermetically sealed pressure switchgear), you must report the method used for estimating missing data. insideEqMethod DD DD0395 Were missing data used for the quantity of the GHG returned to facility after off-site recycling? This data element is required. returnedAfterRecycleMissing DD DD0396 Returned After Off-site Recycling. If missing data were used for the quantity of GHG returned to the facility after off-site recycling, you must provide a reason the data were missing. returnedAfterRecycleReason DD DD0397 Returned After Off-site Recycling. If missing data were used for the quantity of GHG returned to the facility after off-site recycling, you must report the method used for estimating missing data. returnedAfterRecycleMethod DD DD0398 Were missing data used for the quantity of the GHG in bulk and contained in equipment sold to other entities? This data element is required. eqSoldMissing DD DD0399 Equipment Sold. If missing data procedures were used for the quantity of GHG in bulk and contained in equipment sold to other entities, you must provide a reason the data were missing. eqSoldReason DD DD0400 Equipment Sold. If missing data procedures were used for the quantity of GHG in bulk and contained in equipment sold to other entities, you must report the method used for estimating missing data. eqSoldMethod DD DD0401 Were missing data used for the quantity of the GHG returned to suppliers? This data element is required. returnToSuppliersMissing DD DD0402 Returned to Suppliers. If missing data procedures were used for the quantity of GHG returned to suppliers, you must provide a reason the data were missing. returnToSuppliersReason DD DD0403 Returned to Suppliers. If missing data procedures were used for the quantity of GHG returned to suppliers, you must report the method used for estimating missing data. returnToSuppliersMethod DD DD0404 Were missing data used for the quantity of the GHG sent off-site for recycling? This data element is required. sentOffRecycleMissing DD DD0405 Sent Off Recycle. If missing data procedures were used for the quantity of GHG sent off site for recycling, you must provide a reason the data were missing. sentOffRecycleReason DD DD0406 Sent Off Recycle. If missing data procedures were used for the quantity of GHG sent off site for recycling, you must report the method used for estimating missing data. sentOffRecycleMethod DD DD0407 Were missing data used for the quantity of the GHG sent off-site for destruction? This data element is required. destructionMissing DD DD0408 Destruction. If missing data procedures were used for the quantity of GHG sent off site for destruction, you must provide a reason the data were missing. destructionReason DD DD0409 Destruction. If missing data procedures were used for the quantity of GHG sent off site for destruction, you must report the method used for estimating missing data. destructionMethod DD DD0415 SF6 or PFC: Pounds of SF6 or PFC stored in containers, but not in energized equipment, at the beginning of the year. This data element is required. notEnergizedBegLbs DD DD0417 SF6 or PFC: Pounds of SF6 or PFC stored in containers, but not in energized equipment, at the end of the year. This data element is required. notEnergizedEndLbs DD DD0419 SF6 or PFC: Pounds of SF6 or PFC purchased from chemical producers or distributors in bulk. This data element is required. purchasedFromChemLbs DD DD0421 SF6 or PFC: Pounds of SF6 or PFC purchased from equipment manufacturers or distributors with or inside equipment, including hermetically sealed-pressure switchgear. This data element is required. purchasedFromEqManufLbs DD DD0423 SF6 or PFC: Pounds of SF6 or PFC returned to facility after off-site recycling. This data element is required. offSiteRecycleReturnLbs DD DD0425 SF6 or PFC: Pounds of SF6 or PFC in bulk and contained in equipment that is sold to other entities. This data element is required. eqSoldLbs DD DD0427 SF6 or PFC: Pounds of SF6 or PFC returned to suppliers. This data element is required. returnedToSuppliersLbs DD DD0429 SF6 or PFC: Pounds of SF6 or PFC sent off site for recycling. This data element is required. sentOffRecycleLbs DD DD0431 SF6 or PFC: Pounds of SF6 or PFC sent off-site for destruction. This data element is required. sentOffDestructionLbs DD DD0432 Total facility GHG emissions according to Equation DD-1. This data element is required. userEmissionLbs DD DD0433 Total facility GHG emissions according to Equation DD-1. You must enter values that result in an emission value that is greater than or equal to 0. You must correct the current value before continuing. userEmissionLbs DD DD0434 Were missing data methods used for nameplate capacity of new equipment other than hermetically sealed-pressure switchgear during the year? This data element is required. wereMissingHermeticallySealed DD DD0435 New equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. reasonHermeticallySealed DD DD0436 New equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, report the method used for estimating the missing data. This data element is required. methodHermeticallySealed DD DD0437 Were missing data methods used for nameplate capacity of retired equipment other than hermetically sealed-pressure switchgear during the year? This data element is required. wereMissingUsedCapacityRetired DD DD0438 Retired equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. capacityRetiredEqReason DD DD0439 Retired equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, report the method used for estimating the missing data. This data element is required. capacityRetiredEqMethod DD DD0440 Were missing data methods used for the number of new hermetically sealed-pressure switchgear? This data element is required. wereMissingUsedNewHerm DD DD0441 New hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. newHermReason DD DD0442 New hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, report the method used for estimating the missing data. This data element is required. newHermMethod DD DD0443 Were missing data methods used for the number of new equipment other than hermetically sealed-pressure switchgear? This data element is required. wereMissingUsedEquipOther DD DD0444 New equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. equipOtherReason DD DD0445 New equipment other than hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, report the method used for estimating the missing data. This data element is required. equipOtherMethod DD DD0446 Were missing data methods used for the number of retired hermetically sealed-pressure switchgear? This data element is required. wereMissingUsedRetiredHerm DD DD0447 Retired hermetically sealed-pressure switchgear. If missing data procedures were used for this data element, you must provide a reason the data were missing. retiredHermReason DD DD0448 Retired hermetically sealed-pressure switchgear. If you used the missing data procedures for this data element, you must report the method used for estimating missing data. This data element is required. retiredHermMethod DD DD0449 Were missing data methods used for the number of retired equipment other than hermetically sealed-pressure switchgear? This data element is required. wereMissingUsedRetiredEqOther DD DD0450 Retired equipment other than hermetically sealed-pressure switchgear. If you used the missing data procedures for this data element, you must provide a reason the data were missing. retiredEqOtherReason DD DD0451 Retired equipment other than hermetically sealed-pressure switchgear. If you used the missing data procedures for this data element, you must report the method used for estimating missing data. This data element is required. retiredEqOtherMethod DD DD0453 SF6 or PFC: Nameplate Capacity of new equipment other than hermetically sealed-pressure switchgear. This data element is required. nameplateCapacityNewEquip DD DD0455 SF6 or PFC: Nameplate Capacity of retired equipment other than hermetically sealed-pressure switchgear. This data element is required. nameplateCapacityRetiringEquip DD DD0456 New hermetically sealed-pressure switchgear. This data element is required. newHermeticallySealed DD DD0457 New hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to 0. You must correct the current value before continuing. newHermeticallySealed DD DD0458 New equipment other than hermetically sealed-pressure switchgear. This data element is required. newEquipment DD DD0459 New equipment other than hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to 0. You must correct the current value before continuing. newEquipment DD DD0460 Retired hermetically sealed-pressure switchgear. This data element is required. retired DD DD0461 Retired hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to 0. You must correct the current value before continuing. retired DD DD0462 Retired equipment other than hermetically sealed-pressure switchgear. This data element is required. retiredEquipment DD DD0463 Retired equipment other than hermetically sealed-pressure switchgear. You must enter a value that is greater than or equal to 0. You must correct the current value before continuing. retiredEquipment DD DD0464 State(s) or territory in which the facility lies. This data element is required. tableData1 DD DD0465 Were missing data used for nameplate capacity of new hermetically-sealed pressure switchgear during the year? This data element is required. newEqMissing DD DD0466 New hermetically sealed-pressure switchgear. If missing data procedures were used for the nameplate capacity of new hermetically-sealed pressure switchgear, you must report the method used for estimating missing data. newEqReason DD DD0467 New hermetically sealed-pressure switchgear. If missing data procedures were used for the nameplate capacity of new equipment (including hermetically-sealed pressure switchgear), you must report the method used for estimating missing data. newEqMethod DD DD0468 Were missing data used for the nameplate capacity of retired hermetically-sealed pressure switchgear during the year? This data element is required. retiredEqMissing DD DD0469 Retired hermetically-sealed pressure switchgear. If missing data procedures were used for the nameplate capacity of retired hermetically-sealed pressure switchgear, you must provide a reason the data were missing. retiredEqReason DD DD0470 Retired hermetically-sealed pressure switchgear. If you used the missing data procedures for this data element, you must report the method used for estimating missing data. This data element is required. retiredEqMethod DD DD0480 SF6 or PFC: Nameplate Capacity of new hermetically sealed-pressure switchgear (pounds). This data element is required. nameplateCapacityNewLbs DD DD0482 SF6 or PFC: Nameplate Capacity of retired hermetically sealed-pressure switchgear (pounds). This data element is required. nameplateCapacityRetiringLbs DD DD0483 The result of beginning nameplate capacity plus net increase in total nameplate capacity is not greater than zero. Please check the values you entered and correct before continuing. nameplateCapacityNewLbs DD DD0497 GHGs are estimated for this facility. This data element is required. isGasReported DD DD1000 You have selected Subpart DD for reporting, but you have not yet uploaded a reporting form file. jctSubPartFacility E E001 Annual nitrous oxide emissions from adipic acid production. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName officialUnroundedN2o Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E004 You have not selected the methodology used to estimate emissions from this facility. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName subtype Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E005 Annual nitrous oxide emissions from adipic acid production that is sold or transferred off site. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualN2OTransferred Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E006 Annual nitrous oxide emissions from adipic acid production that is sold or transferred off site. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualN2OTransferred Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E009 The number of distinct abatement technologies. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfAbatement Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E010 The number of distinct abatement technologies. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfAbatement Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E012 Nonselective catalytic reduction (NSCR) was used as an abatement technology (Yes/No). This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName isNSCRUsed Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E013 Number of months a missing data procedure was used to measure adipic acid production. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfMonthsMissing Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E024 You have selected Subpart E for reporting, but you have not yet added a unit. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName groupUnit Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E025 You have not selected the methodology used to estimate emissions from this facility. This data element is required. Please make a selection, or click CANCEL. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName subtype Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E026 Name of administrator-approved alternative method. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName nameOfAltMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E027 Administrator-approved alternative method request date. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName altMethodReqDate Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E028 Administrator-approved alternative method request date. You can not have an approval date before a request date /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName altMethodReqDate Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E029 Administrator-approved alternative method approval date. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName altMethodaprDate Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E031 Method used for the performance test. This data element is required /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName methodForTest Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E032 Number of times that a performance test had to be repeated. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfTestRunsRepeated Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E033 Number of times that a performance test had to be repeated. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfTestRunsRepeated Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E053 "Other" abatement technologies were used. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName isOtherAbatementUsed Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E201 Date of installation of abatement technology. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName dtOfInstallation Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E E202 Is this a previously approved alternative method? This data element is required. Please make a selection, or click CANCEL. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName isPrevApprMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> E UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName E UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType EE CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML EE CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits EE CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml EE CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions EE CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs EE CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt EE CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow EE CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture EE CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow EE CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits EE CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions EE CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission EE CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission EE CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission EE CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission EE CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> EE CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 EE CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs EE CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt EE CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate EE CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate EE CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType EE CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate EE CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] EE CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] EE CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] EE CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] EE CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] EE CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] EE CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] EE CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] EE CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName EE CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted EE CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission EE CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission EE CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted EE CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions EE CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate EE CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate EE CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate EE CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate EE EE-EU-1 You have selected Subpart EE for reporting, but you have not yet added a unit. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName nounits Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE008 Annual consumption of Petroleum Coke. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualConsumptionOfPetroleumCoke Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE009 Annual consumption of Petroleum Coke. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualConsumptionOfPetroleumCoke Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE010 Annual production of Titanium Dioxide. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionOfTitaniumDioxide Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE011 Annual production of Titanium Dioxide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing.. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionOfTitaniumDioxide Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE012 Annual production capacity of Titanium Dioxide. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionCapacityOfTitaniumDioxide Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE013 Annual production capacity of Titanium Dioxide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionCapacityOfTitaniumDioxide Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE014 Annual production of carbon-containing waste. This data element is required. Enter 0 if your facility does not produce carbon-containing waste. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionOfCarbonContainingWaste Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE015 Annual production of carbon-containing waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionOfCarbonContainingWaste Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE016 Total number of chloride process lines not monitored by CEMS. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfNonCemsProcessLines Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE021 Unique Name Identifier. This data element is required. Please enter a name or identifier or click CANCEL. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName unitNameIdentifier Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE022 Annual production of Carbon-Containing Waste. This data element is required. Enter 0 if your facility does not produce carbon-containing waste. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionOfCarbonContainingWaste Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE023 Carbon content of Carbon-Containing Waste. This data element is required. Enter 0 if your facility does not produce carbon-containing waste. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName carbonContentOfCarbonContainingWaste Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE024 Number of months missing data procedures were used to determine monthly generation of Carbon-Containing Waste. This data element is required. Enter 0 if your facility does not produce carbon-containing waste. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfMonthsMissingData Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE025 Annual consumption of Petroleum Coke. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualConsumptionOfPetroleumCoke Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE026 Annual production capacity of Titanium Dioxide. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionCapacityOfTitaniumDioxide Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE028 Titanium Dioxide production for January. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production1.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE029 Test method used in January to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production1.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE030 Titanium Dioxide production for February. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production2.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE031 Test method used in February to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production2.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE032 Titanium Dioxide production for March. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production3.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE033 Test method used in March to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production3.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE034 Titanium Dioxide production for April. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production4.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE035 Test method used in April to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production4.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE036 Titanium Dioxide production for May. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production5.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE037 Test method used in May to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production5.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE038 Titanium Dioxide production for June. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production6.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE039 Test method used in June to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production6.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE040 Titanium Dioxide production for July. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production7.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE041 Test method used in July to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production7.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE042 Titanium Dioxide production for August. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production8.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE043 Test method used in August to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production8.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE044 Titanium Dioxide production for September. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production9.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE045 Test method used in September to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production9.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE046 Titanium Dioxide production for October. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production10.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE047 Test method used in October to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production10.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE048 Annual total Titanium Dioxide production. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualTitaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE049 Sampling analysis result of Carbon Content of Petroleum Coke as determined for QA/QC of supplier data under 98.314(d). This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName samplingAnalysisResult Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE050 Annual production of Carbon-Containing Waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionOfCarbonContainingWaste Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE051 Carbon content of Carbon-Containing Waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName carbonContentOfCarbonContainingWaste Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE052 Carbon content of Carbon-Containing Waste. You must enter a value that is between 0 and 1. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName carbonContentOfCarbonContainingWaste Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE053 Number of months missing data procedures were used to determine monthly generation of Carbon-Containing Waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfMonthsMissingData Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE054 Number of months missing data procedures were used to determine monthly generation of Carbon-Containing Waste. You must enter a value that is between 0 and 12. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName numberOfMonthsMissingData Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE055 Annual consumption of Petroleum Coke. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualConsumptionOfPetroleumCoke Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE056 Annual production capacity of Titanium Dioxide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualProductionCapacityOfTitaniumDioxide Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE058 Titanium Dioxide production for January. You must enter a value that is greater than zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production1.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE059 Titanium Dioxide production for February. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production2.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE060 Titanium Dioxide production for March. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production3.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE061 Titanium Dioxide production for April. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production4.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE062 Titanium Dioxide production for May. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production5.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE063 Titanium Dioxide production for June. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production6.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE064 Titanium Dioxide production for July. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production7.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE065 Titanium Dioxide production for August. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production8.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE066 Titanium Dioxide production for September. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production9.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE067 Titanium Dioxide production for October. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production10.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE068 Titanium Dioxide production for November. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production11.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE069 Titanium Dioxide production for December. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production12.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE070 Annual total Titanium Dioxide production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualTitaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE071 Unique Name Identifier. This data element is required. Please enter a name or identifier or click CANCEL. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName unitNameIdentifier Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE072 Sampling analysis result of Carbon Content of Petroleum Coke as determined for QA/QC of supplier data under 98.314(d). This data element value must be between 0 and 1, expressed as a decimal fraction only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName samplingAnalysisResult Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE101 Total Number of Process Lines. You must add at least one process line. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName transientData['totalNumberOfProcessLines'] Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE106 Titanium Dioxide production for November. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production11.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE107 Test method used in November to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production11.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE108 Titanium Dioxide production for December. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production12.titaniumDioxideProduction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> EE EE109 Test method used in December to determine carbon content of petroleum coke consumed. This data element must be either \'Supplier Records\', \'ASTM D3176-89\', or \'ASTM D5373-08\' only. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName monthlyTiO2Production12.testMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F701 You have added Subpart F, but have not specified the type of smelter technology used. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName smelterTech Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F714 Method used to measure the frequency and duration of anode effects (or overvoltage). This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName methodUsed Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F715 Number of months in the reporting year that missing data procedures were followed to measure the anode effect overvoltage emission factor (i.e., potline overvoltage and/or current efficiencies). Enter 0 (zero) if missing data procedures were not used. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName overvoltageMM Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F716 Number of months in the reporting year that missing data procedures were followed to measure the anode effect overvoltage emission factor (i.e., potline overvoltage and/or current efficiencies). This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName overvoltageMM Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F717 Number of months in the reporting year that missing data procedures were followed to measure the anode effect minutes per cell day (i.e., anode effect frequency and/or anode effect duration). Enter 0 (zero) if missing data procedures were not used. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName minutesCellDayMM Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F718 Number of months in the reporting year that missing data procedures were followed to measure the anode effect minutes per cell day (i.e., anode effect frequency and/or anode effect duration). This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName minutesCellDayMM Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F719 Number of months in the reporting year that missing data procedures were followed to measure the anode consumption. Enter 0 (zero) if missing data procedures were not used. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName anodeConsumptionMM Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F720 Number of months in the reporting year that missing data procedures were followed to measure the anode consumption. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName anodeConsumptionMM Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F721 Number of months in the reporting year that missing data procedures were followed to measure the anode paste consumption. Enter 0 (zero) if missing data procedures were not used. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName anodePasteMM Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F722 Number of months in the reporting year that missing data procedures were followed to measure the anode paste consumption. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName anodePasteMM Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F723 You have selected Subpart F for reporting, but you have not yet added a smelter or potline. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName groupUnit Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F726 Annual Anode effect minutes per cell-day. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName aeMinutes Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F727 Annual Anode effect minutes per cell-day. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName aeMinutes Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F729 Annual anode effect frequency. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName aeFrequency Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F732 Enter Own Result for Annual CF4 (perfluoromethane) mass emissions. This data element is required if you select Enter/Report Alternate Result. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName officialUnroundedCf4 Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F733 Enter Own Result for Annual C2F6 (perfluoroethane) mass emissions. This data element is required if you select Enter/Report Alternate Result. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName officialUnroundedC2f6 Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F735 Annual anode effect overvoltage. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName aeOvervoltageFactor Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F736 Annual anode effect overvoltage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName aeOvervoltageFactor Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F737 Annual potline overvoltage. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName avgPotlineOvervoltage Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F738 Annual potline overvoltage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName avgPotlineOvervoltage Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F739 Current efficiency. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName avgCurrentEfficiency Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F740 Current efficiency. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName avgCurrentEfficiency Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F741 Smelter-specific slope coefficient (or overvoltage emission factor). This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName smelterSlopeCoefficient Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F742 Smelter-specific slope coefficient (or overvoltage emission factor). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName smelterSlopeCoefficient Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F744 Annual anode effect frequency. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName aeFrequency Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F746 Annual anode effect duration. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName aeDuration Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F747 Annual anode effect duration. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName aeDuration Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F750 Smelter technology. You must select a value from the listed options before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName smelterTech Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F751 Method used for estimating PFC emissions. You must select a value from the listed options before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName methodUsedForPFC Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F780 The last date when the smelter-specific slope coefficients were measured. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName lasteDateMeasured Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F783 Annual Anode Consumption. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualAnodeConsumption Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F784 Annual Anode Consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualAnodeConsumption Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F785 Annual paste consumption. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualAnodePasteConsumption Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F F786 Annual paste consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualAnodePasteConsumption Subpart D must include at least one <UnitsCDetails> node with a <UnitName> F UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName F UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType FF ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] FF ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] FF FF0001 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. This data element is located on tab 1, in column A2, and in row 30. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName ghgrpId Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0001A You have not uploaded a reporting form file. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName jctSubPartFacility Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0001B Filename %file_name included in the Subpart FF reporting form, 4. Ventilation Quarterly tab has not been uploaded. File names cited in the reporting form should include file extension type (e.g., .xls, .xlsx, .doc, .docx, .png, .txt, .csv, .accdb, .mdb). Please return to the Subpart FF overview page to upload the cited MSHA report file or correct the file name listed on tab 4 in column A33. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName none Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0002 Reporting Period. This data element is required and must be equal to the expected reporting year. This data element is located on tab 1, in column A2, and in row 31. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName reportingPeriod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0006 Quarter(s) [{1}]: Quarterly CO2 emissions from onsite destruction of coal mine gas CH4, where the gas is not a fuel input for energy generation or use (e.g., flaring). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. This data element is located on tab 1 in column B3, and in row 37. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName transientData['qrtCO2'] Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0023 Degasification Gas Collection System Unit ID or Name. This data element is required only if a degasification system is used. Leave this field blank if the facility does not have a degasification system. This data element is located on tab 2 in column A1. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName degasCollectionSystemUnitID Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0028 The same name or Gas Collection System Unit ID already exists. Please enter a unique name or identifier. This data element is located on tab 2 in column A1. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName degasCollectionSystemUnitID Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0036 Identify if this is a well or a shaft. This data element is required. This data element is located on tab 3 in column A2. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName isThisWellorShaft Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0039 Indicate whether the well or shaft is monitored individually, or as part of a centralized monitoring point. This data element is required. This data element is located on tab 3 in column A9. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName wellShaftMonitoredStatus Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0040 Identify the Centralized Monitoring Point. This data element is required. This data element is located on tab 3 in column A10. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName centralizedMonitoringPointID Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0041 Degasification Gas Collection System Unit ID or Name. This data element is required. This data element is located on tab 3 in column A3. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName gasSystemUnitID Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0050 Method used for flow rate. This data element is required. This data element is located on tab 4 in column A5. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName methodforFlowRate Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0086 Quarterly CH4 concentration. This data element is required. This data element is located on tab 4 in column A14. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName quarterlyCH4ConcentrationUsedInEquation Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0087 Temperature used in Eq. FF-1. This data element is required. If a flow meter that automatically corrects to 520 degrees Rankine was used, enter 520. This data element is located on Tab 4 in column A22. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName temperatureUsedInEquation Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0088 Pressure used in Eq. FF-1. This data element is required. If a flow meter that automatically corrects to 1 atm was used or if you used MSHA-provided data of actual methane flow, please enter 1. This data element is located on tab 4 in column A24. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName pressureUsedInEquation Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0090 Quarterly volumetric flow rate used in Eq. FF-1. This data element is required. This data element is located on tab 4 in column A6. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName quarterlyVolumetricFlowRateUsedInEquation Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0091 Gaseous organic concentration correction factor used in Eq. FF-9. This data element is required if you indicated that Eq. FF-9 is required to calculate CH4 concentration. This data element is located on tab 4 in column A16. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName gaseousOrganicConcentrationCorrectionFactor Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0098 Degasification Gas Collection System Monitoring Point. This data element is required only if a degasification system is used. Leave this field blank if the facility does not have a degasification system. This data element is located on tab 5 in column A1. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName deGasPointId Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0106 Method used for concentration. This data element is required if a degasification system is used. Leave this field blank if the facility does not have a degasification system. This data element is located on tab 5 in column A5. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName methodforDeGasConc Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0107 Quarterly CEMS CH4 concentration used to calculate CH4 liberated from degasification systems. This data element is required if the method used for concentration is Monitored using 98.324(c)(1). This data element is located on Tab 5 in column A6. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName quarterlyCH4Conc Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0120 Gaseous organic concentration correction factor used in Eq. FF-9. This data element is required if Eq. FF-9 is required to calculate CH4 concentration. If Eq. FF-9 was not required, please change column A12 to \'No\' and leave this cell blank. This data element is located on tab 5 in column A13. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName gaseousOrganicConcentrationCorrectionFactor Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0121 Temperature used in Eq. FF-3. This data element is required. If a flow meter that automatically corrects to 520 degrees Rankine was used, enter 520. This data element is located on Tab 5 in column A14. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName temperatureUsedInEquation Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0122 Pressure used in Eq. FF-3. This data element is required. If a flow meter that automatically corrects to 1 atm was used, enter 1. This data element is located on tab 5 in column A16. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName pressureUsedInEq Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0124 Was Eq. FF-9 required to calculate CH4 concentration?. This data element requires a yes or no response. This data element is located on tab 5 in column A12. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName equationRequiredToCalculateCH4Concentration Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0134 Degasification Gas Collection System Monitoring Point. This data element is required if a degasification system is in use. This data element is located on tab 6 in column A1. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName deGasWeeklyPointId Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0137 Method used for flow rate. This data element is required if a Degasification Gas Collection System Monitoring Point is listed. This data element is located on tab 6 in column A4. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName deGasWeeklyFlowrateMethod Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0140 Weekly volumetric flow rate used to calculate CH4 liberated from degasification systems, used in Eq. FF-3. This data element is required if a Degasification Gas Collection System Monitoring Point is listed. This data element is located on tab 6 in column A5. Error Location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName weeklyVolumetricFlowRate Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0147 Weekly CH4 liberated from the monitoring point (output of Eq. FF-3). This data element is required. This data element is located on tab 6 in column A10. Error Location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName weeklyCH4LiberatedFromAtTheMonitoringPoint Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0148 Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name. This data element is required. This data element is located on tab 7 in column A1. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName destructionDeviceID Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0149 Reporting destruction in a destruction device or offsite transport. This data element is required. This data element is located in the reporting form on Tab 7 in Column A2. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName reportingDestructionOnSiteorOffsite Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0150 Description of the Device. This data element is required. This data element is located on tab 7 in column A3. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName deviceDescription Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0151 Additional Information for Description. This data element is required. Data element located on tab 7 in column A4. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName additionalDescription Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0152 Indicate if a back-up destruction device (or devices) is present at the mine. This data element is required. This data element is located on tab 7 in column A5. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName backupDestructionDevicePresence Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0153 Annual operating hours of the primary destruction device, hours. This data element is required. This data element is located on tab 7 in column A6. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualOperatingHoursDestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0154 Annual operating hours of the primary destruction device, hours. This data element is required. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A6. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualOperatingHoursDestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0155 Annual operating hours of back-up destruction device Number 1. This data element is required. This data element is located on tab 7 in column A8. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualOperatingHoursBackup1DestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0156 Annual operating hours of back-up destruction device Number 1. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A8. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName annualOperatingHoursBackup1DestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0158 If gas is transported offsite, is the gas destroyed offsite? This data element is required. This data element is located on tab 7 in column A12. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName gasDestroyedOffsiteInd Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0159 Destruction efficiency assumed for primary destruction device and used in Eq. FF-5. This data element is required. This data element is located on tab 7 in column A7. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName destructionEfficiencyAssumedForPrimaryDestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0160 Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device (1 of 10). This data element is required. This data element is located on tab 7 in column A13. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName individualWellShaftAssociatedWithOffsiteTransport1 Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0161 Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5. This data element is required if you indicated a back-up destruction device is present at the mine. This data element is located on tab 7 in column A9. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName destructionEfficiencyAssumedForBackUp1DestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0166 Destruction efficiency assumed for back-up destruction device Number 2 and used in Eq. FF-5. This value should be within the range of 0 to 100. The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A11. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName destructionEfficiencyAssumedForBackUp2DestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0167 Destruction efficiency assumed for back-up destruction device Number 1 and used in Eq. FF-5. This value should be within the range of 0 to 100. The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A9. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName destructionEfficiencyAssumedForBackUp1DestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0168 Destruction efficiency assumed for primary destruction device and used in Eq. FF-5. This value should be within the range of 0 to 100. The value you provided is outside that range. You must correct the current value before continuing. This data element is located on tab 7 in column A7. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName destructionEfficiencyAssumedForPrimaryDestructionDevice Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0178 Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name. If no ventilation and degasification system destruction device or point of offsite transport exist, please leave column this table blank. This data element is located on Tab 8 in column A1. Error Location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName quarterlyDestructionDeviceID Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0179 Quarterly CH4 destroyed onsite. This data element is required if you indicated in the destruction or offsite tab that gas is destroyed at the mine. This data element is located on tab 8 in column A3. Error Location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName quarterlyCH4DestroyedOnsite Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0180 Quarterly CH4 transported offsite. This data element is required if you indicated in the destruction or offsite tab that gas is transported offsite. This data element is located on tab 8 in column A4. Error Location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName quarterlyCH4TransportedOffsite Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0183 Weekly volumetric flow rate used to calculate CH4 destruction. This data element is required if you are destroying gas at the mine or transporting it offsite. This data element is located on tab 9 in column A4. Error Location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName weeklyVolumetricFlowRateUsedToCalculateCH4Destruction Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0184 Ventilation and degasification system destruction device or point of offsite transport Unit ID or Name. This data element is required. This data element is located on Tab 9 in column A1. Error Location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName weeklyDestructionDeviceID Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0193 Weekly CH4 concentration used to calculate CH4 flow. This data element is required if you are destroying gas at the mine or transporting it offsite. This data element is located on tab 9 in column A7. Error Location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName weeklyCH4Concentration Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0198 Quarter(s) [{1}] : Facility total quarterly CH4 destroyed at the mine and transported offsite (CH4DestroyedTotal). This data element is required. This data element is on tab 10 in column C4. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName totalQuarterlyCH4DestroyedAndTransportedOffsite Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0199 Quarter(s) [{1}] : Facility total quarterly CH4 liberated from all degasification monitoring points (CH4DTotal). This data element is required. This data element is on tab 10 in column B4. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName totalQuarterlyCH4LiberatedFromDegasificationMonitoringPoints Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0200 Quarter(s) [{1}] : Facility total quarterly CH4 liberated from ventilation systems (CH4VTotal). This data element is required. This data element is on tab 10 in column A4. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName totalQuarterlyCH4LiberatedFromVentilationSystems Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0201 Quarter(s) [{1}] : What result do you want to report to EPA? This data element is required. This data element is located on tab 10 in column A3. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName resultReportedToEPAVentilationSystems Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0202 Quarter(s) [{1}] : What result do you want to report to EPA? This data element is required. This data element is located on tab 10 in column B3. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName resultReportedToEPADegasificationMonitoringPoints Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0203 Quarter(s) [{1}] : What result do you want to report to EPA? This data element is required. This data element is located on tab 10 in column C3. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName resultReportedToEPATransportedOffsite Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0206 Quarter(s) [{1}] : Facility total quarterly CH4 liberated from ventilation systems (CH4VTotal). This data element is required. This data element is on tab 10 in column A5. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName ventilationSystemsReportedValue Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0207 Quarter(s) [{1}] : Facility total quarterly CH4 liberated from all degasification monitoring points (CH4DTotal). This data element is required. This data element is on tab 10 in column B5. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName degasificationMonitoringPointsReportedValue Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0208 Quarter(s) [{1}] : Facility total quarterly CH4 destroyed at the mine and transported offsite (CH4DDestroyedTotal). This data element is required. This data element is on tab 10 in column C5. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName transportedOffsiteReportedValue Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0216 Quarter(s) [{1}] : Facility total quarterly net CH4 emissions to the atmosphere from the mine according to Eq. FF-7(MT CH4, rounded). The quantity destroyed cannot exceed the quantity liberated. Please double check this value and revise this result. This data element is on tab 10 in column D5. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName facilityTotalQuarterlyNetCH4Emissions Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0219 Individual well, shaft, or centralized monitoring point associated with the offsite transport or destruction device. Each destruction device may have up to 10 discrete wells/shafts associated with it, but they must all be different. This data element is on tab 7 in columns A13 through A22 /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName individualWellShaftAssociatedWithOffsiteTransport1 Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0221 Start date of well or shaft. This data element is required. This data element is located on tab 3 in column A6. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName wellShaftStartDate Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0222 End date of well or shaft. This data element is required. This data element is located on tab 3 in column A7. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName wellShaftEndDate Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0223 Number of days the well or shaft was in operation during the reporting year. This data element is required. This data element is located on tab 3 in column A8. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName wellShaftDaysInOperation Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0224 Was a flow meter used? This data element is required. This data element is located on tab 4 in column A27. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName wasFlowMeterUsed Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0225 File name of MSHA report used to report quarterly CH4 concentration and volumetric flow rate. This data element is required. This data element is located on tab 4 in column A33. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName fileNameMSHAReportUsed Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0226 Were the Weekly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? This data element is required. This data element is located on Tab 5 in column A18. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName wereQuarterlyVentilationFlowRateMeasured Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0227 Was a flow meter used? This data element is required. This data element is located on Tab 5 in column A19. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName wasFlowMeterUsed Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0230 Moisture content used in Eq. FF-1. This data element is required when volumetric flow and CH4 concentration are measured on a different basis and and a flow meter is used but does not automatically correct for moisture content. This data element is located on tab 4 in column A28. If reported, the expected range for moisture content is between 0.0 and 0.1. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName moistureContentUsedInEquation Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0231 Quarterly CH4 liberated (CH4V - output of Eq. FF-1). This data element is required. This data element is located on tab 4 in column A32. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName quarterlyCH4LiberatedFromVentilationMonitoringPoint Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0233 Required CH4 concentration from sampling. This data element is required if Method used for concentration selected is Monitored using 98.324(c)(2). This data element is located on Tab 5 in column A10. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName quarterlyCH4ConcentrationWeekly Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0234 Moisture content used in Eq. FF-3. This data element is required when the weekly volumetric flow rate and the quarterly CH4 concentration are measured on a different basis and when a flow meter does not automatically correct for moisture content. This data element is located on tab 5 in column A20. The expected range for moisture content is between 0.0 and 0.1. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName moistureContentUsedInEq Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0235 Moisture correction factor used in Eq. FF-1. This data element is required. If you used MSHA-provided data of actual methane flow, if the flow rate and concentration are measured on the same wet/wet or dry/dry basis, or if a flow meter was used and automatically corrected for moisture content enter 1 for moisture correction factor. This data element is located on tab 4 in column A30. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName moistureCorrectionFactor Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0236 Moisture correction factor used in Eq. FF-3. This data element is required. If the flow rate and concentration are measured on the same wet/wet or dry/dry basis or if a flow meter was used and automatically corrected for moisture content enter 1 for moisture correction factor. This data element is located in the reporting form on tab 5 in column A22. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName moistureCorrectionFactor Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0239 Were the Quarterly Ventilation Flow Rate and Quarterly CH4 Concentration measured on the same basis? This data element is required. This data element is located on tab 4 in column A26. Error location(s) [{1}] /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName wereQuarterlyVentilationFlowRateMeasured Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0240 Start and stop dates where degasification of mining operations is taking place. These are required data elements. The data elements can be found on Tab 5 columns A3 and A4. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName deGasPointId Subpart D must include at least one <UnitsCDetails> node with a <UnitName> FF FF0244 Start and/or stop dates for CH4 liberated by ventilation monitoring points were not reported. Start and stop dates for ventilation monitoring points are required data elements. The data elements can be found on Tab 4 columns A3 and A4. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPartC/ UnitsCDetails/UnitIdentification/UnitName activeVentilationStartDate Subpart D must include at least one <UnitsCDetails> node with a <UnitName> G ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] G ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] G CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML G CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits G CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml G CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions G CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs G CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt G CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow G CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture G CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow G CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits G CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions G CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission G CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission G CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission G CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission G CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> G CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 G CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs G CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt G CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate G CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate G CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType G CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate G CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] G CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] G CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] G CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] G CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] G CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] G CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] G CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] G CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName G CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted G CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission G CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission G CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted G CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions G CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate G CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate G CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate G CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate G G-EU-1 You have selected Subpart G for reporting, but you have not yet added a unit. nounits G G001 Annual urea production. This data element is required. annualUreaProduction G G002 Annual urea production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualUreaProduction G G004 Method used to determine urea production. This data element is required. ureaCalculationMethod G G005 Method used to determine urea production. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ureaCalculationMethodDesc G G006 Quantity of CO2 used to produce urea from the steam reforming of a hydrocarbon or the gasification of solid and liquid raw material. This data element is required. You may enter zero if your facility does not produce urea. co2ConsumedForUrea G G007 Quantity of CO2 used to produce urea from the steam reforming of a hydrocarbon or the gasification of solid and liquid raw material. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2ConsumedForUrea G G009 Method used to determine the quantity of CO2 used to produce urea. This data element is required. co2CalculationForUreaMethod G G010 Method used to determine the quantity of CO2 used to produce urea. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. co2CalculationForUreaMethodDesc G G011 Please make a selection or click CANCEL. hasCEMS G G012 Type of feedstock used by this unit. This data element is required. Please make a selection or click CANCEL. feedStockType G G015 Method used to determine feedstock mass for January. This data element is required. quantityMap['January'].feedStockQuantityMethod G G016 Method used to determine feedstock mass for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['January'].otherFeedStockMethodDesc G G017 Method used to determine feedstock mass for February. This data element is required. quantityMap['February'].feedStockQuantityMethod G G018 Method used to determine feedstock mass for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['February'].otherFeedStockMethodDesc G G019 Method used to determine feedstock mass for March. This data element is required. quantityMap['March'].feedStockQuantityMethod G G020 Method used to determine feedstock mass for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['March'].otherFeedStockMethodDesc G G021 Method used to determine feedstock mass for April. This data element is required. quantityMap['April'].feedStockQuantityMethod G G022 Method used to determine feedstock mass for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['April'].otherFeedStockMethodDesc G G023 Method used to determine feedstock mass for May. This data element is required. quantityMap['May'].feedStockQuantityMethod G G024 Method used to determine feedstock mass for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['May'].otherFeedStockMethodDesc G G025 Method used to determine feedstock mass for June. This data element is required. quantityMap['June'].feedStockQuantityMethod G G026 Method used to determine feedstock mass for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['June'].otherFeedStockMethodDesc G G027 Method used to determine feedstock mass for July. This data element is required. quantityMap['July'].feedStockQuantityMethod G G028 Method used to determine feedstock mass for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['July'].otherFeedStockMethodDesc G G029 Method used to determine feedstock mass for August. This data element is required. quantityMap['August'].feedStockQuantityMethod G G030 Method used to determine feedstock mass for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['August'].otherFeedStockMethodDesc G G031 Method used to determine feedstock mass for September. This data element is required. quantityMap['September'].feedStockQuantityMethod G G032 Method used to determine feedstock mass for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['September'].otherFeedStockMethodDesc G G033 Method used to determine feedstock mass for October. This data element is required. quantityMap['October'].feedStockQuantityMethod G G034 Method used to determine feedstock mass for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['October'].otherFeedStockMethodDesc G G035 Method used to determine feedstock mass for November. This data element is required. quantityMap['November'].feedStockQuantityMethod G G036 Method used to determine feedstock mass for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['November'].otherFeedStockMethodDesc G G037 Method used to determine feedstock mass for December. This data element is required. quantityMap['December'].feedStockQuantityMethod G G038 Method used to determine feedstock mass for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['December'].otherFeedStockMethodDesc G G039 Basis for the solid feedstock carbon content for January. This data element is required. ccMap['January'].carbonContentBasis G G040 Basis for the solid feedstock carbon content for February. This data element is required. ccMap['February'].carbonContentBasis G G041 Basis for the solid feedstock carbon content for March. This data element is required. ccMap['March'].carbonContentBasis G G042 Basis for the solid feedstock carbon content for April. This data element is required. ccMap['April'].carbonContentBasis G G043 Basis for the solid feedstock carbon content for May. This data element is required. ccMap['May'].carbonContentBasis G G044 Basis for the solid feedstock carbon content for June. This data element is required. ccMap['June'].carbonContentBasis G G045 Basis for the solid feedstock carbon content for July. This data element is required. ccMap['July'].carbonContentBasis G G046 Basis for the solid feedstock carbon content for August. This data element is required. ccMap['August'].carbonContentBasis G G047 Basis for the solid feedstock carbon content for September. This data element is required. ccMap['September'].carbonContentBasis G G048 Basis for the solid feedstock carbon content for October. This data element is required. ccMap['October'].carbonContentBasis G G049 Basis for the solid feedstock carbon content for November. This data element is required. ccMap['November'].carbonContentBasis G G050 Basis for the solid feedstock carbon content for December. This data element is required. ccMap['December'].carbonContentBasis G G051 Method used to determine feedstock volume for January. This data element is required. quantityMap['January'].feedStockQuantityMethod G G052 Method used to determine feedstock volume for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['January'].otherFeedStockMethodDesc G G053 Method used to determine feedstock volume for February. This data element is required. quantityMap['February'].feedStockQuantityMethod G G054 Method used to determine feedstock volume for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['February'].otherFeedStockMethodDesc G G055 Method used to determine feedstock volume for March. This data element is required. quantityMap['March'].feedStockQuantityMethod G G056 Method used to determine feedstock volume for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['March'].otherFeedStockMethodDesc G G057 Method used to determine feedstock volume for April. This data element is required. quantityMap['April'].feedStockQuantityMethod G G058 Method used to determine feedstock volume for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['April'].otherFeedStockMethodDesc G G059 Method used to determine feedstock volume for May. This data element is required. quantityMap['May'].feedStockQuantityMethod G G060 Method used to determine feedstock volume for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['May'].otherFeedStockMethodDesc G G061 Method used to determine feedstock volume for June. This data element is required. quantityMap['June'].feedStockQuantityMethod G G062 Method used to determine feedstock volume for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['June'].otherFeedStockMethodDesc G G063 Method used to determine feedstock volume for July. This data element is required. quantityMap['July'].feedStockQuantityMethod G G064 Method used to determine feedstock volume for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['July'].otherFeedStockMethodDesc G G065 Method used to determine feedstock volume for August. This data element is required. quantityMap['August'].feedStockQuantityMethod G G066 Method used to determine feedstock volume for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['August'].otherFeedStockMethodDesc G G067 Method used to determine feedstock volume for September. This data element is required. quantityMap['September'].feedStockQuantityMethod G G068 Method used to determine feedstock volume for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['September'].otherFeedStockMethodDesc G G069 Method used to determine feedstock volume for October. This data element is required. quantityMap['October'].feedStockQuantityMethod G G070 Method used to determine feedstock volume for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['October'].otherFeedStockMethodDesc G G071 Method used to determine feedstock volume for November. This data element is required. quantityMap['November'].feedStockQuantityMethod G G072 Method used to determine feedstock volume for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['November'].otherFeedStockMethodDesc G G073 Method used to determine feedstock volume for December. This data element is required. quantityMap['December'].feedStockQuantityMethod G G074 Method used to determine feedstock volume for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['December'].otherFeedStockMethodDesc G G075 Basis for the liquid feedstock carbon content for January. This data element is required. ccMap['January'].carbonContentBasis G G076 Basis for the liquid feedstock carbon content for February. This data element is required. ccMap['February'].carbonContentBasis G G077 Basis for the liquid feedstock carbon content for March. This data element is required. ccMap['March'].carbonContentBasis G G078 Basis for the liquid feedstock carbon content for April. This data element is required. ccMap['April'].carbonContentBasis G G079 Basis for the liquid feedstock carbon content for May. This data element is required. ccMap['May'].carbonContentBasis G G080 Basis for the liquid feedstock carbon content for June. This data element is required. ccMap['June'].carbonContentBasis G G081 Basis for the liquid feedstock carbon content for July. This data element is required. ccMap['July'].carbonContentBasis G G082 Basis for the liquid feedstock carbon content for August. This data element is required. ccMap['August'].carbonContentBasis G G083 Basis for the liquid feedstock carbon content for September. This data element is required. ccMap['September'].carbonContentBasis G G084 Basis for the liquid feedstock carbon content for October. This data element is required. ccMap['October'].carbonContentBasis G G085 Basis for the liquid feedstock carbon content for November. This data element is required. ccMap['November'].carbonContentBasis G G086 Basis for the liquid feedstock carbon content for December. This data element is required. ccMap['December'].carbonContentBasis G G087 Method used to determine feedstock volume for January. This data element is required. quantityMap['January'].feedStockQuantityMethod G G088 Method used to determine feedstock volume for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['January'].otherFeedStockMethodDesc G G089 Method used to determine feedstock volume for February. This data element is required. quantityMap['February'].feedStockQuantityMethod G G090 Method used to determine feedstock volume for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['February'].otherFeedStockMethodDesc G G091 Method used to determine feedstock volume for March. This data element is required. quantityMap['March'].feedStockQuantityMethod G G092 Method used to determine feedstock volume for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['March'].otherFeedStockMethodDesc G G093 Method used to determine feedstock volume for April. This data element is required. quantityMap['April'].feedStockQuantityMethod G G094 Method used to determine feedstock volume for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['April'].otherFeedStockMethodDesc G G095 Method used to determine feedstock volume for May. This data element is required. quantityMap['May'].feedStockQuantityMethod G G096 Method used to determine feedstock volume for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['May'].otherFeedStockMethodDesc G G097 Method used to determine feedstock volume for June. This data element is required. quantityMap['June'].feedStockQuantityMethod G G098 Method used to determine feedstock volume for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['June'].otherFeedStockMethodDesc G G099 Method used to determine feedstock volume for July. This data element is required. quantityMap['July'].feedStockQuantityMethod G G100 Method used to determine feedstock volume for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['July'].otherFeedStockMethodDesc G G101 Method used to determine feedstock volume for August. This data element is required. quantityMap['August'].feedStockQuantityMethod G G102 Method used to determine feedstock volume for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['August'].otherFeedStockMethodDesc G G103 Method used to determine feedstock volume for September. This data element is required. quantityMap['September'].feedStockQuantityMethod G G104 Method used to determine feedstock volume for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['September'].otherFeedStockMethodDesc G G105 Method used to determine feedstock volume for October. This data element is required. quantityMap['October'].feedStockQuantityMethod G G106 Method used to determine feedstock volume for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['October'].otherFeedStockMethodDesc G G107 Method used to determine feedstock volume for November. This data element is required. quantityMap['November'].feedStockQuantityMethod G G108 Method used to determine feedstock volume for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['November'].otherFeedStockMethodDesc G G109 Method used to determine feedstock volume for December. This data element is required. quantityMap['December'].feedStockQuantityMethod G G110 Method used to determine feedstock volume for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. quantityMap['December'].otherFeedStockMethodDesc G G111 Basis for the gaseous feedstock carbon content for January. This data element is required. ccMap['January'].carbonContentBasis G G112 Basis for the gaseous feedstock carbon content for February. This data element is required. ccMap['February'].carbonContentBasis G G113 Basis for the gaseous feedstock carbon content for March. This data element is required. ccMap['March'].carbonContentBasis G G114 Basis for the gaseous feedstock carbon content for April. This data element is required. ccMap['April'].carbonContentBasis G G115 Basis for the gaseous feedstock carbon content for May. This data element is required. ccMap['May'].carbonContentBasis G G116 Basis for the gaseous feedstock carbon content for June. This data element is required. ccMap['June'].carbonContentBasis G G117 Basis for the gaseous feedstock carbon content for July. This data element is required. ccMap['July'].carbonContentBasis G G118 Basis for the gaseous feedstock carbon content for August. This data element is required. ccMap['August'].carbonContentBasis G G119 Basis for the gaseous feedstock carbon content for September. This data element is required. ccMap['September'].carbonContentBasis G G120 Basis for the gaseous feedstock carbon content for October. This data element is required. ccMap['October'].carbonContentBasis G G121 Basis for the gaseous feedstock carbon content for November. This data element is required. ccMap['November'].carbonContentBasis G G122 Basis for the gaseous feedstock carbon content for December. This data element is required. ccMap['December'].carbonContentBasis G G123 Measured carbon content from sample analysis for solid feedstock. This data element is required. carbonContentMeasured G G124 Measured carbon content from sample analysis for solid feedstock. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContentMeasured G G125 Measured carbon content from sample analysis for solid feedstock. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (kg C per kg of feedstock). The value you provided is outside that range. You must correct the current value before continuing. carbonContentMeasured G G127 Measured carbon content from sample analysis for liquid feedstock. This data element is required. carbonContentMeasured G G128 Measured carbon content from sample analysis for liquid feedstock. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (kg C per kg of feedstock). The value you provided is outside that range. You must correct the current value before continuing. carbonContentMeasured G G129 Measured carbon content from sample analysis for liquid feedstock. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContentMeasured G G130 Measured carbon content from sample analysis for gaseous feedstock. This data element is required. carbonContentMeasured G G131 Measured carbon content from sample analysis for gaseous feedstock. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContentMeasured G G132 Measured carbon content from sample analysis for gaseous feedstock. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (kg C per kg of feedstock). The value you provided is outside that range. You must correct the current value before continuing. carbonContentMeasured G G137 Method used to determine the gaseous feedstock quantity. This data element is required. gaseousFeedStockQuantityMethod G G138 Method used to determine the liquid feedstock quantity. This data element is required. liquidFeedStockQuantityMethod G G139 Method used to determine the solid feedstock quantity. This data element is required. solidFeedStockQuantityMethod G G140 Gaseous feedstock quantity. This data element is required. gaseousFeedStockQuantity G G141 Liquid feedstock quantity. This data element is required. liquidFeedStockQuantity G G142 Solid feedstock quantity. This data element is required. solidFeedStockQuantity G G143 Method used to determine the gaseous feedstock quantity. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherGaseousFeedStockQuantityMethod G G144 Method used to determine the liquid feedstock quantity. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherLiquidFeedStockQuantityMethod G G145 Method used to determine the solid feedstock quantity. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherSolidFeedStockQuantityMethod G UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName G UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType GG CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML GG CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits GG CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml GG CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions GG CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs GG CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt GG CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow GG CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture GG CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow GG CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits GG CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions GG CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission GG CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission GG CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission GG CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission GG CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> GG CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 GG CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs GG CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt GG CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate GG CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate GG CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType GG CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate GG CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] GG CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] GG CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] GG CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] GG CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] GG CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] GG CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] GG CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] GG CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName GG CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted GG CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission GG CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission GG CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted GG CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions GG CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate GG CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate GG CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate GG CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate GG GG-EU-1 You have added Subpart GG, but have not yet added a kiln or furnace. nounits GG GG006 Annual zinc production capacity. This data is required. annualZincProductionCapacity GG GG007 Annual zinc production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualZincProductionCapacity GG GG009 Number of waelz kilns. This data element is required. numberOfWaelzKilns GG GG010 Number of eletrothermic furnaces. This data element is required. numberOfElectrothermicFurnaces GG GG011 Zinc Product. This data element for row(s) [{1}] is required when its row is checked. transientData['zincProductName'] GG GG012 Annual Production of the Product. You must enter a value that is greater than or equal to zero for row(s) [{1}]. You must correct the current value before continuing. transientData['annualProductionQuantity'] GG GG030-1 Unit Name (Unique Name Identifier). This data element is required. Please enter the required data or click CANCEL. unitNameIdentifier GG GG030-2 Unit Name (Unique Name Identifier). This data element is required. Please enter the required data or click CANCEL. unitNameIdentifier GG GG031-1 Unit Type. This data element is required and must be either \'Waelz Kiln\' or \'Electrothermic Furnace \'. Please enter the required data or click CANCEL. unitType GG GG031-2 Unit Type. This data element is required and must be either \'Waelz Kiln\' or \'Electrothermic Furnace \'. Please enter the required data or click CANCEL. unitType GG GG032 You have added a kiln or furnace, but have not yet added an Input Material. subpartGGCarbonContainingInputMaterialMap GG GG043 Enter Own result for Annual CO2 process emissions from Waelz Kiln or Electrothermic furnace. This data element is required if you select Enter/Report Alternate Result. annualCo2ProcessEmissions GG GG050 Input Material. This data element is required and must be either \'Zinc-bearing material\', \'Flux material\', or \'Carbonaceous materials\'. inputMaterialNameType GG GG051 Input Material. This data element is required and must be either \'Zinc-bearing material\', \'Flux material\', \'Carbon electrode\' or \'Carbonaceous materials\'. inputMaterialNameType GG GG052 Number of months missing data procedures were followed to determine the monthly mass of the material. You must enter a value that is greater than or equal to zero and less than or equal to twelve. You must correct the current value before continuing. numberOfMonthsMonthlyMassMaterial GG GG053 Number of months missing data procedures were followed to repeat the test to determine the carbon content. You must enter a value that is greater than or equal to zero and less than or equal to twelve. You must correct the current value before continuing. numberOfMonthsTestCarbonContent GG GG054 Procedure used to develop substitute data for the monthly mass of the carbon containing input material. This data element is required. procedureMonthlyMassOfCarbonInputMaterial GG GG055 Test method used for the carbon content analysis. This data element is required. testMethodForCarbonContentAnalysis GG GG056 Number of months missing data procedures were followed to determine the monthly mass of the material. This data element is required. numberOfMonthsMonthlyMassMaterial GG GG057 Number of months missing data procedures were followed to repeat the test to determine the carbon content. This data element is required. numberOfMonthsTestCarbonContent GG GG100 Zinc products produced. At least one row must be checked. zincProductsProduced GG GG101 Annual Production of the Product. This data element for row(s) [{1}] is required when its row is checked. transientData['annualProductionQuantity'] GG GG301 You need to save a Unit before you can add an Carbon-Containing Input Material. subpartGroupUnitId GG GG302 You have added a process (kiln / furnace) line, but have not yet added an Input Material. Please use the Add an Input Material link to add at least one input for this process line, or click CANCEL. subpartGGCarbonContainingInputMaterialMap[1] H CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML H CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits H CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml H CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions H CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs H CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt H CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow H CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture H CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow H CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits H CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions H CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission H CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission H CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission H CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission H CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> H CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 H CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs H CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt H CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate H CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate H CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType H CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate H CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] H CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] H CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] H CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] H CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] H CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] H CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] H CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] H CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName H CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted H CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission H CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission H CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted H CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions H CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate H CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate H CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate H CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate H H004 Please make a selection or click CANCEL. hasCEMS H H005 Please make a selection or click CANCEL. isCo2EmissionsBasedonRMconsumption H H006 Annual cement production for the facility. This data element is required. annualCementProdcution H H007 Annual cement production for the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualCementProdcution H H009 Raw material name or description. This data element is required. Please enter the required data or click CANCEL. rmNameOrDescription H H010 Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. This data element is required. numOfMonthsMDP_quantity H H011 Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. The value must be a number between 0 through 12 months. The value you provided is outside that range. You must correct the current value before continuing. numOfMonthsMDP_quantity H H012 Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This data element is required. numOfTimesMDP_carbonContent H H013 Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfTimesMDP_carbonContent H H013a Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This value must be either zero or 1. The value you provided is outside that range. You must correct the current value before continuing. numOfTimesMDP_carbonContent H H014 Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. This data element is required. numOfMonthsMDP_quantity H H015 Number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption. The value must be a number between 0 through 12 months. The value you provided is outside that range. You must correct the current value before continuing. numOfMonthsMDP_quantity H H016 Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This data element is required. numOfTimesMDP_carbonContent H H017 Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfTimesMDP_carbonContent H H017a Number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. This value must be either zero or 1. The value you provided is outside that range. You must correct the current value before continuing. numOfTimesMDP_carbonContent H H018 Because you have elected to estimate carbon dioxide emissions from raw material consumption based on consumption of individual materials, you must identify each raw material consumed in the kiln. You have not identified any raw materials consumed in this kiln. rawMaterialsList H H035 Method used to determine clinker production for January. This data element is required. clinkerDataMap['January'].method_clinkerProduction H H036 Method used to determine clinker production for January. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['January'].method_clinkerProduction_Other H H037 Method used to determine the fraction of non-calcined CaO in clinker for January. This data element is required. clinkerDataMap['January'].method_frNonCalinedCao H H038 Method used to determine the fraction of non-calcined MgO in clinker for January. This data element is required. clinkerDataMap['January'].method_frNonCalinedMgo H H039 Method used to determine clinker production for February. This data element is required. clinkerDataMap['February'].method_clinkerProduction H H040 Method used to determine clinker production for February. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['February'].method_clinkerProduction_Other H H041 Method used to determine the fraction of non-calcined CaO in clinker for February. This data element is required. clinkerDataMap['February'].method_frNonCalinedCao H H042 Method used to determine the fraction of non-calcined MgO in clinker for February. This data element is required. clinkerDataMap['February'].method_frNonCalinedMgo H H043 Method used to determine clinker production for March. This data element is required. clinkerDataMap['March'].method_clinkerProduction H H044 Method used to determine clinker production for March. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['March'].method_clinkerProduction_Other H H045 Method used to determine the fraction of non-calcined CaO in clinker for March. This data element is required. clinkerDataMap['March'].method_frNonCalinedCao H H046 Method used to determine the fraction of non-calcined MgO in clinker for March. This data element is required. clinkerDataMap['March'].method_frNonCalinedMgo H H047 Method used to determine clinker production for April. This data element is required. clinkerDataMap['April'].method_clinkerProduction H H048 Method used to determine clinker production for April. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['April'].method_clinkerProduction_Other H H049 Method used to determine the fraction of non-calcined CaO in clinker for April. This data element is required. clinkerDataMap['April'].method_frNonCalinedCao H H050 Method used to determine the fraction of non-calcined MgO in clinker for April. This data element is required. clinkerDataMap['April'].method_frNonCalinedMgo H H051 Method used to determine clinker production for May. This data element is required. clinkerDataMap['May'].method_clinkerProduction H H052 Method used to determine clinker production for May. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['May'].method_clinkerProduction_Other H H053 Method used to determine the fraction of non-calcined CaO in clinker for May. This data element is required. clinkerDataMap['May'].method_frNonCalinedCao H H054 Method used to determine the fraction of non-calcined MgO in clinker for May. This data element is required. clinkerDataMap['May'].method_frNonCalinedMgo H H055 Method used to determine clinker production for June. This data element is required. clinkerDataMap['June'].method_clinkerProduction H H056 Method used to determine clinker production for June. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['June'].method_clinkerProduction_Other H H057 Method used to determine the fraction of non-calcined CaO in clinker for June. This data element is required. clinkerDataMap['June'].method_frNonCalinedCao H H058 Method used to determine the fraction of non-calcined MgO in clinker for June. This data element is required. clinkerDataMap['June'].method_frNonCalinedMgo H H059 Method used to determine clinker production for July. This data element is required. clinkerDataMap['July'].method_clinkerProduction H H060 Method used to determine clinker production for July. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['July'].method_clinkerProduction_Other H H061 Method used to determine the fraction of non-calcined CaO in clinker for July. This data element is required. clinkerDataMap['July'].method_frNonCalinedCao H H062 Method used to determine the fraction of non-calcined MgO in clinker for July. This data element is required. clinkerDataMap['July'].method_frNonCalinedMgo H H063 Method used to determine clinker production for August. This data element is required. clinkerDataMap['August'].method_clinkerProduction H H064 Method used to determine clinker production for August. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['August'].method_clinkerProduction_Other H H065 Method used to determine the fraction of non-calcined CaO in clinker for August. This data element is required. clinkerDataMap['August'].method_frNonCalinedCao H H066 Method used to determine the fraction of non-calcined MgO in clinker for August. This data element is required. clinkerDataMap['August'].method_frNonCalinedMgo H H067 Method used to determine clinker production for September. This data element is required. clinkerDataMap['September'].method_clinkerProduction H H068 Method used to determine clinker production for September. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['September'].method_clinkerProduction_Other H H069 Method used to determine the fraction of non-calcined CaO in clinker for September. This data element is required. clinkerDataMap['September'].method_frNonCalinedCao H H070 Method used to determine the fraction of non-calcined MgO in clinker for September. This data element is required. clinkerDataMap['September'].method_frNonCalinedMgo H H071 Method used to determine clinker production for October. This data element is required. clinkerDataMap['October'].method_clinkerProduction H H072 Method used to determine clinker production for October. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['October'].method_clinkerProduction_Other H H073 Method used to determine the fraction of non-calcined CaO in clinker for October. This data element is required. clinkerDataMap['October'].method_frNonCalinedCao H H074 Method used to determine the fraction of non-calcined MgO in clinker for October. This data element is required. clinkerDataMap['October'].method_frNonCalinedMgo H H075 Method used to determine clinker production for November. This data element is required. clinkerDataMap['November'].method_clinkerProduction H H076 Method used to determine clinker production for November. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['November'].method_clinkerProduction_Other H H077 Method used to determine the fraction of non-calcined CaO in clinker for November. This data element is required. clinkerDataMap['November'].method_frNonCalinedCao H H078 Method used to determine the fraction of non-calcined MgO in clinker for November. This data element is required. clinkerDataMap['November'].method_frNonCalinedMgo H H079 Method used to determine clinker production for December. This data element is required. clinkerDataMap['December'].method_clinkerProduction H H080 Method used to determine clinker production for December. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clinkerDataMap['December'].method_clinkerProduction_Other H H081 Method used to determine the fraction of non-calcined CaO in clinker for December. This data element is required. clinkerDataMap['December'].method_frNonCalinedCao H H082 Method used to determine the fraction of non-calcined MgO in clinker for December. This data element is required. clinkerDataMap['December'].method_frNonCalinedMgo H H083 Number of kilns. This data element is required. numberOfKilns H H084 Number of kilns. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfKilns H H086 Number of operating kilns. This data element is required. numberOfOperatingKilns H H087 Number of operating kilns. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfOperatingKilns H H088a Number of operating kilns. The number of operating kilns should be equal to or less than the total number of kilns. Please double check this value and revise. numberOfOperatingKilns H H089 Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in [{1}]. This data element is required. method_frOfNonCalcinedCao H H090 Method used to determine the fraction of non-calcined CaO in cement kiln dust not recycled to the kiln in [{1}]. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. method_frOfNonCalcinedCao_Other H H091 Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in [{1}]. This data element is required. method_frOfNonCalcinedMgo H H092 Method used to determine the fraction of non-calcined MgO in cement kiln dust not recycled to the kiln in [{1}]. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. method_frOfNonCalcinedMgo_Other H H200 Clinker Production used for January. This data element is required. monthlyCemsDataMap['January'].clinkerProduction H H202 Clinker Production used for February. This data element is required. monthlyCemsDataMap['February'].clinkerProduction H H204 Clinker Production used for March. This data element is required. monthlyCemsDataMap['March'].clinkerProduction H H206 Clinker Production used for April. This data element is required. monthlyCemsDataMap['April'].clinkerProduction H H208 Clinker Production used for May. This data element is required. monthlyCemsDataMap['May'].clinkerProduction H H210 Clinker Production used for June. This data element is required. monthlyCemsDataMap['June'].clinkerProduction H H212 Clinker Production used for July. This data element is required. monthlyCemsDataMap['July'].clinkerProduction H H214 Clinker Production used for August. This data element is required. monthlyCemsDataMap['August'].clinkerProduction H H216 Clinker Production used for September. This data element is required. monthlyCemsDataMap['September'].clinkerProduction H H218 Clinker Production used for October. This data element is required. monthlyCemsDataMap['October'].clinkerProduction H H220 Clinker Production used for November. This data element is required. monthlyCemsDataMap['November'].clinkerProduction H H222 Clinker Production used for December. This data element is required. monthlyCemsDataMap['December'].clinkerProduction H H250 You have selected Subpart H for reporting, but you have not yet added a kiln. groupUnit H H260 Because you have indicated "Kiln specific feed-to-clinker ratio" as the method used to determine one or more month\'s clinker production, you should indicate that monthly kiln-specific clinker factors were used to determine monthly clinker product by selecting the check box at the top of Monthly Information page. clinkerDataMap['January'].method_clinkerProduction H H261 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for January. clinkerDataMap['January'].method_clinkerProduction H H262 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for February. clinkerDataMap['February'].method_clinkerProduction H H263 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for March. clinkerDataMap['March'].method_clinkerProduction H H264 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for April. clinkerDataMap['April'].method_clinkerProduction H H265 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for May. clinkerDataMap['May'].method_clinkerProduction H H266 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for June. clinkerDataMap['June'].method_clinkerProduction H H267 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for July. clinkerDataMap['July'].method_clinkerProduction H H268 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for August. clinkerDataMap['August'].method_clinkerProduction H H269 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for September. clinkerDataMap['September'].method_clinkerProduction H H270 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for October. clinkerDataMap['October'].method_clinkerProduction H H271 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for November. clinkerDataMap['November'].method_clinkerProduction H H272 Because you have indicated that monthly kiln-specific clinker factors were used to determine monthly clinker product, you should select "Kiln specific feed-to-clinker ratio" as the method used to determine the month\'s clinker production for December. clinkerDataMap['December'].method_clinkerProduction H RM-1 The raw material name or description must be unique. Please enter a different name. rawMaterial H UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName H UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType HH ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] HH ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] HH HH001 Please indicate if the landfill is open or closed. isOpen HH HH002 An indication that the landfill is open in the current reporting year has been made, but the estimated year of landfill closure has not been reported. Please enter the estimated year of landfill closure. esimatedClosureYear HH HH003 The estimated year of landfill closure has not been reported or is invalid. You must enter a valid year that is greater than zero before continuing. esimatedClosureYear HH HH007 An indication that the landfill was closed in the current reporting year has been made. However, the year in which the landfill stopped accepting waste for disposal has not been reported or is invalid. This is required per section 98.346(a). You must enter a valid year that is greater than 1960 before continuing. acceptWasteStoppedYear HH HH010 Please indicate if scales were used to determine the annual waste quantity prior to the first year of emissions reporting. This data element is required. wereScalesUsed HH HH012 An indication that one of the other methods (Method 1, 2, 3, or None) used to determine the historical annual waste disposal quantities has not been provided. This data element is required. wasteQunatityEstimationMethodUsed HH HH013 Please enter the first (start) year scales were used to determine annual waste quantities prior to [currentReportingYear]. scalesUsedPeriodStartYear HH HH014 The first (start) year scales were used to determine annual waste quantities prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. scalesUsedPeriodStartYear HH HH015 Please enter the last (end) year scales were used to determine annual waste quantities prior to the first year of emissions reporting. scalesUsedPeriodEndYear HH HH016 The last (end) year scales were used to determine annual waste quantities prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the value before continuing. scalesUsedPeriodEndYear HH HH017 The last (end) year scales were used to determine annual waste quantities that you provided is before the first (start) year. Please correct the start and/or end year. scalesUsedPeriodStartYear HH HH018 Method #1, #2, or #3 was indicated to have been used for one or more years prior to the first emissions reporting year, but the historical waste estimation method start year has not been provided. Please correct the end year or click CANCEL. estimationPeriodStartYear HH HH019 The first (start) year the method selected was used to estimate historical annual waste quantities. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. estimationPeriodStartYear HH HH020 Method #1, #2, or #3 was indicated to have been used for one or more years prior to the first emissions reporting year, but the historical waste estimation method end year has not been provided. Please correct the end year or click CANCEL. estimationPeriodEndYear HH HH021 The last (end) year the method selected was used to estimate historical annual waste quantities. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. estimationPeriodEndYear HH HH022 Method #1, #2, or #3 was indicated to have been used for one or more years prior to the first emissions reporting year, but the historical waste estimation method end year you provided is before the start year. Please correct the start and/or end year or click CANCEL. estimationPeriodEndYear HH HH023 Reason for using the estimation method selected. This data element is required. reasonForEstimationMethod HH HH024 Landfill capacity. This data element is required. landfillCapacity HH HH025 Landfill capacity. You must enter a value that is greater than zero. You must correct the current value before continuing. landfillCapacity HH HH027 An indication of whether passive vents and/or passive flares (vents or flares that are not considered part of the gas collection system) are present at the landfill has not been made. This data element is required per sections 98.346(h) and 98.346(i)(7). If this is indeed a substantive error, please correct the value and submit your report. If you believe it to be correct, please submit the value as is. hasPassiveVentsOrFlares HH HH032 Please indicate if the landfill has a landfill gas collection system before continuing. hasLFGCollectionSystem HH HH034 Capacity of the landfill gas collection system. An indication was made that your landfill has a landfill gas collection system, but the capacity of the landfill gas collection system has not been reported. This data element is required. gasCollectionSystem.systemCapacity HH HH0345 An indication that a gas collection system is at your facility has been made, but a unique name or identifier for the landfill gas measurement location has not been provided. This data element is required. Please provide a name, or click CANCEL. name HH HH0349 Annual operating hours for the landfill gas measurement location. The annual operating hours must be a number between zero and 8760 (or between zero and 8784 in a leap year). Please enter a valid number of operating hours, or click CANCEL. annualOperatingHours HH HH035 Capacity of the landfill gas collection system. You must enter a value that is greater than zero. You must correct the current value before continuing. gasCollectionSystem.systemCapacity HH HH0350 An indication that a gas collection system is at your facility has been made, but the operating hours for the landfill gas measurement location has not been provided. This data element is required. annualOperatingHours HH HH0358 You have added a measurement location, but have not yet added a destruction device. If a destruction device is associated with this measurement location, but is located off-site, select the ADD a Destruction Device link and enter the total annual hours for the reporting year (8760 or 8784 if it is a leap year) and enter a value of 1 for destruction efficiency (DE). destructionDevices HH HH036 An indication was made that your landfill has a landfill gas collection system, but the number of wells has not been reported. This data element is required. gasCollectionSystem.numberOfwells HH HH037 Number of wells. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. gasCollectionSystem.numberOfwells HH HH0374 Information regarding the Waste Type Details (percent by weight, DOC, and/or decay rate) for the years {1} have not been reported. Please address this critical error. Then you can return here to perform another final review and submit your report. data['dataMissingYears'] HH HH0375 The tipping receipts start year of {1} is on or after the reporting year 2010. Please address this critical error. Then you can return here to perform another final review and submit your report. data['tippingReceiptsStartYear'] HH HH038 The frequency of leachate circulation. This data element is required. leachateCirculationFrequency HH HH039 The surface area of the landfill containing waste is blank. This data element is required per 98.346(f). totalSurfaceAreaContainingWaste HH HH040 The surface area of the landfill containing waste. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalSurfaceAreaContainingWaste HH HH042 Please indicate if active aeration of waste in the landfill was conducted during the current reporting year, or click CANCEL isActiveAerationPerformed HH HH043 Aeration blower capacity. This data element is required. blowerCapacity HH HH044 Aeration blower capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. blowerCapacity HH HH046 Fraction of the landfill containing waste affected by the aeration. This data element is required. fractionOfLandFillAffected HH HH047 The fraction of the landfill containing waste affected by the aeration. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. fractionOfLandFillAffected HH HH049 Total hours during the reporting year the aeration blower was operated. This data element is required. totlaBlowerOperatedHours HH HH050 Total number of hours in the reporting year that the aeration blower was operated. The annual operating hours must be a number between zero and 8760 (or between zero and 8784 in a leap year). The value you provided is outside that range. You must correct the current value before continuing. totlaBlowerOperatedHours HH HH053 Number of days substitute data was used to determine the waste quantity. This data element is required. numberOfDaysSubstituteUsed HH HH054 Number of days substitute data was used to determine the waste quantity. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. numberOfDaysSubstituteUsed HH HH059 A waste type group has been selected, but a waste type under each group that comprises the annual waste quantity has not been selected. This is a required field. Please go back and select a waste type under the waste group selected. wasteQuantityGroup HH HH060 Methane generation, adjusted for oxidation, from the landfill in the reporting year. This data element is required. officialUnroundedModeledCh4Generation HH HH061 Methane generation, adjusted for oxidation, from the landfill in the reporting year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation HH HH063-1 The value reported for Equation HH-5 (methane generation, adjusted for oxidation) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation HH HH063-2 The value reported for Equation HH-5 (methane generation, adjusted for oxidation) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation HH HH064-1 The value for Equation HH-5 (methane generation, adjusted for oxidation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation HH HH064-2 The value for Equation HH-5 (methane generation, adjusted for oxidation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation HH HH070 The annual volume of landfill gas collected for destruction has not been reported. This data element is required. gasCollectionSystemDetails.annualVolume HH HH071 The annual volume of landfill gas collected for destruction must be a value that is greater than or equal to zero. You must correct the current value before continuing. gasCollectionSystemDetails.annualVolume HH HH073 Number of days substitute data procedure was used to determine the volume of landfill gas collected for destruction. This data element is required. gasCollectionSystemDetails.numberOfDaysSubDataUsedAnnualVolume HH HH074 Number of days substitute data procedure was used to determine the volume of landfill gas collected for destruction. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. gasCollectionSystemDetails.numberOfDaysSubDataUsedAnnualVolume HH HH076 The annual average methane concentration of landfill gas collected for destruction has not been reported. This data element is required. gasCollectionSystemDetails.annualAverageCh4Concentration HH HH077 The annual average methane concentration of landfill gas collected for destruction must be reported as a percentage, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. gasCollectionSystemDetails.annualAverageCh4Concentration HH HH080 If methane is monitored daily, the number of days substitute data was used to determine the annual average CH4 concentration of landfill gas collected for destruction. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. gasCollectionSystemDetails.numberOfDaysSubDataUsedAvgCh4Con HH HH083 Was temperature incorporated into internal calculations run by the collection system\' monitoring equipment? This data element is required. gasCollectionSystemDetails.isTempIncorporated HH HH084 Average monthly temperature at which flow is measured, for month(s) [{1}]. Because you have indicated that temperature is not incorporated into internal calculations run by the collection systems\' monitoring equipment this data element is required. averageTemperature HH HH096 Was pressure incorporated into internal calculations run by the collection system\' monitoring equipment? This data element is required. gasCollectionSystemDetails.isPressureIncorporated HH HH097 Average monthly pressure at which flow is measured, for month(s) [{1}]. Because you have indicated that pressure is not incorporated into internal calculations run by the collection systems\' monitoring equipment this data element is required. averagePressure HH HH109 Was landfill gas flow measured on a wet or dry basis?. This data element is required. Please make a selection or click CANCEL. gasCollectionSystemDetails.isGasFlowWetBasis HH HH110 Was CH4 concentration measured on a wet or dry basis?. This data element is required. Please make a selection or click CANCEL. gasCollectionSystemDetails.isCh4ConcentrationWetBasis HH HH111 Average monthly moisture, for month(s) [{1}]. Because you have indicated that moisture is not incorporated into internal calculations run by the collection systems\' monitoring equipment this data element is required. averageMoistureContent HH HH111a Average monthly moisture, for month(s) [{1}]. The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. averageMoistureContent HH HH123 Depth of area with no waste in-place (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithNoWasteA1 HH HH125 The depth of area without active gas collection, regardless of cover type (A2) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithOutActiveGasCollectionA2 HH HH126 Depth of area without active gas collection, regardless of cover type (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithOutActiveGasCollectionA2 HH HH128 The depth of area with daily soil cover and active gas collection (A3) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithDailySoilCoverAndActiveGasA3 HH HH129 Depth of area with daily soil cover and active gas collection (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithDailySoilCoverAndActiveGasA3 HH HH131 The depth of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (area type A4 in Table HH-3) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithSoilCoverNotMeetingCriteriaA4 HH HH132 Depth of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithSoilCoverNotMeetingCriteriaA4 HH HH134 The depth of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (area type A5 in Table HH-3) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithSoilCover3FeetOrGeoCoverA5 HH HH135 Depth of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithSoilCover3FeetOrGeoCoverA5 HH HH137 A waste type group (Bulk Waste, Modified Bulk Waste, or Waste Composition) from Table HH-1 has not been selected. This is a required field. A waste type group must first be selected in order to select the waste type(s) disposed of at the landfill during the year. wasteQuantityGroup HH HH139 Please indicate if tipping receipts or company records were used to determine waste disposal quantities prior to the first year of emissions reporting, or click CANCEL. wereTippingReceiptsUsed HH HH140 An indication that tipping receipts were used to determine the annual waste quantities for years prior to the first emissions reporting year, but a start year for using tipping receipts has not been provided. This data element is required. tippingReceiptsStartYear HH HH141 An indication that tipping receipts were used to determine the annual waste quantities for years prior to the first emissions reporting year, but the tipping receipts end year has not been reported. This data element is required. tippingReceiptsEndYear HH HH142 An indication that tipping receipts were used to determine the annual waste quantities for years prior to the first emissions reporting year, but the tipping receipts end year provided is before the start year. Please correct the start and/or end year or click CANCEL. tippingReceiptsEndYear HH HH156 Any additional description of the aeration system. This data element is required. additionalDescription HH HH157 You have selected Subpart HH for reporting, but you have not yet completed the Landfill Details - Reporting Years page. isOpen HH HH165 A type of cover material (organic, clay, sand, and/or other soil mixture) has not been reported for the landfill. This is required per section 98.346(f). organicCoverMaterialType HH HH181 The surface area for A1 (area with no waste-in-place) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithNoWasteA1 HH HH182 The surface area of area with no waste in-place (A1) must be reported. You must enter a value that is greater than or equal to zero before continuing. If no waste is in place for this area type, enter a 0. surfaceAreaWithNoWasteA1 HH HH184 The surface area for A2 (area without active gas collection, regardless of cover type) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithOutActiveGasCollectionA2 HH HH185 The surface area of area without active gas collection, regardless of cover type (A2) has not been reported. You must enter a value that is greater than or equal to zero before continuing. If no waste is in place for this area type, enter a 0. surfaceAreaWithOutActiveGasCollectionA2 HH HH187 The surface area for A3 (area with daily soil cover and active gas collection) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithDailySoilCoverAndActiveGasA3 HH HH188 The surface area of area with daily soil cover and active gas collection (area type A3 in Table HH-3) must be reported. You must enter a value that is greater than or equal to zero before continuing. If no waste is in place for this area type, enter a 0. surfaceAreaWithDailySoilCoverAndActiveGasA3 HH HH190 The surface area of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (area type A4 in Table HH-3) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithSoilCoverNotMeetingCriteriaA4 HH HH191 The surface area of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (area type A4 in Table HH-3). You must enter a value that is greater than or equal to zero before continuing. surfaceAreaWithSoilCoverNotMeetingCriteriaA4 HH HH193 The surface area of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (area type A5 in Table HH-3) has not been reported. This data element is required even if the value to report is 0 square meters. Please double check and revise this value before submitting the report. surfaceAreaWithSoilCover3FeetOrGeoCoverA5 HH HH194 The surface area of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (area type A5 in Table HH-3) has not been reported. This data element is required even if the value to report is 0 square meters. Please double check and revise this value before submitting the report. surfaceAreaWithSoilCover3FeetOrGeoCoverA5 HH HH196 The percent by weight for the waste type selected has not been reported. This is a required field and must be expressed as a decimal fraction. Please go back and enter this value. percentByWeight HH HH197 Percent by weight for waste type, expressed as a decimal fraction. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click Cancel. percentByWeight HH HH199 The value for the degradable organic carbon (DOC), expressed as a decimal fraction, has not been reported. This is a required field. doc HH HH200 The value reported for the degradable organic carbon (DOC), expressed as a decimal fraction, must be a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click Cancel. doc HH HH202 A value for the decay rate (k) has not been reported. This is a required field. decayRate HH HH203 The value reported for the decay rate (k) must be a value that is greater than or equal to zero. You must correct the current value before continuing, or click Cancel. decayRate HH HH211 Please indicate if working capacities were used to determine the annual waste quantity prior to [currentReportingYear]. This data element is required. wasWorkingCapacityMethodUsed HH HH212 An indication that working capacity was used to determine the annual total waste disposal quantity for one or more years, but the working capacities period start year has not been provided. Please correct the start year or click CANCEL. workingCapacityStartYear HH HH213 An indication was made that working capacity was used to determine the annual total waste disposal quantity for one or more years, but the working capacities period end year has not been provided. Please correct the end year or click CANCEL. workingCapacityEndYear HH HH214 An indication was made that working capacity was used to determine the annual total waste disposal quantity for one or more years, but the working capacities period end year you provided is before the start year. Please correct the start and/or end year or click CANCEL. workingCapacityEndYear HH HH215 An indication that the landfill was closed in the current reporting year has been made. However, the year in which the landfill stopped accepting waste for disposal that you have reported is after the current reporting year. Please enter a valid year in which the landfill stopped accepting waste for disposal, or change the landfill open/closed indication. acceptWasteStartYear HH HH216 First year the landfill accepted waste. You must enter a valid year for the first year the landfill accepted waste that is greater than zero. You must correct the current value before continuing. acceptWasteStartYear HH HH218 You have indicated that scales were used to determine the annual waste quantity in the year, but you have not provided the quantity (metric tons). This data element is required. methodsUsedAndQuantity HH HH219 You have indicated that working capacities were used to determine the annual waste quantity in the year, but you have not provided the quantity (metric tons). This data element is required. methodsUsedAndQuantity HH HH220 You have indicated that methods other than scales or working capacities were used to determine the annual waste quantity in the year, but you have not provided the quantity (metric tons). This data element is required. methodsUsedAndQuantity HH HH221 An indication was made that scales were used to determine the annual waste disposal quantities for one or more of the years prior to the first emissions reporting year, but the waste quantities themselves have not been reported. This data element is required. methodsUsedAndQuantity HH HH222 An indication that the method of working capacity was used for one or more years to determine the total annual waste disposal quantity in metric tons for one or more years prior to the first emissions reporting year. However, the total total annual waste disposal quantity has not been reported for one or more years. This data element is required. Please go back and review the range of years provided and the waste quantities reported under the Working Capacity Quantity column on the Landfill Details-Historical Years page. methodsUsedAndQuantity HH HH223 Method #1, #2, or #3 was selected, but the waste quantity determined using the historical waste quantity method(s) has not been reported. MRR Reference: 98.346(b). methodsUsedAndQuantity HH HH266 The first (start) year working capacities were used to determine waste disposal prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. workingCapacityStartYear HH HH267 The last (end) year working capacities were used to determine waste disposal prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the value before continuing. workingCapacityEndYear HH HH268 The first (start) year tipping receipts or company records were used to determine waste disposal prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the current value before continuing. tippingReceiptsStartYear HH HH269 The last (end) year tipping receipts or company records were used to determine waste disposal prior to the first year of emissions reporting. You must enter a valid year that is greater than or equal to 1960. You must correct the value before continuing. tippingReceiptsEndYear HH HH300 You have elected to enter your own result, but have not entered a value for the gas collection system collection efficiency (CE). You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEstimatedGasCollectionSysEfficiency HH HH301 Collection efficiency estimated at the landfill. Please enter the collection efficiency as a decimal fraction between zero and one. You must correct this before continuing. officialUnroundedEstimatedGasCollectionSysEfficiency HH HH305-1 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-5. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedModeledCh4Generation HH HH305-2 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-5. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedModeledCh4Generation HH HH307 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-6. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEqHH6Ch4 HH HH308 For Equation HH-6, was the value for CH4 generation modeled (using Equation HH-1) or measured (using Equation HH-4)? This data element is required. Please be sure that you have entered results for both Equation HH-1 and Equation HH-4. officialRoundedEqHH6Ch4 HH HH309 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-7. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedAnnualCh4GenerationEqHH7 HH HH310 Back-calculated methane generation (Equation HH-7). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAnnualCh4GenerationEqHH7 HH HH311 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-8. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEqHH8Ch4 HH HH312 Methane emissions (Equation HH-8). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedEqHH8Ch4 HH HH316 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-1. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedTotalAnnualModeledCh4Generation HH HH317 The value for the modeled methane generation calculated using Equation HH-1. You must enter a value that is greater than zero. You must correct this before continuing. officialUnroundedTotalAnnualModeledCh4Generation HH HH318 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-1. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedTotalAnnualModeledCh4Generation HH HH319 The value for the modeled methane generation calculated using Equation HH-1. You must enter a value that is greater than zero. You must correct this before continuing. officialUnroundedTotalAnnualModeledCh4Generation HH HH320 The value for Equation HH-8 (methane emissions) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. This data element is required. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneGenerationEquationHH8\CalculatedValue officialUnroundedEqHH8Ch4 For Landfills with gas collection systems include a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH8 HH HH321 The value for Equation HH-7 (back-calculated methane generation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. This data element is required. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneGenerationEquationHH7\CalculatedValue officialUnroundedAnnualCh4GenerationEqHH7 For Landfills with gas collection systems include a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH7 HH HH322 The value reported for Equation HH-6 (methane emissions) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedEqHH6Ch4 HH HH323 The value for Equation HH-6 (methane emissions) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\ GasCollectionSystemDetails\ MethaneGenerationEquationHH6\CalculatedValue officialUnroundedEqHH6Ch4 For Landfills with gas collection systems include a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH6 HH HH324 The estimated gas collection system efficiency has not been reported. Please go back and revise this value before submitting your report. This data is required. officialUnroundedEstimatedGasCollectionSysEfficiency HH HH326 The value for Equation HH-1 (modeled methane generation) from the landfill in the reporting year has not been reported. This data element is required. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\ GasCollectionSystemDetails\AnnualModeledCH4Generation\CalculatedValue officialUnroundedTotalAnnualModeledCh4Generation For Landfills with gas collection systems include a non-null numeric value for the data element with the specified xpath. HH HH328 The value for Equation HH-1 (modeled methane generation) from the landfill in the reporting year has not been reported. This data element is required. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\ NoGasCollectionSystemDetails\ officialUnroundedTotalAnnualModeledCh4Generation For Landfills without gas collection systems include a non-null numeric value for the data element with the specified xpath. HH HH329 The value for the oxidation factor (OX) used in Equation HH-5 has not been provided. This is a required data element. oxHH5 HH HH330 The value for the oxidation factor (OX) used in Equation HH-6 has not been provided. This is a required data element. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\MethaneOxidationFractionHH6 oxHH6 For Landfills with gas collection systems include the this data element with value between 0 and 1 HH HH331 The value for the oxidation factor (OX) used in Equation HH-7 has not been provided. This is a required data element. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\MethaneOxidationFractionHH7 oxHH7 For Landfills with gas collection systems include the this data element with value between 0 and 1 HH HH332 The value for the oxidation factor (OX) used in Equation HH-8 has not been provided. This is a required data element. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\ MethaneOxidationFractionHH8 oxHH8 For Landfills with gas collection systems include the this data element with value between 0 and 1 HH HH333 An indication was made that this facility has a gas collection system, but an indication as to whether landfill gas destruction occurs at the facility, off-site, or both has not been made. This data element is required. gasCollectionSystemDetails.destructionOccurredAt HH HH342 Method #2 was selected for a range of years, but the estimated population was not provided for one or more of the years within that range. estimatedPopulationServedByTheLandfill HH HH343 Method #3 was used for one or more years to determine the total annual waste quantity disposed, but the value for landfill capacity (LFC) used in Equation HH-3 was not provided. This is a required data element. For closed landfills, the value should equal the total waste-in-place at closure. For open landfills, the value should equal the capacity of the landfill used (or total waste-in-place). landfillCapacityThatUsesMethod3 HH HH344 You have not selected the method(s) used to determine the total annual waste disposal quantity for one or more years since the first year of emissions reporting. Please review the \'Waste Quantities/Methods Since First Year of Reporting\' table on the Landfill Details - Reporting Years page and use the check boxes provided to select the appropriate methods used for each year of the table and report the associated quantities (metric tons). If your facility was open each year since the first year of emissions reporting, but did not dispose of any waste in a given year, please select the method that would have been used had waste been disposed, and report a quantity of zero. transientData['wasteQuantities'] HH HH346-3 Your report indicates the landfill does not have a gas collection system, however the total annual subpart methane emissions of [{1} metric tons] for the landfill does not equal [{2} metric tons], which is the value calculated by Equation HH-5. Please address this critical error. Then you can return here to perform another final review and submit your report. data['isAnnualMethaneEmissionsWithinRange'] HH HH372 The number of annual operating hours for the measurement location cannot be lower than the number of annual operating hours for the destruction device. Please enter a valid number of operating hours, or click CANCEL. destructionDevices HH HH373 The number of annual operating hours for the destruction device cannot be higher than the number of annual operating hours for the measurement location. Please enter a valid number of operating hours, or click CANCEL. annualOperatingHours HH HH374 The number of annual operating hours ({1}) for the destruction device {2} cannot be higher than the number of annual operating hours ({3}) for the measurement location {4}. You must enter number of annual operating hours for either the destruction device or the measurement location. destructionDevices HH HH378 You reported 0 for the Annual operating hours for the landfill gas measurement location ({1}). However, for the same measurement location you have reported an Annual quantity of recovered CH4 ({2} (metric tons)) greater than 0, implying the measurement location was operational for a period of time during the reporting year. You must report Annual operating hours for the measurement location greater than zero, if Annual quantity of recovered CH4 is greater than zero. Please check the values you entered and correct before continuing. recoveredCh4Quantity I GHG-ADD-2 The greenhouse gas you are attempting to add is invalid because it already exists on the selection list provided. Please enter a unique greenhouse gas, or click CANCEL. ghgExisting I I0442-1 You did not select a gas/process type where DRE was claimed for your abatement system [{1}] in the fab [{2}]. Please address this critical error. Then you can return here to perform another final review and submit your report. data['isProcessSubTypeChecked'] I I0444 You cannot add this greenhouse gas because the CAS Registry Number you have provided for this 'other' gas matches with an existing entry in e-GGRT's extended 40 CFR Part 98 Table A-1 gas list. It is possible it is included in the selection list provided, but with a different chemical name than the one you are using. The gas with the matching CAS Registry Number is identified within e-GGRT as follows: CAS Registry Number: {1}; Gas Name: {2}; Chemical Formula: {3}. If you would like to select this gas, click CANCEL and locate the gas in the selection list. If you are unable to locate this gas on the selection list provided, please <a href=http://www.ccdsupport.com/confluence/display/help/Contact+the+Help+Desk+-+Issues+Related+to+the+Identification+of+Specific+f-GHGs target=_blank>contact the GHGRP Help Desk</a>. transientData['isNewGasTableA1'] I I0627 "Used default factors" was selected as the method for estimating emissions for a gas/process type combination [{1}, CAS No. {2} / {3}] that does not have a default emission factor for the associated wafer size [{4}] for Semiconductor manufacturing, as specified for fab [{5}]. Please address this critical error. Then you can return here to perform another final review and submit your report. data['isSemiCombinationValid'] I I0629 Substrate Type. This data element is required. Please make a selection or click CANCEL. substrateType I I0630 Other Substrate Type (specify) is a required field when "other" is selected as the substrate type. Please enter a value or click CANCEL. otherSubstrateType I I0631 Annual Production of this Substrate in Terms of Surface Area (square meters). This data element is required. Please enter a value or click CANCEL. annualProductionofSubstrate I I0632 Annual Production of this Substrate in Terms of Surface Area (square meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualProductionofSubstrate I I0635 Substrate Type. You have not yet added at least one substrate type for this fab. substrateTypes I I0648 Substrate Type. You may only enter a Substrate Type to a fab once, with the exception of the "other" type. Please select a different Substrate Type or click the CANCEL button to return to the Fab Information screen. transientData['substrateTypeAlreadySelected'] II II0501 You have selected Subpart II for reporting, but you have not yet added an anaerobic process. none II II0502 Name or ID. This data element is required. Please enter the required data or click CANCEL. anaerobicProcessIdentifier II II0503 Anaerobic Process. This data element is required. Please enter the required data or click CANCEL. anaerobicProcessType II II0504 Is biogas generated in the process recovered? This data element is required. Please enter the required data or click CANCEL. isBiogasRecovered II II0505 Number of weeks the anaerobic process system was operational. This data element is required. Please enter the required data or click CANCEL. numberOfWeeksSystemOperational II II0506 Does the facility measure COD or BOD5 concentration of the wastewater entering the anaerobic process? This data element is required. Please enter the required data or click CANCEL. doesFacilityMeasureCodOrBodConcentration II II0507 How does the facility monitor the CH4 concentration in the biogas collected for destruction? This data element is required. Please enter the required data or click CANCEL. methaneConcentrationMonitoringMethod II II0508 Is the biogas temperature incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL. isBiogasTemperatureIncorporated II II0509 Is the biogas pressure incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL. isBiogasPressureIncorporated II II0510 Is the biogas moisture content incorporated into the monitoring equipment internal calculations? This data element is required. Please enter the required data or click CANCEL. isBiogasMoistureContentIncorporated II II0511 Does CH4 destruction occur at the facility, off-site, or both? This data element is required. Please enter the required data or click CANCEL. methaneDestructionLocation II II0512 Was biogas flow measured on a wet or dry basis? This data element is required. Please enter the required data or click CANCEL. isBiogasFlowWetDryBasis II II0513 Was biogas CH4 concentration measured on a wet or dry basis? This data element is required. Please enter the required data or click CANCEL. isBiogasMethaneWetDryBasis II II0514 Flow for week(s) [{1}]. This data element is required. weeklyVolumeOfWastewater II II0515 COD for week(s) [{1}]. This data element is required. weeklyAverageCodBodConcentration II II0516 B0 for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported. methaneProductionPotential II II0517 MCF for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported. methaneConversionFactor II II0518 Report this value for CH4Gn. This data element is required. officialUnroundedCh4Generated II II0519 Report this value for CH4Gn. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4Generated II II0520 Report which CH4Gn result? This data element is required. isUserOverriddenCh4Generated II II0521 Flow for week(s) [{1}]. This data element is required. weeklyVolumeOfWastewater II II0522 BOD for week(s) [{1}]. This data element is required. weeklyAverageCodBodConcentration II II0523 B0 for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported. methaneProductionPotential II II0524 MCF for week(s) [{1}]. This data element is required if you indicate that an alternate value is being reported. methaneConversionFactor II II0525 Report this value for CH4Gn. This data element is required. officialUnroundedCh4Generated II II0526 Report this value for CH4Gn. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4Generated II II0527 Report which CH4Gn result? This data element is required. isUserOverriddenCh4Generated II II0528 Report this value for CH4En. This data element is required. officialUnroundedCh4 II II0529 Report this value for CH4En. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 II II0530 Report which CH4En result? This data element is required. isUserOverriddenCh4 II II0531 Volumetric Biogas Flow for week(s) [{1}]. This data element is required. weeklyVolumetricBiogasFlow II II0532 Biogas CH4 Concentration for week(s) [{1}]. This data element is required. weeklyBiogasMethaneConcentration II II0533 Biogas Temperature for week(s) [{1}]. This data element is required. weeklyBiogasTemperature II II0534 Biogas Pressure for week(s) [{1}]. This data element is required. weeklyBiogasPressure II II0535 Biogas Moisture for week(s) [{1}]. This data element is required. weeklyBiogasMoistureContent II II0536 Annual quantity of CH4 recovered from the process. This data element is required. officialUnroundedCh4Recovered II II0537 Annual quantity of CH4 recovered from the process. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4Recovered II II0538 Annual operating hours for the primary destruction device. This data element is required. annualOperatingHoursOfPrimaryDestructionDevice II II0539 Annual operating hours for the primary destruction device. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualOperatingHoursOfPrimaryDestructionDevice II II0540 Destruction efficiency for the primary destruction device. This data element is required. methanePrimaryDeviceDestructionEfficiency II II0541 Destruction efficiency for the primary destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing. methanePrimaryDeviceDestructionEfficiency II II0542 Is a back-up destruction device present at the facility? This data element is required. isBackUpDestructionDevicePresentAtFacility II II0543 Annual operating hours for the back-up destruction device. This data element is required if you indicate that a back-up destruction device is present. annualOperatingHoursOfBackUpDestructionDevice II II0544 Annual operating hours for the back-up destruction device. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualOperatingHoursOfBackUpDestructionDevice II II0545 Destruction efficiency for the back-up destruction device. This data element is required if you indicate that a back-up destruction device is present. methaneBackUpDeviceDestructionEfficiency II II0546 Destruction efficiency for the back-up destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing. methaneBackUpDeviceDestructionEfficiency II II0547 Report this value for CH4En. This data element is required. officialUnroundedCh4 II II0548 Report this value for CH4En. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 II II0549 Report which CH4En result? This data element is required. isUserOverriddenCh4 II II0550 Average depth of the lagoon. This data element is required. averageLagoonDepth II II0551 Document or diagram that pertains to this process. This data element is required. uploadedDiagramOrDocumentName II II0552 Number of weeks the anaerobic process system was operational. You must enter a value that is greater than or equal to zero and less than or equal to 52. You must correct the current value before continuing. numberOfWeeksSystemOperational II II0562 Annual operating hours for the primary destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. annualOperatingHoursOfPrimaryDestructionDevice II II0563 Annual operating hours for the back-up destruction device. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. annualOperatingHoursOfBackUpDestructionDevice II II0571 CH4 collection efficiency (based on cover type). This data element is required. methaneCollectionEfficiency II II0575 Report which annual quantity of CH4 recovered result? This data element is required. isUserOverriddenCh4Generated II II0576 Biogas CH4 Concentration for week(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. weeklyBiogasMethaneConcentration II II0577 Biogas Moisture for week(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing. weeklyBiogasMoistureContent II II0600 You have selected Subpart II for reporting, but you have not yet uploaded a file containing a narrative description and/or diagram of a wastewater treatment system. none II II0602 Number of hours the biogas collection system was operational. This data element is required if biogas generated in the process recovered. Please enter the required data or click CANCEL. numberOfHoursTheBiogasSystemOperational II II0603 Number of hours the biogas collection system was operational. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. numberOfHoursTheBiogasSystemOperational II II0604 The number of annual operating hours for the primary destruction device cannot be higher than the number of hours the biogas collection system was operational. Please enter a valid number of operating hours, or click CANCEL. annualOperatingHoursOfPrimaryDestructionDevice II II0605 The number of annual operating hours for the back-up destruction device cannot be higher than the number of hours the biogas collection system was operational. Please enter a valid number of operating hours, or click CANCEL. annualOperatingHoursOfBackUpDestructionDevice II II0606 The number of annual operating hours for the primary destruction device cannot be higher than the number of hours the biogas collection system was operational. Please enter a valid number of operating hours, or click CANCEL. numberOfHoursTheBiogasSystemOperational II II0607 The number of annual operating hours for the back-up destruction device cannot be higher than the number of hours the biogas collection system was operational. Please enter a valid number of operating hours, or click CANCEL. numberOfHoursTheBiogasSystemOperational II II5007 Does the facility use a wet milling or dry milling process? This data element is required if the facility performs an ethanol production processing operation. Please make a selection or click CANCEL. If the facility does not perform an ethanol production processing operation, select the last option. ethanolProductionProcessingOperation II II501 For reporting year {1} you have reported negative CH4 emissions [{2} (metric tons)] for Subpart II. It is not expected for Subpart II facilities to report negative emissions from the reported processes. Please go back into your {1} report and verify that all of the facility\'s inputs are reported correctly. Please address this critical error. Then you can return here to perform another final review and submit your report. data[methaneCalcValue] II II502 The fraction of hours the primary destruction device was operating during the {1} reporting year is greater than 1 (100%) which is unexpected. Please address this critical error. Then you can return here to perform another final review and submit your report. data['deviceOperatingHours'] K CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML K CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits K CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml K CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions K CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs K CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt K CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow K CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture K CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow K CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits K CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions K CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission K CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission K CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission K CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission K CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> K CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 K CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs K CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt K CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate K CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate K CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType K CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate K CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] K CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] K CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] K CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] K CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] K CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] K CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] K CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] K CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName K CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted K CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission K CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission K CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted K CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions K CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate K CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate K CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate K CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate K K001 Annual facility ferroalloy product production capacity. This data element is required. annualFerroAlloyProductionCapacity K K002 Annual facility ferroalloy product production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFerroAlloyProductionCapacity K K003 Please make a selection or click CANCEL. hasCEMS K K004 Name of input/output to the furnace. This data element is required. name K K005 Type of input/output to the furnace. This data element is required. type K K006 Method used to determine carbon content. This data element is required. methodForCarbonContent K K007 Number of months that missing data procedures were followed to determine monthly mass of the input or output. This data element is required. numOfMonthsMissingProcedureUsed K K008 Number of months that missing data procedures were followed to determine monthly mass of the input or output. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. numOfMonthsMissingProcedureUsed K K013 Annual methane emissions from the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 K K014 You have not yet added an input for this furnace. inputList K K015 You have not yet added an output for this furnace. outputList K K016 You have selected Subpart K for reporting, but you have not yet added a furnace. none K K022 The procedure used to develop substitute data for monthly mass. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherProcedureForSubstituteData K K030 Annual production of Ferrochromium product (tons). You must enter a value that is greater than or equal to zero. ferroChromium K K031 Annual production of Ferromanganese product (tons). You must enter a value that is greater than or equal to zero. ferromanganese K K032 Annual production of Ferromolybdenum product (tons). You must enter a value that is greater than or equal to zero. ferromolybdenum K K033 Annual production of Ferronickel product (tons). You must enter a value that is greater than or equal to zero. ferronickel K K034 Annual production of Ferrosilicon product (tons). You must enter a value that is greater than or equal to zero. ferrosilicon K K035 Annual production of Ferrotitanium product (tons). You must enter a value that is greater than or equal to zero. ferrotitanium K K036 Annual production of Ferrotungsten product (tons). You must enter a value that is greater than or equal to zero. ferrotungsten K K037 Annual production of Ferrovanadium product (tons). You must enter a value that is greater than or equal to zero. ferrovanadium K K038 Annual production of Silicomanganese product (tons). You must enter a value that is greater than or equal to zero. silicomanganese K K039 Annual production of Silicon Metal product (tons). You must enter a value that is greater than or equal to zero. siliconmetal K K040 Annual production of Ferrochromium product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrochromiumCheck K K041 Annual production of Ferromanganese product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferromanganeseCheck K K042 Annual production of Ferromolybdenum product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferromolybdenumCheck K K043 Annual production of Ferronickel product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferronickelCheck K K044 Annual production of Ferrosilicon product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrosiliconCheck K K045 Annual production of Ferrotitanium product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrotitaniumCheck K K046 Annual production of Ferrotungsten product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrotungstenCheck K K047 Annual production of Ferrovanadium product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. ferrovanadiumCheck K K048 Annual production of Silicomanganese product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. silicomanganeseCheck K K049 Annual production of Silicon Metal product (tons). This data element is required, however you may uncheck the checkbox if this ferroalloy product is not produced by this electric arc furnace. siliconmetalCheck K K050 You have not provided the annual production quantity (tons) of at least one ferroalloy product produced by this electric arc furnace. ferrochromiumCheck K UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName K UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType L GHG-ADD-2 The greenhouse gas you are attempting to add is invalid because it already exists on the selection list provided. Please enter a unique greenhouse gas, or click CANCEL. ghgExisting L IVT-L0064 Batch or Continuous? The data element at row {1} must be either \'Batch\' or \'Continuous\' batchOrContinuous L IVT-L0068 You have indicated that facility emissions include one or more major F-GHG constituents of a fluorinated gas product that is sold or transferred to another person (Introduction tab, cell L14), but you have not included any F-GHGs where the answer to \'Is the F-GHG a Major Constituent of a product that is sold or transferred to another person?\' is \'Yes\' (Production Transformation tab, Part 3). You must correct this discrepancy. transientData['isFGhgMajor'] L L0019 You have not yet entered F-GHG facility summary information for this fluorinated gas production facility. transientData['reportingYear'] L L0020 Did the facility produce only one fluorinated gas product, including fluorinated gas products that are intermediates? This data element is required. onlyOneProductProduced L L0021 Did facility emissions include one or more major F-GHG constituents of a Fluorinated gas product that is sold or transferred to another person? This data element is required. majorFghgConstituents L L0023 Did the facility destroy previously produced fluorinated GHGs in destruction processes that are not part of a fluorinated gas production process or fluorinated gas transformation process? This data element is required. otherDestructionProcesses L L0024 Did the facility vent residual fluorinated GHGs from containers? This data element is required. ventFromContainers L L0026 Unique Process Name/Identifier. This data element is required. processName L L0027 Unique Process Name/Identifier. The same name or identifier already exists for this facility. processName L L0028 Process Type. This data element is required. processType L L0051 Were the annual emissions from process vents based on a missing data procedure? This data element is required. processVentEmissionsBasedOnMissingData L L0052 Data element for which missing data procedures were used, and the reason for the missing data. This data element is required. processVentMissingDataReason L L0053 Number of hours a missing data procedure was used to determine F-GHG emissions. This data element is required. processVentMissingDataHours L L0054 Provide the method used to estimate the missing data. This data element is required. processVentMissingDataMethod L L0055 If the data element is reportable under subpart L, provide estimates of missing data. This data element is required. If the data element is not reportable enter \'NA\' processVentMissingDataEstimates L L0057 Were the annual emissions from equipment leaks based on a missing data procedure? This data element is required. equipmentLeakEmissionsBasedOnMissingData L L0058 Data element for which missing data procedures were used, and the reason for the missing data. This data element is required. equipmentLeakMissingDataReason L L0059 Number of hours a missing data procedure was used to determine F-GHG emissions. This data element is required. equipmentLeakMissingDataHours L L0060 Provide the method used to estimate the missing data. This data element is required. equipmentLeakMissingDataMethod L L0061 If the data element is reportable under subpart L, provide estimates of missing data. This data element is required. If the data element is not reportable enter \'NA\' equipmentLeakMissingDataEstimates L L0063 Characterize the process. This data element is required. distillation L L0066 You have not yet added any f-GHG groups for this process. processFghgGroupDataMap L L0074 Number of hours a missing data procedure was used to determine F-GHG emissions. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. processVentMissingDataHours L L0076 Number of hours a missing data procedure was used to determine F-GHG emissions. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. equipmentLeakMissingDataHours L L0081 For this generically-identified process, report the methods used to determine the mass emissions of each fluorinated GHG group emitted from equipment leaks. You must select at least one check box. averageEfApproach L L0520 Was the container information based on a missing data procedure? This data element is required. containerBasedOnMissingData L L0521 Data element for which missing data procedures were used, and the reason for the missing data. This data element is required. containerMissingDataReason L L0522 Number of hours a missing data procedure was used to determine F-GHG emissions from container. This data element is required. containerMissingDataHours L L0523 Number of hours a missing data procedure was used to determine F-GHG emissions from container. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. containerMissingDataHours L L0524 Provide the method used to estimate the missing data. This data element is required. containerMissingDataMethod L L0525 If the data element is reportable under subpart L, provide estimates of missing data. This data element is required. If the data element is not reportable enter \'NA\' containerMissingDataEstimates LL LL001 Annual mass of carbon dioxide. This data element is required. officialUnroundedCo2 LL LL002 Annual mass of carbon dioxide. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 LL LL005 You have not uploaded a reporting form file. jctSubPartFacility MM ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] MM ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] MM MM0001 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID MM MM0002 Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod MM MM0003 Type of Facility. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/SubpartMMFacilityDataDetails/FacilityType facilityType MM MM0035 For refineries, select "In" if the product is entering the refinery or "Out" if the product is leaving the refinery. For importers and exporters, select "Import" if the product is being imported or "Export" if the product is being exported. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/IsCalculationMethod2Used isProductEnteringOrLeavingFacility MM MM0038 Select the product name code. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/IsCalculationMethod2Used productNameCode MM MM0048 Select the units for the measured quantity. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/NumberOfSamples measuredQuantityUnits MM MM0050 Enter the product annual quantity. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/SamplingStandardMethodUsed productAnnualQuantity Include the specified Xpath with the <ProductAnnualQuantity> provided with a non-null value. MM MM0067 A negative value for Product Annual Quantity was entered. A negative product annual quantity may not be entered in this field. Please correct this error and resubmit. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/CarbonShare productAnnualQuantity Include the specified Xpath with the <ProductAnnualQuantity> provided with a non-null value. MM MM0068 0 was entered for the product annual quantity. This form must not be submitted for products where the annual product quantity is zero. If the annual product quantity for the above product(s) was not zero, then you must make the appropriate corrections and resubmit. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/CarbonShareTestMethodUsed productAnnualQuantity MM MM0069 Enter the percent of the product that is petroleum based. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/CalculatedCarbonDioxideQuantityEmissionFactor percentPetroleumBased MM MM0071 Enter the Annual CO2 Quantity in Metric Tons. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/CalculatedCarbonDioxideQuantityEmissionFactorUnits annualCo2Quantity Include the specified Xpath with the <AnnualCarbonDioxideQuantity> provided with a non-null value. MM MM0076 A negative value for Annual CO2 Quantity was entered. A negative annual CO2 quantity may not be entered in this field. Please correct this error and resubmit. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/DensityTestResults annualCo2Quantity Include the specified Xpath with the <AnnualCarbonDioxideQuantity> provided with a non-null value. MM MM0077 0 was entered for the Annual CO2 Quantity. This form must not be submitted for products where the annual product quantity is zero. If the annual product quantity for the above product(s) was not zero, then you must make the appropriate corrections and resubmit. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/AggregateProductsDetails/AggregateProductsTableDetails/AggregateProductsRowDetails/DensityTestMethodUsed annualCo2Quantity MM MM0078 Select "Yes" or "No" for whether Calculation Method 2 was used for this product. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/CarbonDioxideQuantitySum isCalculationMethod2Used MM MM0079 Select "Yes" or "No" for whether Calculation Method 2 was used for this product. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/CarbonDioxideQuantitySum isCalculationMethod2Used MM MM0080 Enter the number of samples collected for use in Calculation Methodology 2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/BulkNaturalGasLiquidsQuantity numberOfSamples MM MM0082 Enter sampling standard method used for Calculation Method 2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/BulkNaturalGasLiquidsQuantityUnits samplingStandardMethodUsed MM MM0084 Enter the carbon share test results (mass %) for Calculation Method 2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/CrudeOilInjected carbonShare MM MM0086 Enter standard method used to test carbon share for Calculation Method 2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/IsProductEnteringOrLeavingFacility carbonShareTestMethodUsed MM MM0088 Enter CO2 emission factor for Calculation Method 2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/BlendedProductName calculatedCo2QuantityEmissionFactor MM MM0091 Enter unit of measure for the emission factor for Calculation Method 2: metric tons CO2 per barrel (MT CO2/BBL), or metric tons CO2 per metric ton (MT CO2/MT) of product. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductComponentsTableDetails/BlendedProductComponentsRowDetails/BlendedProductIdentifier calculatedCo2QuantityEmissionFactorUnits MM MM0093 Enter the density test results in units of metric tons per barrel for Calculation Method 2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/AnnualCarbonDioxideQuantity densityTestResults MM MM0095 Enter the standard method used to test density for Calculation Method 2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/TotalNumberOfBlendedComponents densityTestMethodUsed MM MM0098 Enter a value for the Sum of CO2 Quantity for All Products - Refinery. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/BlendedProductIdentifier co2QuantitySum Include the specified Xpath with the <CarbonDioxideQuantitySum> provided with a non-null value. MM MM0099 Enter a value for the Sum of CO2 Quantity for All Products - Importer. This data element is required if your are an importer/exporter. You should enter zero if you have not imported. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductComponentsTableDetails/BlendedProductComponentsRowDetails/BlendingComponentNumber co2QuantitySum MM MM0100 Enter a value for the Sum of CO2 Quantity for All Products - Exporter. This data element is required if your are an importer/exporter. You should enter zero if you have not exported. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductsTableDetails/BlendedProductsRowDetails/TotalNumberOfBlendedComponents co2QuantitySum MM MM0105 Quantity of Bulk Natural Gas Liquids Received for Processing. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductComponentsTableDetails/BlendedProductComponentsRowDetails/BlendingComponentNameCode bulkNaturalGasLiquidsQuantity MM MM0107 Enter the units for the Quantity of Bulk Natural Gas Liquids. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/BlendedProductsDetails/BlendedProductComponentsTableDetails/BlendedProductComponentsRowDetails/BlendingComponentQuantityUnits bulkNaturalGasLiquidsQuantityUnits MM MM0111 Enter quantity of crude oil (in barrels) injected into a crude oil supply or reservoir. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/TotalCarbonDioxideQuantityDetails/TotalCarbonDioxideQuantityTableDetails/TotalCarbonDioxideQuantityRowDetails/CrudeOilEnteringRefinery crudeOilInjected MM MM0116 Select whether the product is entering the facility or leaving the facility. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FractionOfGasSent isProductEnteringOrLeavingFacility MM MM0119 Enter the Blended Product Name. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareCombustionEfficiency blendedProductName MM MM0120 Enter a unique identifier for the blended product(s). This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareFeedGasCH4MoleFraction blendedProductIdentifier MM MM0121 Enter annual CO2 emissions in metric tons (MT) that would result from complete combustion or oxidation of the blended product(s). This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareFeedGasCO2MoleFraction annualCo2Quantity MM MM0127 Enter the total number of blending components for product(s). This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/Ch4Emissions totalNumberOfBlendedComponents MM MM0129 A unique identifier was not provided for one or more components of blended products. Select a unique identifier for each component of each blended product. Each ID for a component of a blended product must match a blended product ID from the Blended Products table. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/Ch4Emissions blendedProductIdentifier MM MM0132 Enter a unique identifier for each blending component, numbered sequentially. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingQuarters blendingComponentNumber MM MM0133 Total Number of Blending Components. The total number of blending components reported in Table 1 on the "Blended Products" tab for this Blended Product ID is not consistent with the total number of blended product components reported in Table 2 on the "Blended Products" tab for the same Blended Product ID. You must correct this before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingHours totalNumberOfBlendedComponents MM MM0134 The Blending Component Name Code is missing for one or more components in the Components of Blended Products Table. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/EorInjectionMissingDataProcUsedDetails/EorInjectionMissingDataProcUsedRowDetails/MissingQuarters blendingComponentNameCode MM MM0136 Enter the blending component quantity units. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/EorInjectionMissingDataProcUsedDetails/EorInjectionMissingDataProcUsedRowDetails/MissingHours blendingComponentQuantityUnits MM MM0138 Enter the quantity of the blending component in units specified. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/UniqueInjectionPumpBlowdownsDetails/UniqueInjectionPumpBlowdownsRowDetails/PumpCapacity blendingComponentQuantity MM MM0165 The FacilityDataDetails node is required. The submitted XML omits this node. facilityData MM MM0166 The AggregateProductsDetails node is required. The submitted XML omits this node. aggregateProductsData MM MM0167 The TotalCarbonDioxideQuantityDetails node is required. The submitted XML omits this node. totalCo2QuantityData MM MM0182 You have indicated that you are reporting optional procedures for blended products however you have left the Blended Products table blank. If you are reporting optional procedures for blended products you must complete both the Blended Products table and the Blending Components table. GHG/FacilitySiteDetails/ SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/ BlendedProductsTableDetails/ BlendedProductsRowDetails/UniqueIdentifier table1Data[1] if GHG/FacilitySiteDetails/ SubPartInformation/SubPartMM/SubPartMMReportingFormsDetail/ AggregateProductsDetails/ ReportingOptionalProceduresForBlendedProducts = "Yes" then the specified Xpath must be included with at least one instance of a non-null <UniqueIdentifier> MM MM0183 You have indicated that you are reporting optional procedures for blended products however you have left the Blending Components table blank. If you are reporting optional procedures for blended products you must complete both the Blended Products table and the Blending Components table. GHG/FacilitySiteDetails/ SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/ BlendedProductsTableDetails/ BlendedProductComponentsTableDetails/ BlendedProductComponentsRowDetails/UniqueIdentifier table2Data[1] if GHG/FacilitySiteDetails/ SubPartInformation/SubPartMM/SubPartMMReportingFormsDetails/ AggregateionProductsDetails/ ReportingOptionalProceduresForBlendedProducts = "Yes" then the specified Xpath must be included with at least one instance of a non-null <UniqueIdentifier> MM MM0191 Percent Petroleum Based. It appears that the value you entered in the reporting form is not being processed as a percent. If you are using an Older MM reporting form (created before 10/19/2016), you will need to add a percent sign after the value entered for it to be interpreted as a percent. percentPetroleumBased MM MM0192 Carbon Share (mass %). It appears that the value you entered in the reporting form is not being processed as a percent. If you are using an Older MM reporting form (created before 10/19/2016), you will need to add a percent sign after the value entered for it to be interpreted as a percent. carbonShare MM MM0193 Number of Samples. The number of samples reported on the "Aggregate Products" tab must be greater than zero because you have indicated that Calculation Method 2 was used for this product. You must correct the current value before continuing. numberOfSamples MM MM1000 You have selected Subpart MM for reporting, but you have not yet uploaded a reporting form file. none N CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML N CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits N CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml N CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions N CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs N CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt N CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow N CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture N CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow N CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits N CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions N CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission N CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission N CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission N CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission N CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> N CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 N CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs N CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt N CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate N CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate N CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType N CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate N CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] N CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] N CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] N CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] N CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] N CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] N CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] N CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] N CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName N CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted N CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission N CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission N CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted N CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions N CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate N CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate N CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate N CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate N N001 Annual quantity of limestone charged to all furnaces. This data element is required. If limestone was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfLimeStone N N002 Annual quantity of limestone charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfLimeStone N N004 Annual quantity of dolomite charged to all furnaces. This data element is required. If dolomite was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfDolomite N N005 Annual quantity of dolomite charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfDolomite N N007 Annual quantity of sodium carbonate charged to all furnaces. This data element is required. If sodium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfSodiumCarbonate N N008 Annual quantity of sodium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfSodiumCarbonate N N010 Annual quantity of barium carbonate charged to all furnaces. This data element is required. If barium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfBariumCarbonate N N011 Annual quantity of barium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfBariumCarbonate N N012 Annual quantity of potassium carbonate charged to all furnaces. This data element is required. If potassium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfPotassiumCarbonate N N013 Annual quantity of potassium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfPotassiumCarbonate N N014 Annual quantity of lithium carbonate charged to all furnaces. This data element is required. If lithium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfLithiumCarbonate N N015 Annual quantity of lithium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfLithiumCarbonate N N016 Annual quantity of strontium carbonate charged to all furnaces. This data element is required. If strontium carbonate was not charged to any furnaces at your facility during the reporting year, please enter zero. aggregatedQuantityOfStrontiumCarbonate N N017 Annual quantity of strontium carbonate charged to all furnaces. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. aggregatedQuantityOfStrontiumCarbonate N N018 Please make a selection or click CANCEL. hasCEMS N N019 Annual quantity of glass produced by the furnace. This data element is required. annualQuantity N N020 Annual quantity of glass produced by the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualQuantity N N022 Selection of at least one raw material type is required for each furnace. Please select one or more raw material types or click CANCEL. selectedFuelIDs N N023 Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of limestone. This data element is required. fuelDTOsMap['limestone'].m_monthsOfMissingdataProc N N024 The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of limestone. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['limestone'].m_monthsOfMissingdataProc N N025 Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of limestone. This data element is required. fuelDTOsMap['limestone'].mf_monthsOfMissingdataProc N N026 The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of limestone. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['limestone'].mf_monthsOfMissingdataProc N N027 Method used to determine the fraction of calcination for limestone. This data element is required. fuelDTOsMap['limestone'].f_method N N028 Method used to determine the fraction of calcination for limestone. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['limestone'].f_methodOther N N029 Mass fraction verification test data for limestone. These data elements are required. fuelDTOsMap['limestone'].mf_testDetails N N030 Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of dolomite. This data element is required. fuelDTOsMap['dolomite'].m_monthsOfMissingdataProc N N031 The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of dolomite. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['dolomite'].m_monthsOfMissingdataProc N N032 Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of dolomite. This data element is required. fuelDTOsMap['dolomite'].mf_monthsOfMissingdataProc N N033 The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of dolomite. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['dolomite'].mf_monthsOfMissingdataProc N N034 Method used to determine the fraction of calcination for dolomite. This data element is required. fuelDTOsMap['dolomite'].f_method N N035 Method used to determine the fraction of calcination for dolomite. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['dolomite'].f_methodOther N N036 Mass fraction verification test data for dolomite. These data elements are required. fuelDTOsMap['dolomite'].mf_testDetails N N037 Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of sodium carbonate. This data element is required. fuelDTOsMap['sodium_carbonate'].m_monthsOfMissingdataProc N N038 The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of sodium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['sodium_carbonate'].m_monthsOfMissingdataProc N N039 Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of sodium carbonate. This data element is required. fuelDTOsMap['sodium_carbonate'].mf_monthsOfMissingdataProc N N040 The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of sodium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['sodium_carbonate'].mf_monthsOfMissingdataProc N N041 Method used to determine the fraction of calcination for sodium carbonate. This data element is required. fuelDTOsMap['sodium_carbonate'].f_method N N042 Method used to determine the fraction of calcination for sodium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['sodium_carbonate'].f_methodOther N N043 Mass fraction verification test data for sodium carbonate. These data elements are required. fuelDTOsMap['sodium_carbonate'].mf_testDetails N N044 Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of barium carbonate. This data element is required. fuelDTOsMap['barium_carbonate'].m_monthsOfMissingdataProc N N045 The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of barium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['barium_carbonate'].m_monthsOfMissingdataProc N N046 Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of barium carbonate. This data element is required. fuelDTOsMap['barium_carbonate'].mf_monthsOfMissingdataProc N N047 The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of barium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['barium_carbonate'].mf_monthsOfMissingdataProc N N048 Method used to determine the fraction of calcination for barium carbonate. This data element is required. fuelDTOsMap['barium_carbonate'].f_method N N049 Method used to determine the fraction of calcination for barium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['barium_carbonate'].f_methodOther N N050 Mass fraction verification test data for barium carbonate. These data elements are required. fuelDTOsMap['barium_carbonate'].mf_testDetails N N051 Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of potassium carbonate. This data element is required. fuelDTOsMap['potassium_carbonate'].m_monthsOfMissingdataProc N N052 The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of potassium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['potassium_carbonate'].m_monthsOfMissingdataProc N N053 Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of potassium carbonate. This data element is required. fuelDTOsMap['potassium_carbonate'].mf_monthsOfMissingdataProc N N054 The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of potassium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['potassium_carbonate'].mf_monthsOfMissingdataProc N N055 Method used to determine the fraction of calcination for potassium carbonate. This data element is required. fuelDTOsMap['potassium_carbonate'].f_method N N056 Method used to determine the fraction of calcination for potassium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['potassium_carbonate'].f_methodOther N N057 Mass fraction verification test data for potassium carbonate. These data elements are required. fuelDTOsMap['potassium_carbonate'].mf_testDetails N N058 Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of lithium carbonate. This data element is required. fuelDTOsMap['lithium_carbonate'].m_monthsOfMissingdataProc N N059 The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of lithium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['lithium_carbonate'].m_monthsOfMissingdataProc N N060 Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of lithium carbonate. This data element is required. fuelDTOsMap['lithium_carbonate'].mf_monthsOfMissingdataProc N N061 The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of lithium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['lithium_carbonate'].mf_monthsOfMissingdataProc N N062 Method used to determine the fraction of calcination for lithium carbonate. This data element is required. fuelDTOsMap['lithium_carbonate'].f_method N N063 Method used to determine the fraction of calcination for lithium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['lithium_carbonate'].f_methodOther N N064 Mass fraction verification test data for lithium carbonate. These data elements are required. fuelDTOsMap['lithium_carbonate'].mf_testDetails N N065 Number of months in the reporting year that missing data procedures were followed to measure monthly quantity of strontium carbonate. This data element is required. fuelDTOsMap['strontium_carbonate'].m_monthsOfMissingdataProc N N066 The number of months in the reporting year that missing data procedures were followed to measure a monthly quantity of strontium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['strontium_carbonate'].m_monthsOfMissingdataProc N N067 Number of months in the reporting year that missing data procedures were followed to measure monthly mass fraction of strontium carbonate. This data element is required. fuelDTOsMap['strontium_carbonate'].mf_monthsOfMissingdataProc N N068 The number of months in the reporting year that missing data procedures were followed to measure a monthly mass fraction of strontium carbonate. This value should be reported as a number and should be within the range of 0 to 12 months. The value you provided is outside that range. You must correct the current value before continuing. fuelDTOsMap['strontium_carbonate'].mf_monthsOfMissingdataProc N N069 Method used to determine the fraction of calcination for strontium carbonate. This data element is required. fuelDTOsMap['strontium_carbonate'].f_method N N070 Method used to determine the fraction of calcination for strontium carbonate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['strontium_carbonate'].f_methodOther N N071 Mass fraction verification test data for strontium carbonate. These data elements are required. fuelDTOsMap['strontium_carbonate'].mf_testDetails N N075 Mass fraction verification test date. This data element is required. testDate N N077 The mass fraction of the sample. This data element is required. samples[0] N N078 The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[0] N N079 The mass fraction of the sample. This data element is required. samples[1] N N080 The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[1] N N081 The mass fraction of the sample. This data element is required. samples[2] N N082 The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[2] N N083 The mass fraction of the sample. This data element is required. samples[3] N N084 The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[3] N N085 The mass fraction of the sample. This data element is required. samples[4] N N086 The mass fraction of the sample, expressed as a decimal fraction, should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. samples[4] N N088 The method (and any variations) used to determine the mass fraction for limestone. This data element is required. fuelDTOsMap['limestone'].a_method N N089 The method (and any variations) used to determine the mass fraction for limestone. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['limestone'].a_methodTest N N090 The method (and any variations) used to determine the mass fraction for dolomite. This data element is required. fuelDTOsMap['dolomite'].a_method N N091 The method (and any variations) used to determine the mass fraction for dolomite. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['dolomite'].a_methodTest N N092 The method (and any variations) used to determine the mass fraction for sodium carbonate. This data element is required. fuelDTOsMap['sodium_carbonate'].a_method N N093 The method (and any variations) used to determine the mass fraction for sodium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['sodium_carbonate'].a_methodTest N N094 The method (and any variations) used to determine the mass fraction for barium carbonate. This data element is required. fuelDTOsMap['barium_carbonate'].a_method N N095 The method (and any variations) used to determine the mass fraction for barium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['barium_carbonate'].a_methodTest N N096 The method (and any variations) used to determine the mass fraction for potassium carbonate. This data element is required. fuelDTOsMap['potassium_carbonate'].a_method N N097 The method (and any variations) used to determine the mass fraction for potassium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['potassium_carbonate'].a_methodTest N N098 The method (and any variations) used to determine the mass fraction for lithium carbonate. This data element is required. fuelDTOsMap['lithium_carbonate'].a_method N N099 The method (and any variations) used to determine the mass fraction for lithium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['lithium_carbonate'].a_methodTest N N100 The method (and any variations) used to determine the mass fraction for strontium carbonate. This data element is required. fuelDTOsMap['strontium_carbonate'].a_method N N101 The method (and any variations) used to determine the mass fraction for strontium carbonate. You selected "Test Method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelDTOsMap['strontium_carbonate'].a_methodTest N N200 Annual quantity of limestone charged to furnace (tons). This data element is required. cemsFuelDTOsMap['limestone'].annualQuantityCharged N N201 Annual quantity of dolomite charged to furnace (tons). This data element is required. cemsFuelDTOsMap['dolomite'].annualQuantityCharged N N202 Annual quantity of sodium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['sodium_carbonate'].annualQuantityCharged N N203 Annual quantity of barium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['barium_carbonate'].annualQuantityCharged N N204 Annual quantity of potassium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['potassium_carbonate'].annualQuantityCharged N N205 Annual quantity of lithium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['lithium_carbonate'].annualQuantityCharged N N206 Annual quantity of strontium carbonate charged to furnace (tons). This data element is required. cemsFuelDTOsMap['strontium_carbonate'].annualQuantityCharged N N207 You have selected Subpart N for reporting, but you have not yet added a furnace. groupUnit N N504 You indicated that a unit [{1}] is monitored by CEMS, but you have not associated it with any CEMS Monitoring Locations (CMLs). From the Subpart N Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. Please address this critical error. Then you can return here to perform another final review and submit your report. data[monitored] N UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName N UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType NN ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] NN ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] NN NN001 Supplier Type. This data element is required. supplierCategory NN NN002 Natural gas delivered to Residential consumers. This data element is required. Please enter the required data. subPartNNEndUsesLDC.volumeResidentialConsumers NN NN003 Residential consumers. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. subPartNNEndUsesLDC.volumeResidentialConsumers NN NN005 Natural gas delivered to Commercial consumers. This data element is required. Please enter the required data. subPartNNEndUsesLDC.volumeCommercialConsumers NN NN006 Commercial consumers. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. subPartNNEndUsesLDC.volumeCommercialConsumers NN NN008 Natural gas delivered to Industrial consumers. This data element is required. Please enter the required data. subPartNNEndUsesLDC.volumeIndustrialConsumers NN NN009 Industrial consumers. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. subPartNNEndUsesLDC.volumeIndustrialConsumers NN NN011 Natural gas delivered to Electricity generating facilities. This data element is required. Please enter the required data. subPartNNEndUsesLDC.volumeGeneratingFacs NN NN012 Electricity generating facilities. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. subPartNNEndUsesLDC.volumeGeneratingFacs NN NN014 Annual Volume of Natural Gas received for processing. This data element is required. Please enter the required data. subPartNNMiscInfoNGL.naturalGasReceived NN NN015 Annual Volume of Natural Gas received for processing. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. subPartNNMiscInfoNGL.naturalGasReceived NN NN019 Annual quantity of Propane odorized at the facility and delivered to others. This data element is required. Please enter the required data. subPartNNMiscInfoNGL.propaneDelivered NN NN020 Annual quantity of Propane odorized at the facility and delivered to others. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. subPartNNMiscInfoNGL.propaneDelivered NN NN022 Supplier Type. This data element is required. supplierCategory NN NN023 Total annual volume of natural gas received at the city gate(s). This data element is required. fuelVolumeNN1_NN2.fuelVolume NN NN024 Total annual volume of natural gas received at the city gate(s). You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.fuelVolume NN NN026 Days in reporting year for which substitute data procedures were used. This data element is required. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed NN NN027 Number of days in the reporting year for which missing data procedures were used. This value should be within the range of 0 to 365 days (or 366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed NN NN029 Industry standard used to measure the volume. This data element is required. fuelVolumeNN1_NN2.standardOfMeasure NN NN030 Industry standard used to measure the volume. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelVolumeNN1_NN2.standardOfMeasureOtherDesc NN NN031 Total annual volume of product supplied. This data element is required. fuelVolumeNN1_NN2.fuelVolume NN NN032 Total annual volume of product supplied. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.fuelVolume NN NN038 Days in reporting year for which substitute data procedures were used. This data element is required. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed NN NN039 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (or 366 days for a leap year). The value you provided is outside this range. You must correct the value before submitting your report. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed NN NN041 Industry standard used to measure the volume. This data element is required. fuelVolumeNN1_NN2.standardOfMeasure NN NN042 Industry standard used to measure the volume. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelVolumeNN1_NN2.standardOfMeasureOtherDesc NN NN043 Higher heating value. This data element is required. Please enter the required data. hhv.hhvValue NN NN044 Higher heating value. You must enter a value that is greater than or equal to zero. You must correct the value before submitting your report. hhv.hhvValue NN NN046 Higher heating value. This data element is required. Please enter the required data or click CANCEL. hhv.hhvValue NN NN047 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. hhv.daysSubstituteDataProceduresUsed NN NN048 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. hhv.daysSubstituteDataProceduresUsed NN NN050 Industry standard used to measure Higher Heating Value. This data element is required. hhv.standardOfDevelopment NN NN051 Industry standard used to measure Higher Heating Value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. hhv.standardOfDevelopmentOtherDesc NN NN052 CO2 Emissions Factor. This data element is required. Please enter the required data. ef1.efValue NN NN053 CO2 Emissions Factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef1.efValue NN NN055 CO2 emissions factor. This data element is required. Please enter the required data or click CANCEL. ef1.isReporterSpecific NN NN056 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef1.daysSubstituteDataProceduresUsed NN NN057 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. ef1.daysSubstituteDataProceduresUsed NN NN059 Industry standard used to measure CO2 emissions factor. This data element is required. ef1.standardOfDevelopment NN NN060 Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef1.standardOfDevelopmentOtherDesc NN NN061 Higher heating value. This data element is required. Please enter the required data. hhv.hhvValue NN NN062 Higher heating value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. hhv.hhvValue NN NN068 Higher heating value. This data element is required. Please enter the required data or click CANCEL. hhv.hhvValue NN NN069 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. hhv.daysSubstituteDataProceduresUsed NN NN070 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. hhv.daysSubstituteDataProceduresUsed NN NN072 Industry standard used to measure Higher Heating Value. This data element is required. hhv.standardOfDevelopment NN NN073 Industry standard used to measure Higher Heating Value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. hhv.standardOfDevelopmentOtherDesc NN NN074 CO2 Emissions Factor. This data element is required. Please enter the required data. ef1.efValue NN NN075 CO2 Emissions Factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef1.efValue NN NN081 CO2 emissions factor. This data element is required. Please enter the required data or click CANCEL. ef1.isReporterSpecific NN NN082 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef1.daysSubstituteDataProceduresUsed NN NN083 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. ef1.daysSubstituteDataProceduresUsed NN NN085 Industry standard used to measure CO2 emissions factor. This data element is required. ef1.standardOfDevelopment NN NN086 Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef1.standardOfDevelopmentOtherDesc NN NN087 CO2 quantities associated with Natural Gas Received at the City Gate(s). This data element is required. co2iEmissions.officialUnroundedCo2 NN NN088 CO2 quantities associated with Natural Gas Received at the City Gate(s). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2iEmissions.officialUnroundedCo2 NN NN089 What result do you want to report to EPA? This data element is required. Please make a selection or click CANCEL. co2iEmissions.isUserOverriddenCo2 NN NN090 What result do you want to report to EPA?. This data element is required. Please make a selection or click CANCEL. co2iEmissions.isUserOverriddenCo2 NN NN091 You selected "Enter my own result" but did not enter a value. Either enter a value or select "Use the calculated result rounded". co2iEmissions.officialUnroundedCo2 NN NN092 Report this value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2iEmissions.officialUnroundedCo2 NN NN093 Total annual volume of product received at the city gate(s). This data element is required. fuelVolumeNN1_NN2.fuelVolume NN NN094 Total annual volume of product received at the city gate(s). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolumeNN1_NN2.fuelVolume NN NN096 Days in reporting year for which substitute data procedures were used. This data element is required. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed NN NN097 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed NN NN099 Industry standard used to measure the volume. This data element is required. fuelVolumeNN1_NN2.standardOfMeasure NN NN100 Industry standard used to measure the volume. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelVolumeNN1_NN2.standardOfMeasureOtherDesc NN NN101 Total annual volume of product supplied. This data element is required. fuelVolumeNN1_NN2.fuelVolume NN NN102 Total annual volume of product supplied. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolumeNN1_NN2.fuelVolume NN NN108 Days in reporting year for which substitute data procedures were used. This data element is required. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed NN NN109 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. fuelVolumeNN1_NN2.daysSubstituteDataProceduresUsed NN NN111 Industry standard used to measure the volume. This data element is required. fuelVolumeNN1_NN2.standardOfMeasure NN NN112 Industry standard used to measure the volume. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. fuelVolumeNN1_NN2.standardOfMeasureOtherDesc NN NN113 CO2 emissions factor. This data element is required. Please enter the required data. ef2.efValue NN NN114 CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef2.efValue NN NN116 Emission Factor. This data element is required. Please enter the required data. ef2.isReporterSpecific NN NN117 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef2.daysSubstituteDataProceduresUsed NN NN118 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. ef2.daysSubstituteDataProceduresUsed NN NN120 Industry standard used to measure CO2 emissions factor. This data element is required. ef2.standardOfDevelopment NN NN121 Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef2.standardOfDevelopmentOtherDesc NN NN122 CO2 emissions factor. This data element is required. Please enter the required data. ef2.efValue NN NN123 CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef2.efValue NN NN129 Emission Factor. This data element is required. Please enter the required data or click CANCEL. ef2.isReporterSpecific NN NN130 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef2.daysSubstituteDataProceduresUsed NN NN131 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. ef2.daysSubstituteDataProceduresUsed NN NN133 Industry standard used to measure CO2 emissions factor. This data element is required. ef2.standardOfDevelopment NN NN134 Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef2.standardOfDevelopmentOtherDesc NN NN135 What result do you want to report to EPA?. This data element is required. Please make a selection or click CANCEL. co2iEmissions.isUserOverriddenCo2 NN NN136 CO2 quantities associated with Natural Gas Received at the City Gate(s). This data element is required. co2iEmissions.officialUnroundedCo2 NN NN137 CO2 quantities associated with Natural Gas Received at the City Gate(s). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2iEmissions.officialUnroundedCo2 NN NN138 What result do you want to report to EPA?. This data element is required. Please make a selection or click CANCEL. co2iEmissions.isUserOverriddenCo2 NN NN139 You selected "Enter my own result" but did not enter a value. Either enter a value or select "Use the calculated result rounded". co2iEmissions.officialUnroundedCo2 NN NN140 Report this value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2iEmissions.officialUnroundedCo2 NN NN141 Total annual volume of natural gas delivered to downstream pipelines and other LDCs. This data element is required. Please enter the required data. fuelVolumeNN3.fuelVolume NN NN142 Total annual volume of natural gas delivered to downstream pipelines and other LDCs. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolumeNN3.fuelVolume NN NN144 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. fuelVolumeNN3.daysSubstituteDataProceduresUsed NN NN145 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. fuelVolumeNN3.daysSubstituteDataProceduresUsed NN NN147 CO2 emissions factor. This data element is required. Please enter the required data. ef3.efValue NN NN148 CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef3.efValue NN NN150 EF. This data element is required. Please enter the required data or click CANCEL. ef3.isReporterSpecific NN NN151 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef3.daysSubstituteDataProceduresUsed NN NN152 Number of days in the reporting year for which substitute data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. ef3.daysSubstituteDataProceduresUsed NN NN154 Industry standard used to measure CO2 emissions factor. This data element is required. ef3.standardOfDevelopment NN NN155 Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef3.standardOfDevelopmentOtherDesc NN NN156 What result do you want to report to EPA? This data element is required. Please make a selection or click CANCEL. co2jEmissions.isUserOverriddenCo2 NN NN157 CO2 quantities associated with Natural Gas delivered to Transmission Pipelines or Other LDCs. This data element is required. co2jEmissions.officialUnroundedCo2 NN NN158 CO2 quantities associated with Natural Gas delivered to Transmission Pipelines or Other LDCs. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2jEmissions.officialUnroundedCo2 NN NN159 CO2 emissions factor. This data element is required. Please enter the required data. ef4.efValue NN NN160 CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef4.efValue NN NN162 EF. This data element is required. Please enter the required data or click CANCEL. ef4.isReporterSpecific NN NN163 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef4.daysSubstituteDataProceduresUsed NN NN164 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. ef4.daysSubstituteDataProceduresUsed NN NN166 Industry standard used to measure CO2 emissions factor. This data element is required. ef4.standardOfDevelopment NN NN167 Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef4.standardOfDevelopmentOtherDesc NN NN168 You selected "Enter my own result" but did not enter a value. Either enter a value or select "Use the calculated result rounded". co2kEmissions.officialUnroundedCo2 NN NN169 Report this value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2kEmissions.officialUnroundedCo2 NN NN170 What result do you want to report to EPA? This data element is required. Please make a selection or click CANCEL. co2kEmissions.isUserOverriddenCo2 NN NN171 Annual volume of natural gas delivered to a large end-user\'s facility or the amount delivered to a specific meter located at a large end-user\'s facility. This data element is required. Please enter the required data. fuelVolume.fuelVolume NN NN172 Annual volume of natural gas delivered to a large end-user\'s facility or the amount delivered to a specific meter located at a large end-user\'s facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolume.fuelVolume NN NN213 GHG Quantities Calculation Methodology. This data element is required. Please make a selection or click CANCEL. calculationMethodology NN NN214 Total annual volume of NGL product received. This data element is required. Please enter the required data. fuelVolumeNN7.fuelVolume NN NN215 Total annual volume of NGL product supplied. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. fuelVolumeNN7.fuelVolume NN NN221 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. fuelVolumeNN7.daysSubstituteDataProceduresUsed NN NN222 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the current value before submitting your report. fuelVolumeNN7.daysSubstituteDataProceduresUsed NN NN224 CO2 emissions factor. This data element is required. Please enter the required data. ef7.efValue NN NN225 CO2 emissions factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ef7.efValue NN NN231 EF. This data element is required. Please enter the required data or click CANCEL. ef7.isReporterSpecific NN NN232 Days in reporting year for which substitute data procedures were used. This data element is required. Please enter the required data. ef7.daysSubstituteDataProceduresUsed NN NN233 Number of days in the reporting year for which missing data procedures were used. This value should be between 0 and 365 days (366 days for leap years). The value you provided is outside this range. You must correct the value before submitting your report. ef7.daysSubstituteDataProceduresUsed NN NN235 Industry standard used to measure CO2 emissions factor. This data element is required. ef7.standardOfDevelopment NN NN236 Industry standard used to measure CO2 emissions factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. ef7.standardOfDevelopmentOtherDesc NN NN237 What result do you want to report to EPA?. This data element is required. Please make a selection or click CANCEL. co2mEmissions.isUserOverriddenCo2 NN NN238 You selected "Enter my own result" but did not enter a value. Either enter a value or select "Use the calculated result rounded". co2mEmissions.officialUnroundedCo2 NN NN239 Report this value. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2mEmissions.officialUnroundedCo2 NN NN240 GHG Emissions Calculation Methodology. This data element is required. Please make a selection or click CANCEL. calculationMethodology NN NN280 Large End-User Name. This data element is required. Please enter the required data or click CANCEL. customerName NN NN281 Large End-User Address. This data element is required. Please enter the required data. customerAddress NN NN282 Meter Number. This data element is required. Please enter the required data. meterNumber NN NN400 The annual GHG quantity for Subpart NN has not been reported. This data element is required pursuant to 40 CFR 98.3(c)(5)(ii). transientData['subpartNNAnnualCO2'] NN NN401 The annual GHG quantity for Subpart NN has not been reported. This data element is required pursuant to 40 CFR 98.3(c)(5)(ii). transientData['subpartNNAnnualCO2'] NN NN403 No NGL product has been reported for Subpart NN. nglProductMap['Ethane'] NN NN404 The name of a supplied NGL product has not been reported. This data element is required. suppliedFuelName NN NN405 The name of a received NGL product has not been reported. This data element is required. receivedFuelName NN NN407 The GHG {1} is not valid for Subpart NN. Please check the value you entered and correct before continuing. transientData['gasName'] NN NN410 More than one NGL fuel details have been reported for ethane. Please correct before continuing. transientData['ethaneSuppliedCount'] NN NN411 More than one NGL fuel details have been reported for butane. Please correct before continuing. transientData['butaneSuppliedCount'] NN NN412 More than one NGL fuel details have been reported for isobutane. Please correct before continuing. transientData['isobutaneSuppliedCount'] NN NN413 More than one NGL fuel details have been reported for propane. Please correct before continuing. transientData['propaneSuppliedCount'] NN NN414 More than one NGL fuel details have been reported for pentanes plus. Please correct before continuing. transientData['pentanesPlusSuppliedCount'] NN NN415 The CO2 units of measure of {1} for Subpart NN is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['co2UOM'] NN NN416 The units of measure for the GHG quantity calculated using Equation NN-1 for the NGL product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn1UOM_NGL'] NN NN417 The units of measure for the GHG quantity calculated using Equation NN-2 for the NGL product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn2UOM_NGL'] NN NN418 The units of measure for the GHG quantity calculated using Equation NN-7 for the NGL product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn7UOM'] NN NN419 The units of measure for the GHG quantity calculated using Equation NN-1 for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn1UOM_LDC'] NN NN420 The units of measure for the GHG quantity calculated using Equation NN-2 for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn2UOM_LDC'] NN NN421 The units of measure for the GHG quantity calculated using Equation NN-3 for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn3UOM'] NN NN422 The units of measure for the GHG quantity calculated using Equation NN-4 for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn4UOM'] NN NN423 The units of measure for the GHG quantity calculated using Equation NN-5a for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn5aUOM'] NN NN424 The units of measure for the GHG quantity calculated using Equation NN-5b for the LDC product is not valid. It should be Metric Tons. Please check the value you entered and correct before continuing. transientData['nn5bUOM'] NN NN425 The annual GHG quantity calculated using equation NN-5a for the LDC has not been reported. This data element is required. transientData['annualCo2FromEquationNN5a'] NN NN426 The annual GHG quantity calculated using equation NN-5b for the LDC has not been reported. This data element is required. transientData['annualCo2FromEquationNN5b'] NN NN470 US State or Territory covered in this report. This data element is required. Please enter the required data. transientData['stateTerritoryCovered'] NN NN600 You have not indicated your supplier type (natural gas local distribution company or fractionator of natural gas liquids). supplierCategory O IVT-O100a You have not added any equation inputs data for the annual mass of HCFC-22 produced. Please use the Inputs Verifier Tool to enter equation inputs for the annual mass of HCFC-22 produced for this process. systemCalculatedUnroundedAnnualMass O IVT-O101a You have not added any equation inputs data for the annual HFC-23 emissions from the Process (calculated using equation O-4). Please use the Inputs Verifier Tool to enter equation inputs for annual HFC-23 emissions from the process calculated using equation O-4. systemCalculatedUnroundedHFC23EqO4 O O-001 You have selected Subpart O for reporting, but you have not yet initiated it. isSetupInitiated O O-002 Please indicate if the facility produces HCFC-22. This data element is required. doesFacilityProduceHCFC22 O O-003 Please indicate if the facility sends any HFC-23 offsite for destruction. This data element is required. doesFacilityDestroyHFCOffsite O O-004 Please indicate if the facility destroys HFC-23 onsite. This data element is required. doesFacilityDestroyHFCOnsite O O-008 You have indicated that your facility sends HFC-23 offsite for destruction but haven\'t added any Off-Site HFC-23 Destruction Facility Information. doesFacilityDestroyHFCOffsite O O-010 You have indicated that your facility destroys HFC-23 onsite but haven\'t added any On-Site HFC-23 Destruction Process Information. doesFacilityDestroyHFCOnsite O O-012 The combined mass of all materials other than HCFC-22 and HFC-23. This data element is required. combinedMassOfMaterialsRemoved O O-013a Indicate whether the annual mass of combined mass of all materials other than HCFC-22 and HFC-23 for the process is based on a missing data procedure. This data element is required. isAnnualMassBasedOnMDP O O-014a If the annual mass of combined mass of all materials other than HCFC-22 and HFC-23 for the process is based on a missing data procedure then enter Number of hours that a missing data procedure was used. This data element is required. nOHMissingDataProcedureWasUsed O O-015 Method for tracking startups, shutdowns, and malfunctions and HFC-23 generation/emissions during these events. This data element is required. trackingMethod O O-017 Add reactants that are fed into the process. This data element is required. reactants O O-019a Annual mass of HFC-23 emitted from all equipment leaks from the process. This data element is required. annualMassOfHFC23EquLeaks O O-020a Was the annual mass of HFC-23 emitted from all equipment leaks from the process based on a missing data procedure. This data element is required. isAnnualMassOfHFC23BasedOnMDPEquLeaks O O-021 Number of hours a missing data procedure was used to determine the annual mass of HFC-23 emitted from all equipment leaks. This data element is required. numberOfHoursMDPWereUsedEquLeaks O O-022a Annual mass of HFC-23 emitted from all process vents for the process. This data element is required. annualMassOfHFC23ProcessVents O O-023a Was the annual mass of HFC-23 emitted from all process vents for the process based on a missing data procedure. This data element is required. isAnnualMassOfHFC23BasedOnMDPProcessVents O O-024 Number of hours a missing data procedure was used to determine the annual mass of HFC-23 emitted from all process vents. This data element is required. numberOfHoursMDPWereUsedProcessVents O O-026 Reactant fed into the process. This data element is required. nameOfReactant O O-027 Identify other reactant fed into the process. This data element is required. otherNameOfreactant O O-028 Annual mass of reactant fed into the process. This data element is required. annualMassFedIntoReactant O O-029 Indicate whether the annual mass of the reactant fed into the process is based on a missing data procedure. This data element is required. isAnnualMassBasedOnMDP O O-030 Number of hours that a missing data procedure was used to determine the annual mass of the reactant fed into the process. This data element is required. numberOfHoursMDPWasUsed O O-031 Facility Name. Please provide a unique name. facilityName O O-032 Facility Name. This data element is required. facilityName O O-033 Street Address. This data element is required. streetAddress O O-034 City. This data element is required. city O O-035 City. Please enter a valid city name. city O O-036 State. This data element is required. state O O-037 Zip/Postal Code. This data element is required. zip O O-038 Zip/Postal Code. US Zip needs to be 5 or 10 numbers. zip O O-039 Quantity of HFC-23 sent to this facility. This data element is required. quantityofHFC23 O O-040 Is the quantity of HFC-23 sent to this facility based on a missing data procedure. This data element is required. isQuantityofHFC23BasedOnMDP O O-041 Number of hours a missing data procedure was used to determine the quantity of HFC-23 sent to this facility. This data element is required. noOfHrsMDPUsedForQuantityofHFC23 O O-042 Unit Name. This data element is required. unitName O O-043 Unit Description. This data element is required. unitDescription O O-044 Is the annual mass of HFC-23 fed into the destruction device at the facility based on a missing data procedure. This data element is required. isAnnualMassOfHFCFedBasedOnMDP O O-045 Number of hours a missing data procedure was used to determine the annual mass of HFC-23 fed into the destruction device. This data element is required. noOfHrsAnnualMassOfHFCFedBasedOnMDP O O-046 Is the annual mass of HFC-23 emitted from the destruction device at the facility based on a missing data procedure. This data element is required. isAnnualMassOfHFCEmittedBasedOnMDP O O-047 Number of hours a missing data procedure was used to determine the annual mass of HFC-23 emitted from the destruction device. This data element is required. noOfHrsAnnualMassOfHFCEmittedBasedOnMDP O O-048 Concentration of HFC-23 measured at the outlet of the destruction device during the facility\'s annual HFC-23 concentration measurements at the outlet of the device. This data element is required. concentrationOfHFC23Measured O O-050 Detection limit concentration. This data element is required. detectionLimitConcentration O O-051 Detection limit concentration units. This data element is required. concentrationUnits O O-052 Was the HFC-23 concentration measured pursuant to §98.154(l) greater than that measured during the performance test that was the basis for the destruction efficiency. This data element is required. isConGTPerformanceTest O O-058 Methods used to determine destruction efficiency. This data element is required. methodsUsedToDetermineDE O O-059 Methods used to record the mass of HFC-23 destroyed. This data element is required. methodsUsedToRecordMassOfHFC23Destroyed O O-060 Name of other relevant federal or state regulations that may apply to the destruction process. This data element is required. nameOfOtherFederalOrStateReg O O-062 Unit Name. Please provide a unique name. unitName O O-063 For the "Indication if the facility produces HCFC-22," "Indication if the facility sends any HFC-23 offsite for destruction," and "Indication if the facility destroys HFC-23 onsite," all 3 cannot be selected as NO. doesFacilityProduceHCFC22 O O-064 Parameter for which missing data were used. This data element is required. parameterMissingDataUsed O O-065 Other parameter. This data element is required. otherParameterMissingData O O-066 Other parameter should be maximum 200 characters long. otherParameterMissingData O O-067 Equipment Leaks, EL (part of Equation O-5): Parameter for which missing data were used. This data element is required. parameterEquLeaks O O-068 Equipment Leaks, EL (part of Equation O-5): Other parameter. This data element is required. otherParameterEquLeaks O O-069 Equipment Leaks, EL (part of Equation O-5): Other parameter should be maximum 200 characters long. otherParameterEquLeaks O O-070 Process Vents, EPV (part of Equation O-5): Parameter for which missing data were used. This data element is required. parameterProcessVents O O-071 Process Vents, EPV (part of Equation O-5): Other parameter. This data element is required. otherParameterProcessVents O O-072 Process Vents, EPV (part of Equation O-5): Other parameter should be maximum 200 characters long. otherParameterProcessVents O O-073 Parameter for which missing data were used. This data element is required. parameterMissingDataProcedure O O-074 Other parameter. This data element is required. otherParameterMissingDataProcedure O O-075 Other parameter should be maximum 200 characters long. otherParameterMissingDataProcedure O O-076 HFC-23 Fed into the Destruction Device: Parameter for which missing data were used. This data element is required. parameterFedIntoDestructionDevice O O-077 HFC-23 Fed into the Destruction Device: Other parameter. This data element is required. otherParameterFedIntoDestructionDevice O O-078 HFC-23 Fed into the Destruction Device: Other parameter should be maximum 200 characters long. otherParameterFedIntoDestructionDevice O O-079 HFC-23 emitted from the Destruction Device: Parameter for which missing data were used. This data element is required. parameterEmittedFromDestructionDevice O O-080 HFC-23 emitted from the Destruction Device: Other parameter. This data element is required. otherParameterEmittedFromDestructionDevice O O-081 HFC-23 emitted from the Destruction Device: Other parameter should be maximum 200 characters long. otherParameterEmittedFromDestructionDevice O O-082 Indicate the method used to calculate the revised destruction efficiency, specifying whether §98.154(l)(1) or (2) was used. This data element is required. revisedDestructionEfficiencyCalculationMethod O O-083 You have indicated that your facility produces HCFC-22 but have not added any HCFC-22 Production Process Information doesFacilityProduceHCFC22 O O-084 Unique Product Process Name/ID. This data element is required. productProcessNameOrId O O-085 Please indicate how your HFC-23 emissions are estimated. This data element is required. areHFC23EmissionsBasedOnEquO4 O O-086 Unique Product Process Name/ID. Please provide a unique Name/ID. productProcessNameOrId O O-089 Was the HFC-23 fed into the on-site destruction process originally generated by an on-site HCFC-22 production process? This data element is required. Please enter the required data or click CANCEL. eqO8HFCAddedToTotalEmissions O O-094 You have indicated this production process uses a destruction device that is connected to the HCFC-22 production equipment, but haven\'t added a destruction device. transientData['foundDesDevice'] OO GHG-ADD-1 The greenhouse gas you are attempting to add is invalid because it already exists on the selection list provided, or you are attempting to add "carbon dioxide" or "methane" which are not applicable to Subpart OO reporting. Please enter a unique greenhouse gas, or click CANCEL. ghgExists OO GHG-ADD-3 The greenhouse gas you are attempting to add is invalid because it has a chemical formula of "CO2", "CH4", "N2O", "CF4", "C2F6" or "CHF3". Greenhouse gases with these chemical formulas cannot be added as an "other" gas. Please enter a unique greenhouse gas, or click CANCEL. ghgInvalidFormula OO OO-006 You have not uploaded a reporting form file. jctSubPartFacility OO OO0251 Chemical Formula: Chemical Formula must be reported if an Other F-GHG is listed in Column O. (Exports Tab, Column Q) chemicalFormula OO OO0252 Chemical Formula: Chemical Formula must be reported if an Other GHG is listed in Column I. (Imports Tab, Column K) chemicalFormula OO OO0253 Chemical Formula: Chemical Formula must be reported if an Other F-GHG is listed in Column L. (Import Destruction Tab, Column N) chemicalFormula OO OO0254 Chemical Formula: Chemical Formula must be reported if an Other F-GHG is listed in Column J. (Import Transformation Tab, Column L) chemicalFormula OO OO0255 Chemical Formula must be reported if an Other F-GHG is listed in Column F. (Offsite Destruction Tab, Part 5b, Column H) chemicalFormula OO OO0256 Chemical Formula must be reported if an Other F-GHG is listed in Column F. (Offsite Destruction Tab, Part 4b, Column H) chemicalFormula OO OO0257 Chemical Formula: Chemical Formula must be reported of an Other F-GHG is listed in Column E. (Onsite Destruction Tab, Column G) chemicalFormula OO OO0258 Chemical Formula must be reported if an Other GHG is listed in Column F. (Onsite Transformation Tab, Column H) chemicalFormula OO OO0259 Chemical Formula: Chemical Formula must be reported if an Other F-GHG is listed in Column F. (Products Tab, Column H) chemicalFormula OO OO0260 Does the process transform a GHG produced at an off-site location. A Yes or No response is required for this data element. (Processes Tab, Column F) processTransformIndicator OO OO0261 Was the mass determined using a missing data procedure? A Yes or No response is required for this data element. (Onsite Transformation Tab, Column L) massMissingProcedureInd OO OO0262 Was any of the mass that was fed into the transformation process determined using a missing data procedure? A Yes or No response is required for this data element. (Onsite Transformation Tab, Column L) massFedMissingProcedureInd OO OO0263 Was the F-GHG or F-HTF mass determined using a missing data procedure? A Yes or No response is required for this data element. (Onsite Destruction Tab, Column K) massMissingProcedureInd OO OO0264 You have entered a blend name on the [Imports tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. importedN2OorFGHG OO OO0265 You have entered a blend name on the [Imports tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. importedN2OorFGHGExtended OO OO0266 You have entered a blend name on the [Import Destruction tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. destroyedFGHG OO OO0267 You have entered a blend name on the [Import Destruction tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. destroyedFGHGExtended OO OO0268 You have entered a blend name on the [Import Transformation tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. transferredFGHG OO OO0269 You have entered a blend name on the [Import Transformation tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. transferredFGHGExtended OO OO0270 You have entered a blend name on the [Exports tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. fghgDestroyedSoldTransferred OO OO0271 You have entered a blend name on the [Exports tab] that we do not recognize. Please check [{1}] and ensure you have selected an entry from the picklist. If you determine that the blend you have listed is not on the F-GHG Tab please report each of the blend\'s components on separate rows. fghgDestroyedSoldTransExtended P ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] P ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] P CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML P CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits P CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml P CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions P CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs P CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt P CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow P CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture P CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow P CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits P CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions P CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission P CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission P CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission P CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission P CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> P CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 P CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs P CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt P CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate P CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate P CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType P CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate P CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] P CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] P CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] P CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] P CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] P CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] P CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] P CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] P CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName P CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted P CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission P CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission P CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted P CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions P CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate P CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate P CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate P CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate P IVT-P101 The annual quantity of {1} (metric tons) reported for the gaseous fuel or feedstock {2} does not match the sum of the monthly quantities entered into the Inputs Verifier Tool for this fuel or feedstock, which was calculated as {3} (metric tons). Please review the annual and monthly quantities, noting the units of measure and correct this critical error. transientData['annualFeedstockConsumed'] P IVT-P102 The annual quantity of {1} (metric tons) reported for the liquid fuel or feedstock {2} does not match the sum of the monthly quantities entered into the Inputs Verifier Tool for this fuel or feedstock, which was calculated as {3} (metric tons). Please review the annual and monthly quantities, noting the units of measure and correct this critical error. transientData['annualFeedstockConsumed'] P IVT-P103 The annual quantity of {1} (metric tons) reported for the solid fuel or feedstock {2} does not match the sum of the monthly quantities entered into the Inputs Verifier Tool for this fuel or feedstock, which was calculated as {3} (metric tons). Please review the annual and monthly quantities, noting the units of measure and correct this critical error. transientData['annualFeedstockConsumed'] P P001 Please make a selection or click CANCEL. hasCEMS P P002 Annual quantity of carbon other than CO2 collected and transferred off site in either gas, liquid, or solid forms, excluding methanol. This data element is required. annualOtherCarbonTransferred P P003 Annual quantity of carbon other than CO2 collected and transferred off site in eiher gas, liquid, or solid forms, excluding methanol. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualOtherCarbonTransferred P P005 Feedstock Name. This data element is required. Please enter the required data or click CANCEL. feedstockName P P006 Feedstock Type. This data element is required. feedstockType P P011 Hydrogen Produced. This data element is required. If no hydrogen was produced in the reporting year, please enter 0. hydrogenProduced P P012 Hydrogen Produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. hydrogenProduced P P014 Annual quantity of ammonia intentionally produced as a desired product, if applicable. This data element is required. If no ammonia was intentionally produced as a desired product in the reporting year, please enter 0. ammoniaProduced P P015 Annual quantity of ammonia intentionally produced as a desired product, if applicable. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ammoniaProduced P P018 You have not yet added a fuel or feedstock for this unit. feedstocks P P019 Annual quantity of ammonia intentionally produced as a desired product, if applicable. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ammoniaProduced P P020 Hydrogen Produced. This data element is required. If no hydrogen was produced in the reporting year, please enter 0. hydrogenProduced P P022 Hydrogen Produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. hydrogenProduced P P023 Annual quantity of ammonia intentionally produced as a desired product, if applicable. This data element is required. If no ammonia was produced in the reporting year, please enter 0. ammoniaProduced P P100 The annual CO2 emissions for Subpart P [{1} (metric tons)] does not equal the sum of the CO2 emissions for all the units [{2} (metric tons)]. Please address this critical error. Then you can return here to perform another final review and submit your report. data[subpartPAnnualCO2] P P206 You have selected Subpart P for reporting, but you have not yet added a unit. groupUnit P P211 Other feedstock name. This data element is required. Please enter the required data, select a feedstock name from the list provided, or click CANCEL. otherFeedstockName P P212 You have selected an unexpected feedstock type based on the feedstock name selected. For the feedstock name "Natural Gas" in unit {1}, you have selected {2} but the expected type for this feedstock is "gaseous feedstock". Please double check these values and revise, if necessary. If you determine the values are correct, please submit them as is. feedstockName P P213 You have selected an unexpected feedstock type based on the feedstock name selected. For the feedstock name "Refinery Fuel Gas" in unit {1}, you have selected {2} but the expected type for this feedstock is "gaseous feedstock". Please double check these values and revise, if necessary. If you determine the values are correct, please submit them as is. feedstockName P P214 You have selected an unexpected feedstock type based on the feedstock name selected. For the feedstock name "Brine" in unit {1}, you have selected {2} but the expected type for this feedstock is "liquid feedstock". Please double check these values and revise, if necessary. If you determine the values are correct, please submit them as is. feedstockName P UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName P UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType PP ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] PP ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] PP PP001 Quarterly flow rate measurement, for quarter(s) [{1}]. This data element is required. flowRate PP PP002 Quarterly flow rate measurement, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. flowRate PP PP013 Eq. PP-1 official emissions value unrounded. This data element is required. co2Emissions.officialUnroundedCo2 PP PP014 Eq. PP-1 official emissions value unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2Emissions.officialUnroundedCo2 PP PP016 Eq. PP-1 override value indicator. This data element is required. Please make a selection or click CANCEL. co2Emissions.isUserOverriddenCo2 PP PP017 Eq. PP-2 official emissions value rounded. This data element is required. co2Emissions.officialUnroundedCo2 PP PP018 Eq. PP-2 official emissions value rounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. co2Emissions.officialUnroundedCo2 PP PP020 Eq. PP-2 override value indicator. This data element is required. Please make a selection or click CANCEL. co2Emissions.isUserOverriddenCo2 PP PP021 Unit type (flow meter or CO2 stream). This data element is required. unitType PP PP022 Measurement type. This data element is required. measurementType PP PP023 Total extracted CO2, unrounded. This data element is required. extractedUnroundedCo2 PP PP024 Total extracted CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. extractedUnroundedCo2 PP PP026 Total imported CO2, unrounded. This data element is required. importedUnroundedCo2 PP PP027 Total imported CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. importedUnroundedCo2 PP PP029 Total exported CO2, unrounded. This data element is required. exportedUnroundedCo2 PP PP030 Total exported CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. exportedUnroundedCo2 PP PP032 Quarterly flow rate measurement, for quarter(s) [{1}]. This data element is required. flowRate PP PP033 Quarterly flow rate measurement, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. flowRate PP PP044 Quarterly CO2 concentration measurement for quarter(s) [{1}]. This data element is required. concentration PP PP045 Quarterly CO2 concentration measurement for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing. concentration PP PP056 Quarterly CO2 or CO2 stream density measurement, for quarter(s) [{1}]. This data element is required. density PP PP057 Quarterly CO2 or CO2 stream density measurement, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. density PP PP068 Quarterly CO2 concentration measurement, for quarter(s) [{1}]. This data element is required. concentration PP PP069 Quarterly CO2 concentration measurement, for quarter(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to 1.0. You must correct the current value before continuing. concentration PP PP080 Annual quantity of CO2 transferred to food and beverage. This data element is required. annualFoodAndBeverageCo2 PP PP081 Annual quantity of CO2 transferred to food and beverage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFoodAndBeverageCo2 PP PP083 Annual quantity of CO2 transferred to industrial and municipal water/wastewater treatment. This data element is required. annualWaterTreatmentCo2 PP PP084 Annual quantity of CO2 transferred to industrial and municipal water/wastewater treatment. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualWaterTreatmentCo2 PP PP086 Annual quantity of CO2 transferred to metal fabrication, including welding and cutting. This data element is required. annualMetalFabricationCo2 PP PP087 Annual quantity of CO2 transferred to metal fabrication, including welding and cutting. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualMetalFabricationCo2 PP PP089 Annual quantity of CO2 transferred to greenhouse uses for plant growth. This data element is required. annualPlantGrowthCo2 PP PP090 Annual quantity of CO2 transferred to greenhouse uses for plant growth. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualPlantGrowthCo2 PP PP092 Annual quantity of CO2 transferred to fumigants (e.g., grain storage) and herbicides. This data element is required. annualFumigantCo2 PP PP093 Annual quantity of CO2 transferred to fumigants (e.g., grain storage) and herbicides. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFumigantCo2 PP PP095 Annual quantity of CO2 transferred to pulp and paper. This data element is required. annualPulpAndPaperCo2 PP PP096 Annual quantity of CO2 transferred to pulp and paper. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualPulpAndPaperCo2 PP PP098 Annual quantity of CO2 transferred to cleaning and solvent use. This data element is required. annualCleaningAndSolventCo2 PP PP099 Annual quantity of CO2 transferred to cleaning and solvent use. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualCleaningAndSolventCo2 PP PP101 Annual quantity of CO2 transferred to fire fighting. This data element is required. annualFirefightingCo2 PP PP102 Annual quantity of CO2 transferred to fire fighting. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFirefightingCo2 PP PP104 Annual quantity of CO2 transferred to transportation and storage of explosives. This data element is required. annualExplosivesCo2 PP PP105 Annual quantity of CO2 transferred to transportation and storage of explosives. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExplosivesCo2 PP PP113 Annual quantity of CO2 transferred to research and development. This data element is required. annualResearchAndDevelopmentCo2 PP PP114 Annual quantity of CO2 transferred to research and development. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualResearchAndDevelopmentCo2 PP PP119 Number of days for which substitute data procedures were used to measure CO2 mass or volume. This data element is required. massVolumeSubstituteDays PP PP120 Number of days for which substitute data procedures were used to measure CO2 mass or volume. You must enter a value that is greater than or equal to zero and less than or equal to 366. You must correct the current value before continuing. massVolumeSubstituteDays PP PP122 Number of days for which substitute data procedures were used to measure CO2 concentration. This data element is required. concentrationSubstituteDays PP PP123 Number of days for which substitute data procedures were used to measure CO2 concentration. You must enter a value that is greater than or equal to zero and less than or equal to 366. You must correct the current value before continuing. concentrationSubstituteDays PP PP125 Number of days for which substitute data procedures were used to measure CO2 stream density. This data element is required. densitySubstituteDays PP PP126 Number of days for which substitute data procedures were used to measure CO2 stream density. You must enter a value that is greater than or equal to zero and less than 366. You must correct the current value before continuing. densitySubstituteDays PP PP128 Equipment type name. This data element is required. equipmentTypeName PP PP129 Equipment type name. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. equipmentTypeOtherDesc PP PP130 Unit type (flow meter or CO2 stream). This data element is required. unitType PP PP131 Measurement type. This data element is required. measurementType PP PP132 Flow meter location. This data element is required. flowMeterLocation PP PP133 Was the CO2 metered by the flow meter imported or exported? This data element is required. co2ImportedOrExported PP PP134 Percent of CO2 that is biomass-based. This data element is required. biomassBasedPercent PP PP136 Percent of CO2 that is biomass-based. This value should be reported as a percentage, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. biomassBasedPercent PP PP137 Is any dehydration equipment located downstream of the flow meter? This data element is required. isDehydrationEquipmentDownstream PP PP138 Is any dehydration equipment located upstream of the flow meter? This data element is required. isDehydrationEquipmentUpstream PP PP139 Is any compression equipment located downstream of the flow meter? This data element is required. isCompressionEquipmentDownstream PP PP140 Is any compression equipment located upstream of the flow meter? This data element is required. isCompressionEquipmentUpstream PP PP141 Is any other processing equipment located downstream of the flow meter? This data element is required. isOtherEquipmentDownstream PP PP142 Is any other processing equipment located upstream of the flow meter? This data element is required. isOtherEquipmentUpstream PP PP143 Subpart PP Calculation Methodology. This data element is required. calculationMethodology PP PP144 Subpart PP Supplier Type. This data element is required. supplierCategory PP PP145 Total imported CO2, unrounded. This data element is required. importedUnroundedCo2 PP PP146 Total imported CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. importedUnroundedCo2 PP PP148 Total exported CO2, unrounded. This data element is required. exportedUnroundedCo2 PP PP149 Total exported CO2, unrounded. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. exportedUnroundedCo2 PP PP150 Standard used to measure CO2 Density. This data element is required. transientData['densityMethod'] PP PP151 Describe what other processing equipment is present. You selected "Yes" on other processing equipment, but failed to provide any additional information in the text box provided. This data element is required. otherEquipmentDesc PP PP152 Standard used to measure CO2 concentration. This data element is required. transientData['concentrationStandard'] PP PP153 Standard used to measure CO2 concentration. This data element is required. transientData['concentrationStandard'] PP PP155 Type of Equipment. You must add at least one type of equipment in Miscellaneous Information for Suppliers of Carbon Dioxide. This is a required field. equipmentTypes PP PP156 Percent of CO2 that is biomass-based. This data element is required. biomassBasedPercent PP PP158 Percent of CO2 that is biomass-based. This value should be reported as a percentage, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. biomassBasedPercent PP PP159 Annual quantity of CO2 transferred to food and beverage from imports. This data element is required. annualImportedFoodAndBeverageCo2 PP PP160 Annual quantity of CO2 transferred to food and beverage from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedFoodAndBeverageCo2 PP PP161 Annual quantity of CO2 transferred to industrial and municipal water/wastewater treatment from imports. This data element is required. annualImportedWaterTreatmentCo2 PP PP162 Annual quantity of CO2 transferred to industrial and municipal water/wastewater treatment from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedWaterTreatmentCo2 PP PP163 Annual quantity of CO2 transferred to metal fabrication, including welding and cutting, from imports. This data element is required. annualImportedMetalFabricationCo2 PP PP164 Annual quantity of CO2 transferred to metal fabrication, including welding and cutting, from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedMetalFabricationCo2 PP PP165 Annual quantity of CO2 transferred to greenhouse uses for plant growth from imports. This data element is required. annualImportedPlantGrowthCo2 PP PP166 Annual quantity of CO2 transferred to greenhouse uses for plant growth from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedPlantGrowthCo2 PP PP167 Annual quantity of CO2 transferred to fumigants (e.g., grain storage) and herbicides from imports. This data element is required. annualImportedFumigantCo2 PP PP168 Annual quantity of CO2 transferred to fumigants (e.g., grain storage) and herbicides from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedFumigantCo2 PP PP169 Annual quantity of CO2 transferred to pulp and paper from imports. This data element is required. annualImportedPulpAndPaperCo2 PP PP170 Annual quantity of CO2 transferred to pulp and paper from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedPulpAndPaperCo2 PP PP171 Annual quantity of CO2 transferred to cleaning and solvent use from imports. This data element is required. annualImportedCleaningAndSolventCo2 PP PP172 Annual quantity of CO2 transferred to cleaning and solvent use from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedCleaningAndSolventCo2 PP PP173 Annual quantity of CO2 transferred to fire fighting from imports. This data element is required. annualImportedFirefightingCo2 PP PP174 Annual quantity of CO2 transferred to fire fighting from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedFirefightingCo2 PP PP175 Annual quantity of CO2 transferred to transportation and storage of explosives from imports. This data element is required. annualImportedExplosivesCo2 PP PP176 Annual quantity of CO2 transferred to transportation and storage of explosives from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedExplosivesCo2 PP PP181 Annual quantity of CO2 transferred to research and development from imports. This data element is required. annualImportedResearchAndDevelopmentCo2 PP PP182 Annual quantity of CO2 transferred to research and development from imports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualImportedResearchAndDevelopmentCo2 PP PP185 Annual quantity of CO2 transferred to food and beverage from exports. This data element is required. annualExportedFoodAndBeverageCo2 PP PP186 Annual quantity of CO2 transferred to food and beverage from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedFoodAndBeverageCo2 PP PP187 Annual quantity of CO2 transferred to industrial and municipal water/wastewater treatment from exports. This data element is required. annualExportedWaterTreatmentCo2 PP PP188 Annual quantity of CO2 transferred to industrial and municipal water/wastewater treatment from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedWaterTreatmentCo2 PP PP189 Annual quantity of CO2 transferred to metal fabrication, including welding and cutting, from exports. This data element is required. annualExportedMetalFabricationCo2 PP PP190 Annual quantity of CO2 transferred to metal fabrication, including welding and cutting, from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedMetalFabricationCo2 PP PP191 Annual quantity of CO2 transferred to greenhouse uses for plant growth from exports. This data element is required. annualExportedPlantGrowthCo2 PP PP192 Annual quantity of CO2 transferred to greenhouse uses for plant growth from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedPlantGrowthCo2 PP PP193 Annual quantity of CO2 transferred to fumigants (e.g., grain storage) and herbicides from exports. This data element is required. annualExportedFumigantCo2 PP PP194 Annual quantity of CO2 transferred to fumigants (e.g., grain storage) and herbicides from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedFumigantCo2 PP PP195 Annual quantity of CO2 transferred to pulp and paper from exports. This data element is required. annualExportedPulpAndPaperCo2 PP PP196 Annual quantity of CO2 transferred to pulp and paper from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedPulpAndPaperCo2 PP PP197 Annual quantity of CO2 transferred to cleaning and solvent use from exports. This data element is required. annualExportedCleaningAndSolventCo2 PP PP198 Annual quantity of CO2 transferred to cleaning and solvent use from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedCleaningAndSolventCo2 PP PP199 Annual quantity of CO2 transferred to fire fighting from exports. This data element is required. annualExportedFirefightingCo2 PP PP200 Annual quantity of CO2 transferred to fire fighting from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedFirefightingCo2 PP PP201 Annual quantity of CO2 transferred to transportation and storage of explosives from exports. This data element is required. annualExportedExplosivesCo2 PP PP202 Annual quantity of CO2 transferred to transportation and storage of explosives from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedExplosivesCo2 PP PP207 Annual quantity of CO2 transferred to research and development from exports. This data element is required. annualExportedResearchAndDevelopmentCo2 PP PP208 Annual quantity of CO2 transferred to research and development from exports. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualExportedResearchAndDevelopmentCo2 PP PP220 You have not indicated your facility/supplier type (capture facility, extract facility, or importer/exporter). supplierCategory PP PP221 You have not yet added a flow meter. none PP PP222 You have not yet added a CO2 stream. none PP PP223 Type of Equipment. You specified "volumetric basis" as the measurement type for at least one flow meter, but you have not specified "Volumetric flow meter" as a type of equipment used. data['calculationMethodology'] PP PP224 Type of Equipment. You specified "volumetric basis" as the measurement type for at least one CO2 stream, but you have not specified "Loaded container volume" as a type of equipment used. data['calculationMethodology'] PP PP227 You have not yet added a flow meter or CO2 stream. none PP PP228 Importer or Exporter Type. This data element is required. importerExporterType PP PP250 GHGRP ID of a subpart D facility from which you capture a CO2 stream from an electricity generating unit. This data element is required. ghgrpid PP PP251 Facility Name (State). This data element is required. facilityName PP PP252 The GHGRP ID you entered does not exist. transientData['retrievedFacility'] PP PP253 Facility Name (State). This data element is required. facilityName PP PP254 Quantity of CO2 transferred to that facility. This data element is required. co2Quantity PP PP255 The GHGRP ID you entered does not exist. transientData['retrievedFacility'] PP PP256 GHGRP ID of a subpart RR facility from which you capture a CO2 stream from an electricity generating unit. This data element is required. ghgrpid PP PP425 Type of Equipment. You specified "Mass basis" as the measurement type for at least one flow meter, but you have not specified "Mass flow meter" as a type of equipment used. data['calculationMethodology'] PP UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName PP UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType Q CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML Q CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits Q CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml Q CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions Q CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs Q CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt Q CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow Q CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture Q CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow Q CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits Q CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions Q CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission Q CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission Q CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission Q CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission Q CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> Q CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 Q CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs Q CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt Q CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate Q CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate Q CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType Q CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate Q CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] Q CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] Q CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] Q CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] Q CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] Q CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] Q CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] Q CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] Q CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName Q CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted Q CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission Q CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission Q CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted Q CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions Q CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate Q CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate Q CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate Q CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate Q IOE-1 The "Input/Output name" you are attempting to add is invalid because it already exists in this facility. Please enter a unique name, or click CANCEL. ioExists Q Q002 Unit Name or ID. This data element is required. Please enter the required data or click CANCEL. groupUnitName Q Q003 Unit Type. This data element is required. groupUnitType Q Q005 Input or Output Name. This data element is required. Please enter the required data or click CANCEL. name Q Q006 Input or Output Type. This data element is required. type Q Q016 Number of months that missing data procedures were followed. This data element is required. Please enter the required data. iGPnumbermonths Q Q017 Number of months that missing data procedures were followed. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. iGPnumbermonths Q Q019 Carbon content determination method. This data element is required. iGPCCDetmethod Q Q020 Carbon content determination method. You selected "Other (specify)" from the pick list provided, but failed to provide any additional information in the "Specify carbon content determination method" text box provided. This data element is required. ccdetOtherMethod Q Q024 The number of times that missing data procedures were followed and the performance test was repeated to determine the site-specific emission factor. This data element is required. Please enter the required data. numberOfMonths Q Q025 The number of times that missing data procedures were followed and the performance test was repeated to determine the site-specific emission factor. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. numberOfMonths Q Q026 Annual production of taconite pellets (metric tons). This data element is required. Please enter the required data. annualTaconitePellets Q Q027 Annual production of molten raw steel (metric tons). This data element is required. Please enter the required data. annualMoltenSteel Q Q029 Annual production of sinter (metric tons). This data element is required. Please enter the required data. annualSinter Q Q031 Annual production of taconite pellets (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualTaconitePellets Q Q032 Annual production of molten raw steel (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualMoltenSteel Q Q034 Annual production of sinter (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualSinter Q Q035 Annual production of direct reduced iron (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualDirectReducedIron Q Q036 You have selected Subpart Q for reporting, but you have not yet added a unit. groupUnit Q Q039 You have not yet added an input for this unit. numberOfInputs Q Q040 You have not yet added an output for this unit. numberOfOutputs Q Q041 Method used to develop the substitute data value(s). This data element is required. iGPmethod Q Q071 Annual production of Coke (metric tons). This data element is required. Please enter the required data. annualCoke Q Q072 Annual production of Direct Reduced Iron (metric tons). This data element is required. Please enter the required data. annualDirectReducedIron Q Q073 Unit Name or ID. This data element contains special characters. Please re-enter a new name or click CANCEL. groupUnitName Q Q074 Input or Output Name. This data element contains special characters. Please re-enter a new name or click CANCEL. name Q Y192 Type of flare. This data element is required. Please make a selection. flareType Q Y193 Flare service type. This data element is required. Please make a selection. flareServiceType Q Y194 Flare service type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. flareServiceTypeOther Q Y195 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 Q Y196 Equation Y-1a Inputs Method. This data element is required. Please make a selection or click CANCEL. equationY1aInputsMethod Q Y201 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 Q Y202 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Q Y204 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency Q Y205 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume Q Y206 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume Q Y208 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures Q Y209 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures Q Y211 Annual average molecular weight. This data element is required. Please enter the required data. avgMolecularWeight Q Y212 Annual average molecular weight. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. avgMolecularWeight Q Y214 Method(s) used to determine the molecular weight of the flare gas. This data element is required. avgMolecularWeightMethods Q Y215 Number of days missing data procedures were used for annual average molecular weight of the flare gas. This data element is required. Please enter the required data. avgMolecularWeightDaysMissingProcedures Q Y216 Number of days missing data procedures were used for annual average molecular weight of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgMolecularWeightDaysMissingProcedures Q Y218 Annual average carbon content of the flare gas. This data element is required. Please enter the required data. avgCarbonContent Q Y219 Annual average carbon content of the flare gas. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. avgCarbonContent Q Y221 Method(s) used to determine the carbon content of the flare gas. This data element is required. avgCarbonContentMethods Q Y222 Number of days missing data procedures were used for average carbon content of the flare gas. This data element is required. Please enter the required data. avgCarbonContentDaysMissingProcedures Q Y223 Number of days missing data procedures were used for average carbon content of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgCarbonContentDaysMissingProcedures Q Y225 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 Q Y226 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Q Y228 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency Q Y229 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume Q Y230 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume Q Y232 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures Q Y233 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures Q Y235 Annual average CO2 concentration. This data element is required. Please enter the required data. avgCo2Concentration Q Y236 Annual average CO2 concentration. This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. avgCo2Concentration Q Y238 Method used to determine the annual average CO2 concentration. This data element is required. avgCo2ConcentrationBasis Q Y239 Number of days missing data procedures were used for annual average CO2 concentration. This data element is required. Please enter the required data. avgCo2ConcentrationDaysMissingProcedures Q Y240 Number of days missing data procedures were used for annual average CO2 concentration. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgCo2ConcentrationDaysMissingProcedures Q Y242 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 Q Y243 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Q Y245 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency Q Y246 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume Q Y247 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume Q Y249 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures Q Y250 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures Q Y252 Conditions on which the annual volume of flare gas was determined. This data element is required. Please make a selection. annualFlareGasVolumeConditions Q Y253 Annual average higher heating value of the flare gas combusted. This data element is required. Please enter the required data. avgHighHeatingValue Q Y254 Annual average higher heating value of the flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. avgHighHeatingValue Q Y256 Method used to determine the annual average higher heating value. This data element is required. avgHighHeatingValueBasis Q Y257 Number of days missing data procedures were used for annual average higher heating value. This data element is required. Please enter the required data. avgHighHeatingValueDaysMissingProcedures Q Y258 Number of days missing data procedures were used for annual average higher heating value. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgHighHeatingValueDaysMissingProcedures Q Y260 Conditions on which the annual average higher heating value was determined. This data element is required. Please make a selection. avgHighHeatingValueConditions Q Y261 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 Q Y262 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Q Y264 Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. This data element is required. Please enter the required data. numberOfSSMEventsExceeding500K Q Y265 Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSSMEventsExceeding500K Q Y423 Annual average concentration of each carbon-containing compound (other than CO2). This data element is required. Please enter the required data or click CANCEL. annualAverageConcentration Q Y424 Annual average concentration of each carbon-containing compound (other than CO2). This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. annualAverageConcentration Q Y426 Method(s) used to determine the annual average concentration of the carbon-containing compound(s). This data element is required. annualAverageConcentrationMethods Q Y426a Method(s) used to determine the annual average concentration of the carbon-containing compound(s). You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. annualAverageConcentrationMethodsOther Q Y427 Number of days missing data procedures were used for annual average concentration of carbon in the compound. This data element is required. Please enter the required data or click CANCEL. annualAverageConcentrationDaysMissingProcedures Q Y428 Number of days missing data procedures were used for annual average concentration of carbon in the compound. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualAverageConcentrationDaysMissingProcedures Q Y431 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Q Y438 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o Q Y439 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Q Y442 Carbon-containing compound (other than carbon dioxide) in flare gas stream. You must enter at least one carbon-containing compound other than carbon dioxide in flare gas stream. This is a required field. carbonCompounds Q Y452 Method(s) used to determine the molecular weight of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMolecularWeightMethodsOther Q Y453 Method(s) used to determine the carbon content of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgCarbonContentMethodsOther Q Y454 Method used to determine the annual average CO2 concentration. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgCo2ConcentrationBasisOther Q Y455 Method used to determine the annual average higher heating value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgHighHeatingValueBasisOther Q Y491 Flare type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. flareTypeOther Q Y495 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure Q Y496 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure Q Y497 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure Q Y505 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther Q Y506 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther Q Y507 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther Q Y513 Annual CH4 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCh4 Q Y514 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Q Y515 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Q Y516 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Q Y520 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o Q Y521 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o Q Y522 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o Q Y526 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Q Y527 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Q Y528 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Q Y555 Is the flare serviced by a flare gas recovery system? This data element is required. Please make a selection. isTheFlareServicedByFlareGasRecoverySystem Q Y590 Annual mass of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasMass Q Y591 Annual mass of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasMass Q Y593 Method(s) used to determine the mass of flare gas. This data element is required. Please enter the required data. massFlareGasMethods Q Y594 Number of days missing data procedures were used for annual mass of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasMassDaysMissingProcedures Q Y595 Number of days missing data procedures were used for annual mass of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasMassDaysMissingProcedures QQ QQ0002 You have not uploaded a reporting form file. jctSubPartFacility QQ QQ0003 You have selected Subpart QQ for reporting, but you have not yet uploaded a reporting form file. none QQ QQ0005 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID QQ QQ0006 Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod QQ QQ0009 Equipment/Appliance Name or ID. This data element is required. Note that merged cells are unacceptable in eGGRT. equipOrAppName QQ QQ0010 Equipment/Appliance Type. This data element is required. equipOrAppType QQ QQ0011 Is the appliance or electrical equipment type imported or exported? This data element is required. equipOrAppImpOrExp QQ QQ0012 Number of pieces of this appliance or electrical equipment type imported or exported. This data element is required. noOfPiecesImpOrExpInEquip QQ QQ0013 Number of pieces of this appliance or electrical equipment type imported or exported. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. noOfPiecesImpOrExpInEquip QQ QQ0014 Total charge or holding size per unit. This data element is required. totalChargeSizeInEquip QQ QQ0015 Total charge or holding size per unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalChargeSizeInEquip QQ QQ0017 F-GHG charged into Equipment/Appliance (1 of 5). This data element is required. ghgName1InEquip QQ QQ0018 Mass fraction of f-GHG in charge (1 of 5). This data element is required. massFractionOfGhg1InEquip QQ QQ0020 F-GHG charged into Equipment/Appliance (2 of 5). This data element is required. ghgName2InEquip QQ QQ0021 Mass fraction of f-GHG in charge (2 of 5). This data element is required. massFractionOfGhg2InEquip QQ QQ0023 F-GHG charged into Equipment/Appliance (3 of 5). This data element is required. ghgName3InEquip QQ QQ0024 Mass fraction of f-GHG in charge (3 of 5). This data element is required. massFractionOfGhg3InEquip QQ QQ0026 F-GHG charged into Equipment/Appliance (4 of 5). This data element is required. ghgName4InEquip QQ QQ0027 Mass fraction of f-GHG in charge (4 of 5). This data element is required. massFractionOfGhg4InEquip QQ QQ0029 F-GHG charged into Equipment/Appliance (5 of 5). This data element is required. ghgName5InEquip QQ QQ0033 Mass fraction of f-GHG in charge (5 of 5). This data element is required. massFractionOfGhg5InEquip QQ QQ0035 F-GHG in foam that is contained in Equipment/Appliance (1 of 3). This data element is required. ghgName1InFoamInApp QQ QQ0036 Manufacturer of Foam Containing Unknown GHG (1 of 3). This data element is required. foamManufacturerNameInFoamInApp QQ QQ0037 Mass of Unknown GHG (1 of 3). This data element is required. massOfUnknownGhgInFoamInApp QQ QQ0038 Mass of Unknown GHG (1 of 3). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. massOfUnknownGhgInFoamInApp QQ QQ0039 Certification (1 of 3). This data element is required. isCertifiedInFoamInApp QQ QQ0040 Mass of f-GHG in foam in each piece of Equipment/Appliance (1 of 3). This data element is required. massOfGhg1InFoamInApp QQ QQ0041 Mass of f-GHG in foam in each piece of Equipment/Appliance (1 of 3). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. massOfGhg1InFoamInApp QQ QQ0042 F-GHG in foam that is contained in Equipment/Appliance (2 of 3). This data element is required. ghgName2InFoamInApp QQ QQ0043 Mass of f-GHG in foam in each piece of Equipment/Appliance (2 of 3). This data element is required. massOfGhg2InFoamInApp QQ QQ0044 Mass of f-GHG in foam in each piece of Equipment/Appliance (2 of 3). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. massOfGhg2InFoamInApp QQ QQ0045 F-GHG in foam that is contained in Equipment/Appliance (3 of 3). This data element is required. ghgName3InFoamInApp QQ QQ0049 Mass of f-GHG in foam in each piece of Equipment/Appliance (3 of 3). This data element is required. massOfGhg3InFoamInApp QQ QQ0050 Mass of f-GHG in foam in each piece of Equipment/Appliance (3 of 3). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. massOfGhg3InFoamInApp QQ QQ0085 Foam Name or ID. This data element is required. foamName QQ QQ0086 Foam Type. This data element is required. foamType QQ QQ0087 Is the foam imported or exported? This data element is required. foamImpOrExp QQ QQ0088 Total volume of foam imported or exported. This data element is required. volumeOfFoamImpOrExp QQ QQ0089 Total volume of foam imported or exported. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. volumeOfFoamImpOrExp QQ QQ0092 F-GHG in foam that is NOT in appliance (1 of 3). This data element is required. ghgName1InFoam QQ QQ0093 Manufacturer of Foam Containing Unknown GHG (1 of 3). This data element is required. foamManufacturerNameInFoam QQ QQ0094 Mass of Unknown GHG (1 of 3). This data element is required. massOfUnknownGhgInFoam QQ QQ0095 Mass of Unknown GHG (1 of 3). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. massOfUnknownGhgInFoam QQ QQ0096 Certification (1 of 3). This data element is required. isCertifiedInFoam QQ QQ0097 Mass of f-GHG (1 of 3). This data element is required. massOfGhg1InFoam QQ QQ0098 Mass of f-GHG (1 of 3). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. massOfGhg1InFoam QQ QQ0099 F-GHG in foam that is NOT in appliance (2 of 3). This data element is required. ghgName2InFoam QQ QQ0100 Mass of f-GHG (2 of 3). This data element is required. massOfGhg2InFoam QQ QQ0101 Mass of f-GHG (2 of 3). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. massOfGhg2InFoam QQ QQ0102 F-GHG in foam that is NOT in appliance (3 of 3). This data element is required. ghgName3InFoam QQ QQ0106 Mass of f-GHG (3 of 3). This data element is required. massOfGhg3InFoam QQ QQ0107 Mass of f-GHG (3 of 3). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. massOfGhg3InFoam QQ QQ0110 Total Mass Imported or Exported (1 of 3). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. totalMassInKg1InFoam QQ QQ0111 Total Mass Imported or Exported (1 of 3). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. totalMassInKg1InFoam QQ QQ0112 Does the appliance or electrical equipment contain foam with f-GHGs? This data element is required. isFoamInApp QQ QQ0113 Specify Name of "other f-GHG" charged into Equipment/Appliance. This data element is required. otherGhgName1InEquip QQ QQ0114 Specify CAS Number of "other f-GHG" charged into Equipment/Appliance. This data element is required. otherCasNumber1InEquip QQ QQ0115 Specify Chemical Formula of "other f-GHG" charged into Equipment/Appliance. This data element is required. otherChemicalFormula1InEquip QQ QQ0116 Specify Name of "other f-GHG" in foam that is contained in Equipment/Appliance (1 of 3). This data element is required. otherGhgName1InFoamInApp QQ QQ0117 Specify CAS Number of "other f-GHG" in foam that is contained in Equipment/Appliance (1 of 3). This data element is required. otherCasNumber1InFoamInApp QQ QQ0118 Specify Chemical Formula of "other f-GHG" in foam that is contained in Equipment/Appliance (1 of 3). This data element is required. otherChemicalFormula1InFoamInApp QQ QQ0119 Specify Name of other f-GHG in foam that is NOT in Appliance (1 of 3). This data element is required. otherGhgName1InFoam QQ QQ0120 Specify CAS Number of other f-GHG in foam that is NOT in Appliance (1 of 3). This data element is required. otherCasNumber1InFoam QQ QQ0121 Specify Chemical Formula of other f-GHG in foam that is NOT in Appliance (1 of 3). This data element is required. otherChemicalFormula1InFoam QQ QQ0139 F-GHG charged into Equipment/Appliance (1 of 5). The value entered is not consistent with available values in the pick list. ghgName1InEquip QQ QQ0140 F-GHG charged into Equipment/Appliance (2 of 5). The value entered is not consistent with available values in the pick list. ghgName2InEquip QQ QQ0141 F-GHG charged into Equipment/Appliance (3 of 5). The value entered is not consistent with available values in the pick list. ghgName3InEquip QQ QQ0142 F-GHG charged into Equipment/Appliance (4 of 5). The value entered is not consistent with available values in the pick list. ghgName4InEquip QQ QQ0143 F-GHG charged into Equipment/Appliance (5 of 5). The value entered is not consistent with available values in the pick list. ghgName5InEquip QQ QQ0144 F-GHG in foam that is contained in Equipment/Appliance (1 of 3). The value entered is not consistent with available values in the pick list. ghgName1InFoamInApp QQ QQ0145 F-GHG in foam that is contained in Equipment/Appliance (2 of 3). The value entered is not consistent with available values in the pick list. ghgName2InFoamInApp QQ QQ0146 F-GHG in foam that is contained in Equipment/Appliance (3 of 3). The value entered is not consistent with available values in the pick list. ghgName3InFoamInApp QQ QQ0147 F-GHG in foam that is NOT in appliance (1 of 3). The value entered is not consistent with available values in the pick list. ghgName1InFoam QQ QQ0148 F-GHG in foam that is NOT in appliance (2 of 3). The value entered is not consistent with available values in the pick list. ghgName2InFoam QQ QQ0149 F-GHG in foam that is NOT in appliance (3 of 3). The value entered is not consistent with available values in the pick list. ghgName3InFoam QQ QQ0162 Specify Default GWP of other f-GHG charged into Equipment (1 of 5). The value entered is not consistent with available values in the pick list. other1DefaultGWPInEquip QQ QQ0163 Specify Default GWP of other f-GHG in foam that is contained in Equipment (1 of 3). The value entered is not consistent with available values in the pick list. other1DefaultGWPInFoamInApp QQ QQ0164 Specify Default GWP of "other f-GHG" in foam that is NOT in Equipment (1 of 3). The value entered is not consistent with available values in the pick list. other1DefaultGWPInFoam QQ QQ0165 Specify Default GWP of "other f-GHG" charged into Equipment (1 of 5). This data element is required. other1DefaultGWPInEquip QQ QQ0166 Specify Default GWP of "other f-GHG" in foam that is contained in Equipment (1 of 3). This data element is required. other1DefaultGWPInFoamInApp QQ QQ0167 Specify Default GWP of "other f-GHG" in foam that is NOT in Equipment (1 of 3). This data element is required. other1DefaultGWPInFoam QQ QQ0168 A record for this facility and reporting year of an 'Other f-GHG' greenhouse gas with CAS Registry Number {1} already exists with an assigned GWP Category. This message indicates a greenhouse gas with the same CAS Registry Number has been included but with a different GWP Category. Please be aware that e-GGRT will use the already recorded GWP Category, and its GWP, when calculating emissions of this greenhouse gas. The greenhouse gas is already recorded as: CAS Registry Number: {6}; Gas Name: {7}; Chemical Formula: {8}; GWP Category: {9}. This GWP Category has a GWP value of {10}. The greenhouse gas was subsequently included in Subpart QQ [{11}] as: CAS Registry Number: {1}; Gas Name: {2}; Chemical Formula: {3}; GWP Category: {4}. This GWP Category has a GWP value of {5}. Note, the existing record may be a result of the same greenhouse gas being included in a subpart other than QQ; or, in another section within QQ; or, you may have changed the GWP Category between versions of your subpart QQ reporting form. If you wish to modify the already recorded GWP Category and GWP for this CAS Registry Number, <a href=http://www.ccdsupport.com/confluence/display/help/Contact+the+Help+Desk+-+Issues+Related+to+the+Identification+of+Specific+f-GHGs target=_blank>please contact the GHGRP Help Desk</a>. transientData['uploadedCategory'] QQ QQ0170 The sum of all Mass fraction of f-GHG charged into the Equipment [{2}] (Columns O, Q, S, U and W) is [{1}], which is greater than 1. Please address this critical error. Then you can return here to perform another final review and submit your report. data['totalMassFractionOfGhgInEquip'] QQ QQ0171 The sum of all Mass fraction of f-GHG charged into the Equipment [{2}] (Columns O, Q, S, U and W) is [{1}], which is less than 1. Please address this critical error. Then you can return here to perform another final review and submit your report. data['totalMassFractionOfGhgInEquip'] QQ QQ0172 Total Mass Imported or Exported (2 of 3). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. totalMassInKg2InFoam QQ QQ0173 Total Mass Imported or Exported (2 of 3). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. totalMassInKg2InFoam QQ QQ0174 Total Mass Imported or Exported (3 of 3). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. totalMassInKg3InFoam QQ QQ0175 Total Mass Imported or Exported (3 of 3). The value you have provided is outside the EPA estimated range for this data element. Please double check this value and revise, if necessary. If you believe it to be correct, please submit the value as is. totalMassInKg3InFoam QQ QQ179 You cannot add this greenhouse gas because the CAS Registry Number you have provided for this 'other' gas matches with an existing entry in e-GGRT's extended 40 CFR Part 98 Table A-1 gas list. The gas with the matching CAS Registry Number is identified within e-GGRT as follows: CAS Registry Number: {1}; Gas Name: {2}; Chemical Formula: {3}. If you would like to select this gas, click CANCEL and locate the gas in the selection list provided in the reporting form. If you are unable to locate this gas on the selection list provided, please <a href=http://www.ccdsupport.com/confluence/display/help/Contact+the+Help+Desk+-+Issues+Related+to+the+Identification+of+Specific+f-GHGs target=_blank>contact the GHGRP Help Desk</a>. facilityRY R CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML R CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits R CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml R CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions R CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs R CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt R CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow R CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture R CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow R CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits R CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions R CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission R CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission R CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission R CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission R CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> R CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 R CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs R CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt R CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate R CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate R CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType R CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate R CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] R CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] R CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] R CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] R CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] R CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] R CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] R CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] R CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName R CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted R CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission R CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission R CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted R CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions R CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate R CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate R CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate R CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate R R0006 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID R R0007 Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod R R0008 Is a CEMS used to measure CO2 emissions? This data element is required. isCEMSUsed R R0009 CEMS Only - Total number of smelting furnaces at the facility. This data element is required. totalNumberOfSmeltingFurnacesCEMS R R0011 CEMS Only - Total annual lead production capacity for the facility (short tons). This data element is required. totalAnnualLeadProductionCapacityCems R R0013 No CEMS - Total number of smelting furnaces at the facility. This data element is required. totalNumberOfSmeltingFurnacesNoCEMS R R0015 No CEMS - Total annual lead production capacity for the facility (short tons). This data element is required. totalAnnualLeadProductionCapacityNoCems R R0017 Lead Product Produced. This data element is required. leadProductName R R0018 Product Description. This data element is required. leadProductDescription R R0019 Annual Production of Lead Product Produced at the facility. This data element is required. annualLeadProduction R R0021 Furnace Name/ID. This data element is required. furnaceId R R0022 Annual lead production capacity. This data element is required. annualLeadProdCapacity R R0023 Annual lead production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualLeadProdCapacity R R0024 Name of Each Carbon-Containing Material Fed, Charged, or Otherwise Introduced to a Furnace. This data element is required feedstockName R R0025 Smelting Furnace Associated with Feedstock. This data element is required. furnaceAssociatedWithFeedstock R R0026 Feedstock Type. This data element is required feedstockType R R0027 "Other" Feedstock Description. This data element is required. otherFeedstockDescription R R0028 Substitute Data Procedure for Monthly Mass of Material. This data element is required. substituteDataProcedure R R0029 "Other" Substitute Data Procedure Description. This data element is required. otherSubstituteDataProcedure R R0030 Number of Months that Missing Data Procedures Were Followed to Determine the Monthly Mass of Material. This data element is required. numberOfMonthsForMonthlyMassOfMaterial R R0031 Method Used to Determine the Carbon Content of the Carbon-Containing Material. This data element is required. methodUsedToDetermineCarbonContent R R0032 Number of Months that Missing Data Procedures Were Followed or Analysis was Repeated to Determine the Carbon Content of the Carbon-Containing Material(s) [{1}]. This data element is required. numberOfMonthsForCarbonContainingMaterial R R0037 Multiple rows were found for {1}, {2}, {3} in the reporting form. feedstockName R R005 You have not uploaded a reporting form file. jctSubPartFacility RR RR001 Name of Project, This data element is required. projectName RR RR004 CO2 injection (for R&D) End Date cannot be before Start Date. You must correct the current values before continuing. co2InjectionStartDate RR RR011 Underground Injection Control permit End Date cannot be before Start Date. You must correct the current values before continuing. underGroundInjectionStartDate RR RR012 Name of Project, This data element is required. projectName RR RR015 The MRV plan submittal date cannot be extended by more than 180 days. Please enter a number of days fewer than 180 days maximum. noOfDaysDueDateExtendedBy RR RR016 The MRV plan submittal due date extended by. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. noOfDaysDueDateExtendedBy RR RR017 Select a file to upload, This data element is required. file RR (RPT) RR1000 Volumetric flow through the receiving flow meter in Q1. This data element is required. q1Quantity RR (RPT) RR1002 Volumetric flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1Quantity RR (RPT) RR1004 Standard or method used to calculate the volumetric flow through the receiving flow meter in Q1. This data element is required. q1QuantityMethod RR (RPT) RR1005 Other Standard or Method. This data element is required. q1QuantityMethodOther RR (RPT) RR1006 Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. q1QuantityMissingProcedures RR (RPT) RR1008 Volumetric flow through the receiving flow meter in Q2. This data element is required. q2Quantity RR (RPT) RR1009 Volumetric flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2Quantity RR (RPT) RR1011 Standard or method used to calculate the volumetric flow through the receiving flow meter in Q2. This data element is required. q2QuantityMethod RR (RPT) RR1012 Other Standard or Method. This data element is required. q2QuantityMethodOther RR (RPT) RR1013 Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. q2QuantityMissingProcedures RR (RPT) RR1015 Volumetric flow through the receiving flow meter in Q3. This data element is required. q3Quantity RR (RPT) RR1016 Volumetric flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3Quantity RR (RPT) RR1018 Standard or method used to calculate the volumetric flow through the receiving flow meter in Q3. This data element is required. q3QuantityMethod RR (RPT) RR1019 Other Standard or Method. This data element is required. q3QuantityMethodOther RR (RPT) RR1020 Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. q3QuantityMissingProcedures RR (RPT) RR1022 Volumetric flow through the receiving flow meter in Q4. This data element is required. q4Quantity RR (RPT) RR1023 Volumetric flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4Quantity RR (RPT) RR1025 Standard or method used to calculate the volumetric flow through the receiving flow meter in Q4. This data element is required. q4QuantityMethod RR (RPT) RR1026 Other Standard or Method. This data element is required. q4QuantityMethodOther RR (RPT) RR1027 Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. q4QuantityMissingProcedures RR (RPT) RR1029 Mass flow through the receiving flow meter in Q1. This data element is required. q1Quantity RR (RPT) RR1030 Mass flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1Quantity RR (RPT) RR1032 Standard or method used to calculate the mass flow through the receiving flow meter in Q1. This data element is required. q1QuantityMethod RR (RPT) RR1033 Other Standard or Method. This data element is required. q1QuantityMethodOther RR (RPT) RR1034 Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required q1QuantityMissingProcedures RR (RPT) RR1036 Mass flow through the receiving flow meter in Q2. This data element is required. q2Quantity RR (RPT) RR1037 Mass flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2Quantity RR (RPT) RR1039 Standard or method used to calculate the mass flow through the receiving flow meter in Q2. This data element is required. q2QuantityMethod RR (RPT) RR1040 Other Standard or Method. This data element is required. q2QuantityMethodOther RR (RPT) RR1041 Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required q2QuantityMissingProcedures RR (RPT) RR1043 Mass flow through the receiving flow meter in Q3. This data element is required. q3Quantity RR (RPT) RR1044 Mass flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3Quantity RR (RPT) RR1046 Standard or method used to calculate the mass flow through the receiving flow meter in Q3. This data element is required. q3QuantityMethod RR (RPT) RR1047 Other Standard or Method. This data element is required. q3QuantityMethodOther RR (RPT) RR1048 Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required q3QuantityMissingProcedures RR (RPT) RR1050 Mass flow through the receiving flow meter in Q4. This data element is required. q4Quantity RR (RPT) RR1051 Mass flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4Quantity RR (RPT) RR1053 Standard or method used to calculate the mass flow through the receiving flow meter in Q4. This data element is required. q4QuantityMethod RR (RPT) RR1054 Other Standard or Method. This data element is required. q4QuantityMethodOther RR (RPT) RR1055 Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required q4QuantityMissingProcedures RR (RPT) RR1057 Volume of contents in containers flow through the receiving flow meter in Q1. This data element is required. q1Quantity RR (RPT) RR1058 Volume of contents in containers flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1Quantity RR (RPT) RR1060 Standard or method used to calculate the volume of contents in the container in Q1. This data element is required. q1QuantityMethod RR (RPT) RR1061 Other Standard or Method. This data element is required. q1QuantityMethodOther RR (RPT) RR1062 Number of containers in Q1 for which substitute data procedures were used to calculate the volume of contents in the receiving container. This data element is required. q1QuantityMissingProcedures RR (RPT) RR1064 Volume of contents in containers flow through the receiving flow meter in Q2. This data element is required. q2Quantity RR (RPT) RR1065 Volume of contents in containers flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2Quantity RR (RPT) RR1067 Standard or method used to calculate the volume of contents in the container in Q2. This data element is required. q2QuantityMethod RR (RPT) RR1068 Other Standard or Method. This data element is required. q2QuantityMethodOther RR (RPT) RR1069 Number of containers in Q2 for which substitute data procedures were used to calculate the volume of contents in the receiving container. This data element is required. q2QuantityMissingProcedures RR (RPT) RR1071 Volume of contents in containers flow through the receiving flow meter in Q3. This data element is required. q3Quantity RR (RPT) RR1072 Volume of contents in containers flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3Quantity RR (RPT) RR1074 Standard or method used to calculate the volume of contents in the container in Q3. This data element is required. q3QuantityMethod RR (RPT) RR1075 Other Standard or Method. This data element is required. q3QuantityMethodOther RR (RPT) RR1076 Number of containers in Q3 for which substitute data procedures were used to calculate the volume of contents in the receiving container. This data element is required. q3QuantityMissingProcedures RR (RPT) RR1078 Volume of contents in containers flow through the receiving flow meter in Q4. This data element is required. q4Quantity RR (RPT) RR1079 Volume of contents in containers flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4Quantity RR (RPT) RR1081 Standard or method used to calculate the volume of contents in the container in Q4. This data element is required. q4QuantityMethod RR (RPT) RR1082 Other Standard or Method. This data element is required. q4QuantityMethodOther RR (RPT) RR1083 Number of containers in Q4 for which substitute data procedures were used to calculate the volume of contents in the receiving container. This data element is required. q4QuantityMissingProcedures RR (RPT) RR1085 Mass of contents in the container in Q1. This data element is required. q1Quantity RR (RPT) RR1086 Mass of contents in the container in Q1. This data element is required. q1Quantity RR (RPT) RR1088 Standard or method used to calculate the mass of contents in the container in Q1. This data element is required. q1QuantityMethod RR (RPT) RR1089 Other Standard or Method. This data element is required. q1QuantityMethodOther RR (RPT) RR1090 Number of containers in Q1 for which substitute data procedures were used to calculate the mass of contents in the receiving container. This data element is required q1QuantityMissingProcedures RR (RPT) RR1092 Mass of contents in the container in Q2. This data element is required. q2Quantity RR (RPT) RR1093 Mass of contents in the container in Q2. This data element is required. q2Quantity RR (RPT) RR1095 Standard or method used to calculate the mass of contents in the container in Q2. This data element is required. q2QuantityMethod RR (RPT) RR1096 Other Standard or Method. This data element is required. q2QuantityMethodOther RR (RPT) RR1097 Number of containers in Q2 for which substitute data procedures were used to calculate the mass of contents in the receiving container. This data element is required q2QuantityMissingProcedures RR (RPT) RR1099 Mass of contents in the container in Q3. This data element is required. q3Quantity RR (RPT) RR1100 Mass of contents in the container in Q3. This data element is required. q3Quantity RR (RPT) RR1102 Standard or method used to calculate the mass of contents in the container in Q3. This data element is required. q3QuantityMethod RR (RPT) RR1103 Other Standard or Method. This data element is required. q3QuantityMethodOther RR (RPT) RR1104 Number of containers in Q3 for which substitute data procedures were used to calculate the mass of contents in the receiving container. This data element is required q3QuantityMissingProcedures RR (RPT) RR1106 Mass of contents in the container in Q4. This data element is required. q4Quantity RR (RPT) RR1107 Mass of contents in the container in Q4. This data element is required. q4Quantity RR (RPT) RR1109 Standard or method used to calculate the mass of contents in the container in Q4. This data element is required. q4QuantityMethod RR (RPT) RR1110 Other Standard or Method. This data element is required. q4QuantityMethodOther RR (RPT) RR1111 Number of containers in Q4 for which substitute data procedures were used to calculate the mass of contents in the receiving container. This data element is required q4QuantityMissingProcedures RR (RPT) RR1113 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. q1QuantityRedelivered RR (RPT) RR1114 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1QuantityRedelivered RR (RPT) RR1116 Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. q1QuantityRedeliveredMethod RR (RPT) RR1117 Other Standard or Method. This data element is required. q1QuantityRedeliveredMethodOther RR (RPT) RR1118 Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. q1QuantityRedeliveredMissingProcedures RR (RPT) RR1120 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. q2QuantityRedelivered RR (RPT) RR1121 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2QuantityRedelivered RR (RPT) RR1123 Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. q2QuantityRedeliveredMethod RR (RPT) RR1124 Other Standard or Method. This data element is required. q2QuantityRedeliveredMethodOther RR (RPT) RR1125 Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. q2QuantityRedeliveredMissingProcedures RR (RPT) RR1127 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. q3QuantityRedelivered RR (RPT) RR1128 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3QuantityRedelivered RR (RPT) RR1130 Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. q3QuantityRedeliveredMethod RR (RPT) RR1131 Other Standard or Method. This data element is required. q3QuantityRedeliveredMethodOther RR (RPT) RR1132 Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. q3QuantityRedeliveredMissingProcedures RR (RPT) RR1134 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. q4QuantityRedelivered RR (RPT) RR1135 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4QuantityRedelivered RR (RPT) RR1137 Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. q4QuantityRedeliveredMethod RR (RPT) RR1138 Other Standard or Method. This data element is required. q4QuantityRedeliveredMethodOther RR (RPT) RR1139 Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. q4QuantityRedeliveredMissingProcedures RR (RPT) RR1141 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. q1QuantityRedelivered RR (RPT) RR1142 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1QuantityRedelivered RR (RPT) RR1144 Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. q1QuantityRedeliveredMethod RR (RPT) RR1145 Other Standard or Method. This data element is required. q1QuantityRedeliveredMethodOther RR (RPT) RR1146 Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. q1QuantityRedeliveredMissingProcedures RR (RPT) RR1148 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. q2QuantityRedelivered RR (RPT) RR1149 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2QuantityRedelivered RR (RPT) RR1151 Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. q2QuantityRedeliveredMethod RR (RPT) RR1152 Other Standard or Method. This data element is required. q2QuantityRedeliveredMethodOther RR (RPT) RR1153 Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. q2QuantityRedeliveredMissingProcedures RR (RPT) RR1155 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. q3QuantityRedelivered RR (RPT) RR1156 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3QuantityRedelivered RR (RPT) RR1158 Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. q3QuantityRedeliveredMethod RR (RPT) RR1159 Other Standard or Method. This data element is required. q3QuantityRedeliveredMethodOther RR (RPT) RR1160 Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. q3QuantityRedeliveredMissingProcedures RR (RPT) RR1162 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. q4QuantityRedelivered RR (RPT) RR1163 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4QuantityRedelivered RR (RPT) RR1165 Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. q4QuantityRedeliveredMethod RR (RPT) RR1166 Other Standard or Method. This data element is required. q4QuantityRedeliveredMethodOther RR (RPT) RR1167 Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. q4QuantityRedeliveredMissingProcedures RR (RPT) RR1169 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. q1QuantityRedelivered RR (RPT) RR1170 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1QuantityRedelivered RR (RPT) RR1172 Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. q1QuantityRedeliveredMethod RR (RPT) RR1173 Other Standard or Method. This data element is required. q1QuantityRedeliveredMethodOther RR (RPT) RR1174 Number of containers in Q1 for which substitute data procedures were used to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. q1QuantityRedeliveredMissingProcedures RR (RPT) RR1176 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. q2QuantityRedelivered RR (RPT) RR1177 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2QuantityRedelivered RR (RPT) RR1179 Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. q2QuantityRedeliveredMethod RR (RPT) RR1180 Other Standard or Method. This data element is required. q2QuantityRedeliveredMethodOther RR (RPT) RR1181 Number of containers in Q2 for which substitute data procedures were used to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. q2QuantityRedeliveredMissingProcedures RR (RPT) RR1183 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. q3QuantityRedelivered RR (RPT) RR1184 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3QuantityRedelivered RR (RPT) RR1186 Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. q3QuantityRedeliveredMethod RR (RPT) RR1187 Other Standard or Method. This data element is required. q3QuantityRedeliveredMethodOther RR (RPT) RR1188 Number of containers in Q3 for which substitute data procedures were used to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. q3QuantityRedeliveredMissingProcedures RR (RPT) RR1190 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. q4QuantityRedelivered RR (RPT) RR1191 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4QuantityRedelivered RR (RPT) RR1193 Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. q4QuantityRedeliveredMethod RR (RPT) RR1194 Other Standard or Method. This data element is required. q4QuantityRedeliveredMethodOther RR (RPT) RR1195 Number of containers in Q4 for which substitute data procedures were used to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. q4QuantityRedeliveredMissingProcedures RR (RPT) RR1197 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. q1QuantityRedelivered RR (RPT) RR1198 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1QuantityRedelivered RR (RPT) RR1200 Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. q1QuantityRedeliveredMethod RR (RPT) RR1201 Other Standard or Method. This data element is required. q1QuantityRedeliveredMethodOther RR (RPT) RR1202 Number of containers in Q1 for which substitute data procedures were used to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. q1QuantityRedeliveredMissingProcedures RR (RPT) RR1204 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. q2QuantityRedelivered RR (RPT) RR1205 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2QuantityRedelivered RR (RPT) RR1207 Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. q2QuantityRedeliveredMethod RR (RPT) RR1208 Other Standard or Method. This data element is required. q2QuantityRedeliveredMethodOther RR (RPT) RR1209 Number of containers in Q2 for which substitute data procedures were used to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. q2QuantityRedeliveredMissingProcedures RR (RPT) RR1211 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. q3QuantityRedelivered RR (RPT) RR1212 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3QuantityRedelivered RR (RPT) RR1214 Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. q3QuantityRedeliveredMethod RR (RPT) RR1215 Other Standard or Method. This data element is required. q3QuantityRedeliveredMethodOther RR (RPT) RR1216 Number of containers in Q3 for which substitute data procedures were used to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. q3QuantityRedeliveredMissingProcedures RR (RPT) RR1219 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. q4QuantityRedelivered RR (RPT) RR1220 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4QuantityRedelivered RR (RPT) RR1222 Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. q4QuantityRedeliveredMethod RR (RPT) RR1223 Other Standard or Method. This data element is required. q4QuantityRedeliveredMethodOther RR (RPT) RR1224 Number of containers in Q4 for which substitute data procedures were used to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. q4QuantityRedeliveredMissingProcedures RR (RPT) RR1226 CO2 concentration in the flow in Q1. This data element is required. q1Co2Concentration RR (RPT) RR1227 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q1Co2Concentration RR (RPT) RR1229 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. q1Co2ConcentrationMethod RR (RPT) RR1230 Other Standard or Method. This data element is required. q1Co2ConcentrationMethodOther RR (RPT) RR1231 Were substitute data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. q1Co2ConcentrationMissingProceduresUsed RR (RPT) RR1232 CO2 concentration in the flow in Q2. This data element is required. q2Co2Concentration RR (RPT) RR1233 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q2Co2Concentration RR (RPT) RR1235 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. q2Co2ConcentrationMethod RR (RPT) RR1236 Other Standard or Method. This data element is required. q2Co2ConcentrationMethodOther RR (RPT) RR1237 Were substitute data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. q2Co2ConcentrationMissingProceduresUsed RR (RPT) RR1238 CO2 concentration in the flow in Q3. This data element is required. q3Co2Concentration RR (RPT) RR1239 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q3Co2Concentration RR (RPT) RR1241 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. q3Co2ConcentrationMethod RR (RPT) RR1242 Other Standard or Method. This data element is required. q3Co2ConcentrationMethodOther RR (RPT) RR1243 Were substitute data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. q3Co2ConcentrationMissingProceduresUsed RR (RPT) RR1244 CO2 concentration in the flow in Q4. This data element is required. q4Co2Concentration RR (RPT) RR1245 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q4Co2Concentration RR (RPT) RR1247 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. q4Co2ConcentrationMethod RR (RPT) RR1248 Other Standard or Method. This data element is required. q4Co2ConcentrationMethodOther RR (RPT) RR1249 Were substitute data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. q4Co2ConcentrationMissingProceduresUsed RR (RPT) RR1250 CO2 concentration in the flow in Q1. This data element is required. q1Co2Concentration RR (RPT) RR1251 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q1Co2Concentration RR (RPT) RR1253 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. q1Co2ConcentrationMethod RR (RPT) RR1254 Other Standard or Method. This data element is required. q1Co2ConcentrationMethodOther RR (RPT) RR1255 Were substitute data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. q1Co2ConcentrationMissingProceduresUsed RR (RPT) RR1256 CO2 concentration in the flow in Q2. This data element is required. q2Co2Concentration RR (RPT) RR1257 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q2Co2Concentration RR (RPT) RR1259 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. q2Co2ConcentrationMethod RR (RPT) RR1260 Other Standard or Method. This data element is required. q2Co2ConcentrationMethodOther RR (RPT) RR1261 Were substitute data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. q2Co2ConcentrationMissingProceduresUsed RR (RPT) RR1262 CO2 concentration in the flow in Q3. This data element is required. q3Co2Concentration RR (RPT) RR1263 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q3Co2Concentration RR (RPT) RR1265 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. q3Co2ConcentrationMethod RR (RPT) RR1266 Other Standard or Method. This data element is required. q3Co2ConcentrationMethodOther RR (RPT) RR1267 Were substitute data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. q3Co2ConcentrationMissingProceduresUsed RR (RPT) RR1268 CO2 concentration in the flow in Q4. This data element is required. q4Co2Concentration RR (RPT) RR1269 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q4Co2Concentration RR (RPT) RR1271 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. q4Co2ConcentrationMethod RR (RPT) RR1272 Other Standard or Method. This data element is required. q4Co2ConcentrationMethodOther RR (RPT) RR1273 Were substitute data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. q4Co2ConcentrationMissingProceduresUsed RR (RPT) RR1274 CO2 concentration in the flow in Q1. This data element is required. q1Co2Concentration RR (RPT) RR1275 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q1Co2Concentration RR (RPT) RR1277 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. q1Co2ConcentrationMethod RR (RPT) RR1278 Other Standard or Method. This data element is required. q1Co2ConcentrationMethodOther RR (RPT) RR1279 Number of containers in Q1 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. q1Co2ConcentrationMissingProcedures RR (RPT) RR1281 CO2 concentration in the flow in Q2. This data element is required. q2Co2Concentration RR (RPT) RR1282 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q2Co2Concentration RR (RPT) RR1284 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. q2Co2ConcentrationMethod RR (RPT) RR1285 Other Standard or Method. This data element is required. q2Co2ConcentrationMethodOther RR (RPT) RR1286 Number of containers in Q2 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. q2Co2ConcentrationMissingProcedures RR (RPT) RR1288 CO2 concentration in the flow in Q3. This data element is required. q3Co2Concentration RR (RPT) RR1289 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q3Co2Concentration RR (RPT) RR1291 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. q3Co2ConcentrationMethod RR (RPT) RR1292 Other Standard or Method. This data element is required. q3Co2ConcentrationMethodOther RR (RPT) RR1293 Number of containers in Q3 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. q3Co2ConcentrationMissingProcedures RR (RPT) RR1295 CO2 concentration in the flow in Q4. This data element is required. q4Co2Concentration RR (RPT) RR1296 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q4Co2Concentration RR (RPT) RR1298 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. q4Co2ConcentrationMethod RR (RPT) RR1299 Other Standard or Method. This data element is required. q4Co2ConcentrationMethodOther RR (RPT) RR1300 Number of containers in Q4 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. q4Co2ConcentrationMissingProcedures RR (RPT) RR1302 CO2 concentration in the flow in Q1. This data element is required. q1Co2Concentration RR (RPT) RR1303 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q1Co2Concentration RR (RPT) RR1305 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. q1Co2ConcentrationMethod RR (RPT) RR1306 Other Standard or Method. This data element is required. q1Co2ConcentrationMethodOther RR (RPT) RR1307 Number of containers in Q1 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. q1Co2ConcentrationMissingProcedures RR (RPT) RR1309 CO2 concentration in the flow in Q2. This data element is required. q2Co2Concentration RR (RPT) RR1310 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q2Co2Concentration RR (RPT) RR1312 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. q2Co2ConcentrationMethod RR (RPT) RR1313 Other Standard or Method. This data element is required. q2Co2ConcentrationMethodOther RR (RPT) RR1314 Number of containers in Q2 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. q2Co2ConcentrationMissingProcedures RR (RPT) RR1316 CO2 concentration in the flow in Q3. This data element is required. q3Co2Concentration RR (RPT) RR1317 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q3Co2Concentration RR (RPT) RR1319 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. q3Co2ConcentrationMethod RR (RPT) RR1320 Other Standard or Method. This data element is required. q3Co2ConcentrationMethodOther RR (RPT) RR1321 Number of containers in Q3 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. q3Co2ConcentrationMissingProcedures RR (RPT) RR1323 CO2 concentration in the flow in Q4. This data element is required. q4Co2Concentration RR (RPT) RR1324 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q4Co2Concentration RR (RPT) RR1326 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. q4Co2ConcentrationMethod RR (RPT) RR1327 Other Standard or Method. This data element is required. q4Co2ConcentrationMethodOther RR (RPT) RR1328 Number of containers in Q4 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. q4Co2ConcentrationMissingProcedures RR (RPT) RR1330 Total net mass of CO2 received annually. This data element is required. systemCalculatedUnroundedCo2 RR (RPT) RR1334 Total net mass of CO2 received annually. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 RR (RPT) RR1335 Total net mass of CO2 received annually. This data element is required. officialUnroundedCo2 RR (RPT) RR2001 Volumetric flow through the injection flow meter in Q1. This data element is required. q1Quantity RR (RPT) RR2002 Volumetric flow through the injection flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1Quantity RR (RPT) RR2004 Standard or method used to calculate the volumetric flow through the injection flow meter in Q1. This data element is required. q1QuantityMethod RR (RPT) RR2005 Other Standard or Method. This data element is required. q1QuantityMethodOther RR (RPT) RR2006 Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the injection flow meter. This data element is required. q1QuantityMissingProcedures RR (RPT) RR2008 Volumetric flow through the injection flow meter in Q2. This data element is required. q2Quantity RR (RPT) RR2009 Volumetric flow through the injection flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2Quantity RR (RPT) RR2011 Standard or method used to calculate the volumetric flow through the injection flow meter in Q2. This data element is required. q2QuantityMethod RR (RPT) RR2012 Other Standard or Method. This data element is required. q2QuantityMethodOther RR (RPT) RR2013 Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the injection flow meter. This data element is required. q2QuantityMissingProcedures RR (RPT) RR2015 Volumetric flow through the injection flow meter in Q3. This data element is required. q3Quantity RR (RPT) RR2016 Volumetric flow through the injection flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3Quantity RR (RPT) RR2018 Standard or method used to calculate the volumetric flow through the injection flow meter in Q3. This data element is required. q3QuantityMethod RR (RPT) RR2019 Other Standard or Method. This data element is required. q3QuantityMethodOther RR (RPT) RR2020 Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the injection flow meter. This data element is required. q3QuantityMissingProcedures RR (RPT) RR2022 Volumetric flow through the injection flow meter in Q4. This data element is required. q4Quantity RR (RPT) RR2023 Volumetric flow through the injection flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4Quantity RR (RPT) RR2025 Standard or method used to calculate the volumetric flow through the injection flow meter in Q4. This data element is required. q4QuantityMethod RR (RPT) RR2026 Other Standard or Method. This data element is required. q4QuantityMethodOther RR (RPT) RR2027 Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the injection flow meter. This data element is required. q4QuantityMissingProcedures RR (RPT) RR2029 Mass flow through the injection flow meter in Q1. This data element is required. q1Quantity RR (RPT) RR2030 Mass flow through the injection flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1Quantity RR (RPT) RR2032 Standard or method used to calculate the mass flow through the injection flow meter in Q1. This data element is required. q1QuantityMethod RR (RPT) RR2033 Other Standard or Method. This data element is required. q1QuantityMethodOther RR (RPT) RR2034 Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the injection flow meter. This data element is required q1QuantityMissingProcedures RR (RPT) RR2036 Mass flow through the injection flow meter in Q2. This data element is required. q2Quantity RR (RPT) RR2037 Mass flow through the injection flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2Quantity RR (RPT) RR2039 Standard or method used to calculate the mass flow through the injection flow meter in Q2. This data element is required. q2QuantityMethod RR (RPT) RR2040 Other Standard or Method. This data element is required. q2QuantityMethodOther RR (RPT) RR2041 Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the injection flow meter. This data element is required q2QuantityMissingProcedures RR (RPT) RR2043 Mass flow through the injection flow meter in Q3. This data element is required. q3Quantity RR (RPT) RR2044 Mass flow through the injection flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3Quantity RR (RPT) RR2046 Standard or method used to calculate the mass flow through the injection flow meter in Q3. This data element is required. q3QuantityMethod RR (RPT) RR2047 Other Standard or Method. This data element is required. q3QuantityMethodOther RR (RPT) RR2048 Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the injection flow meter. This data element is required q3QuantityMissingProcedures RR (RPT) RR2050 Mass flow through the injection flow meter in Q4. This data element is required. q4Quantity RR (RPT) RR2051 Mass flow through the injection flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4Quantity RR (RPT) RR2053 Standard or method used to calculate the mass flow through the injection flow meter in Q4. This data element is required. q4QuantityMethod RR (RPT) RR2054 Other Standard or Method. This data element is required. q4QuantityMethodOther RR (RPT) RR2055 Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the injection flow meter. This data element is required q4QuantityMissingProcedures RR (RPT) RR2057 CO2 concentration in the flow in Q1. This data element is required. q1Co2Concentration RR (RPT) RR2058 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q1Co2Concentration RR (RPT) RR2060 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. q1Co2ConcentrationMethod RR (RPT) RR2061 Other Standard or Method. This data element is required. q1Co2ConcentrationMethodOther RR (RPT) RR2062 Were substitute data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. q1Co2ConcentrationMissingProceduresUsed RR (RPT) RR2063 CO2 concentration in the flow in Q2. This data element is required. q2Co2Concentration RR (RPT) RR2064 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q2Co2Concentration RR (RPT) RR2066 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. q2Co2ConcentrationMethod RR (RPT) RR2067 Other Standard or Method. This data element is required. q2Co2ConcentrationMethodOther RR (RPT) RR2068 Were substitute data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. q2Co2ConcentrationMissingProceduresUsed RR (RPT) RR2069 CO2 concentration in the flow in Q3. This data element is required. q3Co2Concentration RR (RPT) RR2070 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q3Co2Concentration RR (RPT) RR2072 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. q3Co2ConcentrationMethod RR (RPT) RR2073 Other Standard or Method. This data element is required. q3Co2ConcentrationMethodOther RR (RPT) RR2074 Were substitute data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. q3Co2ConcentrationMissingProceduresUsed RR (RPT) RR2075 CO2 concentration in the flow in Q4. This data element is required. q4Co2Concentration RR (RPT) RR2076 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q4Co2Concentration RR (RPT) RR2078 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. q4Co2ConcentrationMethod RR (RPT) RR2079 Other Standard or Method. This data element is required. q4Co2ConcentrationMethodOther RR (RPT) RR2080 Were substitute data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. q4Co2ConcentrationMissingProceduresUsed RR (RPT) RR2081 CO2 concentration in the flow in Q1. This data element is required. q1Co2Concentration RR (RPT) RR2082 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q1Co2Concentration RR (RPT) RR2084 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. q1Co2ConcentrationMethod RR (RPT) RR2085 Other Standard or Method. This data element is required. q1Co2ConcentrationMethodOther RR (RPT) RR2086 Were substitute data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. q1Co2ConcentrationMissingProceduresUsed RR (RPT) RR2087 CO2 concentration in the flow in Q2. This data element is required. q2Co2Concentration RR (RPT) RR2088 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q2Co2Concentration RR (RPT) RR2090 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. q2Co2ConcentrationMethod RR (RPT) RR2091 Other Standard or Method. This data element is required. q2Co2ConcentrationMethodOther RR (RPT) RR2092 Were substitute data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. q2Co2ConcentrationMissingProceduresUsed RR (RPT) RR2093 CO2 concentration in the flow in Q3. This data element is required. q3Co2Concentration RR (RPT) RR2094 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q3Co2Concentration RR (RPT) RR2096 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. q3Co2ConcentrationMethod RR (RPT) RR2097 Other Standard or Method. This data element is required. q3Co2ConcentrationMethodOther RR (RPT) RR2098 Were substitute data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. q3Co2ConcentrationMissingProceduresUsed RR (RPT) RR2099 CO2 concentration in the flow in Q4. This data element is required. q4Co2Concentration RR (RPT) RR2100 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q4Co2Concentration RR (RPT) RR2102 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. q4Co2ConcentrationMethod RR (RPT) RR2103 Other Standard or Method. This data element is required. q4Co2ConcentrationMethodOther RR (RPT) RR2104 Were substitute data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. q4Co2ConcentrationMissingProceduresUsed RR (RPT) RR2105 Total net mass of CO2 injected annually. This data element is required. systemCalculatedUnroundedCo2 RR (RPT) RR2108 Total net mass of CO2 injected annually. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 RR (RPT) RR2109 Total net mass of CO2 received annually. This data element is required. officialUnroundedCo2 RR (RPT) RR3001 Volumetric flow through the separator flow meter in Q1. This data element is required. q1Quantity RR (RPT) RR3002 Volumetric flow through the separator flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1Quantity RR (RPT) RR3004 Standard or method used to calculate the volumetric flow through the separator flow meter in Q1. This data element is required. q1QuantityMethod RR (RPT) RR3005 Other Standard or Method. This data element is required. q1QuantityMethodOther RR (RPT) RR3006 Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the separator flow meter. This data element is required. q1QuantityMissingProcedures RR (RPT) RR3008 Volumetric flow through the separator flow meter in Q2. This data element is required. q2Quantity RR (RPT) RR3009 Volumetric flow through the separator flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2Quantity RR (RPT) RR3011 Standard or method used to calculate the volumetric flow through the separator flow meter in Q2. This data element is required. q2QuantityMethod RR (RPT) RR3012 Other Standard or Method. This data element is required. q2QuantityMethodOther RR (RPT) RR3013 Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the separator flow meter. This data element is required. q2QuantityMissingProcedures RR (RPT) RR3015 Volumetric flow through the separator flow meter in Q3. This data element is required. q3Quantity RR (RPT) RR3016 Volumetric flow through the separator flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3Quantity RR (RPT) RR3018 Standard or method used to calculate the volumetric flow through the separator flow meter in Q3. This data element is required. q3QuantityMethod RR (RPT) RR3019 Other Standard or Method. This data element is required. q3QuantityMethodOther RR (RPT) RR3020 Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the separator flow meter. This data element is required. q3QuantityMissingProcedures RR (RPT) RR3022 Volumetric flow through the separator flow meter in Q4. This data element is required. q4Quantity RR (RPT) RR3023 Volumetric flow through the separator flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4Quantity RR (RPT) RR3025 Standard or method used to calculate the volumetric flow through the separator flow meter in Q4. This data element is required. q4QuantityMethod RR (RPT) RR3026 Other Standard or Method. This data element is required. q4QuantityMethodOther RR (RPT) RR3027 Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the separator flow meter. This data element is required. q4QuantityMissingProcedures RR (RPT) RR3029 Mass flow through the separator flow meter in Q1. This data element is required. q1Quantity RR (RPT) RR3030 Mass flow through the separator flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q1Quantity RR (RPT) RR3032 Standard or method used to calculate the mass flow through the separator flow meter in Q1. This data element is required. q1QuantityMethod RR (RPT) RR3033 Other Standard or Method. This data element is required. q1QuantityMethodOther RR (RPT) RR3034 Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the separator flow meter. This data element is required q1QuantityMissingProcedures RR (RPT) RR3036 Mass flow through the separator flow meter in Q2. This data element is required. q2Quantity RR (RPT) RR3037 Mass flow through the separator flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q2Quantity RR (RPT) RR3039 Standard or method used to calculate the mass flow through the separator flow meter in Q2. This data element is required. q2QuantityMethod RR (RPT) RR3040 Other Standard or Method. This data element is required. q2QuantityMethodOther RR (RPT) RR3041 Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the separator flow meter. This data element is required q2QuantityMissingProcedures RR (RPT) RR3043 Mass flow through the separator flow meter in Q3. This data element is required. q3Quantity RR (RPT) RR3044 Mass flow through the separator flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q3Quantity RR (RPT) RR3046 Standard or method used to calculate the mass flow through the separator flow meter in Q3. This data element is required. q3QuantityMethod RR (RPT) RR3047 Other Standard or Method. This data element is required. q3QuantityMethodOther RR (RPT) RR3048 Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the separator flow meter. This data element is required q3QuantityMissingProcedures RR (RPT) RR3050 Mass flow through the separator flow meter in Q4. This data element is required. q4Quantity RR (RPT) RR3051 Mass flow through the separator flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. q4Quantity RR (RPT) RR3053 Standard or method used to calculate the mass flow through the separator flow meter in Q4. This data element is required. q4QuantityMethod RR (RPT) RR3054 Other Standard or Method. This data element is required. q4QuantityMethodOther RR (RPT) RR3055 Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the separator flow meter. This data element is required q4QuantityMissingProcedures RR (RPT) RR3057 CO2 concentration in the flow in Q1. This data element is required. q1Co2Concentration RR (RPT) RR3058 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q1Co2Concentration RR (RPT) RR3060 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. q1Co2ConcentrationMethod RR (RPT) RR3061 Other Standard or Method. This data element is required. q1Co2ConcentrationMethodOther RR (RPT) RR3062 Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. q1Co2ConcentrationMissingProceduresUsed RR (RPT) RR3063 CO2 concentration in the flow in Q2. This data element is required. q2Co2Concentration RR (RPT) RR3064 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q2Co2Concentration RR (RPT) RR3066 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. q2Co2ConcentrationMethod RR (RPT) RR3067 Other Standard or Method. This data element is required. q2Co2ConcentrationMethodOther RR (RPT) RR3068 Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. q2Co2ConcentrationMissingProceduresUsed RR (RPT) RR3069 CO2 concentration in the flow in Q3. This data element is required. q3Co2Concentration RR (RPT) RR3070 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q3Co2Concentration RR (RPT) RR3072 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. q3Co2ConcentrationMethod RR (RPT) RR3073 Other Standard or Method. This data element is required. q3Co2ConcentrationMethodOther RR (RPT) RR3074 Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. q3Co2ConcentrationMissingProceduresUsed RR (RPT) RR3075 CO2 concentration in the flow in Q4. This data element is required. q4Co2Concentration RR (RPT) RR3076 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q4Co2Concentration RR (RPT) RR3078 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. q4Co2ConcentrationMethod RR (RPT) RR3079 Other Standard or Method. This data element is required. q4Co2ConcentrationMethodOther RR (RPT) RR3080 Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. q4Co2ConcentrationMissingProceduresUsed RR (RPT) RR3081 CO2 concentration in the flow in Q1. This data element is required. q1Co2Concentration RR (RPT) RR3082 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q1Co2Concentration RR (RPT) RR3084 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. q1Co2ConcentrationMethod RR (RPT) RR3085 Other Standard or Method. This data element is required. q1Co2ConcentrationMethodOther RR (RPT) RR3086 Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. q1Co2ConcentrationMissingProceduresUsed RR (RPT) RR3087 CO2 concentration in the flow in Q2. This data element is required. q2Co2Concentration RR (RPT) RR3088 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q2Co2Concentration RR (RPT) RR3090 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. q2Co2ConcentrationMethod RR (RPT) RR3091 Other Standard or Method. This data element is required. q2Co2ConcentrationMethodOther RR (RPT) RR3092 Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. q2Co2ConcentrationMissingProceduresUsed RR (RPT) RR3093 CO2 concentration in the flow in Q3. This data element is required. q3Co2Concentration RR (RPT) RR3094 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q3Co2Concentration RR (RPT) RR3096 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. q3Co2ConcentrationMethod RR (RPT) RR3097 Other Standard or Method. This data element is required. q3Co2ConcentrationMethodOther RR (RPT) RR3098 Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. q3Co2ConcentrationMissingProceduresUsed RR (RPT) RR3099 CO2 concentration in the flow in Q4. This data element is required. q4Co2Concentration RR (RPT) RR3100 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. q4Co2Concentration RR (RPT) RR3102 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. q4Co2ConcentrationMethod RR (RPT) RR3103 Other Standard or Method. This data element is required. q4Co2ConcentrationMethodOther RR (RPT) RR3104 Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. q4Co2ConcentrationMissingProceduresUsed RR (RPT) RR3105 Total net mass of CO2 produced annually. This data element is required. systemCalculatedUnroundedCo2 RR (RPT) RR3108 Total net mass of CO2 produced annually. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 RR (RPT) RR3109 The entrained CO2 in produced oil or other fluid divided by the CO2 separated through all separators in the reporting year. This data element is required. entrainedCO2DividedBySeparators RR (RPT) RR3111 Total net mass of CO2 received annually. This data element is required. officialUnroundedCo2 RR (RPT) RR3112 Cumulative mass of CO2 (metric tons) reported as sequestered in subsurface geologic formations in all years since the well or group of wells became subject to reporting requirements under this subpart. You have indicated that you want to override this value, and did not input a new value. cummulativeMassCO2Override RR (RPT) RR3113 Annual CO2 received. This data element is required. officialUnroundedCo2 RR (RPT) RR4001 You have selected Subpart RR for reporting, but you have not yet added a flow meter or container. fmUnits RR (RPT) RR4002 You have selected Subpart RR for reporting, but you have not yet added an injection flow meter. ifUnits RR (RPT) RR4003 You have selected Subpart RR for reporting, but you have not yet added a separator flow meter. sfUnits RR (RPT) RR4005 Equation used to calculate annual mass of CO2 sequestered. This data element is required. rrEquation RR (RPT) RR4006 Mass of CO2 emitted annually from equipment leaks and vented emissions of CO2 from equipment located on the surface between the flow meter used to measure injection quantity and the injection wellhead. This data element is required. equipmentLeaksInjectionCo2 RR (RPT) RR4007 Mass of CO2 emitted annually from equipment leaks and vented emissions of CO2 from equipment located on the surface between the production wellhead and the flow meter used to measure production quantity. This data element is required. equipmentLeaksProductionCo2 RR (RPT) RR4008 Sources of CO2 Received. This data element is required. co2Sources RR (RPT) RR4009 Does the facility have an approved MRV plan? This data element is required. hasMRVPlan RR (RPT) RR4010 EPA approval date of most recently approved MRV plan. This data element is required. latestMRVPlanApprovalDate RR (RPT) RR4011 MRV Plan approval number that was issued by EPA. This data element is required. issuedMRVPlanApprovalNumber RR (RPT) RR4012 Measurement Type. This data element is required. measurementType RR (RPT) RR4013 Is CO2 received at the facility mixed with other supplies of CO2 or are the procedures in 98.444(a)(4) followed? This data element is required. co2Injection RR (RPT) RR4014 Measurement Type. This data element is required. measurementType RR (RPT) RR4015 Location of flow meter. This data element is required. location RR (RPT) RR4016 Measurement Type. This data element is required. measurementType RR (RPT) RR4017 Mass of CO2 emitted through the pathway in the reporting year. This data element is required. officialUnroundedCo2 RR (RPT) RR4018 Please select a file to upload. file.size RR (RPT) RR4020 Identification Number. Row {1}. This data element is required. wellID RR (RPT) RR4021 Underground Injection Control Permit Class. Row {1}. This data element is required. permitClass RR (RPT) RR4022 ID For The Legal Instrument Authorizing Geologic Sequestration. This data element is required. instrumentID RR (RPT) RR4023 You have selected Subpart RR for reporting, but you have not yet uploaded an annual monitoring report. hasAnnualMonitoringReport RR (RPT) RR4024 You have selected Subpart RR for reporting, but you have not yet added an injection well. hasInjectionWells RR (RPT) RR4026 Date the facility began collecting data for calculating total amount sequestered according to §98.448(a)(7) of this subpart. This data element is required. dataCollectionStartDate RR (RPT) RR4027 Identification Number. Row {1}. This identification number is already used. transientData['nameAlreadyUsed'] RR (RPT) RR5001 GHGRP ID (Facility and injection wells tab, cell D20). This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID RR (RPT) RR5002 Reporting Period (Facility and injection wells tab, cell D1). This data element is required and must be equal to the expected reporting year. reportingPeriod RR (RPT) RR5003 Name or ID. Please provide a numerical identifier; use of alphabetic characters is not permitted. transientData['isNameIDNumeric'] RR (RPT) UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName RR (RPT) UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType S CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML S CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits S CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml S CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions S CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs S CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt S CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow S CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture S CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow S CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits S CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions S CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission S CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission S CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission S CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission S CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> S CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 S CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs S CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt S CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate S CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate S CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType S CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate S CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] S CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] S CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] S CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] S CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] S CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] S CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] S CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] S CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName S CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted S CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission S CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission S CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted S CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions S CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate S CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate S CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate S CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate S S001 Beginning of year inventory. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. beginningOfYearInventory S S002 End of year inventory. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. endOfYearInventory S S003 Quantity of calcined-lime product sold determination method for month(s) [{1}]. This data element is required. clacinedLimeProductSoldDeterminationMethod S S004 Quantity of calcined-lime product sold determination method for month(s) [{1}]. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. clacinedLimeProductSoldDeterminationOtherMethod S S027 CaO content determination method for month(s) [{1}]. This data element is required. caOContentDeterminationMethod S S028 CaO content determination method for month(s) [{1}]. You selected "NLA Protocol method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. caOContentDeterminationOtherMethod S S051 MgO content determination method for month(s) [{1}]. This data element is required. mgOContentDeterminationMethod S S052 MgO content determination method for month(s) [{1}]. You selected "NLA Protocol method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. mgOContentDeterminationOtherMethod S S0700 Facility Name. This data element is required. facilityName S S0701 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. ghgrpID S S0702 Reporting Period. This data element is required and must be equal to the expected reporting year. reportingPeriod S S0703 Type of lime product produced during the reporting year (98.196(a)). This data element is required. producedType S S0704 If "Other" lime product is produced, enter description. If "Type of lime product produced during the reporting year" is reported as "Other," this data element is required. producedTypeOtherDescription S S0705 Beginning of year inventory of lime product produced (tons, 98.196(a)(3)). This data element is required. beginningOfYearInventoryInTons S S0706 End of year inventory of lime product produced (tons, 98.196(a)(3)). This data element is required. endOfYearInventoryInTons S S0707 Annual quantity of lime product sold (tons, 98.196(a)(6)). This data element is required. annualQuantitySoldInTons S S0708 Method used to determine the quantity produced and sold (98.196(a)(1)). This data element is required. methodUsed S S0709 If "Other" method is used, enter description. If "Method used to determine the quantity produced and sold" is reported as "Other," this data element is required. methodUsedOtherDescription S S0710 Is the annual quantity sold based on one more substitute data values? (98.3(c )(8)). This data element is required. isAnnualSoldBasedOnOneOrMoreSubstitutes S S0711 Annual quantity of lime product not sold (tons, 98.196(a)(8)). This data element is required. annualNotSoldInTons S S0712 Is the annual quantity of calcined lime byproduct /waste not sold based on one or more substitute data values? (98.3(c)(8)). This data element is required. isNotSoldBasedOnOneOrMoreSubstitutes S S0713 Type of calcined lime byproduct or calcined lime waste generated during the reporting year (98.196(a)). This data element is required. generatedType S S0714 Beginning of year inventory of calcined lime byproduct or calcined lime waste sold (tons, 98.196(a)(4)). This data element is required. beginningOfYearInventoryInTons S S0715 End of year inventory of calcined lime byproduct or calcined lime waste sold (tons, 98.196(a)(4)). This data element is required. endOfYearInventoryInTons S S0716 Annual quantity of calcined lime byproduct/waste sold (tons, 98.196(a)(5)). This data element is required. annualQuantitySoldInTons S S0717 Method used to determine the quantity of calcined lime byproduct/ waste sold (98.196(a)(2)). This data element is required. methodUsed S S0718 If "Other" method is used, enter description. If "Method used to determine the quantity of calcine lime byproduct/waste sold" is reported as "Other," this data element is required. methodUsedOtherDescription S S0719 Is the annual quantity of calcined lime byproduct/waste sold based on one or more substitute data values? (98.3(c)(8)). This data element is required. isAnnualSoldBasedOnOneOrMoreSubstitutes S S0720 Annual quantity of calcined lime byproduct/waste not sold (tons, 98.196(a)(7)). This data element is required. annualNotSoldInTons S S0721 Is the annual quantity of calcined lime byproduct/waste not sold based on one or more substitute data values? (98.3)(c)(8)). This data element is required. isNotSoldBasedOnOneOrMoreSubstitutes S S0722 Part 2a - Lime Product Information. Table must have at least one lime product. limeProductInformation S S0723 Part 2b - Calcined-lime Byproduct/Waste Information. Table must have at least one calcined lime by-product or waste row. calcinedLimeByproductOrWasteInformation S S075 Beginning of year inventory. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. beginningOfYearInventory S S076 End of year inventory. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. endOfYearInventory S S077 Quantity of lime product produced determination method for month(s) [{1}]. This data element is required. limeProductProducedDeterminationMethod S S078 Quantity of lime product produced determination method for month(s) [{1}]. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. limeProductProducedDeterminationOtherMethod S S0799 CEMS Unit Summary. One or more CEMS Units are required. transientData S S101 Quantity of lime product sold determination method for month(s) [{1}]. This data element is required. limeProductSoldDeterminationMethod S S102 Quantity of lime product sold determination method for month(s) [{1}]. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. limeProductSoldDeterminationOtherMethod S S125 CaO content determination method for month(s) [{1}]. This data element is required. caOContentDeterminationMethod S S137 MgO content determination method for month(s) [{1}]. This data element is required. mgOContentDeterminationMethod S S149 Name of Product. This data element is required. Please enter the required data or click CANCEL. name S S150 Was this calcined-lime by-product or waste sold during the reporting year? This data element is required. Please make a selection or click CANCEL. isCalcinedLimeByProductSold S S151 Name of Product. This data element is required. Please enter the required data or click CANCEL. name S S155 Annual lime production capacity for the entire facility. This data element is required. annualLimeProduction S S156 Annual lime production capacity for the entire facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualLimeProduction S S158 If CO2 was used on-site, the annual quantity used. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualCO2CapturedOnSite S S160 If CO2 was used on-site, the method used to determine the amount. This data element is required. cO2MeasurementMethod S S161 If CO2 was used on-site, the method used to determine the amount. You selected "Other method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. cO2OtherMeasurementMethodDesc S S162 If CO2 was used on-site, the annual quantity used. This data element is required. annualCO2CapturedOnSite S S163 Lime Product Type. This data element is required. limeProductType S S164 Lime Product Type. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. limeProductOtherType S S165 Beginning of year inventory. This data element is required. beginningOfYearInventory S S166 End of year inventory. This data element is required. endOfYearInventory S S167 CaO content determination method for month(s) [{1}]. You selected "NLA Protocol method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. caOContentDeterminationOtherMethod S S179 MgO content determination method for month(s) [{1}]. You selected "NLA Protocol method" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. mgOContentDeterminationOtherMethod S S191 Beginning of year inventory. This data element is required. beginningOfYearInventory S S192 End of year inventory. This data element is required. endOfYearInventory S S194 Methodology type is required. Please select the methodology type or click cancel. monitoredByCems S S199 You have not reviewed or answered questions about substitute data procedures for this by-product or waste. Click on this message to review these questions and click SAVE even if you do not check any of the boxes, in order to confirm that you have reviewed these questions. name S S202 You have not uploaded a reporting form file. jctSubPartFacility S S203 You have not added a lime product. subPartSLimeProductList S S204 You have not added a calcined lime by-product or waste. subPartSCalcinedLimeByProductList S S205 You have not selected the Subpart S calculation methodology for your facility. monitoredByCems S S206 CaO content determination method for month(s) [{1}]. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. caOContentDeterminationOtherMethod S S218 MgO content determination method for month(s) [{1}]. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. mgOContentDeterminationOtherMethod S S230 CaO content determination method for month(s) [{1}]. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. caOContentDeterminationOtherMethod S S242 MgO content determination method for month(s) [{1}]. You selected "Other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. mgOContentDeterminationOtherMethod S S263 Was CO2 used on site? This data element is required. Please make a selection or click CANCEL. isCo2OnSite S UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName S UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType SS SS0002 Reporting Period. This data element is required and must be the same as the calendar year for which data is reported. reportingPeriod SS SS005 You have selected Subpart SS for reporting, but you have not yet uploaded a reporting form file. jctSubPartFacility SS SS0374 Sulfur Hexafluoride: If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data were missing. missingDataEfcValueSF6Reason SS SS0375 Sulfur Hexafluoride: If missing data procedures were used for total number of filling operations for each valve combination (FCiv in Equation SS-5), you must provide a reason the data were missing. missingDataTotalNumfillOperationSF6Reason SS SS0376 PFC-14 (Perfluoromethane): If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data were missing. missingDataEfcValuePFC14Reason SS SS0377 PFC-14 (Perfluoromethane): If missing data procedures were used for the total number of filling operations for each valve combination, you must provide a reason the data were missing. missingDataTotalNumfillOperationPFC14Reason SS SS0378 PFC-116 (Perfluoroethane): If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data were missing. missingDataEfcValuePFC116Reason SS SS0379 PFC-116 (Perfluoroethane): If missing data procedures were used for the total number of filling operations for each valve combination, you must provide a reason the data were missing. missingDataTotalNumfillOperationPFC116Reason SS SS0380 PFC-218 (Perfluoropropane): If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data were missing. missingDataEfcValuePFC218Reason SS SS0381 PFC-218 (Perfluoropropane): If missing data procedures were used for the total number of filling operations for each valve combination, you must provide a reason the data were missing. missingDataTotalNumfillOperationPFC218Reason SS SS0382 Perfluorocyclopropane: If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data were missing. missingDataEfcValueCC3F6Reason SS SS0383 Perfluorocyclopropane: If missing data procedures were used for the total number of filling operations for each valve combination, you must provide a reason the data were missing. missingDataTotalNumfillOperationCC3F6Reason SS SS0386 Perfluorocyclobutane: If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data were missing. missingDataEfcValueCC4F8Reason SS SS0387 Perfluorocyclobutane: If missing data procedures were used for the total number of filling operations for each valve combination, you must provide a reason the data were missing. missingDataTotalNumfillOperationCC4F8Reason SS SS0388 PFC-4-1-12 (Perfluoropentane): If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data were missing. missingDataEfcValuePFC4112Reason SS SS0389 PFC-4-1-12 (Perfluoropentane): If missing data procedures were used for the total number of filling operations for each valve combination, you must provide a reason the data were missing. missingDataTotalNumfillOperationPFC4112Reason SS SS0390 PFC-5-1-14 (Perfluorohexane): If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data are missing. missingDataEfcValuePFC5114Reason SS SS0391 PFC-5-1-14 (Perfluorohexane): If missing data procedures were used for the total number of filling operations for each valve combination, you must provide a reason the data are missing. missingDataTotalNumfillOperationPFC5114Reason SS SS0392 PFC-9-1-18: If missing data procedures were used for determining the value for EFC for the hose and valve combination, you must provide a reason the data are missing. missingDataEfcValuePFC9118Reason SS SS0393 PFC-9-1-18: If missing data procedures were used for the total number of filling operations for each valve combination, you must provide a reason the data are missing. missingDataTotalNumfillOperationPFC9118Reason SS SS0394 Please indicate whether you used the method specified in 98.453(h). This data element is required. methodSpecified SS SS0395 Sulfur Hexafluoride: If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValueSF6Reason SS SS0396 Sulfur Hexafluoride: If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesSF6Reason SS SS0397 PFC-14 (Perfluoromethane): If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValuePFC14Reason SS SS0398 PFC-14 (Perfluoromethane): If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesPFC14Reason SS SS0399 PFC-116 (Perfluoroethane): If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValuePFC116Reason SS SS0400 PFC-116 (Perfluoroethane): If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesPFC116Reason SS SS0401 PFC-218 (Perfluoropropane): If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValuePFC218Reason SS SS0402 PFC-218 (Perfluoropropane): If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesPFC218Reason SS SS0403 Perfluorocyclopropane: If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValueCC3F6Reason SS SS0404 Perfluorocyclopropane: If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesCC3F6Reason SS SS0405 PFC-3-1-10 (Perfluorobutane): If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValuePFC3110Reason SS SS0406 PFC-3-1-10 (Perfluorobutane): If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesPFC3110Reason SS SS0407 Perfluorocyclobutane: If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValueCC4F8Reason SS SS0408 Perfluorocyclobutane: If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesCC4F8Reason SS SS0409 PFC-4-1-12 (Perfluoropentane): If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValuePFC4112Reason SS SS0410 PFC-4-1-12 (Perfluoropentane): If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesPFC4112Reason SS SS0411 PFC-5-1-14 (Perfluorohexane): If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValuePFC5114Reason SS SS0412 PFC-5-1-14 (Perfluorohexane): If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesPFC5114Reason SS SS0413 PFC-9-1-18: If missing data procedures were used for the mean value, you must provide a reason the data were missing. missingDataMeanValuePFC9118Reason SS SS0414 PFC-9-1-18: If missing data procedures were used for the number of samples, you must provide a reason the data were missing. missingDataNumofSamplesPFC9118Reason SS SS0416 Sulfur Hexafluoride: Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValueSF6 SS SS0417 Sulfur Hexafluoride: Were missing data procedures used for the total number of filling operations for each valve combination (FCiv in Equation SS-5)? This data element is required. missingDataTotalNumfillOperationSF6 SS SS0418 PFC-14 (Perfluoromethane): Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValuePFC14 SS SS0419 PFC-14 (Perfluoromethane): Were missing data procedures used for the total number of filling operations for each valve combination (FCiv in Equation SS-5)? This data element is required. missingDataTotalNumfillOperationPFC14 SS SS0420 PFC-116 (Perfluoroethane): Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValuePFC116 SS SS0421 PFC-116 (Perfluoroethane): Were missing data procedures used for the total number of filling operations for each valve combination (FCiv in Equation SS-5)? This data element is required. missingDataTotalNumfillOperationPFC116 SS SS0422 PFC-218 (Perfluoropropane): Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValuePFC218 SS SS0423 PFC-218 (Perfluoropropane): Were missing data procedures used for the total number of filling operations for each valve combination (FCiv in Equation SS-5)? This data element is required. missingDataTotalNumfillOperationPFC218 SS SS0424 Perfluorocyclopropane: Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValueCC3F6 SS SS0425 Perfluorocyclopropane: Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataTotalNumfillOperationCC3F6 SS SS0428 Perfluorocyclobutane: Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValueCC4F8 SS SS0429 Perfluorocyclobutane: Were missing data procedures used for the total number of filling operations for each valve combination (FCiv in Equation SS-5)? This data element is required. missingDataTotalNumfillOperationCC4F8 SS SS0430 PFC-4-1-12 (Perfluoropentane): Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValuePFC4112 SS SS0431 PFC-4-1-12 (Perfluoropentane): Were missing data procedures used for the total number of filling operations for each valve combination (FCiv in Equation SS-5)? This data element is required. missingDataTotalNumfillOperationPFC4112 SS SS0432 PFC-5-1-14 (Perfluorohexane): Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValuePFC5114 SS SS0433 PFC-5-1-14 (Perfluorohexane): Were missing data prodecures used for the total number of filling operations for each valve combination (FCiv in Equation SS-5)? This data element is required. missingDataTotalNumfillOperationPFC5114 SS SS0434 PFC-9-1-18: Were missing data procedures used for determining the value for EFC for the hose and valve combination? This data element is required. missingDataEfcValuePFC9118 SS SS0435 PFC-9-1-18: Were missing data prodecures used for the total number of filling operations for each valve combination (FCiv in Equation SS-5)? This data element is required. missingDataTotalNumfillOperationPFC9118 SS SS0436 You must provide a unique identifier for the make, model, and group of conditions. This data element is required. makeModelGroupConditionID SS SS0437 Sulfur Hexafluoride: Were missing data procedures used for the mean value? This data element is required. missingDataMeanValueSF6 SS SS0438 Sulfur Hexafluoride: Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesSF6 SS SS0439 PFC-14 (Perfluoromethane): Were missing data procedures used for the mean value? This data element is required. missingDataMeanValuePFC14 SS SS0440 PFC-14 (Perfluoromethane): Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesPFC14 SS SS0441 PFC-116 (Perfluoroethane): Were missing data procedures used for the mean value? This data element is required. missingDataMeanValuePFC116 SS SS0442 PFC-116 (Perfluoroethane): Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesPFC116 SS SS0443 PFC-218 (Perfluoropropane): Were missing data procedures used for the mean value? This data element is required. missingDataMeanValuePFC218 SS SS0444 PFC-218 (Perfluoropropane): Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesPFC218 SS SS0445 Perfluorocyclopropane: Were missing data procedures used for the mean value? This data element is required. missingDataMeanValueCC3F6 SS SS0446 Perfluorocyclopropane: Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesCC3F6 SS SS0447 PFC-3-1-10 (Perfluorobutane): Were missing data procedures used for the mean value? This data element is required. missingDataMeanValuePFC3110 SS SS0448 PFC-3-1-10 (Perfluorobutane): Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesPFC3110 SS SS0449 Perfluorocyclobutane: Were missing data procedures used for the mean value? This data element is required. missingDataMeanValueCC4F8 SS SS0450 Perfluorocyclobutane: Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesCC4F8 SS SS0451 PFC-4-1-12 (Perfluoropentane): Were missing data procedures used for the mean value? This data element is required. missingDataMeanValuePFC4112 SS SS0452 PFC-4-1-12 (Perfluoropentane): Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesPFC4112 SS SS0453 PFC-5-1-14 (Perfluorohexane): Were missing data procedures used for the mean value? This data element is required. missingDataMeanValuePFC5114 SS SS0454 PFC-5-1-14 (Perfluorohexane): Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesPFC5114 SS SS0455 PFC-9-1-18: Were missing data procedures used for the mean value? This data element is required. missingDataMeanValuePFC9118 SS SS0456 PFC-9-1-18: Were missing data procedures used for the number of samples for this GHG? This data element is required. missingDataNumofSamplesPFC9118 SS SS0457 Please indicate whether the reported emissions are estimated values. This data element is required. estimatedGHG SS SS0460 Were missing data procedures used for the pounds of this GHG stored in containers at the beginning of the year? This data element is required. missingDataBeginYr SS SS0461 If missing data procedures were used for the pounds of this GHG stored in containers at the beginning of the year, you must provide a reason the data were missing. missingDataBeginYrReason SS SS0462 Were missing data procedures used for the pounds of this GHG stored in containers at the end of the year? This data element is required. missingDataEndYr SS SS0463 If missing data procedures were used for the pounds of this GHG stored in containers at the end of the year, you must provide a reason the data were missing. missingDataEndYrReason SS SS0464 Were missing data procedures used for the pounds of this GHG purchased in bulk during the year? This data element is required. missingDataBlkPurchase SS SS0465 If missing data procedures were used for the pounds of this GHG purchased in bulk during the year. This data element is required. missingDataBlkPurchaseReason SS SS0466 Were missing data procedures used for the pounds of this GHG returned by equipment users with or inside equipment during the year? This data element is required. missingDataReturnedEqpt SS SS0467 If missing data procedures were used for the pounds of this GHG returned by equipment users with or inside equipment during the year, you must provide a reason the data were missing. missingDataReturnedEqptReason SS SS0468 Were missing data procedures used for the pounds of this GHG returned to the site from offsite after recycling during the year? This data element is required. missingDataRecycle SS SS0469 If missing data procedures were used for the pounds of this GHG returned to the site from offsite recycling, you must provide a reason the data were missing. missingDataRecycleReason SS SS0470 Were missing data procedures used for the pounds of this GHG inside new equipment delivered to customers during the year? This data element is required. missingDataNewEqpt SS SS0471 If missing data procedures were used for the pounds of this GHG inside new equipment delivered to customers during the year, you must provide a reason the data were missing. missingDataNewEqptReason SS SS0472 Were missing data procedures used for the pounds of this GHG delivered to equipment users during the year? This data element is required. missingDataEqptUser SS SS0473 If missing data procedures were used for the pounds of this GHG delivered to equipment users during the year, you must provide a reason the data were missing. missingDataEqptUserReason SS SS0474 Were missing data procedures used for the pounds of this GHG returned to suppliers during the year? This data element is required. missingDataReturnedSuppliers SS SS0475 If missing data procedures were used for the pounds of this GHG returned to suppliers during the year, you must provide a reason the data were missing. missingDataReturnedSuppliersReason SS SS0476 Were missing data procedures used for the pounds of this GHG sent offsite for destruction during the year? This data element is required. missingDataOffsiteDestruction SS SS0477 If missing data procedures were used for the pounds of this GHG sent offsite for destruction during the year, you must provide a reason the data were missing. missingDataOffsiteDestructionReason SS SS0478 Were missing data procedures used for the pounds of this GHG sent offsite to be recycled during the year? This data element is required. missingDataOffsiteRecycle SS SS0479 If missing data procedures were used for the pounds of this GHG sent offsite to be recycled during the year, you must provide a reason the data were missing. missingDataOffsiteRecycleReason SS SS0480 Were missing data procedures used for determining the nameplate capacity of the equipment delivered to customers with GHG inside? This data element is required. missingDataEqptNameplateCapacity SS SS0481 If missing data procedures were used for determining the nameplate capacity of the equipment delivered to customers with GHG inside, you must report the reason the data were missing. This data element is required. missingDataEqptNameplateCapacityReason SS SS0488 Is the nameplate capacity of the equipment, in pounds, delivered to customers with each GHG inside the same as the quantity reported as present inside new equipment delivered to customers? This data element is required. qtyReported SS SS0489 If the nameplate capacity of the equipment delivered to customers with each GHG inside is not the same as the quantity reported as present inside new equipment delivered to customers, you must report the nameplate capacity of the equipment delivered with GHG inside. This data element is required. qtyReportedReason SS SS0490 Nameplate capacity of the equipment delivered with GHG inside. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. qtyReportedReason SS SS0491 Sulfur Hexafluoride: Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled. This data element is required. engineeringMethodSF6 SS SS0492 Was Equation SS-5 used for calculating the parameter EL for this GHG? If you answer "yes" for any GHG you must complete the tab "Equation SS-5". This data element is required. equationSS5 SS SS0493 Was the mass of GHG disbursed to customers in new equipment determined by assuming it is equal to the equipments nameplate capacity or partial shipping charge and using the method in 98.453(h)? If you answer "yes" for any GHG you must complete the tab "98.453(h)". This data element is required. gHGMass SS SS0494 GHGRP ID. You must report the GHGRP ID for this facility. The ID must match the GHGRP ID for the facility. ghgrpID SS SS0495 Sulfur Hexafluoride: Number of samples. This data element is required. numOfSamplesSF6 SS SS0496 Sulfur Hexafluoride: Number of samples. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfSamplesSF6 SS SS0497 Sulfur Hexafluoride: Upper bound on the 95 percent CI. This data element is required. upperBoundSF6 SS SS0499 Sulfur Hexafluoride: Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundSF6 SS SS0500 Sulfur Hexafluoride: If missing data procedures were used for the upper bound on the 95 percent CI, you must report the reason the data were missing. This data element is required. missingDataUpperBoundSF6Reason SS SS0501 Sulfur Hexafluoride: Lower bound on the 95 percent CI. This data element is required. lowerBoundSF6 SS SS0503 Sulfur Hexafluoride: Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundSF6 SS SS0504 Sulfur Hexafluoride: If missing data procedures were used for the lower bound on the 95 percent CI, you must provide a reason the data were missing. This data element is required. missingDataLowerBoundSF6Reason SS SS0505 PFC-14 (Perfluoromethane): Number of samples. This data element is required. numOfSamplesPFC14 SS SS0507 PFC-14 (Perfluoromethane): Upper bound on the 95 percent CI. This data element is required. upperBoundPFC14 SS SS0509 PFC-14 (Perfluoromethane): Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundPFC14 SS SS0510 PFC-14 (Perfluoromethane): If missing data procedures were used for the upper bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataUpperBoundPFC14Reason SS SS0511 PFC-14 (Perfluoromethane): Lower bound on the 95 percent CI. This data element is required. lowerBoundPFC14 SS SS0513 PFC-14 (Perfluoromethane): Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundPFC14 SS SS0514 PFC-14 (Perfluoromethane): If missing data procedures were used for the lower bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataLowerBoundPFC14Reason SS SS0515 PFC-116 (Perfluoroethane): Number of samples. This data element is required. numOfSamplesPFC116 SS SS0517 PFC-116 (Perfluoroethane): Upper bound on the 95 percent CI. This data element is required. upperBoundPFC116 SS SS0519 PFC-116 (Perfluoroethane): Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundPFC116 SS SS0520 PFC-116 (Perfluoroethane): If missing data procedures were used for the upper bound on the 95 percent CI, you must provide the reason the data are missing. This data element is required. missingDataUpperBoundPFC116Reason SS SS0521 PFC-116 (Perfluoroethane): Lower bound on the 95 percent CI. This data element is required. lowerBoundPFC116 SS SS0523 PFC-116 (Perfluoroethane): Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundPFC116 SS SS0524 PFC-116 (Perfluoroethane): If missing data procedures were used for the lower bound on the 95 percent CI, you must report a reason the data are missing. This data element is required. missingDataLowerBoundPFC116Reason SS SS0525 PFC-218 (Perfluoropropane): Number of samples. This data element is required. numOfSamplesPFC218 SS SS0526 PFC-218 (Perfluoropropane): Number of samples. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfSamplesPFC218 SS SS0527 PFC-218 (Perfluoropropane): Upper bound on the 95 percent CI. This data element is required. upperBoundPFC218 SS SS0528 PFC-218 (Perfluoropropane): Upper bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. upperBoundPFC218 SS SS0529 PFC-218 (Perfluoropropane): Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundPFC218 SS SS0530 PFC-218 (Perfluoropropane): If missing data procedures were used for the upper bound on the 95 percent CI, you must report a reason the data are missing. This data element is required. missingDataUpperBoundPFC218Reason SS SS0531 PFC-218 (Perfluoropropane): Lower bound on the 95 percent CI. This data element is required. lowerBoundPFC218 SS SS0532 PFC-218 (Perfluoropropane): Lower bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. lowerBoundPFC218 SS SS0533 PFC-218 (Perfluoropropane): Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundPFC218 SS SS0534 PFC-218 (Perfluoropropane): If missing data procedures were used for the lower bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataLowerBoundPFC218Reason SS SS0535 Perfluorocyclopropane: Number of samples. This data element is required. numOfSamplesCC3F6 SS SS0536 Perfluorocyclopropane: Number of samples. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfSamplesCC3F6 SS SS0537 Perfluorocyclopropane: Upper bound on the 95 percent CI. This data element is required. upperBoundCC3F6 SS SS0538 Perfluorocyclopropane: Upper bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. upperBoundCC3F6 SS SS0539 Perfluorocyclopropane: Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundCC3F6 SS SS0540 Perfluorocyclopropane: If missing data procedures were used for the upper bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataUpperBoundCC3F6Reason SS SS0541 Perfluorocyclopropane: Lower bound on the 95 percent CI. This data element is required. lowerBoundCC3F6 SS SS0542 Perfluorocyclopropane: Lower bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. lowerBoundCC3F6 SS SS0543 Perfluorocyclopropane: Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundCC3F6 SS SS0544 Perfluorocyclopropane: If missing data procedures were used for the lower bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataLowerBoundCC3F6Reason SS SS0545 PFC-3-1-10 (Perfluorobutane): Number of samples. This data element is required. numOfSamplesPFC3110 SS SS0546 PFC-3-1-10 (Perfluorobutane): Number of samples. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfSamplesPFC3110 SS SS0547 PFC-3-1-10 (Perfluorobutane): Upper bound on the 95 percent CI. This data element is required. upperBoundPFC3110 SS SS0548 PFC-3-1-10 (Perfluorobutane): Upper bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. upperBoundPFC3110 SS SS0549 PFC-3-1-10 (Perfluorobutane): Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundPFC3110 SS SS0550 PFC-3-1-10 (Perfluorobutane): If missing data procedures were used for the upper bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataUpperBoundPFC3110Reason SS SS0551 PFC-3-1-10 (Perfluorobutane): Lower bound on the 95 percent CI. This data element is required. lowerBoundPFC3110 SS SS0552 PFC-3-1-10 (Perfluorobutane): Lower bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. lowerBoundPFC3110 SS SS0553 PFC-3-1-10 (Perfluorobutane): Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundPFC3110 SS SS0554 PFC-3-1-10 (Perfluorobutane): If missing data provisions were used for the lower bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataLowerBoundPFC3110Reason SS SS0555 Perfluorocyclobutane: Number of samples. This data element is required. numOfSamplesCC4F8 SS SS0556 Perfluorocyclobutane: Number of samples. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfSamplesCC4F8 SS SS0557 Perfluorocyclobutane: Upper bound on the 95 percent CI. This data element is required. upperBoundCC4F8 SS SS0558 Perfluorocyclobutane: Upper bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. upperBoundCC4F8 SS SS0559 Perfluorocyclobutane: Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundCC4F8 SS SS0560 Perfluorocyclobutane: If missing data procedures were used for the upper bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataUpperBoundCC4F8Reason SS SS0561 Perfluorocyclobutane: Lower bound on the 95 percent CI. This data element is required. lowerBoundCC4F8 SS SS0562 Perfluorocyclobutane: Lower bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. lowerBoundCC4F8 SS SS0563 Perfluorocyclobutane: Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundCC4F8 SS SS0564 Perfluorocyclobutane: If missing data procedures were used for the lower bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataLowerBoundCC4F8Reason SS SS0565 PFC-4-1-12 (Perfluorobutane): Number of samples. This data element is required. numOfSamplesPFC4112 SS SS0566 PFC-4-1-12 (Perfluorobutane): Number of samples. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfSamplesPFC4112 SS SS0567 PFC-4-1-12 (Perfluorobutane): Upper bound on the 95 percent CI. This data element is required. upperBoundPFC4112 SS SS0568 PFC-4-1-12 (Perfluorobutane): Upper bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. upperBoundPFC4112 SS SS0569 PFC-4-1-12 (Perfluorobutane) : Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundPFC4112 SS SS0570 PFC-4-1-12 (Perfluorobutane): If missing data procedures were used for the upper bound on the 95 percent CI, you must provide a reason the data are missiong. This data element is required. missingDataUpperBoundPFC4112Reason SS SS0571 PFC-4-1-12 (Perfluorobutane): Lower bound on the 95 percent CI. This data element is required. lowerBoundPFC4112 SS SS0572 PFC-4-1-12 (Perfluorobutane): Lower bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. lowerBoundPFC4112 SS SS0573 PFC-4-1-12 (Perfluorobutane) : Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundPFC4112 SS SS0574 PFC-4-1-12 (Perfluorobutane): If missing data procedures were used for the lower bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataLowerBoundPFC4112Reason SS SS0575 PFC-5-1-14 (Perfluorohexane): Number of samples. This data element is required. numOfSamplesPFC5114 SS SS0576 PFC-5-1-14 (Perfluorohexane): Number of samples. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfSamplesPFC5114 SS SS0577 PFC-5-1-14 (Perfluorohexane): Upper bound on the 95 percent CI. This data element is required. upperBoundPFC5114 SS SS0579 PFC-5-1-14 (Perfluorohexane) : Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundPFC5114 SS SS0580 PFC-5-1-14 (Perfluorohexane): If missing data procedures were used for the upper bound on the 95 percent CI, you must provide a reason data are missing. This data element is required. missingDataUpperBoundPFC5114Reason SS SS0581 PFC-5-1-14 (Perfluorohexane): Lower bound on the 95 percent CI. This data element is required. lowerBoundPFC5114 SS SS0582 PFC-5-1-14 (Perfluorohexane): Lower bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. lowerBoundPFC5114 SS SS0583 PFC-5-1-14 (Perfluorohexane): Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundPFC5114 SS SS0584 PFC-5-1-14 (Perfluorohexane): If missing data procedures were used for the lower bound on the 95 percent CI, you must provide a reason data are missing. This data element is required. missingDataLowerBoundPFC5114Reason SS SS0585 PFC-9-1-18: Number of samples. This data element is required. numOfSamplesPFC9118 SS SS0586 PFC-9-1-18: Number of samples. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numOfSamplesPFC9118 SS SS0587 PFC-9-1-18: Upper bound on the 95 percent CI. This data element is required. upperBoundPFC9118 SS SS0588 PFC-9-1-18: Upper bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. upperBoundPFC9118 SS SS0589 PFC-9-1-18: Were missing data procedures used for the upper bound on the 95 percent CI for this GHG? This data element is required. missingDataUpperBoundPFC9118 SS SS0590 PFC-9-1-18: If missing data procedures were used for the upper bound on the 95 percent CI, you must provide a reason data are missing. This data element is required. missingDataUpperBoundPFC9118Reason SS SS0591 PFC-9-1-18: Lower bound on the 95 percent CI. This data element is required. lowerBoundPFC9118 SS SS0592 PFC-9-1-18: Lower bound on the 95 percent CI. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. lowerBoundPFC9118 SS SS0593 PFC-9-1-18: Were missing data procedures used for the lower bound on the 95 percent CI for this GHG? This data element is required. missingDataLowerBoundPFC9118 SS SS0594 PFC-9-1-18: If missing data procedures were used for the lower bound on the 95 percent CI, you must provide a reason the data are missing. This data element is required. missingDataLowerBoundPFC9118Reason SS SS0595 Report the method used to estimate the substitute data for pounds of SF6 or PFC stored in containers at the beginning of the year. This data element is required. methodUsedBeginYr SS SS0596 Pounds of SF6 or PFC stored in containers at the beginning of the year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. poundsBeginYr SS SS0597 Pounds of SF6 or PFC stored in containers at the beginning of the year. This data element is required. poundsBeginYr SS SS0598 Pounds of SF6 or PFC stored in containers at the end of the year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. poundsEndYr SS SS0599 Pounds of SF6 or PFC stored in containers at the end of the year. This data element is required. poundsEndYr SS SS0600 Report the method used to estimate the substitute data for pounds of SF6 or PFC stored in containers at the end of the year. This data element is required. methodUsedEndYr SS SS0601 Pounds of SF6 or PFC purchased from chemical producers or suppliers in bulk. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. pndsPurchInBulk SS SS0602 Pounds of SF6 or PFC purchased from chemical producers or suppliers in bulk. This data element is required. pndsPurchInBulk SS SS0603 Report the method used to estimate the substitute data for pounds of SF6 or PFC purchased from chemical producers or suppliers in bulk. This data element is required. methodUsedBlkPurchase SS SS0604 Pounds of SF6 or PFC returned by equipment users. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. pndsRetnEqptUsers SS SS0605 Pounds of SF6 or PFC returned by equipment users. This data element is required. pndsRetnEqptUsers SS SS0606 Report the method used to estimate the substitute data for pounds of SF6 or PFC returned by equipment users. This data element is required. methodUsedReturnedEqpt SS SS0607 Pounds of SF6 or PFC returned from off-site recycling. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. pndsRetnOffRecycling SS SS0608 Pounds of SF6 returned from off-site recycling. This data element is required. pndsRetnOffRecycling SS SS0609 Report the method used to estimate the substitute data for pounds of SF6 returned from off-site recycling. This data element is required. methodUsedRecycle SS SS0610 Pounds of SF6 or PFC contained in new equipment delivered to customers. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. pndsContNewEqptDelivered SS SS0611 Pounds of SF6 or PFC contained in new equipment delivered to customers. This data element is required. pndsContNewEqptDelivered SS SS0612 Report the method used to estimate the substitute data for pounds of SF6 or PFC contained in new equipment delivered to customers. This data element is required. methodUsedNewEqpt SS SS0613 Pounds of SF6 or PFC delivered to equipment users in containers. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. pndsDelEqptInCont SS SS0614 Pounds of SF6 or PFC delivered to equipment users in containers. This data element is required. pndsDelEqptInCont SS SS0615 Report the method used to estimate the substitute data for pounds of SF6 or PFC delivered to equipment users in containers. This data element is required. methodUsedEqptUser SS SS0616 Pounds of SF6 or PFC returned to suppliers. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. pndsRetnToSuppliers SS SS0617 Pounds of SF6 or PFC returned to suppliers. This data element is required. pndsRetnToSuppliers SS SS0618 Report the method used to estimate the substitute data for pounds of SF6 or PFC returned to suppliers. This data element is required. methodUsedReturnedSuppliers SS SS0619 Pounds of SF6 or PFC sent off-site for destruction. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. pndsOffsiteDestruction SS SS0620 Pounds of SF6 or PFC sent off-site for destruction. This data element is required. pndsOffsiteDestruction SS SS0621 Report the method used to estimate the substitute data for pounds of SF6 or PFC sent off-site for destruction. This data element is required. methodUsedOffsiteDestruction SS SS0622 Pounds of SF6 sent off site for recycling. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. pndsOffsiteRecycling SS SS0623 Pounds of SF6 or PFC sent off site for recycling. This data element is required. pndsOffsiteRecycling SS SS0624 Report the method used to estimate the substitute data for pounds of SF6 or PFC sent off-site for recycling. This data element is required. methodUsedOffsiteRecycle SS SS0625 Report the method used to estimate the substitute data for the nameplate capacity of the equipment delivered to customers with SF6 or PFC inside. This data element is required. methodUsedEqptNameplateCapacity SS SS0626 Total annual mass of the SF6 or PFCs, in pounds, used to fill equipment. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalFillEqpt SS SS0627 Total annual mass of the SF6 or PFCs, in pounds, used to fill equipment. This data element is required. totalFillEqpt SS SS0628 Report the method used to estimate the substitute data for total annual mass of the SF6 or PFCs used to fill equipment. This data element is required. methodUsedFillEqptOffsite SS SS0629 Total annual mass of the SF6 or PFCs (in pounds) used to charge the equipment prior to leaving this manufacturing facility. You must enter a value that is greater than or equal to zero. You must correct the current value before submitting your report. totalChargeEqpt SS SS0630 Total annual mass of the SF6 or PFCs (in pounds) used to charge the equipment prior to leaving this manufacturing facility. This data element is required. totalChargeEqpt SS SS0631 Report the method used to estimate the substitute data for total annual mass of the SF6 or PFCs used to charge equipment prior to leaving this manufacturing facility. This data element is required. methodUsedDataChargeEqpt SS SS0632 Total annual nameplate capacity of the equipment, in pounds, installed at electric transmission or distribution facilities. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNameplateCap SS SS0633 Total annual nameplate capacity of the equipment, in pounds, installed at electric transmission or distribution facilities. This data element is required. totalNameplateCap SS SS0634 Report the method used to estimate the substitute data for total annual nameplate capacity of the equipment installed at off-site electric transmission or distribution facilities. This data element is required. methodUsedNameplateCap SS SS0636 SF6: The emission factor for the valve-hose combination Ci (units per A4 or A5). This data element is required. emissionFactorSF6 SS SS0637 SF6: Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasureSF6 SS SS0638 SF6: Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmSF6 SS SS0640 SF6: The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationSF6 SS SS0641 SF6: The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationSF6 SS SS0642 SF6: Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationSF6 SS SS0644 SF6: Mean value of nameplate capacity. This data element is required. meanValueMassSF6 SS SS0646 SF6:Describe the associated make, model, and group of conditions. This data element is required. descMakeModelSF6 SS SS0647 Sulfur hexafluoride: Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValueSF6 SS SS0648 Sulfur hexafluoride: Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesSF6 SS SS0649 Total facility GHG emissions according to Equation SS-1. This data element is required. pndsUserEmission SS SS0650 Total facility GHG emissions according to Equation SS-1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. pndsUserEmission SS SS0655 PFC-14 (Perfluoromethane): Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled. This data element is required. engineeringMethodPFC14 SS SS0657 PFC-14 (Perfluoromethane): The emission factor for the valve-hose combination Ci (units per A11 or A12). This data element is required. emissionFactorPFC14 SS SS0658 PFC-14 (Perfluoromethane): Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasurePFC14 SS SS0659 PFC-14 (Perfluoromethane): Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmPFC14 SS SS0660 PFC-14 (Perfluoromethane): The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationPFC14 SS SS0661 PFC-14 (Perfluoromethane): The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationPFC14 SS SS0662 PFC-116 (Perfluoroethane): Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled. This data element is required. engineeringMethodPFC116 SS SS0664 PFC-116 (Perfluoroethane): The emission factor for the valve-hose combination Ci (units per A18 or A19). This data element is required. emissionFactorPFC116 SS SS0665 PFC-116 (Perfluoroethane): Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasurePFC116 SS SS0666 PFC-116 (Perfluoroethane): Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmPFC116 SS SS0667 PFC-116 (Perfluoroethane): The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationPFC116 SS SS0668 PFC-116 (Perfluoroethane): The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationPFC116 SS SS0669 PFC-218 (Perfluoropropane): Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled. This data element is required. engineeringMethodPFC218 SS SS0671 PFC-218 (Perfluoropropane): The emission factor for the valve-hose combination Ci (units per A25 or A26). This data element is required. emissionFactorPFC218 SS SS0672 PFC-218 (Perfluoropropane): Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasurePFC218 SS SS0673 PFC-218 (Perfluoropropane): Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmPFC218 SS SS0674 PFC-218 (Perfluoropropane): The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationPFC218 SS SS0675 PFC-218 (Perfluoropropane): The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationPFC218 SS SS0676 Perfluorocyclopropane: Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled.. This data element is required. engineeringMethodCC3F6 SS SS0678 Perfluorocyclopropane: The emission factor for the valve-hose combination Ci (units per A32 or A33). This data element is required. emissionFactorCC3F6 SS SS0679 Perfluorocyclopropane: Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasureCC3F6 SS SS0680 Perfluorocyclopropane: Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmCC3F6 SS SS0681 Perfluorocyclopropane: The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationCC3F6 SS SS0682 Perfluorocyclopropane: The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationCC3F6 SS SS0683 PFC-3-1-10 (Perfluorobutane): Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled. This data element is required. engineeringMethodPFC3110 SS SS0685 PFC-3-1-10 (Perfluorobutane): The emission factor for the valve-hose combination Ci (units per A39 or A40). This data element is required. emissionFactorPFC3110 SS SS0686 PFC-3-1-10 (Perfluorobutane): Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasurePFC3110 SS SS0687 PFC-3-1-10 (Perfluorobutane): Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmPFC3110 SS SS0688 PFC-3-1-10 (Perfluorobutane): The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationPFC3110 SS SS0689 PFC-3-1-10 (Perfluorobutane): The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationPFC3110 SS SS0690 Perfluorocyclobutane : Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled.. This data element is required. engineeringMethodCC4F8 SS SS0692 Perfluorocyclobutane: The emission factor for the valve-hose combination Ci (units per A46 or A47). This data element is required. emissionFactorCC4F8 SS SS0693 Perfluorocyclobutane: Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasureCC4F8 SS SS0694 Perfluorocyclobutane: Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmCC4F8 SS SS0695 Perfluorocyclobutane: The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationCC4F8 SS SS0696 Perfluorocyclobutane: The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationCC4F8 SS SS0697 PFC-4-1-12 (Perfluoropentane): Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled. This data element is required. engineeringMethodPFC4112 SS SS0699 PFC-4-1-12 (Perfluoropentane): The emission factor for the valve-hose combination Ci (units per A53 or A54). This data element is required. emissionFactorPFC4112 SS SS0700 PFC-4-1-12 (Perfluoropentane): Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasurePFC4112 SS SS0701 PFC-4-1-12 (Perfluoropentane): Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmPFC4112 SS SS0702 PFC-4-1-12 (Perfluoropentane): The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationPFC4112 SS SS0703 PFC-4-1-12 (Perfluoropentane): The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationPFC4112 SS SS0704 PFC-5-1-14 (Perfluorohexane): Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled. This data element is required. engineeringMethodPFC5114 SS SS0706 PFC-5-1-14 (Perfluorohexane): The emission factor for the valve-hose combination Ci (units per A60 or A61). This data element is required. emissionFactorPFC5114 SS SS0707 PFC-5-1-14 (Perfluorohexane): Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasurePFC5114 SS SS0708 PFC-5-1-14 (Perfluorohexane): Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmPFC5114 SS SS0709 PFC-5-1-14 (Perfluorohexane): The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationPFC5114 SS SS0710 PFC-5-1-14 (Perfluorohexane): The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationPFC5114 SS SS0711 PFC-9-1-18: Describe the engineering methods and calculations used to determine emissions from hoses or other flow lines that connect the container to the equipment being filled. This data element is required. engineeringMethodPFC9118 SS SS0713 PFC-9-1-18: The emission factor for the valve-hose combination Ci (units per A67 or A68). This data element is required. emissionFactorPFC9118 SS SS0714 PFC-9-1-18: Report the units of measure for EFC for each hose and valve combination. This data element is required. unitOfMeasurePFC9118 SS SS0715 PFC-9-1-18: Report the valve fitting sizes and hose diameters for each hose and valve combination. This data element is required. valveFitSizeHoseDmPFC9118 SS SS0716 PFC-9-1-18: The total number of fill operations during the reporting year for the valve-hose combination Ci. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. totalNoOfFillOperationPFC9118 SS SS0717 PFC-9-1-18: The total number of fill operations during the reporting year for the valve-hose combination Ci. This data element is required. totalNoOfFillOperationPFC9118 SS SS0718 PFC-116 (Perfluoroethane): Report the method used to estimate the substitute data used for determining the value for EFC. This data element is required. methodUsedEfcValuePFC116 SS SS0719 PFC-218 (Perfluoropropane): Report the method used to estimate the substitute data for determining the value for EFC. This data element is required. methodUsedEfcValuePFC218 SS SS0720 Perfluorocyclopropane: Report the method used to estimate the substitute data for determining the value for EFC. This data element is required. methodUsedEfcValueCC3F6 SS SS0722 Perfluorocyclobutane: Report the method used to estimate the substitute data for determining the value for EFC. This data element is required. methodUsedEfcValueCC4F8 SS SS0723 PFC-4-1-12 (Perfluoropentane): Report the method used to estimate the substitute data for determining the value for EFC. This data element is required. methodUsedEfcValuePFC4112 SS SS0724 PFC-5-1-14 (Perfluorohexane): Report the method used to estimate the substitute data for determining the value for EFC. This data element is required. methodUsedEfcValuePFC5114 SS SS0725 PFC-9-1-18: Report the method used to estimate the substitute data for determining the value for EFC. This data element is required. methodUsedEfcValuePFC9118 SS SS0726 PFC-14 (Perfluoromethane): Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationPFC14 SS SS0727 PFC-116 (Perfluoroethane): Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationPFC116 SS SS0728 PFC-218 (Perfluoropropane): Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationPFC218 SS SS0729 Perfluorocyclopropane: Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationCC3F6 SS SS0731 Perfluorocyclobutane: Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationCC4F8 SS SS0732 PFC-4-1-12 (Perfluoropentane): Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationPFC4112 SS SS0733 PFC-5-1-14 (Perfluorohexane): Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationPFC5114 SS SS0734 PFC-9-1-18: Report the method used to estimate the substitute data for total number of filling operations. This data element is required. mehtodUsedTotalNumfillOperationPFC9118 SS SS0735 PFC-14 (Perfluoromethane): Mean value of nameplate capacity. This data element is required. meanValueMassPFC14 SS SS0737 PFC-14 (Perfluoromethane): Describe the associated make, model, and group of conditions. This data element is required. descMakeModelPFC14 SS SS0738 PFC-116 (Perfluoroethane): Mean value of nameplate capacity. This data element is required. meanValueMassPFC116 SS SS0740 PFC-116 (Perfluoroethane): Describe the associated make, model, and group of conditions. This data element is required. descMakeModelPFC116 SS SS0741 PFC-218 (Perfluoropropane): Mean value of nameplate capacity. This data element is required. meanValueMassPFC218 SS SS0742 PFC-218 (Perfluoropropane): Mean value of nameplate capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. meanValueMassPFC218 SS SS0743 PFC-218 (Perfluoropropane): Describe the associated make, model, and group of conditions. This data element is required. descMakeModelPFC218 SS SS0744 Perfluorocyclopropane: Mean value of nameplate capacity. This data element is required. meanValueMassCC3F6 SS SS0745 Perfluorocyclopropane: Mean value of nameplate capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. meanValueMassCC3F6 SS SS0746 Perfluorocyclopropane: Describe the associated make, model, and group of conditions. This data element is required. descMakeModelCC3F6 SS SS0747 PFC-3-1-10 (Perfluorobutane): Mean value of nameplate capacity. This data element is required. meanValueMassPFC3110 SS SS0748 PFC-3-1-10 (Perfluorobutane): Mean value of nameplate capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. meanValueMassPFC3110 SS SS0749 PFC-3-1-10 (Perfluorobutane): Describe the associated make, model, and group of conditions. This data element is required. descMakeModelPFC3110 SS SS0750 Perfluorocyclobutane: Mean value of nameplate capacity. This data element is required. meanValueMassCC4F8 SS SS0751 Perfluorocyclobutane: Mean value of nameplate capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. meanValueMassCC4F8 SS SS0752 Perfluorocyclobutane: Describe the associated make, model, and group of conditions. This data element is required. descMakeModelCC4F8 SS SS0753 PFC-4-1-12 (Perfluoropentane): Mean value of nameplate capacity. This data element is required. meanValueMassPFC4112 SS SS0754 PFC-4-1-12 (Perfluoropentane): Mean value of nameplate capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. meanValueMassPFC4112 SS SS0755 PFC-4-1-12 (Perfluoropentane): Describe the associated make, model, and group of conditions. This data element is required. descMakeModelPFC4112 SS SS0756 PFC-5-1-14 (Perfluorohexane): Mean value of nameplate capacity. This data element is required. meanValueMassPFC5114 SS SS0757 PFC-5-1-14 (Perfluorohexane): Mean value of nameplate capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. meanValueMassPFC5114 SS SS0758 PFC-5-1-14 (Perfluorohexane): Describe the associated make, model, and group of conditions. This data element is required. descMakeModelPFC5114 SS SS0759 PFC-9-1-18: Mean value of nameplate capacity. This data element is required. meanValueMassPFC9118 SS SS0760 PFC-9-1-18: Mean value of nameplate capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. meanValueMassPFC9118 SS SS0761 PFC-9-1-18: Describe the associated make, model, and group of conditions. This data element is required. descMakeModelPFC9118 SS SS0762 PFC-14 (Perfluoromethane): Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValuePFC14 SS SS0763 PFC-116 (Perfluoroethane): Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValuePFC116 SS SS0764 PFC-218 (Perfluoropropane): Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValuePFC218 SS SS0765 Perfluorocyclopropane: Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValueCC3F6 SS SS0767 Perfluorocyclobutane: Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValueCC4F8 SS SS0768 PFC-4-1-12 (Perfluoropentane): Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValuePFC4112 SS SS0769 PFC-5-1-14 (Perfluorohexane): Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValuePFC5114 SS SS0770 PFC-9-1-18: Report the method used to estimate the substitute data for mean value of nameplate capacity. This data element is required. methodUsedMeanValuePFC9118 SS SS0771 PFC-14 (Perfluoromethane): Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesPFC14 SS SS0772 PFC-116 (Perfluoroethane): Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesPFC116 SS SS0773 PFC-218 (Perfluoropropane): Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesPFC218 SS SS0774 Perfluorocyclopropane: Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesCC3F6 SS SS0775 PFC-3-1-10 (Perfluorobutane): Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesPFC3110 SS SS0776 Perfluorocyclobutane: Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesCC4F8 SS SS0777 PFC-4-1-12 (Perfluoropentane): Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesPFC4112 SS SS0778 PFC-5-1-14 (Perfluorohexane): Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesPFC5114 SS SS0779 PFC-9-1-18: Report the method used to estimate the substitute data for number of samples. This data element is required. methodUsedNumofSamplesPFC9118 SS SS0780 Sulfur hexafluoride: Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundSF6 SS SS0781 PFC-14 (Perfluoromethane): Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundPFC14 SS SS0782 PFC-116 (Perfluoroethane): Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundPFC116 SS SS0783 PFC-218 (Perfluoropropane): Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundPFC218 SS SS0784 Perfluorocyclopropane: Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundCC3F6 SS SS0785 PFC-3-1-10 (Perfluorobutane): Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundPFC3110 SS SS0786 Perfluorocyclobutane: Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundCC4F8 SS SS0787 PFC-4-1-12 (Perfluoropentane): Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedUpperBoundPFC4112 SS SS0788 PFC-5-1-14 (Perfluorohexane): Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundPFC5114 SS SS0789 PFC-9-1-18: Report the method used to estimate the substitute data for the upper bound. This data element is required. methodUsedUpperBoundPFC9118 SS SS0790 Sulfur hexafluoride: Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundSF6 SS SS0791 PFC-14 (Perfluoromethane): Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundPFC14 SS SS0792 PFC-116 (Perfluoroethane): Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundPFC116 SS SS0793 PFC-218 (Perfluoropropane): Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundPFC218 SS SS0794 Perfluorocyclopropane: Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundCC3F6 SS SS0795 PFC-3-1-10 (Perfluorobutane): Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundPFC3110 SS SS0796 PFC-4-1-12 (Perfluoropentane): Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundPFC4112 SS SS0797 PFC-5-1-14 (Perfluorohexane): Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundPFC5114 SS SS0798 PFC-9-1-18: Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundPFC9118 SS SS0799 Were missing data procedures used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations (MF in Equation SS-6)? This data element is required. missingDataFillEqptOffsite SS SS0800 If missing data procedures were used for the pounds of GHG used to fill equipment at off-site electric power transmission or distribution locations, you must report the data used. This data element is required. missingDataFillEqptOffsiteReason SS SS0801 Were missing data procedures used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility (MC in Equation SS-6)? This data element is required. missingDataChargeEqpt SS SS0802 If missing data procedures were used for the pounds of GHG used to charge the equipment prior to leaving the electrical equipment manufacturer or refurbishment facility, you must report the data used. This data element is required. missingDataChargeEqptReason SS SS0803 Were missing data procedures used for the nameplate capacity of the equipment installed at off-site electric power transmission or distribution locations used to determine emissions from installation (NI in Equation SS-6)? This data element is required. missingDataNameplateCap SS SS0804 PFC-14 (Perfluoromethane): Report the method used to estimate the substitute data used for determining the value for EFC. This data element is required. methodUsedEfcValuePFC14 SS SS0805 Perfluorocyclobutane: Report the method used to estimate the substitute data for the lower bound. This data element is required. methodUsedLowerBoundCC4F8 T GHG-ADD-2 The greenhouse gas you are attempting to add is invalid because it already exists on the selection list provided. Please enter a unique greenhouse gas, or click CANCEL. ghgExisting T T0001 You have not added a Production Process Type. This data element is required. Please enter the required data or click CANCEL. productProcessType T T0002 Production Process Type. You selected "Other Process" from the pick list provided, but failed to provide a description of the process in the text box provided. This data element is required. You must enter a description of the "other" production process before continuing. productProcessTypeOther T T0003 The quantity of magnesium produced or processed for this production process. This data element is required. magnesiumAmount T T0004 The quantity of magnesium produced or processed by this production process. You must enter a value that is greater than zero. magnesiumAmount T T0005 You have not added a production unit. You must enter a production unit for this production process. This data element is required. subPartTProcessUnitList T T0006 Flow Rate of Cover/Carrier Gas. This data element is required. flowRate T T0007 Flow Rate of Cover/Carrier Gas. You must enter a value that is greater than zero. flowRate T T0008 You have not added a cover or carrier gas to the Cover/Carrier Gas Composition Table. You must complete the Cover/Carrier Gas Composition Table before submitting your report. ghgMixture T T0009 Gas Type. This data element is required. Please enter the required data or click CANCEL. gasType T T001 You have not added a production process. You must add at least one production process and then report the required information for each process unit within the production process. subPartTProductionProcessesList T T0010 GHG Name. Please enter the required data or click CANCEL. coverGasName T T0011 GHG Name. Please enter the required data or click CANCEL. carrierGasName T T0012 Volume Percent. The volume percent is missing for this cover gas. The percentage composition data for each cover gas is a required data element. You must enter a volume percent for this cover gas before submitting your report. coverVolPercent T T0013 Volume Percent. This value should be reported as a percentage, and should be within the range of 0 to 100 %. The value you provided is outside that range. You must correct the current value before continuing. coverVolPercent T T0014 GHG Gas. This data element is required. Please enter the required data or click CANCEL. coverCarrierGas T T0015 F-GHG Name. Please enter the required data or click CANCEL. gasName T T0017 Annual Cover Gas Usage Rate. This data element is required. annualCoverGas T T0018 Annual Cover Gas Usage Rate. For cover gases you must enter a value that is greater than zero. For carrier gases you must enter zero. You must correct the current value before continuing. annualCoverGas T T0019 Total Annual Emissions resulting from use of GHG. This data element is required. totalAnnualEmission T T002 You have not added a GHG to the GHG Emissions Table. This data element is required. You must select a GHG in the GHG Emissions Table before continuing. subPartTCoverCarrierList T T0020 Total annual emissions resulting from use of this GHG. You must enter the annual emissions for this GHG in metric tons. This data element is required. totalAnnualEmission T T0021 Were missing data provisions used to estimate emissions for this GHG? This data element is required. wereMissingDataUsed T T0022 Missing Data Method used to estimate emissions. This data element is required. missingDataMethod T T0023 Time period (p) during which method was used. This data element is required. timePeriodUsed T T0024 Time period during which missing data procedures were used. This value should be reported as a number of days in the reporting year and should be within the range of 0 to 365 days (or 366 days for leap years). The value you provided is outside this range. Please correct the value before submitting your report. timePeriodUsed T T0025 Quantity of emissions estimated using missing data method procedures. This data element is required. quantityEmission T T0026 Quantity of emissions estimated using the missing data procedures. You must enter a value that is greater than zero. quantityEmission T T0028 Cover Gas Name. This data element is required. Please enter the required data or click CANCEL. coverName T T0029 Carrier Gas Name. This data element is required. Please enter the required data or click CANCEL. carrierName T T0030 Specify "Other Non-GHG Carrier Gas". You selected "Other Non-GHG Carrier Gas" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherNonghgCarrier T T0031 Volume Percent. The volume percent is missing for this carrier gas. You must enter the volume percent composition for each carrier gas you used during the reporting year. carrierVolPercent T T0032 Volume Percent. This value should be reported as a percentage, and should be within the range of 0 to 100 %. The value you provided is outside that range. You must correct the current value before continuing. carrierVolPercent T T0033 Method used to calculate emissions. This data element is required. Please select the calculation method used to calculate emissions of this GHG. calcMethodUsed T T0034 Units of time in either hours or days for the time period during which missing data provisions were used. This data element is required. timePeriodUsedScale T T0036 Time period during which the missing data procedures were used. This value should be reported as the total number of hours in the reporting year and must be between 0 and 8,760 hours (or 8,784 hours for leap years). The value you provided is outside this range. timePeriodUsed T T0046 Unit Type. You selected "Other Unit" from the pick list provided, but failed to provide a description of the unit in the text box provided. This data element is required. You must enter a description of the production unit before continuing. otherUnit T T0048 Chemical Abstract Registry Number. A match is found with the same cas number. The gas cannot be added. gasCasNum T T0050 CAS Number. Please enter the required data or click CANCEL. coverGasCasNum T T0052 CAS Number. Please enter the required data or click CANCEL. carrierGasCasNum T T0054 Specify "Other Non-GHG Cover Gas". You selected "Other Non-GHG Cover Gas" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. otherNonghgCover T T0056 You cannot add this greenhouse gas because the CAS Registry Number you have provided for this "other" gas matches with an existing 40 CFR Part 98 Table A-1 gas, or it matches with an "other" gas that has already been added. It is possible it is included in the selection list provided, but with a different chemical name than the one you are using. The gas with the matching CAS Registry Number is identified within e-GGRT as follows: CAS Registry Number: {1}; Gas Name: {2}; Chemical Formula: {3}. If you would like to select this gas, click CANCEL and locate the gas on the selection list provided. If you are unable to locate this gas on the selection list provided, please <a href=http://www.ccdsupport.com/confluence/display/help/Contact+the+Help+Desk+-+Issues+Related+to+the+Identification+of+Specific+f-GHGs target=_blank>contact the GHGRP Help Desk</a>. casNumber T T0060 Chemical Formula for other GHG cover or carrier gas. Please provide the chemical formula of the other GHG cover or carrier gas. gasFormula T T0061 Chemical Formula for other GHG cover gas. If known, please provide the chemical formula of the other GHG cover gas. coverGasFormula T T0062 Chemical Formula for other GHG carrier gas. If known, please provide the chemical formula of the other GHG carrier gas. carrierGasFormula T T0064 Your facility reported the GHG [{1}] in the emissions table (GHG COVER/CARRIER GASES table on the Subpart Overview screen). But your facility failed to report the GHG as a carrier and/or cover gas in the composition table of any production units. Please address this critical error. Then you can return here to perform another final review and submit your report. data['inCompositions'] T T0065 Your facility reported the GHG carrier gas [{1}] in the composition table of the production unit [{2}]. But your facility failed to report emissions of this GHG in the emissions table (GHG COVER/CARRIER GASES table on the Subpart Overview screen). Please address this critical error. Then you can return here to perform another final review and submit your report. data['inCarrierMix'] T T0066 Your facility reported the GHG cover gas [{1}] in the composition table of the production unit [{2}]. But your facility failed to report emissions of this GHG in the emissions table (GHG COVER/CARRIER GASES table on the Subpart Overview screen). Please address this critical error. Then you can return here to perform another final review and submit your report. data['inCoverMix'] T T100 The Production Process Type you have selected already exists. none T T101 The GHG you have selected already exists in the GHG Emissions Table. none T T102 The GHG Gas Name or CAS Number you have selected already exists. none T UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName T UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType TT ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] TT ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] TT HH0345 An indication that a gas collection system is at your facility has been made, but a unique name or identifier for the landfill gas measurement location has not been provided. This data element is required. Please provide a name, or click CANCEL. name TT HH0349 Annual operating hours for the landfill gas measurement location. The annual operating hours must be a number between zero and 8760 (or between zero and 8784 in a leap year). Please enter a valid number of operating hours, or click CANCEL. annualOperatingHours TT HH0350 An indication that a gas collection system is at your facility has been made, but the operating hours for the landfill gas measurement location has not been provided. This data element is required. annualOperatingHours TT HH0358 You have added a measurement location, but have not yet added a destruction device. If a destruction device is associated with this measurement location, but is located off-site, select the ADD a Destruction Device link and enter the total annual hours for the reporting year (8760 or 8784 if it is a leap year) and enter a value of 1 for destruction efficiency (DE). destructionDevices TT HH300 You have elected to enter your own result, but have not entered a value for the gas collection system collection efficiency (CE). You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEstimatedGasCollectionSysEfficiency TT HH301 Collection efficiency estimated at the landfill. Please enter the collection efficiency as a decimal fraction between zero and one. You must correct this before continuing. officialUnroundedEstimatedGasCollectionSysEfficiency TT HH307 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-6. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEqHH6Ch4 TT HH308 For Equation HH-6, was the value for CH4 generation modeled (using Equation HH-1) or measured (using Equation HH-4)? This data element is required. Please be sure that you have entered results for both Equation HH-1 and Equation HH-4. officialRoundedEqHH6Ch4 TT HH309 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-7. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedAnnualCh4GenerationEqHH7 TT HH310 Back-calculated methane generation (Equation HH-7). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAnnualCh4GenerationEqHH7 TT HH311 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-8. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEqHH8Ch4 TT HH312 Methane emissions (Equation HH-8). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedEqHH8Ch4 TT HH320 The value for Equation HH-8 (methane emissions) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. This data element is required. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneGenerationEquationHH8\CalculatedValue officialUnroundedEqHH8Ch4 For Landfills with gas collection systems include a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH8 TT HH321 The value for Equation HH-7 (back-calculated methane generation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. This data element is required. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneGenerationEquationHH7\CalculatedValue officialUnroundedAnnualCh4GenerationEqHH7 For Landfills with gas collection systems include a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH7 TT HH322 The value reported for Equation HH-6 (methane emissions) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedEqHH6Ch4 TT HH323 The value for Equation HH-6 (methane emissions) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\ GasCollectionSystemDetails\ MethaneGenerationEquationHH6\CalculatedValue officialUnroundedEqHH6Ch4 For Landfills with gas collection systems include a non-null numeric value for the data element with the specified xpath for MethaneGenerationEquationHH6 TT HH324 The estimated gas collection system efficiency has not been reported. Please go back and revise this value before submitting your report. This data is required. officialUnroundedEstimatedGasCollectionSysEfficiency TT HH330 The value for the oxidation factor (OX) used in Equation HH-6 has not been provided. This is a required data element. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\MethaneOxidationFractionHH6 oxHH6 For Landfills with gas collection systems include the this data element with value between 0 and 1 TT HH331 The value for the oxidation factor (OX) used in Equation HH-7 has not been provided. This is a required data element. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\MethaneOxidationFractionHH7 oxHH7 For Landfills with gas collection systems include the this data element with value between 0 and 1 TT HH332 The value for the oxidation factor (OX) used in Equation HH-8 has not been provided. This is a required data element. GHG\FacilitySiteInformation\FacilitySiteDetails\ SubPartInformation\SubPartHH\GasCollectionSystemDetails\ MethaneOxidation Fractions\ MethaneOxidationFractionHH8 oxHH8 For Landfills with gas collection systems include the this data element with value between 0 and 1 TT HH372 The number of annual operating hours for the measurement location cannot be lower than the number of annual operating hours for the destruction device. Please enter a valid number of operating hours, or click CANCEL. destructionDevices TT HH373 The number of annual operating hours for the destruction device cannot be higher than the number of annual operating hours for the measurement location. Please enter a valid number of operating hours, or click CANCEL. annualOperatingHours TT HH374 The number of annual operating hours ({1}) for the destruction device {2} cannot be higher than the number of annual operating hours ({3}) for the measurement location {4}. You must enter number of annual operating hours for either the destruction device or the measurement location. destructionDevices TT HH378 You reported 0 for the Annual operating hours for the landfill gas measurement location ({1}). However, for the same measurement location you have reported an Annual quantity of recovered CH4 ({2} (metric tons)) greater than 0, implying the measurement location was operational for a period of time during the reporting year. You must report Annual operating hours for the measurement location greater than zero, if Annual quantity of recovered CH4 is greater than zero. Please check the values you entered and correct before continuing. recoveredCh4Quantity TT TT0001 Landfill Details. You have selected Subpart TT for reporting, but you have not yet completed the landfill details page. rySpecificLandfillAndEmissionsMapDTO TT TT0002 Waste Stream Summary. You have selected Subpart TT for reporting, but you have not yet added a waste stream. streamName TT TT0004 Was the landfill open or closed. This data element is required. isOpen TT TT0005 Does the landfill have a landfill gas collection system? This data element is required. hasLFGCollectionSystem TT TT0007 Capacity of the gas collection system. This data element is required. gasCollectionSystem.systemCapacity TT TT0008 Capacity of the gas collection system. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. gasCollectionSystem.systemCapacity TT TT0009 Number of wells. This data element is required. gasCollectionSystem.numberOfwells TT TT0010 Landfill Gas Collection System. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. gasCollectionSystem.numberOfwells TT TT0013 The typical frequency of use of leachate recirculation over the past ten years. This data element is required. leachateCirculationFrequency TT TT0018 Aeration blower capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. blowerCapacity TT TT0025 If the landfill is open, the estimated year of landfill closure. This data element is required for open landfills. esimatedClosureYear TT TT0027 Landfill capacity. This data element is required. landfillCapacity TT TT0030 If the landfill is closed, the last year the landfill received waste. This data element is required. lastYearReceivedWaste TT TT0044 Total volumetric flow of landfill gas collected for destruction (scf). This data element is required. otherGasCollectionSystemDetails.annualVolume TT TT0048 Number of days substitute data were used to determine the volume. The value you provide must be greater than zero and less than or equal to 366. You must correct the current value before continuing. otherGasCollectionSystemDetails.numberOfDaysSubDataUsedAnnualVolume TT TT0049 Annual average CH4 concentration. This data element is required. otherGasCollectionSystemDetails.annualAverageCh4Concentration TT TT0053 If methane is monitored daily, the number of days substitute data was used to determine the annual average CH4 concentration of landfill gas collected for destruction. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. otherGasCollectionSystemDetails.numberOfDaysSubDataUsedAvgCh4Con TT TT0055 If methane is monitored weekly, the number of weeks substitute data was used to determine the annual average CH4 concentration of landfill gas collected for destruction. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 52 (weeks). The value you provided is outside that range. You must correct the current value before continuing. otherGasCollectionSystemDetails.numberOfWeeksSubDataUsedAvgCh4Con TT TT0056 Was temperature incorporated into internal calculations run by the collection system\'s monitoring equipment? This data element is required. otherGasCollectionSystemDetails.isTempIncorporated TT TT0057 Average monthly temperature at which flow is measured, for month(s) [{1}]. This data element is required. averageTemperature TT TT0081 Was pressure incorporated into internal calculations run by the collection system\'s monitoring equipment? This data element is required. otherGasCollectionSystemDetails.isPressureIncorporated TT TT0082 Average monthly pressure at which flow is measured, for month(s) [{1}]. This data element is required. averagePressure TT TT0106 Was landfill gas flow measured on a wet or dry basis? This data element is required. otherGasCollectionSystemDetails.isGasFlowWetBasis TT TT0107 Was CH4 concentration measured on a wet or dry basis? This data element is required. otherGasCollectionSystemDetails.isCh4ConcentrationWetBasis TT TT0108 Average monthly moisture content, for month(s) [{1}]. This data element is required. averageMoistureContent TT TT0132 Destruction occurred at the facility or offsite? This data element is required. otherGasCollectionSystemDetails.destructionOccurredAt TT TT0135 Depth of area with no waste in-place (meters). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithNoWasteA1 TT TT0136 The depth of area without active gas collection, regardless of cover type (A2 in Table HH-3) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithOutActiveGasCollectionA2 TT TT0138 The depth of area with daily soil cover and active gas collection (A3) has not been reported. This data element is required and must be reported even if the value is 0. Please double check and revise this value before submitting the report. wasteDepthWithDailySoilCoverAndActiveGasA3 TT TT0140 A4: Depth of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5. This data element is required. wasteDepthWithSoilCoverNotMeetingCriteriaA4 TT TT0141 A4: Depth of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithSoilCoverNotMeetingCriteriaA4 TT TT0142 A5: Depth of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection. This data element is required. wasteDepthWithSoilCover3FeetOrGeoCoverA5 TT TT0143 A5: Depth of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. wasteDepthWithSoilCover3FeetOrGeoCoverA5 TT TT0145 Name or Identifier. This data element is required. streamName TT TT0146 Waste Stream Description. This data element is required. streamDescription TT TT0147 Identify each type of waste present in the waste stream. This data element is required. isAnyWasteTypeSelected TT TT0155 60-day anaerobic test method used. Because you have indicated that in one or more years the DOCx value for the waste stream was based on a measured value using a 60-day anaerobic biodegradation test, this data element is required. testMethodUsed TT TT0156 Specify other method (60-day anaerobic test method used). Because you selected \'Other (specify)\' for the 60-day anaerobic test method used, this data element is required. otherTestMethodUsed TT TT0160 Information related to a waste stream that is disposed of at your facility has been provided, but the same waste stream name or identifier text already exists. Please enter a unique stream name. streamName TT TT0161 Cover material used. Please select at least one type of cover material used. organicCoverMaterialType TT TT0195 The surface area for A1 (area with no waste-in-place) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithNoWasteA1 TT TT0196 A1: Surface area of area with no waste in-place. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. surfaceAreaWithNoWasteA1 TT TT0197 The surface area for A2 (area without active gas collection, regardless of cover type) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithOutActiveGasCollectionA2 TT TT0198 A2: Surface area of area without active gas collection, regardless of cover type. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. surfaceAreaWithOutActiveGasCollectionA2 TT TT0199 The surface area for A3 (area with daily soil cover and active gas collection) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithDailySoilCoverAndActiveGasA3 TT TT0200 A3: Surface area of area with daily soil cover and active gas collection. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. surfaceAreaWithDailySoilCoverAndActiveGasA3 TT TT0201 The surface area of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5 (area type A4 in Table HH-3) has not been reported. This data element is required even if the value to report is 0 square meters. surfaceAreaWithSoilCoverNotMeetingCriteriaA4 TT TT0202 A4: Surface area of area with an intermediate soil cover, or a final soil cover not meeting the criteria for A5. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. surfaceAreaWithSoilCoverNotMeetingCriteriaA4 TT TT0203 The surface area of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection (area type A5 in Table HH-3) has not been reported. This data element is required even if the value to report is 0 square meters. Please double check and revise this value before submitting the report. surfaceAreaWithSoilCover3FeetOrGeoCoverA5 TT TT0204 A5: Surface area of area with a final soil cover of 3 feet or thicker of clay and/or geomembrane cover system and active gas collection. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. surfaceAreaWithSoilCover3FeetOrGeoCoverA5 TT TT0207 You have selected the \'organic cover\' cover material type, but have not provided surface area (square meters). This data element is required. organicCoverMaterialType.coverTypeSurfaceArea TT TT0208 You have selected the \'clay cover\' cover material type, but have not provided surface area (square meters). This data element is required. clayMaterialType.coverTypeSurfaceArea TT TT0209 You have selected the \'sand cover\' cover material type, but have not provided surface area (square meters). This data element is required. sandMaterialType.coverTypeSurfaceArea TT TT0210 You have selected the \'other soil mixture\' cover material type, but have not provided surface area (square meters). This data element is required. otherSoilMixtureMaterialType.coverTypeSurfaceArea TT TT0211 You have indicated the fraction of methane in landfill gas (F) is based on a measured value, not the default value of 0.5, but have not provided the measured value. This data element is required. fractionOfCh4Value TT TT0212 You have indicated the methane correction factor (MCF) is based on a measured value, not the default value of 1, but have not provided the measured value. This data element is required. mcfValue TT TT0215 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation TT-1. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedTotalAnnualModeledCh4Generation TT TT0217 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation TT-1. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedTotalAnnualModeledCh4Generation TT TT0219 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation TT-6. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedModeledCh4Generation TT TT0221 You have elected to enter your own result, but have not entered a value for the gas collection system collection efficiency (CE). You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEstimatedGasCollectionSysEfficiency TT TT0222 Collection efficiency estimated at the landfill. Please enter the collection efficiency as a decimal fraction between zero and one. You must correct this before continuing. officialUnroundedEstimatedGasCollectionSysEfficiency TT TT0226 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation TT-6. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedModeledCh4Generation TT TT0228 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-6. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEqHH6Ch4 TT TT0229 For HH-6 was the value for CH4 generation modeled or measured. This data element is required. officialRoundedEqHH6Ch4 TT TT0230 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-7. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedAnnualCh4GenerationEqHH7 TT TT0231 Back-calculated methane generation (Equation HH-7). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedAnnualCh4GenerationEqHH7 TT TT0232 You have elected to enter your own result, but have not entered a value for the annual modeled methane generation calculated using Equation HH-8. You must enter a value, or select the \'Use the calculated result\' option. officialUnroundedEqHH8Ch4 TT TT0233 Methane emissions (Equation HH-8). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedEqHH8Ch4 TT TT0234 First year the landfill accepted waste. This data element is required. acceptWasteStartYear TT TT0235 First year the landfill accepted waste. Please enter a value greater than zero. You must correct this before continuing. acceptWasteStartYear TT TT0240 Annual quantity of waste disposed in the year(s) [{1}]. This data element is required. wasteDisposalQuantity TT TT0242 Degradable organic carbon (DOC) value for the year(s) [{1}]. This data element is required. docValue TT TT0244 Decay rate (k) for the year(s) [{1}]. This data element is required. decayRate TT TT0246 Method used to determine historical waste stream quantity in the year(s) [{1}]. This data element is required. isMethod1Selected TT TT0247 Method used to determine DOC value for the year(s) [{1}]. This data element is required. isDefaultValueSelected TT TT0248 Annual average CH4 concentration. The value you provide must be greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. otherGasCollectionSystemDetails.annualAverageCh4Concentration TT TT0249 Range of years for which both disposal and production data were used in Equation TT-2 to calculate the average waste disposal factor for the landfill. Because you have indicated that you used Equation TT-2 (Method #2 on the Waste Stream Information page) to estimate historic waste quantities for the waste stream, this data element is required. rangeOfYearsDiposalAndProductionDataUsed TT TT0251 Capacity of the landfill used (or the total quantity of waste-in-place) at the end of the \'YrData\' from design drawings or engineering estimates. The value must be greater than or equal to zero. You must correct the current value before continuing. landfillCapacityUsedYrData TT TT0252 Capacity of the landfill used (or the total quantity of waste-in-place) at the end of the \'YrData\' from design drawings or engineering estimates. Because you have indicated that you used Equation TT-4a (Method #3 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. landfillCapacityUsedYrData TT TT0254 Are waste quantity data available? Because you have indicated that you used Equation TT-4a (Method #3 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. isWasteQtyDataAvailable TT TT0256 The year prior to the year when waste disposal data are first available (YrData). The value must be greater than or equal to zero. You must correct the current value before continuing. wasteDisposalDataAvailableYr TT TT0257 The year prior to the year when waste disposal data are first available (YrData). Because you have indicated that you used Equation TT-4a (Method #3 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams and because you have indicated that waste quantity data are available for some years, this data element is required. wasteDisposalDataAvailableYr TT TT0259 The year in which the landfill last received waste (YrData). The value must be greater than or equal to zero. You must correct the current value before continuing. lastReceivedWasteDisposalYr TT TT0260 The year in which the landfill last received waste (YrData). Because you have indicated that you used Equation TT-4a (Method #3 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. lastReceivedWasteDisposalYr TT TT0262 Do you know the year when the landfill opened? Because you have indicated that you used Equation TT-4a (Method #3 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. isLandFillOpenedYr TT TT0264 The year that the landfill first received waste from company records or 1960 (whichever is more recent). The value must be greater than or equal to zero. You must correct the current value before continuing. landFillReceivedWasteYear TT TT0265 The year that the landfill first received waste from company records or 1960 (whichever is more recent). Because you have indicated that you used Equation TT-4a (Method #3 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams and because you have indicated that you know the year when the landfill opened, this data element is required. landFillReceivedWasteYear TT TT0267 Total hours during the reporting year aeration blower was operated. You must enter a value that is greater than or equal to zero and less than or equal to 8784. You must correct the current value before continuing. totlaBlowerOperatedHours TT TT0268 Fraction of the landfill containing waste affected by the aeration system (percentage expressed as a decimal fraction). You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing fractionOfLandFillAffected TT TT0270 The value for Equation HH-8 (methane emissions) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. This data element is required. officialUnroundedEqHH8Ch4 TT TT0271 The value for Equation HH-7 (back-calculated methane generation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. This data element is required. officialUnroundedAnnualCh4GenerationEqHH7 TT TT0272 The value reported for Equation HH-6 (methane emissions) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedEqHH6Ch4 TT TT0273 The value for Equation HH-6 (methane emissions) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedEqHH6Ch4 TT TT0274 The estimated gas collection system efficiency has not been reported. Please go back and revise this value before submitting your report. This data is required. officialUnroundedEstimatedGasCollectionSysEfficiency TT TT0276 The value for the oxidation factor (OX) used in Equation TT-6 has not been provided. This is a required data element. oxTT6 TT TT0277 The value for the oxidation factor (OX) used in Equation HH-6 has not been provided. This is a required data element. oxHH6 TT TT0278 The value for the oxidation factor (OX) used in Equation HH-7 has not been provided. This is a required data element. oxHH7 TT TT0279 The value for the oxidation factor (OX) used in Equation HH-8 has not been provided. This is a required data element. oxHH8 TT TT0280-1 The value reported for Equation TT-6 (methane generation, adjusted for oxidation) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation TT TT0280-2 The value reported for Equation TT-6 (methane generation, adjusted for oxidation) from the landfill in the reporting year is outside the range expected by EPA. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation TT TT0281-1 The value for Equation TT-6 (methane generation, adjusted for oxidation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation TT TT0281-2 The value for Equation TT-6 (methane generation, adjusted for oxidation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation TT TT0281-3 The value for Equation TT-6 (methane generation, adjusted for oxidation) from the landfill in the reporting year has not been reported. You must enter a value that is greater than zero. You must correct the current value before continuing. officialUnroundedModeledCh4Generation TT TT0282 If methane is monitored monthly, the number of months substitute data was used to determine the annual average CH4 concentration of landfill gas collected for destruction. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. otherGasCollectionSystemDetails.numberOfMonthsSubDataUsedAvgCh4Con TT TT0283-1 The value for the modeled methane generation calculated using Equation TT-1. You must enter a value that is greater than zero. You must correct this before continuing. officialUnroundedTotalAnnualModeledCh4Generation TT TT0283-2 The value for the modeled methane generation calculated using Equation TT-1. You must enter a value that is greater than zero. You must correct this before continuing. officialUnroundedTotalAnnualModeledCh4Generation TT TT0284-1 The value for Equation TT-1 (modeled methane generation) from the landfill in the reporting year has not been reported. This data element is required. officialUnroundedTotalAnnualModeledCh4Generation TT TT0284-2 The value for Equation TT-1 (modeled methane generation) from the landfill in the reporting year has not been reported. This data element is required. officialUnroundedTotalAnnualModeledCh4Generation TT TT0285 Quantity of waste-in-place at the start of the reporting year from design drawings or engineering estimates. The value must be greater than or equal to zero. You must correct the current value before continuing. wasteInPlaceQuantity TT TT0286 Quantity of waste-in-place at the start of the reporting year from design drawings or engineering estimates. Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. wasteInPlaceQuantity TT TT0288 Are waste-in-place quantity data known? Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. wasteInPlaceQuantityKnown TT TT0290 Quantity of waste-in-place at the start of the reporting year. Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. wasteInPlaceQuantityClosed TT TT0292 Landfill design capacity. Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. landfillDesignCapacity TT TT0294 Cumulative quantity of waste placed in the landfill for the years for which disposal quantities are available from company records or from Equation TT-3 of this subpart. Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. cumulativeWasteQuantity TT TT0296 The year prior to the year when waste disposal data are first available (YrData). The value must be greater than or equal to zero. You must correct the current value before continuing. landfillReceivedWasteYrLast TT TT0297 The year prior to the year when waste disposal data are first available (YrData). Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. landfillReceivedWasteYrLast TT TT0299 Do you know the year when the landfill opened? Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. landfillOpenKnown TT TT0301 The year that the landfill first received waste from company records or 1960 (whichever is more recent). Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams and because you have indicated that you know the year when the landfill opened, this data element is required. landfillYrOpen TT TT0302 The year that the landfill first received waste from company records or 1960 (whichever is more recent). This data element should not be reported since you have not indicated that Equation TT-4a (Method #3 on the Waste Stream Information page) was used to calculate waste disposal quantities for the waste stream(s) disposed in your landfill. landfillYrOpen TT TT0304 The number of years, from YrOpen to YrLast in Equation TT-4b, for which annual waste disposal quantities are available from company records or the number of years used to calculate Equation TT-3. The value must be greater than or equal to zero. You must correct the current value before continuing. yearsQuantityAvailable TT TT0305 The number of years, from YrOpen to YrLast in Equation TT-4b, for which annual waste disposal quantities are available from company records or the number of years used to calculate Equation TT-3. Because you have indicated that you used Equation TT-4b (Method #4 on the Waste Stream Information page) to estimate historic waste quantities for one or more waste streams, this data element is required. yearsQuantityAvailable TT TT0307 Quantity of waste-in-place at the start of the reporting year. The value must be greater than or equal to zero. You must correct the current value before continuing. wasteInPlaceQuantityClosed TT TT0308 Landfill design capacity. The value must be greater than or equal to zero. You must correct the current value before continuing. landfillDesignCapacity TT TT0309 Cumulative quantity of waste placed in the landfill for the years for which disposal quantities are available from company records or from Equation TT-3 of this subpart. The value must be greater than or equal to zero. You must correct the current value before continuing. cumulativeWasteQuantity TT TT0337 Total methane emissions for Subpart TT. The total methane emissions for Subpart TT is less than or equal to zero, but is expected to be greater than zero. Please address this critical error. Then you can return here to perform another final review and submit your report. data['totalMethaneEmission'] U U000-2 You have added Subpart U, but have not yet selected a calculation method used to determine annual CO2 emissions from miscellaneous uses of carbonates. The calculation method data element is required. calcMethod U U000-3 You have added Subpart U, but have not yet selected a calculation method used to determine annual CO2 emissions from miscellaneous uses of carbonates. The calculation method data element is required. calcMethod U U001-2 You have added Subpart U, but have not yet selected at least one carbonate type. carbonateMap U U002 You have added Subpart U, but have not yet selected a calculation method used to determine annual CO2 emissions from miscellaneous uses of carbonates. The calculation method data element is required. calcMethod U U103 Enter Own result for Annual CO2 mass emissions from consumption of carbonates. This data element is required if you select Enter/Report Alternate Result. officialUnroundedCo2 U U200 Carbonate type. This data element is required. Please enter the required data or click CANCEL. carbonateType U U201 Calcination fraction measurement method. This data element is required. calcinationFractionMethod U U202 "Other" Calcination fraction measurement method. The Method Description data element is required. calcinationFractionMethodDescr U U203-1 Mass of Carbonate measurement method. This data element is required. massCarbonateMethod U U203-2 Mass of Carbonate measurement method. This data element is required. massCarbonateMethod U U204-1 "Other" Mass of Carbonate measurement method. The Method Description data element is required. massCarbonateMethodDescr U U204-2 "Other" Mass of Carbonate measurement method. The Method Description data element is required. massCarbonateMethodDescr U U205 Number of months missing data procedures used to determine the monthly mass of the carbonate. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. numbMonthsMissingData U U206 Number of months missing data procedures used to determine the monthly mass of the carbonate. This data element is required. numbMonthsMissingData U U208 Number of months missing data procedures used to determine mass of the carbonate input. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. numbMonthsMissingDataInput U U209 Number of months missing data procedures used to determine mass of the carbonate input. This data element is required. numbMonthsMissingDataInput U U211 Number of months missing data procedures used to determine mass of the carbonate output. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. numbMonthsMissingDataOutput U U212 Number of months missing data procedures used to determine mass of the carbonate output. This data element is required. numbMonthsMissingDataOutput U U214 A carbonate of the selected type already exists for this facility. carbonateType U U215 A CO2 emissions value of 0 metric tons was reported for Subpart U. Please address this critical error. Then you can return here to perform another final review and submit your report. data[subpartUAnnualCo2] UU ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] UU ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] UU UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName UU UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType UU UU0006 Sources of CO2 Received. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName co2Sources UU UU0008 Measurement Type. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName measurementType UU UU001 You have selected Subpart UU for reporting, but you have not yet added a flow meter or container. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName units UU UU0010 Total net mass of CO2 received annually. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName systemCalculatedUnroundedCo2 UU UU0014 Volumetric flow through the receiving flow meter in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Quantity UU UU0015 Volumetric flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Quantity UU UU0017 Standard or method used to calculate the volumetric flow through the receiving flow meter in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMethod UU UU0018 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMethodOther UU UU0019 Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMissingProcedures UU UU0022 Volumetric flow through the receiving flow meter in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Quantity UU UU0023 Volumetric flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Quantity UU UU0025 Standard or method used to calculate the volumetric flow through the receiving flow meter in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMethod UU UU0026 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMethodOther UU UU0027 Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMissingProcedures UU UU0030 Volumetric flow through the receiving flow meter in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Quantity UU UU0031 Volumetric flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Quantity UU UU0033 Standard or method used to calculate the volumetric flow through the receiving flow meter in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMethod UU UU0034 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMethodOther UU UU0035 Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMissingProcedures UU UU0038 Volumetric flow through the receiving flow meter in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Quantity UU UU0039 Volumetric flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Quantity UU UU0041 Standard or method used to calculate the volumetric flow through the receiving flow meter in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMethod UU UU0042 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMethodOther UU UU0043 Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMissingProcedures UU UU0045 Mass flow through the receiving flow meter in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Quantity UU UU0046 Mass flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Quantity UU UU0048 Standard or method used to calculate the mass flow through the receiving flow meter in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMethod UU UU0049 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMethodOther UU UU0050 Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMissingProcedures UU UU0052 Mass flow through the receiving flow meter in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Quantity UU UU0053 Mass flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Quantity UU UU0055 Standard or method used to calculate the mass flow through the receiving flow meter in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMethod UU UU0056 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMethodOther UU UU0057 Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMissingProcedures UU UU0059 Mass flow through the receiving flow meter in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Quantity UU UU0060 Mass flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Quantity UU UU0062 Standard or method used to calculate the mass flow through the receiving flow meter in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMethod UU UU0063 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMethodOther UU UU0064 Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMissingProcedures UU UU0066 Mass flow through the receiving flow meter in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Quantity UU UU0067 Mass flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Quantity UU UU0069 Standard or method used to calculate the mass flow through the receiving flow meter in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMethod UU UU0070 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMethodOther UU UU0071 Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMissingProcedures UU UU0073 Volume of contents in containers flow through the receiving flow meter in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Quantity UU UU0074 Volume of contents in containers flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Quantity UU UU0076 Standard or method used to calculate the volume of contents in the container in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMethod UU UU0077 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMethodOther UU UU0078 Were substitute data procedures used in Q1 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMissingProceduresUsed UU UU0079 Volume of contents in containers flow through the receiving flow meter in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Quantity UU UU0080 Volume of contents in containers flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Quantity UU UU0082 Standard or method used to calculate the volume of contents in the container in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMethod UU UU0083 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMethodOther UU UU0084 Were substitute data procedures used in Q2 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMissingProceduresUsed UU UU0085 Volume of contents in containers flow through the receiving flow meter in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Quantity UU UU0086 Volume of contents in containers flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Quantity UU UU0088 Standard or method used to calculate the volume of contents in the container in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMethod UU UU0089 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMethodOther UU UU0090 Were substitute data procedures used in Q3 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMissingProceduresUsed UU UU0091 Volume of contents in containers flow through the receiving flow meter in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Quantity UU UU0092 Volume of contents in containers flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Quantity UU UU0094 Standard or method used to calculate the volume of contents in the container in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMethod UU UU0095 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMethodOther UU UU0096 Were substitute data procedures used in Q4 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMissingProceduresUsed UU UU0097 Mass of contents in the container in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Quantity UU UU0098 Mass of contents in the container in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Quantity UU UU0100 Standard or method used to calculate the mass of contents in the container in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMethod UU UU0101 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMethodOther UU UU0102 Were substitute data procedures used in Q1 to calculate the mass of contents in the container. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityMissingProceduresUsed UU UU0103 Mass of contents in the container in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Quantity UU UU0104 Mass of contents in the container in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Quantity UU UU0106 Standard or method used to calculate the mass of contents in the container in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMethod UU UU0107 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMethodOther UU UU0108 Were substitute data procedures used in Q2 to calculate the mass of contents in the container. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityMissingProceduresUsed UU UU0109 Mass of contents in the container in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Quantity UU UU0110 Mass of contents in the container in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Quantity UU UU0112 Standard or method used to calculate the mass of contents in the container in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMethod UU UU0113 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMethodOther UU UU0114 Were substitute data procedures used in Q3 to calculate the mass of contents in the container. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityMissingProceduresUsed UU UU0115 Mass of contents in the container in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Quantity UU UU0116 Mass of contents in the container in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Quantity UU UU0118 Standard or method used to calculate the mass of contents in the container in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMethod UU UU0119 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMethodOther UU UU0120 Were substitute data procedures used in Q4 to calculate the mass of contents in the container. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityMissingProceduresUsed UU UU0121 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1 . This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedelivered UU UU0122 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedelivered UU UU0124 Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1 . This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMethod UU UU0125 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMethodOther UU UU0126 Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMissingProcedures UU UU0128 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2 . This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedelivered UU UU0129 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedelivered UU UU0131 Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2 . This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMethod UU UU0132 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMethodOther UU UU0133 Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMissingProcedures UU UU0135 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3 . This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedelivered UU UU0136 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedelivered UU UU0138 Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMethod UU UU0139 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMethodOther UU UU0140 Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMissingProcedures UU UU0142 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedelivered UU UU0143 Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedelivered UU UU0145 Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMethod UU UU0146 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMethodOther UU UU0147 Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMissingProcedures UU UU0149 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedelivered UU UU0150 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedelivered UU UU0152 Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMethod UU UU0153 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMethodOther UU UU0154 Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMissingProcedures UU UU0156 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedelivered UU UU0157 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedelivered UU UU0159 Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMethod UU UU0160 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMethodOther UU UU0161 Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMissingProcedures UU UU0163 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedelivered UU UU0164 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedelivered UU UU0166 Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMethod UU UU0167 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMethodOther UU UU0168 Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMissingProcedures UU UU0170 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedelivered UU UU0171 Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedelivered UU UU0173 Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMethod UU UU0174 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMethodOther UU UU0175 Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMissingProcedures UU UU0177 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedelivered UU UU0178 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedelivered UU UU0180 Were substitute data procedures used in Q1 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMissingProceduresUsed UU UU0181 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedelivered UU UU0182 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedelivered UU UU0184 Were substitute data procedures used in Q2 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMissingProceduresUsed UU UU0185 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedelivered UU UU0186 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedelivered UU UU0188 Were substitute data procedures used in Q3 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMissingProceduresUsed UU UU0189 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedelivered UU UU0190 Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedelivered UU UU0192 Were substitute data procedures used in Q4 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMissingProceduresUsed UU UU0193 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedelivered UU UU0194 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedelivered UU UU0196 Were substitute data procedures used in Q1 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMissingProceduresUsed UU UU0197 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedelivered UU UU0198 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedelivered UU UU0200 Were substitute data procedures used in Q2 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMissingProceduresUsed UU UU0201 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedelivered UU UU0202 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedelivered UU UU0204 Were substitute data procedures used in Q3 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMissingProceduresUsed UU UU0205 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedelivered UU UU0206 Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedelivered UU UU0208 Were substitute data procedures used in Q4 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMissingProceduresUsed UU UU0209 CO2 concentration in the flow in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2Concentration UU UU0210 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2Concentration UU UU0212 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMethod UU UU0213 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMethodOther UU UU0214 Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMissingProceduresUsed UU UU0215 CO2 concentration in the flow in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2Concentration UU UU0216 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2Concentration UU UU0218 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMethod UU UU0219 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMethodOther UU UU0220 Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMissingProceduresUsed UU UU0221 CO2 concentration in the flow in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2Concentration UU UU0222 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2Concentration UU UU0224 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMethod UU UU0225 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMethodOther UU UU0226 Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMissingProceduresUsed UU UU0227 CO2 concentration in the flow in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2Concentration UU UU0228 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2Concentration UU UU0230 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMethod UU UU0231 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMethodOther UU UU0232 Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMissingProceduresUsed UU UU0233 CO2 concentration in the flow in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2Concentration UU UU0234 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2Concentration UU UU0236 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMethod UU UU0237 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMethodOther UU UU0238 Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMissingProceduresUsed UU UU0239 CO2 concentration in the flow in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2Concentration UU UU0240 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2Concentration UU UU0242 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMethod UU UU0243 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMethodOther UU UU0244 Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMissingProceduresUsed UU UU0245 CO2 concentration in the flow in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2Concentration UU UU0246 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2Concentration UU UU0248 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMethod UU UU0249 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMethodOther UU UU0250 Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMissingProceduresUsed UU UU0251 CO2 concentration in the flow in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2Concentration UU UU0252 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2Concentration UU UU0254 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMethod UU UU0255 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMethodOther UU UU0256 Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMissingProceduresUsed UU UU0257 CO2 concentration in the flow in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2Concentration UU UU0258 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2Concentration UU UU0260 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMethod UU UU0261 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMethodOther UU UU0262 Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMissingProceduresUsed UU UU0263 CO2 concentration in the flow in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2Concentration UU UU0264 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2Concentration UU UU0266 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMethod UU UU0267 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMethodOther UU UU0268 Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMissingProceduresUsed UU UU0269 CO2 concentration in the flow in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2Concentration UU UU0270 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2Concentration UU UU0272 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMethod UU UU0273 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMethodOther UU UU0274 Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMissingProceduresUsed UU UU0275 CO2 concentration in the flow in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2Concentration UU UU0276 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2Concentration UU UU0278 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMethod UU UU0279 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMethodOther UU UU0280 Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMissingProceduresUsed UU UU0281 CO2 concentration in the flow in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2Concentration UU UU0282 CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2Concentration UU UU0284 Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMethod UU UU0285 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMethodOther UU UU0286 Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1Co2ConcentrationMissingProceduresUsed UU UU0287 CO2 concentration in the flow in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2Concentration UU UU0288 CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2Concentration UU UU0290 Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMethod UU UU0291 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMethodOther UU UU0292 Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2Co2ConcentrationMissingProceduresUsed UU UU0293 CO2 concentration in the flow in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2Concentration UU UU0294 CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2Concentration UU UU0296 Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMethod UU UU0297 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMethodOther UU UU0298 Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3Co2ConcentrationMissingProceduresUsed UU UU0299 CO2 concentration in the flow in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2Concentration UU UU0300 CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2Concentration UU UU0302 Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMethod UU UU0303 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMethodOther UU UU0304 Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4Co2ConcentrationMissingProceduresUsed UU UU0305 Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMethod UU UU0306 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMethodOther UU UU0307 Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMethod UU UU0308 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMethodOther UU UU0309 Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMethod UU UU0310 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMethodOther UU UU0311 Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q4 . This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMethod UU UU0312 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMethodOther UU UU0313 Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMethod UU UU0314 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q1QuantityRedeliveredMethodOther UU UU0315 Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMethod UU UU0316 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q2QuantityRedeliveredMethodOther UU UU0317 Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMethod UU UU0318 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q3QuantityRedeliveredMethodOther UU UU0319 Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMethod UU UU0320 Other Standard or Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName q4QuantityRedeliveredMethodOther UU UU0400 Total net mass of CO2 received annually. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName officialUnroundedCo2 UU UU0420 You have not identified the purpose of CO2 Injection. This is a required data element (40 CFR 98.476(e)). You must choose one purpose from the following options: (1) Geologic Sequestration Research & Development Exemption from reporting under Subpart RR; (2) to enhance the recovery of oil; (3) to enhance the recovery of natural gas; (4) for acid gas disposal; or (5) for another purpose (if choosing other, report the purpose). GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName purposeOfInjection UU UU0421 You have selected "The facility includes a well or group of wells where a CO2 stream was injected for a purpose other than those listed" as the purpose of CO2 injection, however you have not specified the purpose. This is a required data element (40 CFR 98.476(e)). GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName purposeOfInjectionOther V ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] V ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] V IVT-V064 You reported a Nitric Acid "{1}" and N2O Abatement Technology "{2}" or ID combination "{3}" under Equation V-3c Inputs that does not exist under Equation V-2 Inputs. Please review and correct. nitricAcidTrainId V V0010 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName ghgrpID V V0011 Reporting Period. This data element is required and must be equal to the expected reporting year. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName reportingPeriod V V0012 Total Number of Nitric Acid Trains at the Facility. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName totalNumberOfNitricAcidTrains V V0014 Total Annual Nitric Acid Production for the Facility. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName totalAnnualNitricAcidProduction V V0016 Nitric Acid Train ID. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName nitricAcidTrainId V V0017 Number of Months that a Missing Data Procedure Was Used to Determine a Monthly Quantity of Nitric Acid Production. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName missingDataProcedureUsedMonths V V0019 Type of Nitric Acid Process Used by the Train. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName nitricAcidProcessType V V0020 Are N2O Emissions Estimated Using an Administrator-Approved Alternative Method? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName isAdminApprovedAlternateMethodUsed V V0021 Enter the name of the Alternative Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName alternateMethodName V V0022 A description of the Alternative Method. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName alternateMethodDescription V V0023 The request date. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName alternateMethodRequestDate V V0025 The approval date. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName alternateMethodApprovalDate V V0027 Number of Times in the Reporting Year that a Performance Test had to be Repeated. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName numberOfPerfomanceTestsRepeated V V0029 Performance Test (1 of 3): ID/Description. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName performanceTestId1 V V0030 Performance Test (1 of 3): Test Method Used. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName performanceTestMethod1 V V0031 Is Nitrous Oxide from the Nitric Acid Train Reduced Through the Use of an N2O Abatement Technology? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName doesNitricAcidTrainExhaust V V0032 Was Nonselective catalytic reduction (NSCR) used as an abatement technology? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName isNSCRUsed V V0033 Were any "other" abatement technologies used? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName otherAbatementTechnologiesUsed V V0034 A description of the "Other" Abatement Technology. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName otherAbatementTechnologyDescription V V0037 Multiple rows were found for Nitric Acid Train "{1}" in the reporting form. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName nitricAcidTrainId V V0040 Is this a previously approved alternative method? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName isAlternateMethodPreviouslyApproved V V0041 Date of Installation of Abatement Technology. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName otherAbatementTechnologyInstallationDate V V0042 Date of Installation of Abatement Technology. The date cannot be after 12/31/{1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName otherAbatementTechnologyInstallationDate V V005 You have not uploaded a reporting form file. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName jctSubPartFacility VV VV001 Invalid Begin reporting year. Please enter a four digit number ryBegin VV VV002 Invalid End reporting year. Please enter a four digit number ryEnd VV VV003 Invalid Begin reporting year. Please enter a four digit number ryBegin VV VV004 Invalid End reporting year. Please enter a four digit number ryEnd W ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] W ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] W W0005V3 Quantity of natural gas received at gas processing plant [98.236(aa)(3)(i)]. This element is required for this industry segment. Please address this critical error. Then you can return here to perform another final review and submit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/AnnualLiquidThroughput data['quantityOfGasReceived'] W W0006V3 Quantity of natural gas received at gas processing plant [98.236(aa)(3)(i)]. You must enter a value that is greater than or equal to zero. Please address this critical error. Then you can return here to perform another final review and submit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/AnnualLiquidThroughput data['quantityOfGasReceived'] W W0007V3 Does facility fractionate NGLs? [98.236(aa)(3)(vii)]. This element is required for this industry segment. Please address this critical error. Then you can return here to perform another final review and submit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/AnnualLiquidThroughput data['fractionateNGL'] W W0008V3 Quantity of natural gas added to in-system storage [98.236(aa)(9)(iii)]. This element is required for this industry segment. Please address this critical error. Then you can return here to perform another final review and submit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/AnnualLiquidThroughput data['quantityGasAdded'] W W0009V3 Quantity of natural gas added to in-system storage [98.236(aa)(9)(iii)]. You must enter a value that is greater than or equal to zero. Please address this critical error. Then you can return here to perform another final review and submit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/AnnualLiquidThroughput data['quantityGasAdded'] W W0010V3 Quantity of natural gas transferred to third parties [98.236(aa)(9)(v)]. This element is required for this industry segment. Please address this critical error. Then you can return here to perform another final review and submit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/AnnualLiquidThroughput data['quantityGasTransferred'] W W0011V3 Quantity of natural gas transferred to third parties [98.236(aa)(9)(v)]. You must enter a value that is greater than or equal to zero. Please address this critical error. Then you can return here to perform another final review and submit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/AnnualLiquidThroughput data['quantityGasTransferred'] W W0031V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/DoesFacilityHavePneumaticPumps data[selectedIndustrySegmentNumber] W W0032V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/DoesFacilityHavePneumaticPumps data[selectedIndustrySegmentNumber] W W0033V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits data[selectedIndustrySegmentNumber] W W0034V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits data[selectedIndustrySegmentNumber] W W0035V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits data[selectedIndustrySegmentNumber] W W0036V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits data[selectedIndustrySegmentNumber] W W0037V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits data[selectedIndustrySegmentNumber] W W0038V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits data[selectedIndustrySegmentNumber] W W0039V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits data[selectedIndustrySegmentNumber] W W0040V3 In your XML report, you indicated "No" for the data element "RequiredForIndustrySegment" for the [{1}] emission source type(s) in the "SubpartWSummaryDetails" node even though the [{2}] emission source type(s) is required for the [{3}] industry segment. Please revise your report to have this indicator as "Yes" as well as a completed [{4}] node(s) and resubmit your report. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits data[selectedIndustrySegmentNumber] W W1000V3 The DehydratorsDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails dehydratorsData W W1001V3 The WellsWithFracturing node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellsWithFracturingDetails wellsWithFracturingData W W1002V3 The AssociatedGasVentingFlaringDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails gasVentingFlaringData W W1003V3 The FlareStacksDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails flareStacksData W W1004V3 The TransmissionTanksDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails transmissionTanksData W W1005V3 The WellsWithoutFracturing node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellsWithoutFracturingDetails wellsWithoutFracturingData W W1006V3 The PneumaticDeviceVentingData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails pneumaticDeviceVentingData W W1007V3 The PneumaticPumpsData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails pneumaticPumpsData W W1008V3 The WellTestingData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails wellTestingData W W1009V3 The CentrifugalCompressorsData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails centrifugalCompressorsData W W1010V3 The ReciprocatingCompressorsData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails reciprocatingCompressorsData W W1011V3 The EquipmentLeaksData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails equipmentLeaksData W W1012V3 The OffshoreEmissionsData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OffshoreEmissionsDetails offshoreEmissionsData W W1013V3 The CombustionEmissionsData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails combustionEmissionsData W W1014V3 Facility Name. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/FacilitySite/FacilitySiteName facilityName W W1015V3 The FacilityOverviewData node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails facilityOverviewData W W1580V3 Select the applicable industry segment. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OffshoreEmissionsDetails selectedIndustrySegmentNumber W W1581V3 Reporting Period. This data element is required and must be equal to the expected reporting year. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/ReportingPeriod reportingPeriod W W1582V3 GHGRP ID. This data element is required and must be equal to the GHGRP ID for the facility. GHG/FacilitySiteInformation/FacilitySiteDetails/FacilitySite/FacilitySiteIdentifier ghgrpID W W1583V3 Does the Facility have any continuous high bleed pneumatic devices subject to reporting under 98.232? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/DoesFacilityHaveHighBleedDevices doesFacilityHaveHighBleedDevices W W1584V3 Does the Facility have any intermittent bleed pneumatic devices subject to reporting under 98.232? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/DoesFacilityHaveIntermittentBleedDevices doesFacilityHaveIntermittentBleedDevices W W1585V3 Does the Facility have any continuous low bleed pneumatic devices subject to reporting under 98.232? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/DoesFacilityHaveLowBleedDevices doesFacilityHaveLowBleedDevices W W1586V3 Actual Count. This data element is required for Onshore petroleum and natural gas production facilities and Onshore petroleum and natural gas gathering and boosting facilities that estimate their number of pneumatic devices. actualCount W W1587V3 Actual Count. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/ActualCount actualCount W W1588V3 Estimated Count. This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities that are in the first or second year of estimating their number of pneumatic devices, and have not otherwise provided an actual count. estimatedCount W W1589V3 Estimated Count. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/EstimatedCount estimatedCount W W1590V3 Were missing data procedures used for any parameters to calculate GHG emissions? This data element is required. missingDataProceduresUsed W W1591V3 Total Count for High-bleed Pneumatic Devices. This data element is required. totalCount W W1592V3 Total Count for High-bleed Pneumatic Devices. You must enter a value that is greater than or equal to zero. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/TotalCount totalCount W W1593V3 Total Count for Intermittent Bleed Pneumatic Devices. This data element is required. totalCount W W1594V3 Total Count for Intermittent Bleed Pneumatic Devices. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/TotalCount totalCount W W1595V3 Total Count for Low-Bleed Pneumatic Devices. This data element is required. totalCount W W1596V3 Total Count for Low-Bleed Pneumatic Devices. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/TotalCount totalCount W W1597V3 Is the Total Number of high bleed devices estimated? This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities. isTotalNumberEstimated W W1598V3 Is the Total Number of intermittent bleed devices estimated? This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities. isTotalNumberEstimated W W1599V3 Is the Total Number of low bleed devices estimated? This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities. isTotalNumberEstimated W W1600V3 Total CO2 Emissions (mt CO2). This data element is required if any pneumatic device venting is reported. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/TotalCarbonDioxideEmissions totalCo2Emissions W W1601V3 Total CO2 Emissions (mt CO2). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/TotalCarbonDioxideEmissions totalCo2Emissions W W1602V3 Total CH4 Emissions (mt CH4). This data element is required if any pneumatic device venting is reported. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/TotalCh4Emissions totalCh4Emissions W W1603V3 Total CH4 Emissions (mt CH4). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/TotalCh4Emissions totalCh4Emissions W W1604V3 Specify whether this calendar year is the first or second calendar year of reporting. This data element is required for Onshore petroleum and natural gas production facilities and Onshore petroleum and natural gas gathering and boosting facilities estimating their total number of pneumatic devices. firstCalendarYearOrSecond W W1605V3 Estimated average number of hours in the calendar year that the pneumatic devices were operating. This data element is required. estimatedNumberOfHours W W1606V3 Estimated average number of hours in the calendar year that the pneumatic devices were operating. You must enter a value between 1 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticDeviceTypesDetails/PneumaticDeviceTypesRowDetails/EstimatedNumberOfHours estimatedNumberOfHours W W1613V3 Select the Basin in which applicable Sub-Basins are located. This data element is required for Onshore petroleum and natural gas production facilities. basinAssociatedWithFacility W W1615V3 Does the Facility have any natural gas driven pneumatic pumps subject to reporting under 98.232 [98.236(c)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/DoesFacilityHavePneumaticPumps doesFacilityHavePneumaticPumps W W1618V3 Were missing data procedures used for any parameters to calculate GHG emissions [98.235]? This data element is required. missingDataProceduresUsed W W1619V3 Total CO2 Emissions (mt CO2) [98.236(c)(3)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/PneumaticPumpTypesDetails/PneumaticPumpTypesRowDetails/TotalCarbonDioxideEmissions totalCo2Emissions W W1620V3 Total CO2 Emissions (mt CO2). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/PneumaticPumpTypesDetails/PneumaticPumpTypesRowDetails/TotalCarbonDioxideEmissions totalCo2Emissions W W1621V3 Total CH4 Emissions [98.236(c)(4)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/PneumaticPumpTypesDetails/PneumaticPumpTypesRowDetails/TotalCh4Emissions totalCh4Emissions W W1622V3 Total CH4 Emissions. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/PneumaticPumpTypesDetails/PneumaticPumpTypesRowDetails/TotalCh4Emissions totalCh4Emissions W W1627V3 Total count of Natural Gas Driven Pneumatic pumps [98.236(c)(1)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/PneumaticPumpTypesDetails/PneumaticPumpTypesRowDetails/TotalCh4Emissions totalPneumaticPumpCount W W1628V3 Total count of Natural Gas Driven Pneumatic pumps. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/PneumaticPumpTypesDetails/PneumaticPumpTypesRowDetails/TotalPneumaticPumpCount totalPneumaticPumpCount W W1630V3 Average estimated number of hours in the calendar year that the natural gas driven pneumatic pumps were operated [98.236(c)(2)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/PneumaticPumpTypesDetails/PneumaticPumpTypesRowDetails/TotalPneumaticPumpCount estimatedNumberOfHours W W1631V3 Average estimated number of hours in the calendar year that the natural gas driven pneumatic pumps were operated. You must enter a value between 1 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/PneumaticPumpTypesDetails/PneumaticPumpTypesRowDetails/EstimatedNumberOfHours estimatedNumberOfHours W W1635V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/NatGasPumpsMissingDataProcTypesDetails/NatGasPumpsMissingDataProcTypesRowDetails/PpMissingQuarters ppMissingQuarters W W1637V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/NaturalGasDrivenPneumaticPumpsDetails/NatGasPumpsMissingDataProcTypesDetails/NatGasPumpsMissingDataProcTypesRowDetails/PpMissingHours ppMissingHours W W1639V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticMissingDataProcTypesDetails/PneumaticMissingDataProcTypesRowDetails/PdMissingQuarters pdMissingQuarters W W1640V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 1 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/PneumaticDeviceVentingDetails/PneumaticMissingDataProcTypesDetails/PneumaticMissingDataProcTypesRowDetails/PdMissingHours pdMissingHours W W1643V3 The SubpartWSummaryDetails node is required for all segments. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails summaryData W W1644V3 Natural Gas Pneumatic Devices [98.236(b)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1645V3 Natural Gas Driven Pneumatic Pumps [98.236(c)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1646V3 Acid Gas Removal Units [98.236(d)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1647V3 Dehydrators [98.236(e)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1648V3 Well Venting for Liquids Unloading [98.236(f)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1649V3 Completions and Workovers with Hydraulic Fracturing [98.236(g)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1650V3 Blowdown Vent Stacks [98.236(i)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1651V3 Gas from Produced Oil Sent to Atmospheric Tanks [98.236(j)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1652V3 Transmission Tanks [98.236(k)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1653V3 Well Testing Venting and Flaring [98.236(l)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1654V3 Associated Gas Venting and Flaring [98.236(m)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1655V3 Flare Stacks [98.236(n)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1656V3 Centrifugal Compressors [98.236(o)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1657V3 Reciprocating Compressors [98.236(p)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1658V3 Other Emissions from Equipment Leaks Estimated Using Emission Factors [98.236(q, r)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1659V3 Enhanced Oil Recovery Injection Pumps [98.236(w)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1660V3 Enhanced Oil Recovery Hydrocarbon Liquids [98.236(x)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1661V3 Onshore Petroleum and Natural Gas Production, Onshore Petroleum and Natural Gas Gathering and Boosting, and Natural Gas Distribution Combustion Emissions [98.236(z)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1662V3 Offshore Sources [98.236(s)]. This source is not required by the selected industry segment. Please do not include emissions from this source. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/SubpartWSummaryDetails/SubpartWSourceReportingFormDetails/SubpartWSourceReportingFormRowDetails/ReportingCategory reportingCategory W W1664V3 Select the County and State in which the Sub-Basin is located. This data element is required for facilities in the Onshore petroleum and natural gas production segment. subBasinCounty W W1665V3 Select the Formation Type of the Sub-Basin. This data element is required for the selected County/State. subBasinFormationType W W1666V3 Average API Gravity of all wells (degrees). This data element is required for oil formations. apiGravity W W1667V3 Average API Gravity of all wells (degrees). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/ApiGravity apiGravity W W1668V3 Average Gas-to-Oil Ratio (thousand standard cubic feet per barrel). This data element is required for oil formations. gasOilWellRatio W W1669V3 Average Gas-to-Oil Ratio (thousand standard cubic feet per barrel). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/GasOilWellRatio gasOilWellRatio W W1670V3 Average Low Pressure Separator Pressure (psig). This data element is required for oil formations. averageLowPressure W W1674V3 Average API Gravity (degrees). This data element is not required. This data element is required for sub-basin formation types of oil only. apiGravity W W1675V3 Average Gas-to-Oil Ratio (thousand standard cubic feet of gas per barrel of oil). This data element is not required. This data element is required for sub-basin formation types of oil only. gasOilWellRatio W W1676V3 Average Low Pressure Separator Pressure (psig). This data element is not required. This data element is required for sub-basin formation types of oil only. averageLowPressure W W1677V3 The OnshoreRequirementsDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails onshoreRequirementsData W W1679V3 Quantity of gas produced from wells. This element is required for facilities in the Onshore petroleum and natural gas production sector. gasProducedCalendarYearFromWells W W1680V3 Quantity of gas produced for sales. This element is required for facilities in the Onshore petroleum and natural gas production sector. gasProducedCalendarYearForSales W W1681V3 Quantity of crude oil and condensate produced for sales. This element is required for facilities in the Onshore petroleum and natural gas production sector. oilProducedCalendarYearForSales W W1682V3 Number of producing wells. This element is required for the Onshore petroleum and natural gas production industry segment. wellProducingEndOfYear W W1683V3 Number of producing wells. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/WellProducingEndOfYear wellProducingEndOfYear W W1684V3 Number of producing wells acquired. This element is required for the Onshore petroleum and natural gas production industry segment. producingWellsAcquired W W1685V3 Number of producing wells acquired. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/ProducingWellsAcquired producingWellsAcquired W W1686V3 Number of producing wells divested. This element is required for the Onshore petroleum and natural gas production industry segment. producingWellsDivested W W1687V3 Number of producing wells divested. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/ProducingWellsDivested producingWellsDivested W W1688V3 Number of wells completed. This element is required for the Onshore petroleum and natural gas production industry segment. wellsCompleted W W1689V3 Number of wells completed. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/WellsCompleted wellsCompleted W W1690V3 Number of wells permanently taken out of production. This element is required for this industry segment. wellRemovedFromProduction W W1691V3 Number of wells permanently taken out of production. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/WellRemovedFromProduction wellRemovedFromProduction W W1692V3 Average mole fraction of CH4 in produced gas. This element is required for the Onshore petroleum and natural gas production industry segment. ch4AverageMoleFraction W W1693V3 Average mole fraction of CH4 in produced gas. You must enter a value that is between zero and 1. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/Ch4AverageMoleFraction ch4AverageMoleFraction W W1694V3 Average mole fraction of CO2 in produced gas. This element is required for the Onshore petroleum and natural gas production industry segment. co2AverageMoleFraction W W1695V3 Average mole fraction of CO2 in produced gas. You must enter a value that is between zero and 1. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OnshoreProductionRequirementsDetails/OnshoreProductionRequirementsSubBasinRowDetails/Co2AverageMoleFraction co2AverageMoleFraction W W1696V3 Total quantity of gas handled at the offshore platform [98.236(aa)(2)(i)]. This element is required for this industry segment. quantityOfGasHandled W W1697V3 Total quantity of gas handled at the offshore platform [98.236(aa)(2)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewOffshoreProductionDetails/FacilityOverviewOffshoreProductionRowDetails/QuantityOfGasHandled quantityOfGasHandled W W1698V3 Total quantity of oil and condensate handled at the offshore platform [98.236(aa)(2)(ii)]. This element is required for this industry segment. quantityOfOilHandled W W1699V3 Total quantity of oil and condensate handled at the offshore platform [98.236(aa)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewOffshoreProductionDetails/FacilityOverviewOffshoreProductionRowDetails/QuantityOfOilHandled quantityOfOilHandled W W1702V3 Quantity of processed gas leaving the gas processing plant [98.236(aa)(3)(ii)]. This element is required for this industry segment. quantityOfResidueGasLeaving W W1703V3 Quantity of processed gas leaving the gas processing plant [98.236(aa)(3)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasProcessingDetails/FacilityOverviewNaturalGasProcessingRowDetails/QuantityOfResidueGasLeaving quantityOfResidueGasLeaving W W1705V3 Cumulative quantity of NGLs received at gas processing plant [98.236(aa)(3)(iii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasProcessingDetails/FacilityOverviewNaturalGasProcessingRowDetails/QuantityOfAllNGLReceived quantityOfAllNGLReceived W W1707V3 Cumulative quantity of NGLs leaving the gas processing plant [98.236(aa)(3)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasProcessingDetails/FacilityOverviewNaturalGasProcessingRowDetails/QuantityOfAllNGLLeaving quantityOfAllNGLLeaving W W1708V3 Average mole fraction of CH4 in natural gas received [98.236(aa)(3)(v)]. This element is required for this industry segment. ch4AverageMoleFraction W W1709V3 Average mole fraction of CH4 in natural gas received [98.236(aa)(3)(v)]. You must enter a value that is greater than or equal to zero and less than or equal to 1. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasProcessingDetails/FacilityOverviewNaturalGasProcessingRowDetails/Ch4AverageMoleFraction ch4AverageMoleFraction W W1710V3 Average mole fraction of CO2 in natural gas received [98.236(aa)(3)(vi)]. This element is required for this industry segment. co2AverageMoleFraction W W1711V3 Average mole fraction of CO2 in natural gas received [98.236(aa)(3)(vi)]. You must enter a value that is greater than or equal to zero and less than or equal to 1. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasProcessingDetails/FacilityOverviewNaturalGasProcessingRowDetails/Co2AverageMoleFraction co2AverageMoleFraction W W1713V3 Quantity of gas transported through compressor station [98.236(aa)(4)(i)]. This element is required for this industry segment. quantityOfGasTransported W W1714V3 Quantity of gas transported through compressor station [98.236(aa)(4)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasTransmissionDetails/FacilityOverviewNaturalGasTransmissionRowDetails/QuantityOfGasTransported quantityOfGasTransported W W1715V3 Number of compressors [98.236(aa)(4)(ii)]. This element is required for this industry segment. numberOfCompressors W W1716V3 Number of compressors [98.236(aa)(4)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasTransmissionDetails/FacilityOverviewNaturalGasTransmissionRowDetails/NumberOfCompressors numberOfCompressors W W1717V3 Total compressor power rating [98.236(aa)(4)(iii)]. This element is required for this industry segment. compressorPowerRating W W1718V3 Total compressor power rating [98.236(aa)(4)(iii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasTransmissionDetails/FacilityOverviewNaturalGasTransmissionRowDetails/CompressorPowerRating compressorPowerRating W W1719V3 Average upstream pipeline pressure [98.236(aa)(4)(iv)]. This element is required for this industry segment. upstreamPipelinePressure W W1721V3 Average downstream pipeline pressure [98.236(aa)(4)(v)]. This element is required for this industry segment. downstreamPipelinePressure W W1723V3 Quantity of gas injected into storage [98.236(aa)(5)(i)]. This element is required for this industry segment. quantityOfGasInjected W W1724V3 Quantity of gas injected into storage [98.236(aa)(5)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewUndergroundNaturalGasDetails/FacilityOverviewUndergroundNaturalGasRowDetails/QuantityOfGasInjected quantityOfGasInjected W W1725V3 Quantity of gas withdrawn from storage [98.236(aa)(5)(ii)]. This element is required for this industry segment. quantityOfGasWithdrawn W W1726V3 Quantity of gas withdrawn from storage [98.236(aa)(5)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewUndergroundNaturalGasDetails/FacilityOverviewUndergroundNaturalGasRowDetails/QuantityOfGasWithdrawn quantityOfGasWithdrawn W W1727V3 Total storage capacity [98.236(aa)(5)(iii)]. This element is required for this industry segment. totalStorageCapacity W W1728V3 Total storage capacity [98.236(aa)(5)(iii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewUndergroundNaturalGasDetails/FacilityOverviewUndergroundNaturalGasRowDetails/TotalStorageCapacity totalStorageCapacity W W1729V3 Quantity imported [98.236(aa)(6)]. This element is required for this industry segment. quantityImported W W1730V3 Quantity imported [98.236(aa)(6)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewLngImportExportEquipmentDetails/FacilityOverviewLngImportExportEquipmentRowDetails/QuantityImported quantityImported W W1731V3 Quantity exported [98.236(aa)(7)]. This element is required for this industry segment. quantityExported W W1732V3 Quantity exported [98.236(aa)(7)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewLngImportExportEquipmentDetails/FacilityOverviewLngImportExportEquipmentRowDetails/QuantityExported quantityExported W W1733V3 Quantity of LNG added to storage [98.236(aa)(8)(i)]. This element is required for this industry segment. quantityLNGAdded W W1734V3 Quantity of LNG added to storage [98.236(aa)(8)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewLngStorageDetails/FacilityOverviewLngStorageRowDetails/QuantityLNGAdded quantityLNGAdded W W1735V3 Quantity of LNG withdrawn from storage [98.236(aa)(8)(ii)]. This element is required for this industry segment. quantityLNGWithdrawn W W1736V3 Quantity of LNG withdrawn from storage [98.236(aa)(8)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewLngStorageDetails/FacilityOverviewLngStorageRowDetails/QuantityLNGWithdrawn quantityLNGWithdrawn W W1737V3 Total storage capacity [98.236(aa)(8)(iii)]. This element is required for this industry segment. totalStorageCapacity W W1738V3 Total storage capacity [98.236(aa)(8)(iii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewLngStorageDetails/FacilityOverviewLngStorageRowDetails/TotalStorageCapacity totalStorageCapacity W W1739V3 Quantity of natural gas received at custody transfer stations [98.236(aa)(9)(i)]. This element is required for this industry segment. quantityGasReceived W W1740V3 Quantity of natural gas received at custody transfer stations [98.236(aa)(9)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasDistributionDetails/FacilityOverviewNaturalGasDistributionRowDetails/QuantityGasReceived quantityGasReceived W W1741V3 Quantity of natural gas withdrawn from in-system storage [98.236(aa)(9)(ii)]. This element is required for this industry segment. quantityGasWithdrawn W W1742V3 Quantity of natural gas withdrawn from in-system storage [98.236(aa)(9)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasDistributionDetails/FacilityOverviewNaturalGasDistributionRowDetails/QuantityGasWithdrawn quantityGasWithdrawn W W1745V3 Quantity of natural gas delivered to end users [98.236(aa)(9)(iv)]. This element is required for this industry segment. quantityGasDelivered W W1746V3 Quantity of natural gas delivered to end users [98.236(aa)(9)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasDistributionDetails/FacilityOverviewNaturalGasDistributionRowDetails/QuantityGasDelivered quantityGasDelivered W W1749V3 Quantity of natural gas consumed by LDC for operational purposes [98.236(aa)(9)(vi)]. This element is required for this industry segment. quantityGasConsumed W W1750V3 Quantity of natural gas consumed by LDC for operational purposes [98.236(aa)(9)(vi)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasDistributionDetails/FacilityOverviewNaturalGasDistributionRowDetails/QuantityGasConsumed quantityGasConsumed W W1751V3 Quantity of natural gas stolen [98.236(aa)(9)(vii)]. This element is required for this industry segment. quantityGasStolen W W1752V3 Quantity of natural gas stolen [98.236(aa)(9)(vii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FacilityOverviewDetails/FacilityOverviewNaturalGasDistributionDetails/FacilityOverviewNaturalGasDistributionRowDetails/QuantityGasStolen quantityGasStolen W W1753V3 Does the Facility have any acid gas removal units that vent directly to the atmosphere, to a flare or engine, or to a sulfur recovery plant subject to reporting under 98.232 [98.236(d)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/DoesFacilityHaveAcidGasRemovalUnits doesFacilityHaveAcidGasRemovalUnits W W1754V3 Were missing data procedures used for any parameters to calculate GHG emissions [98.235]? This data element is required. missingDataProceduresUsed W W1755V3 Unit ID or Name. This data element is required for each unit reported. unitId W W1756V3 Sub-Basin ID [98.236(d)(1)(vi)]. This data element is required. subBasinId W W1757V3 Calculation Methodology Used. This data element is required for each unit reported. calculationMethodology W W1758V3 Total CO2 Emissions. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasInfoDetails/AcidGasInfoRowDetails/TotalCo2Emissions totalCo2Emissions W W1759V3 Total CO2 Emissions. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasInfoDetails/AcidGasInfoRowDetails/TotalCo2Emissions totalCo2Emissions W W1760V3 Are any CO2 emissions from the acid gas removal unit recovered and transferred outside the facility? This data element is required for each unit reported. co2EmissionsRecoveredAndTransfered W W1761V3 Annual average fraction of CO2 content in the vent from the acid gas removal unit. This data element is required for Calculation Method 1. averageVentCo2Fraction W W1762V3 Annual average fraction of CO2 content in the vent from the acid gas removal unit. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod1EmissionsDetails/AcidGasCalcMethod1EmissionsRowDetails/AverageVentCo2Fraction averageVentCo2Fraction W W1763V3 Total feed rate entering the acid gas removal unit for the year (million cubic feet) [98.236(d)(1)(ii)]. This data element is required. totalAnnualFeedRate W W1765V3 Acid Gas Removal Units Table. Data is required. table1Data W W1766V3 Unit ID or Name. This data element is required for each unit reported. Please check that a Unit ID is provided in Table D.1 with the calculation method of "Calculation Methodology 1 [98.233(d)(1)]" and that the information for that unit is provided on the correct row of Table D.2. For XML reporters, please check that a Unit ID is provided in AcidGasCalcMethod1EmissionsRowDetails/UnitId. Please review and correct. unitId W W1767V3 Annual volume of gas vented from the acid gas removal unit. This data element is required. annualVolumeVentCo2Method1 W W1768V3 Annual volume of gas vented from the acid gas removal unit. This value should be reported as a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod1EmissionsDetails/AcidGasCalcMethod1EmissionsRowDetails/AnnualVolumeVentCo2Method1 annualVolumeVentCo2Method1 W W1770V3 Annual average fraction of CO2 content in the vent from the acid gas removal unit. This data element is required. averageVentCo2Fraction W W1771V3 Annual average fraction of CO2 content in the vent from the acid gas removal unit. You must enter a value that is greater than or equal to zero and less than or equal to 1. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod2EmissionsDetails/AcidGasCalcMethod2EmissionsRowDetails/AverageVentCo2Fraction averageVentCo2Fraction W W1772V3 Annual volume of gas vented from the acid gas removal unit. This data element is required. annualVolumeVentCo2Method2 W W1773V3 Annual volume of gas vented from the acid gas removal unit. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod2EmissionsDetails/AcidGasCalcMethod2EmissionsRowDetails/AnnualVolumeVentCo2Method2 annualVolumeVentCo2Method2 W W1775V3 Annual average volume fraction of CO2 content of natural gas into the acid gas removal unit. This data element is required. averageFractionCo2ContentInUnit W W1776V3 Annual average fraction of CO2 content of natural gas into the acid gas removal unit. You must enter a value that is greater than or equal to zero and less than or equal to 1. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod3EmissionsDetails/AcidGasCalcMethod3EmissionsRowDetails/AverageFractionCo2ContentInUnit averageFractionCo2ContentInUnit W W1777V3 Equation Used (W-4A/W-4B). This data element is required. equationUsedMethod3 W W1778V3 Natural gas flow rate into the acid gas removal unit. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod3EmissionsDetails/AcidGasCalcMethod3EmissionsRowDetails/NaturalGasFlowRateInMethod3 naturalGasFlowRateInMethod3 W W1779V3 Natural gas flow rate into the acid gas removal unit. This data element is required only for equation W-4A. naturalGasFlowRateInMethod3 W W1780V3 Natural gas flow rate out of the acid gas removal unit. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod3EmissionsDetails/AcidGasCalcMethod3EmissionsRowDetails/NaturalGasFlowRateOutMethod3 naturalGasFlowRateOutMethod3 W W1781V3 Natural gas flow rate out of the acid gas removal unit. This data element is required only for equation W-4B. naturalGasFlowRateOutMethod3 W W1782V3 Annual average fraction of CO2 content of natural gas out of the acid gas removal unit. This data element is required. averageFractionCo2ContentOutUnit W W1783V3 Annual average fraction of CO2 content of natural gas out of the acid gas removal unit. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod3EmissionsDetails/AcidGasCalcMethod3EmissionsRowDetails/AverageFractionCo2ContentOutUnit averageFractionCo2ContentOutUnit W W1785V3 Temperature used to calculate natural gas flow rates [98.233]. This data element is required. naturalGasCalculationTempMethod3 W W1788V3 Name of simulation software package used. This data element is required for each unit reported. simulationSoftware W W1789V3 Natural gas feed temperature. This data element is required for each unit reported. naturalGasFeedTemp W W1791V3 Natural gas feed pressure. This data element is required for each unit reported. naturalGasFeedPressure W W1793V3 Natural gas feed flow rate. This data element is required for each unit reported. naturalGasFlowRate W W1794V3 Natural gas feed flow rate. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod4EmissionsDetails/AcidGasCalcMethod4EmissionsRowDetails/NaturalGasFlowRate naturalGasFlowRate W W1795V3 Acid gas content of feed natural gas. This data element is required for each unit reported. naturalGasAcidGasContent W W1796V3 Acid gas content of feed natural gas. You must enter a value that is greater than or equal to zero and less than one hundred. The value you provided is outside that range. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod4EmissionsDetails/AcidGasCalcMethod4EmissionsRowDetails/NaturalGasAcidGasContent naturalGasAcidGasContent W W1797V3 Acid gas content of outlet natural gas. This data element is required for each unit reported. outletNaturalGasAcidGasContent W W1798V3 Acid gas content of outlet natural gas. You must enter a value that is greater than or equal to zero and less than one hundred. The value you provided is outside that range. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod4EmissionsDetails/AcidGasCalcMethod4EmissionsRowDetails/OutletNaturalGasAcidGasContent outletNaturalGasAcidGasContent W W1799V3 Unit operating hours. This data element is required for each unit reported. unitOperatingHours W W1800V3 Unit operating hours. You must enter a value that is greater than or equal to zero and less than {1}. The value you provided is outside that range. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod4EmissionsDetails/AcidGasCalcMethod4EmissionsRowDetails/UnitOperatingHours unitOperatingHours W W1801V3 Exit temperature of the natural gas. This data element is required for each unit reported. naturalGasExitTemp W W1803V3 Solvent pressure. This data element is required for each unit reported. solventPressure W W1805V3 Solvent temperature. This data element is required for each unit reported. solventTemp W W1807V3 Solvent circulation rate. This data element is required for each unit reported. solventCirculationRate W W1808V3 Solvent circulation rate. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod4EmissionsDetails/AcidGasCalcMethod4EmissionsRowDetails/SolventCirculationRate solventCirculationRate W W1809V3 Solvent weight. This data element is required for each unit reported. solventWeight W W1810V3 Solvent weight. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod4EmissionsDetails/AcidGasCalcMethod4EmissionsRowDetails/SolventWeight solventWeight W W1811V3 Pressure used to calculate natural gas flow rates. This data element is required. naturalGasCalculationPressureMethod3 W W1812V3 Temperature used to calculate volume of gas vented (<sup>o</sup>F) [98.233]. This data element is required. volumeVentCalculationTempMethod2 W W1813V3 Temperature used to calculate volume of gas vented (<sup>o</sup>F) [98.233]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod2EmissionsDetails/AcidGasCalcMethod2EmissionsRowDetails/VolumeVentCalculationTempMethod2 volumeVentCalculationTempMethod2 W W1814V3 Pressure used to calculate volume of gas vented (psi) [98.233]. This data element is required. volumeVentCalculationPressureMethod2 W W1815V3 Pressure used to calculate volume of gas vented (psi) [98.233]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasCalcMethod2EmissionsDetails/AcidGasCalcMethod2EmissionsRowDetails/VolumeVentCalculationPressureMethod2 volumeVentCalculationPressureMethod2 W W1822V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. The value you provided is outside that range. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidMissingAcidDataProcUsedDetails/AcidMissingAcidDataProcUsedRowDetails/MissingNumberofQuarters missingNumberofQuarters W W1823V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidMissingAcidDataProcUsedDetails/AcidMissingAcidDataProcUsedRowDetails/MissingNumberofHours missingNumberofHours W W1826V3 Total feed rate entering the acid gas removal unit for the year (million cubic feet) [98.236(d)(1)(ii)]. This value should be reported as a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails/AcidGasInfoDetails/AcidGasInfoRowDetails/TotalAnnualFeedRate totalAnnualFeedRate W W1827V3 The AcidGasRemovalUnitsDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AcidGasRemovalUnitsDetails acidGasRemovalData W W1828V3 Did the facility send hydrocarbon liquids to atmospheric tanks that are subject to reporting under 98.232 [98.236(j)]? This data element is required for facilities in the Onshore petroleum and natural gas production industry and the Onshore petroleum and natural gas gathering and boosting industry segment. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/DidFacilityHaveGasFromProducedOil didFacilityHaveGasFromProducedOil W W1829V3 Was Calculation Method 1 used to calculate emissions [(98.233(j)(1)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/CalcMethod1Used calcMethod1Used W W1830V3 Was Calculation Method 2 used to calculate emissions [(98.233(j)(2)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/CalcMethod2Used calcMethod2Used W W1831V3 Was Calculation Method 3 used to calculate emissions [(98.233(j)(3)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/CalcMethod3Used calcMethod3Used W W1832V3 If Calculation Method 1 or 2 were used, were any atmospheric tanks observed to have malfunctioning dump valves during the calendar year? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/MalfunctioningDumpValves malfunctioningDumpValves W W1833V3 Were missing data procedures used for any parameters to calculate GHG emissions [98.235]? This data element is required. missingDataProceduresUsed W W1834V3 Sub-Basin ID [98.236(j)(1)(i)]. You are in the Onshore petroleum and natural gas production industry segment and reported using Calculation Method 1 or 2. This data element is required. subBasinIdentifier W W1835V3 Select Calculation Methodology Used (Select from list) [98.236(j)(1)(ii)]. You reported using Calculation Method 1 or 2. This data element is required. calculationMethodology W W1836V3 Name of software package used for Calculation Method 1 [98.236(j)(1)(ii)]. You reported using Calculation Method 1. This data element is required. softwarePackageUsed W W1837V3 Are the only wells used to calculate "total volume of oil" in the sub-basin wildcat or delineation wells subject to a 2-year delay in reporting? [98.236(j)(1)(iii)]. You reported using Calculation Method 1 or 2. This data element is required for Onshore petroleum and natural gas production facilities. twoYearDelayIndicator W W1838V3 Total volume of oil sent to tanks from all gas-liquid separators and direct from wells or non-separator equipment (bbl per yr) [98.236(j)(1)(iii)]. This data element is required. totalVolumeOfOil W W1839V3 Total volume of oil sent to tanks from all gas-liquid separators and direct from wells or non-separator equipment (bbl per yr) [98.236(j)(1)(iii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/TotalVolumeOfOil totalVolumeOfOil W W1840V3 Average gas-liquid separator or non-separator equipment temperature (<sup>o</sup>F) [98.236(j)(1)(iv)]. You reported using Calculation Method 1 or 2. This data element is required. averageSeparatorTemperature W W1842V3 Average gas-liquid separator pressure or non-separator equipment (psig) [98.236(j)(1)(v)]. You reported using Calculation Method 1 or 2. This data element is required. averagePressure W W1844V3 Average sales oil or stabilized oil API gravity (degrees) [98.236(j)(1)(vi)]. You reported using Calculation Method 1 or 2. This data element is required. averageAPIGravity W W1845V3 Average sales oil or stabilized oil API gravity (degrees) [98.236(j)(1)(vi)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/AverageAPIGravity averageAPIGravity W W1846V3 Minimum concentration of CO2 in flash gas (mole fraction) [98.236(j)(1)(vii)]. You reported using Calculation Method 1 or 2. This data element is required. minimumFlashGasCo2Concentration W W1847V3 Minimum concentration of CO2 in flash gas (mole fraction) [98.236(j)(1)(vii)]. You must enter a numeric value greater than or equal to zero and less than or equal to one. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/MinimumFlashGasCarbonDioxideConcentration minimumFlashGasCo2Concentration W W1848V3 Maximum concentration of CO2 in flash gas (mole fraction) [98.236(j)(1)(vii)]. You reported using Calculation Method 1 or 2. This data element is required. maximumFlashGasCo2Concentration W W1849V3 Maximum concentration of CO2 in flash gas (mole fraction) [98.236(j)(1)(vii)]. You must enter a numeric value greater than or equal to zero and less than or equal to one. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/MaximumFlashGasCarbonDioxideConcentration maximumFlashGasCo2Concentration W W1850V3 Minimum concentration of CH4 in flash gas (mole fraction) [98.236(j)(1)(viii)]. You reported using Calculation Method 1 or 2. This data element is required. minimumFlashGasCh4Concentration W W1851V3 Minimum concentration of CH4 in flash gas (mole fraction) [98.236(j)(1)(viii)]. You must enter a numeric value greater than or equal to zero and less than or equal to one. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/MinimumFlashMethaneConcentration minimumFlashGasCh4Concentration W W1852V3 Maximum concentration of CH4 in flash gas (mole fraction) [98.236(j)(1)(viii)]. You reported using Calculation Method 1 or 2. This data element is required. maximumFlashGasCh4Concentration W W1853V3 Maximum concentration of CH4 in flash gas (mole fraction) [98.236(j)(1)(viii)]. You must enter a numeric value greater than or equal to zero and less than or equal to one. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/MaximumFlashMethaneConcentration maximumFlashGasCh4Concentration W W1854V3 Number of wells sending oil to gas-liquid separators or directly to atmospheric tanks [98.236(j)(1)(ix)]. You reported using Calculation Method 1 or 2. This data element is required for Onshore petroleum and natural gas production facilities. numberOfWellHeadSeparators W W1855V3 Number of wells sending oil to gas-liquid separators or directly to atmospheric tanks [98.236(j)(1)(ix)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/NumberOfWellHeadSeparators numberOfWellHeadSeparators W W1856V3 Count of atmospheric tanks [98.236(j)(1)(x)]. You reported using Calculation Method 1 or 2. This data element is required. atmosphericTankCount W W1857V3 Count of atmospheric tanks [98.236(j)(1)(x)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/AtmosphericTankCount atmosphericTankCount W W1858V3 Estimated number of atmospheric tanks not on well pads [98.236(j)(1)(xi)]. You reported using Calculation Method 1 or 2. This data element is required for Onshore petroleum and natural gas production facilities. notOnWellPadTankCount W W1859V3 Estimated number of atmospheric tanks not on well pads [98.236(j)(1)(xi)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/NotOnWellPadTankCount notOnWellPadTankCount W W1860V3 Were any emissions from atmospheric tanks controlled with vapor recovery systems? [98.236(j)(1)(xii)]. You reported using Calculation Method 1 or 2. This data element is required. wereEmissionsVaporRecovery W W1861V3 Count of tanks that control emissions with vapor recovery systems [98.236(j)(1)(xii)(A)]. You reported using Calculation Method 1 or 2 and emissions controlled with vapor recovery systems. This data element is required. tanksWithVaporRecovery W W1862V3 Count of tanks that control emissions with vapor recovery systems [98.236(j)(1)(xii)(A)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/TanksWithVaporRecovery tanksWithVaporRecovery W W1863V3 Total CO2 mass that was recovered (mt CO2) [98.236(j)(1)(xii)(B)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/AnnualCarbonDioxideRecovered annualCo2Recovered W W1864V3 Total CO2 mass that was recovered (mt CO2) [98.236(j)(1)(xii)(B)]. You reported using Calculation Method 1 or 2 and emissions controlled with vapor recovery systems. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/AnnualCarbonDioxideRecovered annualCo2Recovered W W1865V3 Total CH4 mass that was recovered (mt CH4) [98.236(j)(1)(xii)(C)]. You reported using Calculation Method 1 or 2 and emissions controlled with vapor recovery systems. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/AnnualCarbonDioxideRecovered annualCh4Recovered W W1866V3 Total CH4 mass that was recovered (mt CH4) [98.236(j)(1)(xii)(C)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/AnnualMethaneRecovered annualCh4Recovered W W1867V3 Annual CO2 emissions from tanks with vapor recovery systems (mt CO2) [98.236(j)(1)(xii)(D)]. You reported using Calculation Method 1 or 2 and emissions controlled with vapor recovery systems. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/VaporRecoveryCO2Emissions vaporRecoveryCO2Emissions W W1868V3 Annual CO2 emissions from tanks with vapor recovery systems (mt CO2) [98.236(j)(1)(xii)(D)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/VaporRecoveryCO2Emissions vaporRecoveryCO2Emissions W W1869V3 Annual CH4 emissions from tanks with vapor recovery systems (mt CH4) [98.236(j)(1)(xii)(E)]. You reported using Calculation Method 1 or 2 and emissions controlled with vapor recovery systems. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/VaporRecoveryCH4Emissions vaporRecoveryCH4Emissions W W1870V3 Annual CH4 emissions from tanks with vapor recovery systems (mt CH4) [98.236(j)(1)(xii)(E)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/VaporRecoveryCH4Emissions vaporRecoveryCH4Emissions W W1871V3 Were any emissions from atmospheric tanks vented directly to the atmosphere? [98.236(j)(1)(xiii)]. You reported using Calculation Method 1 or 2. This data element is required. wereEmissionsAtmosphere W W1872V3 Count of tanks that vented directly to the atmosphere [98.236(j)(1)(xiii)(A)]. You reported using Calculation Method 1 or 2 and venting emissions to the atmosphere. This data element is required. tanksWithEmissionControl W W1873V3 Count of tanks that vented directly to the atmosphere [98.236(j)(1)(xiii)(A)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/TanksWithEmissionControl tanksWithEmissionControl W W1874V3 Annual CO2 emissions from venting (mt CO2) [98.236(j)(1)(xiii)(B)]. You reported using Calculation Method 1 or 2 and venting emissions to the atmosphere. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W1875V3 Annual CO2 emissions from venting (mt CO2) [98.236(j)(1)(xiii)(B)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W1876V3 Annual CH4 emissions from venting (mt CH4) [98.236(j)(1)(xiii)(C)]. You reported using Calculation Method 1 or 2 and venting emissions to the atmosphere. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/VentingCh4Emissions ventingCh4Emissions W W1877V3 Annual CH4 emissions from venting (mt CH4) [98.236(j)(1)(xiii)(C)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/VentingCh4Emissions ventingCh4Emissions W W1878V3 Were any emissions from atmospheric tanks vented to flare(s)? [98.236(j)(1)(xiv)]. You reported using Calculation Method 1 or 2. This data element is required. wereEmissionsFlares W W1879V3 Count of tanks with flaring emission control measures [98.236(j)(1)(xiv)(A)]. You reported using Calculation Method 1 or 2 and flaring emissions. This data element is required. tanksWithFlaring W W1880V3 Count of tanks with flaring emission control measures [98.236(j)(1)(xiv)(A)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/TanksWithFlaring tanksWithFlaring W W1881V3 Annual CO2 emissions from flaring (mt CO2) [98.236(j)(1)(xiv)(B)]. You reported using Calculation Method 1 or 2 and flaring emissions. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W1882V3 Annual CO2 emissions from flaring (mt CO2) [98.236(j)(1)(xiv)(B)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W1883V3 Annual CH4 emissions from flaring (mt CH4) [98.236(j)(1)(xiv)(C)]. You reported using Calculation Method 1 or 2 and flaring emissions. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/FlaringCh4Emissions flaringCh4Emissions W W1884V3 Annual CH4 emissions from flaring (mt CH4) [98.236(j)(1)(xiv)(C)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/FlaringCh4Emissions flaringCh4Emissions W W1885V3 Annual N2O emissions from flaring (mt N2O) [98.236(j)(1)(xiv)(D)]. You reported using Calculation Method 1 or 2 and flaring emissions. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/FlaringN2OEmissions flaringN2oEmissions W W1886V3 Annual N2O emissions from flaring (mt N2O) [98.236(j)(1)(xiv)(D)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodOneOrTwoDetails/AtmosphericTanksCalculationMethodOneOrTwoSubBasinRowDetails/FlaringN2OEmissions flaringN2oEmissions W W1887V3 Estimate of fraction of oil/condensate throughput sent to tanks in basin with flaring [98.236(j)(2)(i)(B)]. You reported using Calculation Method 3. This data element is required. fractionOfOilThroughputWithFlaring W W1888V3 Estimate of fraction of oil/condensate throughput sent to tanks in basin with flaring [98.236(j)(2)(i)(B)]. You must enter a numeric value greater than zero and less than or equal to one. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodThreeDetails/AtmosphericTanksCalculationMethodThreeRowDetails/FractionOfOilThroughputWithFlaring fractionOfOilThroughputWithFlaring W W1889V3 Estimate of fraction of oil/condensate throughput sent to tanks with vapor recovery system control measures [98.236(j)(2)(i)(C)]. You reported using Calculation Method 3. This data element is required. fractionOfOilThroughputWithVapor W W1890V3 Estimate of fraction of oil/condensate throughput sent to tanks with vapor recovery system control measures [98.236(j)(2)(i)(C)]. You must enter a numeric value greater than zero and less than or equal to one. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodThreeDetails/AtmosphericTanksCalculationMethodThreeRowDetails/FractionOfOilThroughputWithVapor fractionOfOilThroughputWithVapor W W1891V3 Count of atmospheric tanks in basin [98.236(j)(2)(i)(D)]. You reported using Calculation Method 3. This data element is required. atmosphericTankCount W W1892V3 Count of atmospheric tanks in basin [98.236(j)(2)(i)(D)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodThreeDetails/AtmosphericTanksCalculationMethodThreeRowDetails/AtmosphericTankCount atmosphericTankCount W W1893V3 Count of wells with gas-liquid separators, Count [98.236(j)(2)(i)(E)]. You reported using Calculation Method 3. This data element is required for facilities in the Onshore petroleum and natural gas production industry. gasWellsCount W W1894V3 Count of wells with gas-liquid separators, Count [98.236(j)(2)(i)(E)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodThreeDetails/AtmosphericTanksCalculationMethodThreeRowDetails/GasWellsCount gasWellsCount W W1895V3 Count of wells without gas-liquid separators, Count [98.236(j)(2)(i)(F)]. You reported using Calculation Method 3. This data element is required for facilities in the Onshore petroleum and natural gas production industry. wellsWithoutGasCount W W1896V3 Count of wells without gas-liquid separators, Count [98.236(j)(2)(i)(F)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodThreeDetails/AtmosphericTanksCalculationMethodThreeRowDetails/WellsWithoutGasCount wellsWithoutGasCount W W1897V3 Are the only wells in the sub-basin used to calculate "annual oil/condensate throughput" wildcat or delineation wells subject to a 2-year delay in reporting? [98.236(j)(2)(i)(A)]. You reported using Calculation Method 3. This data element is required for facilities in the Onshore petroleum and natural gas production industry. twoYearDelayIndicator W W1898V3 Total annual oil/condensate throughput that is sent to all atmospheric tanks (barrels per year) [98.236(j)(2)(i)(A)]. You reported using Calculation Method 3. This data element is required. annualOilThroughput W W1899V3 Total annual oil/condensate throughput that is sent to all atmospheric tanks (barrels per year) [98.236(j)(2)(i)(A)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodThreeDetails/AtmosphericTanksCalculationMethodThreeRowDetails/AnnualOilThroughput annualOilThroughput W W1900V3 Sub-Basin ID [98.236(j)(2)(ii)(A)]. You reported using Calculation Method 3 and that your fraction of oil/condensate throughput sent to tanks with flaring is less than 1.0. This data element is required for Onshore petroleum and natural gas production facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalculationMethodThreeDetails/AtmosphericTanksCalculationMethodThreeRowDetails/AnnualOilThroughput subBasinId W W1901V3 Count of tanks that did not control emissions with flares [98.236(j)(2)(ii)(B)]. You reported using Calculation Method 3 and the use of tanks without flares. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeNoFlaringDetails/AtmosphericTanksCalcMethodThreeNoFlaringRowDetails/EmissionsNotControlledWithFlareCount emissionsNotControlledWithFlareCount W W1902V3 Count of tanks that did not control emissions with flares [98.236(j)(2)(ii)(B)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeNoFlaringDetails/AtmosphericTanksCalcMethodThreeNoFlaringRowDetails/EmissionsNotControlledWithFlareCount emissionsNotControlledWithFlareCount W W1903V3 Annual CO2 emissions from tanks without flares (mt CO2) [98.236(j)(2)(ii)(C)]. You reported using Calculation Method 3 and the use of tanks without flares. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeNoFlaringDetails/AtmosphericTanksCalcMethodThreeNoFlaringRowDetails/Co2Emissions co2Emissions W W1904V3 Annual CO2 emissions from tanks without flares (mt CO2) [98.236(j)(2)(ii)(C)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeNoFlaringDetails/AtmosphericTanksCalcMethodThreeNoFlaringRowDetails/Co2Emissions co2Emissions W W1905V3 Annual CH4 emissions from tanks without flares (mt CH4) [98.236(j)(2)(ii)(D)]. You reported using Calculation Method 3 and the use of tanks without flares. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeNoFlaringDetails/AtmosphericTanksCalcMethodThreeNoFlaringRowDetails/Ch4Emissions ch4Emissions W W1906V3 Annual CH4 emissions from tanks without flares (mt CH4) [98.236(j)(2)(ii)(D)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeNoFlaringDetails/AtmosphericTanksCalcMethodThreeNoFlaringRowDetails/Ch4Emissions ch4Emissions W W1907V3 Sub-Basin ID [98.236(j)(2)(iii)(A)]. You reported using Calculation Method 3 and that your fraction of oil/condensate throughput sent to tanks with flaring is greater than 0.0. This data element is required for Onshore petroleum and natural gas production facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeNoFlaringDetails/AtmosphericTanksCalcMethodThreeNoFlaringRowDetails/Ch4Emissions subBasinId W W1908V3 Count of tanks with flaring emission control measures [98.236(j)(2)(iii)(B)]. You reported using Calculation Method 3 and the use of tanks with flaring. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/EmissionsControlWithFlareCount emissionsControlWithFlareCount W W1909V3 Count of tanks with flaring emission control measures [98.236(j)(2)(iii)(B)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/EmissionsControlWithFlareCount emissionsControlWithFlareCount W W1910V3 Annual CO2 emissions from flaring (mt CO2) [98.236(j)(2)(iii)(C)]. You reported using Calculation Method 3 and the use of tanks with flaring. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/Co2Emissions co2Emissions W W1911V3 Annual CO2 emissions from flaring (mt CO2) [98.236(j)(2)(iii)(C)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/Co2Emissions co2Emissions W W1912V3 Annual CH4 emissions from flaring (mt CH4) [98.236(j)(2)(iii)(D)]. You reported using Calculation Method 3 and the use of tanks with flaring. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/Ch4Emissions ch4Emissions W W1913V3 Annual CH4 emissions from flaring (mt CH4) [98.236(j)(2)(iii)(D)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/Ch4Emissions ch4Emissions W W1914V3 Annual N2O emissions from flaring (mt N2O) [98.236(j)(2)(iii)(E)]. You reported using Calculation Method 3 and the use of tanks with flaring. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/N2OEmissions n2oEmissions W W1915V3 Annual N2O emissions from flaring (mt N2O) [98.236(j)(2)(iii)(E)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/N2OEmissions n2oEmissions W W1916V3 Sub-Basin ID [98.236(j)(3)]. You reported improperly functioning wellhead separator dump valves. This data element is required for Onshore petroleum and natural gas production facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksCalcMethodThreeWithFlaringDetails/AtmosphericTanksCalcMethodThreeWithFlaringRowDetails/N2OEmissions subBasinId W W1917V3 Count of gas-liquid separators whose liquid dump valves did not close properly [98.236(j)(3)(i)]. You reported improperly functioning gas-liquid separator dump valves. This data element is required. separatorsCount W W1918V3 Count of gas-liquid separators whose liquid dump valves did not close properly [98.236(j)(3)(i)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksImproperDumpValvesDetails/AtmosphericTanksImproperDumpValvesRowDetails/SeparatorsCount separatorsCount W W1919V3 Total time the dump valves did not close properly, Tn (hours) [98.236(j)(3)(ii)]. You reported improperly functioning gas-liquid separator dump valves. This data element is required. hoursDumpValvesDidNotClose W W1920V3 Total time the dump valves did not close properly, Tn (hours) [98.236(j)(3)(ii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksImproperDumpValvesDetails/AtmosphericTanksImproperDumpValvesRowDetails/HoursDumpValvesDidNotClose hoursDumpValvesDidNotClose W W1921V3 CO2 emissions from improperly functioning dump valves (mt CO2) [98.236(j)(3)(iii)]. You reported improperly functioning gas-liquid separator dump valves. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksImproperDumpValvesDetails/AtmosphericTanksImproperDumpValvesRowDetails/Co2Emissions co2Emissions W W1922V3 CO2 emissions from improperly functioning dump valves (mt CO2) [98.236(j)(3)(iii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksImproperDumpValvesDetails/AtmosphericTanksImproperDumpValvesRowDetails/Co2Emissions co2Emissions W W1923V3 CH4 emissions from improperly functioning dump valves (mt CH4) [98.236(j)(3)(iv)]. You reported improperly functioning gas-liquid separator dump valves. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksImproperDumpValvesDetails/AtmosphericTanksImproperDumpValvesRowDetails/Ch4Emissions ch4Emissions W W1924V3 CH4 emissions from improperly functioning dump valves (mt CH4) [98.236(j)(3)(iv)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksImproperDumpValvesDetails/AtmosphericTanksImproperDumpValvesRowDetails/Ch4Emissions ch4Emissions W W1925V3 Atmospheric Storage Tanks emission source. This form is required for this industry segment. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksImproperDumpValvesDetails/AtmosphericTanksImproperDumpValvesRowDetails/Ch4Emissions didFacilityHaveGasFromProducedOil W W1926V3 The AtmosphericTanksDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails atmosphericTanksData W W1927V3 Sub-Basin ID. This data element is required if Missing data procedures were used for Onshore petroleum and natural gas production facilities. subBasinId W W1928V3 Parameter: For gas-liquid separator, non-separator equipment, or well with oil throughput >= 10 barrels/day using Calculation Methodology 1 or 2 [Table J.1]. This data element is required if Missing data procedures were used. calcMethod1Or2Parameters W W1929V3 Parameter: If separator dump valve is functioning improperly during the calendar year [Table J.3]. This data element is required if Missing data procedures were used. calcMethod3Parameters W W1930V3 Measurement frequency for parameter for which missing data procedures were used. This data element is required if Missing data procedures were used. missingFrequency W W1931V3 Number of quarters for which missing data procedures were used. This data element is required if the measurement frequency is "quarterly" for the parameter for which missing data procedures were used. missingQuarters W W1932V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used and the normal measurement frequency is quarterly. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksMissingDataProcUsedDetails/AtmosphericTanksMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W1933V3 Total number of hours for which missing data procedures were used [98.3(c)(8)] and [98.236(bb)(2)]. This data element is required if the measurement frequency for the parameter for which missing data procedures were used is more frequent than annually (except if the frequency is quarterly). missingHours W W1934V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksMissingDataProcUsedDetails/AtmosphericTanksMissingDataProcUsedRowDetails/MissingHours missingHours W W1935V3 Missing data procedures that were used. This data element is required if Missing data procedures were used. missingProceduresUsed W W1939V3 Missing Data Procedures Table. Data is required. table8Data[1] W W1946V3 Offshore Production Table. Data is required. offshoreProductionTableData[1] W W1947V3 Natural Gas Processing Table. Data is required. naturalGasProcessingTableData[1] W W1948V3 Natural Gas Transmission Compression Table. Data is required. naturalGasTransmissionTableData[1] W W1949V3 Underground Natural Gas Storage Table. Data is required. undergroundNaturalGasTableData[1] W W1950V3 LNG Import/Export Equipment Table. Data is required. lngImportExportEquipmentTableData[1] W W1951V3 LNG Storage Table. Data is required. lngStorageTableData[1] W W1952V3 Natural Gas Distribution Table. Data is required. naturalGasDistributionTableData[1] W W1954V3 The sum of CH4 emissions from all Pneumatic Pumps did not equal the reported Pneumatic Pumps CH4 emission roll-up total. Please check your Pneumatic Pumps roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksDelayedDataDetails/AtmosphericTanksDelayedDataRowDetails/TotalVolumeOfOilSales totalCh4MetricTonsEmissions W W1955V3 The sum of CO2 emissions from all Pneumatic Pumps did not equal the reported Pneumatic Pumps CO2 emission roll-up total. Please check your Pneumatic Pumps roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksDelayedDataDetails/AtmosphericTanksDelayedDataRowDetails/TotalVolumeOfOilSales totalCo2Emissions W W1957V3 Calculation Methodology 1 Table. Data is required. transientData['isTable2HasData'] W W1958V3 Calculation Methodology 2 Table. Data is required. transientData['isTable3HasData'] W W1959V3 Calculation Methodology 3 Table. Data is required. transientData['isTable4HasData'] W W1960V3 Calculation Methodology 4 Table. Data is required. transientData['isTable5HasData'] W W1970V3 The natural gas flow rates reported on an actual or standard basis for unit [{1}] was not reported. This data element is required. Please review your report and provide the identified value(s), as necessary. annualVolumeVentReportBasis W W1972V3 The annual volume of gas vented reported on an actual or standard basis for [{1}] was not reported. This data element is required. Please review your report and provide the identified value(s), as necessary. annualVolumeVentReportBasis W W2000V3 CO2 Emissions [98.236(e)]. The sum of CO2 emissions from all Dehydrators did not equal the reported Dehydrators CO2 emission roll-up total. Please check your Dehydrators roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksDelayedDataDetails/AtmosphericTanksDelayedDataRowDetails/TotalVolumeOfOilSales totalCo2Emissions W W2001V3 CH4 Emissions [98.236(e)]. The sum of CH4 emissions from all Dehydrators did not equal the reported Dehydrators CH4 emission roll-up total. Please check your Dehydrators roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksDelayedDataDetails/AtmosphericTanksDelayedDataRowDetails/TotalVolumeOfOilSales totalCh4Emissions W W2002V3 N2O Emissions [98.236(e)]. The sum of N2O emissions from all Dehydrators did not equal the reported Dehydrators N2O emission roll-up total. Please check your Dehydrators roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/AtmosphericTanksDelayedDataDetails/AtmosphericTanksDelayedDataRowDetails/TotalVolumeOfOilSales totalN2oEmissions W W2003V3 Does the Facility have any glycol dehydrators with annual average daily natural gas throughputs less than 0.4MMscfd subject to reporting under 98.232? [98.236(e)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorLowThroughput glycolDehydratorLowThroughput W W2004V3 Does the Facility have any desiccant dehydrators subject to reporting under 98.232? [98.236(e)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DoesFacilityHaveDesiccantDehydrators doesFacilityHaveDesiccantDehydrators W W2005V3 Does the Facility have any glycol dehydrators with annual average daily natural gas throughputs greater than OR equal to 0.4MMscfd subject to reporting under 98.232? [98.236(e)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorHighThroughput glycolDehydratorHighThroughput W W2006V3 Were missing data procedures used for any parameters to calculate GHG emissions? [98.235]. This data element is required. missingDataProceduresUsed W W2007V3 Count of small glycol dehydrators (W-5) [98.236(e)(2)(i)]. You indicated that this facility operates small glycol dehydrators that are subject to reporting. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorHighThroughput glycolDehydratorCount W W2008V3 Count of small glycol dehydrators (W-5) [98.236(e)(2)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorCount glycolDehydratorCount W W2009V3 Do any small glycol dehydrators vent to vapor recovery? [98.236(e)(2)(ii)]. You indicated that this facility operates small glycol dehydrators that are subject to reporting. This data element is required. vaporRecoveryUsedVentControl W W2010V3 Count of small glycol dehydrators that vent to vapor recovery [98.236(e)(2)(ii)]. You indicated that this facility operates small glycol dehydrators that are subject to reporting and that vent to vapor recovery. This data element is required. vaporRecoveryDehydratorCount W W2011V3 Count of small glycol dehydrators that vent to vapor recovery [98.236(e)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/VaporRecoveryDehydratorCount vaporRecoveryDehydratorCount W W2012V3 Do any small glycol dehydrators vent to flares OR regenerator firebox/fire tubes? [98.236(e)(2)(iv)]. You indicated that this facility operates small glycol dehydrators that are subject to reporting. This data element is required. smallDehydratorVentToFlares W W2013V3 Count of small glycol dehydrators vent to flares OR regenerator firebox/fire tubes [98.236(e)(2)(iv)(A)]. You indicated that this facility operates small glycol dehydrators that are subject to reporting and that vent to flares OR firebox/fire tubes. This data element is required. smallDehydratorVentToFlaresCount W W2014V3 Count of small glycol dehydrators that vent to flares or regenerator firebox/fire tubes [98.236(e)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/SmallDehydratorVentToFlaresCount smallDehydratorVentToFlaresCount W W2015V3 Do any small glycol dehydrators vent to control devices other than vapor recovery, flare OR regenerator firebox/fire tubes? [98.236(e)(2)(iii)]. This data element is required. controlDevicesVentControl W W2016V3 Total CO2 Emissions from flare or regenerator firebox/fire tubes for small glycol dehydrators (mt CO2) [98.236(e)(2)(iv)(B)]. You selected "Yes" for "dehydrator vents to flares or regenerator firebox/fire tubes". This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointVentedToFlareCO2Emissions emissionPointVentedToFlareCO2Emissions W W2017V3 Total CO2 Emissions from flare or regenerator firebox/fire tubes for small glycol dehydrators (mt CO2) [98.236(e)(2)(iv)(B)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointVentedToFlareCO2Emissions emissionPointVentedToFlareCO2Emissions W W2018V3 Total CH4 Emissions from flare or regenerator firebox/fire tubes for small glycol dehydrators (mt CH4) [98.236(e)(2)(iv)(C)]. You selected "Yes" for "dehydrator vents to flares or regenerator firebox/fire tubes". This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointVentedToFlareCH4Emissions emissionPointVentedToFlareCH4Emissions W W2019V3 Total CH4 Emissions from flare or regenerator firebox/fire tubes for small glycol dehydrators (mt CH4) [98.236(e)(2)(iv)(C)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointVentedToFlareCH4Emissions emissionPointVentedToFlareCH4Emissions W W2020V3 Total N2O Emissions from flare or regenerator firebox/fire tubes for small glycol dehydrators (mt N2O) [98.236(e)(2)(iv)(D)]. You selected "Yes" for "dehydrator vents to flares or regenerator firebox/fire tubes". This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointVentedToFlareN2OEmissions emissionPointVentedToFlareN2OEmissions W W2021V3 Total N2O Emissions from flare or regenerator firebox/fire tubes for small glycol dehydrators (mt N2O) [98.236(e)(2)(iv)(D)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointVentedToFlareN2OEmissions emissionPointVentedToFlareN2OEmissions W W2022V3 Total CO2 Emissions from small glycol dehydrators NOT vented to flare or regenerator firebox/fire tubes (mt CO2) [98.236(e)(2)(v)(A)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointNotVentedToFlareCO2Emissions emissionPointNotVentedToFlareCO2Emissions W W2023V3 Total CO2 Emissions from small glycol dehydrators NOT vented to flare or regenerator firebox/fire tubes (mt CO2) [98.236(e)(2)(v)(A)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointNotVentedToFlareCO2Emissions emissionPointNotVentedToFlareCO2Emissions W W2024V3 Total CH4 Emissions from small glycol dehydrators NOT vented to flare or regenerator firebox/fire tubes (mt CH4) [98.236(e)(2)(v)(B)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointNotVentedToFlareCH4Emissions emissionPointNotVentedToFlareCH4Emissions W W2025V3 Total CH4 Emissions from small glycol dehydrators NOT vented to flare or regenerator firebox/fire tubes (mt CH4) [98.236(e)(2)(v)(B)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/EmissionPointNotVentedToFlareCH4Emissions emissionPointNotVentedToFlareCH4Emissions W W2026V3 Total number of Desiccant Dehydrators [98.236(e)(3)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantDehydratorCount desiccantDehydratorCount W W2027V3 Do any desiccant dehydrators vent to vapor recovery? [98.236(e)(3)(i)]. You indicated that this facility operates desiccant dehydrators that are subject to reporting. This data element is required. desiccantvaporRecoveryUsedVentControl W W2028V3 Count of desiccant dehydrators that vent to vapor recovery [98.236(e)(3)(i)]. You indicated that this facility operates desiccant dehydrators that are subject to reporting and that vent to vapor recovery. This data element is required. desiccantvaporRecoveryDehydratorCount W W2029V3 Count of desiccant dehydrators that vent to vapor recovery [98.236(e)(3)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantvaporRecoveryDehydratorCount desiccantvaporRecoveryDehydratorCount W W2030V3 Do any desiccant dehydrators vent to flare OR regenerator firebox/fire tubes? [98.236(e)(3)(i)]. You indicated that this facility operates desiccant dehydrators that are subject to reporting. This data element is required. desiccantDehydratorVentToFlares W W2031V3 Count of desiccant dehydrators that vent to flare or regenerator firebox/fire tubes [98.236(e)(3)(i)]. You indicated that this facility operates desiccant dehydrators that vent to flare or regenerator firebox/fire tubes. This data element is required. desiccantDehydratorVentToFlaresCount W W2032V3 Count of desiccant dehydrators that vent to flare or regenerator firebox/fire tubes [98.236(e)(3)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantDehydratorVentToFlaresCount desiccantDehydratorVentToFlaresCount W W2033V3 Total CO2 Emissions from flare or regenerator firebox/fire tubes for desiccant dehydrators (mt CO2) [98.236(e)(3)(i)]. You selected "Yes" for "dehydrator vents to flares or regenerator firebox/fire tubes". This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointVentedToFlareCO2Emissions desiccantemissionPointVentedToFlareCO2Emissions W W2034V3 Total CO2 Emissions from flare or regenerator firebox/fire tubes for desiccant dehydrators (mt CO2) [98.236(e)(3)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointVentedToFlareCO2Emissions desiccantemissionPointVentedToFlareCO2Emissions W W2035V3 Total CH4 Emissions from flare or regenerator firebox/fire tubes for desiccant dehydrators (mt CH4) [98.236(e)(3)(i)]. You selected "Yes" for "dehydrator vents to flares or regenerator firebox/fire tubes". This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointVentedToFlareCH4Emissions desiccantemissionPointVentedToFlareCH4Emissions W W2036V3 Total CH4 Emissions from flare or regenerator firebox/fire tubes for desiccant dehydrators (mt CH4) [98.236(e)(3)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointVentedToFlareCH4Emissions desiccantemissionPointVentedToFlareCH4Emissions W W2037V3 Total N2O Emissions from flare or regenerator firebox/fire tubes for desiccant dehydrators (mt N2O) [98.236(e)(3)(i)]. You selected "Yes" for "dehydrator vents to flares or regenerator firebox/fire tubes". This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointVentedToFlareN2OEmissions desiccantemissionPointVentedToFlareN2OEmissions W W2038V3 Total N2O Emissions from flare or regenerator firebox/fire tubes for desiccant dehydrators (mt N2O) [98.236(e)(3)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointVentedToFlareN2OEmissions desiccantemissionPointVentedToFlareN2OEmissions W W2039V3 Total CO2 Emissions from desiccant dehydrators NOT vented to flare or regenerator firebox/fire tubes (mt CO2) [98.236(e)(3)(ii)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointNotVentedToFlareCO2Emissions desiccantemissionPointNotVentedToFlareCO2Emissions W W2040V3 Total CO2 Emissions from desiccant dehydrators NOT vented to flare or regenerator firebox/fire tubes (mt CO2) [98.236(e)(3)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointNotVentedToFlareCO2Emissions desiccantemissionPointNotVentedToFlareCO2Emissions W W2041V3 Total CH4 Emissions from desiccant dehydrators NOT vented to flare or regenerator firebox/fire tubes (mt CH4) [98.236(e)(3)(iii)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointNotVentedToFlareCH4Emissions desiccantemissionPointNotVentedToFlareCH4Emissions W W2042V3 Total CH4 Emissions from desiccant dehydrators NOT vented to flare or regenerator firebox/fire tubes (mt CH4) [98.236(e)(3)(iii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantemissionPointNotVentedToFlareCH4Emissions desiccantemissionPointNotVentedToFlareCH4Emissions W W2043V3 Do any desiccant dehydrators vent to control devices that are not vapor recovery OR flares OR regenerator firebox/fire tubes? [98.236(e)(3)(i)]. You indicated that this facility operates desiccant dehydrators that are subject to reporting. This data element is required. desiccantcontrolDevicesVentControl W W2044V3 Unit ID [98.236(e)(1)(i)]. You indicated that this facility has large dehydrators subject to reporting. This data element is required. unitIdentifier W W2045V3 Sub-basin ID [98.236(e)(1)(xviii)]. This data element is required for facilities in the Onshore Petroleum and Natural Gas Production industry. subBasinId W W2046V3 Glycol dehydrator feed natural gas flow rate in MMscfd, determined by engineering estimate based on best available data [98.236(e)(1)(ii)]. This data element is required. naturalGasFlowRate W W2047V3 Glycol dehydrator feed natural gas flow rate in MMscfd, determined by engineering estimate based on best available data 98.236(e)(1)(ii). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/NaturalGasFlowRate naturalGasFlowRate W W2048V3 Dehydrator feed natural gas water content [98.236(e)(1)(iii)]. This data element is required. feedNaturalGasWaterContent W W2049V3 Dehydrator feed natural gas water content [98.236(e)(1)(iii)]. You must enter a value that is greater than OR equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/FeedNaturalGasWaterContent feedNaturalGasWaterContent W W2050V3 Dehydrator outlet natural gas water content [98.236(e)(1)(iv)]. This data element is required. outletNaturalGasWaterContent W W2051V3 Dehydrator outlet natural gas water content [98.236(e)(1)(iv)]. You must enter a value that is greater than OR equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/OutletNaturalGasWaterContent outletNaturalGasWaterContent W W2052V3 Glycol dehydrator absorbent circulation pump type [98.236(e)(1)(v)]. You indicated that this facility operates large glycol dehydrators. This data element is required. absorbentCirculationPumpType W W2053V3 Absorbent circulation rate [98.236(e)(1)(vi)]. You indicated that this facility operates large glycol dehydrators. This data element is required. absorbentCirculationRate W W2054V3 Absorbent circulation rate [98.236(e)(1)(vi)]. You must enter a value that is greater than OR equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/AbsorbentCirculationRate absorbentCirculationRate W W2055V3 Report type of absorbent [98.236(e)(1)(vii)]. You indicated that this facility operates large glycol dehydrators. This data element is required. absorbentType W W2056V3 Report whether stripper gas is used in glycol dehydrator [98.236(e)(1)(viii)]. You indicated that this facility operates large glycol dehydrators. This data element is required. isStripperGasUsed W W2057V3 Report whether a flash tank separator is used in glycol dehydrator [98.236(e)(1)(ix)]. You indicated that this facility operates large glycol dehydrators. This data element is required. isFlashTankSeparatorUsed W W2058V3 Total time the glycol dehydrator is operating in hours [98.236(e)(1)(x)]. You indicated that this facility operates large glycol dehydrators. This data element is required. glycolDehydratorOperatingHours W W2059V3 Total time the glycol dehydrator is operating in hours [98.236(e)(1)(x)]. You indicated that this facility operates large glycol dehydrators. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/GlycolDehydratorOperatingHours glycolDehydratorOperatingHours W W2060V3 Temperature of the wet natural gas (deg F) [98.236(e)(1)(xi)]. You indicated that this facility operates large glycol dehydrators. This data element is required. wetNaturalGasTemperature W W2061V3 Temperature of the wet natural gas (deg F) [98.236(e)(1)(xi)]. You indicated that this facility operates large glycol dehydrators. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/WetNaturalGasTemperature wetNaturalGasTemperature W W2062V3 Pressure of the wet natural gas (psig) [98.236(e)(1)(xii)]. You indicated that this facility operates large glycol dehydrators. This data element is required. wetNaturalGasPressure W W2063V3 Pressure of the wet natural gas (psig) [98.236(e)(1)(xii)]. You indicated that this facility operates large glycol dehydrators. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/WetNaturalGasPressure wetNaturalGasPressure W W2064V3 Concentration of CO2 in wet natural gas (as a fraction) [98.236(e)(1)(xiv)]. You indicated that this facility operates large glycol dehydrators. This data element is required. wetNaturalGasCo2Concentration W W2065V3 Concentration of CO2 in wet natural gas (as a fraction) [98.236(e)(1)(xiv)]. You indicated that this facility operates large glycol dehydrators. You must enter a value from zero to 1. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/WetNaturalGasCarbonDioxideConcentration wetNaturalGasCo2Concentration W W2066V3 Concentration of CH4 in wet natural gas (as a fraction) [98.236(e)(1)(xiii)]. You indicated that this facility operates large glycol dehydrators. This data element is required. wetNaturalGasCh4Concentration W W2067V3 Concentration of CH4 in wet natural gas (as a fraction) [98.236(e)(1)(xiii)]. You indicated that this facility operates large glycol dehydrators. You must enter a value from zero to one. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/WetNaturalGasMethaneConcentration wetNaturalGasCh4Concentration W W2068V3 Report whether emissions were vented to vapor recovery [98.236(e)(1)(xv)]. You indicated that this facility operates large glycol dehydrators. This data element is required. dehydratorEmissionsVentedVaporRecovery W W2069V3 Report whether emissions were vented to flare OR regenerator firebox/fire tubes [98.236(e)(1)(xvi)]. You indicated that this facility operates large glycol dehydrators. This data element is required. dehydratorEmissionsVentedFlareOrTubes W W2070V3 CO2 Emissions from Flares OR Regenerators (mt CO2) [98.236(e)(1)(xvi)(A)]. You indicated this large dehydrator is vented to a flare OR regenerator. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W2071V3 CO2 Emissions from Flaring (mt CO2) [98.236(e)(1)(xvi)(A)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W2072V3 CH4 Emissions from Flare OR Regenerator (mt CH4) [98.236(e)(1)(xvi)(B)]. You indicated this large dehydrator is vented to a flare OR regenerator. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/FlaringCh4Emissions flaringCh4Emissions W W2073V3 CH4 Emissions from Flare or Regenerator (mt CH4) 98.236(e)(1)(xvi)(B)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/FlaringCh4Emissions flaringCh4Emissions W W2074V3 N2O Emissions from Flare OR Regenerator (mt N2O) [98.236(e)(1)(xvi)(C)}. You indicated this large dehydrator is vented to a flare OR regenerator. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/FlaringN2OEmissions flaringN2oEmissions W W2075V3 N2O Emissions from Flare or Regenerator (mt N2O) [98.236(e)(1)(xvi)(C)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/FlaringN2OEmissions flaringN2oEmissions W W2076V3 Report whether emissions were vented to atmosphere [98.236(e)(1)(xvii)]. You indicated that this facility operates large glycol dehydrators. This data element is required. dehydratorEmissionsVentedWithoutFlareOrTubes W W2077V3 CO2 Emissions from Venting (mt CO2) [98.236(e)(1)(xvii)(A)]. You indicated that this large dehydrator is vented to the atmosphere without being routed through a flare or regenerator firebox/fire tubes. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W2078V3 CO2 Emissions from Venting (mt CO2). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W2079V3 CH4 Emissions from Venting (mt CH4) [98.236(e)(1)(xvii)(B)]. You indicated that this large dehydrator is vented to the atmosphere without being routed through a flare or regenerator firebox/fire tubes. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/VentingCh4Emissions ventingCh4Emissions W W2080V3 CH4 Emissions from Venting (mt CH4). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/GlycolDehydratorsMoreThanSpecifiedValueDetails/GlycolDehydratorsMoreThanSpecifiedValueRowDetails/VentingCh4Emissions ventingCh4Emissions W W2081V3 Specify type of other control devices for small glycol dehydrators [98.236(e)(2)(iii)]. You selected "Yes" for "Control devices other than vapor recovery, flare OR regenerator firebox/fire tubes", but failed to provide any additional information in the sub-table. This data element is required. controlDeviceType W W2082V3 Count of small glycol dehydrators vent to control devices other than vapor recovery, flare OR regenerator firebox/fire tubes [98.236(e)(2)(iii)]. You indicated that there are other control devices (not vapor recovery OR flare/regenerator). This data element is required. otherVentControlDehydratorCount W W2083V3 Count of small glycol dehydrators that vent to control devices other than vapor recovery, flare or regenerator firebox/fire tubes. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/OtherVentControlsTypeAndCountDetails/OtherVentControlsTypeAndCountRowDetails/OtherVentControlDehydratorCount otherVentControlDehydratorCount W W2084V3 Specify type of other control devices for desiccant dehydrators [98.236(e)(2)(iii)]. You selected "Yes" for "Control devices other than vapor recovery, flare OR regenerator firebox/fire tubes", but failed to provide any additional information in the sub-table. This data element is required. controlDeviceType W W2085V3 Count of desiccant dehydrators that vent to control devices other than vapor recovery, flare OR regenerator firebox/fire tubes [98.236(e)(2)(iii)]. You indicated that this facility operates desiccant dehydrators that are subject to reporting and that vent to devices that are not vapor recovery OR regenerator firebox/fire tubes. This data element is required. otherVentControlDehydratorCount W W2086V3 Count of desiccant dehydrators that vent to control devices other than vapor recovery, flare or regenerator firebox/fire tubes. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DesiccantOtherVentControlsTypeAndCountDetails/DesiccantOtherVentControlsTypeAndCountRowDetails/OtherVentControlDehydratorCount otherVentControlDehydratorCount W W2087V3 Type of dehydrator for which missing data procedures were used. You indicated that missing data procedures were used. This data element is required. missingDehydratorType W W2088V3 Parameter for which missing data procedures were used. You indicated that missing data procedures were used. This data element is required. missingDataElements W W2089V3 Measurement frequency for parameter for which missing data procedures were used. You indicated that missing data procedures were used. This data element is required. missingFrequency W W2090V3 Number of quarters for which missing data procedures were used. This data element is required if the measurement frequency is "quarterly" for the parameter for which missing data procedures were used. missingQuarters W W2091V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DehydratorsMissingDataProcTypesDetails/DehydratorsMissingDataProcTypesRowDetails/MissingQuarters missingQuarters W W2092V3 Total number of hours for which missing data procedures were used [98.3(c)(8) and 98.236(bb)(2)]. This data element is required if the measurement frequency for the parameter for which missing data procedures were used is more frequent than annually (except if the frequency is quarterly). missingHours W W2093V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DehydratorsMissingDataProcTypesDetails/DehydratorsMissingDataProcTypesRowDetails/MissingHours missingHours W W2094V3 Missing data procedures that were used. This data element is required if missing data procedures were used. missingProceduresUsed W W2095V3 The County and State is not reported for this unit [98.236(e)(1)(xviii)]. This data element is required for each unit ID or name for this industry segment. countyAndState W W2101V3 Unit ID (For Large Dehydrators) for which missing data procedures were used. You indicated that missing data procedures were used for a large glycol dehydrator. This data element is required. unitIdentifier W W2103V3 Table E.1 Small Glycol Dehydrators. You selected "Yes" for "Control devices other than vapor recovery, flare OR regenerator firebox/fire tubes", but failed to provide any additional information in the sub-table. This data table is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DehydratorsMissingDataProcTypesDetails/DehydratorsMissingDataProcTypesRowDetails/MissingHours table4Data W W2104V3 Table E.2 Desiccant Dehydrators. You selected "Yes" for "Control devices other than vapor recovery, flare OR regenerator firebox/fire tubes", but failed to provide any additional information in the sub-table. This data table is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DehydratorsMissingDataProcTypesDetails/DehydratorsMissingDataProcTypesRowDetails/MissingHours table6Data W W2105V3 Table E.3 Large Glycol Dehydrators. You indicated that this facility has large dehydrators subject to reporting. This data table is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DehydratorsMissingDataProcTypesDetails/DehydratorsMissingDataProcTypesRowDetails/MissingHours table3Data W W2106V3 Table E.4 Missing data procedures used for Dehydrator emission calculations. You indicated that missing data procedures were used. This data table is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/DehydratorsDetails/DehydratorsMissingDataProcTypesDetails/DehydratorsMissingDataProcTypesRowDetails/MissingHours table5Data W W2500V3 The WellVentingDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails wellVentingData W W2501V3 Did the facility have any well venting for liquids unloading? [98.263(f)]. This data element is required for this industry segment. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/DidFacilityHaveWellVenting didFacilityHaveWellVenting W W2504V3 Were missing data procedures used for any parameters to calculate GHG emissions? This data element is required. missingDataProceduresUsed W W2505V3 Was Calculation Methodology 1 used? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WasMethod1UsedforCO2Emissions wasMethod1UsedforCO2Emissions W W2506V3 Was Calculation Methodology 2 used? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WasMethod2UsedforCO2Emissions wasMethod2UsedforCO2Emissions W W2507V3 Was Calculation Methodology 3 used? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WasMethod3UsedforCO2Emissions wasMethod3UsedforCO2Emissions W W2511V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingMissingDataProcUsedDetails/WellVentingMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W2513V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingMissingDataProcUsedDetails/WellVentingMissingDataProcUsedRowDetails/MissingHours missingHours W W2519V3 Tubing Diameter Group/Pressure Group [98.236(f)(1)(ii)]. This data element is required. tubingDiameterAndPressure W W2520V3 Number of Wells vented for liquids unloading [98.236(f)(1)(iv)]. You indicated that Calculation Methodology 1 was used. This data element is required. numberOfWells W W2521V3 Number of Wells vented for liquids unloading. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/NumberOfWells numberOfWells W W2522V3 Cumulative Number of Unloadings Vented [98.236(f)(1)(vii)]. You indicated that Calculation Methodology 1 was used. This data element is required. numberOfUnloadingsVented W W2523V3 Cumulative Number of Unloadings Vented. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/NumberOfUnloadingsVented numberOfUnloadingsVented W W2524V3 Total CO2 Emissions [98.236(f)(1)(ix)]. You indicated that Calculation Methodology 1 was used. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/TotalCarbonDioxideEmissions totalCo2Emissions W W2525V3 Total CO2 Emissions. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/TotalCarbonDioxideEmissions totalCo2Emissions W W2526V3 Total CH4 Emissions [98.236(f)(1)(x)]. You indicated that Calculation Methodology 1 was used. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/TotalCh4Emissions totalCh4Emissions W W2527V3 Total CH4 Emissions. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/TotalCh4Emissions totalCh4Emissions W W2529V3 Sub-basin ID [98.236(f)(1)(i)]. You indicated that Calculation Methodology 1 was used. This data element is required. subBasinIdentifier W W2530V3 Were plunger lifts used [98.236(f)(1)(iii)]? You indicated that Calculation Methodology 1 was used. This data element is required. plungerLiftsUsed W W2531V3 Percentage of wells for which the monitoring period used to determine the cumulative amount of time venting was not the full calendar year [98.236(f)(1)(v)]. You indicated that Calculation Methodology 1 was used. This data element is required. percentageOfWellsNotFullCalendarYearMonitoring W W2532V3 Percentage of wells for which the monitoring period used to determine the cumulative amount of time venting was not the full calendar year. You must enter a value between 0 and 100. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/PercentageOfWellsNotFullCalendarYearMonitoring percentageOfWellsNotFullCalendarYearMonitoring W W2533V3 Cumulative amount of time wells were vented [98.236(f)(1)(vi)]. You indicated that Calculation Methodology 1 was used. This data element is required. timeWellsVented W W2534V3 Cumulative amount of time wells were vented [98.236(f)(1)(vi)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/TimeWellsVented timeWellsVented W W2535V3 Annual natural gas emissions from well venting [98.236(f)(1)(viii)]. You indicated that Calculation Methodology 1 was used. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/AnnualNGEmissions annualNGEmissions W W2536V3 Annual natural gas emissions from well venting. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodOneDetails/WellVentingCalculationMethodOneRowDetails/AnnualNGEmissions annualNGEmissions W W2554V3 Number of Wells vented for liquids unloading [98.236(f)(2)(iv)]. This data element is required when Calculation Methods 2 OR 3 were used. numberOfWellsVented W W2555V3 Number of Wells vented for liquids unloading. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodTwoAndThreeDetails/WellVentingCalculationMethodTwoAndThreeRowDetails/NumberOfWellsVented numberOfWellsVented W W2556V3 Average internal casing diameter [98.236(f)(2)(ix)]. This data element is required if Calculation Method 2 was used. averageInternalCasingDiameter W W2557V3 Average internal casing diameter. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodTwoAndThreeDetails/WellVentingCalculationMethodTwoAndThreeRowDetails/AverageInternalCasingDiameter averageInternalCasingDiameter W W2558V3 Total CO2 Emissions [98.236(f)(2)(vii)]. This data element is required when Calculation Methods 2 OR 3 were used. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodTwoAndThreeDetails/WellVentingCalculationMethodTwoAndThreeRowDetails/TotalCarbonDioxideEmissions totalCo2Emissions W W2559V3 Total CO2 Emissions. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodTwoAndThreeDetails/WellVentingCalculationMethodTwoAndThreeRowDetails/TotalCarbonDioxideEmissions totalCo2Emissions W W2560V3 Total CH4 Emissions [98.236(f)(2)(viii)]. This data element is required when Calculation Methods 2 OR 3 were used. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodTwoAndThreeDetails/WellVentingCalculationMethodTwoAndThreeRowDetails/TotalCh4Emissions totalCh4Emissions W W2561V3 Total CH4 Emissions. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodTwoAndThreeDetails/WellVentingCalculationMethodTwoAndThreeRowDetails/TotalCh4Emissions totalCh4Emissions W W2562V3 Average internal tubing diameter [98.236(f)(2)(x)]. This data element is required if Calculation Method 3 was used. averageInternalTubingDiameter W W2563V3 Average internal tubing diameter. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodThreeDetails/WellVentingCalculationMethodThreeRowDetails/AverageInternalTubingDiameter averageInternalTubingDiameter W W2565V3 Sub-basin ID [98.236(f)(2)(i)]. This data element is required when Calculation Methods 2 or 3 were used. subBasinIdentifier W W2567V3 Specify whether Calculation Method 2 OR 3 was used for this sub-basin [98.236(f)(2)(ii)]. This data element is required. calculationMethodology W W2568V3 Cumulative number of unloadings vented to atmosphere [98.236(f)(2)(v)]. This data element is required when Calculation Methods 2 OR 3 were used. cumulativeNumberOfUnloadingsVented W W2569V3 Cumulative number of unloadings vented to atmosphere. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodThreeDetails/WellVentingCalculationMethodThreeRowDetails/CumulativeNumberOfUnloadingsVented cumulativeNumberOfUnloadingsVented W W2570V3 Annual natural gas emissions from well venting for liquids unloading [98.236(f)(2)(vi)]. This data element is required when Calculation Methods 2 OR 3 were used. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodTwoAndThreeDetails/WellVentingCalculationMethodTwoAndThreeRowDetails/NaturalGasWellVentingEmissions naturalGasWellVentingEmissions W W2571V3 Annual natural gas emissions from well venting. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellVentingDetails/WellVentingCalculationMethodTwoAndThreeDetails/WellVentingCalculationMethodTwoAndThreeRowDetails/NaturalGasWellVentingEmissions naturalGasWellVentingEmissions W W2800V3 You indicated "yes" in response to the question "If Calculation Method 1 or 2 were used, were any atmospheric tanks observed to have malfunctioning dump valves during the calendar year?" You indicated "no" in response to "Was Calculation Method 1 used to calculate emissions?" and "Was Calculation Method 2 used to calculate emissions?" Emissions from improperly functioning dump valves is not required unless you use either of these methods. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AtmosphericTanksDetails/MalfunctioningDumpValves malfunctioningDumpValves W W2803V3 County and State [98.236(j)(1)(i)]. You are in the Onshore petroleum and natural gas gathering and boosting industry segment and reported using Calculation Method 1 or 2. This data element is required. countyAndState W W2806V3 County and State [98.236(j)(2)(ii)(A)]. You reported using Calculation Method 3 and that your fraction of oil/condensate throughput sent to tanks with flaring is less than 1.0. This data element is required for Onshore petroleum and natural gas gathering and boosting facilities. countyAndState W W2807V3 County and State [98.236(j)(2)(iii)(A)]. You reported using Calculation Method 3 and that your fraction of oil/condensate throughput sent to tanks with flaring is greater than 0. This data element is required for Onshore petroleum and natural gas gathering and boosting facilities. countyAndState W W2808V3 County and State [98.236(j)(3)]. You reported improperly functioning gas-liquid separator dump valves. This data element is required for Onshore petroleum and natural gas gathering and boosting facilities. countyAndState W W2809V3 County and State. This data element is required if Missing data procedures were used for Onshore petroleum and natural gas gathering and boosting facilities. countyAndState W W3000V3 Did the facility have any gas well completions or workovers with hydraulic fracturing subject to reporting under 98.232 [98.236(g)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/DidFacilityHaveCompletionsWithHydraulic didFacilityHaveCompletionsWithHydraulic W W3001V3 You indicated that the facility had gas well completions or workovers with hydraulic fracturing subject to reporting under 98.232 [98.236(g)]. You must complete Tables G.1 and/or Table G.2. At least one of these tables will be applicable and are required. didFacilityHaveCompletionsWithHydraulic W W3002V3 Did the facility have any gas well completions or workovers without hydraulic fracturing subject to reporting under 98.232 [98.236(h)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/DidFacilityHaveCompletionsWithoutHydraulic didFacilityHaveCompletionsWithoutHydraulic W W3003V3 You indicated that the facility had gas well completions or workovers without hydraulic fracturing subject to reporting under 98.232 [98.236(h)]. You must complete Tables H.1, Table H.2 and/or Table H.3, as applicable. At least one of these tables will be applicable and are required. didFacilityHaveCompletionsWithoutHydraulic W W3006V3 Were missing data procedures used for any parameters to calculate GHG emissions? [98.235]. This data element is required. missingDataProceduresUsed W W3009V3 Well Type [98.236(g)(2)]. You entered a sub-basin ID for this row. This data element is required. wellType W W3010V3 Is gas flared? [98.236(g)(2)]. You entered a sub-basin ID for this row. This data element is required. isGasFlared W W3011V3 Reduced Emission Completions? [98.236(g)(2)]. You entered a sub-basin ID for this row. This data element is required. reducedEmissionCompletions W W3012V3 Total count of completions in the calendar year, W [98.236(g)(3)]. You entered a sub-basin ID for this row. This data element is required. totalCompletions W W3013V3 Total count of completions in the calendar year, W [98.236(g)(3)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/TotalCompletions totalCompletions W W3014V3 Equation Used [98.236(g)(4)]. You entered a sub-basin ID for this row. This data element is required. equationUsed W W3015V3 Are the only wells in the sub-basin used to calculate "cumulative gas flowback time" wildcat or delineation wells subject to a 2-year delay in reporting? [98.236(g)(5)(i)] [98.236(g)(5)(ii)]. You indicated that Eq. W-10A was used for this sub-basin. This data is element is required. twoYearDelayIndicator W W3016V3 Cumulative gas flowback time from all wells during completions from when gas is first detected until sufficient quantities are present to enable separation, Sum of Tp,i values (hours) [98.236(g)(5)(i)]. You indicated that a two year delay is not claimed for this sub-basin. This data element is required. flowBackHoursBeforeSufficient W W3017V3 Cumulative gas flowback time from all wells during completions from when gas is first detected until sufficient quantities are present to enable separation, Sum of Tp,i values (hours) [98.236(g)(5)(i)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/FlowBackHoursBeforeSufficient flowBackHoursBeforeSufficient W W3018V3 Cumulative gas flowback time from all wells during completions after sufficient quantities of gas are present to enable separation, Sum of Tp,s values (hours) [98.236(g)(5)(i)]. You indicated that a two year delay is not being claimed for this sub-basin. This data element is required. flowBackHoursAfterSufficient W W3019V3 Cumulative gas flowback time from all wells during completions after sufficient quantities of gas are present to enable separation, Sum of Tp,s values (hours) [98.236(g)(5)(i)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/FlowBackHoursAfterSufficient flowBackHoursAfterSufficient W W3026V3 Annual gas emissions, Es,n (standard cubic feet) [98.236(g)(7)]. This data element is required for this sub-basin ID. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/AnnualGasEmissions annualGasEmissions W W3027V3 Annual gas emissions, Es,n(standard cubic feet) [98.236(g)(7)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/AnnualGasEmissions annualGasEmissions W W3028V3 Annual total CO2 emissions (mt CO2) [98.236(g)(8)]. This data element is required for this sub-basin ID. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/AnnualCo2Emissions annualCo2Emissions W W3029V3 Annual total CO2 emissions(mt CO2) [98.236(g)(8)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/AnnualCo2Emissions annualCo2Emissions W W3030V3 Annual total CH4 emissions (mt CH4) [98.236(g)(9)]. This data element is required for this sub-basin ID. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/AnnualCh4Emissions annualCh4Emissions W W3031V3 Annual total CH4 emissions (mt CH4) [98.236(g)(9)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/AnnualCh4Emissions annualCh4Emissions W W3032V3 Annual total N2O emissions (mt N2O) [98.236(g)(10)]. You indicated that the gas is flared for these wells. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/AnnualN2OEmissions annualN2oEmissions W W3033V3 Annual total N2O emissions (mt N2O) [98.236(g)(10)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithHydraulicFracturingDetails/WellCompletionsWithHydraulicFracturingRowDetails/AnnualN2OEmissions annualN2oEmissions W W3036V3 Well Type [98.236(g)(2)]. This data element is required for this sub-basin ID. wellType W W3037V3 Is gas flared? [98.236(g)(2)]. This data element is required for this sub-basin ID. isGasFlared W W3038V3 Reduced Emission Workovers? [98.236(g)(2)]. This data element is required for this sub-basin ID. reducedEmissionWorkovers W W3039V3 Total count of workovers [98.236(g)(3)]. This data element is required for this sub-basin ID. totalWorkovers W W3040V3 Total count of workovers [98.236(g)(3)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/TotalWorkovers totalWorkovers W W3041V3 Equation Used [98.236(g)(4)]. This data element is required for this sub-basin ID. equationUsed W W3042V3 Are the only wells in the sub-basin used to calculate "cumulative gas flowback time" wildcat or delineation wells subject to a 2-year delay in reporting? [98.236(g)(5)(i)] [98.236(g)(5)(ii)] You indicated that Eq. W-10A was used for this sub-basin ID. This data is element is required. twoYearDelayIndicator W W3043V3 Cumulative gas flowback time from all wells during workovers from when gas is first detected until sufficient quantities are present to enable separation, Sum of Tp,i values (hours) [98.236(g)(5)(i)]. You indicated that the 2-yr delay has not been claimed for this sub-basin ID. This data element is required. backflowHoursBeforeSufficient W W3044V3 Cumulative gas flowback time from all wells during workovers from when gas is first detected until sufficient quantities are present to enable separation, Sum of Tp,i values (hours) [98.236(g)(5)(i)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/BackflowHoursBeforeSufficient backflowHoursBeforeSufficient W W3045V3 Cumulative gas flowback time from all wells during workovers after sufficient quantities of gas are present to enable separation, Sum of Tp,s values (hours) [98.236(g)(5)(i)]. You indicated that a 2 year delay is not being claimed for this sub-basin ID. This data element is required. backflowHoursAfterSufficient W W3046V3 Cumulative gas flowback time from all wells during workovers after sufficient quantities of gas are present to enable separation, Sum of Tp,s values (hours) [98.236(g)(5)(i)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/BackflowHoursAfterSufficient backflowHoursAfterSufficient W W3053V3 Annual gas emissions, Es,n (standard cubic feet) [98.236(g)(7)]. This data element is required for this sub-basin ID. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/AnnualGasEmissions annualGasEmissions W W3054V3 Annual gas emissions, Es,n(standard cubic feet) [98.236(g)(7)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/AnnualGasEmissions annualGasEmissions W W3055V3 Annual total CO2 emissions (mt CO2) [98.236(g)(8)]. This data element is required for this sub-basin ID. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/AnnualCo2Emissions annualCo2Emissions W W3056V3 Annual total CO2 emissions(mt CO2) [98.236(g)(8)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/AnnualCo2Emissions annualCo2Emissions W W3057V3 Annual total CH4 emissions (mt CH4) [98.236(g)(9)]. This data element is required for this sub-basin ID. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/AnnualCh4Emissions annualCh4Emissions W W3058V3 Annual total CH4 emissions (mt CH4) [98.236(g)(9)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/AnnualCh4Emissions annualCh4Emissions W W3059V3 Annual total N2O emissions (mt N2O) [98.236(g)(10)]. You indicated that gas is flared from these wells. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/AnnualN2OEmissions annualN2oEmissions W W3060V3 Annual total N2O emissions (mt N2O) [98.236(g)(10)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithHydraulicFracturingDetails/WellWorkoversWithHydraulicFracturingRowDetails/AnnualN2OEmissions annualN2oEmissions W W3063V3 Total count of completions that vented directly to atmosphere without flaring [98.236(h)(1)(ii)]. This data element is required for this sub-basin ID. totalCompletionsVentedWithoutFlaring W W3064V3 Total count of completions that vented directly to atmosphere without flaring [98.236(h)(1)(ii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringRowDetails/TotalCompletionsVentedWithoutFlaring totalCompletionsVentedWithoutFlaring W W3065V3 Total number of hours that gas vented directly to atmosphere, Sum of all Tp [98.236(h)(1)(iii)]. This data element is required for this sub-basin ID. totalHoursVentedWithoutFlaring W W3066V3 Total number of hours that gas vented directly to atmosphere, Sum of all Tp [98.236(h)(1)(iii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringRowDetails/TotalHoursVentedWithoutFlaring totalHoursVentedWithoutFlaring W W3067V3 Are the only wells in the sub-basin used to calculate "average daily gas production rate" wildcat or delineation wells subject to a 2-year delay in reporting? [98.236(h)(1)(iv)]. This data element is required for this sub-basin ID. twoYearDelayIndicator W W3068V3 Average daily gas production rate, Average of all Vp (standard cubic feet/hour) [98.236(h)(1)(iv)]. You indicated that a 2-year delay is not being claimed for this sub-basin. This data element is required. averageDailyGasProductionRate W W3069V3 Average daily gas production rate, Average of all Vp(standard cubic feet/hour)[98.236(h)(1)(iv)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringRowDetails/AverageDailyGasProductionRate averageDailyGasProductionRate W W3070V3 Annual total CO2 emissions that resulted from venting gas directly to the atmosphere for completions, Es,p (mt CO2) [98.236(h)(1)(v)]. This data element is required for this sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringRowDetails/AnnualCo2Emissions annualCo2Emissions W W3071V3 Annual total CO2 emissions that resulted from venting gas directly to the atmosphere for completions, Es,p(mt CO2) [98.236(h)(1)(v)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringRowDetails/AnnualCo2Emissions annualCo2Emissions W W3072V3 Annual total CH4 emissions that resulted from venting gas directly to the atmosphere for completions, Es,p (mt CH4) [98.236(h)(1)(vi)]. This data element is required for this sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringRowDetails/AnnualCh4Emissions annualCh4Emissions W W3073V3 Annual total CH4 emissions that resulted from venting gas directly to the atmosphere for completions, Es,p (mt CH4) [98.236(h)(1)(vi)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithoutFlaringRowDetails/AnnualCh4Emissions annualCh4Emissions W W3076V3 Total count of completions that flared gas [98.236(h)(2)(ii)]. This data element is required for this sub-basin. totalCompletionsVentedToFlare W W3077V3 Total count of completions that flared gas [98.236(h)(2)(ii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/TotalCompletionsVentedToFlare totalCompletionsVentedToFlare W W3078V3 Total Number of hours that gas vented to a flare, Sum of all Tp [98.236(h)(2)(iii)]. This data element is required for this sub-basin. totalHoursVentedToFlare W W3079V3 Total Number of hours that gas vented to a flare, Sum of all Tp [98.236(h)(2)(iii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/TotalHoursVentedToFlare totalHoursVentedToFlare W W3080V3 Are the only wells in the sub-basin used to calculate "average daily gas production rate" wildcat or delineation wells subject to a 2-year delay in reporting? [98.236(h)(2)(iv)]. This data element is required for this sub-basin. twoYearDelayIndicator W W3081V3 Average daily gas production rate, Average of all Vp (standard cubic feet/hour) [98.236(h)(2)(iv)]. You indicated that a two year delay is not being claimed for this sub-basin. This data element is required. averageDailyGasProductionRate W W3082V3 Average daily gas production rate, Average of all Vp(standard cubic feet/hour) [98.236(h)(2)(iv)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/AverageDailyGasProductionRate averageDailyGasProductionRate W W3083V3 Annual total CO2 emissions that resulted from flares for completions (mt CO2) [98.236(h)(2)(v)]. This data element is required for this sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/AnnualCo2Emissions annualCo2Emissions W W3084V3 Annual total CO2 emissions that resulted from flares for completions (mt CO2) [98.236(h)(2)(v)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/AnnualCo2Emissions annualCo2Emissions W W3085V3 Annual total CH4 emissions that resulted from flares for completions (mt CH4) [98.236(h)(2)(vi)]. This data element is required for this sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/AnnualCh4Emissions annualCh4Emissions W W3086V3 Annual total CH4 emissions that resulted from flares for completions (mt CH4) [98.236(h)(2)(vi)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/AnnualCh4Emissions annualCh4Emissions W W3087V3 Annual total N2O emissions that resulted from flares for completions (mt N2O) [98.236(h)(2)(vii)]. This data element is required for this sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/AnnualN2OEmissions annualN2oEmissions W W3088V3 Annual total N2O emissions that resulted from flares for completions (mt N2O) [98.236(h)(2)(vii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringDetails/WellCompletionsWithoutHydraulicFracturingWithFlaringRowDetails/AnnualN2OEmissions annualN2oEmissions W W3091V3 Did the facility have gas well workovers without flaring within each sub-basin category? [98.236(h)(3)] [98.236(h)(4)]. This data element is required for this sub-basin. workoversWithoutFlaring W W3092V3 Total count of workovers that vented directly to atmosphere without flaring [98.236(h)(3)(ii)]. You indicated that some gas from this sub-basin is not flared. This data element is required. totalWorkoversWithoutFlaring W W3093V3 Total count of workovers that vented directly to atmosphere without flaring [98.236(h)(3)(ii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/TotalWorkoversWithoutFlaring totalWorkoversWithoutFlaring W W3094V3 Annual total CO2 emissions that resulted from venting gas directly to the atmosphere for workovers, Es,wo (mt CO2) [98.236(h)(3)(iii)]. You indicated that some gas is not flared from this sub-basin. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualCo2EmissionsWithoutFlaring annualCo2EmissionsWithoutFlaring W W3095V3 Annual total CO2 emissions that resulted from venting gas directly to the atmosphere for workovers, Es,wo(mt CO2) [98.236(h)(3)(iii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualCo2EmissionsWithoutFlaring annualCo2EmissionsWithoutFlaring W W3096V3 Annual total CH4 emissions that resulted from venting gas directly to the atmosphere for workovers, Es,wo (mt CH4) [98.236(h)(3)(iv)]. You indicated that gas is not flared from these wells. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualCh4EmissionsWithoutFlaring annualCh4EmissionsWithoutFlaring W W3097V3 Annual total CH4 emissions that resulted from venting gas directly to the atmosphere for workovers, Es,wo (mt CH4) [98.236(h)(3)(iv)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualCh4EmissionsWithoutFlaring annualCh4EmissionsWithoutFlaring W W3098V3 Total count of workovers with flaring [98.236(h)(4)(ii)]. This data element is required for this sub-basin. totalWorkoversWithFlaring W W3099V3 Total count of workovers with flaring [98.236(h)(4)(ii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/TotalWorkoversWithFlaring totalWorkoversWithFlaring W W3100V3 Annual total CO2 emissions that resulted from flares for workovers (mt CO2) [98.236(h)(4)(iii)]. This data element is required for this sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualCo2EmissionsWithFlaring annualCo2EmissionsWithFlaring W W3101V3 Annual total CO2 emissions that resulted from flares for workovers (mt CO2) [98.236(h)(4)(iii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualCo2EmissionsWithFlaring annualCo2EmissionsWithFlaring W W3102V3 Annual total CH4 emissions that resulted from flares for workovers (mt CH4) [98.236(h)(4)(iv)]. This data element is required for this sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualCh4EmissionsWithFlaring annualCh4EmissionsWithFlaring W W3103V3 Annual total CH4 emissions that resulted from flares for workovers (mt CH4) [98.236(h)(4)(iv)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualCh4EmissionsWithFlaring annualCh4EmissionsWithFlaring W W3104V3 Annual total N2O emissions that resulted from flares for workovers (mt N2O) [98.236(h)(4)(v)]. This data element is required for this sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualN2OEmissionsWithFlaring annualN2oEmissionsWithFlaring W W3105V3 Annual total N2O emissions that resulted from flares for workovers (mt N2O) [98.236(h)(4)(v)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellCompletionsWorkoversDetails/WellWorkoversWithoutHydraulicFracturingDetails/WellWorkoversWithoutHydraulicFracturingRowDetails/AnnualN2OEmissionsWithFlaring annualN2oEmissionsWithFlaring W W3106V3 Were missing data procedures used for any parameters to calculate GHG emissions? [98.235] This data element is required. missingDataProceduresUsed W W3118V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellsWithoutFracturingDetails/MissingDataWellCompletionWorkOverEmissionTabhElementDetails/MissingDataWellCompletionWorkOverEmissionTabhElementRowDetails/NumOfQuartersMissingDataProcedures numOfQuartersMissingDataProcedures W W3120V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellsWithoutFracturingDetails/MissingDataWellCompletionWorkOverEmissionTabhElementDetails/MissingDataWellCompletionWorkOverEmissionTabhElementRowDetails/NumOfHoursMissingDataProcedures numOfHoursMissingDataProcedures W W3140V3 Oil or Gas Well [98.236(g)(2)]. You entered a sub-basin ID for this row. This data element is required. oilOrGasWell W W3141V3 Oil or Gas Well [98.236(g)(2)]. You entered a sub-basin ID for this row. This data element is required. oilOrGasWell W W3142V3 Oil or Gas Well [98.236(g)(2)]. You entered a sub-basin ID for this row. This data element is required. oilOrGasWell W W3148V3 Reduced Emission Completions or Workovers [98.236(g)(2)]. You identified a sub-basin ID for which missing data procedures were used. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellsWithFracturingDetails/MissingDataWellCompletionWorkOverEmissionTabgDetails/MissingDataWellCompletionWorkOverEmissionTabgRowDetails/ReducedEmissionWorkoversCompletions reducedEmissionWorkoversCompletions W W3153V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellsWithFracturingDetails/MissingDataWellCompletionWorkOverEmissionTabgDetails/MissingDataWellCompletionWorkOverEmissionTabgRowDetails/NumberOfQuarters numberOfQuarters W W3155V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellsWithFracturingDetails/MissingDataWellCompletionWorkOverEmissionTabgDetails/MissingDataWellCompletionWorkOverEmissionTabgRowDetails/TotalNumHours totalNumHours W W3500V3 Total number of blowdowns for equipment or event type, N. You indicated that blowdowns are being reported by equipment or event type. This data element is required. totalBlowdowns W W3501V3 Total number of blowdowns for equipment or event type, N. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownEquipmentOrEventEmissionsDetails/BlowdownEquipmentOrEventEmissionsRowDetails/TotalBlowdowns totalBlowdowns W W3502V3 Annual total CO2 emissions for each equipment or event type (mt CO2) [98.236(i)(1)(ii)]. You indicated that blowdowns are being reported by equipment or event type. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownEquipmentOrEventEmissionsDetails/BlowdownEquipmentOrEventEmissionsRowDetails/TotalCarbonDioxideEmissions totalCarbonDioxideEmissions W W3503V3 Annual total CO2 emissions for each equipment or event type (mt CO2) [98.236(i)(1)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownEquipmentOrEventEmissionsDetails/BlowdownEquipmentOrEventEmissionsRowDetails/TotalCarbonDioxideEmissions totalCarbonDioxideEmissions W W3504V3 Annual total CH4 emissions for each equipment or event type (mt CH4) [98.236(i)(1)(iii)]. You indicated that blowdowns are being reported by equipment or event type. This data element is required. totalCh4Emissions W W3505V3 Annual total CH4 emissions for each equipment or event type (mt CH4) [98.236(i)(1)(iii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownEquipmentOrEventEmissionsDetails/BlowdownEquipmentOrEventEmissionsRowDetails/TotalCh4Emissions totalCh4Emissions W W3506V3 Equipment or event type [98.236(i)(1)]. This data element is required. equipmentType W W3512V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownMissingDataProcUsedDetails/BlowdownMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W3514V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownMissingDataProcUsedDetails/BlowdownMissingDataProcUsedRowDetails/MissingHours missingHours W W3516V3 Were missing data procedures used for any parameters to calculate GHG emissions [98.235]? This data element is required. missingDataProceduresUsed W W3517V3 Does the facility have any blowdown vent stacks subject to reporting under 98.232 [98.236(i)]? This data element is required for Onshore natural gas processing, Onshore natural gas transmission compression, LNG import and export equipment, Onshore petroleum and natural gas gathering and boosting, and Onshore natural gas transmission pipeline facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/DoesFacilityHaveBlowdownVentStacks doesFacilityHaveBlowdownVentStacks W W3518V3 Annual total CO2 emissions calculated by flow meter (mt CO2) [98.236(i)(2)(i)]. You indicated blowdown emissions are calculated using flow meters. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownVentStacksEmissionsDetails/BlowdownVentStacksEmissionsRowDetails/FlowMeterTotalCO2Emissions flowMeterTotalCO2Emissions W W3519V3 Annual total CO2 emissions calculated by flow meter (mt CO2) [98.236(i)(2)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownVentStacksEmissionsDetails/BlowdownVentStacksEmissionsRowDetails/FlowMeterTotalCO2Emissions flowMeterTotalCO2Emissions W W3520V3 Annual total CH4 emissions calculated by flow meter (mt CH4) [98.236(i)(2)(ii)]. You indicated blowdown emissions are calculated using flow meters. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownVentStacksEmissionsDetails/BlowdownVentStacksEmissionsRowDetails/FlowMeterTotalCH4Emissions flowMeterTotalCH4Emissions W W3521V3 Annual total CH4 emissions calculated by flow meter (mt CH4) [98.236(i)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownVentStacksEmissionsDetails/BlowdownVentStacksEmissionsRowDetails/FlowMeterTotalCH4Emissions flowMeterTotalCH4Emissions W W3522V3 How were emissions determined [98.236(i)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/EmissionsType emissionsType W W3523V3 The BlowdownVentStacksDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails blowdownVentStacksData W W3527V3 Blowdown Vent Stacks Emissions Calculated Using Flow Meters Table. Data is required. table2Data[1] W W3528V3 Equipment or event type [98.236(i)(1)]. This data element is required. equipmentTypeForOnshoreNaturalGasTransmissionPipeline W W3531V3 Report the states through which the transmission pipelines go. This data element is required for facilities in the Natural gas transmission pipeline industry segment. usState W W3532V3 Report the annual CO2 emissions for each state through which the transmission pipelines go. This data element is required for each reported state. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3533V3 Report the annual CO2 emissions for each state through which the transmission pipelines go. This data element must be greater than or equal to 0. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3534V3 Report the annual CH4 emissions for each state through which the transmission pipelines go. This data element is required for each reported state. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCh4Emissions totalCh4Emissions W W3535V3 Report the annual CH4 emissions for each state through which the transmission pipelines go. This data element must be greater than or equal to 0. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCh4Emissions totalCh4Emissions W W3536V3 Report the annual number of blowdown events for each state through which the transmission pipelines go. This data element is required for each reported state. numberBlowdownEvents W W3537V3 Report the annual number of blowdown events for each state through which the transmission pipelines go. This data element must be greater than or equal to 0. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCh4Emissions numberBlowdownEvents W W3539V3 Report the states through which the transmission pipelines go. The reported state is invalid. Please review your data and make corrections if needed. usState W W3540V3 Blowdown Vent Stacks Emissions Calculated by Equipment or Event Type Table. Data is required. table1Data[1] W W3541V3 Onshore Natural Gas Transmission Pipeline Characterization Table. Data is required. onshrNatGasTransmPiplnCharzTable[1] W W3600V3 The total carbon dioxide emissions reported for Acid Gas Removal Units are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and AcidGasRemovalUnitsDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3601V3 The total methane emissions reported for AtmosphericTanks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and AtmosphericTanksDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3602V3 The total carbon dioxide emissions reported for AtmosphericTanks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and AtmosphericTanksDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3603V3 The total nitrous oxide emissions reported for AtmosphericTanks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and AtmosphericTanksDetails/TotalN2OMetricTonsEmission are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2OMetricTonsEmissions W W3604V3 The total methane emissions reported for Blowdown Vent Stacks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and BlowdownVentStacksDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3605V3 The total carbon dioxide emissions reported for Blowdown Vent Stacks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and BlowdownVentStacksDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3606V3 The total methane emissions reported for Centrifugal Compressors are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and CentrifugalCompressorsDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3607V3 The total carbon dioxide emissions reported for Centrifugal Compressors are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and CentrifugalCompressorsDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3608V3 The total methane emissions reported for Combustion Equipment are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and CombustionEmissionsDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3609V3 The total carbon dioxide emissions reported for Combustion Equipment are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and CombustionEmissionsDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3610V3 The total nitrous oxide emissions reported for Combustion Equipment are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and CombustionEmissionsDetails/TotalN2OMetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2OMetricTonsEmissions W W3611V3 The total methane emissions reported for Dehydrators are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and DehydratorsDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4Emissions W W3612V3 The total carbon dioxide emissions reported for Dehydrators are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and DehydratorsDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3613V3 The total nitrous oxide emissions reported for Dehydrators are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and DehydratorsDetails/TotalN2OMetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2oEmissions W W3614V3 The total carbon dioxide emissions reported for EOR Injection Pump Blowdowns are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and EnhancedOilRecoveryInjectionPumpBlowdownDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3615V3 The total carbon dioxide emissions reported for EOR Hydrocarbon Liquids are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3616V3 The total methane emissions reported for Equipment Leaks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and OtherEmissionsFromEquipmentLeaksDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3617V3 The total carbon dioxide emissions reported for Equipment Leaks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and OtherEmissionsFromEquipmentLeaksDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3618V3 The total methane emissions reported for Flare Stacks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and FlareStacksDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4Emissions W W3619V3 The total carbon dioxide emissions reported for Flare Stacks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and FlareStacksDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3620V3 The total nitrous oxide emissions reported for Flare Stacks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and FlareStacksDetails/TotalN2OMetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2oEmissions W W3621V3 The total methane emissions reported for Offshore Production Emission Sources are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and OffshoreEmissionsDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3622V3 The total carbon dioxide emissions reported for Offshore Production Emission Sources are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and OffshoreEmissionsDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3623V3 The total nitrous oxide emissions reported for Offshore Production Emission Sources are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and OffshoreEmissionsDetails/TotalN2OMetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2OMetricTonsEmissions W W3624V3 The total methane emissions reported for Pneumatic Devices are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and PneumaticDeviceVentingDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3625V3 The total carbon dioxide emissions reported for Pneumatic Devices are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and PneumaticDeviceVentingDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3626V3 The total methane emissions reported for Pneumatic Pumps are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and NaturalGasDrivenPneumaticPumpsDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3627V3 The total carbon dioxide emissions reported for Pneumatic Pumps are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and NaturalGasDrivenPneumaticPumpsDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3628V3 The total methane emissions reported for Reciprocating Compressors are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and ReciprocatingCompressorsDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3629V3 The total carbon dioxide emissions reported for Reciprocating Compressors are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and ReciprocatingCompressorsDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3630V3 The total carbon dioxide emissions reported for subpart W are not consistent within your annual report. The values reported in SubpartWReportingFormDetails/SubpartWSummaryDetails and GasInfoDetails/GHGasQuantity are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalReportedCo2Emissions W W3631V3 The total methane emissions reported for subpart W are not consistent within your annual report. The values reported in SubpartWReportingFormDetails/SubpartWSummaryDetails and GasInfoDetails/GHGasQuantity are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalReportedCh4Emissions W W3632V3 The total nitrous oxide emissions reported for subpart W are not consistent within your annual report. The values reported in SubpartWReportingFormDetails/SubpartWSummaryDetails and GasInfoDetails/GHGasQuantity are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalReportedN2OEmissions W W3633V3 The total carbon dioxide emissions reported for subpart W in GasInfoDetails/GHGasQuantity does not equal the sum of the source-level carbon dioxide emissions values reported in each TotalCarbonDioxideEmissions element within the \'RowDetails\' node for each source. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions transientData['calculatedSubpartLevelTotalCo2'] W W3634V3 The total methane emissions reported for subpart W in GasInfoDetails/GHGasQuantity does not equal the sum of the source-level methane emissions values reported in each TotalCh4MetricTonsEmissions element within the \'RowDetails\' node for each source. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions transientData['calculatedSubpartLevelTotalCh4'] W W3635V3 The total nitrous oxide emissions reported for subpart W in GasInfoDetails/GHGasQuantity does not equal the sum of the source-level nitrous oxide emissions values reported in each TotalN2OMetricTonsEmissions element within the \'RowDetails\' node for each source. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions transientData['calculatedSubpartLevelTotalN2o'] W W3636V3 The total CO2 equivalent emissions reported for subpart W in SubpartWSummaryDetails/TotalReportedCarbonDioxideEquivalent does not equal the sum of the total CO2, CH4, and N2O emissions values reported in GasInfoDetails/GHGasQuantity after conversion to CO2 equivalent. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalReportedCo2Equivalent W W3637V3 The total methane emissions reported for Transmission Tanks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and TransmissionTanksDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4Emissions W W3638V3 The total carbon dioxide emissions reported for Transmission Tanks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and TransmissionTanksDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3639V3 The total nitrous oxide emissions reported for Transmission Tanks are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and TransmissionTanksDetails/TotalN2OMetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2oEmissions W W3640V3 The total methane emissions reported for Associated Gas Venting and Flaring are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and AssociatedGasVentingFlaringDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4Emissions W W3641V3 The total carbon dioxide emissions reported for Associated Gas Venting and Flaring are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and AssociatedGasVentingFlaringDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3642V3 The total nitrous oxide emissions reported for Associated Gas Venting and Flaring are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and AssociatedGasVentingFlaringDetails/TotalN2OMetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2oEmissions W W3643V3 The total methane emissions reported for Well Testing Venting and Flaring are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and WellTestingDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3644V3 The total carbon dioxide emissions reported for Well Testing Venting and Flaring are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and WellTestingDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3645V3 The total methane emissions reported for Well Venting for Liquids Unloading are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and WellVentingDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4MetricTonsEmissions W W3646V3 The total carbon dioxide emissions reported for Well Venting for Liquids Unloading are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and WellVentingDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3647V3 The total methane emissions reported for Completions and Workovers with Hydraulic Fracturing are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and WellsWithFracturingDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4Emissions W W3648V3 The total carbon dioxide emissions reported for Completions and Workovers with Hydraulic Fracturing are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and WellCompletionsWorkoversDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3649V3 The total nitrous oxide emissions reported for Completions and Workovers with Hydraulic Fracturing are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and WellCompletionsWorkoversDetails/TotalN2OMetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2oEmissions W W3650V3 The total methane emissions reported for Gas Well Completions and Workovers without Fracturing are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCh4Emissions and WellCompletionsWorkoversDetails/TotalCh4MetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCh4Emissions W W3651V3 The total carbon dioxide emissions reported for Gas Well Completions and Workovers without Fracturing are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedCarbonDioxideEmissions and WellCompletionsWorkoversDetails/TotalCarbonDioxideEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalCo2Emissions W W3652V3 The total nitrous oxide emissions reported for Gas Well Completions and Workovers without Fracturing are not consistent within your annual report. The values reported in SubpartWSourceReportingFormRowDetails/TotalReportedN2OEmissions and WellCompletionsWorkoversDetails/TotalN2OMetricTonsEmissions are not equal. Please review these reported values and correct, as necessary. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions totalN2oEmissions W W3664V3 Well ID Number(s) [98.236(g)(5)(i) and (ii)]. You must enter a numeric value greater than or equal to zero. wellIdNumbers W W3688V3 For the Atmospheric Storage Tanks source category of subpart W, it appears that you used Calculation Methodology 3, but did not complete information in Table J.2.i for Wells, separators, and non-separator equipment using Calculation Method 3. These data are required by 98.236(j)(2)(i). GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions table10Data[1] W W3693V3 Well ID Number(s) [98.236(j)(1)(iii) and (2)(i)(A)]. Required if you delayed reporting either "Total annual volume of oil sent to tanks from all gas-liquid separators and direct from wells (Calculation Methods 1 or 2)" or "Total annual oil throughput that is sent to all atmospheric tanks in the basin (Calculation Method 3)". wellIdNumbers W W3695V3 You indicated that Calculation Method 1 or 2 was used to calculate emissions but no data was reported in Table J.1 Emissions from gas-liquid separators, non-separator equipment, or well with oil throughput using Calculation Method 1 or 2. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions table1Data[1] W W3696V3 You indicated that there were atmospheric tanks observed to have malfunctioning dump values, but no data reported in Table J.3 Emissions from improperly functioning dump valves. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions table7Data[1] W W3698V3 The facility reported natural gas distribution and another Subpart W industry segment, which is unexpected. Due to the unique definition of "facility" for the natural gas distribution segment, it cannot be co-located with any other Subpart W industry segments. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/BlowdownVentStacksDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationDetails/BlowdownOnshoreNaturalGasTransmissionPipelineCharacterizationRowDetails/TotalCo2Emissions selectedIndustrySegmentNumber W W3713V3 Count of desiccant dehydrators [98.236(e)(3)(i)]. You indicated that this facility operates desiccant dehydrators that are subject to reporting. This data element is required. desiccantDehydratorCount W W4000V3 Did the facility have any transmission tanks subject to reporting under 98.232 [98.236(k)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionTanksSubjectToReporting transmissionTanksSubjectToReporting W W4001V3 Were missing data procedures used for any parameters to calculate GHG emissions [98.235]? This data element is required. missingDataProceduresUsed W W4002V3 Transmission Tanks Table. Data is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionTanksSubjectToReporting transmissionTankEmissions W W4003V3 Unique Name or ID number for the transmission tank vent stack [98.236(k)(1)(i)]. It appears that you have entered data for a transmission tank vent stack without entering a unique name or ID number for the stack. This data element is required. uniqueIdentifier W W4004V3 Method used to determine if dump valve leakage occurred [98.236(k)(1)(ii)]. It appears that you have not reported the method used to determine if dump valve leakage occurred through transmission tank stack with the unique name or ID number [{1}]. This data element is required. Please review your report and provide the identified value(s), as necessary. dumpValveLeakageMethod W W4005V3 Did dump valve leakage occur? [98.236(k)(1)(iii)]. It appears that you did not indicate if dump valve leakage occurred through transmission tank stack with the unique name or ID number [{1}] This data element is required. Please review your report and provide the identified value(s), as necessary. dumpValveLeakageOccur W W4006V3 Was there a flare attached to the transmission storage tank vent? [98.236(k)(1)(iv)]. It appears that you did not indicate if a flare is attached to the transmission tank stack with the unique name or ID number [{1}]. This data element is required. Please review your report and provide the identified value(s), as necessary. flareAttachedToTransmissionTank W W4007V3 Did scrubber valve leakage occur while the vent stack was vented directly to the atmosphere? [98.236(k)(2)]. It appears that you did not indicate if scrubber valve leakage occurred while the transmission tank vent stack [{1}] was vented directly to the atmosphere. This data element is required. Please review your report and provide the identified value(s), as necessary. scrubberValveLeakageOccurAtmosphere W W4008V3 Method used to measure leak rate [98.236(k)(2)(i)]. It appears that you did not identify the method used to measure the leak rate for leakage that was vented directly to the atmosphere from transmission tank stack [{1}]. This data element is required if the leakage was vented directly to the atmosphere. leakRateMethod W W4009V3 Measured leak rate(standard cubic feet/hour) [98.236(k)(2)(ii)]. It appears that you did not indicate the measured leak rate (standard cubic feet/hour) for leakage directly to the atmosphere from transmission tank stack [{1}]. This data element is required if the leakage was vented directly to the atmosphere. measuredLeakRate W W4010V3 Measured leak rate (standard cubic feet/hour) [98.236(k)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/MeasuredLeakRate measuredLeakRate W W4011V3 Duration of time leak is counted as having occurred (vented to atmosphere) (hours) [98.236(k)(2)(iii)]. It appears that you did not report the duration of time leakage directly to the atmosphere is counted as having occurred for transmission tank stack [{1}]. This data element is required if the leakage was vented directly to the atmosphere. timeLeakDuration W W4012V3 Duration of time leak is counted as having occurred (vented to atmosphere) (hours) [98.236(k)(2)(iii)]. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/TimeLeakDuration timeLeakDuration W W4013V3 CO2 emissions from venting gas directly to the atmosphere (mt CO2) [98.236(k)(2)(iv)]. This data element is required because the leakage is reported to be vented directly to the atmosphere. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W4014V3 CO2 emissions from venting gas directly to the atmosphere (mt CO2) [98.236(k)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W4015V3 CH4 emissions from venting gas directly to the atmosphere (mt CH4) [98.236(k)(2)(v)]. This data element is required because the leakage is reported to be vented directly to the atmosphere. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/VentingCh4Emissions ventingCh4Emissions W W4016V3 CH4 emissions from venting gas directly to the atmosphere (mt CH4) [98.236(k)(2)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/VentingCh4Emissions ventingCh4Emissions W W4017V3 Did scrubber valve leakage occur while the vent stack was vented to a flare? [98.236(k)(3)]. You indicated that a flare was attached to transmission tank vent stack [{1}], but you did not indicate if scrubber valve leakage occurred while this vent stack was vented to a flare. This data element is required. Please review your report and provide the identified value(s), as necessary. scrubberValveLeakageOccurFlare W W4018V3 Method used to measure leak rate [98.236(k)(3)(ii)]. You indicated that scrubber valve leakage occurred while transmission tank vent stack [{1}] was vented to a flare, but you did not indicate the method used to measure the leak rate to the flare. This data element is required. Please review your report and provide the identified value(s), as necessary. leakRateFlareMethod W W4019V3 Measured leak rate (standard cubic feet/hour) [98.236(k)(3)(ii)]. It appears that you did not report the measured leak rate (standard cubic feet/hour) to the flare for transmission tank stack [{1}]. This data element is required. Please review your report and provide the identified value(s), as necessary. measuredFlareLeakRate W W4020V3 Measured leak rate (standard cubic feet/hour) [98.236(k)(3)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/MeasuredFlareLeakRate measuredFlareLeakRate W W4021V3 Duration of time that flaring occurred (hours) [98.236(k)(3)(iii)]. It appears that you did not report the duration of time that leakage to the flare occurred (hours) from transmission tank stack [{1}]. This data element is required. Please review your report and provide the identified value(s), as necessary. timeFlareLeakDuration W W4022V3 Duration of time that flaring occurred (hours) [98.236(k)(3)(iii)]. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/TimeFlareLeakDuration timeFlareLeakDuration W W4023V3 CO2 emissions from flaring gas (mt CO2) [98.236(k)(3)(iv)]. You indicated that this vent stack was flared. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W4024V3 CO2 emissions from flaring gas (mt CO2) [98.236(k)(3)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W4025V3 CH4 emissions from flaring gas (mt CH4) [98.236(k)(3)(v)]. You indicated that this vent stack was flared. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/FlaringCh4Emissions flaringCh4Emissions W W4026V3 CH4 emissions from flaring gas (mt CH4) [98.236(k)(3)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/FlaringCh4Emissions flaringCh4Emissions W W4027V3 N2O emissions from flaring gas (mt N2O) [98.236(k)(3)(vi)]. You indicated that this vent stack was flared. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/FlaringN2OEmissions flaringN2oEmissions W W4028V3 N2O emissions from flaring gas (mt N2O) [98.236(k)(3)(vi)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageTanksDetails/TransmissionStorageTanksRowDetails/FlaringN2OEmissions flaringN2oEmissions W W4029V3 Unique Name or ID number for the vent stack [98.236(k)(1)(i)]. It appears that you have entered data related to missing data procedures for a transmission tank stack but you have not entered the unique name or ID number for the stack. This data element is required if missing data procedures were used. missingUniqueId W W4030V3 Parameter for which missing data procedures were used. It appears that you have not indicated the parameter for which missing data procedures were used to develop substitute data for the transmission tank stack with Unique ID [{1}]. This data element is required if you used missing data procedures. missingDataElements W W4031V3 Measurement frequency for parameter for which missing data procedures were used. For transmission tank stack with Unique ID [{1}], you have reported using missing data procedures to develop substitute data for parameter [{2}], but it appears that you have not indicated the measurement frequency for this parameter. This data element is required if you used missing data procedures. missingFrequency W W4032V3 Number of quarters for which missing data procedures were used. This data element is required if the measurement frequency is "quarterly" for the parameter for which missing data procedures were used. missingQuarters W W4033V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageMissingDataProcUsedDetails/TransmissionStorageMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W4034V3 Total number of hours for which missing data procedures were used [98.3(c)(8) and 98.236(bb)(2)]. This data element is required if the measurement frequency for the parameter for which missing data procedures were used is more frequent than annually (except if the frequency is quarterly). missingHours W W4035V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageMissingDataProcUsedDetails/TransmissionStorageMissingDataProcUsedRowDetails/MissingHours missingHours W W4036V3 Missing data procedures that were used. For transmission tank stack with Unique ID [{1}], you have reported using missing data procedures to develop substitute data for parameter [{2}], but it appears that you have not described the missing data procedures that were used to develop the substitute data. This data element is required if you used missing data procedures. missingProceduresUsed W W4037V3 The sum of CO2 emissions from all Transmission Tanks did not equal the reported Transmission Tanks CO2 emission roll-up total. Please check your Transmission Tanks roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageMissingDataProcUsedDetails/TransmissionStorageMissingDataProcUsedRowDetails/MissingHours totalCo2Emissions W W4038V3 The sum of CH4 emissions from all Transmission Tanks did not equal the reported Transmission Tanks CH4 emission roll-up total. Please check your Transmission Tanks roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageMissingDataProcUsedDetails/TransmissionStorageMissingDataProcUsedRowDetails/MissingHours totalCh4Emissions W W4039V3 The sum of N2O emissions from all Transmission Tanks did not equal the reported Transmission Tanks N2O emission roll-up total. Please check your Transmission Tanks roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/TransmissionTanksDetails/TransmissionStorageMissingDataProcUsedDetails/TransmissionStorageMissingDataProcUsedRowDetails/MissingHours totalN2oEmissions W W4502V3 Did the facility perform well testing that resulted in venting OR flaring? This data element is required for Onshore petroleum and natural gas production facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/DidFacilityPerformWellTesting didFacilityPerformWellTesting W W4503V3 Were missing data procedures used for any parameters to calculate GHG emissions? You indicated that well testing emissions are being reported. This data element is required. missingDataProceduresUsed W W4504V3 Number of wells tested in calendar year [98.236(l)(1-4)(i)]. This data element is required for each specified equation used and vent/flare combination. numberOfWellsTested W W4505V3 Number of wells tested in calendar year. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/NumberOfWellsTested numberOfWellsTested W W4506V3 Average gas to oil ratio (cubic feet of gas per barrel oil) [98.236(l)(1-2)(iv)]. This data element is required. averageGasToOilRatio W W4507V3 Average gas to oil ratio (cubic feet of gas per barrel oil). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/AverageGasToOilRatio averageGasToOilRatio W W4508V3 Average number of days wells were tested [98.236(l)(1-4)(iii)]. This data element is required for each specified equation used and vent/flare combination. averageNumberOfDaysTested W W4509V3 Average number of days wells were tested. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/AverageNumberOfDaysTested averageNumberOfDaysTested W W4510V3 Total CO2 Emissions from Venting (mt CO2) [98.236(l)(1)(v] and [98.236(l)(3)(iv)]. You reported that emissions are vented. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W4511V3 Total CO2 Emissions from Venting (mt CO2). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W4512V3 Total CH4 Emissions from Venting (mt CH4) [98.236(l)(1)(vi)] and [98.236(l)(3)(vi)]. You reported that emissions are vented. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/VentingCh4Emissions ventingCh4Emissions W W4513V3 Total CH4 Emissions from Venting (mt CH4). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/VentingCh4Emissions ventingCh4Emissions W W4514V3 Total CO2 Emissions from Flaring (mt CO2) [98.236(l)(2)(vi)] and [98.236(l)(4)(v)]. You reported that emissions are flared. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W4515V3 Total CO2 Emissions from Flaring (mt CO2). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W4516V3 Total CH4 Emissions from Flaring (mt CH4) [98.236(l)(2)(vii)] and [98.236(l)(4)(vi)]. You reported that emissions are flared. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/FlaringCh4Emissions flaringCh4Emissions W W4517V3 Total CH4 Emissions from Flaring (mt CH4). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/FlaringCh4Emissions flaringCh4Emissions W W4518V3 Total N2O Emissions from Flaring (mt N2O) [98.236(l)(2)(vii)] and [98.236(l)(4)(vii)]. You reported that emissions are flared. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/FlaringN2OEmissions flaringN2oEmissions W W4519V3 Total N2O Emissions from Flaring (mt N2O). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/FlaringN2OEmissions flaringN2oEmissions W W4520V3 This form is required for this industry segment. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/FlaringN2OEmissions tableData[1] W W4521V3 Report the equation used to calculate annual volumetric natural gas emissions [98.236(l)]. You reported that there is venting or flaring from well testing at this facility. This data element is required. naturalGasEquationUsed W W4522V3 Were well testing emissions vented OR flared [98.236(l)]? This data element is required for each specified equation used to calculate natural gas emissions. emissionsVentedOrFlared W W4523V3 Are the only wells used to calculate flow rates OR production rates wildcat OR delineation wells subject to 2-year delay in reporting [98.236(l)(1)(iv)] and [98.236(l)(2)(iv)]? This data element is required. wellsSubjectedToTwoYearDelay W W4524V3 Average flow rate for wells tested [98.236(l)(1)(v)] and [98.236(l)(2)(v)]. This data element is required if Eq W-17A is used and the well is not subject to a 2-year delay in reporting. wellsTestedFlowRate W W4525V3 Average flow rate for wells tested. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/WellsTestedFlowRate wellsTestedFlowRate W W4526V3 Average annual production rate for wells tested [98.236(l)(3)(iv)] and [98.236(l)(4)(iv)]. This data element is required if Eq. W-17B is used and the well is not subject to a 2-year delay in reporting. wellsTestedAnnualProductionRate W W4527V3 Average annual production rate for wells tested. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingBasinsDetails/WellTestingBasinsRowDetails/WellsTestedAnnualProductionRate wellsTestedAnnualProductionRate W W4528V3 Was the average GOR or annual production rate reported on an Actual OR Standard Basis? This data element is required in conjunction with the average GOR and the average annual production rate. productionRateForWellReported W W4529V3 Report the temperature used to calculate GOR or production rate. This data element is required. productionRateCalcTemperature W W4531V3 Report the pressure used to calculate GOR or production rate. This data element is required. productionRateCalcPressure W W4536V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingMissingDataProcUsedDetails/WellTestingMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W4538V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingMissingDataProcUsedDetails/WellTestingMissingDataProcUsedRowDetails/MissingHours missingHours W W4550V3 The average number of days wells were tested is outside the expected range of 0 to {1}. Please confirm your calculations and reported values. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/WellTestingDetails/WellTestingMissingDataProcUsedDetails/WellTestingMissingDataProcUsedRowDetails/MissingHours averageNumberOfDaysTested W W5000 You have not uploaded an integrated reporting form file. none W W5004V3 Unique Name or ID for leak or vent [98.236(o)(2)(i)(C)]. Facility reported data for centrifugal compressor leak or vent ID {1} in Table O.2.ii but did not enter corresponding data in Table O.2.i (required by 98.236(o)(2)(i)). Please review these reported IDs and correct, as necessary. leakOrVentId W W5010V3 Did the facility have any associated gas venting or flaring? This data element is required for Onshore petroleum and natural gas production facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/DidFacilityHaveGasVenting didFacilityHaveGasVenting W W5011V3 Associated Gas Venting and Flaring Table. Data are required. associatedGasVentingFlaring W W5012V3 Were missing data procedures used for any parameters to calculate GHG emissions? This data element is required. missingDataProceduresUsed W W5013V3 Sub-basin ID. You indicated that you vent or flare associated gas. This data element is required. subBasinId W W5014V3 Specify whether the associated natural gas was vented OR flared. This data element is required for each sub-basin ID. naturalGasVentedOrFlared W W5015V3 Average gas to oil ratio for the Sub-Basin (standard cubic feet of gas per barrel of oil). This data element is required for each sub-basin ID. averageGasToOilRatio W W5016V3 Average gas to oil ratio for the Sub-Basin (standard cubic feet of gas per barrel of oil). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/AverageGasToOilRatio averageGasToOilRatio W W5017V3 Are the only wells in the sub-basin used to determine "volume of oil produced" OR "volume of associated gas sent to sales" wildcat OR delineation wells subject to a 2-year delay in reporting? This data element is required for each sub-basin ID. wellsSubjectedToTwoYearDelay W W5018V3 Volume of oil produced during venting/flaring. This data element is required unless you have claimed a 2-year reporting delay. volumeOfOilProduced W W5019V3 Volume of oil produced during venting/flaring. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/VolumeOfOilProduced volumeOfOilProduced W W5020V3 Volume of associated gas sent to sales. This data element is required unless you have claimed a 2-year reporting delay. volumeOfGasSentToSales W W5021V3 Volume of associated gas sent to sales. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/VolumeOfGasSentToSales volumeOfGasSentToSales W W5022V3 Number of wells venting associated gas. You reported venting for this sub-basin. This data element is required. numberOfWellsVenting W W5023V3 Number of wells venting associated gas. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/NumberOfWellsVenting numberOfWellsVenting W W5024V3 CO2 Emissions from Venting (mt CO2). You reported venting for this sub-basin. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W5025V3 CO2 Emissions from Venting (mt CO2). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/VentingCarbonDioxideEmissions ventingCo2Emissions W W5026V3 CH4 Emissions from Venting (mt CH4). You reported venting for this sub-basin. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/VentingCh4Emissions ventingCh4Emissions W W5027V3 CH4 Emissions from Venting (mt CH4). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/VentingCh4Emissions ventingCh4Emissions W W5028V3 Number of wells flaring associated gas. You reported flaring for this sub-basin. This data element is required. numberOfWellsFlaring W W5029V3 Number of wells flaring associated gas. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/NumberOfWellsFlaring numberOfWellsFlaring W W5030V3 CO2 Emissions from Flaring (mt CO2). You reported flaring for this sub-basin. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W5031V3 CO2 Emissions from Flaring (mt CO2). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/FlaringCarbonDioxideEmissions flaringCo2Emissions W W5032V3 CH4 Emissions from Flaring (mt CH4). You reported flaring for this sub-basin This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/FlaringCh4Emissions flaringCh4Emissions W W5033V3 CH4 Emissions from Flaring (mt CH4). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/FlaringCh4Emissions flaringCh4Emissions W W5034V3 N2O Emissions from Flaring (mt N2O). You reported flaring for this sub-basin. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/FlaringN2OEmissions flaringN2oEmissions W W5035V3 N2O Emissions from Flaring (mt N2O). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringBasinsDetails/AssociatedGasVentingFlaringBasinsRowDetails/FlaringN2OEmissions flaringN2oEmissions W W5039V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringMissingDataProcUsedDetails/AssociatedGasVentingFlaringMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W5041V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/AssociatedGasVentingFlaringDetails/AssociatedGasVentingFlaringMissingDataProcUsedDetails/AssociatedGasVentingFlaringMissingDataProcUsedRowDetails/MissingHours missingHours W W5102V3 For transmission tank vent stack [{1}], emissions vented directly to the atmosphere were reported despite the leak rate being 0, which is unexpected. Please confirm your calculations and reported values and revise, as necessary. measuredLeakRate W W5103V3 For transmission tank vent stack [{1}], flared emissions were reported despite the leak rate being 0, which is unexpected. Please confirm your calculations and reported values and revise, as necessary. measuredFlareLeakRate W W5115V3 In your XML report for Reporting Year {1}, you entered "no" for the data element "DumpValveLeakageOccur" for transmission tank vent stack {2}, but this entry is inconsistent with the fact that you also either indicated "yes" for the data element "ScrubberValveLeakageOccurAtmosphere," entered a leak rate greater than 0, or entered CO2 and/or CH4 emissions greater than 0 for this vent stack. Please confirm your reported value(s) and revise, as necessary. dumpValveLeakageOccur W W5501V3 Does the facility have flare stacks? This data element is required for Onshore petroleum and natural gas production, Onshore natural gas processing, Onshore natural gas transmission compression, Underground natural gas storage, LNG storage, LNG import and export equipment, and Onshore petroleum and natural gas gathering and boosting facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/DoesFacilityHaveFlareStacks doesFacilityHaveFlareStacks W W5502V3 Flare Stacks Table. Data is required. flareStacks W W5503V3 Were missing data procedures used for any parameters to calculate GHG emissions? You indicated that flare stack emissions are being reported. This data element is required. missingDataProceduresUsed W W5505V3 Were CEMS used to measure CO2 emissions for flare {1} [98.233(n)(8)] [98.236(n)(12)]? This data element is required. Please review your report and provide the identified value(s), as necessary. wereCemsUsed W W5506V3 Does flare {1} have a continuous flow monitor [98.236(n)(2)]? This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. doesFlareHaveContinuousFlowMonitor W W5507V3 Does flare {1} have a continuous gas analyzer [98.236(n)(3)]? This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. doesFlareHaveContinuousGasAnalyzer W W5508V3 Volume of gas sent to flare {1} (standard cubic feet) [98.236(n)(4)]. This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. gasSentToFlare W W5509V3 Volume of gas sent to flare (standard cubic feet). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/GasSentToFlare gasSentToFlare W W5510V3 Fraction of gas sent to un-lit flare {1} [98.236(n)(5)]. This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. fractionOfGasSent W W5511V3 Fraction of gas sent to un-lit flare. This value should be reported as a fraction, and should be within the range of 0 to 1. The value you provided is outside that range. Please correct this value. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FractionOfGasSent fractionOfGasSent W W5512V3 Combustion efficiency of flare {1} [98.236(n)(6)]. This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. flareCombustionEfficiency W W5513V3 Flare combustion efficiency. You must enter a value that is greater than or equal to 0 and less than or equal to 1. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareCombustionEfficiency flareCombustionEfficiency W W5514V3 Mole fraction of CH4 in the gas feed to flare {1} [98.236(n)(7)]. This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. flareFeedGasCH4MoleFraction W W5515V3 Mole fraction of CH4 in flare gas feed. This value should be reported as a fraction, and should be within the range of 0 to 1. The value you provided is outside that range. Please correct this value. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareFeedGasCH4MoleFraction flareFeedGasCH4MoleFraction W W5516V3 Mole fraction of CO2 in the gas feed to flare {1} [98.236(n)(8)]. This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. flareFeedGasCO2MoleFraction W W5517V3 Mole fraction of CO2 in flare gas feed. This value should be reported as a fraction, and should be within the range of 0 to 1. The value you provided is outside that range. Please correct this value. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/FlareFeedGasCO2MoleFraction flareFeedGasCO2MoleFraction W W5518V3 CO2 emissions (mt CO2) [98.236(n)(9)]. This data element is required for each flare stack. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/Co2Emissions co2Emissions W W5519V3 CO2 emissions (mt CO2). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/Co2Emissions co2Emissions W W5520V3 CH4 emissions (mt CH4) [98.236(n)(10)]. This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/Ch4Emissions ch4Emissions W W5521V3 CH4 emissions (mt CH4). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/Ch4Emissions ch4Emissions W W5522V3 N2O emissions (mt N2O) [98.236(n)(11)]. This data element is required except when you report using CEMS to measure CO2 emissions from the flare stack. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/N2OEmissions n2oEmissions W W5523V3 N2O emissions (mt N2O). You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlareStacksDetails/UniqueFlareStacksRowDetails/N2OEmissions n2oEmissions W W5527V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W5529V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingHours missingHours W W5531V3 The sum of CO2 emissions from all Flare Stacks did not equal the reported Flare Stacks CO2 emission roll-up total. Please check your Flare Stacks roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingHours totalCo2Emissions W W5532V3 The sum of CH4 emissions from all Flare Stacks did not equal the reported Flare Stacks CH4 emission roll-up total. Please check your Flare Stacks roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingHours totalCh4Emissions W W5533V3 The sum of N2O emissions from all Flare Stacks did not equal the reported Flare Stacks N2O emission roll-up total. Please check your Flare Stacks roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/FlareStacksDetails/UniqueFlarestacksMissingDataProcUsedDetails/UniqueFlarestacksMissingDataProcUsedRowDetails/MissingHours totalN2oEmissions W W6000V3 Does the facility have any centrifugal compressors subject to reporting under 98.232 [98.236(o)]? This data element is required for facilities in the Onshore petroleum and natural gas production, Onshore natural gas processing, Onshore natural gas transmission compression, Underground natural gas storage, Liquefied natural gas, LNG import and export equipment, and Onshore petroleum and natural gas gathering and boosting industry segments. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/DoesFacilityHaveCentrifugalCompressors doesFacilityHaveCentrifugalCompressors W W6003V3 Were missing data procedures used for any parameters to calculate GHG emissions? This data element is required. missingDataProceduresUsed W W6004V3 Compressor ID or Unique Name [98.236(o)(1)(i)]. This data element is required (except for facilities in the Onshore petroleum and natural gas production or the Onshore petroleum and natural gas gathering and boosting industry segments). compressorIdentifier W W6005V3 Total time in operating-mode (hours) [98.236(o)(1)(ii)]. This data element is required. totalOperatingModeHours W W6006V3 Total time in operating-mode (hours) [98.236(o)(1)(ii)]. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsActivityDataDetails/CentrifugalCompressorsActivityDataRowDetails/TotalOperatingModeHours totalOperatingModeHours W W6007V3 Total time in not-operating-depressurized-mode (hours) [98.236(o)(1)(iii)]. This data element is required. totalNotOperatingModeHours W W6008V3 Total time in not-operating-depressurized-mode (hours) [98.236(o)(1)(iii)]. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsActivityDataDetails/CentrifugalCompressorsActivityDataRowDetails/TotalNotOperatingModeHours totalNotOperatingModeHours W W6009V3 Compressor measured in operating-mode? [98.236(o)(1)(iv)]. This data element is required. compressorMeasuredOperatingMode W W6010V3 Compressor measured in not-operating-depressurized-mode? [98.236(o)(1)(v)]. This data element is required. compressorMeasuredNotOperatingMode W W6011V3 Compressor had blind flanges installed? [98.236(o)(1)(x)]. This data element is required. blindFlangesInstalled W W6013V3 Seal Type (wet or dry) [98.236(o)(1)(xi)]. This data element is required. sealType W W6014V3 Number of wet seals [98.236(o)(1)(xii)]. You reported this compressor has wet seals. This data element is required. numberOfWetSeals W W6015V3 Number of wet seals [98.236(o)(1)(xii)]. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsActivityDataDetails/CentrifugalCompressorsActivityDataRowDetails/NumberOfWetSeals numberOfWetSeals W W6016V3 Power output of compressor driver (hp) [98.236(o)(1)(xiii)]. This data element is required. compressorDriverPowerOutput W W6017V3 Power output of compressor driver (hp) [98.236(o)(1)(xiii)]. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsActivityDataDetails/CentrifugalCompressorsActivityDataRowDetails/CompressorDriverPowerOutput compressorDriverPowerOutput W W6018V3 Compressor had scheduled depressurized shutdown during reporting year? [98.236(o)(1)(xiv)]. This data element is required. hadScheduledShutdown W W6019V3 Unique Compressor Name or ID [98.236(o)(2)(i)(A)]. This data element is required. compressorIdentifier W W6020V3 Centrifugal compressor source [98.236(o)(2)(i)(B)]. This data element is required for each reported compressor ID. compressorSource W W6021V3 Unique Name or ID for leak or vent [98.236(o)(2)(i)(C)]. This data element is required for the blowdown valve and isolation valve associated with each Unique Compressor Name/ID. leakOrVentId W W6022V3 Unique Name or ID for leak or vent [98.236(o)(2)(i)(C)]. This Leak or Vent ID does not match any of the entries in Table O.2.ii. This data element is required for each leak or vent identified in Table O.2.i. leakOrVentId W W6023V3 Leak or vent for a single compressor source or a manifolded group? [98.236(o)(2)(ii)(A)] [98.236(o)(1)(vi)]. This data element is required for each unique leak or vent ID. singleSourceOrManifoldGroup W W6024V3 Where are leak or vent emissions released to? [98.236(o)(1)(vii) through (ix)] [98.236(o)(2)(ii)(A)]. This data element is required for each unique leak or vent ID. leakOrVentEmissionsReleased W W6025V3 Was an "as found" measurement conducted on the leak or vent? [98.236(o)(2)(ii)(B)]. This data element is required for each unique leak or vent ID released to the atmosphere. asFoundMeasurementConducted W W6026V3 Were continuous measurements conducted on the leak or vent? [98.236(o)(2)(ii)(C)]. This data element is required for each unique leak or vent ID released to the atmosphere. continousMeasurementsConducted W W6027V3 CO2 emissions vented to atmosphere (mt CO2) [98.236(o)(2)(ii)(D)(1)]. You indicated emissions are vented to the atmosphere from this leak or vent. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentDataDetails/CentrifugalCompressorsLeakOrVentDataRowDetails/Co2EmissionsVented co2EmissionsVented W W6028V3 CO2 emissions vented to atmosphere (mt CO2) [98.236(o)(2)(ii)(D)(1)]. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentDataDetails/CentrifugalCompressorsLeakOrVentDataRowDetails/Co2EmissionsVented co2EmissionsVented W W6029V3 CH4 emissions vented to atmosphere (mt CH4) [98.236(o)(2)(ii)(D)(2)]. You indicated emissions are vented to the atmosphere from this leak or vent. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentDataDetails/CentrifugalCompressorsLeakOrVentDataRowDetails/Ch4EmissionsVented ch4EmissionsVented W W6030V3 CH4 emissions vented to atmosphere (mt CH4) [98.236(o)(2)(ii)(D)(2)]. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentDataDetails/CentrifugalCompressorsLeakOrVentDataRowDetails/Ch4EmissionsVented ch4EmissionsVented W W6031V3 Percentage of time the device was operational when compressor source emissions were routed to device [98.236(o)(2)(ii)(E)]. This data element is required for each unique leak or vent ID. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentDataDetails/CentrifugalCompressorsLeakOrVentDataRowDetails/PercentageOfTimeDeviceOperational percentageOfTimeDeviceOperational W W6032V3 Percentage of time the device was operational when compressor source emissions were routed to device [98.236(o)(2)(ii)(E)]. You must enter a numeric value greater than or equal to zero but less than or equal 100. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentDataDetails/CentrifugalCompressorsLeakOrVentDataRowDetails/PercentageOfTimeDeviceOperational percentageOfTimeDeviceOperational W W6033V3 Unique Name or ID for leak or vent [98.236(o)(3)(i)(A)]. This data element is required for all leak/vent IDs with "as found" measurements. leakOrVentId W W6034V3 Measurement date (mm/dd/yyyy) [98.236(o)(3)(i)(B)]. This data element is required for each vent or leak ID with "as found" measurement sample data. measurementDate W W6035V3 Measurement method [98.236(o)(3)(i)(C)]. This data element is required for each vent or leak ID with "as found" measurement sample data. measurementMethod W W6036V3 Measured flow rate, MTs,m, MTs,g,avg (standard cubic feet/hour) [98.236(o)(3)(i)(D)]. This data element is required for each vent or leak ID with "as found" measurement sample data. measurementFlowRate W W6037V3 Measured flow rate, MTs,m, MTs,g,avg (standard cubic feet/hour) [98.236(o)(3)(i)(D)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentSampleDataDetails/CentrifugalCompressorsLeakOrVentSampleDataRowDetails/MeasurementFlowRate measurementFlowRate W W6038V3 Is the measurement location prior to or after commingling with non-compressor emission sources? [98.236(o)(3)(i)(F)]. This data element is required for each vent or leak ID with "as found" measurement sample data. measurementLocation W W6042V3 Compressor mode-source combination reporter emission factor, EFs,m (standard cubic feet per hour) [98.236(o)(3)(ii)(B)] for {1} and {2}. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsEmissionFactorsSampleDataDetails/CentrifugalCompressorsEmissionFactorsSampleDataRowDetails/CompressorModeEmissionFactor compressorModeEmissionFactor W W6043V3 Total number of compressors measured in the compressor mode-source combination in current reporting year and preceding two reporting years [98.236(o)(3)(ii)(C)] for {1} and {2}. This data element is required. Please review your report and provide the identified value(s), as necessary. totalNumberOfCompressors W W6044V3 Total number of compressors measured in the compressor mode-source combination in current reporting year and preceding two reporting years [98.236(o)(3)(ii)(C)] for {1} and {2}. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsEmissionFactorsSampleDataDetails/CentrifugalCompressorsEmissionFactorsSampleDataRowDetails/TotalNumberOfCompressors totalNumberOfCompressors W W6045V3 Is the reporter emission factor facility-specific or based on all of the reporter\'s applicable facilities? [98.236(o)(3)(ii)(D)]. This data element is required. emissionFactorType W W6046V3 Unique Name or ID for leak or vent [98.236(o)(4)(i)]. This data element is required for leak/vent IDs previously characterized as having continuous monitoring. leakOrVentId W W6047V3 Measured volume of flow during the reporting year, Qs,v, Qs,g (million standard cubic feet) [98.236(o)(4)(ii)]. This data element is required. measuredVolume W W6048V3 Measured volume of flow during the reporting year, Qs,v, Qs,g (million standard cubic feet) [98.236(o)(4)(ii)]. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentMeasurementDetails/CentrifugalCompressorsLeakOrVentMeasurementRowDetails/MeasuredVolume measuredVolume W W6049V3 Did the measured volume of flow during the reporting year include compressor blowdowns? [98.236(o)(4)(iii)]. This data element is required. includeCompressorBlowdowns W W6050V3 Is the measurement location prior to or after commingling with non-compressor emission sources [98.236(o)(4)(iv)]. This data element is required. measurementLocation W W6051V3 Number of Centrifugal Compressors with wet seal oil degassing vents, Count [98.236(o)(5)(i)]. This data element is required for facilities in Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting industry segments. compressorCount W W6052V3 Number of Centrifugal Compressors with wet seal oil degassing vents, Count [98.236(o)(5)(i)]. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorCount compressorCount W W6053V3 Total annual Centrifugal Compressor CO2 Emissions (mt CO2) [98.236(o)(5)(ii)]. This data element is required if the number of centrifugal compressors with wet seal oil degassing vents is greater than 0. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/TotalAnnualCompressorCarbonDioxideEmissions totalAnnualCompressorCo2Emissions W W6054V3 Total annual Centrifugal Compressor CO2 Emissions (mt CO2) [98.236(o)(5)(ii)]. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/TotalAnnualCompressorCarbonDioxideEmissions totalAnnualCompressorCo2Emissions W W6055V3 Total annual Centrifugal Compressor CH4 Emissions (mt CH4) [98.236(o)(5)(iii)]. This data element is required if the number of centrifugal compressors with wet seal oil degassing vents is greater than 0. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/TotalAnnualCompressorMethaneEmissions totalAnnualCompressorCh4Emissions W W6056V3 Total annual Centrifugal Compressor CH4 Emissions (mt CH4) [98.236(o)(5)(iii)]. You must enter a numeric value greater than or equal to zero. Please review and correct. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/TotalAnnualCompressorMethaneEmissions totalAnnualCompressorCh4Emissions W W6061V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorActivityMissingDataProcUsedDetails/CompressorActivityMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6063V3 Total number of hours for which missing data procedures were used [98.3(c)(8)], [98.236(bb)(2)]. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorActivityMissingDataProcUsedDetails/CompressorActivityMissingDataProcUsedRowDetails/MissingHours missingHours W W6069V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorEmissionFactorsMissingDataProcUsedDetails/CompressorEmissionFactorsMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6071V3 Total number of hours for which missing data procedures were used [98.3(c)(8)], [98.236(bb)(2)]. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorEmissionFactorsMissingDataProcUsedDetails/CompressorEmissionFactorsMissingDataProcUsedRowDetails/MissingHours missingHours W W6077V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorLeakOrVentMissingDataProcUsedDetails/CompressorLeakOrVentMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6079V3 Total number of hours for which missing data procedures were used [98.3(c)(8)], [98.236(bb)(2)]. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorLeakOrVentMissingDataProcUsedDetails/CompressorLeakOrVentMissingDataProcUsedRowDetails/MissingHours missingHours W W6084V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorMeasurementMissingDataProcUsedDetails/CompressorMeasurementMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6086V3 Total number of hours for which missing data procedures were used [98.3(c)(8)], [98.236(bb)(2)]. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorMeasurementMissingDataProcUsedDetails/CompressorMeasurementMissingDataProcUsedRowDetails/MissingHours missingHours W W6090V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorPetroleumGasMissingDataProcUsedDetails/CompressorPetroleumGasMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6092V3 Total number of hours for which missing data procedures were used [98.3(c)(8)], [98.236(bb)(2)]. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CompressorPetroleumGasMissingDataProcUsedDetails/CompressorPetroleumGasMissingDataProcUsedRowDetails/MissingHours missingHours W W6211V3 Unique Name or ID for leak or vent [98.236(o)(2)(i)(C)]. The reported leak or vent ID in Table O.2.i (or the SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsCompressorSourceDetails node in an XML report) must also be listed in Table O.2.ii (or the SubPartW/SubPartWReportingFormsDetails/CentrifugalCompressorsDetails/CentrifugalCompressorsLeakOrVentDataDetails node in an XML report). Please use the same leak or vent ID from Table O.2.i in Table O.2.ii by copying the entry from Table O.2.i and using Paste Special/Values when pasting the entry into Table O.2.ii. Please review and correct your report as indicated. leakOrVentId W W6500V3 Does the facility have any reciprocating compressors subject to reporting under 98.232 [98.236(p)]? This data element is required for facilities in the Onshore petroleum and natural gas production, Onshore natural gas processing, Onshore natural gas transmission compression, Underground natural gas storage, Liquefied natural gas, LNG import and export equipment, and Onshore petroleum and natural gas gathering and boosting industry segments. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/DoesFacilityHaveReciprocatingCompressors doesFacilityHaveReciprocatingCompressors W W6503V3 Were missing data procedures used for any parameters to calculate GHG emissions? This data element is required. missingDataProceduresUsed W W6505V3 Total time in operating-mode (hours) [98.236(p)(1)(ii)]. This data element is required. operatingModeTotalTime W W6506V3 Total time in operating-mode (hours) [98.236(p)(1)(ii)]. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsActivityDataDetails/ReciprocatingCompressorsActivityDataRowDetails/OperatingModeTotalTime operatingModeTotalTime W W6507V3 Total time in standby-pressurized-mode (hours) [98.236(p)(1)(iii)]. This data element is required. pressurizedModeTotalTime W W6508V3 Total time in standby-pressurized-mode (hours) [98.236(p)(1)(iii)]. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsActivityDataDetails/ReciprocatingCompressorsActivityDataRowDetails/PressurizedModeTotalTime pressurizedModeTotalTime W W6509V3 Total time in not-operating-depressurized-mode (hours) [98.236(p)(1)(iv)]. This data element is required. notOperatingTotalTime W W6510V3 Total time in not-operating-depressurized-mode (hours) [98.236(p)(1)(iv)]. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsActivityDataDetails/ReciprocatingCompressorsActivityDataRowDetails/NotOperatingTotalTime notOperatingTotalTime W W6511V3 Compressor measured in operating-mode? [98.236(p)(1)(v)] . This data element is required. compressorMeasuredOperatingMode W W6512V3 Compressor measured in not-operating-depressurized-mode? [98.236(p)(1)(vii)]. This data element is required. compressorMeasuredNotOperatingMode W W6513V3 Compressor measured in standby-pressurized-mode? [98.236(p)(1)(vi)] . This data element is required. compressorMeasuredPressurizedMode W W6514V3 Compressor had blind flanges installed? [98.236(p)(1)(xii)] . This data element is required. blindFlangesInstalled W W6516V3 Power output of compressor driver (hp) [98.236(p)(1)(xiii)] . This data element is required. compressorDriverPowerOutput W W6517V3 Power output of compressor driver (hp) [98.236(p)(1)(xiii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsActivityDataDetails/ReciprocatingCompressorsActivityDataRowDetails/CompressorDriverPowerOutput compressorDriverPowerOutput W W6518V3 Compressor had scheduled depressurized shutdown during reporting year? [98.236(p)(1)(xiv)]. This data element is required. hadScheduledShutdown W W6521V3 Unique Name or ID for leak or vent [98.236(p)(2)(i)(C)]. This data element is required for the blowdown valve, isolation valve and rod packing sources associated with each Unique Compressor Name/ID. leakOrVentId W W6522V3 Was an "as found" measurement conducted on the leak or vent? [98.236(p)(2)(ii)(B)]. This data element is required for each unique leak or vent ID released to the atmosphere. asFoundMeasurementConducted W W6523V3 Unique Name or ID for leak or vent [98.236(p)(2)(i)(C)]. Facility reported data for reciprocating compressor leak or vent ID {1} in Table P.2.ii but did not enter corresponding data in Table P.2.i (required by 98.236(p)(2)(i)). Please review these reported IDs and correct, as necessary. leakOrVentId W W6524V3 Leak or vent for a single compressor source or a manifolded group? [98.236(p)(2)(ii)(A)] [98.236(p)(1)(viii)]. This data element is required for each unique leak or vent ID. singleSourceOrManifoldGroup W W6526V3 Were continuous measurements conducted on the leak or vent? [98.236(p)(2)(ii)(C)]. This data element is required for each unique leak or vent ID released to the atmosphere. continousMeasurementsConducted W W6527V3 CO2 emissions vented to atmosphere (mt CO2) [98.236(p)(2)(ii)(D)(1)]. You indicated emissions are vented to the atmosphere from this leak or vent. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsLeakOrVentDataDetails/ReciprocatingCompressorsLeakOrVentDataRowDetails/Co2EmissionsVented co2EmissionsVented W W6528V3 CO2 emissions vented to atmosphere (mt CO2) [98.236(p)(2)(ii)(D)(1)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsLeakOrVentDataDetails/ReciprocatingCompressorsLeakOrVentDataRowDetails/Co2EmissionsVented co2EmissionsVented W W6529V3 CH4 emissions vented to atmosphere (mt CH4) [98.236(p)(2)(ii)(D)(2)].You indicated emissions are vented to the atmosphere from this leak or vent. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsLeakOrVentDataDetails/ReciprocatingCompressorsLeakOrVentDataRowDetails/Ch4EmissionsVented ch4EmissionsVented W W6530V3 CH4 emissions vented to atmosphere (mt CH4) [98.236(p)(2)(ii)(D)(2)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsLeakOrVentDataDetails/ReciprocatingCompressorsLeakOrVentDataRowDetails/Ch4EmissionsVented ch4EmissionsVented W W6531V3 Percentage of time the device was operational when compressor source emissions were routed to device [98.236(p)(2)(ii)(E)]. This data element is required for each unique leak or vent ID. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsLeakOrVentDataDetails/ReciprocatingCompressorsLeakOrVentDataRowDetails/PercentageOfTimeDeviceOperational percentageOfTimeDeviceOperational W W6532V3 Percentage of time the device was operational when compressor source emissions were routed to device [98.236(p)(2)(ii)(E)]. You must enter a numeric value greater than or equal to zero but less than or equal 100. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsLeakOrVentDataDetails/ReciprocatingCompressorsLeakOrVentDataRowDetails/PercentageOfTimeDeviceOperational percentageOfTimeDeviceOperational W W6535V3 Measurement method [98.236(p)(3)(i)(C)]. This data element is required for each vent or leak ID with "as found" measurement sample data. measurementMethod W W6536V3 Measured flow rate (standard cubic feet/hour) [98.236(p)(3)(i)(D)]. This data element is required for each vent or leak ID with "as found" measurement sample data. measurementFlowRate W W6537V3 Measured flow rate (standard cubic feet/hour) [98.236(p)(3)(i)(D)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsLeakOrVentSampleDataDetails/ReciprocatingCompressorsLeakOrVentSampleDataRowDetails/MeasurementFlowRate measurementFlowRate W W6538V3 Is the measurement location prior to or after commingling with non-compressor emission sources? [98.236(p)(3)(i)(F)]. This data element is required for each vent or leak ID with "as found" measurement sample data. measurementLocation W W6540V3 Compressor mode-source combination reporter emission factor, EFs,m (standard cubic feet per hour) [98.236(p)(3)(ii)(B)] for {1} and {2}. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsEmissionFactorsSampleDataDetails/ReciprocatingCompressorsEmissionFactorsSampleDataRowDetails/CompressorModeEmissionFactor compressorModeEmissionFactor W W6541V3 Total number of compressors measured in the compressor mode-source combination in current reporting year and preceding two reporting years, Countm [98.236(p)(3)(ii)(C)] for {1} and {2}. This data element is required. Please review your report and provide the identified value(s), as necessary. totalNumberOfCompressors W W6542V3 Total number of compressors measured in the compressor mode-source combination in current reporting year and preceding two reporting years, Countm [98.236(p)(3)(ii)(C)] for {1} and {2}. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsEmissionFactorsSampleDataDetails/ReciprocatingCompressorsEmissionFactorsSampleDataRowDetails/TotalNumberOfCompressors totalNumberOfCompressors W W6543V3 Is the reporter emission factor facility-specific or based on all of the reporter\'s applicable facilities? [98.236(p)(3)(ii)(D)]. This data element is required. emissionFactorType W W6545V3 Measured volume of flow during the reporting year (million standard cubic feet) (98.236(p)(4)(ii)]. This data element is required. measuredVolume W W6546V3 Measured volume of flow during the reporting year(million standard cubic feet) [98.236(p)(4)(ii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorsLeakOrVentMeasurementDetails/ReciprocatingCompressorsLeakOrVentMeasurementRowDetails/MeasuredVolume measuredVolume W W6547V3 Did the measured volume of flow during the reporting year include compressor blowdowns? [98.236(p)(4)(iii)]. This data element is required. includeCompressorBlowdowns W W6548V3 Is the measurement location prior to or after commingling with non-compressor emission sources [98.236(p)(4)(iv)]. This data element is required. measurementLocation W W6549V3 Count of Reciprocating Compressors [98.236(p)(5)(i)]. This data element is required for facilities in Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting industries. compressorCount W W6550V3 Count of Reciprocating Compressors [98.236(p)(5)(i)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/CompressorCount compressorCount W W6551V3 Total Annual Reciprocating Compressor CO2 Emissions (mt CO2) [98.236(p)(5)(ii)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/TotalAnnualCompressorCarbonDioxideEmissions totalAnnualCompressorCo2Emissions W W6552V3 Total Annual Reciprocating Compressor CO2 Emissions (mt CO2) [98.236(p)(5)(ii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/TotalAnnualCompressorCarbonDioxideEmissions totalAnnualCompressorCo2Emissions W W6553V3 Total Annual Reciprocating Compressor CH4 Emissions (mt CH4) [98.236(p)(5)(iii)]. This data element is required if the number of reciprocating compressors is greater than zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/TotalAnnualCompressorMethaneEmissions totalAnnualCompressorCh4Emissions W W6554V3 Total Annual Reciprocating Compressor CH4 Emissions (mt CH4) [98.236(p)(5)(iii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/TotalAnnualCompressorMethaneEmissions totalAnnualCompressorCh4Emissions W W6559V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorActivityMissingDataProcUsedDetails/ReciprocatingCompressorActivityMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6561V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingCompressorActivityMissingDataProcUsedDetails/ReciprocatingCompressorActivityMissingDataProcUsedRowDetails/MissingHours missingHours W W6567V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingEmissionFactorsMissingDataProcUsedDetails/ReciprocatingEmissionFactorsMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6569V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingEmissionFactorsMissingDataProcUsedDetails/ReciprocatingEmissionFactorsMissingDataProcUsedRowDetails/MissingHours missingHours W W6575V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingLeakOrVentMissingDataProcUsedDetails/ReciprocatingLeakOrVentMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6577V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingLeakOrVentMissingDataProcUsedDetails/ReciprocatingLeakOrVentMissingDataProcUsedRowDetails/MissingHours missingHours W W6582V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingMeasurementMissingDataProcUsedDetails/ReciprocatingMeasurementMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6584V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingMeasurementMissingDataProcUsedDetails/ReciprocatingMeasurementMissingDataProcUsedRowDetails/MissingHours missingHours W W6588V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingPetroleumGasMissingDataProcUsedDetails/ReciprocatingPetroleumGasMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W6590V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingPetroleumGasMissingDataProcUsedDetails/ReciprocatingPetroleumGasMissingDataProcUsedRowDetails/MissingHours missingHours W W6592V3 Mode for each compressor during leak or vent measurement [98.236(o)(3)(i)(E)]. Compressors in "Operating mode" and "Not-operating mode". This data element is required for each vent or leak ID with "as found" measurement sample data. compressorOperatingMode W W6594V3 Mode for each compressor during leak or vent measurement [98.236(p)(3)(i)(E)]. Compressors in "Operating mode", "Standby-pressurized" and "Not-operating mode". This data element is required for each vent or leak ID with "as found" measurement sample data. compressorOperatingMode W W6601V3 Unique Compressor Name or ID [98.236(p)(2)(i)(A)]. This data element is required. uniqueIdentifier W W6602V3 Reciprocating compressor source [98.236(p)(2)(i)(B)]. This data element is required for each reported compressor ID. compessorSource W W6603V3 Compressor ID or Unique Name [98.236(p)(1)(i)]. This data element is required (except for facilities in the Onshore petroleum and natural gas production or the Onshore petroleum and natural gas gathering and boosting industry segments). uniqueIdentifier W W6606V3 Unique Name or ID for leak or vent [98.236(p)(2)(i)(C)]. This leak or vent ID must also be listed in Table P.2.ii. leakOrVentId W W6610V3 Compressor mode [98.236(p)(3)(ii)(A)]. If you used Eq W-23 to calculate emission factors for "As Found" measurement samples, you must report the compressor mode (operating, standby-pressurized, or not-operating-depressurized). This data element is required. compressorMode W W7000V3 This form is required for this industry segment. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/ReciprocatingCompressorsDetails/ReciprocatingPetroleumGasMissingDataProcUsedDetails/ReciprocatingPetroleumGasMissingDataProcUsedRowDetails/MissingHours tableData[1] W W7002V3 mt CO2 [98.236(s)(1)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OffshoreEmissionsDetails/OffshoreEmissionsSourcesDetails/OffshoreEmissionsSourcesRowDetails/CarbonDioxideEmissions co2Emissions W W7003V3 mt CH4 [98.236(s)(2)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OffshoreEmissionsDetails/OffshoreEmissionsSourcesDetails/OffshoreEmissionsSourcesRowDetails/Ch4Emissions ch4Emissions W W7004V3 mt N2O [98.236(s)(3)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OffshoreEmissionsDetails/OffshoreEmissionsSourcesDetails/OffshoreEmissionsSourcesRowDetails/N2OEmissions n2oEmissions W W7500V3 Did the facility use CO2 EOR injection during the calendar year [98.236(w)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OffshoreEmissionsDetails/OffshoreEmissionsSourcesDetails/OffshoreEmissionsSourcesRowDetails/N2OEmissions co2EORDuringCalendarYear W W7501V3 Did any EOR injection pump blowdowns occur at the facility during the calendar year [98.236(w)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OffshoreEmissionsDetails/OffshoreEmissionsSourcesDetails/OffshoreEmissionsSourcesRowDetails/N2OEmissions eorBlowdownsDuringCalendearYear W W7502V3 Were missing data procedures used for any parameters to calculate GHG emissions [98.235]? This data element is required. missingDataProceduresUsed W W7503V3 EOR Injection Pump Blowdown Table. Data is required. co2EORDuringCalendarYear W W7510V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/EorInjectionMissingDataProcUsedDetails/EorInjectionMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W7511V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/EorInjectionMissingDataProcUsedDetails/EorInjectionMissingDataProcUsedRowDetails/MissingHours missingHours W W7512V3 Sub-Basin ID [98.236(w)(1)]. You indicated that the facility used CO2 EOR injection at the facility during the calendar year. This data element is required. subBasinIdentifier W W7513V3 EOR injection pump system identifier [98.236(w)(2)]. This data element is required for the identified sub-basin in this row. eorPumpSystemIdentifier W W7514V3 Pump capacity (barrels per day) [98.236(w)(3)]. This data element is required for the unit in the identified sub-basin in this row. pumpCapacity W W7515V3 Pump capacity (barrels per day) [98.236(w)(3)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/UniqueInjectionPumpBlowdownsDetails/UniqueInjectionPumpBlowdownsRowDetails/PumpCapacity pumpCapacity W W7516V3 Total volume of EOR injection pump system equipment chambers, Vv (cubic feet) [98.236(w)(4)]. This data element is required for the unit in the identified sub-basin in this row. criticalPhaseGasVolume W W7517V3 Total volume of EOR injection pump system equipment chambers, Vv (cubic feet) [98.236(w)(4)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/UniqueInjectionPumpBlowdownsDetails/UniqueInjectionPumpBlowdownsRowDetails/CriticalPhaseGasVolume criticalPhaseGasVolume W W7518V3 Number of blowdowns per year [98.236(w)(5)]. This data element is required for the unit in the identified sub-basin in this row. numberOfBlowdowns W W7519V3 Number of blowdowns per year [98.236(w)(5)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/UniqueInjectionPumpBlowdownsDetails/UniqueInjectionPumpBlowdownsRowDetails/NumberOfBlowdowns numberOfBlowdowns W W7520V3 Density of critical phase EOR injection gas, Rc (kg/ft3) [98.236(w)(6)]. This data element is required for the unit in the identified sub-basin in this row. criticalPhaseGasDensity W W7521V3 Density of critical phase EOR injection gas, Rc (kg/ft3) [98.236(w)(6)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/UniqueInjectionPumpBlowdownsDetails/UniqueInjectionPumpBlowdownsRowDetails/CriticalPhaseGasDensity criticalPhaseGasDensity W W7522V3 Mass fraction of CO2 in critical phase EOR injection gas, GHGCO2 [98.236(w)(7)]. This data element is required for the unit in the identified sub-basin in this row. co2CriticalPhaseMassFraction W W7523V3 Mass fraction of CO2 in critical phase EOR injection gas, GHGCO2 [98.236(w)(7)]. You must enter a numeric value greater than zero and less than one. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/UniqueInjectionPumpBlowdownsDetails/UniqueInjectionPumpBlowdownsRowDetails/Co2CriticalPhaseMassFraction co2CriticalPhaseMassFraction W W7524V3 CO2 emissions (mt CO2) [98.236(w)(8)]. This data element is required for the unit in the identified sub-basin in this row. co2Emissions W W7525V3 CO2 emissions (mt CO2) [98.236(w)(8)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails/UniqueInjectionPumpBlowdownsDetails/UniqueInjectionPumpBlowdownsRowDetails/CarbonDioxideEmissions co2Emissions W W7526V3 The EnhancedOilRecoveryInjectionPumpBlowdownDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails eorInjectionPumpBlowdownData W W7527V3 This form is required for this industry segment. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryInjectionPumpBlowdownDetails tableData[1] W W8000V3 Does the Facility have combustion units subject to reporting under 98.232? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/DoesFacilityHaveCombustionUnits doesFacilityHaveCombustionUnits W W8003V3 Were missing data procedures used for any parameters to calculate GHG emissions [98.235]? This data element is required. missingDataProceduresUsed W W8004V3 Are there external fuel combustion units with a rated heat capacity less than or equal to 5 mmBtu/hr? [98.236(z)(1)(i)]. This data element is required. externalUnitsHeatCapacityLessThanSpecifiedValue W W8005V3 Are there internal fuel combustion units that are not compressor-drivers, with a rated heat capacity less than or equal to 1 mmBtu/hr? [98.236(z)(1)(i)]. This data element is required. internalUnitsHeatCapacityLessThanSpecifiedValue W W8006V3 Total number of combustion units. This data element is required for external combustion units with rated heat capacities less than or equal to 5 MMBtu/hr or for internal combustion units that are not compressor drivers with rated heat capacities less than or equal to 1 MMBtu/hr per 98.236(z)(1)(ii). If this is indeed a substantive error, please correct the error and submit your report. If you believe it to be correct, please submit the value as is. totalNumberOfUnits W W8007V3 Total Number of combustion units meeting 98.236(z)(1) descriptions. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/TotalNumberOfUnits totalNumberOfUnits W W8008V3 Are there external fuel combustion units with a rated heat capacity greater than 5 mmBtu/hr? [98.236(z)(2)(i)]. This data element is required. externalUnitsHeatCapacityGreaterThanSpecifiedValue W W8009V3 Are there internal fuel combustion units that are not compressor-drivers, with a rated heat capacity greater than 1 mmBtu/hr? [98.236(z)(2)(i)]. This data element is required. internalUnitsHeatCapacityGreaterThanSpecifiedValue W W8010V3 Are there Internal fuel combustion units of any heat capacity that are compressor-drivers? [98.236(z)(2)(i)]. This data element is required. compressorDrivenUnits W W8011V3 Type of combustion unit [98.236(z)(2)(i)]. This data element is required. combustionUnitType W W8012V3 Type of fuel combusted [98.236(z)(2)(ii)]. This data element is required. fuelCombustedType W W8013V3 Quantity of fuel combusted in calendar year [98.236(z)(2)(iii)]. This data element is required. quantityOfFuelCombusted W W8014V3 Quantity of fuel combusted in calendar year [98.236(z)(2)(iii)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/LargeCombustionUnitEmissionsDetails/LargeCombustionUnitEmissionsRowDetails/QuantityOfFuelCombusted quantityOfFuelCombusted W W8015V3 Unit of measure [98.236(z)(2)(iii). This data element is required. unitOfMeasure W W8016V3 CO2 Emissions (mt CO2) [98.236(z)(2)(iv)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/LargeCombustionUnitEmissionsDetails/LargeCombustionUnitEmissionsRowDetails/Co2Emissions co2Emissions W W8017V3 CO2 Emissions (mt CO2) [98.236(z)(2)(iv)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/LargeCombustionUnitEmissionsDetails/LargeCombustionUnitEmissionsRowDetails/Co2Emissions co2Emissions W W8018V3 CH4 Emissions (mt CH4) [98.236(z)(2)(v)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/LargeCombustionUnitEmissionsDetails/LargeCombustionUnitEmissionsRowDetails/Ch4Emissions ch4Emissions W W8019V3 CH4 Emissions (mt CH4) [98.236(z)(2)(v)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/LargeCombustionUnitEmissionsDetails/LargeCombustionUnitEmissionsRowDetails/Ch4Emissions ch4Emissions W W8020V3 N2O Emissions (mt N2O)[98.236(z)(2)(vi)]. This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/LargeCombustionUnitEmissionsDetails/LargeCombustionUnitEmissionsRowDetails/N2OEmissions n2oEmissions W W8021V3 N2O Emissions (mt N2O)[98.236(z)(2)(vi)]. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/LargeCombustionUnitEmissionsDetails/LargeCombustionUnitEmissionsRowDetails/N2OEmissions n2oEmissions W W8027V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/CombustionEmissionsMissingDataProcUsedDetails/CombustionEmissionsMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W8029V3 Total number of hours for which missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/CombustionEmissionsDetails/CombustionEmissionsMissingDataProcUsedDetails/CombustionEmissionsMissingDataProcUsedRowDetails/MissingHours missingHours W W8503V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a numeric value greater than or equal to zero and less than or equal to {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails/EorLiquidMissingDataProcUsedDetails/EorLiquidMissingDataProcUsedRowDetails/MissingHours missingHours W W8506V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails/EorLiquidMissingDataProcUsedDetails/EorLiquidMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W8508V3 Does the facility have hydrocarbon liquids that were produced from enhanced oil recovery operations subject to reporting under 98.232 [98.236(x)]? This data element is required. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails/DoesFacilityHaveEorLiquidsDissolved doesFacilityHaveEorLiquidsDissolved W W8509V3 Were missing data procedures used for any parameters to calculate GHG emissions [98.235]? This data element is required. missingDataProceduresUsed W W8510V3 EOR Liquids Dissolved CO2 Table. Data is required. tableData[1] W W8512V3 Average CO2 retained in hydrocarbon liquids, Shl (mt CO2 per barrel) [98.236(x)(3)]. This data element is required for the identified sub-basin. co2Retained W W8513V3 Average CO2 retained in hydrocarbon liquids, Shl (mt CO2 per barrel) [98.236(x)(3)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails/HydrocarbonLiquidsDissolvedDetails/HydrocarbonLiquidsDissolvedSubBasinRowDetails/CarbonDioxideRetained co2Retained W W8514V3 Volume of hydrocarbon liquid produced, Vhl (barrels per year) [98.236(x)(2)]. This data element is required for the identified sub-basin. crudeOilProduced W W8515V3 Volume of hydrocarbon liquid produced, Vhl (barrels per year) [98.236(x)(2)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails/HydrocarbonLiquidsDissolvedDetails/HydrocarbonLiquidsDissolvedSubBasinRowDetails/CrudeOilProduced crudeOilProduced W W8517V3 Annual CO2 emissions retained, MassCO2 (mt CO2) [98.236(x)(4)]. This data element is required for the reported sub-basin. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails/HydrocarbonLiquidsDissolvedDetails/HydrocarbonLiquidsDissolvedSubBasinRowDetails/CarbonDioxideEmissions co2Emissions W W8518V3 Annual CO2 emissions retained, MassCO2 (mt CO2) [98.236(x)(4)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails/HydrocarbonLiquidsDissolvedDetails/HydrocarbonLiquidsDissolvedSubBasinRowDetails/CarbonDioxideEmissions co2Emissions W W8519V3 Sub Basin ID [98.236(x)(1)]. This data element is required. subBasinIdentifier W W8520V3 The EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails node is required for the selected industry segment. The submitted XML omits this node. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/EnhancedOilRecoveryHydrocarbonLiquidsDissolvedDetails eorLiquidsDissolvedData W W8529V3 Were plunger lifts used [98.236(f)(2)(iii)]? You indicated that Calculation Methodology 2 or 3 was used. This data element is required. plungerLiftsUsed W W9003V3b Did this facility use leak surveys to calculate emissions from equipment leaks in accordance with 98.232 [per 98.236(q)]? This data element is required for facilities in the Onshore natural gas processing, Onshore natural gas transmission compression, Underground natural gas storage, Liquefied natural gas storage, LNG import and export equipment, Natural gas distribution industries, Onshore petroleum and natural gas production, and Onshore petroleum and natural gas gathering and boosting. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/EquipmentLeaksViaSurveys equipmentLeaksViaSurveys W W9004V3b Were missing data procedures used for any parameters to calculate GHG emissions? This data element is required. missingDataProceduresUsed W W9005V3 (q,r) Equipment Leaks. This form is required for this industry segment. transientData['doesTabQRHaveData'] W W9007V3 Total number of above grade T-D transfer stations surveyed in calendar year [98.236(q)(3)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalTransferedStationsSurveyedInYear totalTransferStationsSurveyedInYear W W9008V3b Did this facility use population counts to calculate emissions from equipment leaks in accordance with 98.232 [per 98.236(r)]? This data element is required for facilities in the Onshore petroleum and natural gas production, Underground natural gas storage, Liquefied natural gas storage, LNG import and export equipment, Natural Gas Distribution, and Onshore petroleum and natural gas gathering and boosting industries. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/EquipmentLeaksViaPopulationCounts equipmentLeaksViaPopulationCounts W W9009V3b Number of complete equipment leak surveys performed during the calendar year [98.236(q)(1)(i)]. This data element is required for facilities reporting emission leaks via surveys. totalEquipmentLeaksDuringYear W W9010V3 Number of complete equipment leak surveys performed during the calendar year [98.236(q)(1)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalEquipmentLeaksDuringYear totalEquipmentLeaksDuringYear W W9012V3 For Natural gas distribution facilities conducting multi-year surveys, number of years in the leak survey cycle [98.236(q)(1)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/NumberYearsInSurveyCycle numberYearsInSurveyCycle W W9015V3 Total number of surveyed component type identified as leaking [98.236(q)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasProcessingEmissionsFactorsDetails/GasProcessingEmissionsFactorsRowDetails/TotalLeakingComponentTypes totalLeakingComponentTypes W W9017V3 Average time the surveyed components are assumed to be leaking and operational [98.236(q)(2)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasProcessingEmissionsFactorsDetails/GasProcessingEmissionsFactorsRowDetails/AverageTimeComponentsSurveyed averageTimeComponentsSurveyed W W9018V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. This data element is required for Onshore natural gas processing facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasProcessingEmissionsFactorsDetails/GasProcessingEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9019V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasProcessingEmissionsFactorsDetails/GasProcessingEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9020V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. This data element is required for Onshore natural gas processing facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasProcessingEmissionsFactorsDetails/GasProcessingEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9021V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasProcessingEmissionsFactorsDetails/GasProcessingEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9024V3 Total number of surveyed component type identified as leaking [98.236(q)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasTransmissionCompressionEmissionFactorsDetails/GasTransmissionCompressionEmissionFactorsRowDetails/TotalLeakingComponentTypes totalLeakingComponentTypes W W9026V3 Average time the surveyed components are assumed to be leaking and operational [98.236(q)(2)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasTransmissionCompressionEmissionFactorsDetails/GasTransmissionCompressionEmissionFactorsRowDetails/AverageTimeComponentsSurveyed averageTimeComponentsSurveyed W W9027V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. This data element is required for Onshore natural gas transmission compression facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasTransmissionCompressionEmissionFactorsDetails/GasTransmissionCompressionEmissionFactorsRowDetails/Co2Emissions co2Emissions W W9028V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasTransmissionCompressionEmissionFactorsDetails/GasTransmissionCompressionEmissionFactorsRowDetails/Co2Emissions co2Emissions W W9029V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. This data element is required for Onshore natural gas transmission compression facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasTransmissionCompressionEmissionFactorsDetails/GasTransmissionCompressionEmissionFactorsRowDetails/Ch4Emissions ch4Emissions W W9030V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasTransmissionCompressionEmissionFactorsDetails/GasTransmissionCompressionEmissionFactorsRowDetails/Ch4Emissions ch4Emissions W W9033V3 Total number of surveyed component type identified as leaking [98.236(q)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/UndergroundStorageEmissionsFactorsDetails/UndergroundStorageEmissionsFactorsRowDetails/TotalLeakingComponentTypes totalLeakingComponentTypes W W9035V3 Average time the surveyed components are assumed to be leaking and operational [98.236(q)(2)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/UndergroundStorageEmissionsFactorsDetails/UndergroundStorageEmissionsFactorsRowDetails/AverageTimeComponentsSurveyed averageTimeComponentsSurveyed W W9036V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. This data element is required for Underground natural gas storage facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/UndergroundStorageEmissionsFactorsDetails/UndergroundStorageEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9037V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/UndergroundStorageEmissionsFactorsDetails/UndergroundStorageEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9038V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. This data element is required for Underground natural gas storage facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/UndergroundStorageEmissionsFactorsDetails/UndergroundStorageEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9039V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/UndergroundStorageEmissionsFactorsDetails/UndergroundStorageEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9042V3 Total number of surveyed component type identified as leaking [98.236(q)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEmissionsFactorsDetails/LngStorageEmissionsFactorsRowDetails/TotalLeakingComponentTypes totalLeakingComponentTypes W W9044V3 Average time the surveyed components are assumed to be leaking and operational [98.236(q)(2)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEmissionsFactorsDetails/LngStorageEmissionsFactorsRowDetails/AverageTimeComponentsSurveyed averageTimeComponentsSurveyed W W9045V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. This data element is required for LNG storage facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEmissionsFactorsDetails/LngStorageEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9046V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEmissionsFactorsDetails/LngStorageEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9047V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. This data element is required for LNG storage facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEmissionsFactorsDetails/LngStorageEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9048V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEmissionsFactorsDetails/LngStorageEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9051V3 Total number of surveyed component type identified as leaking [98.236(q)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ImportExportEmissionsFactorsDetails/ImportExportEmissionsFactorsRowDetails/TotalLeakingComponentTypes totalLeakingComponentTypes W W9053V3 Average time the surveyed components are assumed to be leaking and operational [98.236(q)(2)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ImportExportEmissionsFactorsDetails/ImportExportEmissionsFactorsRowDetails/AverageTimeComponentsSurveyed averageTimeComponentsSurveyed W W9054V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. This data element is required for LNG import and export equipment facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ImportExportEmissionsFactorsDetails/ImportExportEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9055V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ImportExportEmissionsFactorsDetails/ImportExportEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9056V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. This data element is required for LNG import and export equipment facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ImportExportEmissionsFactorsDetails/ImportExportEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9057V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ImportExportEmissionsFactorsDetails/ImportExportEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9060V3 Total number of surveyed component type identified as leaking [98.236(q)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionEmissionsFactorsDetails/GasDistributionEmissionsFactorsRowDetails/TotalLeakingComponentTypes totalLeakingComponentTypes W W9062V3 Average time the surveyed components are assumed to be leaking and operational [98.236(q)(2)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionEmissionsFactorsDetails/GasDistributionEmissionsFactorsRowDetails/AverageTimeComponentsSurveyed averageTimeComponentsSurveyed W W9063V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. This data element is required for Natural gas distribution facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionEmissionsFactorsDetails/GasDistributionEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9064V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionEmissionsFactorsDetails/GasDistributionEmissionsFactorsRowDetails/Co2Emissions co2Emissions W W9065V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. This data element is required for Natural gas distribution facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionEmissionsFactorsDetails/GasDistributionEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9066V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionEmissionsFactorsDetails/GasDistributionEmissionsFactorsRowDetails/Ch4Emissions ch4Emissions W W9068V3 Number of meter/regulator runs at above grade T-D transfer stations surveyed in the calendar year [98.236(q)(3)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalRunsSurveyedInYear totalRunsSurveyedInYear W W9070V3 Average time meter/regulator runs surveyed in calendar year were operational [98.236(q)(3)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/AverageHoursRunsSurveyedInYear averageHoursRunsSurveyedInYear W W9072V3 Total number of above grade T-D transfer stations surveyed in current leak survey cycle [98.236(q)(3)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalTransferStationsSurveyedInCycle totalTransferStationsSurveyedInCycle W W9074V3 Average time meter/regulator runs surveyed in current leak survey cycle were operational [98.236(q)(3)(vi)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/AverageHoursRunsSurveyedInCycle averageHoursRunsSurveyedInCycle W W9076V3 Meter/regulator run CO2 emission factor based on all surveyed T-D transfer stations in current leak cycle [98.236(q)(3)(vii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MeterRunCO2EmissionFactor meterRunCO2EmissionFactor W W9078V3 Number of meter/regulator runs at above grade T-D transfer stations surveyed in current leak survey cycle [98.236(q)(3)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalRunsSurveyedInCycle totalRunsSurveyedInCycle W W9080V3 Meter/regulator run CH4 emission factor based on all surveyed T-D transfer stations in current leak cycle [98.236(q)(3)(viii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MeterRunCH44EmissionFactor meterRunCH44EmissionFactor W W9083V3 Total number of meter/regulator runs at above grade T-D transfer stations [98.236(q)(3)(ix)(A)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalNumberRuns totalNumberRuns W W9085V3 Average estimated time that each meter/regulator run at above grade T-D transfer stations was operational in the calendar year [98.236(q)(3)(ix)(B)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/AverageTimeOperational averageTimeOperational W W9086V3 Annual CO2 emissions from all above grade T-D transfer stations combined [98.236(q)(3)(ix)(C)]. This data element is required for Natural gas distribution facilities that perform equipment leak surveys across multiple year leak survey cycles. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/AnnualCO2Emissions annualCO2Emissions W W9087V3 Annual CO2 emissions from all above grade T-D transfer stations combined [98.236(q)(3)(ix)(C)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/AnnualCO2Emissions annualCO2Emissions W W9088V3 Annual CH4 emissions from all above grade T-D transfer stations combined [98.236(q)(3)(ix)(D)]. This data element is required for Natural gas distribution facilities that perform equipment leak surveys across multiple year leak survey cycles. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/AnnualCH4Emissions annualCH4Emissions W W9089V3 Annual CH4 emissions from all above grade T-D transfer stations combined [98.236(q)(3)(ix)(D)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/AnnualCH4Emissions annualCH4Emissions W W9096V3 Average estimated time that the emission source type was operational in the calendar year [98.236(r)(1)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LeaksCalculatedWithCountsFactorsDetails/LeaksCalculatedWithCountsFactorsRowDetails/AverageTimeOperational averageTimeOperational W W9097V3b CO2 emissions [98.236(r)(1)(iv)]. This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities for each specified emission source type. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LeaksCalculatedWithCountsFactorsDetails/LeaksCalculatedWithCountsFactorsRowDetails/Co2Emissions co2Emissions W W9098V3 CO2 emissions [98.236(r)(1)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LeaksCalculatedWithCountsFactorsDetails/LeaksCalculatedWithCountsFactorsRowDetails/Co2Emissions co2Emissions W W9099V3b CH4 emissions [98.236(r)(1)(v)]. This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities for each specified emission source type. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LeaksCalculatedWithCountsFactorsDetails/LeaksCalculatedWithCountsFactorsRowDetails/Ch4Emissions ch4Emissions W W9100V3 CH4 emissions [98.236(r)(1)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LeaksCalculatedWithCountsFactorsDetails/LeaksCalculatedWithCountsFactorsRowDetails/Ch4Emissions ch4Emissions W W9103V3 Total number of emission source type [98.236(r)(1)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasEstimatingEmissionsDetails/GasEstimatingEmissionsRowDetails/SourceTypeCount sourceTypeCount W W9105V3 Average estimated time that the emission source type was operational in the calendar year [98.236(r)(1)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasEstimatingEmissionsDetails/GasEstimatingEmissionsRowDetails/AverageTimeTypeOperational averageTimeTypeOperational W W9107V3 CO2 emissions [98.236(r)(1)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasEstimatingEmissionsDetails/GasEstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9109V3 CH4 emissions [98.236(r)(1)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasEstimatingEmissionsDetails/GasEstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9112V3 Total number of emission source type [98.236(r)(1)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEstimatingEmissionsDetails/LngStorageEstimatingEmissionsRowDetails/SourceTypeCount sourceTypeCount W W9114V3 Average estimated time that the emission source type was operational in the calendar year [98.236(r)(1)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEstimatingEmissionsDetails/LngStorageEstimatingEmissionsRowDetails/AverageTimeTypeOperational averageTimeTypeOperational W W9116V3 CO2 emissions [98.236(r)(1)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEstimatingEmissionsDetails/LngStorageEstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9118V3 CH4 emissions [98.236(r)(1)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEstimatingEmissionsDetails/LngStorageEstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9120V3 Total number of emission source type [98.236(r)(1)(ii)]. This data element is required for Natural gas distribution facilities with below grade T-D stations. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngStorageEstimatingEmissionsDetails/LngStorageEstimatingEmissionsRowDetails/Ch4Emissions sourceTypeCount W W9121V3 Total number of emission source type [98.236(r)(1)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionTDEstimatingEmissionsDetails/GasDistributionTDEstimatingEmissionsRowDetails/SourceTypeCount sourceTypeCount W W9123V3 Average estimated time that the emission source type was operational in the calendar year [98.236(r)(1)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionTDEstimatingEmissionsDetails/GasDistributionTDEstimatingEmissionsRowDetails/AverageTimeTypeOperational averageTimeTypeOperational W W9124V3 CO2 emissions [98.236(r)(1)(iv)]. This data element is required for Natural gas distribution facilities with below grade T-D stations. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionTDEstimatingEmissionsDetails/GasDistributionTDEstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9125V3 CO2 emissions [98.236(r)(1)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionTDEstimatingEmissionsDetails/GasDistributionTDEstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9126V3 CH4 emissions [98.236(r)(1)(v)]. This data element is required for Natural gas distribution facilities with below grade T-D stations. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionTDEstimatingEmissionsDetails/GasDistributionTDEstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9127V3 CH4 emissions [98.236(r)(1)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionTDEstimatingEmissionsDetails/GasDistributionTDEstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9129V3 Total number of emission source type [98.236(r)(1)(ii)]. This data element is required for Natural gas distribution facilities with below grade M-R stations. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionTDEstimatingEmissionsDetails/GasDistributionTDEstimatingEmissionsRowDetails/Ch4Emissions sourceTypeCount W W9130V3 Total number of emission source type [98.236(r)(1)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionMREstimatingEmissionsDetails/GasDistributionMREstimatingEmissionsRowDetails/SourceTypeCount sourceTypeCount W W9132V3 Average estimated time that the emission source type was operational in the calendar year [98.236(r)(1)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionMREstimatingEmissionsDetails/GasDistributionMREstimatingEmissionsRowDetails/AverageTimeTypeOperational averageTimeTypeOperational W W9133V3 CO2 emissions [98.236(r)(1)(iv)]. This data element is required for Natural gas distribution facilities with below grade M-R stations. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionMREstimatingEmissionsDetails/GasDistributionMREstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9134V3 CO2 emissions [98.236(r)(1)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionMREstimatingEmissionsDetails/GasDistributionMREstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9135V3 CH4 emissions [98.236(r)(1)(v)]. This data element is required for Natural gas distribution facilities with below grade M-R stations. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionMREstimatingEmissionsDetails/GasDistributionMREstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9136V3 CH4 emissions [98.236(r)(1)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionMREstimatingEmissionsDetails/GasDistributionMREstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9138V3 Total number of emission source type [98.236(r)(1)(ii)]. This data element is required for Natural gas distribution facilities reporting \'distribution main equipment\'. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/GasDistributionMREstimatingEmissionsDetails/GasDistributionMREstimatingEmissionsRowDetails/Ch4Emissions sourceTypeCount W W9139V3 Total number of emission source type [98.236(r)(1)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MainGasDistributionEstimatingEmissionsDetails/MainGasDistributionEstimatingEmissionsRowDetails/SourceTypeCount sourceTypeCount W W9141V3 Average estimated time that the emission source type was operational in the calendar year [98.236(r)(1)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MainGasDistributionEstimatingEmissionsDetails/MainGasDistributionEstimatingEmissionsRowDetails/AverageTimeTypeOperational averageTimeTypeOperational W W9142V3 CO2 emissions [98.236(r)(1)(iv)]. This data element is required for Natural gas distribution facilities reporting \'distribution main equipment\'. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MainGasDistributionEstimatingEmissionsDetails/MainGasDistributionEstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9143V3 CO2 emissions [98.236(r)(1)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MainGasDistributionEstimatingEmissionsDetails/MainGasDistributionEstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9144V3 CH4 emissions [98.236(r)(1)(v)]. This data element is required for Natural gas distribution facilities reporting \'distribution main equipment\'. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MainGasDistributionEstimatingEmissionsDetails/MainGasDistributionEstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9145V3 CH4 emissions [98.236(r)(1)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MainGasDistributionEstimatingEmissionsDetails/MainGasDistributionEstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9147V3 Total number of emission source type [98.236(r)(1)(ii)]. This data element is required for Natural gas distribution facilities reporting \'distribution services equipment\'. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MainGasDistributionEstimatingEmissionsDetails/MainGasDistributionEstimatingEmissionsRowDetails/Ch4Emissions sourceTypeCount W W9148V3 Total number of emission source type [98.236(r)(1)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ServicesGasDistributionEstimatingEmissionsDetails/ServicesGasDistributionEstimatingEmissionsRowDetails/SourceTypeCount sourceTypeCount W W9150V3 Average estimated time that the emission source type was operational in the calendar year [98.236(r)(1)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ServicesGasDistributionEstimatingEmissionsDetails/ServicesGasDistributionEstimatingEmissionsRowDetails/AverageTimeTypeOperational averageTimeTypeOperational W W9151V3 CO2 emissions [98.236(r)(1)(iv)]. This data element is required for Natural gas distribution facilities reporting \'distribution services equipment\'. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ServicesGasDistributionEstimatingEmissionsDetails/ServicesGasDistributionEstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9152V3 CO2 emissions [98.236(r)(1)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ServicesGasDistributionEstimatingEmissionsDetails/ServicesGasDistributionEstimatingEmissionsRowDetails/Co2Emissions co2Emissions W W9153V3 CH4 emissions [98.236(r)(1)(v)]. This data element is required for Natural gas distribution facilities reporting \'distribution services equipment\'. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ServicesGasDistributionEstimatingEmissionsDetails/ServicesGasDistributionEstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9154V3 CH4 emissions [98.236(r)(1)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ServicesGasDistributionEstimatingEmissionsDetails/ServicesGasDistributionEstimatingEmissionsRowDetails/Ch4Emissions ch4Emissions W W9155V3 Number of above grade T-D transfer at the facility [98.236(r)(2)(i)]. This data element is required for Natural gas distribution facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ServicesGasDistributionEstimatingEmissionsDetails/ServicesGasDistributionEstimatingEmissionsRowDetails/Ch4Emissions totalTDFacilityStations W W9156V3 Total number of above grade T-D transfer stations at the facility [98.236(r)(2)(i)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalTDFacilityStations totalTDFacilityStations W W9157V3 Number of above grade metering-regulating stations that are not T-D transfer stations [98.236(r)(2)(ii)]. This data element is required for Natural gas distribution facilities. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalTDFacilityStations totalNonTDFacilityStations W W9158V3 Number of above grade metering-regulating stations that are not T-D transfer stations [98.236(r)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalNonTDFacilityStations totalNonTDFacilityStations W W9160V3 Number of meter/regulator runs at above grade metering-regulating stations that are not above grade T-D transfer stations [98.236(r)(2)(iii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/TotalRunsNonTDStations totalRunsNonTDStations W W9162V3 Average estimated time that each meter/regulator run at above grade metering-regulating stations that are not above grade T-D transfer stations was operational in the calendar year [98.236(r)(2)(iv)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/AverageNonTDTimeOperational averageNonTDTimeOperational W W9163V3 Annual CO2 emissions from above grade metering-regulating stations that are not above grade T-D transfer stations [98.236(r)(2)(v)(A)]. This data element is required for Natural gas distribution facilities with above grade metering-regulating stations that are not above grade T-D transfer stations AND above grade T-D transfer stations. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/NonTDco2Emissions nonTDco2Emissions W W9164V3 Annual CO2 emissions from above grade metering-regulating stations that are not above grade T-D transfer stations [98.236(r)(2)(v)(A)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/NonTDco2Emissions nonTDco2Emissions W W9165V3 Annual CH4 emissions from above grade metering-regulating stations that are not above grade T-D transfer stations [98.236(r)(2)(v)(B)]. This data element is required for Natural gas distribution facilities with above grade metering-regulating stations that are not above grade T-D transfer stations AND above grade T-D transfer stations. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/NonTDch4Emissions nonTDch4Emissions W W9166V3 Annual CH4 emissions from above grade metering-regulating stations that are not above grade T-D transfer stations [98.236(r)(2)(v)(B)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/NonTDch4Emissions nonTDch4Emissions W W9167V3 Calculation method [98.236(r)(3)(i)]. This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities. equipmentTypeCalcMethod W W9169V3 Major equipment type present? [98.236(r)(3)(ii)(A)]. This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities with natural gas production equipment. equipmentPresent W W9172V3 Count of major equipment in Eastern US [98.236(r)(3)(ii)(B)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MajorGasEquipmentTypeDetails/MajorGasEquipmentTypeRowDetails/EquipmentTypeCountEastern equipmentTypeCountEastern W W9174V3 Major equipment type present? 98.236(r)(3)(ii)(A)]. This data element is required for Onshore petroleum and natural gas production facilities with crude oil production equipment. equipmentPresent W W9177V3 Count of major equipment in Eastern US [98.236(r)(3)(ii)(B)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MajorOilEquipmentTypeDetails/MajorOilEquipmentTypeRowDetails/EquipmentTypeCountEastern equipmentTypeCountEastern W W9180V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ComponentEmissionsFactorsMissingDataProcUsedDetails/ComponentEmissionsFactorsMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W9182V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/ComponentEmissionsFactorsMissingDataProcUsedDetails/ComponentEmissionsFactorsMissingDataProcUsedRowDetails/MissingHours missingHours W W9190V3 Number of quarters for which missing data procedures were used. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/EquipmentLeaksCountsFactorsMissingDataProcUsedDetails/EquipmentLeaksCountsFactorsMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W9192V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used [98.3(c)(8)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/EquipmentLeaksCountsFactorsMissingDataProcUsedDetails/EquipmentLeaksCountsFactorsMissingDataProcUsedRowDetails/MissingHours missingHours W W9197V3 Number of quarters for which missing data procedures were used [98.236(bb)(1)]. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/EmissionsComponentTypeMissingDataProcUsedDetails/EmissionsComponentTypeMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W9199V3 Total number of hours for which missing data procedures were used [98.3(c)(8)]. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/EmissionsComponentTypeMissingDataProcUsedDetails/EmissionsComponentTypeMissingDataProcUsedRowDetails/MissingHours missingHours W W9203V3 Number of quarters for which missing data procedures were used [98.236(bb)(1)]. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/EquipmentLeaksGasMissingDataProcUsedDetails/EquipmentLeaksGasMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W9205V3 Total number of hours for which missing data procedures were used [98.3(c)(8)]. You indicated that missing data procedures were used. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/EquipmentLeaksGasMissingDataProcUsedDetails/EquipmentLeaksGasMissingDataProcUsedRowDetails/MissingHours missingHours W W9211V3 Number of quarters for which missing data procedures were used [98.236(bb)(1)]. You indicated that missing data procedures were used. You must enter a value between one and four. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MajorEquipmentMissingDataProcUsedDetails/MajorEquipmentMissingDataProcUsedRowDetails/MissingQuarters missingQuarters W W9213V3 Total number of hours for which missing data procedures were used. You indicated that missing data procedures were used [98.236(bb)(2)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MajorEquipmentMissingDataProcUsedDetails/MajorEquipmentMissingDataProcUsedRowDetails/MissingHours missingHours W W9226V3 The sum of CO2 emissions from all Offshore Production Emission Sources did not equal the reported Offshore Production Emission Sources CO2 emission roll-up total. Please check your Offshore Production Emission Sources roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngImportExportEstimatingEmissionsDetails/LngImportExportEstimatingEmissionsRowDetails/Ch4Emissions totalCo2Emissions W W9227V3 The sum of CH4 emissions from all Offshore Production Emission Sources did not equal the reported Offshore Production Emission Sources CH4 emission roll-up total. Please check your Offshore Production Emission Sources roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngImportExportEstimatingEmissionsDetails/LngImportExportEstimatingEmissionsRowDetails/Ch4Emissions totalCh4MetricTonsEmissions W W9228V3 The sum of N2O emissions from all Offshore Production Emission Sources did not equal the reported Offshore Production Emission Sources N2O emission roll-up total. Please check your Offshore Production Emission Sources roll-up calculation for accuracy. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/LngImportExportEstimatingEmissionsDetails/LngImportExportEstimatingEmissionsRowDetails/Ch4Emissions totalN2OMetricTonsEmissions W W9229V3 Count of major equipment in Western US [98.236(r)(3)(ii)(B)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MajorOilEquipmentTypeDetails/MajorOilEquipmentTypeRowDetails/EquipmentTypeCountWestern equipmentTypeCountWestern W W9232V3 The reported CH4 and CO2 emissions from pipeline services {1} are included, but inputs data is not reported. Please review the input data (i.e., number of services or average estimated time the emission source type was operational) reported. If this is an error, please correct the value. If it is correct, please submit the value as is. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MajorOilEquipmentTypeDetails/MajorOilEquipmentTypeRowDetails/EquipmentTypeCountWestern sourceTypeCount W W9241V3 Count of major equipment in Western US [98.236(r)(3)(ii)(B)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/MajorGasEquipmentTypeDetails/MajorGasEquipmentTypeRowDetails/EquipmentTypeCountWestern equipmentTypeCountWestern W W9250V3 Did the facility elect to comply with 98.236(q) according to 98.233(q)(1)(iv) for any components at the facility [per 98.236(q)(1)(iv)]? This data element is required for facilities in the Onshore petroleum and natural gas production, Onshore natural gas transmission compression, Underground natural gas storage, Liquefied natural gas storage, LNG import and export equipment, and Onshore petroleum and natural gas gathering and boosting industries. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/DidFacilityElectToComplyWith98236Q didFacilityElectToComplyWith98236Q W W9267V3 Total number of surveyed component type identified as leaking [98.236(q)(2)(ii)]. You reported nonzero emissions or an average time the surveyed components are assumed to be leaking and operational, but did not provide the total number of surveyed component type identified as leaking for {1}. Please review these reported values and correct, as necessary. totalLeakingComponentTypes W W9268V3 Total number of surveyed component type identified as leaking [98.236(q)(2)(ii)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/DidFacilityElectToComplyWith98236Q totalLeakingComponentTypes W W9270V3 Average time the surveyed components are assumed to be leaking and operational [98.236(q)(2)(iii)]. You must enter a value between 0 and {1}. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/DidFacilityElectToComplyWith98236Q averageTimeComponentsSurveyed W W9271V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/DidFacilityElectToComplyWith98236Q co2Emissions W W9272V3 CO2 emissions (surveyed components identified as leaking only) [98.236(q)(2)(iv)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/DidFacilityElectToComplyWith98236Q co2Emissions W W9273V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. This data element is required for Onshore petroleum and natural gas production and Onshore petroleum and natural gas gathering and boosting facilities reporting emission leaks via surveys. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/DidFacilityElectToComplyWith98236Q ch4Emissions W W9274V3 CH4 emissions (surveyed components identified as leaking only) [98.236(q)(2)(v)]. You must enter a value that is greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OtherEmissionsFromEquipmentLeaksDetails/DidFacilityElectToComplyWith98236Q ch4Emissions W W9500V3 Sub-basin ID. This data element is required. subBasinIdentifier W W9502V3 Quantity of gas produced from wells. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/GasProducedCalendarYearFromWells gasProducedCalendarYearFromWells W W9503V3 Quantity of gas produced for sales. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/GasProducedCalendarYearForSales gasProducedCalendarYearForSales W W9504V3 Quantity of crude oil and condensate produced for sales. You must enter a numeric value greater than or equal to zero. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/OilProducedCalendarYearForSales oilProducedCalendarYearForSales W W9561V3 Table AA.1.i Onshore petroleum and natural gas production: Basin Characterization. This table is required for the Onshore petroleum and natural gas production segment. basinAssociatedWithFacility W W9562V3 Table AA.1.ii Onshore petroleum and natural gas production: Sub-Basin Characterization. This table is required for the Onshore petroleum and natural gas production segment. tableData W W9563V3 Table AA.1.iii Onshore petroleum and natural gas production: Well Characterization. 98.236(aa)(1)(iii). This table is required for the Onshore petroleum and natural gas production segment. onshoreWellCharacterization W W9581V3 Select the Basin associated with this facility [98.236(aa)(10)]. This data element is required. basinAssociatedWithFacility W W9583V3 Quantity of gas received [98.236(aa)(10)(i)]. This data element is required for gathering and boosting facilities. quantityGasReceived W W9585V3 Quantity of gas transported [98.236(aa)(10)(ii)]. This data element is required for gathering and boosting facilities. quantityGasTransported W W9587V3 Quantity of hydrocarbon liquids received [98.236(aa)(10)(iii)]. This data element is required for gathering and boosting facilities. quantityOfHydrocarbonLiquidsReceived W W9589V3 Quantity of hydrocarbon liquids transported [98.236(aa)(10)(iv)]. This data element is required for gathering and boosting facilities. quantityOfHydrocarbonLiquidsTransported W W9591V3 Quantity of natural gas received at custody transfer stations [98.236(aa)(11)(i)]. This data element is required. quantityNaturalGasReceived W W9593V3 Quantity of natural gas withdrawn from in-system storage [98.236(aa)(11)(ii)]. This data element is required. quantityNaturalGasWithdrawn W W9595V3 Quantity of natural gas added to in-system storage [98.236(aa)(11)(iii)]. This data element is required. quantityNaturalGasAdded W W9597V3 Quantity of natural gas transferred to third parties [98.236(aa)(11)(iv)]. This data element is required. quantityNaturalGasTransferred W W9599V3 Quantity of natural gas consumed [98.236(aa)(11)(v)]. This data element is required. quantityNaturalGasConsumed W W9601V3 State [98.236(aa)(11)(vi)]. No states were selected for this facility. This data element is required for this industry segment. state W W9603V3 Miles of transmission pipeline [98.236(aa)(11)(vi)]. This data element is required for each reported state. milesOfOnshoreNaturalGasTransmissionPipeline W W9605V3 Onshore Petroleum and Natural Gas Gathering and Boosting Table. Data is required. onshorePetrNatGasGatheringBoostingTableData[1] W W9606V3 Onshore Natural Gas Transmission Pipeline Facilities Table. Data is required. onshoreNatGasTransmPipelineTableData[1] W W9607V3 Onshore Natural Gas Transmission Pipeline Miles for Each State Table. Data is required. onshoreNatGasTransmPipelineMilesEachStateTableData[1] W W9609V3 Were missing data procedures used for any parameters to calculate GHG emissions? This data element is required. missingDataProceduresUsed W W9766V3 ReportingCategory. [{1}] is not a valid emission source type and rule citation for the current reporting year. Please ensure you are using the current emission source type names and rule citations. The current acceptable enumerations for this data element can be found in the schema definitions file under "reportingCategory". GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/MissingDataProceduresTableDetails/MissingDataProceduresTableRowDetails/NumberOfHours reportingCategory W W9770V3 Missing Data Procedures Table. You indicated that missing data procedures were used for transmission tanks, but you have not entered any data in Table K.2 or XPATH TransmissionStorageMissingDataProcUsedDetails. These data are required if missing data procedures were used. transmissionTanksSubjectToReporting W W9772V3 CO2 emissions [98.236(r)(1)(iv)]. This data element is required for Underground natural gas storage facilities if the facility used population counts to calculate emissions from equipment leaks. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/MissingDataProceduresTableDetails/MissingDataProceduresTableRowDetails/NumberOfHours co2Emissions W W9773V3 CH4 emissions [98.236(r)(1)(v)]. This data element is required for Underground natural gas storage facilities if the facility used population counts to calculate emissions from equipment leaks. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/MissingDataProceduresTableDetails/MissingDataProceduresTableRowDetails/NumberOfHours ch4Emissions W W9775V3 CO2 emissions [98.236(r)(1)(iv)]. This data element is required for LNG storage facilities if the facility used population counts to calculate emissions from equipment leaks. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/MissingDataProceduresTableDetails/MissingDataProceduresTableRowDetails/NumberOfHours co2Emissions W W9776V3 CH4 emissions [98.236(r)(1)(v)]. This data element is required for LNG storage facilities if the facility used population counts to calculate emissions from equipment leaks. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/MissingDataProceduresTableDetails/MissingDataProceduresTableRowDetails/NumberOfHours ch4Emissions W W9778V3 CO2 emissions [98.236(r)(1)(iv)]. This data element is required for LNG import and export facilities if the facility used population counts to calculate emissions from equipment leaks. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/MissingDataProceduresTableDetails/MissingDataProceduresTableRowDetails/NumberOfHours co2Emissions W W9779V3 CH4 emissions [98.236(r)(1)(v)]. This data element is required for LNG import and export facilities if the facility used population counts to calculate emissions from equipment leaks. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/MissingDataProceduresTableDetails/MissingDataProceduresTableRowDetails/NumberOfHours ch4Emissions W W9785V3 The {1} industry segment was reported in addition to another industry segment. The facility definition for {1} is exclusive from the other industry segments. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartW/SubPartWReportingFormsDetails/OnshoreRequirementsDetails/MissingDataProceduresTableDetails/MissingDataProceduresTableRowDetails/NumberOfHours selectedIndustrySegmentNumber X ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] X ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] X CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML X CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits X CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml X CML-027 Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions X CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions X CML-028 Fraction of nitrous oxide emissions from CML. The decimal fraction must be between 0 and 1. fractionN2oEmissions X CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs X CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt X CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow X CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture X CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow X CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits X CML-047 Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions X CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions X CML-049 Fraction of methane emissions from CML. The decimal fraction must be between 0 and 1. fractionCh4Emissions X CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission X CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission X CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission X CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission X CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> X CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 X CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs X CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt X CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate X CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate X CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType X CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate X CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] X CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] X CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] X CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] X CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] X CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] X CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] X CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] X CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName X CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted X CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission X CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission X CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted X CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions X CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate X CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate X CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate X CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate X IVT-X019v Average carbon content of liquid feedstock for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContent X IVT-X043v Average carbon content of liquid product for [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. carbonContent X UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName X UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType X X005 Type of petrochemical produced. This data element is required. typeOfPetrochemicalProduced X X006 Annual quantity of the petrochemical produced. This data element is required. annualPetrochemicalProduced X X007 Annual quantity of the petrochemical produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualPetrochemicalProduced X X014 Annual average flow of wastewater. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualAveWastewater X X015 Annual average carbon content of wastewater. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. annualAveCarbonOfWastewater X X017 Annual mass of carbon released in fugitive emissions not controlled with a combustion device. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualMassFugitiveCarbon X X018 Annual mass of carbon released in process vents not controlled with a combustion device. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualMassProcessCarbon X X020 You did not identify any combustion configurations that burned both process off-gas from the petrochemical process unit and supplemental fuel by providing the name/identifier of those configurations as reported under subpart C. This data element is required. combustionUnits X X021 Name or ID is required. name X X022 Please select the methodology that is used to estimate the emissions of this petrochemical process unit, or click CANCEL. methodologyType X X023 Annual quantity of the ethylene produced. This data element is required. annualEthyleneProduced X X024 Name of feedstock. This data element is required. name X X025 Name of feedstock. You selected "Other" from the pick list provided, but failed to specify the name of the feedstock in the text box provided. This data element is required. otherNameText X X026 State of feedstock. This data element is required. state X X027 Name of product. This data element is required. name X X028 Name of product. You selected "Other" from the pick list provided, but failed to specify the name of the product in the text box provided. This data element is required. otherNameText X X029 State of product. This data element is required. state X X030 Volume or mass measurement method for feedstock for January. This data element is required. feedstockProductMap['January'].quantityMethod X X031 Carbon content determination method for feedstock for January. This data element is required. feedstockProductMap['January'].ccMethod X X032 Carbon content determination method for feedstock for January. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['January'].ccMethodOtherText X X033 Name or title of carbon content determination alternative method for January. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['January'].altMethod X X034 Explanation as to why alternative carbon content determination method was needed for feedstock for January. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['January'].altMethodRationale X X035 Name or title of molecular weight determination alternative method for January. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['January'].mwAltMethod X X036 Explanation as to why alternative molecular weight determination method was needed for feedstock for January. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['January'].mwAltMethodRationale X X037 Temperature at which volume of feedstock was measured for January. This data element is required. feedstockProductMap['January'].volumeTemp X X038 Volume or mass measurement method for feedstock for February. This data element is required. feedstockProductMap['February'].quantityMethod X X039 Carbon content determination method for feedstock for February. This data element is required. feedstockProductMap['February'].ccMethod X X040 Carbon content determination method for feedstock for February. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['February'].ccMethodOtherText X X041 Name or title of carbon content determination alternative method for February. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['February'].altMethod X X042 Explanation as to why alternative carbon content determination method was needed for feedstock for February. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['February'].altMethodRationale X X043 Name or title of molecular weight determination alternative method for February. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['February'].mwAltMethod X X044 Explanation as to why alternative molecular weight determination method was needed for feedstock for February. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['February'].mwAltMethodRationale X X045 Temperature at which volume of feedstock was measured for February. This data element is required. feedstockProductMap['February'].volumeTemp X X046 Volume or mass measurement method for feedstock for March. This data element is required. feedstockProductMap['March'].quantityMethod X X047 Carbon content determination method for feedstock for March. This data element is required. feedstockProductMap['March'].ccMethod X X048 Carbon content determination method for feedstock for March. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['March'].ccMethodOtherText X X049 Name or title of carbon content determination alternative method for March. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['March'].altMethod X X050 Explanation as to why alternative carbon content determination method was needed for feedstock for March. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['March'].altMethodRationale X X051 Name or title of molecular weight determination alternative method for March. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['March'].mwAltMethod X X052 Explanation as to why alternative molecular weight determination method was needed for feedstock for March. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['March'].mwAltMethodRationale X X053 Temperature at which volume of feedstock was measured for March. This data element is required. feedstockProductMap['March'].volumeTemp X X054 Volume or mass measurement method for feedstock for April. This data element is required. feedstockProductMap['April'].quantityMethod X X055 Carbon content determination method for feedstock for April. This data element is required. feedstockProductMap['April'].ccMethod X X056 Carbon content determination method for feedstock for April. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['April'].ccMethodOtherText X X057 Name or title of carbon content determination alternative method for April. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['April'].altMethod X X058 Explanation as to why alternative carbon content determination method was needed for feedstock for April. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['April'].altMethodRationale X X059 Name or title of molecular weight determination alternative method for April. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['April'].mwAltMethod X X060 Explanation as to why alternative molecular weight determination method was needed for feedstock for April. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['April'].mwAltMethodRationale X X061 Temperature at which volume of feedstock was measured for April. This data element is required. feedstockProductMap['April'].volumeTemp X X062 Volume or mass measurement method for feedstock for May. This data element is required. feedstockProductMap['May'].quantityMethod X X063 Carbon content determination method for feedstock for May. This data element is required. feedstockProductMap['May'].ccMethod X X064 Carbon content determination method for feedstock for May. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['May'].ccMethodOtherText X X065 Name or title of carbon content determination alternative method for May. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['May'].altMethod X X066 Explanation as to why alternative carbon content determination method was needed for feedstock for May. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['May'].altMethodRationale X X067 Name or title of molecular weight determination alternative method for May. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['May'].mwAltMethod X X068 Explanation as to why alternative molecular weight determination method was needed for feedstock for May. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['May'].mwAltMethodRationale X X069 Temperature at which volume of feedstock was measured for May. This data element is required. feedstockProductMap['May'].volumeTemp X X070 Volume or mass measurement method for feedstock for June. This data element is required. feedstockProductMap['June'].quantityMethod X X071 Carbon content determination method for feedstock for June. This data element is required. feedstockProductMap['June'].ccMethod X X072 Carbon content determination method for feedstock for June. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['June'].ccMethodOtherText X X073 Name or title of carbon content determination alternative method for June. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['June'].altMethod X X074 Explanation as to why alternative carbon content determination method was needed for feedstock for June. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['June'].altMethodRationale X X075 Name or title of molecular weight determination alternative method for June. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['June'].mwAltMethod X X076 Explanation as to why alternative molecular weight determination method was needed for feedstock for June. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['June'].mwAltMethodRationale X X077 Temperature at which volume of feedstock was measured for June. This data element is required. feedstockProductMap['June'].volumeTemp X X078 Volume or mass measurement method for feedstock for July. This data element is required. feedstockProductMap['July'].quantityMethod X X079 Carbon content determination method for feedstock for July. This data element is required. feedstockProductMap['July'].ccMethod X X080 Carbon content determination method for feedstock for July. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['July'].ccMethodOtherText X X081 Name or title of carbon content determination alternative method for July. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['July'].altMethod X X082 Explanation as to why alternative carbon content determination method was needed for feedstock for July. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['July'].altMethodRationale X X083 Name or title of molecular weight determination alternative method for July. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['July'].mwAltMethod X X084 Explanation as to why alternative molecular weight determination method was needed for feedstock for July. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['July'].mwAltMethodRationale X X085 Temperature at which volume of feedstock was measured for July. This data element is required. feedstockProductMap['July'].volumeTemp X X086 Volume or mass measurement method for feedstock for August. This data element is required. feedstockProductMap['August'].quantityMethod X X087 Carbon content determination method for feedstock for August. This data element is required. feedstockProductMap['August'].ccMethod X X088 Carbon content determination method for feedstock for August. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['August'].ccMethodOtherText X X089 Name or title of carbon content determination alternative method for August. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['August'].altMethod X X090 Explanation as to why alternative carbon content determination method was needed for feedstock for August. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['August'].altMethodRationale X X091 Name or title of molecular weight determination alternative method for August. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['August'].mwAltMethod X X092 Explanation as to why alternative molecular weight determination method was needed for feedstock for August. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['August'].mwAltMethodRationale X X093 Temperature at which volume of feedstock was measured for August. This data element is required. feedstockProductMap['August'].volumeTemp X X094 Volume or mass measurement method for feedstock for September. This data element is required. feedstockProductMap['September'].quantityMethod X X095 Carbon content determination method for feedstock for September. This data element is required. feedstockProductMap['September'].ccMethod X X096 Carbon content determination method for feedstock for September. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['September'].ccMethodOtherText X X097 Name or title of carbon content determination alternative method for September. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['September'].altMethod X X098 Explanation as to why alternative carbon content determination method was needed for feedstock for September. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['September'].altMethodRationale X X099 Name or title of molecular weight determination alternative method for September. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['September'].mwAltMethod X X100 Explanation as to why alternative molecular weight determination method was needed for feedstock for September. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['September'].mwAltMethodRationale X X101 Temperature at which volume of feedstock was measured for September. This data element is required. feedstockProductMap['September'].volumeTemp X X102 Volume or mass measurement method for feedstock for October. This data element is required. feedstockProductMap['October'].quantityMethod X X103 Carbon content determination method for feedstock for October. This data element is required. feedstockProductMap['October'].ccMethod X X104 Carbon content determination method for feedstock for October. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['October'].ccMethodOtherText X X105 Name or title of carbon content determination alternative method for October. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['October'].altMethod X X106 Explanation as to why alternative carbon content determination method was needed for feedstock for October. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['October'].altMethodRationale X X107 Name or title of molecular weight determination alternative method for October. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['October'].mwAltMethod X X108 Explanation as to why alternative molecular weight determination method was needed for feedstock for October. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['October'].mwAltMethodRationale X X109 Temperature at which volume of feedstock was measured for October. This data element is required. feedstockProductMap['October'].volumeTemp X X110 Volume or mass measurement method for feedstock for November. This data element is required. feedstockProductMap['November'].quantityMethod X X111 Carbon content determination method for feedstock for November. This data element is required. feedstockProductMap['November'].ccMethod X X112 Carbon content determination method for feedstock for November. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['November'].ccMethodOtherText X X113 Name or title of carbon content determination alternative method for November. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['November'].altMethod X X114 Explanation as to why alternative carbon content determination method was needed for feedstock for November. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['November'].altMethodRationale X X115 Name or title of molecular weight determination alternative method for November. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['November'].mwAltMethod X X116 Explanation as to why alternative molecular weight determination method was needed for feedstock for November. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['November'].mwAltMethodRationale X X117 Temperature at which volume of feedstock was measured for November. This data element is required. feedstockProductMap['November'].volumeTemp X X118 Volume or mass measurement method for feedstock for December. This data element is required. feedstockProductMap['December'].quantityMethod X X119 Carbon content determination method for feedstock for December. This data element is required. feedstockProductMap['December'].ccMethod X X120 Carbon content determination method for feedstock for December. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['December'].ccMethodOtherText X X121 Name or title of carbon content determination alternative method for December. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['December'].altMethod X X122 Explanation as to why alternative carbon content determination method was needed for feedstock for December. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['December'].altMethodRationale X X123 Name or title of molecular weight determination alternative method for December. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['December'].mwAltMethod X X124 Explanation as to why alternative molecular weight determination method was needed for feedstock for December. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['December'].mwAltMethodRationale X X125 Temperature at which volume of feedstock was measured for December. This data element is required. feedstockProductMap['December'].volumeTemp X X126 Volume or mass measurement method for product for January. This data element is required. feedstockProductMap['January'].quantityMethod X X127 Carbon content determination method for product for January. This data element is required. feedstockProductMap['January'].ccMethod X X128 Carbon content determination method for product for January. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['January'].ccMethodOtherText X X129 Name or title of carbon content determination alternative method for January. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['January'].altMethod X X130 Explanation as to why alternative carbon content determination method was needed for product for January. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['January'].altMethodRationale X X131 Name or title of molecular weight determination alternative method for January. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['January'].mwAltMethod X X132 Explanation as to why alternative molecular weight determination method was needed for product for January. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['January'].mwAltMethodRationale X X133 Temperature at which volume of product was measured for January. This data element is required. feedstockProductMap['January'].volumeTemp X X134 Volume or mass measurement method for product for February. This data element is required. feedstockProductMap['February'].quantityMethod X X135 Carbon content determination method for product for February. This data element is required. feedstockProductMap['February'].ccMethod X X136 Carbon content determination method for product for February. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['February'].ccMethodOtherText X X137 Name or title of carbon content determination alternative method for February. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['February'].altMethod X X138 Explanation as to why alternative carbon content determination method was needed for product for February. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['February'].altMethodRationale X X139 Name or title of molecular weight determination alternative method for February. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['February'].mwAltMethod X X140 Explanation as to why alternative molecular weight determination method was needed for product for February. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['February'].mwAltMethodRationale X X141 Temperature at which volume of product was measured for February. This data element is required. feedstockProductMap['February'].volumeTemp X X142 Volume or mass measurement method for product for March. This data element is required. feedstockProductMap['March'].quantityMethod X X143 Carbon content determination method for product for March. This data element is required. feedstockProductMap['March'].ccMethod X X144 Carbon content determination method for product for March. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['March'].ccMethodOtherText X X145 Name or title of carbon content determination alternative method for March. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['March'].altMethod X X146 Explanation as to why alternative carbon content determination method was needed for product for March. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['March'].altMethodRationale X X147 Name or title of molecular weight determination alternative method for March. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['March'].mwAltMethod X X148 Explanation as to why alternative molecular weight determination method was needed for product for March. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['March'].mwAltMethodRationale X X149 Temperature at which volume of product was measured for March. This data element is required. feedstockProductMap['March'].volumeTemp X X150 Volume or mass measurement method for product for April. This data element is required. feedstockProductMap['April'].quantityMethod X X151 Carbon content determination method for product for April. This data element is required. feedstockProductMap['April'].ccMethod X X152 Carbon content determination method for product for April. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['April'].ccMethodOtherText X X153 Name or title of carbon content determination alternative method for April. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['April'].altMethod X X154 Explanation as to why alternative carbon content determination method was needed for product for April. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['April'].altMethodRationale X X155 Name or title of molecular weight determination alternative method for April. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['April'].mwAltMethod X X156 Explanation as to why alternative molecular weight determination method was needed for product for April. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['April'].mwAltMethodRationale X X157 Temperature at which volume of product was measured for April. This data element is required. feedstockProductMap['April'].volumeTemp X X158 Volume or mass measurement method for product for May. This data element is required. feedstockProductMap['May'].quantityMethod X X159 Carbon content determination method for product for May. This data element is required. feedstockProductMap['May'].ccMethod X X160 Carbon content determination method for product for May. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['May'].ccMethodOtherText X X161 Name or title of carbon content determination alternative method for May. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['May'].altMethod X X162 Explanation as to why alternative carbon content determination method was needed for product for May. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['May'].altMethodRationale X X163 Name or title of molecular weight determination alternative method for May. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['May'].mwAltMethod X X164 Explanation as to why alternative molecular weight determination method was needed for product for May. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['May'].mwAltMethodRationale X X165 Temperature at which volume of product was measured for May. This data element is required. feedstockProductMap['May'].volumeTemp X X166 Volume or mass measurement method for product for June. This data element is required. feedstockProductMap['June'].quantityMethod X X167 Carbon content determination method for product for June. This data element is required. feedstockProductMap['June'].ccMethod X X168 Carbon content determination method for product for June. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['June'].ccMethodOtherText X X169 Name or title of carbon content determination alternative method for June. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['June'].altMethod X X170 Explanation as to why alternative carbon content determination method was needed for product for June. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['June'].altMethodRationale X X171 Name or title of molecular weight determination alternative method for June. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['June'].mwAltMethod X X172 Explanation as to why alternative molecular weight determination method was needed for product for June. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['June'].mwAltMethodRationale X X173 Temperature at which volume of product was measured for June. This data element is required. feedstockProductMap['June'].volumeTemp X X174 Volume or mass measurement method for product for July. This data element is required. feedstockProductMap['July'].quantityMethod X X175 Carbon content determination method for product for July. This data element is required. feedstockProductMap['July'].ccMethod X X176 Carbon content determination method for product for July. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['July'].ccMethodOtherText X X177 Name or title of carbon content determination alternative method for July. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['July'].altMethod X X178 Explanation as to why alternative carbon content determination method was needed for product for July. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['July'].altMethodRationale X X179 Name or title of molecular weight determination alternative method for July. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['July'].mwAltMethod X X180 Explanation as to why alternative molecular weight determination method was needed for product for July. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['July'].mwAltMethodRationale X X181 Temperature at which volume of product was measured for July. This data element is required. feedstockProductMap['July'].volumeTemp X X182 Volume or mass measurement method for product for August. This data element is required. feedstockProductMap['August'].quantityMethod X X183 Carbon content determination method for product for August. This data element is required. feedstockProductMap['August'].ccMethod X X184 Carbon content determination method for product for August. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['August'].ccMethodOtherText X X185 Name or title of carbon content determination alternative method for August. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['August'].altMethod X X186 Explanation as to why alternative carbon content determination method was needed for product for August. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['August'].altMethodRationale X X187 Name or title of molecular weight determination alternative method for August. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['August'].mwAltMethod X X188 Explanation as to why alternative molecular weight determination method was needed for product for August. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['August'].mwAltMethodRationale X X189 Temperature at which volume of product was measured for August. This data element is required. feedstockProductMap['August'].volumeTemp X X190 Volume or mass measurement method for product for September. This data element is required. feedstockProductMap['September'].quantityMethod X X191 Carbon content determination method for product for September. This data element is required. feedstockProductMap['September'].ccMethod X X192 Carbon content determination method for product for September. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['September'].ccMethodOtherText X X193 Name or title of carbon content determination alternative method for September. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['September'].altMethod X X194 Explanation as to why alternative carbon content determination method was needed for product for September. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['September'].altMethodRationale X X195 Name or title of molecular weight determination alternative method for September. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['September'].mwAltMethod X X196 Explanation as to why alternative molecular weight determination method was needed for product for September. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['September'].mwAltMethodRationale X X197 Temperature at which volume of product was measured for September. This data element is required. feedstockProductMap['September'].volumeTemp X X198 Volume or mass measurement method for product for October. This data element is required. feedstockProductMap['October'].quantityMethod X X199 Carbon content determination method for product for October. This data element is required. feedstockProductMap['October'].ccMethod X X200 Carbon content determination method for product for October. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['October'].ccMethodOtherText X X201 Name or title of carbon content determination alternative method for October. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['October'].altMethod X X202 Explanation as to why alternative carbon content determination method was needed for product for October. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['October'].altMethodRationale X X203 Name or title of molecular weight determination alternative method for October. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['October'].mwAltMethod X X204 Explanation as to why alternative molecular weight determination method was needed for product for October. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['October'].mwAltMethodRationale X X205 Temperature at which volume of product was measured for October. This data element is required. feedstockProductMap['October'].volumeTemp X X206 Volume or mass measurement method for product for November. This data element is required. feedstockProductMap['November'].quantityMethod X X207 Carbon content determination method for product for November. This data element is required. feedstockProductMap['November'].ccMethod X X208 Carbon content determination method for product for November. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['November'].ccMethodOtherText X X209 Name or title of carbon content determination alternative method for November. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['November'].altMethod X X210 Explanation as to why alternative carbon content determination method was needed for product for November. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['November'].altMethodRationale X X211 Name or title of molecular weight determination alternative method for November. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['November'].mwAltMethod X X212 Explanation as to why alternative molecular weight determination method was needed for product for November. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['November'].mwAltMethodRationale X X213 Temperature at which volume of product was measured for November. This data element is required. feedstockProductMap['November'].volumeTemp X X214 Volume or mass measurement method for product for December. This data element is required. feedstockProductMap['December'].quantityMethod X X215 Carbon content determination method for product for December. This data element is required. feedstockProductMap['December'].ccMethod X X216 Carbon content determination method for product for December. You selected "Industry standard practice for carbon black" from the pick list provided, but failed to specify the practice in the text box provided. This data element is required. feedstockProductMap['December'].ccMethodOtherText X X217 Name or title of carbon content determination alternative method for December. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['December'].altMethod X X218 Explanation as to why alternative carbon content determination method was needed for product for December. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['December'].altMethodRationale X X219 Name or title of molecular weight determination alternative method for December. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to specify the name or title of the alternative method in the text box provided. This data element is required. feedstockProductMap['December'].mwAltMethod X X220 Explanation as to why alternative molecular weight determination method was needed for product for December. You selected "98.244(b)(4)(xv)(B) alternative method" from the pick list provided, but failed to provide an explanation as to why the alternative method was needed. This data element is required. feedstockProductMap['December'].mwAltMethodRationale X X221 Temperature at which volume of product was measured for December. This data element is required. feedstockProductMap['December'].volumeTemp X X222 The annual quantity of carbon-containing feedstock fed to the ethylene process unit. This data element is required. annualQuantity X X223 The annual quantity of carbon-containing feedstock fed to the ethylene process unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualQuantity X X224 The fraction of the total emissions attributable to combustion of off-gas from the ethylene process unit. This data element is required. fraction X X225 The fraction of the total emissions attributable to combustion of off-gas from the ethylene process unit. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. fraction X X226 The type of carbon-containing feedstock fed to the ethylene process unit. This data element is required. type X X227 The type of carbon-containing feedstock fed to the ethylene process unit. You selected "Other" from the pick list provided, but failed to specify the type in the text box provided. This data element is required. otherTypeText X X228 The configuration name or identifier of Subpart C stationary combustion configuration that burns process off-gas from the ethylene process unit. This data element is required. name X X282 Type of petrochemical produced. This data element is required. feedStockType X X283 Annual quantity of the petrochemical produced. This data element is required. petrochemialProduced X X284 Annual quantity of the petrochemical produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. petrochemialProduced X X289 Annual quantity of the ethylene produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualEthyleneProduced X X298 Unit of measure for total annual wastewater flow. You have entered the total annual flow of wastewater. You must enter the unit of measure for total annual wastewater flow or remove the total annual flow of wastewater. annualAveWastewater X X299 Annual average carbon content of wastewater. You have entered the total annual flow of wastewater. You must enter the annual average carbon content of wastewater or remove the total annual flow of wastewater. annualAveWastewater X X300 Total annual flow of wastewater. You have entered the unit of measure for total annual wastewater flow. You must enter the total annual flow of wastewater or remove the unit of measure for total annual wastewater flow. measureUnitOfAnnualAveWastewater X X301 Annual average carbon content of wastewater. You have entered the unit of measure for total annual wastewater flow. You must enter the annual average carbon content of wastewater or remove the unit of measure for total annual wastewater flow. measureUnitOfAnnualAveWastewater X X302 Total annual flow of wastewater. You have entered the annual average carbon content of wastewater. You must enter the total annual flow of wastewater or remove the annual average carbon content of wastewater. annualAveCarbonOfWastewater X X303 Unit of measure for total annual wastewater flow. You have entered the annual average carbon content of wastewater. You must enter the unit of measure for total annual wastewater flow or remove the annual average carbon content of wastewater. annualAveCarbonOfWastewater X X310 You have selected Subpart X for reporting, but you have not yet added a petrochemical process unit. none X X311 You have elected to use the mass balance methodology to estimate emissions from a petrochemical process unit, but you have not added a carbon-containing feedstock. subPartXFeedstockBeanList X X312 You have elected to use the mass balance methodology to estimate emissions from a petrochemical process unit, but you have not added a carbon-containing product. subPartXProductBeanList X X313 You have elected to use the ethylene combustion methodology to estimate emissions from a petrochemical process unit, but you have not added a carbon-containing feedstock. subPartXEthyleneFeedstockBeanList X X314 You have elected to use the ethylene combustion methodology to estimate emissions from a petrochemical process unit, but you have not added a subpart C stationary combustion configuration that burns off-gas from the ethylene process unit. subPartXEthyleneStationaryUnitBeanList X X315 Volume or mass measurement method for feedstock for January. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['January'].quantityMethodOther X X316 Carbon content determination method for feedstock for January. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['January'].ccMethodOtherText X X317 Molecular weight determination method for January. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['January'].mwMethodOther X X318 Volume or mass measurement method for feedstock for February. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['February'].quantityMethodOther X X319 Carbon content determination method for feedstock for February. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['February'].ccMethodOtherText X X320 Molecular weight determination method for February. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['February'].mwMethodOther X X321 Volume or mass measurement method for feedstock for March. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['March'].quantityMethodOther X X322 Carbon content determination method for feedstock for March. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['March'].ccMethodOtherText X X323 Molecular weight determination method for March. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['March'].mwMethodOther X X324 Volume or mass measurement method for feedstock for April. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['April'].quantityMethodOther X X325 Carbon content determination method for feedstock for April. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['April'].ccMethodOtherText X X326 Molecular weight determination method for April. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['April'].mwMethodOther X X327 Volume or mass measurement method for feedstock for May. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['May'].quantityMethodOther X X328 Carbon content determination method for feedstock for May. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['May'].ccMethodOtherText X X329 Molecular weight determination method for May. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['May'].mwMethodOther X X330 Volume or mass measurement method for feedstock for June. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['June'].quantityMethodOther X X331 Carbon content determination method for feedstock for June. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['June'].ccMethodOtherText X X332 Molecular weight determination method for June. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['June'].mwMethodOther X X333 Volume or mass measurement method for feedstock for July. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['July'].quantityMethodOther X X334 Carbon content determination method for feedstock for July. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['July'].ccMethodOtherText X X335 Molecular weight determination method for July. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['July'].mwMethodOther X X336 Volume or mass measurement method for feedstock for August. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['August'].quantityMethodOther X X337 Carbon content determination method for feedstock for August. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['August'].ccMethodOtherText X X338 Molecular weight determination method for August. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['August'].mwMethodOther X X339 Volume or mass measurement method for feedstock for September. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['September'].quantityMethodOther X X340 Carbon content determination method for feedstock for September. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['September'].ccMethodOtherText X X341 Molecular weight determination method for September. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['September'].mwMethodOther X X342 Volume or mass measurement method for feedstock for October. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['October'].quantityMethodOther X X343 Carbon content determination method for feedstock for October. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['October'].ccMethodOtherText X X344 Molecular weight determination method for October. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['October'].mwMethodOther X X345 Volume or mass measurement method for feedstock for November. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['November'].quantityMethodOther X X346 Carbon content determination method for feedstock for November. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['November'].ccMethodOtherText X X347 Molecular weight determination method for November. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['November'].mwMethodOther X X348 Volume or mass measurement method for feedstock for December. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['December'].quantityMethodOther X X349 Carbon content determination method for feedstock for December. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['December'].ccMethodOtherText X X350 Molecular weight determination method for December. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['December'].mwMethodOther X X351 Volume or mass measurement method for product for January. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['January'].quantityMethodOther X X352 Carbon content determination method for product for January. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['January'].ccMethodOtherText X X353 Molecular weight determination method for January. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['January'].mwMethodOther X X354 Volume or mass measurement method for product for February. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['February'].quantityMethodOther X X355 Carbon content determination method for product for February. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['February'].ccMethodOtherText X X356 Molecular weight determination method for February. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['February'].mwMethodOther X X357 Volume or mass measurement method for product for March. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['March'].quantityMethodOther X X358 Carbon content determination method for product for March. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['March'].ccMethodOtherText X X359 Molecular weight determination method for March. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['March'].mwMethodOther X X360 Volume or mass measurement method for product for April. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['April'].quantityMethodOther X X361 Carbon content determination method for product for April. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['April'].ccMethodOtherText X X362 Molecular weight determination method for April. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['April'].mwMethodOther X X363 Volume or mass measurement method for product for May. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['May'].quantityMethodOther X X364 Carbon content determination method for product for May. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['May'].ccMethodOtherText X X365 Molecular weight determination method for May. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['May'].mwMethodOther X X366 Volume or mass measurement method for product for June. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['June'].quantityMethodOther X X367 Carbon content determination method for product for June. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['June'].ccMethodOtherText X X368 Molecular weight determination method for June. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['June'].mwMethodOther X X369 Volume or mass measurement method for product for July. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['July'].quantityMethodOther X X370 Carbon content determination method for product for July. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['July'].ccMethodOtherText X X371 Molecular weight determination method for July. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['July'].mwMethodOther X X372 Volume or mass measurement method for product for August. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['August'].quantityMethodOther X X373 Carbon content determination method for product for August. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['August'].ccMethodOtherText X X374 Molecular weight determination method for August. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['August'].mwMethodOther X X375 Volume or mass measurement method for product for September. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['September'].quantityMethodOther X X376 Carbon content determination method for product for September. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['September'].ccMethodOtherText X X377 Molecular weight determination method for September. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['September'].mwMethodOther X X378 Volume or mass measurement method for product for October. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['October'].quantityMethodOther X X379 Carbon content determination method for product for October. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['October'].ccMethodOtherText X X380 Molecular weight determination method for October. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['October'].mwMethodOther X X381 Volume or mass measurement method for product for November. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['November'].quantityMethodOther X X382 Carbon content determination method for product for November. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['November'].ccMethodOtherText X X383 Molecular weight determination method for November. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['November'].mwMethodOther X X384 Volume or mass measurement method for product for December. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['December'].quantityMethodOther X X385 Carbon content determination method for product for December. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['December'].ccMethodOtherText X X386 Molecular weight determination method for December. You selected "Other (specify)" from the pick list provided, but failed to specify the method in the text box provided. This data element is required. feedstockProductMap['December'].mwMethodOther X X387 Unit of measure for total annual wastewater flow. The units of measure \'kg\' and \'gal\' are the only permitted values. Please use one of these two values, or click CANCEL. measureUnitOfAnnualAveWastewater X X423 Feedstock name or identifier. This data element is required. id X X424 Product name or identifier. This data element is required. id X X425 Product or feedstock indicator. This data element is required. feedstockOrProduct X X427 Process used if the facility is conducting a mass balance to monitor Ethylene dichloride. This data element is required. Please enter the required data or click CANCEL. typeOfEthyleneDichlorideProduced X X428 Annual quantity of the intermediate Ethylene dichloride produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualIntermediateEthyleneDichlorideProduced X X429 Annual quantity of the intermediate Ethylene dichloride produced. This data element is required. annualIntermediateEthyleneDichlorideProduced X X431 The annual quantity of the petrochemical produced [{1} metric tons] is not the same as the total amount of carbon-containing product for the petrochemical product stream [{2} metric tons]. Please correct this critical error. annualPetrochemicalQuantitiesDifferent X X432 Indicate whether the feedstock is measured as mass or volume. This data element is required. massOrVolume X X433 Indicate whether the product is measured as mass or volume. This data element is required. massOrVolume X X434 Molecular weight determination method for January. This data element is required. feedstockProductMap['January'].mwMethod X X435 Molecular weight determination method for February. This data element is required. feedstockProductMap['February'].mwMethod X X436 Molecular weight determination method for March. This data element is required. feedstockProductMap['March'].mwMethod X X437 Molecular weight determination method for April. This data element is required. feedstockProductMap['April'].mwMethod X X438 Molecular weight determination method for May. This data element is required. feedstockProductMap['May'].mwMethod X X439 Molecular weight determination method for June. This data element is required. feedstockProductMap['June'].mwMethod X X440 Molecular weight determination method for July. This data element is required. feedstockProductMap['July'].mwMethod X X441 Molecular weight determination method for August. This data element is required. feedstockProductMap['August'].mwMethod X X442 Molecular weight determination method for September. This data element is required. feedstockProductMap['September'].mwMethod X X443 Molecular weight determination method for October. This data element is required. feedstockProductMap['October'].mwMethod X X444 Molecular weight determination method for November. This data element is required. feedstockProductMap['November'].mwMethod X X445 Molecular weight determination method for December. This data element is required. feedstockProductMap['December'].mwMethod X X446 Molecular weight determination method for January. This data element is required. feedstockProductMap['January'].mwMethod X X447 Molecular weight determination method for February. This data element is required. feedstockProductMap['February'].mwMethod X X448 Molecular weight determination method for March. This data element is required. feedstockProductMap['March'].mwMethod X X449 Molecular weight determination method for April. This data element is required. feedstockProductMap['April'].mwMethod X X450 Molecular weight determination method for May. This data element is required. feedstockProductMap['May'].mwMethod X X451 Molecular weight determination method for June. This data element is required. feedstockProductMap['June'].mwMethod X X452 Molecular weight determination method for July. This data element is required. feedstockProductMap['July'].mwMethod X X453 Molecular weight determination method for August. This data element is required. feedstockProductMap['August'].mwMethod X X454 Molecular weight determination method for September. This data element is required. feedstockProductMap['September'].mwMethod X X455 Molecular weight determination method for October. This data element is required. feedstockProductMap['October'].mwMethod X X456 Molecular weight determination method for November. This data element is required. feedstockProductMap['November'].mwMethod X X457 Molecular weight determination method for December. This data element is required. feedstockProductMap['December'].mwMethod X X458 The annual quantity of the petrochemical produced [{1} metric tons] is not the same as the total amount of carbon-containing product for the petrochemical product stream [{2} metric tons]. Please correct this critical error. annualPetrochemicalQuantitiesDifferent X X460 You have reported {1} for the MassBalanceDetails/XProductDetails/PetroChemicalProductType node. This is a valid enumerated value in the schema, but is for use in a different reporting year. This value is not permitted for Reporting Year 2019 or any prior Reporting Year. For Reporting Year 2019 or any prior Reporting Year, you must report \'Ethylene dichloride\' in the \'PetroChemicalProductType\' node. You must correct the current value before continuing. typeOfPetrochemicalProduced X X461 You have reported {1} for the MassBalanceDetails/XProductDetails/PetroChemicalProductType node. This is a valid enumerated value in the schema, but is for use in a different reporting year. This value is not permitted for Reporting Year 2020 or any following Reporting Year. For Reporting Year 2020 or any following Reporting Year, you must report \'Ethylene dichloride (stand-alone EDC process)\' or \'Ethylene dichloride (integrated EDC/VCM process)\' in the \'PetroChemicalProductType\' node, as appropriate. You must correct the current value before continuing. typeOfPetrochemicalProduced X X501 The annual CH4 emissions for the subpart [{1} metric tons] is less than the minimum expected value of 0 metric tons. Please address this critical error. Then you can return here to perform another final review and submit your report. data['subpartXAnnualCH4'] X X503 The annual N2O emissions for the subpart [{1} metric tons] is less than the minimum expected value of 0 metric tons. Please address this critical error. Then you can return here to perform another final review and submit your report. data['subpartXAnnualN2O'] X X505 The N2O to CH4 emissions ratio [{1}] for combustion of fuel gas in the combustion configuration [{2}] differs from the expected value of 0.2. Please address this critical error. Then you can return here to perform another final review and submit your report. data['n2OToCH4Ratio'] X X518 The sum of the average CO2 concentration [{1}%] and the average concentration of other carbon compounds [{2}%] in the flare gas for flare [{3}] exceeds 100 percent. Please address this critical error. Then you can return here to perform another final review and submit your report. data[annualAvgCO2Concentration] X X532 The annual CO2 emissions for Subpart X have not been reported. In your report, within Subpart X, Gas Information Details, "Carbon Dioxide" has not been reported. Please address this critical error. Then you can return here to perform another final review and submit your report. data[subpartXAnnualCO2] X X533 Twelve months of details for the {1} [{2}] at the unit [{3}] have not been reported. Please address this critical error. Then you can return here to perform another final review and submit your report. data[monthlyDetailsCount] X X534 CO2 data from CEMS have been reported (see <XTier4CEMSDetails>), but no units have been reported using the CEMS methodology (<CEMSUnitDetails>). Please address this critical error. Then you can return here to perform another final review and submit your report. data[cemsUnitDetailsFlag] X X535 Units that use the CEMS methodology have been reported (see <CEMSUnitDetails>), but no CEMS emissions data have been reported (<XTier4CEMSDetails>). Please address this critical error. Then you can return here to perform another final review and submit your report. data[cemsUnitDetailsFlag] X X536 You reported a fuel type of [{1}] and a CEMS monitoring location configuration type of [{2}] for CEMS monitoring location [{3}]. If emissions from a combustion unit, including a combustion unit that burns only off-gas from a petrochemical process unit (i.e., fuel gas), are monitored by the CEMS, then you should report using the \'combined process/stationary combustion units share common stack\' configuration type. If no combustion emissions are monitored by the CEMS, then you should not report a fuel type. Please address this critical error. Then you can return here to perform another final review and submit your report. data[locationFuel] X X537 The units of measure [{1}] for the annual quantity of the feedstock [{2}] used at the ethylene unit [{3}] is missing or invalid. It should be Metric Tons. Please address this critical error. Then you can return here to perform another final review and submit your report. data[feedstockAnnualQuantity] X X538 The units of measure [{1}] for the annual quantity of the product [{2}] used at the ethylene unit [{3}] is missing or invalid. It should be Metric Tons. Please address this critical error. Then you can return here to perform another final review and submit your report. data[productAnnualQuantity] X X539 Equation Y-1a details for the flare [{1}] have not been reported. Based on the information available to us, it appears that this data element is required per 98.256(e)(6). Please address this critical error. Then you can return here to perform another final review and submit your report. data[co2EmissionsCalculationMethod] X X540 Equation Y-1b details for the flare [{1}] have not been reported. Based on the information available to us, it appears that this data element is required per 98.256(e)(7). Please address this critical error. Then you can return here to perform another final review and submit your report. data[co2EmissionsCalculationMethod] X X541 Equation Y-2 details for the flare [{1}] have not been reported. Based on the information available to us, it appears that this data element is required per 98.256(e)(8). Please address this critical error. Then you can return here to perform another final review and submit your report. data[co2EmissionsCalculationMethod] X X552 For the flare [{1}] you have reported {2} as the unit of measure for the Annual volume of flare gas combusted (the EmissionsDetails/ Y2EquationDetails/ AnnualVolumeofFlareGas node). While this is an enumerated value in the schema, for Equation Y-2 this volume must be reported in terms of MMscf. You must correct this before continuing. annualFlareGasVolumeUOM X X553 For the flare [{1}] you have reported {2} as the unit of measure for the Annual average higher heating value of the flare gas combusted (the EmissionsDetails/ Y2EquationDetails/ AnnualAverageHigherHeatingValue node). While this is an enumerated value in the schema, for Equation Y-2 this value must be reported in terms of MMBtu/MMscf. You must correct this before continuing. avgHighHeatingUOM X Y192 Type of flare. This data element is required. Please make a selection. flareType X Y193 Flare service type. This data element is required. Please make a selection. flareServiceType X Y194 Flare service type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. flareServiceTypeOther X Y195 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 X Y196 Equation Y-1a Inputs Method. This data element is required. Please make a selection or click CANCEL. equationY1aInputsMethod X Y201 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 X Y202 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 X Y204 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency X Y205 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume X Y206 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume X Y208 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures X Y209 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures X Y211 Annual average molecular weight. This data element is required. Please enter the required data. avgMolecularWeight X Y212 Annual average molecular weight. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. avgMolecularWeight X Y214 Method(s) used to determine the molecular weight of the flare gas. This data element is required. avgMolecularWeightMethods X Y215 Number of days missing data procedures were used for annual average molecular weight of the flare gas. This data element is required. Please enter the required data. avgMolecularWeightDaysMissingProcedures X Y216 Number of days missing data procedures were used for annual average molecular weight of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgMolecularWeightDaysMissingProcedures X Y218 Annual average carbon content of the flare gas. This data element is required. Please enter the required data. avgCarbonContent X Y219 Annual average carbon content of the flare gas. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. avgCarbonContent X Y221 Method(s) used to determine the carbon content of the flare gas. This data element is required. avgCarbonContentMethods X Y222 Number of days missing data procedures were used for average carbon content of the flare gas. This data element is required. Please enter the required data. avgCarbonContentDaysMissingProcedures X Y223 Number of days missing data procedures were used for average carbon content of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgCarbonContentDaysMissingProcedures X Y225 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 X Y226 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 X Y228 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency X Y229 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume X Y230 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume X Y232 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures X Y233 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures X Y235 Annual average CO2 concentration. This data element is required. Please enter the required data. avgCo2Concentration X Y236 Annual average CO2 concentration. This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. avgCo2Concentration X Y238 Method used to determine the annual average CO2 concentration. This data element is required. avgCo2ConcentrationBasis X Y239 Number of days missing data procedures were used for annual average CO2 concentration. This data element is required. Please enter the required data. avgCo2ConcentrationDaysMissingProcedures X Y240 Number of days missing data procedures were used for annual average CO2 concentration. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgCo2ConcentrationDaysMissingProcedures X Y242 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 X Y243 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 X Y245 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency X Y246 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume X Y247 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume X Y249 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures X Y250 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures X Y252 Conditions on which the annual volume of flare gas was determined. This data element is required. Please make a selection. annualFlareGasVolumeConditions X Y253 Annual average higher heating value of the flare gas combusted. This data element is required. Please enter the required data. avgHighHeatingValue X Y254 Annual average higher heating value of the flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. avgHighHeatingValue X Y256 Method used to determine the annual average higher heating value. This data element is required. avgHighHeatingValueBasis X Y257 Number of days missing data procedures were used for annual average higher heating value. This data element is required. Please enter the required data. avgHighHeatingValueDaysMissingProcedures X Y258 Number of days missing data procedures were used for annual average higher heating value. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgHighHeatingValueDaysMissingProcedures X Y260 Conditions on which the annual average higher heating value was determined. This data element is required. Please make a selection. avgHighHeatingValueConditions X Y261 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 X Y262 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 X Y264 Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. This data element is required. Please enter the required data. numberOfSSMEventsExceeding500K X Y265 Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSSMEventsExceeding500K X Y423 Annual average concentration of each carbon-containing compound (other than CO2). This data element is required. Please enter the required data or click CANCEL. annualAverageConcentration X Y424 Annual average concentration of each carbon-containing compound (other than CO2). This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. annualAverageConcentration X Y426 Method(s) used to determine the annual average concentration of the carbon-containing compound(s). This data element is required. annualAverageConcentrationMethods X Y426a Method(s) used to determine the annual average concentration of the carbon-containing compound(s). You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. annualAverageConcentrationMethodsOther X Y427 Number of days missing data procedures were used for annual average concentration of carbon in the compound. This data element is required. Please enter the required data or click CANCEL. annualAverageConcentrationDaysMissingProcedures X Y428 Number of days missing data procedures were used for annual average concentration of carbon in the compound. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualAverageConcentrationDaysMissingProcedures X Y431 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 X Y436 Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. carbonFractionBasis X Y437 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther X Y438 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o X Y439 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o X Y442 Carbon-containing compound (other than carbon dioxide) in flare gas stream. You must enter at least one carbon-containing compound other than carbon dioxide in flare gas stream. This is a required field. carbonCompounds X Y452 Method(s) used to determine the molecular weight of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMolecularWeightMethodsOther X Y453 Method(s) used to determine the carbon content of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgCarbonContentMethodsOther X Y454 Method used to determine the annual average CO2 concentration. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgCo2ConcentrationBasisOther X Y455 Method used to determine the annual average higher heating value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgHighHeatingValueBasisOther X Y491 Flare type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. flareTypeOther X Y495 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure X Y496 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure X Y497 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure X Y505 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther X Y506 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther X Y507 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther X Y513 Annual CH4 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCh4 X Y514 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 X Y515 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 X Y516 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 X Y517 Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. carbonFractionBasis X Y518 Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. carbonFractionBasis X Y519 Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. carbonFractionBasis X Y520 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o X Y521 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o X Y522 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o X Y526 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o X Y527 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o X Y528 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o X Y555 Is the flare serviced by a flare gas recovery system? This data element is required. Please make a selection. isTheFlareServicedByFlareGasRecoverySystem X Y590 Annual mass of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasMass X Y591 Annual mass of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasMass X Y593 Method(s) used to determine the mass of flare gas. This data element is required. Please enter the required data. massFlareGasMethods X Y594 Number of days missing data procedures were used for annual mass of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasMassDaysMissingProcedures X Y595 Number of days missing data procedures were used for annual mass of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasMassDaysMissingProcedures Y ALL0001 CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveCasNumber'] Y ALL0002 Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. transientData['doesNotHaveChemicalFormula'] Y CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML Y CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits Y CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml Y CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions Y CML-029 Carbon dioxide emissions attributable to process. This data element is required. processCo2Emissions Y CML-031 Carbon dioxide emissions attributable to combustion. This data element is required. combustionCo2Emissions Y CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs Y CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt Y CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow Y CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture Y CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow Y CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits Y CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions Y CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission Y CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission Y CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission Y CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission Y CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> Y CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 Y CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs Y CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt Y CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate Y CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate Y CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType Y CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate Y CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] Y CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] Y CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] Y CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] Y CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] Y CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] Y CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] Y CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] Y CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName Y CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted Y CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission Y CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission Y CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted Y CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions Y CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate Y CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate Y CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate Y CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate Y IVT-Y5032 Internal height of delayed coking unit vessel. This data element is required. Please enter the required data or click CANCEL. hdrumInputValue Y IVT-Y5035 Typical distance from the top of the delayed coking unit vessel to the top of the coke bed (i.e., coke drum outage) at the end of the coking cycle from company records or engineering estimates. This data element is required. Please enter the required data or click CANCEL. houtageInputValue Y IVT-Y5038 Diameter of delayed coking unit vessel. This data element is required. Please enter the required data or click CANCEL. diameterY18aInputValue Y IVT-Y5041 Typical distance from the bottom of the coking unit vessel to the top of the water level at the end of the cooling cycle just prior to atmospheric venting from company records or engineering estimates. This data element is required. Please enter the required data or click CANCEL. hwaterInputValue Y IVT-Y5042 Typical distance from the bottom of the coking unit vessel to the top of the water level at the end of the cooling cycle just prior to atmospheric venting from company records or engineering estimates. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. hwaterInputValue Y IVT-Y5044 Diameter of delayed coking unit vessel. This data element is required. Please enter the required data or click CANCEL. diameterY18bInputValue Y IVT-Y5047 Typical dry mass of coke in the delayed coking unit vessel at the end of the coking cycle as determined in paragraph (i)(1) of this section. This data element is required. Please enter the required data or click CANCEL. mcokeInputValue Y IVT-Y5048 Temperature of the delayed coking unit vessel overhead line measured as near the coking unit vessel as practical just prior to venting to the atmosphere. This data element is required. Please enter the required data or click CANCEL. toverheadInputValue Y IVT-Y5051 Temperature of the delayed coking unit vessel near the bottom of the coke bed. This data element is required. Please enter the required data or click CANCEL. tbottomInputValue Y IVT-Y5054 Pressure of the delayed coking unit vessel just prior to opening the atmospheric vent. This data element is required. Please enter the required data or click CANCEL. poverheadInputValue Y IVT-Y5055 Pressure of the delayed coking unit vessel just prior to opening the atmospheric vent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. poverheadInputValue Y IVT-Y5057 Cumulative number of decoking cycles (or coke-cutting cycles) for all delayed coking unit vessels associated with the delayed coking unit during the year. This data element is required. Please enter the required data or click CANCEL. numberInputValue Y IVT-Y5058 Cumulative number of decoking cycles (or coke-cutting cycles) for all delayed coking unit vessels associated with the delayed coking unit during the year. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberInputValue Y IVT-Y5060 Methane emission factor for delayed coking unit from unit-specific measurement data. This data element is required. Please enter the required data or click CANCEL. emfdcuInputValue Y IVT-Y5063 Mass of water in the delayed coking unit vessel at the end of the cooling cycle just prior to atmospheric venting. This data element is required. mwaterOutputValue Y IVT-Y5064 Typical dry mass of coke in the delayed coking unit vessel at the end of the coking cycle as determined in paragraph (i)(1) of this section. This data element is required. mcokeOutputValue Y IVT-Y5065 Average temperature of the delayed coking unit vessel when the drum is first vented to the atmosphere as determined in paragraph (i)(3) of this section. This data element is required. tinitialOutputValue Y IVT-Y5067 Enter Own result for Annual CH4 emissions from delayed coking unit. This data element is required if you select Enter/Report Alternate Result. officialUnroundedCh4 Y IVT-Y5068 Annual CH4 emissions from this delayed coking unit. The calculated value is less than zero. officialUnroundedCh4 Y IVT-Y5069 Internal height of delayed coking unit vessel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. hdrumInputValue Y IVT-Y5070 Typical distance from the top of the delayed coking unit vessel to the top of the coke bed (i.e., coke drum outage) at the end of the coking cycle from company records or engineering estimates. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. houtageInputValue Y IVT-Y5071 Diameter of delayed coking unit vessel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. diameterY18aInputValue Y IVT-Y5072 Diameter of delayed coking unit vessel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. diameterY18bInputValue Y IVT-Y5073 Typical dry mass of coke in the delayed coking unit vessel at the end of the coking cycle as determined in paragraph (i)(1) of this section. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. mcokeInputValue Y IVT-Y5074 Temperature of the delayed coking unit vessel near the bottom of the coke bed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. tbottomInputValue Y IVT-Y5075 Methane emission factor for delayed coking unit from unit-specific measurement data. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. emfdcuInputValue Y IVT-Y5076 Temperature of the delayed coking unit vessel overhead line measured as near the coking unit vessel as practical just prior to venting to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. toverheadInputValue Y IVT-Y5077 You have not yet added any equation inputs data for the CH4 emissions from this delayed coking unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this facility. systemCalculatedUnroundedCh4 Y UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName Y UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType Y Y000 You have selected Subpart Y for reporting, but you have not yet indicated if the facility sends a sour gas stream off-site for sulfur recovery. This data element is required. Please make a selection. hasSourGasSentOffsite Y Y002 Control device used to reduce methane (and other organic) emissions from the unit. This data element is required. controlDeviceCh4Reduction Y Y003 Control device used to reduce methane (and other organic) emissions from the unit. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. controlDeviceCh4ReductionOther Y Y005 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 Y Y006 Annual CO2 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y007 Annual CO2 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y009 Basis for the CO2 emissions factor. This data element is required. efCo2Basis Y Y010 Basis for the CO2 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. efCo2BasisOther Y Y011 Annual CH4 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y012 Annual CH4 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y014 Basis for the CH4 emission factor. This data element is required. efCh4Basis Y Y015 Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. efCh4BasisOther Y Y016 Annual CO2 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y017 Annual CO2 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y019 Basis for the carbon emission factor. This data element is required. efCBasis Y Y020 Basis for the carbon emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. efCBasisOther Y Y021 Annual CH4 emissions rate from this asphalt blowing unit. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y022 Annual CH4 emissions rate from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y024 Basis for the CH4 emission factor. This data element is required. efCh4Basis Y Y025 Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. efCh4BasisOther Y Y026 Annual CO2 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y027 Annual CO2 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y029 Basis for the CO2 emission factor. This data element is required. efCo2Basis Y Y030 Basis for the CO2 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. efCo2BasisOther Y Y031 Basis for the carbon emission factor. This data element is required. efCBasis Y Y032 Basis for the carbon emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. efCBasisOther Y Y033 Annual CH4 emissions from this asphalt blowing unit. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y034 Annual CH4 emissions from this asphalt blowing unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y036 Basis for the CH4 emission factor. This data element is required. efCh4Basis Y Y037 Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. efCh4BasisOther Y Y038 You have selected Subpart Y for reporting, but you have not yet selected an Uncontrolled Blowdown Systems calculation method. This data element is required. Please make a selection. calculationMethod Y Y039 Annual CH4 emissions from uncontrolled blowdown systems. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y040 Annual CH4 emissions from blowdown systems. The value you have provided is more than the largest value EPA expects to be reported for this data element (values expected to be between 0 and 1000, metric tons). Please double check this value and the units of measure and revise, if necessary. officialUnroundedCh4 Y Y042 Basis for the methane emission factor value. This data element is required. eFBDBasis Y Y043 Annual volumetric flow discharged to the atmosphere. This data element is required. Please enter the required data. volumetricFlowRate Y Y044 Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. volumetricFlowRate Y Y046 Method used to measure or estimate the annual volumetric flow rate. This data element is required. volumetricFlowRateBasis Y Y047 Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. volumetricFlowRateBasisOther Y Y049 Number of cumulative venting events for all relevant vents, if vents are intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numVentingEvents Y Y051 Cumulative venting time for all relevant vents. This data element is required. Please enter the required data. cumulativeVentingTime Y Y052 Cumulative venting time for all relevant vents. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. cumulativeVentingTime Y Y055 Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. hasCEMS Y Y057 Maximum rated throughput of the coke calcining unit. This data element is required. Please enter the required data. ratedThroughput Y Y058 Maximum rated throughput of the coke calcining unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedThroughput Y Y060 Method used to calculate the CH4 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCh4 Y Y061 Method used to calculate the N2O emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodN2o Y Y062 Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. hasCEMS Y Y063 Method used to calculate CH4 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCh4 Y Y064 Method used to calculate N2O emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodN2o Y Y065 Annual CO2 emissions from this coke calcining unit. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y068 Method used to measure the annual carbon content of green coke fed to the unit. This data element is required. mInCarbonMeasureMethod Y Y069 Method used to measure the annual carbon content of marketable coke produced. This data element is required. mOutCarbonMeasureMethod Y Y070 Description of coke dust recycling for the unit. This data element is required. cokeDustRecyclingMethod Y Y071 Annual CH4 emissions from this coke calcining unit. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y072 Annual CH4 emissions from this coke calcining unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y075 Basis for the CH4 emission factor. This data element is required. unitEfCh4Basis Y Y076 Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. unitEfCh4BasisOther Y Y077 Annual N2O emissions from this coke calcining unit. This data element is required. Please enter the required data. officialUnroundedN2o Y Y078 Annual N2O emissions from this coke calcining unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Y Y080 Basis for the N2O emission factor. This data element is required. unitEfN2oBasis Y Y081 Basis for the N2O emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. unitEfN2oBasisOther Y Y084 Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. hasCEMS Y Y086 Maximum rated throughput of the unit. This data element is required. Please enter the required data. ratedThroughput Y Y087 Maximum rated throughput of the unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedThroughput Y Y089 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 Y Y090 Method used to calculate the CH4 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCh4 Y Y091 Method used to calculate the N2O emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodN2o Y Y092 Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. hasCEMS Y Y093 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 Y Y094 Method used to calculate the CH4 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCh4 Y Y095 Method used to calculate the N2O emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodN2o Y Y096 Annual CO2 emissions from this fluid catalytic cracking unit. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y097 Annual CO2 emissions from this fluid catalytic cracking unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y099 Total number of regeneration cycles or measurement periods. This data element is required. Please enter the required data. numberOfRegenerationCycles Y Y100 Total number of regeneration cycles or measurement periods. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfRegenerationCycles Y Y102 Are the GHG emissions from the low heat value gas accounted for in Subpart C? This data element is required. Please make a selection or click CANCEL. lowHeatValueAccountedForInSpC Y Y103 Basis for the carbon content value. This data element is required. carbonContentBasis Y Y104 Basis for the carbon content value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonContentBasisOther Y Y105 Annual average volumetric flow rate of exhaust gas from this fluid catalytic cracking unit prior to the combustion of other fossil fuels. This data element is required. Please enter the required data. exhaustGasFlowRate Y Y106 Annual average volumetric flow rate of exhaust gas from this fluid catalytic cracking unit prior to the combustion of other fossil fuels. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. exhaustGasFlowRate Y Y108 Number of hours missing data procedures were used for annual average volumetric flow rate of exhaust gas. This data element is required. Please enter the required data. exhaustGasFlowRateHoursMissingProcedures Y Y109 Number of hours missing data procedures were used for annual average volumetric flow rate of exhaust gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. exhaustGasFlowRateHoursMissingProcedures Y Y111 Annual average percent CO2 in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasCo2Concentration Y Y112 Annual average percent CO2 in exhaust gas stream. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. exhaustGasCo2Concentration Y Y114 Number of hours missing data procedures were used for annual average percent CO2 in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasCo2ConcentrationHoursMissingProcedures Y Y115 Number of hours missing data procedures were used for annual average percent CO2 in exhaust gas stream. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. exhaustGasCo2ConcentrationHoursMissingProcedures Y Y117 Annual average flow rate of inlet air. This data element is required. Please enter the required data. inletAirFlowRate Y Y118 Annual average flow rate of inlet air. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. inletAirFlowRate Y Y120 Annual average flow rate of oxygen enriched air. This data element is required. Please enter the required data. oxygenEnrichedFlowRate Y Y121 Annual average flow rate of oxygen enriched air. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. oxygenEnrichedFlowRate Y Y123 Annual average percent O2 in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasO2Concentration Y Y124 Annual average percent O2 in exhaust gas stream. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. exhaustGasO2Concentration Y Y126 Number of hours missing data procedures were used for annual average percent O2 in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasO2ConcentrationHoursMissingProcedures Y Y127 Number of hours missing data procedures were used for annual average percent O2 in exhaust gas stream. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. exhaustGasO2ConcentrationHoursMissingProcedures Y Y129 Annual average percent N2 in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasN2Concentration Y Y130 Annual average percent N2 in exhaust gas stream. This value should be reported as a percentage, and should be within the range of 0 to 100 %. The value you provided is outside that range. You must correct the current value before continuing. exhaustGasN2Concentration Y Y132 Number of hours missing data procedures were used for annual average percent N2 in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasN2ConcentrationHoursMissingProcedures Y Y133 Number of hours missing data procedures were used for annual average percent N2 in exhaust gas stream. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. exhaustGasN2ConcentrationHoursMissingProcedures Y Y135 Describe the method that was used to measure annual average percent N2 in exhaust gas stream. This data element is required. exhaustGasN2ConcentrationBasis Y Y136 Annual average percent N2 in oxygen-enriched gas stream inlet. This data element is required. Please enter the required data. oxygenEnrichedN2Concentration Y Y136a Annual average percent O2 in oxygen-enriched gas stream inlet. This data element is required. Please enter the required data. oxygenEnrichedO2Concentration Y Y136b Annual average percent O2 in oxygen-enriched gas stream inlet. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. oxygenEnrichedO2Concentration Y Y137 Annual average percent N2 in oxygen-enriched gas stream inlet. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. oxygenEnrichedN2Concentration Y Y139 Describe the method that was used to measure annual average percent N2 in oxygen-enriched gas stream inlet. This data element is required. oxygenEnrichedN2ConcentrationBasis Y Y140 Number of hours missing data procedures were used for annual average percent N2 in oxygen-enriched gas stream inlet. This data element is required. Please enter the required data. oxygenEnrichedN2ConcentrationHoursMissingProcedures Y Y141 Number of hours missing data procedures were used for annual average percent N2 in oxygen-enriched gas stream inlet. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. oxygenEnrichedN2ConcentrationHoursMissingProcedures Y Y143 Annual average percent CO in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasCoConcentration Y Y144 Annual average percent CO in exhaust gas stream. This value should be reported as a percentage, and should be within the range of 0 to 100%. The value you provided is outside that range. You must correct the current value before continuing. exhaustGasCoConcentration Y Y146 Number of hours missing data procedures were used for annual average percent CO in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasCoConcentrationHoursMissingProcedures Y Y147 Number of hours missing data procedures were used for annual average percent CO in exhaust gas stream. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. exhaustGasCoConcentrationHoursMissingProcedures Y Y149 Annual CH4 emissions from the cracking/coking/reforming unit. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y150 Annual CH4 emissions from the cracking/coking/reforming unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y152 Basis for the CH4 emission factor. This data element is required. unitEfCh4Basis Y Y153 Basis for the CH4 emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. unitEfCh4BasisOther Y Y154 Annual N2O emissions from the cracking/coking/reforming unit. This data element is required. Please enter the required data. officialUnroundedN2o Y Y155 Annual N2O emissions from the cracking/coking/reforming unit. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Y Y157 Basis for the N2O emission factor. This data element is required. unitEfN2oBasis Y Y158 Basis for the N2O emission factor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. unitEfN2oBasisOther Y Y159 Coking drum name or ID. This data element is required. Please enter the required data or click CANCEL. drumId Y Y160 Typical drum outage for coking drum(s) or ID(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. drumOutage Y Y161 Typical drum outage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. drumOutage Y Y165 Method used for calculation. This data element is required. Please make a selection or click CANCEL. calculationMethod Y Y166 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 Y Y169 You have selected Subpart Y for reporting, but you have not yet selected a method used to calculate the methane emissions from Equipment Leaks. This data element is required. Please make a selection. calculationMethod Y Y170 Annual CH4 emissions from equipment leaks. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y171 Annual CH4 emissions from equipment leaks. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y173 Cumulative CH4 emissions for all equipment leak sources. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y174 Cumulative CH4 emissions for all equipment leak sources. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y174b You have reported a non-zero value for the annual quantity of CH4 emissions for equipment leaks, but the total number of pieces of equipment of all types is zero. Please enter the number of each equipment type. officialUnroundedCh4 Y Y176 Cumulative number of catalytic cracking units, coking units, hydrocracking, and full-range distillation columns at the facility. This data element is required. Please enter the required data. numNPU1 Y Y177 Cumulative number of catalytic cracking units, coking units, hydrocracking, and full-range distillation columns at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numNPU1 Y Y179 Cumulative number of hydrotreating/hydrorefining units, catalytic reforming units, and visbreaking units at the facility. This data element is required. Please enter the required data. numNPU2 Y Y180 Cumulative number of hydrotreating/hydrorefining units, catalytic reforming units, and visbreaking units at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numNPU2 Y Y182 Total number of hydrogen plants at the facility. This data element is required. Please enter the required data. numNH2 Y Y183 Total number of hydrogen plants at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numNH2 Y Y185 Total number of fuel gas systems at the facility. This data element is required. Please enter the required data. numNFGS Y Y186 Total number of fuel gas systems at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numNFGS Y Y188 Number of atmospheric crude oil distillation columns at the facility. This data element is required. Please enter the required data. numNCD Y Y189 Number of atmospheric crude oil distillation columns at the facility. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numNCD Y Y192 Type of flare. This data element is required. Please make a selection. flareType Y Y193 Flare service type. This data element is required. Please make a selection. flareServiceType Y Y194 Flare service type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. flareServiceTypeOther Y Y195 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 Y Y196 Equation Y-1a Inputs Method. This data element is required. Please make a selection or click CANCEL. equationY1aInputsMethod Y Y201 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y202 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y204 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency Y Y205 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume Y Y206 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume Y Y208 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures Y Y209 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures Y Y211 Annual average molecular weight. This data element is required. Please enter the required data. avgMolecularWeight Y Y212 Annual average molecular weight. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. avgMolecularWeight Y Y214 Method(s) used to determine the molecular weight of the flare gas. This data element is required. avgMolecularWeightMethods Y Y215 Number of days missing data procedures were used for annual average molecular weight of the flare gas. This data element is required. Please enter the required data. avgMolecularWeightDaysMissingProcedures Y Y216 Number of days missing data procedures were used for annual average molecular weight of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgMolecularWeightDaysMissingProcedures Y Y218 Annual average carbon content of the flare gas. This data element is required. Please enter the required data. avgCarbonContent Y Y219 Annual average carbon content of the flare gas. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1. The value you provided is outside that range. You must correct the current value before continuing. avgCarbonContent Y Y221 Method(s) used to determine the carbon content of the flare gas. This data element is required. avgCarbonContentMethods Y Y222 Number of days missing data procedures were used for average carbon content of the flare gas. This data element is required. Please enter the required data. avgCarbonContentDaysMissingProcedures Y Y223 Number of days missing data procedures were used for average carbon content of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgCarbonContentDaysMissingProcedures Y Y225 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y226 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y228 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency Y Y229 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume Y Y230 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume Y Y232 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures Y Y233 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures Y Y235 Annual average CO2 concentration. This data element is required. Please enter the required data. avgCo2Concentration Y Y236 Annual average CO2 concentration. This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. avgCo2Concentration Y Y238 Method used to determine the annual average CO2 concentration. This data element is required. avgCo2ConcentrationBasis Y Y239 Number of days missing data procedures were used for annual average CO2 concentration. This data element is required. Please enter the required data. avgCo2ConcentrationDaysMissingProcedures Y Y240 Number of days missing data procedures were used for annual average CO2 concentration. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgCo2ConcentrationDaysMissingProcedures Y Y242 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y243 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y245 Frequency of measurement data. This data element is required. Please make a selection. measurementFrequency Y Y246 Annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolume Y Y247 Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasVolume Y Y249 Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasVolumeDaysMissingProcedures Y Y250 Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasVolumeDaysMissingProcedures Y Y252 Conditions on which the annual volume of flare gas was determined. This data element is required. Please make a selection. annualFlareGasVolumeConditions Y Y253 Annual average higher heating value of the flare gas combusted. This data element is required. Please enter the required data. avgHighHeatingValue Y Y254 Annual average higher heating value of the flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. avgHighHeatingValue Y Y256 Method used to determine the annual average higher heating value. This data element is required. avgHighHeatingValueBasis Y Y257 Number of days missing data procedures were used for annual average higher heating value. This data element is required. Please enter the required data. avgHighHeatingValueDaysMissingProcedures Y Y258 Number of days missing data procedures were used for annual average higher heating value. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. avgHighHeatingValueDaysMissingProcedures Y Y260 Conditions on which the annual average higher heating value was determined. This data element is required. Please make a selection. avgHighHeatingValueConditions Y Y261 Annual CO2 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y262 Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y264 Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. This data element is required. Please enter the required data. numberOfSSMEventsExceeding500K Y Y265 Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfSSMEventsExceeding500K Y Y267 Material type. This data element is required. Please make a selection or click CANCEL. materialType Y Y268 Material type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. materialTypeOther Y Y269 Control device used to reduce emissions from the loading of the material. This data element is required. Please make a selection or click CANCEL. controlDeviceEmissionsReduction Y Y270 Control device used to reduce emissions from the loading of the material. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. controlDeviceEmissionsReductionOther Y Y271 Vessel type. This data element is required. Please make a selection or click CANCEL. vesselType Y Y271a Vessel type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. vesselTypeOther Y Y272 Cumulative CH4 emissions for loading operations. This data element is required. Please enter the required data. Enter 0 if your facility has no loading operations or if the 0.5 volume % or greater requirement is not met. officialUnroundedCh4 Y Y273 Cumulative CH4 emissions for loading operations. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. Enter 0 if your facility has no loading operations or if the 0.5 volume % or greater requirement is not met. officialUnroundedCh4 Y Y276 Operation type associated with this process vent. This data element is required. operationType Y Y277 Control device used to reduce methane (and other organic) emissions from the unit. This data element is required. Please make a selection. controlDeviceCh4Reduction Y Y278 Control device used to reduce methane (and other organic) emissions from the unit. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. controlDeviceCh4ReductionOther Y Y279 Please select the greenhouse gas(es) you will report for this process vent, or click CANCEL. isReportingCo2 Y Y282 Annual volumetric flow discharged to the atmosphere. This data element is required. volumetricFlowRate Y Y282-2 Annual volumetric flow discharged to the atmosphere. This data element is required. volumetricFlowRate Y Y283 Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. volumetricFlowRate Y Y283-2 Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. volumetricFlowRate Y Y285 Method used to measure or estimate the annual volumetric flow rate. This data element is required. volumetricFlowRateBasis Y Y285-2 Method used to measure or estimate the annual volumetric flow rate. This data element is required. volumetricFlowRateBasis Y Y286 Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. volumetricFlowRateBasisOther Y Y286-2 Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. volumetricFlowRateBasisOther Y Y288 Number of venting events, if vent is intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numVentingEvents Y Y288-2 Number of venting events, if vent is intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numVentingEvents Y Y288-3 Number of venting events, if vent is intermittent. This data element is required. numVentingEvents Y Y290 Cumulative venting time. This data element is required. Please enter the required data. cumulativeVentingTime Y Y290-2 Cumulative venting time. This data element is required. Please enter the required data. cumulativeVentingTime Y Y291 Cumulative venting time. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. cumulativeVentingTime Y Y291-2 Cumulative venting time. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. cumulativeVentingTime Y Y293 Annual CO2 emissions from this process vent. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y294 Annual CO2 emissions from this process vent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y296 Annual average mole fraction of CO2. This data element is required. Please enter the required data. avgMoleFractionCo2 Y Y297 Annual average mole fraction of CO2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. avgMoleFractionCo2 Y Y299 Method used to measure or estimate the annual average mole fraction of CO2. This data element is required. avgMoleFractionCo2Basis Y Y300 Method used to measure or estimate the annual average mole fraction of CO2. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMoleFractionCo2BasisOther Y Y301 Annual CH4 emissions from this process vent. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y302 Annual CH4 emissions from this process vent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y304 Annual average mole fraction of CH4. This data element is required. Please enter the required data. avgMoleFractionCh4 Y Y304-2 Annual average mole fraction of CH4. This data element is required. Please enter the required data. avgMoleFractionCh4 Y Y305 Annual average mole fraction of CH4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. avgMoleFractionCh4 Y Y305-2 Annual average mole fraction of CH4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. avgMoleFractionCh4 Y Y307 Method used to measure or estimate the annual average mole fraction of CH4. This data element is required. avgMoleFractionCh4Basis Y Y307-2 Method used to measure or estimate the annual average mole fraction of CH4. This data element is required. avgMoleFractionCh4Basis Y Y308 Method used to measure or estimate the annual average mole fraction of CH4. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMoleFractionCh4BasisOther Y Y308-2 Method used to measure or estimate the annual average mole fraction of CH4. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMoleFractionCh4BasisOther Y Y308-3 Inputs for {1} drumset is required, select the GO button to enter the cumulative CH4 emissions from all delayed coking units at the facility for the {1} drumset. inputEntered Y Y309 Annual N2O emissions from this process vent. This data element is required. Please enter the required data. officialUnroundedN2o Y Y310 Annual N2O emissions from this process vent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Y Y312 Annual average mole fraction of N2O. This data element is required. Please enter the required data. avgMoleFractionN2o Y Y313 Annual average mole fraction of N2O. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. avgMoleFractionN2o Y Y315 Method used to measure or estimate the annual average mole fraction of N2O. This data element is required. avgMoleFractionN2oBasis Y Y316 Method used to measure or estimate the annual average mole fraction of N2O. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMoleFractionN2oBasisOther Y Y317 Annual CO2 emissions from sour gas sent off-site. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y318 Annual CO2 emissions from sour gas sent off-site. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y321 If measured, number of hours missing data procedures were used for annual volume of sour gas fed. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. annualVolumeSourGasHoursMissingProcedures Y Y325 If measured, number of hours missing data procedures were used for annual average mole fraction of carbon in the sour gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. carbonFractionSourGasHoursMissingProcedures Y Y327 Sulfur Recovery Plant Name or ID. This data element is required. Please enter the required data or click CANCEL. groupUnitName Y Y328 Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. hasCEMS Y Y329 Sulfur Recovery Plant Name or ID. This data element is required. Please enter the required data or click CANCEL. groupUnitName Y Y330 Maximum rated throughput of the sulfur recovery plant. This data element is required. Please enter the required data. ratedThroughput Y Y331 Maximum rated throughput of the sulfur recovery plant. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. ratedThroughput Y Y333 Type of sulfur recovery plant. This data element is required. plantType Y Y334 Type of sulfur recovery plant. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. plantTypeOther Y Y335 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 Y Y336 Is the recycled flow rate and carbon content of recycled tail gas included in the measured volumetric flow and carbon mole fraction data? This data element is required. Please make a selection or click CANCEL. carbonContentInRecycledGasIncludedInFlowData Y Y337 Is a correction for CO2 emissions in the tail gas used? This data element is required. Please make a selection or click CANCEL. tailGasCo2EmissionsCorrection Y Y338 Please indicate if this unit is monitored by a Continuous Emissions Monitoring System (CEMS), or click CANCEL. hasCEMS Y Y339 Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. calculationMethodCo2 Y Y340 Is the recycled flow rate and carbon content of recycled tail gas included in the measured volumetric flow and carbon mole fraction data? This data element is required. Please make a selection or click CANCEL. carbonContentInRecycledGasIncludedInFlowData Y Y341 Is a correction for CO2 emissions in the tail gas used? This data element is required. Please make a selection or click CANCEL. tailGasCo2EmissionsCorrection Y Y342 Annual CO2 emissions from this sulfur recovery plant. This data element is required. Please enter the required data. officialUnroundedCo2 Y Y343 Annual CO2 emissions from this sulfur recovery plant. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCo2 Y Y346 If measured, number of hours missing data procedures were used for annual volume of sour gas fed. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. annualVolumeSourGasHoursMissingProcedures Y Y350 If measured, number of hours missing data procedures were used for annual average mole fraction of carbon in the sour gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. carbonFractionSourGasHoursMissingProcedures Y Y353 Annual volume of recycled tail gas. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualVolumeTailGas Y Y355 If measured, method used to measure the annual volume of recycled tail gas. You have provided a value for annual volume of recycled tail gas but did not specify a measurement method. annualVolumeTailGasMethod Y Y356 If measured, method used to measure the annual volume of recycled tail gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. annualVolumeTailGasMethodDetail Y Y357 If measured, number of hours missing data procedures were used for annual volume of recycled tail gas. This data element is required. You have provided a value for annual volume of recycled tail gas but did not specify number of hours missing data procedures were used. annualVolumeTailGasHoursMissingProcedures Y Y358 If measured, number of hours missing data procedures were used for annual volume of recycled tail gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. annualVolumeTailGasHoursMissingProcedures Y Y361 Annual average mole fraction of carbon in the tail gas. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. carbonFractionTailGas Y Y363 If measured, method used to measure the annual average mole fraction of carbon in the tail gas. You have provided a value for annual average mole fraction of carbon in the tail gas but did not specify a measurement method. carbonFractionTailGasMethod Y Y364 If measured, method used to measure the annual average mole fraction of carbon in the tail gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionTailGasMethodOther Y Y365 If measured, number of hours missing data procedures were used for annual average mole fraction of carbon in the sour gas. You have provided a value for annual average mole fraction of carbon in the tail gas but did not specify number of hours missing data procedures were used. carbonFractionTailGasHoursMissingProcedures Y Y366 If measured, number of hours missing data procedures were used for annual average mole fraction of carbon in the sour gas. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. carbonFractionTailGasHoursMissingProcedures Y Y368 Annual volumetric flow discharged to the atmosphere. This data element is required. Please enter the required data. volumetricFlowRate Y Y369 Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. volumetricFlowRate Y Y371 Method used to measure or estimate the annual volumetric flow rate. This data element is required. volumetricFlowRateBasis Y Y372 Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. volumetricFlowRateBasisOther Y Y374 Number of cumulative venting events for all relevant vents, if vents are intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numVentingEvents Y Y379 Cumulative venting time for all relevant vents. This data element is required. Please enter the required data. cumulativeVentingTime Y Y380 Cumulative venting time for all relevant vents. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. cumulativeVentingTime Y Y382 Correction factor used to calculate CO2 emissions. This data element is required. Please make a selection or click CANCEL. correctionFactor Y Y383 Method used to determine correction factor used to calculate the CO2 emissions. This data element is required. correctionFactorBasis Y Y384 Method used to determine correction factor used to calculate the CO2 emissions. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. correctionFactorBasisOther Y Y385 You have selected Subpart Y for reporting, but you have not yet indicated if the facility received stored liquids other than unstabilized crude during the reporting year. This data element is required. Please make a selection. hasStoredStabilizedCrudeOil Y Y386 You have selected Subpart Y for reporting, but you have not yet indicated if the facility received unstabilized crude oil during the reporting year. This data element is required. Please make a selection. hasStoredUnstabilizedCrudeOil Y Y387 You have indicated that the facility received liquids other than unstabilized crude oil, however you have not yet selected an emissions calculation method.. This data element is required. Please make a selection. stabilizedCrudeOilCalculationMethod Y Y388 You have indicated that the facility received unstabilized crude oil, however you have not yet selected an emissions calculation method. This data element is required. Please make a selection. unstabilizedCrudeOilCalculationMethod Y Y395 Method used to measure tank-specific methane composition in the vapor. This data element is required. tankSpecificMeasurementMethod Y Y396 Method used to measure tank-specific methane composition in the vapor. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. tankSpecificMeasurementMethodOther Y Y398 If measured, number of hours missing data procedures were used to measure tank-specific methane composition. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. tankSpecificMeasurementMethodHoursMissingDataProcedures Y Y400 Method used to measure the gas generation rate. This data element is required. gasGenerationRateMethod Y Y400a Specify procedures. This data element is required. Please enter the required data. gasGenerationRateMethodText Y Y400b Specify method. This data element is required. Please enter the required data. gasGenerationRateMethodText Y Y402 If measured, number of hours missing data procedures were used to measure the gas generation rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. gasGenerationRateMethodHoursMissingDataProcedures Y Y404 Basis for the average mole fraction of CH4 in vent gas. This data element is required. moleFractionBasis Y Y405 Basis for the average mole fraction of CH4 in vent gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. moleFractionBasisOther Y Y406 Annual CH4 emissions from unstabilized crude oil storage. This data element is required. Please enter the required data. unstabilizedCrudeOilEmissions.officialUnroundedCh4 Y Y407 Annual CH4 emissions from unstabilized crude oil storage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. unstabilizedCrudeOilEmissions.officialUnroundedCh4 Y Y409 Annual CH4 emissions from stored liquids other than unstabilized crude oil storage. This data element is required. Please enter the required data. stabilizedCrudeOilEmissions.officialUnroundedCh4 Y Y410 Annual CH4 emissions from stored liquids other than unstabilized crude oil. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. stabilizedCrudeOilEmissions.officialUnroundedCh4 Y Y412 Coking drum set name or ID. This data element is required. Please enter the required data or click CANCEL. drumSetId Y Y413 Number of coking drums in the set, {1}. This data element is required. Please enter the required data. numberOfDrumsInSet Y Y414 Number of coking drums in the set. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numberOfDrumsInSet Y Y416 Basis for the mole fraction of methane in the coking gas in {1}. This data element is required. moleFractionBasis Y Y417 Basis for the mole fraction of methane in the coking gas in {1}. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. moleFractionBasisOther Y Y418 Method used to measure or estimate the annual volumetric flow rate in {1}. This data element is required. volumetricFractionBasis Y Y419 Method used to measure or estimate the annual volumetric flow rate in {1}. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. volumetricFractionBasisOther Y Y423 Annual average concentration of each carbon-containing compound (other than CO2). This data element is required. Please enter the required data or click CANCEL. annualAverageConcentration Y Y424 Annual average concentration of each carbon-containing compound (other than CO2). This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. annualAverageConcentration Y Y426 Method(s) used to determine the annual average concentration of the carbon-containing compound(s). This data element is required. annualAverageConcentrationMethods Y Y426a Method(s) used to determine the annual average concentration of the carbon-containing compound(s). You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. annualAverageConcentrationMethodsOther Y Y427 Number of days missing data procedures were used for annual average concentration of carbon in the compound. This data element is required. Please enter the required data or click CANCEL. annualAverageConcentrationDaysMissingProcedures Y Y428 Number of days missing data procedures were used for annual average concentration of carbon in the compound. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualAverageConcentrationDaysMissingProcedures Y Y431 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y436 Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. carbonFractionBasis Y Y437 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther Y Y438 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o Y Y439 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Y Y442 Carbon-containing compound (other than carbon dioxide) in flare gas stream. You must enter at least one carbon-containing compound other than carbon dioxide in flare gas stream. This is a required field. carbonCompounds Y Y445 You have added a delayed coking unit, but have not entered any coke drums for this unit. cokingDrums Y Y446 You have selected Subpart Y for reporting, but you have not yet added a flare. flareUnits Y Y447 Basis for the methane emission factor value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. eFBDBasisOther Y Y448 Method used to measure the annual carbon content of green coke fed to the unit. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. mInCarbonMeasureMethodOther Y Y449 Method used to measure the annual carbon content of marketable coke produced. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. mOutCarbonMeasureMethodOther Y Y450 Describe the method that was used to measure annual average percent N2 in exhaust gas stream. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. exhaustGasN2ConcentrationBasisOther Y Y451 Describe the method that was used to measure annual average percent N2 in oxygen-enriched gas stream inlet. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. oxygenEnrichedN2ConcentrationBasisOther Y Y452 Method(s) used to determine the molecular weight of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMolecularWeightMethodsOther Y Y453 Method(s) used to determine the carbon content of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgCarbonContentMethodsOther Y Y454 Method used to determine the annual average CO2 concentration. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgCo2ConcentrationBasisOther Y Y455 Method used to determine the annual average higher heating value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgHighHeatingValueBasisOther Y Y458 You have reported cumulative CH4 emissions from loading operations, but have not entered a vessel type. vessels Y Y459 You are using Equations Y-18 and Y-19 as the emission calculation method for a delayed coking unit, but have not entered any process vents with an operation type of \'delayed coking\'. none Y Y460 Annual average mole fraction of CH4. This data element is required. Please enter the required data. avgMoleFractionCh4 Y Y461 Annual average mole fraction of CH4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. avgMoleFractionCh4 Y Y463 Method used to measure or estimate the annual average mole fraction of CH4. This data element is required. avgMoleFractionCh4Basis Y Y464 Method used to measure or estimate the annual average mole fraction of CH4. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMoleFractionCh4BasisOther Y Y465 Annual average mole fraction of CO2. This data element is required. Please enter the required data. avgMoleFractionCo2 Y Y466 Annual average mole fraction of CO2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. avgMoleFractionCo2 Y Y468 Method used to measure or estimate the annual average mole fraction of CO2. This data element is required. avgMoleFractionCo2Basis Y Y469 Method used to measure or estimate the annual average mole fraction of CO2. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMoleFractionCo2BasisOther Y Y470 Average coke burn-off quantity per cycle or measurement period. This data element is required. Please enter the required data. avgCokeBurnOffPerCycle Y Y471 Annual volumetric flow discharged to the atmosphere. This data element is required. Please enter the required data. volumetricFlowRate Y Y472 Method used to measure or estimate the annual volumetric flow rate. This data element is required. volumetricFlowRateBasis Y Y473 Method used to measure or estimate the annual volumetric flow rate. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. volumetricFlowRateBasisOther Y Y474 Number of cumulative venting events for all relevant vents, if vents are intermittent. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. numVentingEvents Y Y476 Cumulative venting time for all relevant vents. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. cumulativeVentingTime Y Y481 Annual average mole fraction of CO2. This data element is required. Please enter the required data. avgMoleFractionCo2 Y Y482 Annual average mole fraction of CO2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. avgMoleFractionCo2 Y Y484 Method used to measure or estimate the annual average mole fraction of CO2. This data element is required. avgMoleFractionCo2Basis Y Y485 Method used to measure or estimate the annual average mole fraction of CO2. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMoleFractionCo2BasisOther Y Y486 Annual average mole fraction of CH4. This data element is required. Please enter the required data. avgMoleFractionCh4 Y Y487 Annual average mole fraction of CH4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. avgMoleFractionCh4 Y Y489 Method used to measure or estimate the annual average mole fraction of CH4. This data element is required. avgMoleFractionCh4Basis Y Y490 Method used to measure or estimate the annual average mole fraction of CH4. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. avgMoleFractionCh4BasisOther Y Y491 Flare type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. flareTypeOther Y Y495 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure Y Y496 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure Y Y497 Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. flowMeterProcedure Y Y498 Describe the manufacturer/s recommended method that was used for annual average volumetric flow rate of exhaust gas. This data element is required. Please enter the required data. exhaustGasFlowRateMethod Y Y499 Describe the manufacturer/s recommended method that was used for annual average percent CO2 in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasCo2ConcentrationMethod Y Y500 Describe the manufacturer/s recommended method that was used for annual average percent CO in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasCoConcentrationMethod Y Y501 Describe the manufacturer/s recommended method that was used for annual average percent O2 in exhaust gas stream. This data element is required. Please enter the required data. exhaustGasO2ConcentrationMethod Y Y502 If measured, method used to measure the annual average mole fraction of carbon in the sour gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionSourGasMethodOther Y Y503 If measured, method used to measure the annual average mole fraction of carbon in the sour gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionSourGasMethodOther Y Y505 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther Y Y506 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther Y Y507 Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. carbonFractionBasisOther Y Y513 Annual CH4 emissions from this flare. This data element is required. Please enter the required data. officialUnroundedCh4 Y Y514 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y515 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y516 Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedCh4 Y Y517 Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. carbonFractionBasis Y Y518 Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. carbonFractionBasis Y Y519 Basis for the fraction of carbon in the flare gas contributed by methane. This data element is required. Please make a selection. carbonFractionBasis Y Y520 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o Y Y521 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o Y Y522 Annual N2O emissions from this flare. This data element is required. Please enter the required data. officialUnroundedN2o Y Y526 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Y Y527 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Y Y528 Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. officialUnroundedN2o Y Y529 Indication of stored liquids other than unstabilized crude oil storage. This data element is required. Please make a selection or click CANCEL. hasStoredStabilizedCrudeOil Y Y530 Indication of sour gas sent off-site. This data element is required. Please enter the required data or click CANCEL. hasSourGasSentOffsite Y Y531 Annual volumetric flow discharged to the atmosphere. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. volumetricFlowRate Y Y532 Method used to calculate the CH4 emissions from equipment leaks. This data element is required. Please make a selection or click CANCEL. calculationMethod Y Y533 Uncontrolled blowdown systems calculation method. This data element is required. Please make a selection or click CANCEL. calculationMethod Y Y534 Cumulative venting time for all relevant vents. This data element is required. Please enter the required data. cumulativeVentingTime Y Y535 Stored liquids other than unstabilized Crude Oil - Emissions Calculation. This data element is required. Please make a selection or click CANCEL. stabilizedCrudeOilCalculationMethod Y Y536 Indication of unstabilized crude oil storage. This data element is required. Please make a selection or click CANCEL. hasStoredUnstabilizedCrudeOil Y Y537 Unstabilized Crude Oil Storage - Emissions Calculation. This data element is required. Please make a selection or click CANCEL. unstabilizedCrudeOilCalculationMethod Y Y555 Is the flare serviced by a flare gas recovery system? This data element is required. Please make a selection. isTheFlareServicedByFlareGasRecoverySystem Y Y590 Annual mass of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasMass Y Y591 Annual mass of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualFlareGasMass Y Y593 Method(s) used to determine the mass of flare gas. This data element is required. Please enter the required data. massFlareGasMethods Y Y594 Number of days missing data procedures were used for annual mass of flare gas combusted. This data element is required. Please enter the required data. annualFlareGasMassDaysMissingProcedures Y Y595 Number of days missing data procedures were used for annual mass of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. annualFlareGasMassDaysMissingProcedures Y Y600 You have added vessel type {1}, but have not yet entered any materials. You must add at least one material for each vessel. materials Y Y700 Indication of loading operations. This data element is required. Please enter the required data or click CANCEL. hasLoadingOperations Y Y777 The coking drum set "Name or ID" you are attempting to add is invalid because it already exists for this facility. Please enter a unique name, or click CANCEL. drumSetId Y Y779 You have selected Subpart Y for reporting, but for Loading Operations you have not yet indicated if you perform loading operations for crude oil, intermediate, or product, for which the vapor-phase concentration of methane is 0.5 volume percent or more. This data element is required. Please make a selection. hasLoadingOperations Y Y780 You have indicated that you perform loading operations for crude oil, intermediate, or product, for which the vapor-phase concentration of methane is 0.5 volume percent or more, but you have not added any vessels for loading operations. You must add a vessel type with at least one material. hasLoadingOperations Y Y883 Maximum rated throughput. This data element is required. Please enter the required data. ratedThroughput Y Y884 Maximum rated throughput. You must enter a value that is greater than zero. You must correct the current value before continuing. ratedThroughput Y Y886 Total number of associated delayed coking vessels (or coke drums). This data element is required. Please enter the required data. totalDelayedCokingVesselsOrCokeDrums Y Y888 Basis for the typical dry mass of coke at the end of the coking cycle. This data element is required. Please make a selection or click CANCEL. equationY18aOrCompanyRecords Y Y889 Method used to estimate the average temperature of the coke bed. This data element is required. Please make a selection or click CANCEL. equationY18cOrY18d Y Y890 Type of emission factor was used in Equation Y-18f. This data element is required. Please make a selection or click CANCEL. equationY18fEmissionFactorType Y Y891 Annual quantity of coke produced. This data element is required. Please enter the required data. annualQuantityOfCokeProduced Y Y892 Annual quantity of coke produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualQuantityOfCokeProduced Y Y900 For the CEMS Monitoring Location {1} which monitors a shared process/combustion stack, the total annual CO2 emissions measured by the CEMS of {2} metric tons does not equal the CO2 emissions attributable to combustion [{3} metric tons] plus the total CO2 emissions attributable to process emissions for all process units monitored by the CML [{4} metric tons]. Please address this critical error. Then you can return here to perform another final review and submit your report. data[totalAnnualCO2] Y Y901 For the single or multiple process stack on a FCCU or FCU [{1}], the total annual CO2 emissions measured by the CEMS [{2} (metric tons)] do not equal the sum of CO2 emissions attributable to the process units [{3} (metric tons)]. Please address this critical error. Then you can return here to perform another final review and submit your report. data[totalAnnualCO2] Y Y916 The process vent annual average mole fraction for CO2, CH4, and N2O must sum to be less than or equal to 1. Please address this critical error. Then you can return here to perform another final review and submit your report. data[yALG0031] Z CEMSML-1 Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). hasCEMSandNoCML Z CEMSML-2 CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. hasCEMSandNoCMLUnits Z CEMSML-3 The same name or identifier already exists for this CEMS monitoring location in this facility. Please enter a unique name or identifier. cml Z CML-027a Fraction of nitrous oxide emissions from CML. This data element is required. fractionN2oEmissions Z CML-038 Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. totalOperatingHrs Z CML-039 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingCo2Concnt Z CML-040 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasFlow Z CML-041 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. hrsMissingStackGasMoisture Z CML-043 The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. hrsMissingStackGasFlow Z CML-046 CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. processUnits Z CML-047a Fraction of methane emissions from CML. This data element is required. fractionCh4Emissions Z CML-051 Total Non-biogenic carbon dioxide emissions. This data element is required. totalNonbiogenicCo2emission Z CML-052 Total Biogenic carbon dioxide emissions. This data element is required. totalBiogenicCo2emission Z CML-053 Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totalch4emission Z CML-054 Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. totaln2oemission Z CML-055 Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. /GHG/FacilitySiteInformation/FacilitySiteDetails/ SubPartInformation/SubPart ”any”/Tier4CEMSDetails/AnnualCO2EmissionsMeasuredByCEMS totalCo2ByCemsOrPart75 If a subpart include CEM or Part75 reporting that subpart must include the <Tier4CEMSDetails> node with a <AnnualCO2EmissionsMeasuredByCEMS> with a non-null <CalculatedValue> Z CML-056 Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. totalCo2ByCemsOrPart75 Z CML-057 Total number of source operating hours in the reporting year. This data element is required. totalOperatingHrs Z CML-058 The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. hrsMissingCo2Concnt Z CML-059 You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is earlier than the End Date. methodologyEndDate Z CML-060 Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. methodologyStartDate Z CML-061 Configuration type. This data element is required. Please enter the required data or click CANCEL. cemsConfigType Z CML-062 Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. methodologyEndDate Z CML-063 Carbon dioxide emissions measured in Quarter 1. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 1'] Z CML-064 Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 1'] Z CML-065 Carbon dioxide emissions measured in Quarter 2. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 2'] Z CML-066 Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 2'] Z CML-067 Carbon dioxide emissions measured in Quarter 3. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 3'] Z CML-068 Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 3'] Z CML-069 Carbon dioxide emissions measured in Quarter 4. This data element is required. spcTier4EmissionDTO.emissionsMap['Quarter 4'] Z CML-070 Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. spcTier4EmissionDTO.emissionsMap['Quarter 4'] Z CML-071 CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. cmlName Z CML-072 Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. fuelsCombusted Z CML-076 Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. totalch4emission Z CML-077 Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. totaln2oemission Z CML-078 Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. fuelsCombusted Z CML-083 Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. combustionCo2Emissions Z CML-086 The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate Z CML-087 The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. methodologyStartDate Z CML-088 The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate Z CML-089 The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. methodologyEndDate Z UM-2 Unit Name or Identifier. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitName Z UM-3 Unit type. This data element is required. Please enter the required data or click CANCEL. GHG/FacilitySiteInformation/FacilitySiteDetails/SubPartInformation/SubPartWDeferred/SubPartWDeferredReportingFormsDetails/SubpartWDeferredSummaryDetails/SelectedIndustrySegmentName groupUnitType Z Z0031 Is the inorganic carbon content value a substitute value?[]. This data element is required for each month of the Reporting Year. phosphateRockOrigin Z Z0043 Is the mass consumed value a substitute data value?[]. This data element is required for each month of the Reporting Year. phosphateRockOrigin Z Z0055 Method used to estimate any missing values of inorganic carbon content[]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". phosphateRockOrigin Z Z0067 Is the carbon dioxide content of a grab sample batch a substitute data value?[]. This data element is required for each month of the Reporting Year. phosphateRockOrigin Z Z0079 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". phosphateRockOrigin Z Z008 Is this unit\'s emissions monitored using a CEMS? This data element is required. Please enter the required data or click CANCEL. hasCEMS Z Z009 Annual phosphoric acid production capacity. This data element is required. annualPhosphoricAcidProductionCapacity Z Z010 Annual phosphoric acid production capacity. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. annualPhosphoricAcidProductionCapacity Z Z012 Calculation Method. This data element is required. Please enter the required data or click CANCEL. calculationMeathod Z Z013 You have added a wet-process phosphoric acid line, but have not yet added an origin. feedstocks Z Z014 Origin of Phosphate Rock. This data element is required. Please enter the required data or click CANCEL. phosphateRockOrigin Z Z015 Origin of Phosphate Rock, Other. This data element is required when Origin of Phosphate is specified as "Other". otherOrigin Z Z016 Annual amount of phosphoric acid produced. This data element is required. phosphoricAcidProduced Z Z017 Annual amount of phosphoric acid produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. phosphoricAcidProduced Z Z019 Annual arithmetic average percent inorganic carbon, or the annual arithmetic average percent carbon dioxide (derived from monthly sampling records) (percent by weight, expressed as a decimal fraction). This data element is required. averagePercentInrganicCarbon Z Z020 Annual arithmetic average percent inorganic carbon, or the annual arithmetic average percent carbon dioxide (derived from monthly sampling records) (percent by weight, expressed as a decimal fraction). You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. averagePercentInrganicCarbon Z Z022 Annual amount of rock consumed. This data element is required. rockConsumed Z Z023 Annual amount of rock consumed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. rockConsumed Z Z031 Is the inorganic carbon content value a substitute value?[January]. This data element is required for each month of the Reporting Year. janCarbContentSDV Z Z032 Is the inorganic carbon content value a substitute value?[February]. This data element is required for each month of the Reporting Year. febCarbContentSDV Z Z033 Is the inorganic carbon content value a substitute value?[March]. This data element is required for each month of the Reporting Year. marCarbContentSDV Z Z034 Is the inorganic carbon content value a substitute value?[April]. This data element is required for each month of the Reporting Year. aprCarbContentSDV Z Z035 Is the inorganic carbon content value a substitute value?[May]. This data element is required for each month of the Reporting Year. mayCarbContentSDV Z Z036 Is the inorganic carbon content value a substitute value?[June]. This data element is required for each month of the Reporting Year. junCarbContentSDV Z Z037 Is the inorganic carbon content value a substitute value?[July]. This data element is required for each month of the Reporting Year. julCarbContentSDV Z Z038 Is the inorganic carbon content value a substitute value?[August]. This data element is required for each month of the Reporting Year. augCarbContentSDV Z Z039 Is the inorganic carbon content value a substitute value?[September]. This data element is required for each month of the Reporting Year. sepCarbContentSDV Z Z040 Is the inorganic carbon content value a substitute value?[October]. This data element is required for each month of the Reporting Year. octCarbContentSDV Z Z041 Is the inorganic carbon content value a substitute value?[November]. This data element is required for each month of the Reporting Year. novCarbContentSDV Z Z042 Is the inorganic carbon content value a substitute value?[December]. This data element is required for each month of the Reporting Year. decCarbContentSDV Z Z043 Is the mass consumed value a substitute data value?[January]. This data element is required for each month of the Reporting Year. janMassConsumedSDV Z Z044 Is the mass consumed value a substitute data value?[February]. This data element is required for each month of the Reporting Year. febMassConsumedSDV Z Z045 Is the mass consumed value a substitute data value?[March]. This data element is required for each month of the Reporting Year. marMassConsumedSDV Z Z046 Is the mass consumed value a substitute data value?[April]. This data element is required for each month of the Reporting Year. aprMassConsumedSDV Z Z047 Is the mass consumed value a substitute data value?[May]. This data element is required for each month of the Reporting Year. mayMassConsumedSDV Z Z048 Is the mass consumed value a substitute data value?[June]. This data element is required for each month of the Reporting Year. junMassConsumedSDV Z Z049 Is the mass consumed value a substitute data value?[July]. This data element is required for each month of the Reporting Year. julMassConsumedSDV Z Z050 Is the mass consumed value a substitute data value?[August]. This data element is required for each month of the Reporting Year. augMassConsumedSDV Z Z051 Is the mass consumed value a substitute data value?[September]. This data element is required for each month of the Reporting Year. sepMassConsumedSDV Z Z052 Is the mass consumed value a substitute data value?[October]. This data element is required for each month of the Reporting Year. octMassConsumedSDV Z Z053 Is the mass consumed value a substitute data value?[November]. This data element is required for each month of the Reporting Year. novMassConsumedSDV Z Z054 Is the mass consumed value a substitute data value?[December]. This data element is required for each month of the Reporting Year. decMassConsumedSDV Z Z055 Method used to estimate any missing values of inorganic carbon content[January]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". janCarbContentESTmeth Z Z056 Method used to estimate any missing values of inorganic carbon content[February]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". febCarbContentESTmeth Z Z057 Method used to estimate any missing values of inorganic carbon content[March]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". marCarbContentESTmeth Z Z058 Method used to estimate any missing values of inorganic carbon content[April]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". aprCarbContentESTmeth Z Z059 Method used to estimate any missing values of inorganic carbon content[May]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". mayCarbContentESTmeth Z Z060 Method used to estimate any missing values of inorganic carbon content[June]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". junCarbContentESTmeth Z Z061 Method used to estimate any missing values of inorganic carbon content[July]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". julCarbContentESTmeth Z Z062 Method used to estimate any missing values of inorganic carbon content[August]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". augCarbContentESTmeth Z Z063 Method used to estimate any missing values of inorganic carbon content[September]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". sepCarbContentESTmeth Z Z064 Method used to estimate any missing values of inorganic carbon content[October]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". octCarbContentESTmeth Z Z065 Method used to estimate any missing values of inorganic carbon content[November]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". novCarbContentESTmeth Z Z066 Method used to estimate any missing values of inorganic carbon content[December]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". decCarbContentESTmeth Z Z067 Is the carbon dioxide content of a grab sample batch a substitute data value?[January]. This data element is required for each month of the Reporting Year. janGrabSampbatch Z Z068 Is the carbon dioxide content of a grab sample batch a substitute data value?[February]. This data element is required for each month of the Reporting Year. febGrabSampbatch Z Z069 Is the carbon dioxide content of a grab sample batch a substitute data value?[March]. This data element is required for each month of the Reporting Year. marGrabSampbatch Z Z070 Is the carbon dioxide content of a grab sample batch a substitute data value?[April]. This data element is required for each month of the Reporting Year. aprGrabSampbatch Z Z071 Is the carbon dioxide content of a grab sample batch a substitute data value?[May]. This data element is required for each month of the Reporting Year. mayGrabSampbatch Z Z072 Is the carbon dioxide content of a grab sample batch a substitute data value?[June]. This data element is required for each month of the Reporting Year. junGrabSampbatch Z Z073 Is the carbon dioxide content of a grab sample batch a substitute data value?[July]. This data element is required for each month of the Reporting Year. julGrabSampbatch Z Z074 Is the carbon dioxide content of a grab sample batch a substitute data value?[August]. This data element is required for each month of the Reporting Year. augGrabSampbatch Z Z075 Is the carbon dioxide content of a grab sample batch a substitute data value?[September]. This data element is required for each month of the Reporting Year. sepGrabSampbatch Z Z076 Is the carbon dioxide content of a grab sample batch a substitute data value?[October]. This data element is required for each month of the Reporting Year. octGrabSampbatch Z Z077 Is the carbon dioxide content of a grab sample batch a substitute data value?[November]. This data element is required for each month of the Reporting Year. novGrabSampbatch Z Z078 Is the carbon dioxide content of a grab sample batch a substitute data value?[December]. This data element is required for each month of the Reporting Year. decGrabSampbatch Z Z079 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[January]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". janGrabSampmeth Z Z080 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[February]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". febGrabSampmeth Z Z081 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[March]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". marGrabSampmeth Z Z082 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[April]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". aprGrabSampmeth Z Z083 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[May]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". mayGrabSampmeth Z Z084 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[June]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". junGrabSampmeth Z Z085 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[July]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". julGrabSampmeth Z Z086 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[August]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". augGrabSampmeth Z Z087 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[September]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". sepGrabSampmeth Z Z088 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[October]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". octGrabSampmeth Z Z089 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[November]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". novGrabSampmeth Z Z090 Method used to determine each carbon dioxide content of a grab sample batch substitute data value[December]. This data element is required for the month of the Reporting Year when \'Is the inorganic carbon content value a substitute data value?\' is "Yes". decGrabSampmeth Z Z099 You have added Subpart Z, but have not yet added a wet-process phosphoric acid line. groupUnit Z Z100 You have added a wet-process phosphoric acid line, but have not yet added an origin of rock. feedstocks Z Z101 Origin of Phosphate Rock. This data element is required. Please enter the required data or click CANCEL. phosphateRockOrigin Z Z102 Origin of Phosphate Rock, Other. This data element is required when Origin of Phosphate is specified as "Other". otherOrigin Z Z103 Annual amount of phosphoric acid produced. This data element is required. phosphoricAcidProduced Z Z104 Annual amount of phosphoric acid produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. phosphoricAcidProduced Z Z106 Annual arithmetic average percent inorganic carbon, or the annual arithmetic average percent carbon dioxide (derived from monthly sampling records) (percent by weight, expressed as a decimal fraction). This data element is required. averagePercentInrganicCarbon Z Z107 Annual arithmetic average percent inorganic carbon, or the annual arithmetic average percent carbon dioxide (derived from monthly sampling records) (percent by weight, expressed as a decimal fraction). You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. averagePercentInrganicCarbon Z Z109 Annual amount of rock consumed. This data element is required. rockConsumed Z Z110 Annual amount of rock consumed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. rockConsumed Z Z112 Origin of Phosphate Rock, Other. The value you have entered for this data element already exists for this unit. You must correct the current value before continuing. otherOrigin Z Z115 The Annual amount of Phosphoric Acid Produced [{1} (tons)] for the process line [{2}] is greater than or equal to its reported Annual Phosphoric Acid Production Capacity [{3} (tons)]. Please address this critical error. Then you can return here to perform another final review and submit your report. data['unitProductionCapacity'] Z Z116 The value reported for Subpart Z Facility Total Annual Phosphoric Acid Production Capacity [{1} (tons)] appears to be inconsistent with the sum of all of the Annual Phosphoric Acid Production Capacity values entered for each of the process line(s) at your facility [{2} (tons)]. Please address this critical error. Then you can return here to perform another final review and submit your report. data['facilityProductionCapacity']