Overview
This help page provides guidance for working with the supplemental Subpart K Calculation Spreadsheet. The guidance provides step-by-step instructions for the following tasks:
- Using Subpart K Calculation Spreadsheets#Downloading the Calculation Spreadsheet
- Using Subpart K Calculation Spreadsheets#General Information on Using a Calculation Spreadsheet
- Using Subpart K Calculation Spreadsheets#Using the Equation K-1, K-3 Calculation Spreadsheet
Downloading the Calculation Spreadsheet
The calculation spreadsheet for Subpart K may be downloaded by clicking the link in the first column of the table below. Users may also jump to instructions for each calculation spreadsheet by clicking the link in the second column.
Calculation Spreadsheet | Instructions |
---|---|
General Information on Using a Calculation Spreadsheet
The guidance provided in this section applies to calculation spreadsheets for all subparts. Additional guidance specific to Subpart K is provided in the following section.
Using the Equation K-1, K-3 Calculation Spreadsheet
Use the Equation K-1, K-3 Calculation Spreadsheet to calculate the annual CO2 and CH4 process emissions from an electric arc furnace. A separate spreadsheet is to be used for each furnace. Users should not use aggregated data from multiple furnaces in a single calculation spreadsheet. The Equation K-1, K-3 Calculation Spreadsheet performs the calculations using Equations K-1 and K-3, provided below (see calculation spreadsheet for definitions of variables).
(Equation K-1) | |
---|---|
(Equation K-3) |
Begin by entering the facility name, your name, the furnace name or identifier, the reporting period and any additional comments in the green input cells of the General Information table located immediately below the equations in the calculation spreadsheet. This is for your records.
Next, enter the requested information in the green input cells of the input data tables.
The calculation spreadsheet will then calculate the annual CO2 and CH4 process emissions from this electric arc furnace. The calculated values will be displayed in red-bordered cells in the K-1, K-3 Results tables at the bottom of the spreadsheet. This value should be entered in e-GGRT for this furnace.