This page provides step-by-step instructions on how to enter and edit Subpart G Ammonia Manufacturing process unit information for units that are monitored by a Continuous Emissions Monitoring System (CEMS).
Step 1: Add a unit
To add a unit that is monitored by a CEMS, find the UNIT SUMMARY (Units monitored by CEMS) table on the Subpart Overview page and click the link titled "ADD a Unit Monitored by CEMS"
To edit a unit, click the edit icon or the Name/ID link located in the first column of the UNIT SUMMARY (Units monitored by CEMS) table
To delete a unit, click the delete icon located in the last column of the UNIT SUMMARY (Units monitored by CEMS) table
Click this link to expand
Step 2: Indicate CEMS utilization for a unit
For each process unit, confirm whether or not the process unit utilizes CEMS
Note that when adding a new unit you are prompted to answer the CEMS question immediately (the answer to this question will default to “No” for units added using the “ADD a Unit” link and will default to “Yes” for units added using the “ADD a Unit Monitored by CEMS” link)
The CEMS response may be changed here and the unit information will be relocated to the appropriate table on the Subpart Overview page
When finished, click SAVE
Click this link to expand
Step 3: Enter required information for a unit
For each process unit monitored by a CEMS, report the following required information:
- A unique name or identifier for the unit, plus optional description for this facility (see also About Unique Unit Names)
- The feedstock type used by the unit (gaseous, liquid, or solid)
When finished, click SAVE
Click this link to expand
Step 4: Enter supplemental unit information
To select a unit for which to enter supplemental unit information, find the unit in the UNIT SUMMARY (Units Monitored by CEMS) table and click OPEN
Click this link to expand
For each unit monitored by CEMS, enter the following required supplemental unit information:
- The quantity of feedstock consumed by the unit during the reporting year
- The method used for determining the quantity of feedstock consumed
When finished, click SAVE.
Step 5: Repeat Steps 1-4
Repeat Steps 1-3 until all process units monitored by a CEMS have been added for your facility
See Also
Using e-GGRT to Prepare Your Subpart G Report for RY2014 and Later Years
- Subpart G Summary Information for this Facility for RY2014 and Later Years
- Subpart G Process Unit Information for Units NOT Monitored by CEMS for RY2014 and Later Years
- Subpart G Process Unit Information for Units Monitored by CEMS for RY2014 and Later Years
- Subpart G Emissions Information for Process Units NOT Monitored by CEMS for RY2014 and Later Years
- Subpart G Emissions Information for Process Units Monitored by CEMS for RY2014 and Later Years
- Subpart G Entering Equation Inputs Using IVT