This topic provides a step-by-step description of how to enter Subpart T emissions information about this facility.
Use this page to enter the GHG data required by Subpart T. Please enter the information shown for this cover or carrier gas.
Step 1: Add a cover or carrier gas
Click the link named "ADD a Cover or Carrier Gas" from the subpart T Overview screen under the GHG COVER/CARRIER GASES table.
Click image to expand
Step 2: Enter cover gas information
Enter each cover gas used at the facility by selecting from the "GHG Cover or Carrier Gas" drop down menu.
Click image to expand
After selecting the cover gas, enter the annual usage rate for each cover gas identified, an explanation for any change (greater than 30%) in the facility’s usage rate (facility-wide) of each of the cover gases identified, and a description of any new melt protection technologies adopted that would account for reduced or increased GHG emissions.
Click image to expand
Click "SAVE". e-GGRT will return to the subpart T Overview screen.
Click image to expand
Step 3: Enter carrier gas information
If your facility uses a GHG carrier gas, select "Other GHG Cover Gas" from the drop down menu on the "Add/Edit Cover or Carrier Gas" page.
Enter the gas's name and CAS number. Leave the "Chemical Formula" field blank.
Enter a "0" (zero) in the "Annual Cover Gas Usage Rate" field.
Click image to expand
Click "SAVE". e-GGRT will return to the subpart T Overview screen.
Click image to expand
Step 4: Enter emissions information
Click "OPEN" to enter the total annual facility emissions resulting from the GHG's use as a cover or carrier gas:
- Enter the total annual emissions
- The method used to calculate the emissions.
If you select one of the Method T-2 options, complete the fields in the MISSING DATA INFORMATION section.
Click image to expand
Click "SAVE". e-GGRT will return to the subpart T Overview screen.
Click image to expand
