FAQ > Rule Subparts > Subpart W. Petroleum and Natural Gas Systems > Subpart W - General > Q613. Is there any way we can get unlocked subpart W screening spreadsheets from the applicability tool?
Skip to end of metadata
Go to start of metadata

Q613. Is there any way we can get unlocked subpart W screening spreadsheets from the applicability tool?

 

A613. No. EPA’s intention in posting subpart W calculation utilities is to provide facilities with a simple tool for estimating emissions when determining applicability. Additionally, the tools include a guidance and source tab to document how emission estimates were calculated. The utilities are only a guide to help facilities determine their subpart W applicability. If you suspect a facility may exceed the annual 25,000 metric ton CO2e threshold, you should refer to the calculation methodologies in 98.233 to determine emissions.

 

Unknown macro: {show-to} Footer / References Bar which is Visible to the public

Updated on January 19, 2012

Unknown macro: {show-to}

Source: EPA, Frequently Asked Questions, Petroleum and Natural Gas Systems, July 2011, http://www.epa.gov/ghgreporting/documents/pdf/2011/documents/Subpart-W-additional-faq.pdf.

Approval / Publishing History: Version 1 Updated and approved by M. Eaddy 2/5/12

Expiration : none

Relevant Subpart: W

History Panel For Internal Use - Not Visible to the Public

 

 

This web site is maintained by a contractor to the U.S. Environmental Protection Agency (RY2017.R.01)