Q77. For a unit that has an O2 monitor and doesn’t meet the conditions required to use Tier 4, but elects to use Tier 4, what are the monitoring requirements?
A77. If a facility elects to use Tier 4, then all of the Tier 4 requirements must be met. In this case, a stack flow monitor must be installed and certified, and the O2 monitor may be used in lieu of installing and certifying a CO2 monitor, provided that: (1) only fuels listed in Table 1 in section 3.3.5 of Part 75, Appendix F are combusted in the unit; and (2) the effluent stream does not include any CO2 emissions from non-combustion processes or emission control systems. (See §98.33(a)(4)(iv)). However, the relative accuracy test audit (RATA) of the O2 monitor must be conducted on a %CO2 basis comparing the calculated CO2 concentrations to the concentrations measured by the CO2 reference method. (See §98.34(c)(2).)
| Show If |
|---|
|
| Footer / References Bar which is Visible to the public |
| Panel |
|---|
Updated on | Page info |
|---|
| infoType | modified-Modified date |
|---|
| type | modified-dateFlat |
|---|
| dateformat | dd/MM/YY HH:mm |
|---|
|
|
| Wiki Markup |
|---|
{show-to:group=confluence-Users}{_}Footer / References Bar which is Visible to the public{_}{show-to} |
...
| Show If |
|---|
|
| Info |
|---|
Source: This question and answer was derived from a Legacy FAQ, revised by M. Hannan, |
|
...
...
...
...
...
...
...
...
...
...
...
...
...
...
History Panel For Internal Use - Not Visible to the Public |
