Q667. How do I determine applicability for Subpart W facilities with stationary combustion sources?
A667. Subpart W facilities with stationary combustion sources are subject to reporting if they meet the requirement of 98.2.
A facility that only has Subpart C sources is required to report if the conditions specified in 98.2(a)(3)(i)-(iii) are met. 98.2(a)(3)(ii) specifies that a facility is only required to report if aggregate maximum rated heat input capacity is 30 mmBtu/hr or greater. Where a facility is subject to both Subpart C and Subpart W the applicability requirements are specified in 98.2(a)(2) instead of 98.2(a)(3).
...
Subpart W facilities that are not onshore petroleum and natural gas production or natural gas distribution facilities, report their stationary combustion emissions under Subpart C and determine applicability based on the source categories listed in §98.2.
Click image to expand
...
|
Footer / References Bar which is Visible to the public |
Panel |
---|
Updated on Page info |
---|
infoType | modified-Modified datemodified-date |
---|
type | Flat |
---|
dateformat | dd/MM/YY HH:mm |
---|
| |
Wiki Markup |
---|
{show-to:group=confluence-Users}{_}Footer / References Bar which is Visible to the public{_}}{show-to} |
Show If |
---|
|
Info |
---|
Source: Drafted new by July 25 2012. Approval / Publishing History: Reviewed and Approved by D. Jacobson and M. Rohwer on |
|
Wiki Markup |
---|
{show-to:group=confluence-Users}
{info}
Source: Drafted new by July 25 2012
Approval / Publishing History: Reviewed and Approved by D. Jacobson and M Rohwer on
Expiration: January 2013
Relevant Subpart/Component: Subpart W General
{info}{_}History Panel For Internal Use - Not Visible to the Public{_}{show-to}. Expiration: Subpart W General. Relevant Subparts: W |
History Panel For Internal Use - Not Visible to the Public |