Q77. For a unit that has an O2 monitor and doesn’t meet the conditions required to use Tier 4, but elects to use Tier 4, what are the monitoring requirements?

A77.  If a facility elects to use Tier 4, then all of the Tier 4 requirements must be met. In this case, a stack flow monitor must be installed and certified, and the O2 monitor may be used in lieu of installing and certifying a CO2 monitor, provided that: (1) only fuels listed in Table 1 in section 3.3.5 of Part 75, Appendix F are combusted in the unit; and (2) the effluent stream does not include any CO2 emissions from non-combustion processes or emission control systems. (See §98.33(a)(4)(iv)). However, the relative accuracy test audit (RATA) of the O2 monitor must be conducted on a %CO2 basis comparing the calculated CO2 concentrations to the concentrations measured by the CO2 reference method. (See §98.34(c)(2).)

{show-to:group=confluence-Users}{_}Footer / References Bar which is Visible to the public{_}{show-to}

{show-to:group=confluence-Users}
{info}
Source: This question and answer was derived from a Legacy FAQ, revised by M. Hannan, 1/23/2013

Approval / Publishing History: Version 2, approved by L. Grogan-McCulloch, 2/13/2013

Expiration: none

Relevant Subparts:  Subpart C
{info}{_}History Panel For Internal Use - Not Visible to the Public{_}{show-to}