Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| VALANG_ID | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| F701 | F | Data Completeness | You have added Subpart F, but have not specified the type of smelter technology used. |
| F702 | F | Screen Error | Annual CF4 (perfluoromethane) mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F703 | F | Data Completeness | Annual CF4 (perfluoromethane) mass emissions. This data element is required. |
| F705 | F | Screen Error | Annual C2F6 (perfluoroethane) mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F706 | F | Data Completeness | Annual C2F6 (perfluoroethane) mass emissions. This data element is required. |
| F708 | F | Screen Error | Annual CO2 emissions from anode paste consumption and/or anode consumption and baking. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F709 | F | Data Completeness | Annual CO2 emissions from anode paste consumption and/or anode consumption and baking. This data element is required. |
| F714 | F | Data Completeness | Method used to measure the frequency and duration of anode effects (or overvoltage). This data element is required. |
| F715 | F | Data Completeness | Number of months in the reporting year that missing data procedures were followed to measure the anode effect overvoltage emission factor (i.e., potline overvoltage and/or current efficiencies). Enter 0 (zero) if missing data procedures were not used. This data element is required. |
| F716 | F | Screen Error | Number of months in the reporting year that missing data procedures were followed to measure the anode effect overvoltage emission factor (i.e., potline overvoltage and/or current efficiencies). This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. |
| F717 | F | Data Completeness | Number of months in the reporting year that missing data procedures were followed to measure the anode effect minutes per cell day (i.e., anode effect frequency and/or anode effect duration). Enter 0 (zero) if missing data procedures were not used. This data element is required. |
| F718 | F | Screen Error | Number of months in the reporting year that missing data procedures were followed to measure the anode effect minutes per cell day (i.e., anode effect frequency and/or anode effect duration). This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. |
| F719 | F | Data Completeness | Number of months in the reporting year that missing data procedures were followed to measure the anode consumption. Enter 0 (zero) if missing data procedures were not used. This data element is required. |
| F720 | F | Screen Error | Number of months in the reporting year that missing data procedures were followed to measure the anode consumption. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. |
| F721 | F | Data Completeness | Number of months in the reporting year that missing data procedures were followed to measure the anode paste consumption. Enter 0 (zero) if missing data procedures were not used. This data element is required. |
| F722 | F | Screen Error | Number of months in the reporting year that missing data procedures were followed to measure the anode paste consumption. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. |
| F723 | F | Data Completeness | You have selected Subpart F for reporting, but you have not yet added a smelter or potline. |
| F725 | F | Screen Error | Method used for estimating PFC emissions. This data element is required. Please enter the required data or click CANCEL. |
| F726 | F | Data Completeness | Annual Anode effect minutes per cell-day. This data element is required. |
| F727 | F | Screen Error | Annual Anode effect minutes per cell-day. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F729 | F | Data Completeness | Annual anode effect frequency. This data element is required. |
| F730 | F | Screen Error | Enter Own Result for Annual CO2 emissions from anode paste consumption. This data element is required if you select Enter/Report Alternate Result. |
| F731 | F | Screen Error | Enter Own Result for Annual CO2 emissions from anode consumption and baking. This data element is required if you select Enter/Report Alternate Result. |
| F732 | F | Screen Error | Enter Own Result for Annual CF4 (perfluoromethane) mass emissions. This data element is required if you select Enter/Report Alternate Result. |
| F733 | F | Screen Error | Enter Own Result for Annual C2F6 (perfluoroethane) mass emissions. This data element is required if you select Enter/Report Alternate Result. |
| F735 | F | Data Completeness | Annual anode effect overvoltage. This data element is required. |
| F736 | F | Screen Error | Annual anode effect overvoltage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F737 | F | Data Completeness | Annual potline overvoltage. This data element is required. |
| F738 | F | Screen Error | Annual potline overvoltage. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F739 | F | Data Completeness | Current efficiency. This data element is required. |
| F740 | F | Screen Error | Current efficiency. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F741 | F | Data Completeness | Smelter-specific slope coefficient (or overvoltage emission factor). This data element is required. |
| F742 | F | Screen Error | Smelter-specific slope coefficient (or overvoltage emission factor). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F744 | F | Screen Error | Annual anode effect frequency. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F746 | F | Data Completeness | Annual anode effect duration. This data element is required. |
| F747 | F | Screen Error | Annual anode effect duration. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F750 | F | Screen Error | Smelter technology. You must select a value from the listed options before continuing. |
| F751 | F | Screen Error | Method used for estimating PFC emissions. You must select a value from the listed options before continuing. |
| F780 | F | Data Completeness | The last date when the smelter-specific slope coefficients were measured. This data element is required. |
| F783 | F | Data Completeness | Annual Anode Consumption. This data element is required. |
| F784 | F | Screen Error | Annual Anode Consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| F785 | F | Data Completeness | Annual paste consumption. This data element is required. |
| F786 | F | Screen Error | Annual paste consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F001 | F | Data Completeness | You have not yet added any equation inputs data for annual CO2 emissions from prebaked anode consumption. Please use the Inputs Verifier Tool to enter equation inputs for prebake cells and calculate a result for this Aluminum Production facility. |
| IVT-F002 | F | Screen Error | Net annual prebaked anode consumption. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F003 | F | Screen Error | Net annual prebaked anode consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F006 | F | Screen Error | Annual metal production of aluminum. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F007 | F | Screen Error | Annual metal production of aluminum. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F010 | F | Screen Error | Sulfur content in baked anode. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F011 | F | Screen Error | Sulfur content in baked anode. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F014 | F | Screen Error | Ash content in baked anode. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F015 | F | Screen Error | Ash content in baked anode. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F018 | F | Data Completeness | You have not yet added any equation inputs data for annual CO2 emissions from paste consumption. Please use the Inputs Verifier Tool to enter equation inputs for paste consumption and calculate a result for this Aluminum Production facility. |
| IVT-F019 | F | Screen Error | Annual paste consumption. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F020 | F | Screen Error | Annual paste consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F023 | F | Screen Error | Annual metal production of aluminum. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F024 | F | Screen Error | Annual metal production of aluminum. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F027 | F | Screen Error | Annual emissions of cyclohexane soluble matter. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F030 | F | Screen Error | Binder content of paste. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F031 | F | Screen Error | Binder content of paste. You must enter a value that is greater than zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F034 | F | Screen Error | Sulfur content of pitch. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F035 | F | Screen Error | Sulfur content of pitch. You must enter a value that is greater than zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F038 | F | Screen Error | Ash content of pitch. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F039 | F | Screen Error | Ash content of pitch. You must enter a value that is greater than zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F042 | F | Screen Error | Hydrogen content of pitch. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F043 | F | Screen Error | Hydrogen content of pitch. You must enter a value that is greater than zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F046 | F | Screen Error | Sulfur content in calcined coke. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F047 | F | Screen Error | Sulfur content in calcined coke. You must enter a value that is greater than zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F050 | F | Screen Error | Ash content in calcined coke. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F051 | F | Screen Error | Ash content in calcined coke. You must enter a value that is greater than zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F054 | F | Screen Error | Carbon in skimmed dust from Søderberg cells. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F055 | F | Screen Error | Carbon in skimmed dust from Søderberg cells. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F058 | F | Data Completeness | You have not yet added any equation inputs data for annual CO2 emissions from pitch volatiles combustion. Please use the Inputs Verifier Tool to enter equation inputs for prebake cells and calculate a result for this Aluminum Production facility. |
| IVT-F059 | F | Screen Error | Initial weight of green anodes. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F060 | F | Screen Error | Initial weight of green anodes. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F063 | F | Screen Error | Annual hydrogen content in green anodes. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F064 | F | Screen Error | Annual hydrogen content in green anodes. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F067 | F | Screen Error | Annual baked anode production. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F068 | F | Screen Error | Annual baked anode production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F071 | F | Screen Error | Annual waste tar collected. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F072 | F | Screen Error | Annual waste tar collected. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F075 | F | Data Completeness | You have not yet added any equation inputs data for annual CO2 emissions from bake furnace packing material. Please use the Inputs Verifier Tool to enter equation inputs for prebake cells and calculate a result for this Aluminum Production facility. |
| IVT-F076 | F | Screen Error | Annual packing coke consumption. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F077 | F | Screen Error | Annual packing coke consumption. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F080 | F | Screen Error | Annual baked anode production. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F081 | F | Screen Error | Annual baked anode production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F084 | F | Screen Error | Sulfur content in packing coke. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F085 | F | Screen Error | Sulfur content in packing coke. You must enter a value that is greater than zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F088 | F | Screen Error | Ash content in packing coke. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F089 | F | Screen Error | Ash content in packing coke. You must enter a value that is greater than zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-F093 | F | Data Quality | Annual CO2 emissions from anode paste consumption. The calculated value should be greater than or equal to zero. |
| IVT-F095 | F | Data Quality | Annual CO2 emissions from prebaked anode consumption. The calculated value should be greater than or equal to zero. |
| IVT-F096 | F | Data Quality | Annual CO2 emissions from pitch volatiles combustion. The calculated value should be greater than or equal to zero. |
| IVT-F097 | F | Data Quality | Annual CO2 emissions from bake furnace packing material. The calculated value should be greater than or equal to zero. |
| IVT-F098 | F | Data Completeness | You have not yet added any equation inputs data for Monthly CF4 emissions from aluminum production for this smelter or potline. Please use the Inputs Verifier Tool to enter equation inputs for each month and calculate a result for this smelter or potline. |
| IVT-F099 | F | Screen Error | Equation used to calculate CF4 emissions. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F100 | F | Screen Error | Slope coefficient for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F101 | F | Screen Error | Slope coefficient for {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F104 | F | Screen Error | Anode effect minutes per cell-day for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F105 | F | Screen Error | Anode effect minutes per cell-day for {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F108 | F | Screen Error | Anode effect frequency for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F109 | F | Screen Error | Anode effect frequency for {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F112 | F | Screen Error | Anode effect duration for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F113 | F | Screen Error | Anode effect duration for {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F116 | F | Screen Error | Metal production of aluminum for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F117 | F | Screen Error | Metal production of aluminum for {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F120 | F | Screen Error | Overvoltage emission factor for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F121 | F | Screen Error | Overvoltage emission factor for {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F124 | F | Screen Error | Metal production of aluminum for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F125 | F | Screen Error | Metal production of aluminum for {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-F128 | F | Data Completeness | You have not yet added any equation inputs data for Monthly C2F6 emissions from aluminum production for this smelter or potline. Please use the Inputs Verifier Tool to enter equation inputs for each month and calculate a result for this smelter or potline. |
| IVT-F129 | F | Screen Error | Weight fraction of C2F6/CF4 for {1}. This data element is required. Please enter the required data or click CANCEL. |
| IVT-F130 | F | Screen Error | Weight fraction of C2F6/CF4 for {1}. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-F135 | F | Screen Error | Annual emissions of cyclohexane soluble matter. You must enter a value that is greater than zero. You must correct the current value before continuing. |
| IVT-F136 | F | Screen Error | The sum of the reported weight percent. You must enter a total value that is not greater than 100. You must correct the current value before continuing. |
| IVT-F137 | F | Screen Error | The sum of the reported weight percent. You must enter a total value that is not greater than 100. You must correct the current value before continuing. |
| IVT-F138 | F | Screen Error | The sum of the reported weight percent. You must enter a total value that is not greater than 100. You must correct the current value before continuing. |
| ALL0001 | P | Data Quality | CAS Registry Number. You have reported {1} as the GHGasCASRegistryNumber for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. |
| ALL0002 | P | Data Quality | Linear Chemical Formula. You have reported {1} as the GHGasLinearChemicalFormula for the GHGasName {2}. This data element should not be reported for carbon dioxide, methane, or nitrous oxide. |
| CEMSML-1 | P | Data Completeness | Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). |
| CEMSML-2 | P | Data Completeness | CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. |
| CML-001 | P | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-002 | P | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-007 | P | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-007X | P | Screen Error | Total carbon dioxide (CO2) emissions measured by the CEMS (or applicable Part 75 methodology). This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-012 | P | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. |
| CML-013 | P | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-014 | P | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-016 | P | Screen Error | Carbon dioxide emissions in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-018 | P | Screen Error | Carbon dioxide emissions in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-020 | P | Screen Error | Carbon dioxide emissions in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-022 | P | Screen Error | Carbon dioxide emissions in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-027a | P | Data Completeness | Fraction of nitrous oxide emissions from CML. This data element is required. |
| CML-034 | P | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-035 | P | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-036 | P | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-037 | P | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-038 | P | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-039 | P | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-040 | P | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-041 | P | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-043 | P | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. |
| CML-046 | P | Data Completeness | CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. |
| CML-047a | P | Data Completeness | Fraction of methane emissions from CML. This data element is required. |
| CML-051 | P | Data Completeness | Total Non-biogenic carbon dioxide emissions. This data element is required. |
| CML-052 | P | Data Completeness | Total Biogenic carbon dioxide emissions. This data element is required. |
| CML-053 | P | Data Completeness | Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-054 | P | Data Completeness | Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-055 | P | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-056 | P | Screen Error | Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-057 | P | Data Completeness | Total number of source operating hours in the reporting year. This data element is required. |
| CML-058 | P | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. |
| CML-059 | P | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is less than the End Date. |
| CML-060 | P | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-061 | P | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-062 | P | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-063 | P | Data Completeness | Carbon dioxide emissions measured in Quarter 1. This data element is required. |
| CML-064 | P | Screen Error | Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-065 | P | Data Completeness | Carbon dioxide emissions measured in Quarter 2. This data element is required. |
| CML-066 | P | Screen Error | Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-067 | P | Data Completeness | Carbon dioxide emissions measured in Quarter 3. This data element is required. |
| CML-068 | P | Screen Error | Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-069 | P | Data Completeness | Carbon dioxide emissions measured in Quarter 4. This data element is required. |
| CML-070 | P | Screen Error | Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-071 | P | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-072 | P | Data Completeness | Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-073 | P | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-074 | P | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-075 | P | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-076 | P | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-077 | P | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-078 | P | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-082 | P | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-083 | P | Screen Error | Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. |
| CML-086 | P | Screen Error | The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-087 | P | Screen Error | The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-088 | P | Screen Error | The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| CML-089 | P | Screen Error | The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| IVT-P001 | P | Screen Error | Indicate whether the monthly consumption of fuel or feedstock is measured as mass or volume. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P002 | P | Screen Error | Mass of the gaseous fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P003 | P | Screen Error | Mass of the gaseous fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-P004 | P | Screen Error | Volume of the gaseous fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P005 | P | Screen Error | Volume of the gaseous fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-P006 | P | Screen Error | Average carbon content of the gaseous fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P007 | P | Screen Error | Average carbon content of the gaseous fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-P010 | P | Screen Error | Average molecular weight of the gaseous fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P011 | P | Screen Error | Average molecular weight of the gaseous fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-P014 | P | Screen Error | Indicate whether the monthly consumption of fuel or feedstock is measured as mass or volume. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P015 | P | Screen Error | Mass of the liquid fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P016 | P | Screen Error | Mass of the liquid fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-P017 | P | Screen Error | Volume of the liquid fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P018 | P | Screen Error | Volume of the liquid fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-P019 | P | Screen Error | Average carbon content of the liquid fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P020 | P | Screen Error | Average carbon content of the liquid fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-P023 | P | Screen Error | Mass of the solid fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P024 | P | Screen Error | Mass of the solid fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-P025 | P | Screen Error | Average carbon content of the solid fuel or feedstock, for month(s) [{1}]. This data element is required. Please enter the required data or click CANCEL. |
| IVT-P026 | P | Screen Error | Average carbon content of the solid fuel or feedstock, for month(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-P030 | P | Data Quality | Annual process CO2 emissions from hydrogen production unit. The calculated value is less than zero. |
| IVT-P031 | P | Data Completeness | You have not yet added any equation inputs data for this fuel or feedstock. Please use the Inputs Verifier Tool to enter equation inputs for each fuel and/or feedstock and calculate a result for this unit. |
| IVT-P032 | P | Data Completeness | You have not yet added any equation inputs data for this fuel or feedstock. Please use the Inputs Verifier Tool to enter equation inputs for each fuel and/or feedstock and calculate a result for this unit. |
| IVT-P033 | P | Data Completeness | You have not yet added any equation inputs data for this fuel or feedstock. Please use the Inputs Verifier Tool to enter equation inputs for each fuel and/or feedstock and calculate a result for this unit. |
| IVT-P036 | P | Screen Error | Unit "{1}" was found in the inputs data but not in the GHG report data. |
| IVT-P037 | P | Screen Error | Unit "{1}" was found in the GHG report data but not in the inputs data. |
| IVT-P038 | P | Screen Error | Feedstock "{2}" was found for unit "{1}" in the inputs data but not in the GHG report data. |
| IVT-P039 | P | Screen Error | Feedstock "{2}" was found for unit "{1}" in the inputs data but not in the GHG report data. |
| IVT-P040 | P | Screen Error | Feedstock "{2}" was found for unit "{1}" in the inputs data but not in the GHG report data. |
| IVT-P041 | P | Screen Error | Feedstock "{2}" was found for unit "{1}" in the GHG report data but not in the inputs data. |
| P001 | P | Screen Error | Please make a selection or click CANCEL. |
| P002 | P | Data Completeness | Annual quantity of carbon other than CO2 collected and transferred off site in eiher gas, liquid, or solid forms, excluding methanol. This data element is required. |
| P003 | P | Screen Error | Annual quantity of carbon other than CO2 collected and transferred off site in eiher gas, liquid, or solid forms, excluding methanol. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| P005 | P | Screen Error | Feedstock Name. This data element is required. Please enter the required data or click CANCEL. |
| P006 | P | Screen Error | Feedstock Type. This data element is required. |
| P007 | P | Data Completeness | Annual carbon dioxide emissions from hydrogen production. This data element is required. If no carbon dioxide was emitted during the reporting year, please enter 0. |
| P008 | P | Screen Error | Annual carbon dioxide emissions from hydrogen production. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| P011 | P | Data Completeness | Hydrogen Produced. This data element is required. If no hydrogen was produced in the reporting year, please enter 0. |
| P012 | P | Screen Error | Hydrogen Produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| P014 | P | Data Completeness | Annual quantity of ammonia intentionally produced as a desired product, if applicable. This data element is required. If no ammonia was intentionally produced as a desired product in the reporting year, please enter 0. |
| P015 | P | Screen Error | Annual quantity of ammonia intentionally produced as a desired product, if applicable. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| P018 | P | Data Completeness | You have not yet added a fuel or feedstock for this unit. |
| P019 | P | Screen Error | Annual quantity of ammonia intentionally produced as a desired product, if applicable. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| P020 | P | Data Completeness | Hydrogen Produced. This data element is required. If no hydrogen was produced in the reporting year, please enter 0. |
| P022 | P | Screen Error | Hydrogen Produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| P023 | P | Data Completeness | Annual quantity of ammonia intentionally produced as a desired product, if applicable. This data element is required. If no ammonia was produced in the reporting year, please enter 0. |
| P025 | P | Data Completeness | Annual quantity of methanol intentionally produced as a desired product, if applicable. This data element is required. You may enter a value of zero if you did not produce methanol from this unit during the reporting year. |
| P026 | P | Data Completeness | Annual quantity of methanol intentionally produced as a desired product, if applicable. This data element is required. You may enter a value of zero if you did not produce methanol from this unit during the reporting year. |
| P028 | P | Data Completeness | Annual quantity of fuel or feedstock consumed. This data element is required. |
| P029 | P | Screen Error | Annual quantity of fuel or feedstock consumed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| P031 | P | Screen Error | Enter Own Result for Annual process CO2 emissions from hydrogen production unit. This data element is required if you select Enter/Report Alternate Result. |
| P032 | P | Screen Error | The fuel or feedstock "Name" you are attempting to add is invalid because it already exists for this unit. Please enter a unique name, or click CANCEL. |
| P033 | P | Screen Error | Annual quantity of methanol intentionally produced as a desired product, if applicable. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| P034-1 | P | Data Quality | Annual quantity of methanol intentionally produced as a desired product, if applicable (for units monitored by CEMS and not monitored by CEMS) should not be included in annual reports prior to Reporting Year 2014. This data element (CEMSAnnualMethanolProduced or AnnualMethanolProduced) is only required to be reported in Reporting Year 2014 and following years. |
| P034-2 | P | Data Quality | Annual quantity of methanol intentionally produced as a desired product, if applicable (for units monitored by CEMS and not monitored by CEMS) should not be included in annual reports prior to Reporting Year 2014. This data element (CEMSAnnualMethanolProduced or AnnualMethanolProduced) is only required to be reported in Reporting Year 2014 and following years. |
| P035 | P | Data Quality | Annual quantity of Fuel Feed Stock Consumed (for units not monitored by CEMS) should not be included in annual reports prior to Reporting Year 2014. This data element (AnnualFuelFeedstockConsumed) is only required to be reported in Reporting Year 2014 and following years. |
| P200 | P | Data Completeness | Annual Quantity Of Hydrogen. This data element is required. |
| P201 | P | Screen Error | Annual Quantity Of Hydrogen. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| P203 | P | Data Completeness | Annual Quantity Of Ammonia. This data element is required. |
| P204 | P | Screen Error | Annual Quantity Of Ammonia. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| P206 | P | Data Completeness | You have selected Subpart P for reporting, but you have not yet added a unit. |
| RR001 | RR | Screen Error | Name of Project, This data element is required. |
| RR004 | RR | Screen Error | CO2 injection (for R&D) End Date cannot be before Start Date. You must correct the current values before continuing. |
| RR011 | RR | Screen Error | Underground Injection Control permit End Date cannot be before Start Date. You must correct the current values before continuing. |
| RR012 | RR | Screen Error | Name of Project, This data element is required. |
| RR015 | RR | Screen Error | The MRV plan submittal date cannot be extended by more than 180 days. Please enter a number of days fewer than 180 days maximum. |
| RR016 | RR | Screen Error | The MRV plan submittal due date extended by. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR017 | RR | Screen Error | Select a file to upload, This data element is required. |
| RR018 | RR | Screen Error | File size is greater than the maximum of 30 MB. |
| RRRPT004 | RR | Screen Error | File size is greater than the maximum of 2 MB. |
| RR0002 | RR (RPT) | Screen Error | CO2 Injection. This data element is required. |
| RR0003 | RR (RPT) | Data Completeness | Mass of CO2 emitted annually from equipment leaks and vented emissions of CO2 from equipment located on the surface between the production wellhead and the flow meter used to measure production quantity. This data element is required. |
| RR0004 | RR (RPT) | Data Completeness | Sources of CO2 Received. This data element is required. |
| RR0005 | RR (RPT) | Screen Error | Equation used to calculate annual mass of CO2 sequestered. This data element is required. |
| RR0006 | RR (RPT) | Data Completeness | Mass of CO2 emitted annually from equipment leaks and vented emissions of CO2 from equipment located on the surface between the flow meter used to measure injection quantity and the injection wellhead. This data element is required. |
| RR0007 | RR (RPT) | Data Completeness | Mass of CO2 emitted annually from equipment leaks and vented emissions of CO2 from equipment located on the surface between the production wellhead and the flow meter used to measure production quantity. This data element is required. |
| RR0008 | RR (RPT) | Data Completeness | Sources of CO2 Received. This data element is required. |
| RR0009 | RR (RPT) | Data Completeness | Does the facility have an approved MRV plan? This data element is required. |
| RR0010 | RR (RPT) | Data Completeness | EPA approval date of most recently approved MRV plan. This data element is required. |
| RR0011 | RR (RPT) | Data Completeness | MRV Plan approval number that was issued by EPA. This data element is required. |
| RR0012 | RR (RPT) | Screen Error | Measurement Type. This data element is required. |
| RR0013 | RR (RPT) | Screen Error | CO2 Injection. This data element is required. |
| RR0014 | RR (RPT) | Screen Error | Measurement Type. This data element is required. |
| RR0015 | RR (RPT) | Data Completeness | Location of flow meter. This data element is required. |
| RR0016 | RR (RPT) | Screen Error | Measurement Type. This data element is required. |
| RR0017 | RR (RPT) | Data Completeness | CO2 emissions. This data element is required. |
| RR0073 | RR (RPT) | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q1. This data element is required. |
| RR0074 | RR (RPT) | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0076 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q1. This data element is required. |
| RR0077 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0078 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q1 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. |
| RR0079 | RR (RPT) | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q2. This data element is required. |
| RR0080 | RR (RPT) | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0082 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q2. This data element is required. |
| RR0083 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0084 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q2 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. |
| RR0085 | RR (RPT) | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q3. This data element is required. |
| RR0086 | RR (RPT) | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0088 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q3. This data element is required. |
| RR0089 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0090 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q3 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. |
| RR0091 | RR (RPT) | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q4. This data element is required. |
| RR0092 | RR (RPT) | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0094 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q4. This data element is required. |
| RR0095 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0096 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q4 to calculate the volume of contents in containers flow through the receiving flow meter. This data element is required. |
| RR0097 | RR (RPT) | Data Completeness | Mass of contents in the container in Q1. This data element is required. |
| RR0098 | RR (RPT) | Screen Error | Mass of contents in the container in Q1. This data element is required. |
| RR0100 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q1. This data element is required. |
| RR0101 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0102 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q1 to calculate the mass of contents in the container. This data element is required. |
| RR0103 | RR (RPT) | Data Completeness | Mass of contents in the container in Q2. This data element is required. |
| RR0104 | RR (RPT) | Screen Error | Mass of contents in the container in Q2. This data element is required. |
| RR0106 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q2. This data element is required. |
| RR0107 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0108 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q2 to calculate the mass of contents in the container. This data element is required. |
| RR0109 | RR (RPT) | Data Completeness | Mass of contents in the container in Q3. This data element is required. |
| RR0110 | RR (RPT) | Screen Error | Mass of contents in the container in Q3. This data element is required. |
| RR0112 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q3. This data element is required. |
| RR0113 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0114 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q3 to calculate the mass of contents in the container. This data element is required. |
| RR0115 | RR (RPT) | Data Completeness | Mass of contents in the container in Q4. This data element is required. |
| RR0116 | RR (RPT) | Screen Error | Mass of contents in the container in Q4. This data element is required. |
| RR0118 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q4. This data element is required. |
| RR0119 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0120 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q4 to calculate the mass of contents in the container. This data element is required. |
| RR0121 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1 . This data element is required. |
| RR0122 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0124 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1 . This data element is required. |
| RR0125 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0126 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0128 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2 . This data element is required. |
| RR0129 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0131 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2 . This data element is required. |
| RR0132 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0133 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0135 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3 . This data element is required. |
| RR0136 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0138 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3 . This data element is required. |
| RR0139 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0140 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0142 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4 . This data element is required. |
| RR0143 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0145 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4 . This data element is required. |
| RR0146 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0147 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0149 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR0150 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0152 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR0153 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0154 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0156 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR0157 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0159 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR0160 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0161 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0163 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR0164 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0166 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR0167 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0168 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0170 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR0171 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0173 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR0174 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0175 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0177 | RR (RPT) | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR0178 | RR (RPT) | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0180 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q1 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0181 | RR (RPT) | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR0182 | RR (RPT) | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0184 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q2 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0185 | RR (RPT) | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR0186 | RR (RPT) | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0188 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q3 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0189 | RR (RPT) | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR0190 | RR (RPT) | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0192 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q4 to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0193 | RR (RPT) | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR0194 | RR (RPT) | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0196 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q1 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0197 | RR (RPT) | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR0198 | RR (RPT) | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0200 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q2 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0201 | RR (RPT) | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR0202 | RR (RPT) | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0204 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q3 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0205 | RR (RPT) | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR0206 | RR (RPT) | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR0208 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q4 to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR0257 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR0258 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR0260 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR0261 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0262 | RR (RPT) | Data Completeness | Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| RR0263 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR0264 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR0266 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR0267 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0268 | RR (RPT) | Data Completeness | Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| RR0269 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR0270 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR0272 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR0273 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0274 | RR (RPT) | Data Completeness | Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| RR0275 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR0276 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR0278 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR0279 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0280 | RR (RPT) | Data Completeness | Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| RR0281 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR0282 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR0284 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR0285 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0286 | RR (RPT) | Data Completeness | Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| RR0287 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR0288 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR0290 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR0291 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0292 | RR (RPT) | Data Completeness | Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| RR0293 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR0294 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR0296 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR0297 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0298 | RR (RPT) | Data Completeness | Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| RR0299 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR0300 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR0302 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR0303 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0304 | RR (RPT) | Data Completeness | Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| RR0305 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q1 . This data element is required. |
| RR0306 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0307 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q2 . This data element is required. |
| RR0308 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0309 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q3 . This data element is required. |
| RR0310 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0311 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q4 . This data element is required. |
| RR0312 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0313 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q1 . This data element is required. |
| RR0314 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0315 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q2 . This data element is required. |
| RR0316 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0317 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q3 . This data element is required. |
| RR0318 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR0319 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in q4 . This data element is required. |
| RR0320 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1000 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter in Q1. This data element is required. |
| RR1002 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1004 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter in Q1. This data element is required. |
| RR1005 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1006 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. |
| RR1008 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter in Q2. This data element is required. |
| RR1009 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1011 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter in Q2. This data element is required. |
| RR1012 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1013 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. |
| RR1015 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter in Q3. This data element is required. |
| RR1016 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1018 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter in Q3. This data element is required. |
| RR1019 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1020 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. |
| RR1022 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter in Q4. This data element is required. |
| RR1023 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1025 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter in Q4. This data element is required. |
| RR1026 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1027 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter. This data element is required. |
| RR1029 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter in Q1. This data element is required. |
| RR1030 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1032 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter in Q1. This data element is required. |
| RR1033 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1034 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required |
| RR1036 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter in Q2. This data element is required. |
| RR1037 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1039 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter in Q2. This data element is required. |
| RR1040 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1041 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required |
| RR1043 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter in Q3. This data element is required. |
| RR1044 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1046 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter in Q3. This data element is required. |
| RR1047 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1048 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required |
| RR1050 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter in Q4. This data element is required. |
| RR1051 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1053 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter in Q4. This data element is required. |
| RR1054 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1055 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter. This data element is required |
| RR1057 | RR (RPT) | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q1. This data element is required. |
| RR1058 | RR (RPT) | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1060 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q1. This data element is required. |
| RR1061 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1062 | RR (RPT) | Data Completeness | Number of containers in Q1 for which substitute data procedures were used to calculate the volume of contents in the receiving container. This data element is required. |
| RR1064 | RR (RPT) | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q2. This data element is required. |
| RR1065 | RR (RPT) | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1067 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q2. This data element is required. |
| RR1068 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1069 | RR (RPT) | Data Completeness | Number of containers in Q2 for which substitute data procedures were used to calculate the volume of contents in the receiving container. This data element is required. |
| RR1071 | RR (RPT) | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q3. This data element is required. |
| RR1072 | RR (RPT) | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1074 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q3. This data element is required. |
| RR1075 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1076 | RR (RPT) | Data Completeness | Number of containers in Q3 for which substitute data procedures were used to calculate the volume of contents in the receiving container. This data element is required. |
| RR1078 | RR (RPT) | Data Completeness | Volume of contents in containers flow through the receiving flow meter in Q4. This data element is required. |
| RR1079 | RR (RPT) | Screen Error | Volume of contents in containers flow through the receiving flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1081 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume of contents in the container in Q4. This data element is required. |
| RR1082 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1083 | RR (RPT) | Data Completeness | Number of containers in Q4 for which substitute data procedures were used to calculate the volume of contents in the receiving container. This data element is required. |
| RR1085 | RR (RPT) | Data Completeness | Mass of contents in the container in Q1. This data element is required. |
| RR1086 | RR (RPT) | Screen Error | Mass of contents in the container in Q1. This data element is required. |
| RR1088 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q1. This data element is required. |
| RR1089 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1090 | RR (RPT) | Data Completeness | Number of containers in Q1 for which substitute data procedures were used to calculate the mass of contents in the receiving container. This data element is required |
| RR1092 | RR (RPT) | Data Completeness | Mass of contents in the container in Q2. This data element is required. |
| RR1093 | RR (RPT) | Screen Error | Mass of contents in the container in Q2. This data element is required. |
| RR1095 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q2. This data element is required. |
| RR1096 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1097 | RR (RPT) | Data Completeness | Number of containers in Q2 for which substitute data procedures were used to calculate the mass of contents in the receiving container. This data element is required |
| RR1099 | RR (RPT) | Data Completeness | Mass of contents in the container in Q3. This data element is required. |
| RR1100 | RR (RPT) | Screen Error | Mass of contents in the container in Q3. This data element is required. |
| RR1102 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q3. This data element is required. |
| RR1103 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1104 | RR (RPT) | Data Completeness | Number of containers in Q3 for which substitute data procedures were used to calculate the mass of contents in the receiving container. This data element is required |
| RR1106 | RR (RPT) | Data Completeness | Mass of contents in the container in Q4. This data element is required. |
| RR1107 | RR (RPT) | Screen Error | Mass of contents in the container in Q4. This data element is required. |
| RR1109 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass of contents in the container in Q4. This data element is required. |
| RR1110 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1111 | RR (RPT) | Data Completeness | Number of containers in Q4 for which substitute data procedures were used to calculate the mass of contents in the receiving container. This data element is required |
| RR1113 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR1114 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1116 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR1117 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1118 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1120 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR1121 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1123 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR1124 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1125 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1127 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR1128 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1130 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR1131 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1132 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1134 | RR (RPT) | Data Completeness | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR1135 | RR (RPT) | Screen Error | Volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1137 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR1138 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1139 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1141 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR1142 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1144 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR1145 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1146 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1148 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR1149 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1151 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR1152 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1153 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1155 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR1156 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1158 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR1159 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1160 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1162 | RR (RPT) | Data Completeness | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR1163 | RR (RPT) | Screen Error | Mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1165 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR1166 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1167 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the receiving flow meter that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1169 | RR (RPT) | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR1170 | RR (RPT) | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1172 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR1173 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1174 | RR (RPT) | Data Completeness | Number of containers in Q1 for which substitute data procedures were used to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1176 | RR (RPT) | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR1177 | RR (RPT) | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1179 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR1180 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1181 | RR (RPT) | Data Completeness | Number of containers in Q2 for which substitute data procedures were used to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1183 | RR (RPT) | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR1184 | RR (RPT) | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1186 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR1187 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1188 | RR (RPT) | Data Completeness | Number of containers in Q3 for which substitute data procedures were used to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1190 | RR (RPT) | Data Completeness | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR1191 | RR (RPT) | Screen Error | Volume of contents in the container that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1193 | RR (RPT) | Data Completeness | Standard or method used to calculate the volume received in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR1194 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1195 | RR (RPT) | Data Completeness | Number of containers in Q4 for which substitute data procedures were used to calculate the volume of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1197 | RR (RPT) | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR1198 | RR (RPT) | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1200 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q1. This data element is required. |
| RR1201 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1202 | RR (RPT) | Data Completeness | Number of containers in Q1 for which substitute data procedures were used to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1204 | RR (RPT) | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR1205 | RR (RPT) | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1207 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q2. This data element is required. |
| RR1208 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1209 | RR (RPT) | Data Completeness | Number of containers in Q2 for which substitute data procedures were used to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1211 | RR (RPT) | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR1212 | RR (RPT) | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1214 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q3. This data element is required. |
| RR1215 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1216 | RR (RPT) | Data Completeness | Number of containers in Q3 for which substitute data procedures were used to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1219 | RR (RPT) | Data Completeness | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR1220 | RR (RPT) | Screen Error | Mass of contents in containers flow through the receiving flow meter that is redelivered to another facility without being injected into your well in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1222 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass received in the container that is redelivered to another facility without being injected into your well in Q4. This data element is required. |
| RR1223 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1224 | RR (RPT) | Data Completeness | Number of containers in Q4 for which substitute data procedures were used to calculate the mass of contents in the container that is redelivered to another facility without being injected into your well. This data element is required. |
| RR1226 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR1227 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1229 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR1230 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1231 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| RR1232 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR1233 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1235 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR1236 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1237 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| RR1238 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR1239 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1241 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR1242 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1243 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| RR1244 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR1245 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1247 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR1248 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1249 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| RR1250 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR1251 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1253 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR1254 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1255 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| RR1256 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR1257 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1259 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR1260 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1261 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| RR1262 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR1263 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1265 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR1266 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1267 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| RR1268 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR1269 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1271 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR1272 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1273 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| RR1274 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR1275 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1277 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR1278 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1279 | RR (RPT) | Data Completeness | Number of containers in Q1 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. |
| RR1281 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR1282 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1284 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR1285 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1286 | RR (RPT) | Data Completeness | Number of containers in Q2 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. |
| RR1288 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR1289 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1291 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR1292 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1293 | RR (RPT) | Data Completeness | Number of containers in Q3 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. |
| RR1295 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR1296 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1298 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR1299 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1300 | RR (RPT) | Data Completeness | Number of containers in Q4 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. |
| RR1302 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR1303 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1305 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR1306 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1307 | RR (RPT) | Data Completeness | Number of containers in Q1 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. |
| RR1309 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR1310 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1312 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR1313 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1314 | RR (RPT) | Data Completeness | Number of containers in Q2 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. |
| RR1316 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR1317 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1319 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR1320 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1321 | RR (RPT) | Data Completeness | Number of containers in Q3 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. |
| RR1323 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR1324 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR1326 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR1327 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR1328 | RR (RPT) | Data Completeness | Number of containers in Q4 for which substitute data procedures were used to calculate the CO2 concentration in the flow. This data element is required. |
| RR1330 | RR (RPT) | Data Completeness | Total net mass of CO2 received annually. This data element is required. |
| RR1334 | RR (RPT) | Screen Error | Total net mass of CO2 received annually. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR1335 | RR (RPT) | Screen Error | Total net mass of CO2 received annually. This data element is required. |
| RR2001 | RR (RPT) | Data Completeness | Volumetric flow through the injection flow meter in Q1. This data element is required. |
| RR2002 | RR (RPT) | Screen Error | Volumetric flow through the injection flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2004 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the injection flow meter in Q1. This data element is required. |
| RR2005 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2006 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the injection flow meter. This data element is required. |
| RR2008 | RR (RPT) | Data Completeness | Volumetric flow through the injection flow meter in Q2. This data element is required. |
| RR2009 | RR (RPT) | Screen Error | Volumetric flow through the injection flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2011 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the injection flow meter in Q2. This data element is required. |
| RR2012 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2013 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the injection flow meter. This data element is required. |
| RR2015 | RR (RPT) | Data Completeness | Volumetric flow through the injection flow meter in Q3. This data element is required. |
| RR2016 | RR (RPT) | Screen Error | Volumetric flow through the injection flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2018 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the injection flow meter in Q3. This data element is required. |
| RR2019 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2020 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the injection flow meter. This data element is required. |
| RR2022 | RR (RPT) | Data Completeness | Volumetric flow through the injection flow meter in Q4. This data element is required. |
| RR2023 | RR (RPT) | Screen Error | Volumetric flow through the injection flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2025 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the injection flow meter in Q4. This data element is required. |
| RR2026 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2027 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the injection flow meter. This data element is required. |
| RR2029 | RR (RPT) | Data Completeness | Mass flow through the injection flow meter in Q1. This data element is required. |
| RR2030 | RR (RPT) | Screen Error | Mass flow through the injection flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2032 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the injection flow meter in Q1. This data element is required. |
| RR2033 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2034 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the injection flow meter. This data element is required |
| RR2036 | RR (RPT) | Data Completeness | Mass flow through the injection flow meter in Q2. This data element is required. |
| RR2037 | RR (RPT) | Screen Error | Mass flow through the injection flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2039 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the injection flow meter in Q2. This data element is required. |
| RR2040 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2041 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the injection flow meter. This data element is required |
| RR2043 | RR (RPT) | Data Completeness | Mass flow through the injection flow meter in Q3. This data element is required. |
| RR2044 | RR (RPT) | Screen Error | Mass flow through the injection flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2046 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the injection flow meter in Q3. This data element is required. |
| RR2047 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2048 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the injection flow meter. This data element is required |
| RR2050 | RR (RPT) | Data Completeness | Mass flow through the injection flow meter in Q4. This data element is required. |
| RR2051 | RR (RPT) | Screen Error | Mass flow through the injection flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2053 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the injection flow meter in Q4. This data element is required. |
| RR2054 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2055 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the injection flow meter. This data element is required |
| RR2057 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR2058 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR2060 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR2061 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2062 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| RR2063 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR2064 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR2066 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR2067 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2068 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| RR2069 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR2070 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR2072 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR2073 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2074 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| RR2075 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR2076 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR2078 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR2079 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2080 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| RR2081 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR2082 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR2084 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR2085 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2086 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| RR2087 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR2088 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR2090 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR2091 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2092 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| RR2093 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR2094 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR2096 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR2097 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2098 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| RR2099 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR2100 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR2102 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR2103 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR2104 | RR (RPT) | Data Completeness | Were substitute data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| RR2105 | RR (RPT) | Data Completeness | Total net mass of CO2 injected annually. This data element is required. |
| RR2108 | RR (RPT) | Screen Error | Total net mass of CO2 injected annually. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR2109 | RR (RPT) | Screen Error | Total net mass of CO2 received annually. This data element is required. |
| RR3001 | RR (RPT) | Data Completeness | Volumetric flow through the separator flow meter in Q1. This data element is required. |
| RR3002 | RR (RPT) | Screen Error | Volumetric flow through the separator flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3004 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the separator flow meter in Q1. This data element is required. |
| RR3005 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3006 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the volumetric flow through the separator flow meter. This data element is required. |
| RR3008 | RR (RPT) | Data Completeness | Volumetric flow through the separator flow meter in Q2. This data element is required. |
| RR3009 | RR (RPT) | Screen Error | Volumetric flow through the separator flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3011 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the separator flow meter in Q2. This data element is required. |
| RR3012 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3013 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the volumetric flow through the separator flow meter. This data element is required. |
| RR3015 | RR (RPT) | Data Completeness | Volumetric flow through the separator flow meter in Q3. This data element is required. |
| RR3016 | RR (RPT) | Screen Error | Volumetric flow through the separator flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3018 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the separator flow meter in Q3. This data element is required. |
| RR3019 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3020 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the volumetric flow through the separator flow meter. This data element is required. |
| RR3022 | RR (RPT) | Data Completeness | Volumetric flow through the separator flow meter in Q4. This data element is required. |
| RR3023 | RR (RPT) | Screen Error | Volumetric flow through the separator flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3025 | RR (RPT) | Data Completeness | Standard or method used to calculate the volumetric flow through the separator flow meter in Q4. This data element is required. |
| RR3026 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3027 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the volumetric flow through the separator flow meter. This data element is required. |
| RR3029 | RR (RPT) | Data Completeness | Mass flow through the separator flow meter in Q1. This data element is required. |
| RR3030 | RR (RPT) | Screen Error | Mass flow through the separator flow meter in Q1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3032 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the separator flow meter in Q1. This data element is required. |
| RR3033 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3034 | RR (RPT) | Data Completeness | Number of days in Q1 for which substitute data procedures were used to calculate the mass flow through the separator flow meter. This data element is required |
| RR3036 | RR (RPT) | Data Completeness | Mass flow through the separator flow meter in Q2. This data element is required. |
| RR3037 | RR (RPT) | Screen Error | Mass flow through the separator flow meter in Q2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3039 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the separator flow meter in Q2. This data element is required. |
| RR3040 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3041 | RR (RPT) | Data Completeness | Number of days in Q2 for which substitute data procedures were used to calculate the mass flow through the separator flow meter. This data element is required |
| RR3043 | RR (RPT) | Data Completeness | Mass flow through the separator flow meter in Q3. This data element is required. |
| RR3044 | RR (RPT) | Screen Error | Mass flow through the separator flow meter in Q3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3046 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the separator flow meter in Q3. This data element is required. |
| RR3047 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3048 | RR (RPT) | Data Completeness | Number of days in Q3 for which substitute data procedures were used to calculate the mass flow through the separator flow meter. This data element is required |
| RR3050 | RR (RPT) | Data Completeness | Mass flow through the separator flow meter in Q4. This data element is required. |
| RR3051 | RR (RPT) | Screen Error | Mass flow through the separator flow meter in Q4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3053 | RR (RPT) | Data Completeness | Standard or method used to calculate the mass flow through the separator flow meter in Q4. This data element is required. |
| RR3054 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3055 | RR (RPT) | Data Completeness | Number of days in Q4 for which substitute data procedures were used to calculate the mass flow through the separator flow meter. This data element is required |
| RR3057 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR3058 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR3060 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR3061 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3062 | RR (RPT) | Data Completeness | Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| RR3063 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR3064 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR3066 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR3067 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3068 | RR (RPT) | Data Completeness | Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| RR3069 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR3070 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR3072 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR3073 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3074 | RR (RPT) | Data Completeness | Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| RR3075 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR3076 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR3078 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR3079 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3080 | RR (RPT) | Data Completeness | Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| RR3081 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q1. This data element is required. |
| RR3082 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q1. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR3084 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q1. This data element is required. |
| RR3085 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3086 | RR (RPT) | Data Completeness | Were missing data procedures used in Q1 to calculate the CO2 concentration in the flow. This data element is required. |
| RR3087 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q2. This data element is required. |
| RR3088 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q2. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR3090 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q2. This data element is required. |
| RR3091 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3092 | RR (RPT) | Data Completeness | Were missing data procedures used in Q2 to calculate the CO2 concentration in the flow. This data element is required. |
| RR3093 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q3. This data element is required. |
| RR3094 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q3. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR3096 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q3. This data element is required. |
| RR3097 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3098 | RR (RPT) | Data Completeness | Were missing data procedures used in Q3 to calculate the CO2 concentration in the flow. This data element is required. |
| RR3099 | RR (RPT) | Data Completeness | CO2 concentration in the flow in Q4. This data element is required. |
| RR3100 | RR (RPT) | Screen Error | CO2 concentration in the flow in Q4. This value should be reported as a decimal fraction, and should be within the range of 0 to 1. You must correct the current value before continuing. |
| RR3102 | RR (RPT) | Data Completeness | Standard or method used to calculate the CO2 concentration in the flow in Q4. This data element is required. |
| RR3103 | RR (RPT) | Data Completeness | Other Standard or Method. This data element is required. |
| RR3104 | RR (RPT) | Data Completeness | Were missing data procedures used in Q4 to calculate the CO2 concentration in the flow. This data element is required. |
| RR3105 | RR (RPT) | Data Completeness | Total net mass of CO2 produced annually. This data element is required. |
| RR3108 | RR (RPT) | Screen Error | Total net mass of CO2 produced annually. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| RR3109 | RR (RPT) | Data Completeness | The entrained CO2 in produced oil or other fluid divided by the CO2 separated through all separators in the reporting year. This data element is required. |
| RR3110 | RR (RPT) | Data Quality | Do you have an approved MRV plan. EPA expects that Subpart RR will only be reported with an approved MRV plan. |
| RR3111 | RR (RPT) | Screen Error | Total net mass of CO2 received annually. This data element is required. |
| RR3112 | RR (RPT) | Screen Error | Cumulative mass of CO2 (metric tons) reported as sequestered in subsurface geologic formations in all years since the well or group of wells became subject to reporting requirements under this subpart. You have indicated that you want to override this value, and did not input a new value. |
| RR3113 | RR (RPT) | Data Completeness | Annual CO2 received. This data element is required. |
| RR4001 | RR (RPT) | Data Completeness | You have selected Subpart RR for reporting, but you have not yet added a flow meter or container. |
| RR4002 | RR (RPT) | Data Completeness | You have selected Subpart RR for reporting, but you have not yet added an injection flow meter. |
| RR4003 | RR (RPT) | Data Completeness | You have selected Subpart RR for reporting, but you have not yet added a separator flow meter. |
| RR4004 | RR (RPT) | Data Completeness | You have selected Subpart RR for reporting, but you have not yet added a leakage pathway. |
| RR4005 | RR (RPT) | Screen Error | Equation used to calculate annual mass of CO2 sequestered. This data element is required. |
| RR4006 | RR (RPT) | Data Completeness | Mass of CO2 emitted annually from equipment leaks and vented emissions of CO2 from equipment located on the surface between the flow meter used to measure injection quantity and the injection wellhead. This data element is required. |
| RR4007 | RR (RPT) | Data Completeness | Mass of CO2 emitted annually from equipment leaks and vented emissions of CO2 from equipment located on the surface between the production wellhead and the flow meter used to measure production quantity. This data element is required. |
| RR4008 | RR (RPT) | Data Completeness | Sources of CO2 Received. This data element is required. |
| RR4009 | RR (RPT) | Data Completeness | Does the facility have an approved MRV plan? This data element is required. |
| RR4010 | RR (RPT) | Data Completeness | EPA approval date of most recently approved MRV plan. This data element is required. |
| RR4011 | RR (RPT) | Data Completeness | MRV Plan approval number that was issued by EPA. This data element is required. |
| RR4012 | RR (RPT) | Screen Error | Measurement Type. This data element is required. |
| RR4013 | RR (RPT) | Screen Error | Is CO2 received at the facility mixed with other supplies of CO2 or are the procedures in 98.444(a)(4) followed? This data element is required. |
| RR4014 | RR (RPT) | Screen Error | Measurement Type. This data element is required. |
| RR4015 | RR (RPT) | Screen Error | Location of flow meter. This data element is required. |
| RR4016 | RR (RPT) | Screen Error | Measurement Type. This data element is required. |
| RR4017 | RR (RPT) | Data Completeness | Mass of CO2 emitted through the pathway in the reporting year. This data element is required. |
| RR4018 | RR (RPT) | Screen Error | Please select a file to upload. |
| RR4019 | RR (RPT) | Screen Error | File size is greater than the maximum of 30 MB. |
| RR4020 | RR (RPT) | Screen Error | Identification Number. Row {1}. This data element is required. |
| RR4021 | RR (RPT) | Screen Error | Underground Injection Control Permit Class. Row {1}. This data element is required. |
| RR4022 | RR (RPT) | Screen Error | ID For The Legal Instrument Authorizing Geologic Sequestration. This data element is required. |
| RR4023 | RR (RPT) | Data Completeness | You have selected Subpart RR for reporting, but you have not yet uploaded an annual monitoring report. |
| RR4024 | RR (RPT) | Data Completeness | You have selected Subpart RR for reporting, but you have not yet added an injection well. |
| RR4025 | RR (RPT) | Data Completeness | You have selected Subpart RR for reporting and marked that you have one or more offshore wells, but you have not yet added an offshore well. |
| RR4026 | RR (RPT) | Data Completeness | Date the facility began collecting data for calculating total amount sequestered according to §98.448(a)(7) of this subpart. This data element is required. |
| RR4027 | RR (RPT) | Screen Error | Identification Number. Row {1}. This identification number is already used. |
| RR4028 | RR (RPT) | Data Completeness | You have selected Subpart RR for reporting, but you have not yet marked whether you have one or more offshore wells. |
| RR5001 | RR (RPT) | Screen Error | GHGRP ID (Facility and injection wells tab, cell D20). This data element is required and must be equal to the GHGRP ID for the facility. |
| RR5002 | RR (RPT) | Screen Error | Reporting Period (Facility and injection wells tab, cell D1). This data element is required and must be equal to the expected reporting year. |
| RR5003 | RR (RPT) | Screen Error | Name or ID. Please provide a numerical identifier; use of alphabetic characters is not permitted. |
| RRXXXX | RR (RPT) | Screen Error | Equation used to calculate annual mass of CO2 sequesterd. This data element is required. |
| T0001 | T | Screen Error | You have not added a Production Process Type. This data element is required. Please enter the required data or click CANCEL. |
| T0002 | T | Screen Error | Production Process Type. You selected "Other Process" from the pick list provided, but failed to provide a description of the process in the text box provided. This data element is required. You must enter a description of the "other" production process before continuing. |
| T0003 | T | Data Completeness | Amount of Magnesium Produced or Processed for this Production Process Type. This data element is required. You must enter the amount of magnesium produced or processed by this production process before continuing. |
| T0004 | T | Screen Error | Amount of Magnesium Produced or Processed for this Production Process Type. You must enter a value that is greater than zero. You must correct the current value before continuing. |
| T0005 | T | Data Completeness | You have not added a Production Unit. You must enter a production unit for this production process before continuing. |
| T0006 | T | Data Completeness | Flow Rate of Cover/Carrier Gas. This data element is required. You must enter the gas flow rate before continuing. |
| T0007 | T | Screen Error | Flow Rate of Cover/Carrier Gas. You must enter a value that is greater than zero. You must correct the current value before continuing. |
| T0008 | T | Data Completeness | You have not added a cover or carrier gas to the Cover/Carrier Gas Composition Table. You must enter cover and carrier gases before continuing. |
| T0009 | T | Screen Error | Gas Type. This data element is required. Please enter the required data or click CANCEL. |
| T001 | T | Data Completeness | You have not added a production process. Please add a production process before continuing. |
| T0010 | T | Screen Error | GHG Name. Please enter the required data or click CANCEL. |
| T0011 | T | Screen Error | GHG Name. Please enter the required data or click CANCEL. |
| T0012 | T | Data Completeness | Volume Percent. The volume percent is missing for the cover gas. The percentage composition data for each cover gas is a required data element. You must enter a volume percent before continuing. |
| T0013 | T | Screen Error | Volume Percent. This value should be reported as a percentage, and should be within the range of 0 to 100 %. The value you provided is outside that range. You must correct the current value before continuing. |
| T0014 | T | Screen Error | GHG Gas. This data element is required. Please enter the required data or click CANCEL. |
| T0015 | T | Screen Error | F-GHG Name. Please enter the required data or click CANCEL. |
| T0017 | T | Data Completeness | Annual Cover Gas Usage Rate. This data element is required. |
| T0018 | T | Screen Error | Annual Cover Gas Usage Rate. For cover gases you must enter a value that is greater than zero. For carrier gases you must enter zero. You must correct the current value before continuing. |
| T0019 | T | Data Completeness | Total Annual Emissions resulting from use of GHG. This data element is required. You must enter total annual emissions for the GHG before continuing. |
| T002 | T | Data Completeness | You have not added a GHG to the GHG Emissions Table. This data element is required. You must select a GHG in the GHG Emissions Table before continuing. |
| T0020 | T | Screen Error | Total Annual Emissions resulting from use. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| T0021 | T | Data Completeness | Were missing data provisions used to estimate emissions for this GHG? This data element is required. |
| T0022 | T | Data Completeness | Missing Data Method used to estimate emissions. This data element is required. |
| T0023 | T | Data Completeness | Time period (p) during which method was used. This data element is required. |
| T0024 | T | Screen Error | Time period (p) during which method was used. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| T0025 | T | Data Completeness | Quantity of emissions estimated using missing data method procedures. This data element is required. |
| T0026 | T | Screen Error | Quantity of emissions estimated using method. You must enter a value that is greater than zero. You must correct the current value before continuing. |
| T0028 | T | Screen Error | Cover Gas Name. This data element is required. Please enter the required data or click CANCEL. |
| T0029 | T | Screen Error | Carrier Gas Name. This data element is required. Please enter the required data or click CANCEL. |
| T0030 | T | Screen Error | Specify "Other Non-GHG Carrier Gas". You selected "Other Non-GHG Carrier Gas" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| T0031 | T | Data Completeness | Volume Percent. The volume percent is missing for the carrier gas. The percentage composition data for each carrier gas is a required data element. You must enter a volume percent before continuing. |
| T0032 | T | Screen Error | Volume Percent. This value should be reported as a percentage, and should be within the range of 0 to 100 %. The value you provided is outside that range. You must correct the current value before continuing. |
| T0033 | T | Screen Error | Method used to calculate emissions. This data element is required. Please select the calculation method used to calculate emissions of this GHG. |
| T0034 | T | Data Completeness | Units of time (e.g., hours or days) for the time period during which missing data provisions were used. Time period (p) measurement. This data element is required. |
| T0036 | T | Screen Error | Time period (p)during which method was used. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| T0046 | T | Screen Error | Unit Type. You selected "Other Unit" from the pick list provided, but failed to provide a description of the unit in the text box provided. This data element is required. You must enter a description of the production unit before continuing. |
| T0048 | T | Screen Error | Chemical Abstract Registry Number. A match is found with the same cas number. The gas cannot be added. |
| T0050 | T | Screen Error | CAS Number. Please enter the required data or click CANCEL. |
| T0052 | T | Screen Error | CAS Number. Please enter the required data or click CANCEL. |
| T0054 | T | Screen Error | Specify "Other Non-GHG Cover Gas". You selected "Other Non-GHG Cover Gas" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| T0055 | T | Screen Error | Group to which this f-GHG belongs. Please provide the group to which this f-GHG belongs. |
| T0056 | T | Screen Error | You cannot add this greenhouse gas because the CAS Registry Number you have provided for this "other" gas matches with an existing 40 CFR Part 98 Table A-1 gas, or it matches with an "other" gas that has already been added. It is possible it is included in the selection list provided, but with a different chemical name than the one you are using. The gas with the matching CAS Registry Number is identified within e-GGRT as follows: CAS Registry Number: {1}; Gas Name: {2}; Chemical Formula: {3}. If you would like to select this gas, click CANCEL and locate the gas on the selection list provided. If you are unable to locate this gas on the selection list provided, please <a href=http://www.ccdsupport.com/confluence/display/help/Contact+the+Help+Desk+-+Issues+Related+to+the+Identification+of+Specific+f-GHGs target=_blank>contact the GHGRP Help Desk</a>. |
| T0057 | T | Screen Error | Group to which this f-GHG belongs. Please provide the group to which this f-GHG belongs. |
| T0058 | T | Screen Error | Group to which this f-GHG belongs. Please provide the group to which this f-GHG belongs. |
| T0060 | T | Screen Error | Chemical Formula for other GHG cover or carrier gas. Please provide the chemical formula of the other GHG cover or carrier gas. |
| T0061 | T | Screen Error | Chemical Formula for other GHG cover gas. If known, please provide the chemical formula of the other GHG cover gas. |
| T0062 | T | Screen Error | Chemical Formula for other GHG carrier gas. If known, please provide the chemical formula of the other GHG carrier gas. |
| T100 | T | Screen Error | The Production Process Type you have selected already exists. |
| T101 | T | Screen Error | The GHG you have selected already exists in the GHG Emissions Table. |
| T102 | T | Screen Error | The GHG Gas Name or CAS Number you have selected already exists. |
| TODO | T | Data Completeness | DANIECA1 |
Overview
Content Tools
ThemeBuilder
Tasks