This topic provides a step-by-step description of how to enter subpart PP Suppliers of Carbon Dioxide Product and Equipment Information for this Supplier.
Click image to expand
To add or update subpart PP Product and Equipment Information for this Supplier, locate the MISCELLANEOUS INFORMATION table on the Subpart Overview page, and click OPEN.
Click image to expand
Subpart PP requires capture and extract facilities to report the following information at the facility level; importers and exporters must report the information at the corporate level:
This information must be input to Cal e-GGRT.
When finished, click SAVE.
To add a type of equipment, click the link labeled “ADD a Type of Equipment” located below the TYPES OF EQUIPMENT USED TO MEASURE THE TOTAL FLOW OF THE CO2 STREAM table.
Click image to expand
Use the drop-down menu to select an equipment type and use the text box to enter the name of the standard used to operate and calibrate the equipment. If you select “other” as the equipment type, enter a description in the text box that appears to the right of the drop-down menu.
Ensure that the type of equipment you select in the equipment type drop-down menu corresponds to the calculation methodology you select and the measurement type you select for each flow meter or CO2 stream added. For example, if you select “flow meters with segregation” as your calculation methodology and add a flow meter on the Subpart Overview page with “mass basis” as measure type, then you should select “mass flow meter” from the equipment type drop-down menu.
When finished, click SAVE.
Repeat this step until you have added all types of equipment you used to measure the total flow of CO2.
Click image to expand
Once all types of equipment used to measure the total flow of CO2 streams have been added to the table, use the text boxes to enter the aggregated annual quantity of CO2 transferred to each end-use category and the number of days in the reporting year for which substitute data procedures were used to measure CO2 mass or volume, concentration, and stream density.
Enter a value in each text box. If no CO2 was transferred to one or more of the end-use categories, or if substitute data procedures were not used for one or more of the data elements, the value “0” must be entered in each applicable text box.
For importers and exporters, do not distinguish between quantities imported to an end-use category and quantities exported to an end-use category. In each end-use category text box, enter the aggregated quantity imported and exported.
Ensure that the total amount of CO2 transferred to end-use categories is equivalent to the total CO2 supply displayed on the Subpart Overview page.
When finished, click SAVE.
See Also
Screen Errors
Using Cal e-GGRT to Prepare Your Subpart PP Report
Subpart PP Summary Information for this Supplier
Subpart PP Supply Information
Subpart Validation Report