Step 1: Add a unit

To add a unit that is NOT monitored by a CEMS, find the HYDROGEN PRODUCTION UNITS table on the Subpart Overview page and click the link titled "ADD a Unit"

To add a unit that is monitored by a CEMS, find the HYDROGEN PRODUCTION UNITS (Units Monitored by CEMS) table on the Subpart Overview page and click the link titled "ADD a Unit Monitored by CEMS"

To edit a unit, click the edit icon or the Name/ID link located in the first column of the table

To delete a unit, click the delete icon located in the last column of the table

Step 2: Indicate CEMS utilization for a unit

For each process unit, confirm whether or not the process unit utilizes CEMS

Note that when adding a new unit you are prompted to answer the CEMS question immediately (the answer to this question will default to "No" for units added using the "ADD a Unit" link and will default to "Yes" for units added using the "ADD a Unit Monitored by CEMS" link)

The CEMS response may be changed here and the unit information will be relocated to the appropriate table on the Subpart Overview page

When finished, click SAVE

Step 3: Enter required information for a unit

For each process unit, report the following required information:

• Wiki Markup
  A unique name or identifier for the unit, plus optional description for this unit (see also [About Unique Unit Names]) \[98.166(a)(1) and 98.166(b)(1)\]

• Wiki Markup
  The quantity of hydrogen produced (in metric tons) \[98.166(a)(2) and 98.166(b)(3)\]

• Wiki Markup
  The quantity of ammonia produced (in metric tons) \[98.166(a)(3) 98.166(b)(4)\]

• Wiki Markup
  The name and type (solid, liquid, or gaseous) of each fuel or feedstock used in the unit \[98.166(b)(2)\]

To add a fuel or feedstock for a unit, find the FUELS AND FEEDSTOCKS table on the Add/Edit a Unit page and click the link titled "ADD a Fuel or Feedstock"

To edit a fuel or feedstock, click the edit icon or the Name/ID link located in the first column of the FUELS AND FEEDSTOCKS table

To delete a fuel or feedstock, click the delete icon located in the last column of the FUELS AND FEEDSTOCKS table

For each fuel or feedstock used in a unit, enter a name and type (see also About Unique Unit Names)

When you are finished entering fuel/feedstock information, click SAVE to return to the Add/Edit a Unit page

Step 4: Save entered data for a unit

When you are finished entering all information for a unit, click SAVE to return to the Subpart Overview page

Step 5: Repeat Steps 1-4

Repeat Steps 1-4 until all process units have been added for your facility

#Back to Top

See Also

Screen Errors
Using e-GGRT to Prepare Your Subpart P Report
Subpart P Summary Information for this Facility
Subpart P Process Unit Information for a Unit
Subpart P Emissions Information for Process Units NOT Monitored by CEMS
Subpart P Emissions Information for Process Units Monitored by CEMS
Subpart Validation Report