longname |
---|
Q67. Where the heat input capacity of a combustion unit is less than 250 mmBtu per hour input capacity and the unit is not subject to Tier 3 or 4 per Subpart Y of Part 98, and where there might be more than one fuel type fed to the same combustion unit, can the Tier 2 method be used to calculate emissions by using measured HHV values of input streams or a measured HHV of the mixed stream?
|
A67. For fuels that are blended prior to combustion, you may: (1) use the weighted HHV value based on the relative proportion of each fuel in the blend and a weighted average CO2 emission factor from Table C-1; or (2) use the HHV value determined by collecting and analyzing a representative sample of the blended fuel and using a weighted average CO2 emission factor from Table C-1, based on the relative portion of each fuel in the blend. See 98.34(a)(3).
Wiki Markup |
---|
{show-to:group=confluence-Users}{center}{_}Footer / References Bar which is Visible to the public{_}{center}{show-to} |
Panel |
---|
Updated on Wiki Markup |
---|
{page-info:modified-date|dateformat=dd/MM/YY HH:mm} |
|
Wiki Markup |
---|
{show-to:group=confluence-Users}
{info}
Source: This question and answer was derived from a Legacy FAQ
\\
Approval / Publishing History: Version 1, approved by M. Hannan, 1/23/2013
\\
Expiration: none
\\
Relevant Subparts: Subpart x
{info}{center}{_}History Panel For Internal Use - Not Visible to the Public{_}{center}{show-to} |