...

To delete a kiln, click the delete icon or red "x" “x” located in the last column of the table.

{composition-setup}{composition-setup}

{toggle-cloak

:id

=PNG1}

{cloak:id=PNG1|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

Step 2: Indicate CEMS utilization for a kiln

...

The CEMS response may be changed here and the kiln information will be relocated to the appropriate table on the Subpart Overview page.

When finished, click SAVE.

{toggle-cloak

:id

=PNG2}

{cloak:id=PNG2|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

Step 3: Indicate method for estimating annual CO₂ for a kiln

...

When finished, click SAVE.

{toggle-cloak

:id

=PNG3}

{cloak:id=PNG3|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

Step 4: Enter required information for a kiln

...

For each kiln that annual CO₂ emissions from raw materials are based on consumption of individual raw materials, you must also provide a unique identifier/description for each raw material consumed in the kiln during the reporting year.

{toggle-cloak

:id

=PNG4}

{cloak:id=PNG4|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

To add a raw material consumed in a kiln, click "Add A Raw Material" and enter the required information.

When finished, click SAVE to save the raw material and return to the Add/Edit a Cement Kiln page.

{toggle-cloak

:id

=PNG5}

{cloak:id=PNG5|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

Step 5: Save entered kiln data

When you have finished entering data for a kiln, click SAVE to save all entered data then click BACK TO OVERVIEW to return to the Subpart Overview page.

{toggle-cloak

:id

=PNG6}

{cloak:id=PNG6|cloak.toggle.type=none|cloak.toggle.zone=true}

{cloak}

Step 6: Enter additional required annual, quarterly, and monthly information for a kiln

To enter additional required annual, quarterly, and monthly information for a kiln that is NOT monitored by a CEMS, locate the kiln in the CEMENT KILN SUMMARY table on the Subpart Overview page and click OPEN.

{toggle-cloak

:id

=PNG7}

{cloak:id=PNG7|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

Step 6a: Additional Required Annual Information

...

• The number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption used in the determination of the annual consumption quantity. You must enter a value in this field. If missing data procedures were not applied enter '0'.
• The number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. You must enter a value in this field. If missing data procedures were not applied enter '0'.

{toggle-cloak

:id

=PNG8}

{cloak:id=PNG8|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

Alternatively, for each kiln for which the facility indicated that annual CO₂ emissions from raw materials are to be based on consumption of individual raw materials, and for each raw material, enter the following required information:

• The number of months a missing data procedure was used to determine a monthly quantity of the raw material consumed used in the determination of the annual consumption quantity. You must enter a value in this field. If missing data procedures were not applied enter '0'.
• The number of times a missing data procedure was used to determine the organic carbon content of the raw material. You must enter a value in this field. If missing data procedures were not applied enter '0'.

{toggle-cloak

:id

=PNG9}

{cloak:id=PNG9|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

When finished, click QUARTERLY INFO.

...

For each quarter and for each kiln, enter the following required information:

• Wiki MarkupAn indication if a missing data procedure was used to determine the quantity of cement kiln dust (CKD) not recycled to the kiln \ [98.86(b)(14)(iv)]unmigrated-wiki-markup
• An indication if a missing data procedure was used to determine the fraction of non-calcined CaO in CKD not recycled to the kiln \ [98.86(b)(14)(v)]
• Wiki MarkupThe method used to determine the fraction of non-calcined CaO in CKD not recycled to the kiln \ [98.86(b)(9)]unmigrated-wiki-markup
• An indication if a missing data procedure was used to determine the fraction of non-calcined MgO in CKD not recycled to the kiln \ [98.86(b)(14)(v)]
• Wiki MarkupThe method used to determine the fraction of non-calcined MgO in CKD not recycled to the kiln \ [98.86(b)(9)]

{toggle-cloak

:id

=PNG10}

{cloak:id=PNG10|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

When finished, click MONTHLY INFO.

Step 6c: Additional Required Monthly Information

• Wiki MarkupAn indication if monthly kiln-specific clinker factors were used to determine monthly clinker production \ [98.86(b)(15)]
• Wiki MarkupThe method used to determine the monthly clinker production \ [98.86(b)(15)]. A drop-down menu is provided reflecting provisions in 98.3 and 98.84(d).unmigrated-wiki-markup
• The method used to determine the fraction of non-calcined CaO in clinker \ [98.86(b)(7)]. See 98.84(g) for more information on applicable methods.unmigrated-wiki-markup
• The method used to determine the fraction of non-calcined MgO in clinker \ [98.86(b)(7)]. See 98.84(g) for more information on applicable methods.
• Wiki MarkupAn indication if a missing data procedure was used to determine the monthly clinker production \ [98.86(b)(14)\(i)] Wiki Markup
• An indication if a missing data procedure was used to determine the fraction of total CaO in clinker \ [98.86(b)(14)(ii)] Wiki Markup
• An indication if a missing data procedure was used to determine the fraction of total MgO in clinker \ [98.86(b)(14)(ii)]unmigrated-wiki-markup
• An indication if a missing data procedure was used to determine the fraction of non-calcined CaO in clinker \ [98.86(b)(14)(iii)] Wiki Markup
• An indication if a missing data procedure was used to determine the fraction of non-calcined MgO in clinker \ [98.86(b)(14)(iii)]

{toggle-cloak

:id

=PNG11}

{cloak:id=PNG11|cloak.toggle.type=none|cloak.toggle.zone=true}

{cloak}

When finished, click FINISHED to save your data and return to the Subpart Overview page.

...