...

To select a unit for which to enter emissions data, find the unit in the HYDROGEN PROCESSING UNITS table and click OPEN

{composition-setup}{composition-setup}

{toggle-cloak

:id

=PNG1}

{cloak:id=PNG1|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

Step 2: Equation Summary and Result

...

• For gaseous feedstock, the link will read "Equation “Equation P-1 Calculation Spreadsheet"Spreadsheet”
• For liquid feedstock, the link will read "Equation “Equation P-2 Calculation Spreadsheet"Spreadsheet”
• For solid feedstock, the link will read "Equation “Equation P-3 Calculation Spreadsheet"Spreadsheet”

For each fuel:

• Follow the link provided
• Follow instructions to complete spreadsheet and export .xml data
• Upload .xml file using the BROWSE and UPLOAD buttons provided.

{toggle-cloak

:id

=PNG2}

{cloak:id=PNG2|cloak.toggle.type=none|cloak.toggle.zone=true}

{cloak}

For each fuel/feedstock used in each process unit, follow the link titled "Indicate “Indicate which are based on substitute data values" values” and provide the following monthly values as appropriate:

...

• An indication if the monthly consumption is based on one or more substitute data values calculated per the procedures described in §98.165(a) \ [98.3(c)(8)\]unmigrated-wiki-markup
• An indication if the monthly carbon content is based on one or more substitute data values calculated per the procedures described in §98.165(b) \ [98.3(c)(8)\] Wiki Markup
• An indication if the monthly molecular weight is based on one or more substitute data values calculated per the procedures described in §98.165(b) \ [98.3(c)(8)\] (applies to gaseous feedstocks only)

{toggle-cloak

:id

=PNG3}

{cloak:id=PNG3|cloak.toggle.type=none|

cloak.toggle.zone=true}

{cloak}

When finished, click SAVE

...

After you save the data on this page, the next time you open the page, the calculator on the top of the page will display the CO₂ process emissions for a unit, rounded to the nearest metric ton: the value displayed is for informational purposes only

{toggle-cloak

:id

=PNG4}

{cloak:id=PNG4|cloak.toggle.type=none|cloak.toggle.zone=true}

{cloak}

Step 4: Repeat Steps 1-3

Repeat Steps 1-3 until emissions data has been entered for all process units NOT monitored by a CEMS

...