...
Cloak | ||||||
---|---|---|---|---|---|---|
| ||||||
|
Step 2:
...
For each process unit, confirm whether or not the process unit utilizes CEMS.
Note that when adding a new process unit you are prompted to answer the CEMS question immediately (the answer to this question will default to "No" for process unit added using the "ADD a Unit" link and will default to "Yes" for units added using the "ADD a CEMS Unit" link).
The CEMS response may be changed here and the process unit information will be relocated to the appropriate table on the Subpart Overview page.
When finished, click SAVE.
...
Toggle Cloak | ||
---|---|---|
|
...
cloak.toggle.zone | true |
---|---|
id | PNG2 |
cloak.toggle.type | none |
...
Enter required information for the process unit
For each process unit monitored by CEMS at your facility, Subpart Q requires you to report the following information:
- A unique name or identifier for the process unit, plus optional description of the unit
- The type of process unit, selected from the following:
- Taconite indurating furnace
- Basic oxygen process furnace
- Non-recovery coke oven battery
- Sinter process
- Electric arc furnace (EAF)
- Decarburization vessel
- Direct reduction furnace
- Annual production of taconite pellets (metric tons)
- Annual production of molten steel (metric tons)
- Annual production of coke (metric tons)
- Annual production of sinter (metric tons)
- Annual production of direct reduced iron (metric tons)
When you are finished entering all required information for the process unit, click SAVE.
...
Cloak | ||||||
---|---|---|---|---|---|---|
| ||||||
|
Step
...
3: Repeat Steps 1-
...
2
Repeat Steps 1-3 2 until all process units monitored by CEMS have been added for your facility.
...