Step 1: Add a kiln

To add a kiln that is NOT monitored by a CEMS, find the CEMENT KILN SUMMARY (Cement kilns NOT monitored by CEMS) table on the Subpart Overview page and click the link titled "ADD a Cement Kiln."

To edit kiln identification information, click the edit icon or the Name/ID link located in the first column of the table.

To delete a kiln, click the delete icon or red "x" located in the last column of the table.

Step 2: Indicate CEMS utilization for a kiln

For each kiln that is NOT monitored by CEMS at your facility, confirm whether or not the kiln utilizes CEMS.

The CEMS response may be changed here and the kiln information will be relocated to the appropriate table on the Subpart Overview page.

When finished, click SAVE.

Step 3: Indicate method for estimating annual CO₂ for a kiln

For each kiln that is NOT monitored by CEMS at your facility, indicate if annual CO₂ emissions from raw materials will be estimated based on consumption of individual raw materials or based on the amount of raw kiln feed consumed annually.

When finished, click SAVE.

Step 4: Enter required information for a kiln

For each kiln that is NOT monitored by CEMS at your facility, Subpart H requires you to report the following information:

• A unique identifier and optional description

For each kiln that annual CO₂ emissions from raw materials are based on consumption of individual raw materials, you must also provide a unique identifier/description for each raw material consumed in the kiln during the reporting year.

To add a raw material consumed in a kiln, click "Add A Raw Material" and enter the required information.

When finished, click SAVE to save the raw material and return to the Add/Edit a Cement Kiln page.

Step 5: Save entered kiln data

When you have finished entering data for a kiln, click SAVE to save all entered data then click BACK TO OVERVIEW to return to the Subpart Overview page.

Step 6: Enter additional required annual, quarterly, and monthly information for a kiln

To enter additional required annual, quarterly, and monthly information for a kiln that is NOT monitored by a CEMS, locate the kiln in the CEMENT KILN SUMMARY table on the Subpart Overview page and click OPEN.

Step 6a: Additional Required Annual Information

Depending on the method selected for determining annual CO₂ emissions from raw materials you will be asked to provide more information. For each kiln for which the facility indicated that annual CO₂ emissions from raw materials are to be based on raw kiln feed, reporters will be asked to enter the following required information:

• The number of months a missing data procedure was used to determine a monthly quantity of raw kiln feed consumption used in the determination of the annual consumption quantity. You must enter a value in this field. If missing data procedures were not applied enter '0'.
• The number of times a missing data procedure was used to determine the organic carbon content of the raw kiln feed. You must enter a value in this field. If missing data procedures were not applied enter '0'.

Alternatively, for each kiln for which the facility indicated that annual CO₂ emissions from raw materials are to be based on consumption of individual raw materials, and for each raw material, enter the following required information:

• The number of months a missing data procedure was used to determine a monthly quantity of the raw material consumed used in the determination of the annual consumption quantity. You must enter a value in this field. If missing data procedures were not applied enter '0'.
• The number of times a missing data procedure was used to determine the organic carbon content of the raw material. You must enter a value in this field. If missing data procedures were not applied enter '0'.

When finished, click QUARTERLY INFO.

Step 6b: Additional Required Quarterly Information

For each quarter and for each kiln, enter the following required information:

• Wiki Markup
  An indication if a missing data procedure was used to determine the quantity of cement kiln dust (CKD) not recycled to the kiln \[98.86(b)(14)(iv)]

• Wiki Markup
  An indication if a missing data procedure was used to determine the fraction of non-calcined CaO in CKD not recycled to the kiln \[98.86(b)(14)(v)]

• Wiki Markup
  The method used to determine the fraction of non-calcined CaO in CKD not recycled to the kiln \[98.86(b)(9)]

• Wiki Markup
  An indication if a missing data procedure was used to determine the fraction of non-calcined MgO in CKD not recycled to the kiln \[98.86(b)(14)(v)]

• Wiki Markup
  The method used to determine the fraction of non-calcined MgO in CKD not recycled to the kiln \[98.86(b)(9)]

When finished, click MONTHLY INFO.

Step 6c: Additional Required Monthly Information

• Wiki Markup
  An indication if monthly kiln-specific clinker factors were used to determine monthly clinker production \[98.86(b)(15)]

• Wiki Markup
  The method used to determine the monthly clinker production \[98.86(b)(15)]. A drop-down menu is provided reflecting provisions in 98.3 and 98.84(d).

• Wiki Markup
  The method used to determine the fraction of non-calcined CaO in clinker \[98.86(b)(7)]. See 98.84(g) for more information on applicable methods.

• Wiki Markup
  The method used to determine the fraction of non-calcined MgO in clinker \[98.86(b)(7)]. See 98.84(g) for more information on applicable methods.

• Wiki Markup
  An indication if a missing data procedure was used to determine the monthly clinker production \[98.86(b)(14)\(i)]

• Wiki Markup
  An indication if a missing data procedure was used to determine the fraction of total CaO in clinker \[98.86(b)(14)(ii)]

• Wiki Markup
  An indication if a missing data procedure was used to determine the fraction of total MgO in clinker \[98.86(b)(14)(ii)]

• Wiki Markup
  An indication if a missing data procedure was used to determine the fraction of non-calcined CaO in clinker \[98.86(b)(14)(iii)]

• Wiki Markup
  An indication if a missing data procedure was used to determine the fraction of non-calcined MgO in clinker \[98.86(b)(14)(iii)]

When finished, click FINISHED to save your data and return to the Subpart Overview page.

Step 7: Repeat Steps 1-6

Repeat Steps 1-6 until all kilns that are NOT monitored by CEMS have been added for your facility, then proceed to Subpart H Emissions Information for Kilns NOT Monitored by CEMS.

#Back to Top

See Also

Screen Errors
Using Cal e-GGRT to Prepare Your Subpart H Report
Subpart H Summary Information for this Facility
Subpart H Kiln Information for Kilns Monitored by CEMS
Subpart H Emissions Information for Kilns NOT Monitored by CEMS
Subpart H Emissions Information for Kilns Monitored by CEMS
Subpart Validation Report