Subpart N Summary Information for this Facility
Note: The Cal e-GGRT help system includes general instruction on using the California GHG reporting tool. However, the help system may not explain differences between California and U.S. EPA reporting requirements. Please refer to the ARB reporting website for California-specific reporting requirements and additional help.


This page provides a description of how to enter Subpart N Glass Production summary information about this facility.

Adding or Updating Summary Information for this Facility

To add or update summary information for this facility, locate the SUBPART N SUMMARY INFORMATION FOR THIS FACILITY table on the Subpart Overview page and click OPEN. While this information can be entered at any point, we recommend that you complete this form last after entering other required information.

Click image to expand

Subpart N requires you to report the following data about your facility:

  • The total number of continuous furnaces in your facility used to produce glass
  • The total annual quantity (short tons) of glass produced across all continuous glass melting furnaces in your facility

Cal e-GGRT WILL calculate these two values based on information you entered for individual furnaces. So, again, you do not need to complete this field; Cal e-GGRT will automatically populate these fields as you complete other forms. Just be sure to check the value before you submit your Subpart N report.

Subpart N also requires you to report:

  • The total annual quantity (short tons) charged across all continuous glass melting furnaces of the following carbonate-based raw materials. Enter “0” for those carbonates not consumed or used in producing glass at your facility for the reporting year:
    • Limestone
    • Dolomite
    • Sodium carbonate
    • Barium carbonate
    • Strontium carbonate
    • Lithium carbonate
    • Potassium

In addition, §95116 requires you to report:

  • Annual quantity of fiberglass pulled from the facility
  • Annual quantity of container glass pulled from the facility
  • Annual quantity of flat glass pulled from the facility

These values must be entered into Cal e-GGRT.

When you have entered the required information, click SAVE. You should then return to the Subpart N Overview page.

Click image to expand

#Back to Top

See Also

Screen Errors
Using Cal e-GGRT to Prepare Your Subpart N Report
Subpart N Furnace Information
Subpart N Emissions Information for Furnaces NOT Monitored by CEMS
Subpart N Emissions Information for Furnaces Monitored by CEMS
Subpart Validation Report

This web site is maintained by a contractor to the California Air Resources Board (RY2015.R.03)